Embed Size (px)
Citation preview
Monitor Mounting Optional Swing BracketAssembly Mounting
BinMinderTM
The Unsurpassed Power & Versatility of 32 Bit Digital Signal Processing
Underwater Interface Detector
System Installation
BinMinder 9300 installation is quick andeasy. Threaded transducer housingsprovide simple connection to standardconduit or pipe. Mounting brackets andhardware are available for transducersand processors.
When necessary, swing bracket assemblyallows passage of surface skimmerequipment without losing measurement.
Engineered installation systems andfixtures are designed and fabricated tomeet the requirements of tanks andvessels with special installationrequirements.
Measurement Type
Measurement Range
Distance of Transducer from Processor
Outputs
Power Requirement
- single beam,
Underwater acoustic sensor, 6 full beam.
- minimum range: 1 ft.,Maximum range: 328 ft., Accuracy: 0.1 ft.
-1500 ft.
- 4-20mA Current Loop (4), 10 ampcontact relays (4), Serial Port for Rs232 andRS 485 interface.
- 110/220 VAC,50/60 Hz, 100 Watts
°
Specifications
Options & Accessories
Corporate Offices
Temperature Range
Mechanical
Approvals
-
Processor: -40 to +140 F (-40 to +60 C)
Standard Transducer: -40 to +120 F (-40 to +50 C)
-Processor:
Housing, molded fiberglass polyesterNEMA type 4XWeight - 8 lbs.Size (nominal) - 10” x 8” x 6”
Standard Transducer:Material - PVC and epoxyWeight - 1 lb.
-CE, including Low Voltage Directive.Transducers certified to VDE standards foruse in Zone 1 hazardous areas are available.
° ° ° °
° ° °
WinBin Data Logger Software
Hi-temp & Chemical Resistant Transducers
Wireless Remote Signal Transmitter
Auto Flush Cleaning System
Entech Design, Inc.315 South LocustDenton, Texas 76201Ph 940-898-1173Fax 940-382-3242Email: [email protected]: http://www.entechdesign.comBinMinder is a product and Trademark of Entech Design, Inc.EDI Pub. No BMB0799, Copyright 1999 by Entech Design, Inc.All rights reserved
©
Visit our Website at www.entechdesign.com
Represented by:
BinMinder 9300 Underwater Interface Detector
BinMinder Provides Effective Process Control in Open & Closed VesselsOpen Tank Application
Typical Applications
Simple Installationfrom Walkways andOther Structures
BinMinder Transducer
Ranges to Materialfor Continuous Non-Contact ProcessControl
Municipal Water & Wastewater
Electric Power
Pulp & Paper
Primary & Secondary ClarifiersGravity ThickenersDissolved Air Flotation ThickenersRaw Water ClarifiersMedia Expansion in Gravity Filters
Bottom Ash Hoppers & TanksDewatering & Hydro BinsPyrite Holding & Transfer TanksSurge & Settling TanksFGD ThickenersSumps, Lagoons, Settling Ponds
Liquor Tanks
Mining & Mineral Processing
Chemical Process
Food Processing
Other Process Industries
Process ThickenersPaste ThickenersTailings Thickeners
Salt Brine Saturation TanksPhosphorous (P4) Tanks
Soaking Vats & Tanks
Raw Water ClarifiersWaste Water ClarifiersOil/Water SeparatorsSpecialty Liquid LevelSumps, Lagoons, Settling Ponds
Features:!
!
!
!
!
!
!
!
!
32 Bit Digital Signal ProcessingLow Cost Single & Multiple TankSystem ConfigurationsNo Moving Parts, No MaintenanceRequiredEase of Set-up & OperationConfigure up to Four Transducers,Four 4-20mA Outputs & Four StatusRelays to any Combination of 1-4Vessels with a Single ProcessorRS232/485 Output for Ease ofInterface with Existing DistributedControl SystemsOperator Control of Critical SignalParameters for Maximum PerformanceEffective in Applications up to 328 ft.Locate Transducer(s) up to 1500 ft.From Processor
Easy to use Membrane Keypad
LCD Display withMultiple StatusScreens
“Listening to Customers by Design”
LiquidLevel
RS232/485Output to RemoteDCS
Material/Sludge Level
Locate Processorup to 1500’ fromVessels
BinMinder’s SuperiorSignal Processing & Unique
Operator Control Features ProvideMaximum Performance even in
Harsh Environments
Cost Effective Multi-TankConfiguration
Simultaneous Liquid & SludgeLevel Monitoring
BinMinder 9300
