zenithinteriors.comzenithinteriors.com

SUNDA

zenithinteriors.com

SUNDALike an archipelago, Sunda tables can cluster together creating interesting shapes and configurations.

SUNDA 1 AND SUNDA 2FEATURES Sunda 1Sunda 1 is a collection of plectrum shaped tables in three different heights and three top sizes that can be layered and clustered. The table base and top are manufactured from laser cut, sheet steel and available in a range of fifteen finely textured mineral based powder coat colours.Sunda 2Sunda 2 is a collection of tables with circular timber tops that sit upon a tubular steel frame in four diameter and height configurations. They nestle to provide a stunning multilevel centre piece table. The tops are finished in a reformed oak veneer which can be clear lacquered, stained or colour washed whilst the tubular steel frames are available in a fine textured, mineral coloured range of power coat finishes.

FINISHESSunda 1:Available in mineral powder coat colours. Sunda 2:Tops are finished in a reformed oak veneer which can be clear lacquered, stained or colour washed. Tubular steel frame are available in mineral powder coat colours. Refer to Allermuir Finishes Specification for a full range of coloursand edge detail.

CERTIFICATION

DESIGN Allermuir Design

zenithinteriors.com

SUNDA 1 AND SUNDA 2DIMENSIONS

SUN 101

SUNDA 1

SUNDA 2

SUN 102

SUN 201 SUN 202

SUN 203 SUN 204

SUN 103

375 40

548

5

345

550

510

285

1000

Ø

315

800Ø

525

425 460

345

375

600Ø

400Ø

zenithinteriors.com

SUNDA 1 AND SUNDA 2

STANDARD & OPTIONAL FEATURES/FINISHES SUNDA 1

SUN101375mm OH table

SUN102405mm OH table

SUN103345mm OH table

Fabricated sheet and tubular steel construction • • •Plastic glides • • •Available in all standard and select mineral powder coat finishes. Refer to Allermuir Finishes Specification. • • •

• Standard feature – Not available + Optional feature

STANDARD & OPTIONAL FEATURES/FINISHES SUNDA 2

SUN2011000mmDia table top

SUN202800mm Dia table top

SUN203600mm Dia table top

SUN204400mm Dia table top

Weight 10kg 7.5kg 5.0kg 3.5kgReformed Oak veneer face tops on 25mm MDF with a cutback, clear finish edge profile – ref group number 37. Refer to Allermuir Finishes Specification for edge detail.

• • • •

Tubular Steel frame available in all selected mineral powder coat finishes. Refer to Allermuir Finishes Specification

• • • •

Plastic glides • • • •

Oak veneer top can be stained or colour washed. Refer to Allermuir Finishes Specification

+ + + +

• Standard feature – Not available + Optional feature

zenithinteriors.com

SUNDA 1 AND SUNDA 2CARE & MAINTENANCEPeriodic maintenance is necessary to ensure long term durability and customer satisfaction. All products should be closely inspected each month.If any items show any sign of structural failure it should be taken out of service immediately.Chrome FramesClean Chrome with a good grade Chrome cleaner to maintain bright finish. Occasionally Chrome leakage can occur on products that have just been delivered, again clean with cleaner to eliminate.Epoxy Powder FramesClean using a damp cloth with a mild solution of soap and water.Plastic/Felt FeetNeed to be inspected and replaced if wornWood Seating and TablesWood is a natural product and owes its inherent beauty to the variations in colour, texture and grain which are not considered defects. Because of this, Allermuir cannot guarantee the exact matching of any of the wood items. Allermuir is also not able to guarantee matching of colours between batches, as wood ages naturally through time and exposure to sunlight. A thorough inspection should be made monthly to ensure that the joints have not become too loose. Take out of service immediately if this has occurred. Joints may become loose when people continually rock back and forth.Wood can be cleaned with a water soluble solution to remove build-up of grease and grime (remove any excess water immediately). Wood products should not be subjected to extreme temperatures, particularly heat, moisture and direct sunlight.FabricPlease follow specific manufacturing guidelines on the cleaning of fabric. Cleaning with the wrong substance could damage the fabric.LeatherCan be cleaned with a mild saddle soap.Table TopsClean with a soft damp cloth and mild detergent solution. Do not use abrasive cleaners.