Embed Size (px)
Citation preview
Engr. Sultan Said Faqir Electrical & Instrument Engineering & Construction, QA/QC, Pre, comm & Commissioning
Project Name: MA’ADEN WA’ADAL-SHAMAL phosphate Project Turaif [KSA]
Hanwha E & C/ FLUOR (KSA)
Email: [email protected]
Mobile: 00966-502235627/0581720925 .
To whom it may concern
I am applying for the capacity of Electrical & Instrument Engineer
I have been seeking just such an opportunity as this, and I believe my Education & Experience would be a
good match for your requirements.
I have done Bachelor’s Degree in Electrical Engineering from University of Engineering & Technology
Peshawar Pakistan in 1997.
I have acquainted myself with a range of skills that would allow me to blend you’re your organization’s
Culture and propel the team to new height of success.
Your company’s reputation, stability and integrity have encouraged me to pursue my career path with your
organization. I am very interested to work in the field of engineering and technological administration. I
have completed a wide range of subjects that essential as a firm base of knowledge and skills relevant to
the requirements of the management position. I believe that I can deliver all the tasks and responsibilities
entitled to me.
I welcome the opportunity to me at your convenience to discuss your current and future needs and how I
might serve them.
I appreciate your time reviewing my application, and it will be a pleasure for me to attend an interview with
you. You may reach me through my mobile or by the email address.
Thank you for your kind attention and consideration.
Together with this letter, I enclosed my resume for your perusal.
Kind Regards
Engr. Sultan Said Bin Said Fiqer Enclosures:
1. Resume
E & I /Project Engineer
Eng. Sultan Said Fiqer Electrical & Instrumentation Engineer with 15 years’ Field Experience in Constructions, QA/QC/ Pre, comm & Commissioning
Mobile No: 00966-50-2235627/0581720925
Email: [email protected]
Objectives:
To become a part of a dynamic group where I could further explore the skills and capabilities, which I
engaged in the whole academic career, and to serve in a challenging work environment and to gain equally
vas t opportunities of career development based upon achievements and results.
Academic information:
Bachelor degree in Electrical Engineering from University of Engineering & Technology Peshawar, PAK
Registered Engineer of Pakistan Engineering Council, Islamabad Pakistan
Professional Experiences:
Engineering, constructions, QA/QC, Pre, Commissioning & Commissioning of the industrial & high rice
building projects management, planning time scheduling of the projects , Involve in technical evaluation
with project construction engineering , fabrication, installation, designing work planning, Inspections,
testing as per International Electrotechnical Commission and Aramco Standard
( SAIP/SAMSS/STIPs/SAICs/SATRs/IEC/IEEE/ISO/EN/ANSI/BSI/ISO9000/ISO9001/IESO) standards &
also calibration n of the instruments and heavy equipment installations alignment, calculation of
construction , Inspections test Plans, Test packing & Work packing / documentation of mechanical
completion Pre-commissioning calibration of instrumentation and electrical equipment with system for
offshore platforms, chemical, refinery power generation industrial and petrochemical, Electronic railway
track system, application duties coated project estimated material included but we are not limited to
engineering Inspection safety, DCS control system, PLC, PMCS, SIS/ESD/F&A /P,S,control system,
MCC with DCS interface electrical control HT/HV/MV/LV, Cables & 132KV,GIS/33Kv/11Kv/415KV
Step-up & Step down/power/distribution & current transformation. Switch gear testing & commissioning
distribution (LOTO)rotation of equipment, piping, vessel, boiler, cool conveyers, HVAC, chillier safety
interlock/shutdown systems, fire alarm, public address and security y systems, lighting and small power
load calculation for high rise building, Building Management System (BMS), Telephone Date, CATV,
CCTV System for high rise building, lightning protection and earthling Installation, provide ability to
effectively manage multiple activities under tight times strains, in addition to salve problem
resolution associated challenging and trouble project
Handling Projects: 1.)Project Name: MA’ADEN [PAP] Phosphate Acid Project Turaif ( KSA)
Employer : Hanwha E & C/ FLUOR KSA
Period : April 16- 2015 to 30 April 16
Designation : QA/QC Engineer
Responsibilities: Preparation Project Inspections test Plans, Test packing documentation mechanical
completion of Electrical & Instrument Sub-Systems of the project turnover to client with QVD,
documentation mechanical completion CCW/MCW, pre commissioning team and Commissioning.
Collate Inspection Results, coordinate field inspection activities of HANWAH / E & C and Third Party
Inspection agencies. Which require to be addressed separately and need to be controlled through specific
procedures? Prepare accordingly documents relevant to data control, inspection reporting procedure,
technical queries and procedures Provide technical inputs for vendor queries, conformance reports and
non-conformance reports. Review vendor queries, CR (Conformance Reports), NCR, (Non Conformance
Reports) for possible resolutions and analyses fitness to purpose. Provide necessary recommendations that
need to be forwarded to the client support the commissioning team (LOTO) and supported documentation
monitor the site work plan and attend t h e weekly meeting
And Reported to client etc.
2.)Project Name ; Uthim ArAr / Uthim Hail Shopping Mall KSA Saudi Arabia
Employer : Seenat Construction Est / KSA
Period : Jan 2015 to 15 April 2015
Designation : Electro Mechanical Engineer
Responsibilities: Costing and Tendering the Project directs activities concerned with High Rice Building
Project’s systems installation, (BMS, HAVC, CCTV, CATV, FA, and PA) operation, directs activities of
engineers engaged in preparing designs plans to construction. lightning protection and earthling
Installation Provides engineering & technical direction for planning and projects Shop Drawing Reviews
plan specifications prior to instituting project to Coordinates with material procurement specifications to
prepare project proposals for negotiating production contracts discussions with contactor as pre project
time Scheduling Supervises coordinates activities of workers engaged in assembly, inspecting, and
testing of electrical equipment like 33Kva,11Kav Transformers, Bas bar riser, Chillers, LV,MV Switch
Gear &415KVA Power Distribution Board, Motors, generators, voltage regulators, capacitors, and
switches, applying knowledge of assembly techniques, machine setup, and testing Commissioning
procedures. Interprets blueprints, specific at...
3.Project Name; Vale Malaysia Minerals SDN BHD[VMM] Phase1, Malaysia
Employer : Arcadias & Towell Sdn. Bhd. (VMMP), (Brazil)
Period : Jul 2013 to Nov 2014
Designation : E &I /QA/QC Engineer
Responsibilities: Plan, coordinate and direct quality program designed to ensure consistency
With established standards’ ITP Establish proposed quality and inspectors over testing activities. Primary
Duties QA/QC Engineer has all the responsibility calibration of instrumentation and electrical equipment
with system of QC Inspector in addition to this he shall, Review contract documents to ensure
identification of quality requirements. Participate in internal & external audits and assessments. Supervise
Other Contractors QC personnel. Implement Project inspection and test Plans, collate Inspection Results,
coordinate field inspection activities of Vale and Third Party Inspection agencies. Which require to be
addressed separately and need to be controlled through specification procedures? Prepare accordingly
documents relevant to data control, inspection reporting procedure, technical queries and procedures
Provide technical inputs for vendor queries, conformance reports and non-conformance reports.
Review vendor queries, CR (Conformance Reports), NCR (Non Conformance Reports) for possible
Resolutions and analyses fitness to purpose. Provide necessary recommendations that need to be
forwarded to the client support the commissioning team and supported documentation monitor the site
work plan and attend the weekly meeting and Reported to client etc.
4.)Project Name; Safran Hambd Sendayen TAC Valley Seramban Malaysia
Employer : ALTOTEGAS ELECTRICAL & INSTRUMENT, (Malaysia)
Period : August 2012 to Jun 2013
Designation : Construction Manager
Responsibilities: Constructions & Manage the project construction and technical Engineering pending
issues designing shop drawing Electrical and instruments work, procurement and work plan for
construction completed documentation mechanical compaction of the project hand overrunning to client
leading QA/QC, pre commissioning team and Commissioning.
5.) Project Name; alliance LNG Re-gasification Offshore Berth & Subsea
Pipeline
Employer : RANHILL WORLEY PERSON, (Australia)
Period : November 2011 to July2012
Designation : E&I Project Engineer
Responsibilities: Construction & Engineering for construction of the project onshore & offshore and
scheduling ship loading and Consisted completed installation of electrical and instrument equipment’s
included Designing issues shop drawing, red line and mark up drawing as for site construction
requirement, up dated documentation, included instrument calibration handling QA/QC Electrical &
Instrumentation Mechanical & Completion, pre commissioning& Commissioning also. Handover to
Operation
6.) Project Name; Laynas Advance Material Industrial Area GEB Malaysia
Employer : ROTARY (MAC) MALAYSIA SDN BHD, Singapore
Period : January 2011 to November 2011
Designation : QA/ QC manager
Responsibilities: Involve in the project hand over documentation mechanical completion instruments
calibrations procedure & test packing of Electrical & Instrument Sub-Systems as per Project
specification and (ISO) standards, work pack for electrical and instruments pre loading system of the
project including pre commissioning and commissioning also relay calibration
33kv/11kv/415transformer man substation, distribution MCC and motor control system. Electrical
Intelligent network with PLC system, including project management manpower management cost
management & over all enounce of quality work man ship delivered to client.
7.) Project Name;G+45 F, Al Majaz Hotel Continental Consultant & Engr.UAE
Employer : CONTINENTAL CONSULTANT, LLC, United Arab Emirates
Period : July 2007 to Dec 2010
Designation : Electro Mechanical Engineer
Responsibilities: Engineering & Construction of high rice building & (MEP/BMS) Project Electrical load
Calculation, Shop Drawing and designing telephone, date, CATV, CCTV, HVAC, chillers including
firefighting also public security system tendering the project with specification inspection and manage the
contractor with project completion time & date scheduled commissioning etc.
8.) Project Name; Tanjugbin 3X700MV Coal Fired Power Plant Malaysia
Employer : MCIE SDN BHD, Malaysia
Period : July 2006 to March 2007
Designation : E &I /QA/QC Supervisor Responsibilities: QC Participate in internal & external audits and assessments. Supervise Other
Contractors QC personnel. Implement Project inspection and test Plans, collate Inspection Results,
coordinate field inspection activities of Sumitomo and Third Party Inspection agencies. Identify specific
requirements in the contract, which require to be addressed separately and need to be controlled through
specific procedures. Prepare accordingly documents relevant to data control, inspection reporting
procedure, technical queries and procedures for concessionary reports. Coordinate all inspection
requirements. Set up a system for tracking inspection notifications and execution of inspection until a
release note is issued. Control the number of inspection. Its compliance to approved data sheets drawings,
witness testing as approved by ITP. Produce necessary inspection report and release
Notes. Integrate with and work alongside the quality team and perform all related tasks as and when
requested by the supervisor. Provide technical inputs for vendor queries, conformance reports and non-
conformance reports. Review vendor queries, CR (Conformance Reports), NCR (Non Conformance
Reports) for possible resolutions and analyses fitness to purpose. Provide necessary recommendations that
need to be forwarded to the client.3.3 KV Rotary hammier in tow (2) tripper car units and other ancillary
equipment requirements of the project system with. DCS and PLC system including operation and
maintenance i n c l u d i n g 3.3 KV/11KV/415V main and satellite substation distribution system
electrical intelligent network with PLC & DCS system.
9.) Project Name;TanjungBin 3X700 MV Coal Fired Power Plant MALAYSIA
Employer : ISHIPOWER /CONCORD ENINEERING SDN BHD, Japan
Period : Dec 2004 to Jun 2006
Designation : Electrical /QA/QC Supervisor
Responsibilities: Coordinate inspection activities with in discipline in accordance with the relevant
Inspection and Test Plan. To Read and understand the ITP requirements for quality on the Project
identified with the Project Specifications and Procedures and Ensure that inspection activities and
acceptance criteria are clearly understood to subcontractor and the discipline inspectors. Liaise with the
Discipline Supervisors and the Company with regard to inspection requirements and acceptance criteria.
Discuss and resolve, if possible, problems relating to quality with the company representative, always
reporting back to the Project Quality Manager. Verify and approve quality control records within
discipline ensuring that records are generated accurately and expeditiously by the subcontractor in
accordance with the relevant ITP. Record and control all non-conformances raised within discipline and
monitor the implementation of any corrective action. Report any non-conformances found during
inspection coordination with the QC Inspectors Project Quality Manager.
10.) Project Name; Manjung 3X700MV Coal Fired Power Plant Mnj. Malaysia
Employer : ALSTOM CONSORTIUM / KENTZ PERMBA, (France
Period : Dec 2001 to Nov 2003
Designation : Electrical Engineer.
Responsibilities: Overall site construction engineering and supervision of boiler bunker and cool
conveyor Equipment installation of coal conveyor to boiler bunkers including fly ash and bottom ash
conveyor to ash pond equipment inclusive in system commissioning are magnetic separator tramp
detectors, coal analyzers. 3.3. KW rotary hammer coal crushers, chute actuator, screw conveyor12 dust
extraction units 2 tripper car units and other ancillary equipment’s. Scope of work included but not
Limited to project management, manpower/m hour management, cost management and overall enounce of
quality. Workmanship delivered d to client
11.) Project Name Optimal Olefain Project Union,C /Petronas Malaysia
Employer : SAMSUNG ENGINEERING (M) SDN BHD,( Korea )
Period : November 2000 to Nov 2001
Designation : Instrument Engineer
Responsibilities: Construction installation and process instrumentation with DCS, PMCS, SIS system
Mechanical completion, Pre-commissioning & commissioning including process operations and support
facilities, security system electrical heart trace controls simulation Distribution, ambient and process
analyzers, security system, electrical heart trace also Procurements, cost estimation.
12.)Project Name;Centralized Utility Facility Petronas Project Malaysia
Employer ：FOSTER WHEELER INTERNATIONAL (M) SDN BHD, (England)
Period ：June 1999 to Nov 2000
Designation ： Electrical Supervisor
Responsibilities: Main scope of work installation of electrical & instruments equipment’s for complete
plant system including 6G, 45 MW cogon units, denier water, oxygen and nitrogen manufacturing as well
as safety and alarm system. In addition, was responsible for organization and completion of loop check
dossier and P&ID to ensure start up and commissioning procedures for mechanical equipment and gas
turbines were adhered to additional responsibilities included the coordination and management of labor
and procurement of materials required to clear punch list items in order to support commissioning
activities and schedules.
13.)Project Name; PETRONAS KR2 Aromatics Project Kertih TRG Malaysia
Employer : TOYO ENGINEERING (M) SDN BHD, japan
Period : June 1998 to June 1999
Designation : Electrical& Instrument supervisor.
Responsibilities: Responsible for coordination and monitoring of installation, QA /QC testing and
commissioning associate d with all mechanical & electrical requirements of the project system included
33 KV/11KV/3.3 KV/415 V main and satellite substation distribution system, Electrical intelligent
network DC, PMCS, SIS system, fire monitoring and protection equipment.
14.) Project Name; BASF PETRONAS Chemical Project Pahang Malaysia
Employer : CARLOGAVAZIE (M) SDN BHD, Italy
Period : May1997 to May 1998
Designation : Instrument technician.
Responsibilities: Responsible for the complete installation of DCS control system, non-endive and
intrinsic instrument System, MCC, s motor and motor control system,6 compressor stations and all inter
connecting instrument s piping for feed treatment. Flare Water system, steam and condensate, nitrogen
and instrument air, star t-up of electrical system and mechanical commissioning engineer prior to system
hand over in addition to material organization, material specification and procurement, development of
database to track installations on. Supervisor of filed supervisors and monitoring of all bench alignments
for filed installations.
15.)Project Name; PETRONAS Gas BHD GPP 5&6 Project Trg Malaysia
Employer : DAELIM ENGINEERING (M) SDN BHD, Korea
Period : August 1996 to May 1997.
Designation : Electrical Technician.
Responsibilities: Consisted of the complete installation of a Foxboro1/A 12 node, 30 tower DCS system
with operations, and maintenance works stations. Designed and installed cable tray for Electrical cabling.
Complete install actions of all power control and DCS cabling &associated instrumentation piping and
update documentation to reflect deviations and changes, Complete electrical installation for the tank farm
project including 6 spherical tanks, 5 horizontal tanks,3 enclosed, and I floating lid tang, as well as 8 truck
loading stations. Also included were 10 BLH weighing system ambient air analyzer systems. DCS control
system with MCC interface and regular and emergency area lighting.
16.)Project Name; PETRONAS Refinery PSR2 Project Malacca Malaysia
Employer : CHYODA ENGINEERING SDN BHD, Japan
Period : January 1996 to August 1996.
Designation : Electrical& Instruments technician.
Responsibilities to for the installation, control system, shutdown system, 11 process and ambient air
analyzers, fire alarm and PA system Developed and monitored index data to prioritize and track installation
activities to support commissioning activities. Interfaced and coordinated with subcontractors in order assist
in organization of filed Instruments Installation supervision.
Professional Certification:
Certified Professional Engineer
Oil & Gas Safety Passport (NIOSH). Combined Sea Survival, First Aid, Bosiet Training
Training OGSP + CIDB.
Luck out take out (LOTO) Microsoft Excel, Word, Power Point. Auto cad
Personal Information:
Name : Sultan Bin Said Faqir
Date & place of Birth : Peshawar (Pakistan) 01/04/1977
Nationality : Pakistani
Language : English, Arabic, Hindi, Malay, Pashto
Current Country : Saudi Arabia
Visa Status : Resident Visa (Transferable)
Driving License : Saudi Arab (KSA)
Notice Period : Immediate Joining
Relocation : Willing to Relocate
Expected Salary : Negotiable
Total Experience : 15+ Years
References:
1. Loong Mun Lok (Project Manage) ([email protected])Tel: 0060-012-7641255
Concord Electrical SDN BHD (Malaysia)
2/ MR Chew See Seng( Project Director) ( [email protected])Tel: 006-012-6087257
Altotegas SDN BHD. (Malaysia)
3/ MR Satish Kumar (Construction Manager) ([email protected] ) Tel: 006-019-9532077
Technip Engineering SDN BHD. (Malaysia)
4/ Muhammad Amir Engineering. Manager) ([email protected])Tel: 00971-507919826
Continental Consultant & Engineering (UAE)
5/ Muhammed Alrefaie .CEO. ([email protected]) Tel: 00966-59-3025664
Seenat Construction & Engineering (KSA
