Subsea Systems and Services - Norwegian Suppliers · Subsea studies and engineering. 2020-01-15 - Aker Solutions Category: Engineering & Services Subcategory: Subsea Engineering Type:

Subsea Systems andServices- Gateway to Norwegian world class technologyand competence

REPORT TYPE 05.Jun 2020

Complete Subsea Systems and Services Catalogue

Annulus Monitoring (AMOS™)

2019-11-06 - 4Subsea

Category: Engineering & ServicesSubcategory: Pipeline & Riser EngineeringType: Service

4Subsea’s annulus monitoring solution AMOS™ provides safe and cost-effective operation offlexible risers. The system monitors the riser annulus diffusion rate, detecting early signs of riserfailure, reducing risk and averting potential costly replacement of risers. AMOS™ enables safeoperations and improved decision-making, averting costly unplanned replacement of risers.

4Subsea’s AMOS™ is a continuous annulus monitoring system for new and existing (retrofit)flexible risers. It uses a patent pending method to detect failures such as outer sheath damagesand blocked ventilation ports early on, hence preventing costly replacements, shutdowns andaccidents. AMOS™ also provides the option of automated annulus free volume testing as well asautomated nitrogen annulus testing.

Technology readiness level (TRL)

According to API RP 17N

TRL 7: Proven technology integrated into intendedoperating system. The technology has successfullyoperated with acceptable performance and reliabilitywithin the predefined criteria

Reference

4subsea websiteAnnulus Monitoring (AMOS™)

Contact

[email protected]+47 66 98 27 00https://www.4subsea.com

https://www.4subsea.com

http://norwegiansuppliers.no/company/4subsea-156


https://www.4subsea.com/solutions/flexible-risers/annulus-monitoring/

mailto:[email protected]


Subsea studies and engineering

2020-01-15 - Aker Solutions

Category: Engineering & ServicesSubcategory: Subsea EngineeringType: Service

Aker Solutions is in position to conduct all kinds of studies and engineering. This ranges from earlyfield acrchitecture studies and down to detailed studies. E.g. Appraisal, Feasibility, Concept, FEEDand Detail Engineering. For nearly 50 years Aker Solutions engineers have designed anddeveloped products and technologies to solve the industry's challanges in field development. Thefollowing elements distinguish Aker Solutions services:- Work concurrently in multidisciplinary teams- Include reservoir, flow assurance, and facility design expertise- Hands on experience with state of the art technologies and products- Project managers and technical experts with holistic view- Feed knowledge from engineering, construction and all kind of operations back to front end team



Not applic: Not applicable.

Reference

Aker Solutions capabilitiesContact

Per Kristian BruunDepartment Manager [email protected]+47 906 15 710www.akersolutions.com

http://www.akersolutions.com

http://norwegiansuppliers.no/company/aker-solutions-145

http://www.akersolutions.com/what-we-do/




General subsea system service


Category: Engineering & ServicesSubcategory: OtherType: Service

Aker Solutions is a global provider of Subsea Production Systems (SPS) and SubseaUmbilical/Riser/Flowline systems (SURF) supplying studies, design, engineering, products andservices to the global oil and gas industry. We have been in the oil & gas industry for nearly 50years, and offer today the industry's most complete portfolio of intelligent and differentiatedsubsea technologies with a global manufacturing and service infrastructure.Aker Solutions is at the technology forefront - driving future field developments.Our subseaprocessing and boosting solutions are paving the way for exploring deeper waters, complexreservoirs, difficult fluids and longer step-outs. Through focus on digitalization, Aker Solutions hasintroduces "Intelligent Subsea" enhancing recoverey and saving cost.




Reference









Subsea Products


Category: Subsea Systems (Hardware)Subcategory: OtherType: Product

Aker Solutions provides following portfolio of technologies and products:#Control System (Vectus 6.0).#Intervention & workover systems (X_vendor).#Manifold, structures, templates#El actuator (ELDRIVE)#Power and process systems#Subsea compression systems#Subsea pumps systems#Subsea x-mas trees ( vertical & horizontal)#Installation tools#Well heads#Tie-in & connection systems ( vertical & horizontal)#Control umbilicals ( Electro/hydraulic)#Power umbilical#Flowline heating systems (DEH, Integrated prod.umb.)#HP drilling, production and workover risers#Pipeline/flowline engineering#Riser bases#Pipeline end terminations ( PLEM/PLET)




Reference


Per Kristian Bruun




Department Manager [email protected]+47 906 15 710www.akersolutions.com




Life of Field Services


Category: Engineering & ServicesSubcategory: Technical ServicesType: Service

Assets deserve a safe, long and productive life from initial concept selection, through dtaileddesign and fabrication, followed by optimised operation into final decommissioning. Aker Solutionswould like to be proactive partner throughout your field's lifetime and provide latest technologyand high quality services. We are at your service to maintain, operate and upgrade your facilitiesthroughout the lifetime of your fieldThrough Aker Solutions regional services bases and central support we can deliver globalintegrated subsea Lifecycle Services including:- Installation and commissioning of systems- Maintenance, repair and spares supply- Refurbishment and rectification- Operational and technical support- Assets integrity management services- Condition monitoring




Reference









Riserless Well Intervention (RLWI)

2020-01-27 - AKOFS Offshore

Category: Marine Operations, Intervention & Subsea ServicesSubcategory: Light Well InterventionType: Service

AKOFS Offshore is a provider of vessel-based subsea well construction and intervention services tothe oil and gas industry.

With AKOFS’s Riserless Light Well Intervention (RLWI) solution Operators are enabled to increasethe oil and gas recovery rate from subsea oil wells without having to use semisubmersible drillingrigs or drill ships.

RLWI is currently offered from AKOFS’s state of the art DP3 monohull vessel, the AKOFS Seafarer,and would typically include services such as:

- Wireline / wireline tractor conveyance- Downhole mechanical work- E-line/Logging services- Change-out/installation of subsea trees- Pumping operations including killing operations- Plug and abandonment of subsea wells- IMR and subsea services work




Reference

AKOFS Offshore signs contract with EquinorContact

Frank WillumsenBusiness Development and

http://www.akofsoffshore.com

http://norwegiansuppliers.no/company/akofs-offshore-285

http://www.akofsoffshore.com/news/AKOFS-Offshore-signs-contract-with-Equinor/

Chartering [email protected]+47 23 08 44 00www.akofsoffshore.com




Subsea Installation and Intervention


Category: Marine Operations, Intervention & Subsea ServicesSubcategory: Seabed InstallationType: Service


AKOFS currently offers highly efficient subsea intervention from two specialised SubseaEquipment Support Vessels (SESV). The services include installation, retrieval, testing andmaintenance of subsea and top section downhole equipment to water depths of up to 2,500meters. By using a fibre-rope based deployment system, deck skidding, dual test-stations and asubsea orientation equipment system, the Skandi Santos and the Aker Wayfarer offers significantefficiency gains to deepwater operations.

The neutrally buoyant fibre rope provides no reduction in installation weight capability withincreasing water depth. Aker Wayfarer has installed 270 MT manifold on 2300m.




Reference

Aker Wayfarer Wins Five-Year Contract from PetrobrasContact

Frank WillumsenBusiness Development andChartering [email protected]+47 23 08 44 00www.akofsoffshore.com



http://www.akofsoffshore.com/news/Aker-Wayfarer-Wins-Five-Year-Contract-from-Petrobras/




Riserbased Light Well Intervention (LWI)


Category: Marine Operations, Intervention & Subsea ServicesSubcategory: Light Well InterventionType: Service


With AKOFS’s Riserbased Light Well Intervention (LWI) solution Operators are enabled to increasethe oil and gas recovery rate from subsea oil wells. Working through a riser Operators can, inaddition to the services provided through RLWI, add capabilities like coiled tubing, well test andclean-up, chemical injection, circulation, sand removal, scale milling, etc.

The AKOFS Seafarer is designed and equipped for riserbased deepwater well interventionoperations. This has been performed by this vessel for water depths down to 1500m.




Reference

AKOFS ServicesContact

Frank WillumsenBusiness Development andChartering [email protected]+47 23 08 44 00www.akofsoffshore.com



http://www.akofsoffshore.com/our-services/our-services/




Riser and Umbilical Pull-in Operations

2020-02-17 - Axess Group

Category: Hardware Umbilicals & FlowlineSubcategory: Risers, Flowlines & Tie-insType: Service

A pull-in operation is a complex matter with interfaces between multiple contractors anddisciplines. The equipment is heavy, and the operations often include installation in confinedspaces with difficult access. In addition to this, we often find that a material handling plan for theinstallation of the equipment is not available.

Axess provides a complete package covering all requirements for a successful pull-in operation.Our deliverables include engineering (material handling planning, method statement, structuralcalculations), design & supply of winches/lifting equipment and execution offshore (rope access,rigging, inspection & certification of lifting gear - Axess is an EoC)




Reference

Solutions for the SURF industryContact

Knut StefanussenChief Commercial [email protected]+47 979 51 301www.axessgroup.com

http://www.axessgroup.com

http://norwegiansuppliers.no/company/axess-group-148

https://www.axessgroup.com/market-sector/surf/



http://www.axessgroup.com

CAN-Integrator

2019-11-19 - Can by Neodrill

Category: Marine Operations, Intervention & Subsea ServicesSubcategory: Seabed InstallationType: Product

CAN-integrator represent a new generation of better and smarter subsea wells, facilitating earlyproduction by enabling pre-rig well construction and marine operations.Acting as an integrator between drilling, SPS (Subsea Production System) and SURF (Subsea,Umbilical, Riser, Flowlines) installation operations, SPS equipment is mounted on the CAN, in theworkshop prior to subsea installation.Once installed, the CAN fixes the exact well location and can be used as a hub to perform pre-rigwell construction. In doing so, well construction, SPS/SURF installation and testing can all takeplace prior to the rig arriving on location.




Reference

CAN-IntegratorNeodrill

Contact

Jostein [email protected]+47 911 13 138www.neodrill.com

http://www.neodrill.com

http://norwegiansuppliers.no/company/can-by-neodrill-176

https://www.neodrill.com/production

https://www.neodrill.com/


http://www.neodrill.com

ClampOn Subsea Corrosion-Erosion Monitor

2019-09-25 - ClampOn

Category: Subsea Systems (Hardware)Subcategory: Controls & MeasurementType: Product

The Subsea CEM (Corrosion-Erosion Monitor) is a non-intrusive ultrasonic instrument designed tomeasure wall thickness loss in pipes at a defined area. It uses ultrasound and acoustic guidedLamb Waves to detect the changes in wall thickness over time.

Corrosion and erosion are recognized as some of the most seriuos problems facing the industriesworld wide, and result in losses worth hundreds of billions of dollars every year. Major savings canbe realized by installing the CEM subsea as it enables the operator to monitor the condition oftheir pipes and determine inspection intervals more accurately, and ensure safer and more costeffective operation.




Reference

ClampOn Subsea Corrosion-Erosion MonitorContact

Tonje DahlMarketing [email protected]+47 55 94 88 50www.clampon.com

http://www.clampon.com

http://norwegiansuppliers.no/company/clampon-149

https://www.clampon.com/products/subsea/corrosion-erosion-monitor-2/



ClampOn DSP Subsea Particle Monitor

2019-09-25 - ClampOn


The ClampOn Subsea Particle Monitor is a non-intrusive instrument using passive acoustic andultrasonic technology. It detects the amount of sand/particles passing through the inside of thepipe. The instrument has onboard Digital Signal Processing (DSP) for analysing of the collecteddata and sends real-time results to control system, giving the operator immediate warning if sandis being produced.

It is designed for depths to 3000 meters and has full redundancy, for high reliability throughseasons with reduced access. Operators are using particle monitors widely to increase productionrate by finding a maximum sand free rate. By monitoring and evaluating the data in real-time, theoperator can make immediate decisions to ensure safe production.




Reference

ClampOn websiteClampOn Subsea Particle Monitor

Contact




https://www.clampon.com/

https://www.clampon.com/products/subsea/dsp-subsea-particle-monitor/



ClampOn Subsea 3D Vibration Monitor

2019-09-25 - ClampOn


The Subsea vibration monitor is non-intrusive. It takes use of 3-axis accelerometer to monitormovements at subsea structures and pipes. It can monitor in both high and low frequency areas,making it possible to minimize risk of fatigue failure of pipes and other structural components. Itcan be supplied for permanent installations or for temporary inspections as a battery empoweredsolution.Typical sources of vibration include vortex induced vibration (VIV) and flow induced vibration (FIV).This instrument has become a valuable tool to monitor the state of the subsea pipework andstructures. In several cases the application has enabled the operator to safely increase productionas the measured level of vibration has been less than conservative models predict.




Reference

Subsea 3D Vibration Monitor WebsiteContact




https://www.clampon.com/products/subsea/subsea-3d-vibration-monitor/



Passive Heave Compensation

2020-02-13 - Cranemaster


• Cranemaster® units with load range from a few tons up to 1600 tons. From compact shockabsorbers to advanced passive heave compensation systems with adaptive change of settingsduring each phase of the lifting operation.• Feasibility studies to determine the operational benefits of using Cranemaster®.• Lift analysis. Our engineering department can assist with analysis of all lifting phases.

• Increase in offshore crane lifting capacity.• Reduction of DAF in offshore lifts.• Expansion of weather window for splash-zone crossing.• Resonance avoidance during subsea lowering operations.• Reduction of landing speed and motion for subsea installation.




Reference

A selection of referencesContact

Mente BaakGlobal Sales [email protected]+47 35 96 34 07www.cranemaster.com

http://www.cranemaster.com

http://norwegiansuppliers.no/company/cranemaster-82

https://www.cranemaster.com/references/



Cranemaster shock absorbers and heave compensators

2020-02-13 - Cranemaster


Cranemasterunits are mounted between the crane hook and the load, expanding your vesselcapabilities while protecting crane and personnel. Our engineering department can assist withanalysis of all lifting phases.

Common applications:• Increase in offshore crane lifting capacity.• Reduction of DAF in offshore lifts.• Expansion of weather window for splash-zone crossing.• Resonance avoidance during subsea lowering operations.• Reduction of landing speed and motion for subsea installation.• Protection of crane/winch during subsea recovery and decom operations.• Load tensioning for air or subsea installations.• Protection of equipment and personnel from shock loads.




Reference

A selection of referencesContact

Mente BaakGlobal Sales [email protected]+47 35 96 34 07www.cranemaster.com


http://norwegiansuppliers.no/company/cranemaster-82

https://www.cranemaster.com/references/



Subsea Well Protection Structure

2020-01-12 - CSUB AS


CSUB has developed a new GRP Single Well Protection Structure combining requirement forovertrawlability design with the need for full ROV access to the Wellhead.

CSUB patented in-house design has been developed as an alternative to the traditional steelprotection structure. The structure has features such as:

Self penetrating skirts for stabilization – skirt height approx 1.5m depending on soil conditionsLarge openings on every side for good ROV accessTop hatches providing access for well operationsRemovable bridge design allowing for spool installation post protection structure installation



TRL 5: Technology integration tested Full-scale prototypebuilt and integrated into intended operating system withfull interface and functionality tests

Reference

Link to webpageContact

Jon Inge BrattekåsSVP Market & [email protected] 61 442www.csub.com

http://www.csub.com

http://norwegiansuppliers.no/company/csub-as-327

https://csub.com/products/wellhead-protection-structure/


http://www.csub.com

Subsea hatches

2020-01-12 - CSUB AS

Category: Subsea Systems (Hardware)Subcategory: Subsea FacilitiesType: Product

A lightweight alternative to hatches on subsea structures and XTs.

CSUB has supplied several hatches for XT, manifolds, templates and ITS. Typical features forhatches are GRP locking pins and the possibility of including buoyancy elements to reduce theoverall submerged weight hence making the hatch ROV operable.

Hatches in GRP provides several advantages:

- Reduced weight of overall structure- Good impact energy absorption- Hatches can be made subsea replaceable




Reference

Link to CSUB homepageContact


http://www.csub.com


https://csub.com/products/hatches/


http://www.csub.com

CSUB Subsea Support System

2020-01-12 - CSUB AS


GRP Support Structures provide support for pipelines, subsea structures and equipment.

CSUB GRP products for supports are GRP Foundations/Sleepers, Buckling Mitigation Sleepers,Caternary Supports, Free Span Correction Foundations, Pipeline/Flexible Crossings and Landingarea for Flexible Risers.

- Major benefit at soft soil areas – lower impact to soil – improved bearing capacity- For seismic areas – liquified soil- Can be stackable – reduce transportation and installation cost




Reference

Link to CSUB product pageContact


http://www.csub.com


https://csub.com/products/support/


http://www.csub.com

Fabrication of GRP Protection Structures

2020-01-15 - CSUB AS


The combination of strength and flexibility of the GRP material used in the CSUB Protection Coversprovide unique properties to absorb energy from dropped object/trawls. Testing has beenperformed up to more than 300 kJ, and based on these result we can simulate and analyse anyimpact. High impact covers with approx. 500 kJ has been delivered and CSUB has designed coverswith impact requirement up to 800 kJ.

All GRP structures are designed according to NORSOK requirement and DnVGL-ST-C501Composite Components.

The low weight of the GRP Protection Covers has benefits for cost, required size of installationvessel and impact to soft soil areas.

The GRP Protection Structures can either be stabilised by rockdump, or by the use of ballast andskirt solutions designed by CSUB.




Reference

https://csub.com/products/protection-cover/Contact


http://www.csub.com



http://www.csub.com

Djuvik Bend Restrictor

2019-12-19 - Djuvik

Category: Hardware Umbilicals & FlowlineSubcategory: Umbilicals & CablesType: Product

A bend restrictor is used to prevent flexible cables or pipelines to overbend. The bend restrictorsfrom Djuvik can be tailor-made to suit the needs and specifications of your project. The field-proven design is lightweight and makes for simple and fast installation.The Djuvik Bend Restrictor can be made in both buoyant and sinking material.

Conventional bend restrictors are often anchored in a way that results in further tension, as theload will act on a limited surface. Due to the innovative spherical shape of Djuvik’s bend restrictor,this load will be distributed over the sphere and will not cause further damage or deformation thusexpanding its span of life.




Reference

Djuvik Bend restrictorContact

Ørjan VikedalSales & [email protected]+47 922 53 162www.djuvik.no

http://www.djuvik.no

http://norwegiansuppliers.no/company/djuvik-201

https://djuvik.no/portfolio-view/bend-restrictor/



Djuvik Lightweight Debris Cap

2019-12-20 - Djuvik


The Djuvik Lightweight Debris Cap is used to protect the subsea wellhead or "Christmas tree" H4connector.

The Djuvik LWDC functions as both a cap to prevent debris entering the wellhead and XMT and asa preservation cap to prevent degradation/corrosion of the connector. If the Lightweight DebrisCap is installed on a new type XMT (with TH and 2 plugs and no Internal Tree Cap), the DjuvikLWDC has a secondary function of locking down the TH during the production of the well.

The Djuvik LWDC is constructed using PA6 Nylon. The main advantage of this is that it will expandthe lifespan of both the Debris Cap and the connector. Due to the difference in materials, theLWDC will never damage the connector. Likewise, the Djuvik Lightweight Debris Cap will never beaffected by corrosion.




Reference

Djuvik Lightweight Debris CapContact

Ørjan VikedalSales & [email protected]+47 922 53 162www.djuvik.no


http://norwegiansuppliers.no/company/djuvik-201

https://djuvik.no/portfolio-view/lightweight-debris-cap/



Verification, Advisory, Certification, Inspection

2019-10-30 - DNV GL


Verification and CertificationSHE Risk ManagementTechnology QualificationAsset Risk ManagementEnterprise Risk ManagementSubsea services: Qualification of new technology, performance assurance, verification, qualitysurveillance, certification of material and components, integrity management, lifetimeextensions and requalification, fatigue failure and laboratory testing, risk assessment and riskmanagement, flow assurance and sand management.




Reference

DNV GL Oil & Gas ServicesContact

Jan Egil SæbergVice President [email protected]+47 958 04 997www.dnvgl.com

http://www.dnvgl.com

http://norwegiansuppliers.no/company/dnv-gl-113

https://www.dnvgl.com/oilgas/index.html


http://www.dnvgl.com

Always clean cooler system

2019-12-12 - Empig AS

Category: Subsea Systems (Hardware)Subcategory: Subsea ProcessingType: Product

The Always Clean Cooler System (ACS) is a subsea cooler that mitigates any formation of wax andhydrates. As wax and hydrates are the main challenges in flow assurance, the ACS can eliminatethe need to use insulation (and or direct heating) and production chemicals.Today, transport of oil beyond around 50 km is technically and economically unfeasible. The ACSenables extended reach and can allow development of resources that today are too far away frominfrastructure and too marginal to justify a platform or FPSO.Also, for areas with no infrastructure, the produced fluids can be processed on land (like Snøhvitand Ormen Lange does for gas), instead of offshore facilities.The technology is often referred to as Cold Flow.



TRL 4: Technology qualified for first use Full-scaleprototype built and technology qualified through testing inintended environment, simulated or actual. The newhardware is now ready for first use

Reference

Empig HomepageContact

Lars Strø[email protected]+47 92269708www.empig.no

http://www.empig.no

http://norwegiansuppliers.no/company/empig-as-358

http://www.empig.no


http://www.empig.no

SPO Compact flanges

2019-11-11 - Freudenberg Oil & Gas Technologies

Category: Subsea Systems (Hardware)Subcategory: Tooling/ConnectorsType: Service

Freudenberg Oil & Gas Technologies (FOGT) is a global solutions provider of innovative sealsolutions and differentiated seal products to the global oil and gas industry; Our line of clampconnectors, Vector type SPO compact flanges and dynamic ball joints are found on offshore oil &gas platforms, FPSO's; riser and swivel applications, flowlines and subsea installations; andchemical and petrochemical plants. Featured products are the SPO Compact Flange, the TECHLOKClamp Connector, the ROV-operated Optima Subsea Connector etc..




Contact

Jean-Noël LundhBusiness [email protected]+47 468 99 321www.fogt.com

http://www.fogt.com

http://norwegiansuppliers.no/company/freudenberg-oil-gas-technologies-87


http://www.fogt.com

Searise

2019-12-10 - FSubsea


Subsea pumping system that can be used for seabed trenching and similar services.

Standard range (alternatives can be engineered):

- Power: 500kW / 3 - 4.1kV- Flowrate: 0-600 m3/hr- Pressure rating (Casing dP / Max Internal operating pressure): 150 bar- Water depth: 0-3000m




Contact

Alexander [email protected]+47 9154 20 00www.fsubsea.com

http://www.fsubsea.com

http://norwegiansuppliers.no/company/fsubsea-168



Omnirise Single-phase Booster

2020-01-27 - FSubsea


Subsea pumping system that is entirelly "Topside-Less" and can be can be used for Subsea watertreatment (??), Water Injection and boosting of other liquids (??) (less than 10% Gas VolumeFraction).

The unit has integrated "Hydromag" technology, which means there is no mechanical seal orbarrier-fluid system. The variable speed function is built-in to the Pump Unit itself. Thissignificantly lowers system cost, topside impact and also increases reliability, while minimizingenvironmental impact.

Standard range (alternatives can be engineered):

- Power: 1500kW / 6.6kV- Flowrate: 0-600 m3/hr- Pressure rating (Casing dP / Max Internal operating pressure): 345 bar- Water depth: 0-3000m

TRL-4 in 2020



TRL 3: New technology tested Prototype built andfunctionality demonstrated through testing over a limitedrange of operating conditions. These tests can be done ona scaled version if scalable

Contact

Alexander [email protected]+47 9154 20 00www.fsubsea.com


http://norwegiansuppliers.no/company/fsubsea-168



Hydraulic Power Unit

2019-10-18 - Hitec Products AS


Hydraulic Power to Topside, Subsea and Drilling applications.The main application areas are:

Subsea Production HPUTopside Wellhead HPUBallast HPUTopside HPU for Hydraulic actuated valvesDrilling HPUTest and Flushing HPUThe HPU provides a stable and clean supply of hydraulic fluid to topside or remotely operatedsubsea valves or tools. There is high focus on system design and assembly with regards to HSE,Man-Machine-Interface (Controls), reliability and cleanliness.

The majority of our systems are developed in accordance with client specifications, we can alsooffer standard HPUs.




Reference

Hydraulic Power UnitContact

David SouthSales & Marketing [email protected]+47 917 11 202www.hitecproducts.no

http://www.hitecproducts.no

http://norwegiansuppliers.no/company/hitec-products-as-226

https://hitecproducts.no/hpproduct/hydraulic-power-unit/



Workover Control System



We can offer smaller Direct Hydraulic systems to advanced Multiplex IWOCS systems. Oursystems are developed systems for both tropical and arctic environments. We have a wellestablished MODULAR design which allows our clients full flexibility in terms of functionality andprovides key advantages in terms of project reliability, safety & high quality.

designed in accordance with NORSOK S-002 with focus on the operators environment.We offer:Modular IWOCSDH Workover Systems – DH WOCSInstallation Workover Control Systems – IWOCSWorkover Hydraulic Power Unit – WOCS / HPUMaster Control PanelMultiplex SystemsRemote Control PanelsEmergency Shutdown PanelsRig Interface EquipmentDeck JumpersSurface Flow Tree PanelsUmbilical Reel with Workover Umbilical




Reference

Workover Control SystemContact

David SouthSales & Marketing [email protected]



https://hitecproducts.no/hpproduct/workover-and-installation-control-system/


+47 917 11 202www.hitecproducts.no


Chemical Injection Systems



We have a close cooperation with the main component suppliers and will custom design systemsaccording to your specifications.Our deliveries include:

Pump skidsTank skidsChemical Injection Unit – CIUMultipurpose Chemical Injection SystemsMEG / Methanol Injection SkidsChemical Dosing Panels




Reference

Chemical Injection UnitContact

David SouthSales & Marketing [email protected]+47 917 11 202www.hitecproducts.no



https://hitecproducts.no/hpproduct/chemical-injection-systems/



Patch Repair Clamp

2019-11-05 - IK-Group

Category: Engineering & ServicesSubcategory: Subsea EngineeringType: Product

ROV Operated Patch Clamp, to be clamped outside the pipe and comprises an elastomeric sealthat is engaged by pressure.




Reference

IK SubseaContact

Kenneth LåtveitBusiness Development andSales [email protected]

http://www.ik-worldwide.com

http://norwegiansuppliers.no/company/ik-group-316

https://ik-worldwide.com/http:/ik-worldwide.com/product/ik-trademarks/patch-repair-clamp/



Combined Structural and Sealing Clamp

2019-11-05 - IK-Group

Category: Engineering & ServicesSubcategory: Subsea EngineeringType: Product

Combined structural and sealing clamp with circumferential packers to mechanically secure theflange couple in combination with external injection of a pressure activated sealant




Reference

Combined Structural and Sealing ClampContact

Kenneth LåtveitBusiness Development andSales [email protected]


http://norwegiansuppliers.no/company/ik-group-316

https://ik-worldwide.com/http:/ik-worldwide.com/product/products-and-services/subsea/template/leakage-seal-clamps-for-rov-installation/combined-structural-and-sealing-clamp/



Engineering services

2020-02-14 - IKM Ocean Design


With more than 35 years experience, IKM Ocean Design is a global provider of independentengineering services within development and design of offshore and subsea developments fromfeasibility, through conceptual, FEED and detail design, to follow-on engineering andconstruction/offshore support. Our expertise is pipeline design, including advanced analyses andgeotechnical support.

Through innovative and state of the art methods and tools, we provide unique solutions,challenging proven technology to improve and develop value adding solutions, e.g. optimization ofpipeline protection and optimization of free span rectification requirements has saved our clientshundreds of MNOK. Our 75 employees are innovative and experienced engineers, many with along track record in the industry.




Reference

IKM Ocean Design websiteContact

Espen GilbuSales and [email protected]+47 990 06 553www.ikm.com/ikm-ocean-design/

http://www.ikm.com/ikm-ocean-design/

http://norwegiansuppliers.no/company/ikm-ocean-design-293

https://www.ikm.com/ikm-ocean-design/




Engineering services

2020-02-14 - IKM Ocean Design


With more than 35 years experience, IKM Ocean Design is a global provider of independentengineering services within development and design of offshore and subsea developments fromfeasibility, through conceptual, FEED and detail design, to follow-on engineering andconstruction/offshore support. Our services include engineering design, construction and deliveryof subsea system, also for ultradeep waters.

We have extensive experience with field development and system engineering that includesrisers, flexibles, umbilicals and power cables, rigid pipelines, spools, manifolds and templates. Wetake an active role as SURF integration contractor in projects to ensure a complete and holisticview on all details.




Reference

IKM Ocean Design websiteContact

Espen GilbuSales and [email protected]+47 990 06 553www.ikm.com/ikm-ocean-design/


http://norwegiansuppliers.no/company/ikm-ocean-design-293

https://www.ikm.com/ikm-ocean-design/




ROV

2019-12-10 - IKM Subsea

Category: Marine Operations, Intervention & Subsea ServicesSubcategory: Seabed Survey, Light Intervention & IMRType: Product

IKM Subsea was the first operator to demonstrate a successful track record in development anduse of electric WROVs. This in-house knowledge has been fundamental in placing IKM at theforefront of the Resident ROV solution providing 24/7 – 365 ROV operations utilizing the IKMonshore control center. The features of the electrical WROV is of paramount importance and theheart of the reliability when it comes to our ability to stay submerged for long operational periods.

• In-house technology• Electric trusters• Immediate readiness• No daily launch/recovery• No waiting on weather• Full redundancy• No overheating• Green design• 13 weeks submerged• Subsea toolstand• Remote operations, since May 2017• Task specific simulation, in-house simulator / training center




Contact

Hans FjellangerBusiness [email protected]

http://www.ikm.no/ikm-subsea

http://norwegiansuppliers.no/company/ikm-subsea-260


+47 920 35 120www.ikm.no/ikm-subsea

http://www.ikm.no/ikm-subsea

Testing and Mainteneance

2020-05-06 - IKM Testing

Category: Hardware Umbilicals & FlowlineSubcategory: Umbilicals & CablesType: Service

Umbilical services; hydraulic, electrical and fibre optic testing




Reference

https://www.ikm.com/ikm-testing-uk/products/Contact

Trond SægrovSales [email protected]+47 90 57 55 56www.ikm.com/ikmtesting

http://www.ikm.com/ikmtesting

http://norwegiansuppliers.no/company/ikm-testing-44

https://www.ikm.com/ikm-testing-uk/products/


http://www.ikm.com/ikmtesting

Pre-commissioning and Commissioning

2019-10-30 - IKM Testing AS

Category: Engineering & ServicesSubcategory: OtherType: Service

IKM Testing AS is a multi-discipline supplier of Integrated Mechanical Completion-, Pre-commissioning- and Commissioning Services on pipeline and process system to oil and gasinstallations. With 12 strategical international offices and a fleet of modern and efficientequipment, the company is performing testing-, cleaning-, inspection- and pipeline services on aglobal scale.IKM Testing’s well-trained and multi-skilled workforce is an advantage, having the competence,experience and knowledge to perform simple and complex services and with flexibility andmobility to changing their roles according to needs. This translates directly into increasedefficiency, better quality, with less interfaces and reduced cost.




Reference

Mechanical Completion-, Pre-commissioning- andCommissioning Services

Contact

Jens BolmeInternational Sales &Marketing [email protected]+47 909 54 221www.ikm.no

http://www.ikm.no

http://norwegiansuppliers.no/company/ikm-testing-as-335

http://www.IKM.no

http://www.IKM.no


http://www.ikm.no

Shipping and maritime services

2020-03-04 - Leth Agencies

Category: Marine Operations, Intervention & Subsea ServicesSubcategory: OtherType: Service

Since our inception in the Suez Canal zone in 1924, we have focused on providing innovative andquality services for the users of the Suez Canal.We are a leading shipping agency that offer ourclients a diverse and comprehensive service portfolio. These are delivered by our competent stafflocated in Egypt, Norway, Denmark, and Singapore. We have strategic partnerships in Turkey,Panama and Gibraltar, as well as local services in the Danish Straits and Singapore.

Our services include:– Transit management– Owners’ and husbandry matters– Crew change– Cargo and bunkering operations– In/ out- port freshwater supply, pilotage, towage– Ship’s spares handling– Provisions and general ship stores supply– All port- related matters and services– Drydocking operations– CTM Delivery




Reference

Leth AgenciesLeth Incargo

Contact

Per Fredrik [email protected]+47 23 11 55 00https://lethagencies.com/

https://lethagencies.com/

http://norwegiansuppliers.no/company/leth-agencies-369


https://lethincargo.com/



Advanced structural analyses

2020-05-20 - Multiconsult


Subsea structures and foundations:- Foundation engineering and structural design- Soil-structure interaction- Non-linear buckling analyses




Reference

Subsea deep-water foundations and structuresContact

Christopher LøkenSales [email protected]+47 21 58 54 82www.multiconsult.no

http://www.multiconsult.no

http://norwegiansuppliers.no/company/multiconsult-80

https://www.multiconsultgroup.com/objects/subsea-deep-water-foundations-and-structures/?parent=7860




Interdisciplinary expertise



Subsea structures – interdisciplinary expertise:- Geotechnical engineering- Structural engineering- Marine engineering- Hydrodynamic analyses- Soil-structure Interaction-- Buckling capacity of caisson foundations-- State-of-the-art FE-modelling-- Well expansion analyses




Reference

Special ServicesContact




https://www.multiconsultgroup.com/services/special-services/?parent=7860




Geotechnical engineering – Design, verification andadvisory services



Geotechnical engineering:- Subsea structures- Anchors and mooring systems- Suction buckets- Monopile foundations- Offshore soil investigations – spec and data interpretation- Installation support




Reference

Marine Foundation EngineeringContact




https://www.multiconsultgroup.com/services/marine-geotechnics-2/?parent=7860




Induction Pipe Bending

2019-10-28 - NIRAS AS - Induction Bending

Category: Hardware Umbilicals & FlowlineSubcategory: Risers, Flowlines & Tie-insType: Product

Product/serviceInduction Pipe BendingBending all kinds of steel qualities Stainless steel qualities. Duplex, super duplex, 6Mo, Superaustenite, Inconel, TP 312/TP 316, high-alloyed carbon qualities such as AISI4130, 13Cr, F6NM,F22, and carbon qualities such as API 5L X52-X65/SML 360-450, clad pipe, titanium, aluminium,copper and brass.

Capability conditionsOuter diameter from 1/2" to 20".Wall Thickness from 1,2 mm to 100 mm.Bending radius from 65 mm to 22.000 mm

Value propositionThe process allows for great reduction of welds and increased design flexibility,50 % cost saving on pipe spools and 25 % reduction of erosion rates.




Reference

Induction bendingContact

Øyvind StorhaugBusiness [email protected]

http://www.niras.no

http://norwegiansuppliers.no/company/niras-as-induction-bending-256

http://www.niras.no


+47 900 85 682www.niras.no

http://www.niras.no

Subsea Valves

2019-12-17 - Norvalves

Category: Subsea Systems (Hardware)Subcategory: Subsea FacilitiesType: Product

Norvalves design and manufacture a wide range of valves and connectors for the challengingsubsea industry.

Our knowledge in the oil and gas industry combined with highly experienced engineering andmodern production facilities make us the flexible valve supplier to fulfill the requirements forsubsea installations.

We deliver compact ball, check, connectors and rotary gate valves. We design and qualify ourvalves based on the project's needs and specifications such as ISO 13628-4




Reference

Subsea ValvesContact

Odd Inge TveitSales Manager [email protected]+47 906 77 817www.norvalves.no

http://www.norvalves.no

http://norwegiansuppliers.no/company/norvalves-153

https://www.norvalves.no/products/subsea/


http://www.norvalves.no

Seabox™ subsea water treatment module

2019-10-18 - NOV


Seabox™ subsea water treatment system is an excellent tool optimizing water injection into thereservoir. It provides the flexibility to achieve improved reservoir sweep and the required pressuresupport, for increased oil recovery. Installed subsea, decoupled from topside facility, it disinfectsraw seawater and settles out particles. The Seabox has a standard treatment capacity of 40,000bwpd.

The Seabox can operate in water depths down to 3,000 meters, feeding treated water either to asubsea injection pump and/or as part of a SWIT™ technology configuration or to topside injectionpump and/or processing equipment. Ensuring full flexibility for waterflooding, providing anincreased recovery potential. It reduces energy and chemical consumption, and retrofit costs.



TRL 6: Technology installed Full-scale prototype built andintegrated into intended operating system with fullinterface and functionality test program in intendedenvironment. The technology has shown acceptableperformance and reliability over a period of time

Reference

Seabox subsea water treatment technologyContact

Torbjørn HegdalBusiness [email protected]+47 975 33 885www.nov.com

http://www.nov.com

http://norwegiansuppliers.no/company/nov-185

https://www.nov.com/products/seabox-subsea-water-treatment-technology


http://www.nov.com

SWIT™ subsea water treatment technology

2019-10-18 - NOV


The SWIT™ subsea water treatment technology, includes the Seabox™, ultrafiltration andmembrane technology to tailor raw seawater to reservoir requirements – particle-free, low salinityor low sulfate water. Giving the industry subsea alternatives for effective increased and enhancedoil recovery.

The SWIT™ technology provides superior quality of injection water, removing sulfate and reducingsalinity, enabling enhanced oil recovery. The system reduces the need for maintenance, withoutcompromising performance. The Seabox™ module is the main differentiating part of thetechnology, securing long term maintenance free operation of membranes, enabling unmannedoperations, reduced power requirements and carbon footprint.



TRL 4: Technology qualified for first use Full-scaleprototype built and technology qualified through testing inintended environment, simulated or actual. The newhardware is now ready for first use

Reference

SWIT™ subsea water treatment technologyContact

Torbjørn HegdalBusiness [email protected]+47 975 33 885www.nov.com

http://www.nov.com

http://norwegiansuppliers.no/company/nov-185

https://www.nov.com/products/seabox-subsea-water-treatment-technology


http://www.nov.com

Subsea Structures

2019-12-11 - Nymo AS

Category: Subsea Systems (Hardware)Subcategory: Subsea FacilitiesType: Service

Detail engineering is available for structural and piping disciplines. Special subsea platform withdepth of 10 m is available for submerged testing. Overhead lifting capacity of 200 MT.

Our staff is well experienced in detail design, fabrication and testing of complete units for seabedinstallation of wellhead satellites, process units and associated piping. The fabrication skillsinclude all relevant material qualities used in subsea equipment.

Units delivered:

Manifolds for multi well field developmentsSatellite production wellhead framesInjection wellhead framesSeabed separation and compression unitsPrefabricated seabed pipe branch connectionsPlatform tie-in pipelinesRisers




Reference

SubseaContact

Magne SnekkevikSales and Marked [email protected]+4791562585https://www.nymo.no/home

https://www.nymo.no/home

http://norwegiansuppliers.no/company/nymo-as-342

https://www.nymo.no/business-areas/subsea-structures


https://www.nymo.no/home

Subsea Engineering

2019-10-30 - Ocean Installer


Ocean Installer is a Norwegian subsea contractor with a global horizon that delivers full EPCI(Engineering, Procurement, Construction and Installation) services within the area of marine andsubsea operations.

Ocean Installer can supply Engineering services for all SURF related developments. Ocean Installerhas executed several projects to date for Engineering and installation of subsea facilities.




Contact

Kevin [email protected]+47 51 95 70 25www.oceaninstaller.com

http://www.oceaninstaller.com

http://norwegiansuppliers.no/company/ocean-installer-78



SURF Engineering




Ocean Installer can supply Engineering services for all SURF related developments. Ocean Installerhas executed several projects to date for Engineering and installation of subsea facilities.




Contact






Seabed Survey, Light Intervention & IMR


Category: Marine Operations, Intervention & Subsea ServicesSubcategory: Seabed Survey, Light Intervention & IMRType: Service


Ocean Installer can design, procure and install subsea equipment within the specification ofcustomers and use of subcontractors. Ocean Installer has executed several projects to date forinstallation of subsea facilities.




Contact






Seabed Installation


Category: Marine Operations, Intervention & Subsea ServicesSubcategory: Seabed InstallationType: Service


Ocean Installer can design, procure and install subsea equipment within the specification ofcustomers and use of subcontractors. Ocean Installer has executed several projects to date forinstallation of subsea facilities. This also includes seabed rectification such as Rock Installation,dredging & Trenching.




Contact






Pipelaying, Pipeline Repair


Category: Marine Operations, Intervention & Subsea ServicesSubcategory: Pipelaying, Pipeline RepairType: Service


Ocean Installer can design, procure and install subsea equipment within the specification ofcustomers and use of subcontractors. Ocean Installer specialises in the SURF (Subsea, Umbilical,Risers and Flowline) market with Flexible pipe lay capability. Ocean Installer has executed severalprojects to date for installation of subsea facilities.




Contact






Subsea protection products

2019-10-23 - PartnerPlast


PartnerPlast provides a selection of subsea protection products, ranging from cable protection andsubsea mats, to bend restrictors and pipe clamps. A wide range of products is kept in stock, whichensures immediate dispatch and short delivery time.

PartnerPlast supplies a wide range of buoyancy and subsea plastics for various applications. Wesupply products for all water-depths, ranging from surface to a depth of 6,000 meters.

We produce everything from small spherical buoys with a few kilos’ buoyancy, to modular systemswith a buoyancy of several tens of tonnes. We also offer buoyancy based on customers’ designand requirements.




Reference

PartnerPlast websitePartnerPlast offshore and subsea productsPartnerPlast offshore and subsea catalogue

Contact

Randi [email protected]+47 415 33 434www.partnerplast.com

http://www.partnerplast.com

http://norwegiansuppliers.no/company/partnerplast-111

http://partnerplast.com/

http://partnerplast.com/information-on-offshore-subsea/

http://partnerplast.com/go/oss-catalogue-download/


http://www.partnerplast.com

Reels, turntables & carousels

2020-01-27 - PASSER


Reels, turntables & carousels for transport, storage, installation and production of subsea-powercable, umbilicals, flexibles and mooring ropes




Contact

Peder E. FarmenSales & Marketing [email protected]+4790171903https://www.passer.no/

https://www.passer.no/

http://norwegiansuppliers.no/company/passer-353


https://www.passer.no/

Polyform Sub FlowSafe

2020-01-13 - Polyform AS


Hose flotation device.

The POLYFORM® Sub Flowsafe is made from a rotomolded PE outer shell and filled withpolyurethane (PUR) foam, guaranteeing a compressive strength of 500 mH2O. The Sub Flowsafeseries are equipped with stainless steel hinge and clamp. All steel parts are placed within theouter diameter of the complete float. A synthetic rubber gasket locks the Sub Flowsafe in position.Fitted onto a hose with a distance of 25mm, the internal profile of the Sub Flowsafe still allowswinding the hose with clamps mounted to a drum with diameter of 1,8m.




Reference

Polyform Sub FlowSafeContact

Espen Aasen MolværSales [email protected]+ 4790123465 / + 4770172570www.polyform.no

http://www.polyform.no

http://norwegiansuppliers.no/company/polyform-as-364

https://polyform.no/subsea/sub-flowsafe/



Polyform SMB-series



Sub Modular Buoyancy System.

The POLYFORM® SMB-series modular buoyancy is made from a rotomolded PE outer shell andfilled with polyurethane (PUR) foam, with compressive strength for a variety of depth ratings. Thecontinuous high quality chain is terminated at either end of the buoy by use of hot dip galvanizedsteel terminating discs that are designed to prevent damage to the buoy. The chain is easilyattached by shackle to the anchor line. All wear parts are standard components and can easily bereplaced.




Reference

Polyform SMB-seriesContact




https://polyform.no/subsea/smb-series/



Polyform A-series



All purpose buoys

The A-series are useful in a wide variety of maritime sectors. Typically as marker buoys andfendering at surface level, orfoam-filled as hose/cable-floatation on all depths for subsea applications.We use a rigid/hard type of PUR foam that can be formulated and supplied in a variety of differentdensities, suitable for depths down to - 1000m.




Reference

Polyform subsea productsContact




https://polyform.no/subsea/



Subsea Production Systems

2019-12-18 - REINERTSEN New Energy


Product-independent, engineering companyFocus on delivering sustainable solutions and field development concepts with a low carbon foot-print.Efficient, low-carbon tie-back concepts:- Subsea layout options (templates vs satellites, drill-ability, flowline configuration, tie-in methods,control systems,…)- Production Systems (SPS)- Modularization- Subsea processing and boosting vs. topside modifications- HIPPS requirement / system design vs upgrade of flowline WT- Selection and design of cost-efficient heating system (DEH, EHT, and insulation)- Optimal material selection and re-use of equipment- Umbilical design- Integrity management- Pigging philosophy- Estimation of CO2-footprint and cost




Contact

Geir [email protected]+47 926 09 130www.rein-energy.com

http://www.rein-energy.com

http://norwegiansuppliers.no/company/reinertsen-new-energy-192



Subsea / SURF Engineering

2019-12-18 - REINERTSEN New Energy


REINERTSEN New Energy supply Subsea / SURF services that include all areas from reservoir, wellsystems, subsea production systems, subsea infrastructure to the processing plant.REINERTSEN New Energy is a product independent supplier of services to the oil companies in thefollowing areas:- Subsea architecture and layout- System design- Flow Assurance incl. Reservoir & well (through cooperation with PRORES AS)- Selection of optimum flowline and riser dia- Engineering of pipelines, risers and subsea structures/components- Seabed intervention – risk based design- Materials and corrosion design- "Owners Engineering"




Contact

Geir [email protected]+47 926 09 130www.rein-energy.com


http://norwegiansuppliers.no/company/reinertsen-new-energy-192



Seabed Levelling

2020-01-16 - Scanmudring

Category: Marine Operations, Intervention & Subsea ServicesSubcategory: Seabed Survey, Light Intervention & IMRType: Service

Scanmachines has been used on several occations for levelling of seabed. The company has animpressive track record for levelling of seabed from shallow to ultra-deep waters. With aScanmachine levelling operations can be on semi-automatical, securing an even seabed.Tolerances of +- 2 cm has been done in the past for GBS installation




Reference

GBS installationContact

Merethe Thunberg-ChristensenSales & [email protected]+47 970 94 135www.scanmudring.no

http://www.scanmudring.no

http://norwegiansuppliers.no/company/scanmudring-146



ROV and Standalone Dredges



The Standalone dredge's ejector system is identical to the successful system used on theScanmachine, which is pre-rigged on a certified lifting frame. The Standalone dredge solutionoffers real versatility, making it suitable for operations fewer limited requirements in terms ofdredging tolerances

The ROV Dredge system is an advanced add-on dredging kit that can be used on most commonWork Class ROVs. The system is assembled, operated, maintained offshore and dismounted by thecustomer’s ROV-team.The ejector is powered with water pumps connected to WROV’s hydraulic power outlet. Use ofScanarm eliminates damage to the ROV’s standard manipulator and improves operationalefficiency.




Reference

ROV- and Standalone dredgesContact




http://www.scanmudring.no/page/23/Dredging_equipment



Underwater drilling system



Scanmudring was challenged by Equinor to come up with new or improved solutions related tooptimization of future pipeline routes. Planning the Johan Sverdrup installation project, theoperator identified subsea rock outcrops which restricted the pull-in of the 36” oil export line fromthe Johan Sverdrup field to Mongstad through a 48” borehole. For Scanmudring this includedfinding a cost-effective solution for mechanical rock removal/rock splitting of massive rock ongreat water depths, in a 90-degree hill inclination close to existing live pipelines.




Reference

Underwater drilling systemhttp://

Contact




http://www.scanmudring.no/page/60/Underwater_Drilling_system



Grabs



Scanmudring has several grab solutions available for boulder removal or other objects, as well asre-location of large volumes of soil.




Reference

GrabsContact




http://www.scanmudring.no/page/59/Underwater_Grabs



Cutting services



Scanmudring has strengthened the organization with several key persons within specificsegments and offers expertise and a wide array of services within subsea cutting and cleaning.

ABRASIVE CUTTING: Internal and external cutting manipulators, suspension systems, cutverification system and decades of experience for our on-and offshore personnel

Diamond wire cutting: From the smalles sizes and up to 100" available

Cleaning equipment: For marine growth removal, concrete removal, grout removal and/or otherapplications up to cleaniness SA 2,5.

Tooling design:Capacity to design and build a range of subsea tooling;Cutting toolsCleaning toolsMechanical toolsClampsCore drillsProven track record from ca. 100 different tooling designs




Reference

Cutting servicesContact

Merethe Thunberg-



http://www.scanmudring.no/page/81/Cutting_services

ChristensenSales & [email protected]+47 970 94 135www.scanmudring.no



Drill cut removal



Where there is drill-cut there is often debris present, which needs to be re-located during thedredging operation (thus affecting the dredging performance).There are several types of drill-cut which means it can be difficult to predict the consistencySome drill-cut is sticky, which means that objects/debris may be hard to removeSubsea cleaning of the machine to reduce deck handling should be consideredDrill-cut is easy to transport over distances– it spreads easily behind the machineUsually drill-cut is an acceptable surface to relocate the machine by using tracks, but could be achallenge if consistency is stickyDependent on current, visibility can be a problem when dredging this material




Reference

Drill cut removalContact




http://www.scanmudring.no/page/14/Soil_removal_seabed_preparation



Debris removal



It's important to prepare and consider the amount of debris during project planning as this willaffect the dredging capacityThe Scanmachine can lift “larger” debris by using a gripper mounted on the suction nozzle, whilethe ROV working in collaboration, can relocate the debris to a safe deposit area for later handlingif requiredClogging of the suction hose can be avoided by utilizing a backflush unit mounted on the ejector,reversing the water flow and blowing out the obstacle clogging the hoseStrainer on the suction nozzle inlet can be mounted to avoided big obstacles to enter the suctionhose




Reference

Debris removalContact




http://www.scanmudring.no/page/15/Object_removal



Boulder Removal



Boulders can be picked up and dropped using the Scanmachine dipper, or using the Grab forlarger boulders




Reference

Boulder RemovalContact




http://www.scanmudring.no/page/15/Object_removal



Subsea cleaning services



Cleaning of:CaissonsPipelines (weight coat)StructuresConductorsHullsROV-integrated toolsStandalone toolsCleaning/inspection integrated in one tool (single deployment)




Reference

Cleaning ToolsContact




http://www.scanmudring.no/page/81/Cutting_services



Integrated services



With over 30 years in the field and an impressive track record, Scanmudring has successfullydelivered projects to many markets. Scanmudring’s new and existing services can be bundledtogether, delivering:

Integrated operation - efficiency gains in providing both soil and seabed preparation, and cuttingand cleaningCrewing optimization – lower no of crew onboard as Scanmudring offshore personnel operate allspreads.Reduced contract and personnel management for all activitiesSimplified mobilization and demobilizationsCutting services

With an extensive equipment and services portfolio, as well as industry-leading personnel,Scanmudring can serve as your integrated supplier for subsea projects.




Reference

Integrated servicesContact




http://www.scanmudring.no/page/85/Integrated_services



UltraMonit® corrosion/erosion monitoring

2019-12-05 - Sensorlink AS


UltraMonit® corrosion/erosion monitoring systems for subsea pipelines and spools is a tool forwall thickness monitoring of pipes and spools in pressure systems. The systems are beased onwell known ultrasonic technology and is deployed in several projects around the world.

There are several applications for UltraMonit® systems:UltraMonit® InSitu for greenfield applicationsUltraMonit® Retrofit for brownfield applicationsUltraMonit® Erosion for erosion monitoring in XT's and manifolds

The UltraMonit® systems will enhance the safety of your operations and will give valuable input toyour operations.




Contact

Jan Tore ErvikChief Marketing [email protected]+47 900 69 640www.sensorlink.no

http://www.sensorlink.no

http://norwegiansuppliers.no/company/sensorlink-as-343


http://www.sensorlink.no

Pipeline coatings and insulation

2020-02-13 - Shawcor Norway

Category: Hardware Umbilicals & FlowlineSubcategory: Risers, Flowlines & Tie-insType: Product

Shawcor offers the widest range of pipe coating solutions in the industry, providing customerswith anti-corrosion protection, thermal insulation, buoyancy control, mechanical protection andinternal flow efficiency.

Shawcor has developed its industry leading Ultra Wet Insulation system, an innovative subseathermal insulation system with unlimited water depth capability. The Thermotite® ULTRA™coating solution also allows the operator to reduce the thickness of the pipe coating compared toother competing coating solutions, while keeping the same thermal insulation performance.




http://www.shawcor.com

http://norwegiansuppliers.no/company/shawcor-norway-202

Reference

Shawcor websiteShawcor delivers ULTRA coating to GoliatArctic Materials Research ProjectThermotite PPFoam CapabilitiesThermotite Ultra CapabilitiesFlow Assurance SolutionsPlant Capabilities

Contact

Snorre LillesandBusiness [email protected]+47 959 44 004www.shawcor.com

https://www.shawcor.com/

http://www.energy-oil-gas.com/2012/02/02/bredero-shaw-norway/

https://www.sintef.no/globalassets/project/arctic-materials/pdf/st10-sintef-akselsen_p11530-pro.pdf

https://www.shawcor.com/pipe-coating-solutions/products/thermotite-(polypropylene-foam)

https://www.shawcor.com/pipe-coating-solutions/products/thermotite-ultra

https://www.shawcor.com/pipe-coating-solutions/integrated-solutions/pipe-coating/flow-assurance

https://www.shawcor.com/pipe-coating-solutions/expertise/plant-capabilities


http://www.shawcor.com

Subsea Connectors

2020-01-29 - Siemens Subsea

Category: Subsea Systems (Hardware)Subcategory: Subsea Power/Supply/DistributionType: Product

The reliable Tronic line of DigiTRON, SpecTRON, DigiTRONf, and ElecTRON products provideelectrical and fiber-optic connector systems for subsea power and communications




Reference

Siemens SubseaContact

Kim SmithMarketing [email protected]+44 7921 243998siemens.com/subsea

http://siemens.com/subsea

http://norwegiansuppliers.no/company/siemens-subsea-352




Siemens Matre Sensors



Siemens Matre sensors and transmitters have been delivering excellent performance with a highlevel of dependability for over 25 years. In addition to our renowned well-head pressure /temperature sensors, we also offer a wide assortment of proven and tested instruments formonitoring the conditions of subsea operations.




Reference

Siemens Matre SensorsContact







Siemens PowerGRID



Subsea Power Grid - Powering Installations on the SeabedEnabling large-scale subsea processing by powering the subsea fields of the future – down to3,000 meters.




Reference

http://siemens.com/subseaContact







LIfecycle Management



Maintaining our subsea commitments - Subsea oil and gas recovery comes with many challenges.In order to adequately meet steadily growing customer demands, to optimize operationalefficiency, extend field life and increase output, Siemens fully maintains its commitments with avariety of service support offers – at every phase of development.




Reference

http://siemens.com/subseaContact







SeAlign misalignment connector.

2020-01-09 - SubseaDesign AS

Category: Subsea Systems (Hardware)Subcategory: Tooling/ConnectorsType: Product

SeAlign misalignment connector:

Traditional subsea connections for rigid pipe spools require large bending moments for alignmentduring tie-in and connection, introducing high stresses in the piping. These stresses reduce theavailable capacity for operational loads from pressure and thermal expansion.

SeAlign connection system, available both for make-up by divers and by ROV, allowing up to 3degrees permanent misalignment, eliminates the tie-in bending moment. Using the SeAlignconnection system opens for design of shorter tie-in spools. Significant savings on vessel time,vessel size and hardware cost can be realized. The benefit may also be realized as relaxedfabrication tolerances and simplified designs, e.g. for compact pigging loops and flow controlmodules.




Reference

http://Contact

Svend SkjeggedalSales [email protected]+47 91343424http://subseadesign.com

http://subseadesign.com

http://norwegiansuppliers.no/company/subseadesign-as-340



Subsea Engineering

2020-01-09 - SubseaDesign AS


SubseaDesign carry out general subsea engineering and equipment design, either as engineeringonly or as EPC. We are recognized among our clients as a flexible problem solver delivering highquality products on-time to budget. Typical examples are:• Collet connectors• Hydraulic couplers• PLR’s• Templates• Manifolds




Reference

Subseadesign web-siteContact

Svend SkjeggedalSales [email protected]+47 91343424http://subseadesign.com


http://norwegiansuppliers.no/company/subseadesign-as-340




Subsea Systems

2019-12-13 - TechnipFMC

Category: Engineering & ServicesSubcategory: Subsea EngineeringType: Other

Since the 1970’s, our engineers have been at the forefront of technology development, shapingthe global subsea industry, taking it deeper and farther. Today, we’re making it more economical.By designing integrated subsea systems with cost reduction in mind, we have streamlinedengineering, manufacturing, installation, life of field services and project execution for a bettersubsea future.




Reference

Subsea SystemsContact

Nicole DonnellyMarketing [email protected]+47 32 70 24 06www.technipfmc.com

http://www.technipfmc.com

http://norwegiansuppliers.no/company/technipfmc-47

https://www.technipfmc.com/en/what-we-do/subsea/subsea-systems




Subsea processing

2019-12-13 - TechnipFMC

Category: Engineering & ServicesSubcategory: Production ServicesType: Product

Subsea processing systems have been increasingly valued by operators to enhance fieldeconomics by maximizing recovery, increasing production and reducing costs. We are theforerunner in delivering subsea processing solutions having successfully installed systems in abroad range of brownfield and greenfield applications worldwide, which has enabled our clients toovercome the challenges of accessing difficult reserves.

Strong portfolioOur broad portfolio extends into separation, pumping and compression to deliver completesolutions to maximize production and lower costs per barrel. Our processing equipment performsin water depths up to 2,500 meters (8,200 feet), in temperatures to 350F and pressures to 15,000psi.




Reference

Subsea processingContact

Nicole DonnellyMarketing [email protected]+47 32 70 24 06www.technipfmc.com


http://norwegiansuppliers.no/company/technipfmc-47

https://www.technipfmc.com/en/what-we-do/subsea/subsea-systems/Subsea-processing




Compact Flanges and Clamp Connectors

2020-02-25 - TP Connectors AS (TPC)

Category: Subsea Systems (Hardware)Subcategory: Tooling/ConnectorsType: Product

TPC serve a wide range of customers including oil and gas producing companies, originalequipment manufacturers and engineering and service companies that provide technologies,equipment and services for producing oil and gas from land based subsea installations, floatingproducing vessels and all other offshore platforms throughout the world. The TPC products andsealing technology are used in some of the most demanding applications in oil and gas, includingriser and swivel applications, flowlines and subsea installations. The featured products are the TPCCompact Flange, the TPC clamp connector and ROV operated TPC Clamp Connector. Theengineering team consist of experienced engineers with capabilities of all kind of flange designand calculations.



TRL 2: Concept validated. Concept design or novelfeatures of design validated through model or small scaletesting in laboratory environment. Shall show that thetechnology can meet specified acceptance criteria withadditional testing

Reference

http://www.tpconnectors.comContact

John ArnesenSales [email protected]+47 41769074

http://norwegiansuppliers.no/company/tp-connectors-as-tpc-315

http://www.tpconnectors.com


Subsea Thermal Insulation

2020-01-30 - Trelleborg Offshore Norway

Category: Engineering & ServicesSubcategory: OtherType: Product

We provide corrosion protection, thermal insulation and mechanical protection for subseastructures such as manifolds, XMT's, jumpers, spools, risers, PLET and PLEM. We have the widestrange of products covering rubber, polypropylene, polyurethane, silicon and epoxy. Capable ofproviding products that can be used in temperatures from sub zero to operational temperatures of180°C and water depth exceeding 3000 meters. Our products and services can be applied atTrelleborg's factories in Norway, Brazil and Singapore as well as on customer's sites around theworld.




Reference

Njord Thermal InsulationContact

Hannah WelshMarketing [email protected]+47 47709813www.trelleborg.com

http://www.trelleborg.com

http://norwegiansuppliers.no/company/trelleborg-offshore-norway-81

https://www.trelleborg.com/en/offshore/products--and--applications/subsea--operations--protected--by--njord/njord--thermal--insulation


http://www.trelleborg.com

Wirescan Digital

2020-03-03 - Wirescan AS

Category: Marine Operations, Intervention & Subsea ServicesSubcategory: OtherType: Product

Wirescan is a provider of digitized cable/umbilical condition monitoring, to support cable ownersand operators to lower their cable installation and maintenance costs and move from “fail and fix”to “predict and prevent”.



TRL 5: Technology integration tested Full-scale prototypebuilt and integrated into intended operating system withfull interface and functionality tests

Contact

Vidar BergliVP [email protected]+4795939500www.wirescan.no

http://www.wirescan.no

http://norwegiansuppliers.no/company/wirescan-as-355


http://www.wirescan.no

Subsea Engineering

2020-01-21 - Wood


Wood is the world’s leading independent provider of subsea and export systems, engineering andtechnology solutions. From early phase, via FEED and detail design into the operational phase ofthe development, our multi-discipline teams can address scopes that cover the complete subseasystem or niche scopes requiring specialist consulting.




Reference

Wood websiteContact

Odd MohusDirector [email protected]+47 950 77 262www.woodplc.com

http://www.woodplc.com

http://norwegiansuppliers.no/company/wood-57




Pipeline & Riser Engineering

2020-01-21 - Wood


Wood is the world’s leading independent provider of subsea and export systems, engineering andtechnology solutions. From early phase, via FEED and detail design into the operational phase ofthe development, our multi-discipline teams can address scopes that cover the complete subseasystem or niche scopes requiring specialist consulting




Reference

Wood websiteContact







Subsea Technical Services

2020-01-21 - Wood


Wood is the world’s leading independent provider of subsea and export systems, engineering andtechnology solutions. From early phase, via FEED and detail design into the operational phase ofthe development, our multi-discipline teams can address scopes that cover the complete subseasystem or niche scopes requiring specialist consulting.




Reference

Wood websiteContact







Documents

Subsea Systems and Services - Norwegian Suppliers · Subsea studies and engineering. 2020-01-15 - Aker Solutions Category: Engineering & Services Subcategory: Subsea Engineering Type: