8/10/2019 Supports 20FRE

1/6

FRP "WEAR" PAD

FIG.210 - 20FRE

4REV:

Manufactured by Specialty Plastics

Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the

controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.

persons or transferred by any means to any locationoutside the United States without advanced written

permission from Exelis and approval from the U.S.Department of Commerce.

Information in this drawing is of a general nature.

Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User

should consult the manufacturer of the pipesupport for detailed design information and proper

selection of the pipe support for the application.

8/10/2019 Supports 20FRE

2/6

RUBBER COATED U-BOLT

FIG.226 - GENERAL DETAIL

11REV:

Manufactured by Specialty Plastics

Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unless

authorized in writing. This information is subject to thecontrols of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.

persons or transferred by any means to any locationoutside the United States without advanced writtenpermission from Exelis and approval from the U.S.

Department of Commerce.

Information in this drawing is of a general nature.Detailed design information (part thickness, load

ratings, etc.) are not part of this drawing. Usershould consult the manufacturer of the pipesupport for detailed design information and properselection of the pipe support for the application.

8/10/2019 Supports 20FRE

3/6

STEEL ANCHOR

FIG.230 - 20FRE

1REV:

R

Manufactured by Specialty Plastics

Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the

controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.

persons or transferred by any means to any locationoutside the United States without advanced written

permission from Exelis and approval from the U.S.Department of Commerce.

Information in this drawing is of a general nature.

Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User

should consult the manufacturer of the pipesupport for detailed design information and proper

selection of the pipe support for the application.

8/10/2019 Supports 20FRE

4/6

SMALL STEEL ANCHOR

FIG.232 - 20FRE

2REV:

R

Manufactured by Specialty Plastics

Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the

controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.

persons or transferred by any means to any locationoutside the United States without advanced written

permission from Exelis and approval from the U.S.Department of Commerce.

Information in this drawing is of a general nature.

Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User

should consult the manufacturer of the pipesupport for detailed design information and proper

selection of the pipe support for the application.

8/10/2019 Supports 20FRE

5/6

STEEL RISER CLAMP

FIG.240 - 20FRE

2REV:

R

Manufactured by Specialty Plastics

Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the

controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.

persons or transferred by any means to any locationoutside the United States without advanced written

permission from Exelis and approval from the U.S.Department of Commerce.

Information in this drawing is of a general nature.

Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User

should consult the manufacturer of the pipesupport for detailed design information and proper

selection of the pipe support for the application.

8/10/2019 Supports 20FRE

6/6

FRP "DUMMY LEG"

FIG.90 - GENERAL DETAIL

1REV:

Manufactured by Specialty Plastics

Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of Specialty

Plastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the

controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.

persons or transferred by any means to any locationoutside the United States without advanced written

permission from Exelis and approval from the U.S.Department of Commerce.

Information in this drawing is of a general nature.

Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User

should consult the manufacturer of the pipesupport for detailed design information and proper

selection of the pipe support for the application.