Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
MORSE GENERATORSTIER 4 FINAL 40KW AND 40CFM DIESEL GENERATOR
SUPPLIER TO THE FOAM/COATINGS INDUSTRY SINCE 2004
Our new Tier 4 Final Diesel Generator/Compressor Package features all the same great performance as our Tier 3 package but now in a Tier 4 emissions compliant version!
MODEL GC-40 AND GCRS40-40 T4F DIESEL GENERATORFEATURES:
• CUMMINS 3.8L Tier 4 Final Diesel Engine
• Diesel Exhaust Catalyst. No DEF Required
• Meets 2019 Emissions Standards
• High Temperature Coolant Shutdown
• Low Oil Pressure Shutdown
• Totally Enclosed Engine and Generator/Compressor Drive Sections
• New B-CAN Digital Interface for the Air Compressor/Generator
• Cooler Exhaust Plenum Transition for Ease of Ducting Unwanted Heat
• 40kW Generator 220 Volt Rated at 134 amps Three Phase and 141 amps Single Phase
• Remote Mount Volt/Amp/Hertz Panel
(wiring and external disconnect required)
• 2 Year/2000 Hour Engine Warranty Covered by CUMMINS*
• 1 Year Warranty on All Other Components
MODEL GCRS40-40 T4F OPTIONAL ROTARY SCREW AIR COMPRESSOR PACKAGE
• Air Compressor Mounted in Tandem with Generator Factory Set at 40 CFM at 125 PSI*
• Compressor Factory Filled with MORSE SCO-1000 Synthetic Oil Rated for 1000 Hour Interval Changes
• Belt Drive Adjustable Tensioner
• Air Cooled Oil Cooler with High Temperature Shutdown
*Engine registration must be initiated with CUMMINS by end user.
CUMMINS 3.8L Tier 4 Final Engine meets 2019 Emission Requirements which are Legal for Sale in All 50 U.S. Sates and Canada. Diesel Exhaust Catalyst, No DEF Required.
New Spin-on High-Efficiency Air-Oil Separator and Spin-on Oil Filter
Triple Cooler Package - Engine Radiator - Compressor Cooler - Charged Air Cooler - Easily Removed for Cleaning
Full Shift Polypropylene 40 Gallon Fuel Tank.Easily removable for installation through a 42” door.
Powder Coated Reinforced Steel Frame with Adjustable Mounting Locations
B-CAN Digital Interface for the Air Compressor/Generator Displays info for: Engine Oil Pressure, Engine Coolant Temp, Compressor Pressure, Engine Voltage, Maintenance hours and More!
Easy access to all the engine major service points: - Oil Filter - Fuel Filter - Fuel Pump - Oil Dip Stick
TIER 4 FINAL COMPLIANT ENGINE 40KW PLUS 40CFM
MADE IN THE USA
www.morseindustrial.caP.O. Box 1519 Stn MainAntigonish, Nova Scotia, Canada B2G 2L8Ph. 647-393-1212 Fax: 902-867-6211
For additional information, contact your authorized Morse Industrial Equipment Dealer
Morse Industrial Equipment reserves the right to make modifications or improvements
MODEL GCRS-40-40 T4F DIMENSIONSNote: Production Models May Vary From Illustrations
1
1
2
2
3
3
4
4
A A
B B
C C
D D
SHEET
30017
1 1 OF
REV
0
GCRS 40-40 T4F
Antigonish Nova ScotiaPhone: 647-393-1212
Fax: 902-867-6211
N/A
PATH
MATERIAL
G:\Engineering Documents\Inventor Files\30k\30017.dwg
9/27/2017DJHDRAWN
CHECKED
1=12C
DESCRIPTION
DWG NOSCALESIZE
UNMACHINED SURFACES
FRACTIONAL ` 1/16
DECIMAL ` .03
ANGULAR ` 1°
DO NOT SCALE
TOLERANCES
UNLESS NOTED
MACHINED SURFACES NOMINAL DIM.
0.000 TO 1.000 ` .010
1.001 TO 5.000 ` .015
5.001 TO 10.000 `.020
10.001 & OVER `.025
THIS DRAWING AND ALL ITS CONTENTS ARE PROPERTY OF MORSE INDUSTRIAL AND MUST NOT BE COPIED OR MADE PUBLIC. IT IS LOANED AND IS SUBJECT TO RETURN UPON DEMAND. THE INFORMATION CONTAINED IN THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE USED, DIRECTLY OR INDIRECTLY, IN ANY WAY DETRIMENTAL TO THE INTEREST OF MORSE INDUSTRIAL.
PROPRIETARY INFORMATION
73.50
44.50
38.50
57.00
Fuel tank can be taken offand mounting feet can be detached here
Controller enclosuremount can be detached here
** This is the width of the machine with the fuel tank and controller enclosure removed
20.50
25.25
26.25 n3.00 OD
EXHAUST
51.35
35.252.50
WEIGHT GCRS-40 1770 LBSGCRS-40-40 T4F 2070 LBS
*without fuel