STORAGE HEATING COOLING SOLAR PRODUCT

1

THER

MO

HYDR

AULI

CSSTORAGE

HEATING

COOLING

SOLAR

ELBI QUBE:High efficiency multipurpose water heater

NEW PRODUCT

2

THERMHYDRAULICS

2

3

Elbi Qube: The high efficiency thermal device

ELBI has deep experience in the design and production of specific products for heating systems and for sanitary

water for both small residential infrastructures and large systems. By combining knowledge and experience, we have

conceived this heat accumulator with innovative features.

Qube overcomes the problems common to conventional storage tanks, bringing thermal efficiency to new levels and

setting new standards for hot water storage tanks. Qube is therefore ideal for meeting the needs of residential homes

and providing high comfort, as well as for reducing installation costs.

Qube is a new high-performance product that respects the environment.

Main features and benefits:

• Multifunction device combined and integrable with different set-ups

• Easier handling, installation and maintenance

• Maximized energy efficiency: class “A” and “A +”

• Instant supply of domestic hot water

• Corrosion resistant

• Pressure resistant

• Space-saving design

• Long lasting

Space-saving design and innovative technology.

The internal Qube tank is made using rotomolding technology

and it’s reinforced with glass fiber: this combination of materials

makes it very resistant compared to the corresponding

conventional products.

Qube was designed with a square shape, a design that makes

it compact for a more efficient use of space and improves its

thermal insulation characteristics.

In a system that uses thermal solar panels, the storage tank

becomes a central part of the system, and it guarantees

its efficiency. Numerous benefits are obtained by using an

adequate storage tank such as the Qube model.

3

4

Compatibility with multiple types of heating systems

Qube has been designed to function as an autonomous storage tank or in combination with other devices for any type

of heating system.

Main applications: wisely use of space

The Qube model for hot water storage can also be used for other purposes:

• solar storage tank

• autonomous storage tank

• buffer storage tank

• hydraulic storage tank

• combined tank

• domestic water heater

• backup electric heating

Designed to provide domestic hot water

Qube is a hot water storage tank. The sanitary water is heated instantly during use as a continuous flow device. The

water flows through the corrugated stainless steel pipes, remaining hygienic and clean. This operating mode reduces

the formation of Legionella and other germs in the water. We recommend heating the drinking water up to a maximum

temperature of 60 ° C in order to reduce the calcification of the heat exchanger and not to produce domestic hot water

at unnecessarily high temperatures. The stainless steel heat exchanger is also resistant to limescale deposits while

maintaining constant heat exchange capacity.

Instantly hygienically safe domestic hot water

Qube produces instant domestic hot water.

Instant heating of sanitary water limits the proliferation of Legionella.

Minimal heat loss

Qube is equipped with a stratified separator and stainless steel heat exchangers. These elements ensure a corrosion

resistance to the product (it does not require the use of anodes), prevent the formation of foul-smelling water inside

the tank and avoid unwanted chemical reactions.

The materials used for the realization of Qube are of high thermal insulation. The insulation is in low combustion class

B2 polyurethane foam according to DIN 4102, guaranteeing safety, high energy class, high efficiency and system

stability.

No corrosion

The combination of plastic and fiberglass composite materials gives corrosion resistance on both surfaces (internal

and external)

“A” and “A +” energy efficiency class

Composite plastic materials significantly reduce heat

loss: this is why the Qube storage tank has a 60%

lower heat loss than the corresponding traditional hot

water storage tanks.

Warranty and product life

5 year warranty and 30 years of expected product

life.

4

5

Optimized thermal stratification system and controlled diffusion

All entering, filling pipes, are positioned within the stratification tube. This

is made of stainless steel and has multiple openings positioned to support

the stratification process. The stratification tube keeps the thermal diffusion

controlled and stratifies the heat in several thermal layers, improving efficiency

and minimizing heat loss.

The incoming water of the heating system flows inside the stratification tube

and is positioned in the thermal layer corresponding to its temperature. The

direction of flow inside the tank depends on the model and its function in the

heating system.

Maximum efficiency

The Qube stratified separator storage tank provides hot water faster than

traditional tanks.

High resistance

Thanks to its excellent resistance, without welding joints and without weak

points, Qube can operate in absolute safety up to a constant operating pressure

of 6 bar and an operating temperature of 90 ° C. Qube is a pressure tank for

direct integration into heating systems.

Low maintenance

Thanks to the anti-corrosion plastic tank, it is not necessary to install anodes which should then be checked and re-

placed periodically. The stainless steel heat exchanger has a mirror surface finish, is made with a corrugated stainless

steel tube and the water that flows inside naturally generates vibrations and vortices that hinder deposits of limestone,

sediment or rust. Only the correct operation of the safety valve should be checked periodically.

Multifunction tank suitable for different types of use

Qube can be used and set up for multiple uses, such as: solar accumulator, combined accumulator of multiple heat

sources, pressure tank, thermal accumulator, hydraulic separator, water heater for sanitary water.

From simple storage tank to combined and integrable tank

Qube can be equipped with stratification tube, heat exchangers and backup electric heating in various combinations.

The tank enjoys maximum durability, all internal parts are removable and replaceable. The layout of Qube can also be

changed after purchase to meet new usage needs.

Qube is a one-of-a-kind storage tank that can be supplied substantially in 5 different variants, depending on the system

requirements.

You can use it as:

1. Pressure storage tank;

2. Separate storage tank;

3. Solar storage tank;

4. Domestic hot water tank;

5. Combined accumulator.

Qube can be installed in battery or as a single device.

5

6

KEYWORDD4: To the heating system (technical hot water outlet); D8: From boiler.

QUBE - Q-PUFFERBUFFER STORAGE TANKfor the storage of technical hot water (300 - 400 liters)

therMo-accUMUlator

V

ETRIF

ICATO

GLASSLINE

D

Q-PUFFER 300 - 400 Q-PUFFER

INSTALLATION:· traditional boilers (wall-hung and/or floor-standing)· condensing boilers· solar thermal systems· heat pumps

REFERENCE STANDARDSCYLINDER:2014/68/UE Directive – ART. 4.3, without CE markingDesigned and built in accordance with the requirements of the

2009/125/EC. and EU regulation 814/2013.

DESCRIPTION The installation of an accumulator is the first step to optimize the heating system and improve its efficiency.The storage tank absorbs the peaks of energy generators and, when required, releases energy into the system.

All the flanges are replaceable and can be modified in any other type of storage tank, if necessary.The insulation is made of high quality polyurethane, specific for low flammability level, class B2 according to DIN 4102.

D3D1 D4D2

D5 D6 D8D7

H

AB

743

743

ELBIQ-BE VERSIONE QPSTRAT VERSIONE QPUFVERSIONE QPPS1

IN

OUT

6

+ 90°C

6 bar

MAX WORKING TEMPERATUREHOT WATER sTORAGE TANK

FOR HEATING sysTEMsMAX WORKING PREssURE

RECOMMENDED EXPANSION TANKFor the SANITARY circuit:

Q-PUFFER 300: ELBI expansion tank D-DV series, AC-2 modelQ-PUFFER 400: ELBI expansion tank D-DV series, D-5 model

For water storage tank:Q-PUFFER 300: ELBI expansion tank ERCE series, ER-24 modelQ-PUFFER 400: ELBI expansion tank ERCE series, ERCE-35 model

WARRANTY: 5 YEARS

INSULATION: High quality polyurethane insulation, specific for low flammability level, class B2 according to DIN 4102. Expanded rigid polyurethane with 95% closed cells, esente da CFC e HCFC. Outer finish: PVC gray RAL 9006Thickness: min. 55 mm; Density: 40 Kg/m3; Initial thermal conductivity: 23,5 m W/m KInsulation thermal loss: Q-PUFFER 300 = 0,744 kWh/24h; Q-PUFFER 400 = 0,936 kWh/24h

8

7

INTERNAL TANK. EXTERNAL

ENERGY Diam. H DIMENSIONS Weight

CLASS Cap. D H1 L x L H P. m. Approx. A/h DN4 DN8

MODEL CODE litri mm mm mm mm mm Kg mm E I

Q-PUFFER 300 A39NH51 0G250 A+ 310 620 1300 734 x 734 1570 1740 74 1440 1"1/4 1"1/4

Q-PUFFER 400 A39NH54 0G250 A 440 620 1730 734 x 734 2000 2135 97 1870 1"1/4 1"1/4

DIMENSIONS

UniQubeHeart of your System

Floor heating Radiator heating

Dom

estic

hot

wat

er

Recir

cula

tion

Cold water in

UniPlate

Heat Pump

Pum

ping

sta

tion

HeatingController

Fan coilcooling/heating

UniQube

HeaT PUmP OR OTHeR

HeaT geNeRaTOR

FlOOR HeaTINg TRADITIONAL HeaTINg RadIaTOR HeaTINg

FaN cOIlcOOlINg/HeaTINg

HeaTINgcONTROlleR

7

D

E

I

Ø

H1

h H

a

e

I

l

INSTALLATION EXAMPLE

KEYWORD

E - To heating system (D4)I – To boiler (D8)

P.m. = Pivot measurement

8

QUBE - Q-PUFFER SBUFFER STORAGE TANK WITH THERMAL STRATIFIED SEPARATORfor the storage of technical hot water (300 - 400 liters)

therMo-accUMUlator

V

ETRIF

ICATO

GLASSLINE

D

Q-PUFFER S 300 - 400 Q-PUFFER S

DESCRIPTION Cylinder for solar thermal use with stratified separator tube.The hot water storage tank combined with the stratification unit is ideal for hydraulically separating the heat source circuit and the heating circuit; this allows easy control of the circulation pumps and improves their service life.Its functionality is based on the principle of hydraulic separator between the heating system and the circuit from another thermal source.

IN

OUTD3D1 D4D2

D5 D6 D8D7

H

AB

743

743


8

KEYWORDD3: From heating system; D4: To heating system (technical hot water outlet); D7: From boiler; D8: To boiler.

WARRANTY: 5 YEARS




+ 90°C

MAX WORKING TEMPERATUREHOT WATER sTORAGE TANK

FOR HEATING sysTEMs 6 bar

MAX WORKING PREssURE

RECOMMENDED EXPANSION TANKFor the SANITARY circuit:Q-PUFFER S 300: ELBI expansion tank D-DV series, AC-2 modelQ-PUFFER S 400: ELBI expansion tank D-DV series, D-5 model

For water storage tank:Q-PUFFER S 300: ELBI expansion tank ERCE series, ER-24 modelQ-PUFFER S 400: ELBI expansion tank ERCE series, ERCE-35 model

INSULATION: High quality polyurethane insulation, specific for low flammability level, class B2 according to DIN 4102. Expanded rigid polyurethane with 95% closed cells, esente da CFC e HCFC. Outer finish: PVC gray RAL 9006Thickness: min. 55 mm; Density: 40 Kg/m3; Initial thermal conductivity: 23,5 m W/m KInsulation thermal loss: Q-PUFFER s 300 = 0,744 kWh/24h; Q-PUFFER s 400 = 0,936 kWh/24h

9

DIMENSIONS

DN3 DN4 DN7 DN8

MODEL C E I J

Q-PUFFER s 300 1"1/4 1"1/4 1"1/4 1"1/4

Q-PUFFER s 400 1"1/4 1"1/4 1"1/4 1"1/4

9



Dom

estic

hot

wat

er

Recir

cula

tion

Cold water in

UniPlate

Heat Pump

Pum

ping

sta

tion

HeatingController


UniQube

TRADITIONAL HeaTINg RadIaTOR

HeaTINgFlOOR HeaTINg


POmPa dI calORe

TeRmO - RegOlaTORe

HeaTINg

cONTROlleR

HeaT PUmP OR OTHeR

HeaT geNeRaTOR

D

C E

I

S3

J

Ø

H1

h H

a

c e

I J

l


ENERGY Diam. H DIMENSIONS Weight

CLASS Cap. D H1 L x L H P. m. Approx. A/h

MODEL CODE litri mm mm mm mm mm Kg mm

Q-PUFFER s 300 A39sH51 0G250 A+ 310 620 1300 734 x 734 1570 1740 77 1440

Q-PUFFER s 400 A39sH54 0G250 A 440 620 1730 734 x 734 2000 2135 100 1870


KEYWORD

C - Heating inE - Heating outI – Boiler inJ – Boiler outs3 - Heating sensor

P.m. = Pivot measurement

10

QUBE - Q-PPS1BUFFER STORAGE TANK WITH THERMAL STRATIFIED SEPARATOR AND SOLAR HEAT EXCHANGERfor the storage of technical hot water (300 - 400 liters)

therMo-accUMUlator

V

ETRIF

ICATO

GLASSLINE

D

Q-PPS1 300 - 400 Q-PPS1

DESCRIPTION Cylinder for solar thermal use with stratified separator tube, with heat exchangerThe product can be used for heating water and to support heating systems.The tank acts as a heat layering device, as well as a hydraulic separator between the heat source circuit and the heating circuit. solar heat can be transferred and stored in the storage tanks and ready to be used on request.The solar heat exchanger is a corrugated tube made of 316 L stainless steel. All the flanges are replaceable and can be modified, therefore the product can be converted into any other model of the QUBE line, as needed

IN

OUTD3D1 D4D2

D5 D6 D8D7

H

AB

743

743


10

KEYWORDD3: From heating system; D4: To heating system (technical hot water outlet); D5: Auxiliary heat exchanger inlet; D6: Auxiliary heat exchanger outlet; D7: From boiler; D8: To boiler.

WARRANTY: 5 YEARS




+ 90°C

CyLINDER MAX WORKINGTEMPERATURE

HOT WATER sTORAGE TANK



INOX HEAT EXCHANGER+ 90°C

HEAT EXCHANGER MAXTEMPERATURE

10 bar

HEAT EXCHANGERMAX WORKING PREssURE

RECOMMENDED EXPANSION TANKFor the SANITARY circuit:Q-PPS1 300: ELBI expansion tank D-DV series, AC-2 modelQ-PPS1 400: ELBI expansion tank D-DV series, D-5 model

For water storage tank:Q-PPS1 300: ELBI expansion tank ERCE series, ER-24 modelQ-PPS1 400: ELBI expansion tank ERCE series, ERCE-35 model

INSULATION: High quality polyurethane insulation, specific for low flammability level, class B2 according to DIN 4102. Expanded rigid polyurethane with 95% closed cells, esente da CFC e HCFC. Outer finish: PVC gray RAL 9006Thickness: min. 55 mm; Density: 40 Kg/m3; Initial thermal conductivity: 23,5 m W/m KInsulation thermal loss: Q-PPS1 300 = 0,744 kWh/24h; Q-PPS1 400 = 0,936 kWh/24h

11

DIMENSIONS

11

D

C E

I

S3

J

Ø

H1

h H

a

F G

S2

l



Dom

estic

hot

wat

er

Recir

cula

tion

Cold water in

UniPlate

Heat Pump

Pum

ping

sta

tion

HeatingController


UniQubeTeRmO - RegOlaTORe

FlOOR HeaTINgTRADITIONAL

HeaTINg RadIaTOR HeaTINg


POmPa dI calORe

PUm

PINg

IST

aTIO

N

SOlaRPaNelS

HeaTINg

cONTROlleR

HeaT PUmP OR OTHeR

HeaT geNeRaTOR


DN3 DN4 DN5 DN6 DN7 DN8

MODEL C E F G I J

Q-PPs1 300 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4

Q-PPs1 400 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4

. INTERNAL TANK. EXTERNAL

ENERGY HEAT EXC Diam. H DIMENSIONS Weight

CLASS Cap. H1 D H1 L x L H P. m. Approx. A/h

MODEL CODE litri m2 lt mm mm mm mm mm Kg mm

Q-PPs1 300 A39TH51 0G250 305 1,2 5 620 1300 1300 734 x 734 1570 1740 87 1440

Q-PPs1 400 A39TH54 0G250 432 2 9 620 1730 1730 734 x 734 2000 2135 118 1870

INOX SOLAR HEAT EXCHANGER

MODEL Heat exc.. Pr. max. Cap. Outputarea

dimensions bar litri m2

Q-PPs1 300 1.1/4” 10 5 1,2

Q-PPs1 400 1.1/4” 10 8 2

PRESSURE DROP

MODEL SOLAR HEAT

EXC.

Q-PPs1 300 2 mbar

Q-PPs1 400 32 mbar

KEYWORD

C - Heating inE - Heating outF - solar inG - solar outI – Boiler inJ – Boiler outs2 - solar sensors3 - Heating sensor

12

QUBE - Q-CQSSTRATIFIED BUFFER STORAGE TANK WITH STAINLESS STEEL DHW HEAT EXCHANGERfor instant Dhw ProDUction (300 - 400 liters)

therMo-accUMUlator

V

ETRIF

ICATO

GLASSLINE

D

Q-CQS 300 - 400 Q-CQS

DESCRIPTION The Q-CQs model is a boiler for the instantaneous production of domestic hot water (DHW) equipped with a heat exchanger for DHW in stainless steel 316 L with corrugated pipe, as well as the stratified separator tube.The product can be used for heating sanitary water and to support heating systems.The tank acts as a heat layering device, as well as a hydraulic separator between the heat source circuit and the heating circuit. solar heat can be transferred and stored in the storage tanks and ready to be used on request.The solar heat exchanger is made of 316 L stainless steel with a corrugated tube. All the flanges are replaceable and can be modified, therefore the product can be converted into any other model of the QUBE line, as needed.

IN

OUTD3D1 D4D2

D5 D8D7D6

H

AB

743

743

ELBIQ-BE VERSIONE QCQP VERSIONE QCQS

12

KEYWORDD1: Cold domestic water inlet; D2: Hot domestic water outlet (DHW); D3: From heating system; D4: To heating system (technical hot water outlet); D7: From boiler; D8: To boiler..

WARRANTY: 5 YEARS




+ 90°C

CyLINDER MAX WORKINGTEMPERATURE




INOX HEAT EXCHANGER

+ 90°C

INOX HEAT EXCHANGER MAX TEMPERATURE

10 bar

INOX HEAT EXCHANGERMAX WORKING PREssURE

FOR sANITARy HOT WATER

RECOMMENDED EXPANSION TANKFor the SANITARY circuit:Q-CQS 300: ELBI expansion tank D-DV series, AC-2 modelQ-CQS 400: ELBI expansion tank D-DV series, D-5 model

For water storage tank:Q-CQS 300: ELBI expansion tank ERCE series, ER-24 modelQ-CQS 400: ELBI expansion tank ERCE series, ERCE-35 model

INSULATION: High quality polyurethane insulation, specific for low flammability level, class B2 according to DIN 4102. Expanded rigid polyurethane with 95% closed cells, esente da CFC e HCFC. Outer finish: PVC gray RAL 9006Thickness: min. 55 mm; Density: 40 Kg/m3; Initial thermal conductivity: 23,5 m W/m KInsulation thermal loss: Q-CQS 300 = 0,744 kWh/24h; Q-CQS 400 = 0,936 kWh/24h THERMAL YIELD: see page 16

13

DIMENSIONS

13



Dom

estic

hot

wat

er

Recir

cula

tion

Cold water in

UniPlate

Heat Pump

Pum

ping

sta

tion

HeatingController


UniQube




cOld WaTeR IN

POmPa dI calORe

TeRmO - RegOlaTORe

dOme

STIc

HOT

WaT

eR

RecI

RcUl

aTIO

N

HeaTINg

cONTROlleR

HeaT PUmP OR OTHeR

HeaT geNeRaTOR


INOX HEAT EXCHANGER


dimensions bar lt m2

Q-CQs 300 1.1/4” 10 15 3,8

Q-CQs 400 1.1/4” 10 19 5

DN1 DN2 DN3 DN4 DN7 DN8

MODEL A B C E I J

Q-CQs 300 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4

Q-CQs 400 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4


ENERGY HEAT EXC Diam. H DIMENSIONS Weight

CLASS Cap. D H1 L x L H P. m. Approx. A/h

MODEL CODE litri m2 lt mm mm mm mm mm Kg mm

Q-CQs 300 A390H51 0G250 A+ 295 3,8 15 620 1300 734 x 734 1570 1740 108 1440

Q-CQs 400 A390H54 0G250 A 421 5 19 620 1730 734 x 734 2000 2135 142 1870

D

A B C E

I

S3

S4

J

Ø

H1

h H

a

D

A B C E

I

S3

S4

J

Ø

H1

h H

alPRESSURE DROP

MODEL HEAT EXC.

Q-CQs 300 45 mbar

Q-CQs 400 207 mbar

LEGENDA

A – Cold water inB – Hot water outC - Heating inE - Heating outI – Boiler inJ – Boiler outs3 - Heating sensors4 - DHW temperature sensor

14

QUBE - Q-CQPSTRATIFIED BUFFER STORAGE TANK WITH TWO STAINLESS STEEL DHW HEAT EXCHANGERSfor instant Dhw ProDUction anD technical hot water (300 - 400 litri)

therMo-accUMUlator

V

ETRIF

ICATO

GLASSLINE

D

Q-CQP 300 - 400 Q-CQP

DESCRIPTION Integrated 6-function tankThe Q-CQP model represents an “all-in-one” solution for high efficiency central heating systems. it is fully equipped by combining several functions together: continuous flow hot water tank (dhw), hot water storage tank, hydraulic separator between the heat source circuit and the heating circuit, thermal stratification tube, solar accumulator and solar integration for the heating system.The Q-CQP model is equipped with the following devices:• heat exchangers for DHW in stainless steel 316 L with corrugated pipe• solar heat exchanger in stainless steel 316 L with corrugated pipe• stratified separator tube• all the flanges are replaceable and can be modified, therefore the product can be converted into any other model of the QUBE line, as needed.• electric heating integration

D3D1 D4D2

D5 D8D7D6H

AB

743

743


IN

OUTD3D1 D4D2

D5 D8D7D6

H

AB

743

743


14

KEYWORDD1: Cold domestic water inlet; D2: Hot domestic water outlet (DHW); D3: From heating system; D4: To heating system (technical hot water outlet); D5: Auxiliary heat exchanger inlet; D6: Auxiliary heat exchanger outlet; D7: From boiler; D8: To boiler.

+ 90°C

CyLINDER MAX WORKING TEMPERATURE


FOR HEATING sysTEMs

6 bar

CyLINDER MAX WORKING PREssURE

sCAMBIATORE INOX

+ 90°C

INOX HEAT EXCHANGER MAX TEMPERATURE

10 bar

INOX HEAT EXCHANGERMAX WORKING PREssUREFOR sANITARy HOT WATER

+ 90°C

sOLAR HEAT EXCHANGER MAX TEMPERATURE

10 bar

sOLAR HEAT EXCHANGERMAX WORKING PREssURE

REFERENCE STANDARDSCYLINDER:2014/68/UE Directive – ART. 4.3, without CE markingDesigned and built in accordance with the requirements of the2009/125/EC. and EU regulation 814/2013

RECOMMENDED EXPANSION TANKFor the SANITARY circuit:Q-CQS 300: ELBI expansion tank D-DV series, AC-2 modelQ-CQS 400: ELBI expansion tank D-DV series, D-5 model

For water storage tank:Q-CQS 300: ELBI expansion tank ERCE series, ER-24 modelQ-CQS 400: ELBI expansion tank ERCE series, ERCE-35 model

WARRANTY: 5 YEARS


INSULATION: High quality polyurethane insulation, specific for low flammability level, class B2 according to DIN 4102. Expanded rigid polyurethane with 95% closed cells, esente da CFC e HCFC. Outer finish: PVC gray RAL 9006Thickness: min. 55 mm; Density: 40 Kg/m3; Initial thermal conductivity: 23,5 m W/m KInsulation thermal loss: Q-CQP 300 = 0,744 kWh/24h; Q-CQP 400 = 0,936 kWh/24h THERMAL YIELD: see page 16

15

DIMENSIONS

15

INOX HEAT EXCHANGER



Q-CQP 300 1.1/4” 10 15 3,8

Q-CQP 400 1.1/4” 10 19 5

DN1 DN2 DN3 DN4 DN5 DN6 DN7 DN8

MODEL A B C E F G I J

Q-CQP 300 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4

Q-CQP 400 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4 1"1/4


ENERGY HEAT EXCHANGER Diam. H DIMENSIONS Weight

CLASS Cap. INOX SOLAR D H1 L x L H P. m. Approx. A/h

MODEL CODE litri m2 lt m2 lt mm mm mm mm mm Kg mm

Q-CQP 300 A391H51 0G250 A+ 290 3,8 15 1,2 5 620 1300 734 x 734 1570 1740 119 1440

Q-CQP 400 A391H54 0G250 A 413 5 19 2 9 620 1730 734 x 734 2000 2135 160 1870

SOLAR HEAT EXCHANGER



Q-CQP 300 1.1/4” 10 5 1,2

Q-CQP 400 1.1/4” 10 8 2

PaNNellISOlaRI



Dom

estic

hot

wat

er

Recir

cula

tion

Cold water in

UniPlate

Heat Pump

Pum

ping

sta

tion

HeatingController


UniQube



POmPa dI calORe

FaN cOIlcOOlINg/HeaTINgTeRmO -

RegOlaTORe

PUm

PINg

IST

aTIO

N

cOld WaTeR IN

dOme

STIc

HOT

WaT

eR

RecI

RcUl

aTIO

N

HeaTINg

cONTROlleR

HeaT PUmP OR OTHeR

HeaT geNeRaTOR

SOlaRPaNelS


D

A B C E

I

S3

S4

J

Ø

H1

h H

a

F G

S2

lPRESSURE DROP

MODEL INOX HEAT SOLAR HEAT

EXCHANGER EXCHANGER

Q-CQP 300 45 mbar 2 mbar

Q-CQP 400 207 mbar 32 mbar

LEGENDA

A – Cold water inB – Hot water outC - Heating inE - Heating outF - solar inG - solar outI – Boiler inJ – Boiler outs2 - solar sensors3 - Heating sensors4 - DHW temperature sensor

16

THERMAL YIELD

ACCUMULATION AT 60 °CsTAINLEss sTEEL HEAT EXCHANGER: T.inlet = 15°C; T.outlet = 45°C.

Continuous production of hot water at 45 °C with accumulation at 60 °C

MODEL THERMALPOWER

kW

PRODUCTIONDHW AT 45°C

lt/h

Q-CQs 300 22 630

Q-CQs 400 33 855

Q-CQP 300 22 630

Q-CQP 400 33 855



MODEL THERMALPOWER

kW


lt/h

Q-CQs 300 38 1080

Q-CQs 400 50 1450

Q-CQP 300 38 1080

Q-CQP 400 50 1450



MODEL THERMALPOWER

kW


lt/h

Q-CQs 300 51 1455

Q-CQs 400 68 1945

Q-CQP 300 51 1455

Q-CQP 400 68 1945

17

18

19

Fermo restando le caratteristiche basilari del prodotto, la società si riserva di apportare modiFiche in ogni momento al solo scopo di miglioramento.

While the basic features of the product Will remain unchanged, the company reserves the right to make any change to its products Without need for prior notice.

i colori e le MisUre riProDotti nei cataloghi sono inDicativi.

the colours and dimensions shoWn in the catalogue are an indication only.

e’ vietata la riProDUzione anche Parziale Di qUesto catalogo.

it is forbidden to reproduce any part of this catalogue.

Print: february 2020

20

cod

. 810

90

77 V

300

0 -

02/

2020

Elbi S.p.A.Sede legale estabilimento principale:C.P. 103 - Via Buccia, 935010 LIMENA (PD)Tel +39-049-8840677Fax +39-049-8841610.Stabilimento e deposito di Modugno:Via delle Magnolie, 1970026 MODUGNO (BA)Tel +39-080-5316843Fax +39-080-5316822.

Elbi of America, IncHouston, TX 77032Tel. 001 (713) 674-2900Fax 001 (713) 674-2982www.elbi.net

Brea, CA 92821Tel. 001 (714) 674-0590.

[email protected]

Documents

STORAGE HEATING COOLING SOLAR PRODUCT