STOCK MAKING AND FINISHING - media.midwayusa.com · STOCK MAKING AND FINISHING Socket Head Stock Bolt Assembly This kit makes stock removal easy, even without removing the recoil

760 midwayusa.com 1-800-243-3220 Since 1977

STOCK MAKING AND FINISHING

Socket Head Stock Bolt Assembly

This kit makes stock removal easy, even without removing the recoil pad. Requires cutting a small access hole in the recoil pad for the stock wrench. Each kit comes with stock bolt assembly, stock wrench and wrench guide. Description ............................................................... Product # .....PriceBeretta 680, 682 ................................................................................................889-608 ..........$25.99Browning Citori without Tang Screw .....................................................421-112 ..........$25.99Krieghoff K-80 .....................................................................................................997-767 ..........$25.99Krieghoff Model 32 ..........................................................................................513-941 ..........$25.99Ljutic New-Style w/6" Stock Bolt ............................................................415-041 ..........$25.99Ljutic Old-Style w/4" Stock Bolt ...............................................................435-486 ..........$25.99Perazzi .....................................................................................................................764-719 ..........$25.99SKB w/Tang Screws .........................................................................................851-066 ..........$31.99SKB without Tang Screws .............................................................................328-177 ..........$31.99Winchester Over-Under without Tang Screws ...............................810-249 ..........$25.99

Stock Takedown ToolsAll accessories fit a 3/8" square drive.

Bit .............................................................................. Product # .....Price3/8" ............................................................................................................................593-174 ............ $5.997/16" .........................................................................................................................736-451 ............ $5.891/2" ............................................................................................................................284-962 ............ $5.8913mm ......................................................................................................................834-144 ............ $6.69Flat Blade ...............................................................................................................484-515 ..........$14.29Extension ................................................................... Product # .....Price6" ................................................................................................................................296-777 ..........$11.7912" (A) ....................................................................................................................914-475 ..........$15.49Handle ....................................................................... Product # .....PriceSliding T-Handle (B) .........................................................................................859-743 ..........$23.49

AB

100 STRAIGHT Qty Black WhiteButtstock Spacer Prod # Price Prod # Price1/8" 1 489-552 $5.99 417-322 $5.991/4" 1 655-397 $5.99 460-817 $5.991/2" 1 243-166 $9.99 819-858 $9.99

Qty Positive NegativePitch Spacer Prod # Price Prod # Price1/4" 1 310-678 $7.99 391-635 $7.991/2" 1 371-067 $10.99 446-142 $10.99KICK EEZ Qty Black SilverMetal Eez Stock Spacer Prod # Price Prod # PriceBenelli Super Black Eagle, Benelli Super 90 M1, M3 1 - - 950-773 $28.99

Browning Gold, Browning BPS, Winchester Super X2 1 - - 224-350 $28.99

Length Spacer Prod # Price - -1/8" 1 567-275 $4.99 - -1/4" 1 175-714 $4.99 - -1/2" 1 463-351 $9.49 - -Pitch Spacer Prod # Price - -1/4" 1 694-391 $6.99 - -1/2" 1 397-244 $11.99 - -MILES GILBERT Qty WhiteForend Tip Spacer Prod # PriceSporter 1 629-905 $3.49Grip Cap Spacer Prod # PriceSmall Oval 1 173-192 $3.49Teardrop 1 747-085 $3.59PACHMAYR Qty Black WhitePachmayr Prod # Price Prod # Price1/16" 1 - - 918-520 $7.791/4" 1 185-384 $7.79 - -

Buttstock Spacer

Slip-On Recoil PadSlips over buttstock and is held in place with an overlapping hook and loop fastener. Features 1/2" of shock-absorbing gel built into the pad.Height ........ Width ...... Color .... Product # .....Price4-13/16" ............1-7/16" ...........Brown ...........260-547 ..........$62.365" .............................1-1/2" ............Brown ...........547-301 ..........$62.365-3/16" .................1-1/2" ............Brown ...........274-998 ..........$62.365-5/16" .................1-5/8" ............Brown ...........174-356 ..........$62.365-1/2" .................1-13/16" .........Brown ...........446-748 ..........$62.36

Deluxe Slip-On Recoil Pad

This deluxe recoil pad offers a smooth transition and excellent look with both wood and synthetic stocks. Made of recoil-absorbing elastomer rubber, it provides excellent comfort, even during extended shooting sessions. Slip-on design for easy installation.Description .............. Color .... Product # .....Price5" x 1-1/2" x 3/4" ...............Brown ...........134-415 ..........$12.995-1/4" x 1-9/16" x 3/4" ....Brown ...........355-970 ..........$12.995-5/16" x 1-3/4" x 3/4" ....Brown ...........753-368 ..........$12.99

Slip-On Recoil PadEasy to install and superior recoil reduction. This Slip-On pad features an innovative recoil reduction technology that absorbs recoil and vibration through a proprietary material called NAVCOM.Description ....................... Color .... Product # .....PriceSmall 4-5/8" x 1-1/2" ........................Black ............564-546 ..........$34.99Medium 5" x 1-5/8" ..........................Black ............755-820 ..........$34.99Large 5-1/4" x 1-3/4" .......................Black ............748-889 ..........$34.99

Slip-On Recoil PadPads are easy to install and have excellent recoil absorbing qualities. No alteration to your stock is necessary. Pads are also great for temporarily adding length to your stock. Deluxe slip-on pads feature a hidden Velcro strap that tightens the pad around the buttstock.

Standard Rubber ......................................Black #.... Brown # ......PriceSmall 5" x 1-1/2" x 3/4" .....................................................320-167 .........278-954 ..........$13.99Medium 5-1/8" x 1-5/8" x 3/4" (A) ............................845-456 .........297-395 ..........$13.99Large 5-3/8" x 1-3/4" x 3/4" ...........................................890-818 .........319-031 ..........$13.99Deluxe Leather .........................................Black #.... Brown # ......PriceSmall 5" x 1-1/2" x 3/4" .....................................................288-031 .........376-688 ..........$28.99Large 5-3/8" x 1-3/4" x 3/4" (B) ...................................939-603 .........292-314 ..........$28.99

Slip-On Decelerator Recoil PadThis slip-on pad features excellent Decelerator recoil reduction, and has been redesigned for a streamlined look and smooth handling. Includes the new Speed Mount insert for snag-free gun mounts. No alteration to your gun required for installation.

Small ........................................................... Color .... Product # .....Price3/4" x 5" x 1-1/2" ......................................................................Black ............725-446 ..........$22.493/4" x 5" x 1-1/2" ....................................................................Brown ...........520-759 ..........$22.49Medium ...................................................... Color .... Product # .....Price3/4" x 5-1/8" x 1-5/8" ...........................................................Brown ...........546-531 ..........$22.493/4" x 5-1/8" x 1-5/8" .............................................................Black ............918-144 ..........$22.49Large ........................................................... Color .... Product # .....Price3/4" x 5-3/8" x 1-3/4" ...........................................................Brown ...........184-314 ..........$22.493/4" x 5-3/8" x 1-3/4" .............................................................Black ............829-223 ..........$22.49

AB

Since 1977 1-800-243-3220 midwayusa.com 761


Recoil Pad Adapter for Synthetic Stock

With this adapter, any Pachmayr recoil pad can be easily attached to synthetic or fiberglass stocks. Large adapter fits medium and large recoil pads, small adapter fits small pads. 1/4" thick. Black. Description ............................................ Product # .....PriceSmall ...........................................................................................477-681 ..........$11.99Large ..........................................................................................724-029 ..........$11.99

Slick Eez Recoil Pad TreatmentSlick Eez is a tough, flexible, transparent coating which, when applied to the heel, toe or sides of recoil pads, makes a slick, non-grabbing surface. Aids in a fast, uniform gun mount. Includes one bottle of recoil pad treatment and one bottle of recoil pad cleaner, enough to cover several recoil pads. Instructions are included in the package.

# 468-132...........................................................................................................................................$25.99

Slip-On Recoil PadInstalling this recoil pad is a quick and easy way to make your rifle or shotgun more comfortable to shoot. Made of Sorbothane which is considered one of the best shock absorbing materials available today. Inserts are available (sold separately) for extra recoil protection and length of pull. Each insert is 1/4" thick.Recoil Pad.................................................................. Product # .....PriceSmall 4-1/2" x 1-1/2" up to 4-13/16" x 1-5/8" .................................651-868 ..........$30.99Medium 4-13/16" x 1-5/8" up to 5-1/8" x 1-3/4" ...........................937-500 ..........$30.99Large 4-1/2" x 1-1/2" up to 4-13/16' x 1-5/8" .................................131-226 ..........$30.99Inserts ........................................................................ Product # .....PriceSmall, per 2 ...........................................................................................................549-344 ..........$12.99Medium, per 2 ....................................................................................................588-956 ..........$12.99Large, per 2 ..........................................................................................................410-757 ..........$12.99

Recoil Pad Grinding Templates

Set of 4 brass templates for grinding pads to fit. Includes small, medium, large and large magnum templates.

# 780-244........................................................ $15.49

Adjustable Recoil Pad AssemblyCurved or straight, this recoil pad assembly provides protection, comfort and can even help improve accuracy. Includes a buttpad and recoil pad. Minor fitting will be required for installation.

Recoil Pad Assembly ................................................ Product # .....PriceCurved ....................................................................................................................343-754 ..........$38.99Premium Curved (Pictured).......................................................................145-894 ..........$65.99Premium Long Curved ..................................................................................330-244 ..........$63.99Straight ....................................................................................................................219-943 ..........$38.99Premium Straight ..............................................................................................548-927 ..........$65.99Premium Long Straight ..................................................................................136-339 ..........$63.99Replacement Recoil Pad .......................................... Product # .....PriceCurved ....................................................................................................................782-874 ..........$27.99Straight ....................................................................................................................644-049 ..........$27.99Replacement Buttplate ........................................... Product # .....Price Premium.................................................................................................................651-696 ..........$21.99Premium Long ....................................................................................................550-793 ..........$21.99Premium Extra Long .......................................................................................484-648 ..........$21.99 Polymer ...................................................................................................................788-345 ..........$11.79

4-Way Adjustable ButtplateAdjustable for length, height, cant and offset. Fits most competition style target stocks. Gunsmith installation required.

# 839-955 ...................................................................................$139.99

Stock Adjuster Pad Plate for ButtpadProvides the versatility of a stock adjuster while adding 1/4" in length. Provides up to 1" vertical drop, 40° diagonally right or left and 5/16" horizontal offset of the recoil pad. Constructed of 6061 aluminum with machined steel thread inserts and has a black anodized finish. Fits recoil pads with 3-1/8" hole spacing. Dimensions are 5-3/4" x 2" x 1/4" thick. Includes hardware and instructions.

# 147-276 ...................................................................................................................$66.99

CPS Pad Popper Recoil Pad Mounting Hardware

This set allows the user to pre-fit several recoil pads to a gun and then switch them out in seconds. A perfect way to add versatility to a gun. Includes 2 steel stock inserts, 2 screws, 2 Allen wrenches and complete instructions.

# 772-132...........................................................................................................................................$15.99

Jones Stock Adjuster Pad Plate for Buttpad

Provides the versatility of a recoil pad adjustment system and adds 1/4" to the length of pull. Features 1" vertical adjustment, 5/16" horizontal adjustment and 22° of rotation left or right. Designed for recoil pads with 3-1/8" hole spacing. 5-3/4" x 2" x 1/4".

# 150-923 ..................................................................................................................$61.99

CPS Recoil Pad Hole PunchQuickly and easily punch mounting holes into any rubber recoil pad.

Description ............................................................... Product # .....Price1/8" Holes .............................................................................................................332-144 ..........$19.791/4" Holes .............................................................................................................143-360 ..........$19.79

Niedner-Style ButtplateThis steel buttplate features a Niedner-Style checkered face.

Miles Gilbert ............................................... Product # .....PriceCheckered Buttplate Only (Pictured).............................392-333 ..........$34.99Checkered Buttplate and Grip Cap.................................113-848 ..........$48.99Sunny Hill ......................................Qty...... Product # .....PriceCheckered Buttplate ............................................1 .................619-353 ..........$34.00Replacement Screws ............................................4 .................926-274 ............ $2.29

Universal Recoil Pad Fitting FixtureDifferent than most other pad sanding fixtures, this unit has an 1-1/2" wide base plate that will not tilt when sawing or sanding. The top plate is 4" long with a series of small slots to accept #10 screws, for holding hardware type plates for band-sawing, belt sanding or disc sanding. Being able to sand close to your layout lines will make finial finishing easier without heat buildup and less dust. Fitting and finishing recoil pads in the same way is quick and easy. Setting the "toe angle" or the "heel angle" is easy and positive locking with the Torx screw and wrench. Complete with mounting screws and Torx wrench.

# 146-053...........................................................................................................................................$54.99

Graco



Recoil Pad Installation Fixture

Designed for rifle and shotgun applications, this jig allows perfect installation of recoil pads without fear of stock damage. All shaping is done with a table, disc or belt sander.

# 658-338...........................................................................................................................................$50.99

Forend TipMannlicher-style muzzle caps are steel and require gunsmithing. Polymer tips are ready to be sanded and finished. Ebony Block can be shaped into a forend tip for any stock and also works to create grip caps.Callahan..................................................................... Product # .....PriceEbony Forend Tip Blank (A) .......................................................................395-080 ..........$12.99Miles Gilbert ............................................Size ......... Product # .....PricePolymer 45° Sporter (B) ....................................1.25" x 1.2" x 2" ......566-727 ............ $8.99NECG ......................................................Finish ....... Product # .....PriceMannlicher-Style 0.575" Inside Dia (C) ...................Blue ...................657-822 ..........$46.99Mannlicher-Style 0.610" Inside Dia .............................Blue ...................695-187 ..........$46.99

B C

Dakota ButtplateSteel buttplate is ready for fitting and finishing. Steel in the white. Description .................................... Product # .....PriceDouble-Scalloped Skeleton-Style (A) .........263-743 .......$247.99Scalloped Skeleton-Style .....................................453-230 .......$247.99Solid (B) ........................................................................974-721 .......$247.99Traditional Skeleton-Style ...................................882-322 .......$247.99

A

BA

This mechanical drawing by Jerry Fisher works great as a reference tool, or simply as art to hang on the wall. Black and white. 23" x 35".Description ............................................................... Product # .....PriceMauser 98 .............................................................................................................420-284 ..........$23.99Winchester 70....................................................................................................485-243 ..........$23.99

Stockmaker's Full Scale Mechanical Stock Drawing Model

Jerry Fisher

Sling Swivel Studs and SpacersBrockman's ............................................................... Product # .....PriceMagnum (A) ........................................................................................................466-042 .........$24.99NECG ........................................................................ Product # .... PriceClassic Swivel Stud w/Machine Screw (B) ..........................................851-393 ..........$23.99Classic Swivel Stud w/Wood Screw ......................................................870-735 .........$23.99Ruger ......................................................................... Product # .....PriceFront Stud 77/44 RSP (C) ...........................................................................134-449 ........... $1.99Rear Mounting Stud 77/22, 77/17 Standard, Varmint, 77/22 Hornet, 77/44, 77 Mark 2 All Models, 77/50 All Models, Number 1, Carbine PC9GR, PC4GR, Deerfi eld Carbine 99/44 ........................................................463-645 ........... $1.99Uncle Mike's .................................................Qty...... Product # .....Price1/2" Screw, 3/4" Screw and White Spacers (D) ..........1 .................887-160 ........... $2.597/8" Screw, 3/4" Screw and White Spacers ...................1 .................366-960 ........... $2.59White Spacers (E) ...................................................................... 12 ...............518-635 ........... $3.59

A B

C D E

Swivel BaseBoth the base and base stud screw are made of steel are ready to be finished as needed and installed.Description ................................................ Finish .... Product # .....PriceOval-Sided Base ........................................................................ Blue .............952-787 ..........$28.99Straight-Sided Base (Pictured).................................. In the White ....153-133 ..........$28.99Base Stud Screw ............................................................... In the White ....362-103 ............ $3.49

Non-Detachable Sling Swivel

Description ......................Width .......... Finish ........ Product # .....PriceConcave Base......................................... 1" .........................Blue ....................249-123 ..........$24.99Convex Base........................................... 1" .........................Blue ....................749-209 ..........$24.99Flat Base .................................................... 1" .........................Blue ....................168-174 ..........$24.99Mannlicher -Style (Pictured) .......... 1" .........................Blue ....................570-006 ..........$15.99Screw-On ...............................................7/8" .......................Blue ....................830-065 ..........$28.99Screw-On ................................................. 1" .........................Blue ....................861-839 ..........$28.99

Crossbolt for Magnum Rifl e Stock

A steel crossbolt strengthens the stock to prevent splitting under heavy recoil or rough use. Gunsmith installation required. In the white.

# 752-327.............................................................................................................................................$6.29


STOCK MAKING AND FINISHINGSwivel Mounting Tools

NECG ........................................................................ Product # .....PriceClassic Swivel Stud Installation Tool ........................................................321-799 .........$55.99Includes counterbore, drill and tapRuger #1 Forend Escutcheon Counterbore (A) ...........................948-247 .........$39.99The Outdoor Connection........................................ Product # .....PriceSling Swivel Stud Step Drill Bit Set Hardened Steel (B) ............643-466 .........$16.29Prevents swivel from touching firearm when sling is properly connectedUncle Mike's .............................................................. Product # .....PriceSwivel Mounting Step Drill Set (C) ........................................................786-709 .........$30.99Step drills for swivel mounting. Drill bits drill and countersink in a single step. Includes front and rear drills.

A

B

C

Sling Swivel Stud Installation Kit Designed to be used with a 1/4" drill or drill press, this handy kit allows fast acquisition of center for that professional quality installation. Comes with a 5/32" drill bit with adjustable drill stop, 7/32" adjustable safety counterbore drill bit and a #10 drill bit and guide jig.

# 783-373...........................................................................................................................................$52.99

Flush Mount Sling SwivelsDesigned to give rifles a clean, custom appearance while providing a solid sling mounting system. They are designed so that only a small spherical button is visible on the stock. The installation kit includes a universal mounting base, steel drill guide, drill with pre-set stop collar, padded stock clamps, and swivel installation tools. Description ..................................................Qty...... Product # .....PriceSling Swivels (Pictured) ..............................................................2 .................662-393 ..........$22.49 Accessories ..................................................Qty...... Product # .....Price Installation Kit ..............................................................................N/A .............531-807 .......$136.99 Forearm Insert ...............................................................................1 .................493-963 ............ $8.49 Rear Insert ........................................................................................1 .................888-005 ............ $8.49 Swivel Loop......................................................................................1 .................183-451 ............ $4.99

Sling SwivelsDescription ...............................................Finish ........Product # ...PriceEuropean Sling Swivel Base Set (A) ..............Steel in the White ....110-522 .......$23.99 Oval Sling Swivel Base Set (B) .........................Steel in the White ....584-885 .......$23.99 Sling Swivel Base Forend Screw and Nut .....................................Steel in the White ....714-150 ......... $3.49Straight Sling Swivel Base Set............................Steel in the White ....486-682 .......$22.99

A B

Piloted Aircraft Counterbore Drill BitMade of high speed steel, this interchangeable pilot counterbore features a four flute cutting head and 1/4” straight shank. Designed to enlarge an existing hole for hiding a screw head or seating a nut. Must be used with 1/8" shank counterbore pilot (sold separately). Counterbore Diameter ........................................... Product # .....Price9/16" .........................................................................................................................529-417 ..........$44.995/8" ............................................................................................................................298-321 ..........$48.99

Aircraft Counterbore Drill Bit PilotCarbon steel counterbore pilot features 1/8” shank and is designed to be used with a piloted counterbore drill bit. Shank diameter must be the same as the pilot hole diameter in the counterbore. The pilot diameter is always larger that the shank diameter and is determined by the pilot hole.Pilot Diameter ........................................... Product # .....Price1/4" .....................................................................................................581-248 ............ $5.999/32" ..................................................................................................833-673 ............ $5.995/16" ..................................................................................................928-806 ............ $5.99

Stock Repair PinStainless steel threaded rod helps fix stocks that are broken or cracked. Package includes three 12" sections.Description ............................................................... Product # .....Price3/32" .........................................................................................................................125-384 ............ $9.991/8" ............................................................................................................................610-498 ............ $9.99

Hollow Screw ExtractorTool removes broken screws, leaving a neat hole that can be easily fi lled. Perfect for removing broken buttplate screws. For use with a power screwdriver or drill. Size listed will be the diameter of resulting hole.Description ..............................................................Product # ..... Price1/4" ..........................................................................................................................981-354 ...........$13.295/16" .......................................................................................................................482-853 ...........$14.29

Sling Swivel Drill Fixture

Guides the drill bit while installing sling swivels. Holds material up to 5-1/2" long. Steel and aluminum.

# 375-761........................................................................................................................................$139.99

Kleinendorst

Wood Stippling Punch

Used as a quick and easy alternative to hand checkering, this stippling punch will create a customized, non-slip grip area by pressing or driving it into a stock, forend or handgun grip.Description ............................................................... Product # .....Price16 Lines Per Inch ...............................................................................................912-967 ..........$17.99



Thumb Plane When making a gunstock, every cut, chisel and carve counts. For precision cutting, this thumb plane shaves off pieces of wood millimeters at a time. Its curved blade is 18mm wide. Perfect for all types of woodworking projects.

# 683-722.............................................................................................$51.99

Carving Tool SetGeneral ......................... Product # .. PriceSet includes: Bent large gouge, straight small gouge, bent V parting tool, straight skew chisel, bent square chisel5-Piece Set ....................................... 283-767 ......$41.99Robert Larson .............. Product # .. PriceSet includes: 2 chisels, 2 gouges, a skew and a "V" tool.6-Piece Regular Handles .......... 181-075 ......$36.996-Piece Palm Handles ................ 631-340 ......$34.99

Barrel Bedding Tool

The Barrel Bedding tool utilizes a series of steel disks separated by rubber washers to scrape away material in the barrel channel. Expert stockmakers also use this tool around the cheekpieces of some stocks to achieve the right shape. The Barrel Bedding Junior is a chatter free system that comes with a quick change disk feature. The single handle tool is complete with pin, retainer and screw for changing and securing the cutter disks. Quick-change disk system includes 6 each of 1/2" disks, 5/8" disks and 3/4" disks. Also includes 15 rubber spacers, 5 for each size of disk. Replacement Cutter Pack includes 6 steel cutter disks and 5 rubber spacers.

Liquid Applicator Brush These 100% natural horsehair brushes are the perfect tools for application of small amounts of lubes, solvents, Heat Control Paste, blue and rust remover, fluxes and other liquid products in the shop. Each brush features a 1/2" wide head, bright metal handle, and is 6" in overall length. Package of 12 brushes.

# 128-578.............................................................................................................................................$5.99

Stock Inletting Stockmaker Guide Screw Hand ScrewDescription ....................................Qty ........$5.49 ...................... $17.296.5x50mm Japanese Arisaka .............................2..............708-722 ................................711-3087.7mm Japanese Arisaka .....................................2..............709-035 ................................717-389Enfi eld ............................................................................2..............707-804 ................................709-517Sako, Howa, S&W 1500, Weatherby Vanguard ..........................................2..............367-510 ................................134-179Mauser 98 ...................................................................2..............123-698 ................................449-539Remington 700, 721, 722, Savage 10, 110, Weatherby Mark 5, Dakota .................2..............421-612 ................................376-910Springfi eld 1903, 1903A3, Krag ......................2..............555-499 ................................531-616Winchester 70..........................................................2..............570-533 ................................560-079

Stockmaker's ScrewsThese screws are used during the inletting process to guide the action into the stock from the top while keeping everything in perfect alignment. Stock inletting guide screws are extra long and headless to make the job easy. T-handled stockmaker hand screws quickly seat the action into the stock without extra tools. Hardened for repeated trial fittings.

Inletting Scraper

Designed for removing small amounts of material during fine inletting. Jerry Fisher scraper is made from heat treated alloy steel. Royal Arms scraper is made from tempered and heated 0-1 tool steel. Easily sharpened with an ordinary bench grinder.Jerry Fisher ..................................................Size ..... Product # .....PriceOctagon (Pictured) ...........................................................1" x 11/16" ......949-428 ..........$13.99Round Small .......................................................................... 5/8" x 1/2" ......616-308 ..........$13.99Round Large ............................................................................1" x 3/4" ........948-324 ..........$13.99Royal Arms ...................................................Size ..... Product # .....PriceRound ............................................................................................0.300" ...........763-112 ..........$12.99Round ............................................................................................0.473" ...........480-581 ..........$12.99Straight ..........................................................................................0.460" ...........130-977 ..........$12.99

Inletting CompoundApply Inletting Compound to the metal components of the rifle and place into the stock. Contact transfers color to the wood, indicating where relief is needed. Works with most wood and light-colored stocks.Description ................. Color ...............Qty ............ Product # .....PriceKokopelli Jerrow's .....................Black ....................... 1/2 oz......................128-834 ............ $9.39Kokopelli Jerrow's .....................Gold ....................... 1/2 oz......................448-136 ..........$14.29Miles Gilbert ................................Black ..........................1 oz ........................123-915 ..........$11.49

Cartridge TrapA cartridge trap adds beauty and value to any gun. This cartridge trap holds four extra rounds inside the stock. Made of high quality steel, furnished in the white and ready for finishing and installation. Stock modification required. Description ............................................................... Product # .....PriceBreak-Open Magnum .....................................................................................761-675 ......$219.99Break-Open Old-Style with Round Cover ........................................890-860 ......$144.99Break-Open Standard (Pictured).............................................................349-163 ......$175.99Flip-Open Standard .........................................................................................928-706 ......$189.99

Lead WeightWeights help a stock achieve the perfect balance, weight and feel. Lead Tape can be placed under the barrel for added forend weight. Washers can be added to the stock bolt for weight at the back.Description ............................................................... Product # .....PriceTape (1/2" x 100") (Pictured) ....................................................................575-426 ..........$12.791/100 oz per 1" of tapeWashers (Package of 12) .............................................................................859-739 ..........$13.297/8" Dia., 0.33 oz each

Barrel Bedding Tool ........Prod # ... Price1/2" .......................................142-923 ... $25.999/16" ....................................116-675 ... $25.995/8" .......................................288-812 ... $25.9911/16" .................................756-854 ... $25.993/4" .......................................191-692 ... $25.997/8" .......................................615-344 ... $30.991" ...........................................130-203 ... $30.99

Replacement Cutter Pack .........Prod # ... Price1/2" .......................................423-368 ......$9.799/16" ....................................489-241 ......$9.795/8" .......................................512-579 ......$9.79

Replacement Cutter Pack .........Prod # ... Price11/16" .................................236-491 ... $11.7911/16" Octagon ............ 123-885 ... $18.493/4" .......................................919-398 ......$9.793/4" Octagon .................. 119-376 ... $18.4913/16" Octagon ............ 978-184 ... $18.497/8" .......................................381-395 ... $11.797/8" Octagon .................. 779-777 ... $18.4915/16" Octagon ............ 480-748 ... $18.491" ...........................................189-064 ... $10.791" Octagon ...................... 287-029 ... $18.491-1/16" Octagon .......... 757-136 ... $18.491-1/8" ..................................134-747 ... $10.791-1/8" Octagon ............. 711-835 ... $18.49

Kit .............................................................................. Product # .....PriceJunior Kit ................................................................................................................263-309 .........$36.99



SandpaperNorton sandpaper can be used for both metal and woodworking applications. The Adalox papers have aggressive aluminum oxide cutting action for all dry sanding applications and are designed for hand or machine sanding. The No-Fil is a wet or dry aluminum oxide paper designed for increased life, consistent finish and reduced loading. Sheets measure 9" x 11".Adalox ..........................................................Qty...... Product # .....Price220 Grit ............................................................................................ 25 ...............496-006 ..........$12.99No-Fil ............................................................Qty...... Product # .....Price400 Grit ............................................................................................ 25 ...............398-754 ..........$17.99

Nicholson

Pattern Maker's Cabinet RaspGet into those tight places for a custom stock fit with the half round shape and narrow pattern edges.Description ............................................... Length ... Product # .....Price#49 Second Cut .........................................................................10" ..............306-776 ..........$41.99#50 Smooth Cut ........................................................................10" ..............687-900 ..........$45.49

Dead Mule Recoil ReducerEasy installation; magazine cap models screw the device on in place of the forend nut. Stock model slips into the bolt hole. Greatly reduces felt recoil for a more comfortable shooting session. Weighs 7 oz. Contains no mercury.Magazine Cap ........................................................... Product # .....PriceBeretta 390 Semi-Automatic Shotguns ...............................................466-914 ..........$63.99Beretta AL-2, 301, 302, 303 Semi-Automatic Shotguns .............971-371 ..........$63.99Stock .......................................................................... Product # .....PricePerazzi, Krieghoff, Winchester 101, Beretta 301, 302 or 303 and other stocks with 7/8" or larger stock bolt holes ..........................................................................138-587 ..........$63.99Some modification required on Krieghoff models, bolt hole may have to be widened

Installation requires 7/8" and 5/8" spur point or forstner style bits. Makes comb fully adjustable; side to side and up and down. Kits include bases, sleeves, set screw, Allen wrenches, comb patterns and instructions.Description ............................................................... Product # .....PriceBrass Hardware .................................................................................................287-325 ..........$68.99Brass Hardware with Brass Plate (Pictured) .....................................283-793 ..........$70.99SS Hardware .......................................................................................................518-576 ..........$70.99

CSP "Seitz-Style" Adjustable Comb

Hardware

WhitingRemoves excess oil from old gunstocks. A traditional method that is extremely effective. 8 oz bottle.

# 185-558.............................................................................................................................................$3.99

Carving and Inletting Chisel Set 12-PieceFeaturing 4" long chrome vanadium steel blades and hardwood handles. This 12-piece set is packaged in a fi tted wooden box. Final honing is recommended before use. # 412-287...........................................................................................................................................$34.99

Trigger Group Bedding BlockPolymer block replaces the trigger group when bedding a barrel, avoiding the need to wrap the trigger group or fill with clay. Coat the block with release agent before bedding to ensure easy removal.

# 562-493...........................................................................................................................................$28.99

For use with the M1 Garand and M1A rifles. Used with your standard bedding tools for single or double stage bedding.Badger Ordnance ..................................................... Product # .....PriceM1 Garand, M1A (A) .....................................................................................579-354 ..........$28.99Baker ......................................................................... Product # .....PriceM1A (B) .................................................................................................................365-927 ..........$38.99

M1 Garand, M1A Bedding

Jig

Bedding and Masking TapeThis black PVC tape is resistant to solvents, oils and other chemicals. At 10-mil (1/4 mm) thick, it's perfect for bedding projects. 100 ft roll.Description ............................................................... Product # .....Price1" Width .................................................................................................................890-229 ............ $9.592" Width .................................................................................................................961-033 ..........$22.49

BA

Barrel Bedding BlockPerfect for bedding rimfire rifles, this block can be used as a stock bolt retainer and recoil lug. Also great for use in single shot rifles as an extra forend recoil lug. Steel.

# 918-534...........................................................................................................................................$12.99

Bald Eagle


STOCK MAKING AND FINISHINGPillar Bedding Columns

A contoured top ring and flat bottom ring adjust on the threaded shaft for a perfect bedding height without the need for machining. Includes a short front pillar and a longer rear pillar. Steel. Columns for the Ruger and Remington models have been precisely machined with the proper angles for a simple bedding job and are aluminum.Callahan..................................................................... Product # .....PriceAdjustable (Pictured) ......................................................................................763-473 ..........$24.99Ruger 77, 77 Mark II ........................................................................................874-663 ..........$12.49Holland's .................................................................... Product # .....PriceRemington 700 ADL.......................................................................................785-324 ..........$34.99Remington 700 BDL .......................................................................................254-662 ..........$36.99

Chisel and Plane Blade Honing Guide

Allows both chisels and plane irons to be held at a constant and steady angle when sharpening. #160-567 ........................................................................$11.29

Fiberglass Stock Scratch FillerScratch filler repairs deep gouges and cuts in most fiberglass stocks. Sandable and paintable when dry. 1.5 oz tube.

# 158-321.............................................................................................................$4.89

Bedrock Glass Bedding KitIdeal for wood, laminated and synthetic stocks. The viscosity of Bedrock can be changed by adding Microballoons, and it is easily dyed to match the color of the stock. The Bedrock Kit contains all the components necessary to bed two rifles: 2 oz resin, 2 oz hardener, release agent with 2 applicators, measuring spoons, mixing cups, brown and black dyes, 4 oz microballoons, 2 feet of surgical tubing, 1 oz of modeling clay and the most comprehensive, illustrated instructions ever offered.Description ............................................................... Product # .....PriceBedding Kit ...........................................................................................................790-049 ..........$26.99Refi lls ............................................................Qty...... Product # .....PriceGlass Bedding Resin ...............................................................16 oz ............310-021 ..........$21.99Glass Bedding Hardener ......................................................16 oz ............778-413 ..........$21.99Miles Gilbert Measuring Cups ............................................100 ..............694-309 ............ $5.99Miles Gilbert Wood Stirring Sticks ..................................100 ..............243-553 ............ $5.99Wheeler Engineering Surgical Tubing ....................................................514-815 ............ $5.9972" total, may be one or more pieces

Bedding StudsThis system is used to keep bedding compound out of the threaded action screw holes and off of the action screws while bedding a stock.Description ............................................................... Product # .....PriceRemington 700 and Weatherby ...............................................................721-785 ..........$24.99Mauser 98 and FN ...........................................................................................521-647 ..........$24.99Winchester Model 70 ....................................................................................914-553 ..........$24.99

Ruger 10/22 Bedding SystemInstalls in the barrel channel in under ten minutes to help tune a rifle's vibrations. Includes aluminum bedding block, thick pressure pad, thin pressure pad and installation drill bit with depth stop.

# 309-374...........................................................................................................................................$25.99

Pre-Lim Surface Cleaner

Perfect for buffing out hand-rubbed oil finishes on gunstocks. Also polishes away powder residue, stains and even surface rust. Easily applied with a soft rag.

# 737-114...........................................................................................................................................$22.99

Pro-Bed 2000 Bedding Kit

Pro-Bed 2000 attains full cure in approximately 16 hours, but remains workable for 60 to 90 minutes depending on room temperature. The high quality components give the cured epoxy greater compressive strength, completely eliminate shrinkage and can be easily carved, ground or machined without softening or chipping. This kit includes a generous amount of mold release agent for the easiest possible bedding. 4 oz 8 oz 16 ozDescription ..............................................$18.99 ......$24.99 .....$39.99Black ......................................................................................... 321-274 ........839-306 ..... 661-230Brown ...................................................................................... 858-006 ........643-447 ..... 238-867

Remington 700 Pillar

Bedding KitThis is a complete kit for pillar bedding most variations of Remington 700 stocks.Description ............................................................. Product # ....PriceDeluxe Kit ...........................................................................................................502-904 .........$59.99Kit includes 2 pillars, installation tools, 2-part epoxy, release agent and CD-ROMRefi ll Kit (Pillars Only) ..................................................................................742-870 .........$24.99

Bedding SuppliesDescription .............................................................Product # .... PriceGlass Bedding Mixing Knives ..................................................................199-766 ............ $5.99Pillar Bedding Drilling Fixture Remington 700 .............................692-054 .......$239.99Pillar Bedding Kit Howa 1500, Weatherby Vanguard ...............780-928 ......... $37.99Pillar Bedding Kit Remington 700 ........................................................337-981 ......... $37.99Release Compound .....................................................................................422-015 ......... $14.99

Lin-Speed Gunstock Finishing OilA favorite of custom stockmakers. Lin-Speed is composed of specially treated and highly refined linseed oil for faster drying, yet still offers that oil finish look. A high gloss or satin finish can be achieved. 2 oz liquid.

# 717-734 ............................................................................................................... $8.99

GB

G U N S M I T H I N GHIGHSC RE



Water-Soluble StainThe superior penetrating properties of Galazan's Wood Stain brings out the beautiful contrasting grain effects notable in gunstocks. 3 oz bottle.Description ............................................................... Product # .....PriceDark Brown .........................................................................................................134-269 ..........$17.99Gold Brown .........................................................................................................387-888 ..........$17.99Light Brown ..........................................................................................................578-212 ..........$17.99Red ............................................................................................................................634-359 ..........$17.99Red Brown............................................................................................................914-697 ..........$17.99

Oil Stock Finishes and StainsThese quality gun and stock finishes are oil based and made to the manufacturer's original specifications. Perfect for refinishing a classic firearm while retaining its original look. 3 oz bottle. Description ............................................................... Product # .....PriceBest Oil Stock Finish .......................................................................................351-013 ..........$17.99French Polish .......................................................................................................815-188 ..........$17.99Parker Brothers Original Stock Finish ...................................................119-450 ..........$17.99

Winchester Pre-64 Stock Finish Kit

Complete kit provides the exact Winchester Pre-64 look. Includes stock filler, stock stain, finish varnish and rubbing compound. Also includes an application cloth, rubbing cloth and complete instructions. Enough for one complete stock.Description ............................................................... Product # .....PriceStock Finish Kit ..................................................................................................160-127 ..........$34.99Components ............................................................. Product # .....PriceWinchester Pre-64 Stock Finish 3 oz Liquid .....................................130-820 ..........$17.99Winchester Pre-64 Stock Stain 3 oz Liquid ......................................381-915 ..........$17.99

Gun Kote Air Cure 1200 SeriesA one part, air-cure finish that offers wear and corrosion protection with a cure time of only 80 minutes. Perfect for scopes, stocks, and other parts that cannot be baked. Cleans up with warm water. Must be applied with an airbrush.

Description ...................4 oz ...............Price ................ 8 oz ..........PriceClear ............................................. 312-717 ...................$11.99 .....................128-251 ..........$19.99Flat Black .................................... 272-313 ...................$11.99 .....................118-499 ..........$19.99Flat Dark Earth ....................... 596-073 ...................$11.99 .....................648-995 ..........$19.99Flat Gray..................................... 227-666 ...................$11.99 .....................917-346 ..........$19.99Flat Olive Drab ...................... 319-256 ...................$11.99 .....................115-501 ..........$19.99Flat Service Brown ............... 676-514 ...................$11.99 .....................345-624 ..........$19.99Flat White .................................. 582-920 ...................$11.99 .....................743-494 ..........$19.99Satin Black ................................. 151-187 ...................$11.99 .....................588-474 ..........$19.99Satin Dark Earth .................... 627-069 ...................$11.99 .....................935-827 ..........$20.99Satin Gray .................................. 684-669 ...................$11.99 .....................315-493 ..........$19.99Satin Olive Drab ................... 963-930 ...................$11.99 .....................794-708 ..........$19.99Satin Red.................................... 542-091 ...................$11.99 .....................130-287 ..........$19.99Satin Service Brown ............ 146-364 ...................$11.99 .....................352-796 ..........$19.99Satin White ............................... 468-880 ...................$11.99 ...................912-744 ..........$19.99

Stock FillerMade from Herter's original formula, this oil based filler and stain brings out the natural beauty of any gunstock wood. 8 oz liquid.Description ............................................................... Product # .....PriceClear .........................................................................................................................771-469 ..........$12.99French Red ...........................................................................................................137-222 ..........$12.99Walnut ....................................................................................................................278-324 ..........$12.99

Art's

Continental-Style Stock and Checkering Oil

Superior waterproof oil finish that is perfect for any number of stock finishing applications. Seals and hardens the wood and has a low sheen, London-type finish.Description ............................................................... Product # .....Price2 oz ...........................................................................................................................981-449 ............ $6.998 oz ...........................................................................................................................232-978 ..........$17.99

Gun Stock WaxForms a protective barrier over the finish of wood. Also used for lubricating wood joints, screws and pins that are inserted into wood. Used as the final step of a custom stock finish.Birchwood Casey .........................................Qty...... Product # .....PriceGun Stock Wax ......................................................................... 3 oz .............626-418 ........... $3.99Dem-Bart .....................................................Qty...... Product # .....PriceWaxylene Wax (Pictured) ................................................... 2 oz .............725-207 ........... $5.99Laurel Mountain ..........................................Qty...... Product # .....PricePermaWax Dark Wax ........................................................... 4 oz .............456-263 ........... $8.49PermaWax Light Wax ............................................................ 4 oz .............910-708 ........... $8.49Renaissance ..................................................Qty...... Product # .....PriceRust Preventative Wax Polish ........................................2-1/4 oz .........541-091 .........$19.99Rust Preventative Wax Polish ............................................ 7 oz .............857-663 .........$29.99Robert Larson ..............................................Qty...... Product # .....PriceBee's Wax ............................................................................... 1 oz Stick .......547-184 ........... $5.09

Tru-Oil Gunstock Finish ProductsThe professional's choice for more than 30 years. This unique blend of linseed and natural oils dries fast, resists water damage and will not cloud, yellow or crack with age. Tru-Oil penetrates deeply and forms a tough, clear, hard finish that protects and enhances the beauty of wood. The finish can be polished to a high gloss or "cut" for a satin finish.Kit .............................................................................. Product # .....PriceFinish Kit .................................................................................................................219-787 ..........$17.99Includes one 2-1/2 oz bottle Walnut stock filler, one 2-1/2 oz bottle Stock Sheen and Conditioner, one 2-1/2 oz bottle Tru-Oil Gun Stock Finish, 4 pieces of Garnet paper, 2 rolls of 2/0 steel wool, 1 piece of non-woven cloth and 1 piece of burlapFiller, Finish and Stain .................................Qty...... Product # .....PriceGun Stock Sealer & Filler ..................................................... 3 oz .............167-857 ............ $3.99Rusty Walnut Wood Stain.................................................... 3 oz .............694-159 ............ $3.99Stock Finish ..................................................................................32 oz ............571-503 ..........$11.99Stock Sheen & Conditioner ................................................ 3 oz .............349-148 ............ $3.99Tru-Oil Finish ............................................................................... 3 oz .............326-934 ............ $6.29Tru-Oil Finish ............................................................................... 8 oz .............152-772 ..........$12.29Tru-Oil Finish Aerosol ...........................................................13 oz ............773-053 ..........$10.49Walnut Wood Stain ................................................................. 3 oz .............374-541 ............ $3.99



Permalyn Stock Finish and Sealer

Formulated to fill the wood grain and quickly build the finish of your stock to the desired gloss. Permalyn Finish is impervious to water, alcohol, bore cleaner and most other chemicals and solvents. Sealer is made from the same base oils and polymers as the Finish, but it contains special ingredients to ensure deep penetration into the wood. This affords the maximum durability and ensures that surface damage cannot expose raw wood.Finish ......................................................................... Product # .....Price4 oz Liquid ............................................................................................................316-694 ..........$11.9932 oz Liquid .........................................................................................................878-434 ..........$28.99Sealer ......................................................................... Product # .....Price4 oz Liquid ............................................................................................................827-063 ............ $9.9932 oz Liquid .........................................................................................................650-485 ..........$27.99

Gun Polish and WashGun wash is perfect for cleaning both metal and wood surfaces. Gun Polish is a fine wax that will give your firearm the shine that it deserves, and is compatible with all types wood and metal. 3 oz.Description .........................................Product # .......PricePolish ..................................................................................... 174-235 ............. $19.49Wash ..................................................................................... 290-793 ............. $19.49

French Red StainClassic French Red color for custom gunstock applications. 8 oz liquid.

# 513-652 .....................................................................................................$16.49

Barrel Laminate and Case Color LacquerCase Color Lacquer gives receivers a protecting finish for case hardened firearms. Gives your firearm a brighter appearance without damaging the case hardening. Damascus Barrel Laminate gives Damascus barrels a silky sheen while simultaneously protecting their appearance from damage from the elements.Description ..............................................Product # ..... PriceCase Color Lacquer .............................................................815-010 ...........$17.99Damascus Barrel Laminate ...............................................389-304 ...........$17.99

Stock Rubbing CompoundThe finest stock finishes are obtained with careful and deliberate attention paid to every detail of the finish application, especially the use of rubbing compounds. Use 2F then 4F Pumice after wet sanding with 600 grit sandpaper, and before the final rubout with Rottenstone.Description ..................................................Qty...... Product # .....Price2F Pumice...................................................................................... 8 oz .............739-647 ............ $9.994F Pumice...................................................................................... 8 oz .............198-441 ............ $9.99Rottenstone ................................................................................. 8 oz .............929-331 ............ $9.99

Powdered Bone BlackWhen mixed with stock finish or utilized as a filler prior to the application of the finish, Bone Black fills the pores and enriches the emergence of the grain pattern, defining its direction and adding contrast. Bone Black is also an excellent coloring agent for epoxy-bedding materials, and can be used to repair or replace inlays of ebony or hard rubber on vintage firearms. 7 oz tub.

# 326-899.............................................................................................................................................$9.99

Antique Wood Stock StainDesigned to penetrate deep into wood so surface scratches, abrasions and other damage will not expose bare wood to the elements. Non-solvent blend will not swell grain checkering, carving or tight inletting.Description ..............................................Capacity . Product # .....PriceAmerican Walnut ...................................................................... 4 oz .............136-368 ..........$13.49Cherry ............................................................................................. 4 oz .............842-044 ..........$12.99Honey Maple............................................................................... 4 oz .............761-298 ..........$11.99Lancaster Maple ......................................................................... 4 oz .............180-278 ..........$12.99Maple ............................................................................................... 4 oz .............138-816 ..........$11.99Nut Brown.................................................................................... 4 oz .............553-157 ..........$12.99Walnut ............................................................................................ 4 oz .............164-665 ..........$13.49Reducer .......................................................................................... 8 oz .............118-727 ..........$15.99

Advanced Stock Refi nishing Kit

Refinishing a Gunstock can be fun, easy and quite satisfying if you choose the right kit. For the beginner, the most important part of the kit is the instructions. The Miles Gilbert Advanced Stock Refinishing Kit includes a professionally made, step-by-step "Refinishing a Gunstock" DVD (which is easily worth the price of the kit). This DVD provides clear, complete instructions that take you step-by step through the refinishing process, beginning with removing the old finish, then sanding, sealing, filling the grain and applying the finish. Supplies in the kit include finish remover, sandpaper (coarse, medium and fine) sealer, grain filler, stain and Miles Gilbert Classic Oil Finish. The Advanced Stock Refinishing Kit will help you refinish your dad's old 22 or your favorite rifle or shotgun, providing a beautiful, tough oil finish in low, medium or high gloss as you desire. Also a great gift idea for dad for Father's Day, birthdays and Christmas.Kit .............................................................................. Product # .....PriceRefi nishing Kit ......................................................................................................115-652 ..........$41.49Accessories ..................................................Qty...... Product # .....PriceFinish Remover ........................................................................... 4 oz .............993-912 ............ $7.99

Before

After

Complete Illustrated

Instructions

Stockmaker's SuppliesDescription ..................................................Qty...... Product # .....PriceMiles Gilbert Measuring Cups ............................................100 ..............694-309 ............ $5.99Disposable 1 oz plastic cups are perfect for measuring and mixing epoxy, bedding compounds, finishes, stains and other materials. Graduated in milliliters, teaspoons/tablespoons and fractions of an ounce.Miles Gilbert Stockmaker's Brush ..................................... 12 ...............262-950 ............ $4.99Brush is 1/2" wide, and the all-natural horsehair bristles are 11/16" longMiles Gilbert Tack Cloth ...........................................................1 .................246-164 ............ $4.99Cloth prepares stock surfaces between coats by removing the smallest particles of saw dust, grit, and other contaminants. Creates a perfectly clean surface and a smooth finish. 8" x 10".Miles Gilbert Wood Stirring Sticks ..................................100 ..............243-553 ............ $5.99This 4-1/2" flat wood stick is great for stirring or scraping thick substances like bedding compound, epoxy, wood fillers and stain so the mess stays off your hands.Pro End Industrial Cleaning Shop Towel ........................ 50 ...............912-434 ............ $7.9912" x 13", package of 50

Stockmaker's Supplies

Art's



Classic Linseed Stock Rubbing OilOil works to restore dull, worn finishes and gives your stock that hand-rubbed finish look. Bag of rottenstone included.Description ...............................Qty...... Product # .....PriceClear ................................................................... 2 oz .............676-211 ..........$22.99Gold and Brown .......................................... 2 oz .............514-618 ..........$22.99Red Brown ...................................................... 2 oz .............150-930 ..........$22.99

Classic Gunstock FinishWorks as both a varnish and an oil finish that fills pores and dries in a hard coat. Use the Gold and Brown to give lighter-colored wood a rich color, while the Red Brown is perfect to match any pre-'64 guns that had the stain in the finish. Finishes come with a detailed instruction booklet.Description ................................Qty...... Product # .....PriceClear .................................................................... 2 oz .............384-884 ..........$22.99Gold Brown .................................................... 2 oz .............671-259 ..........$22.99Red Brown ....................................................... 2 oz .............879-307 ..........$22.99

Classic StainDeep-penetrating stain is available in a variety of rich colors to give your gun a custom look. The non-grain raising formula penetrates most finishes to touch up thin spots.Spirit Stain ..................................Qty...... Product # .....PriceEnglish Red ......................................................... 2 oz .............326-495 ..........$22.99Gold Brown ....................................................... 2 oz .............843-843 ..........$22.99Pre-64 .................................................................... 2 oz .............884-104 ..........$22.99

Pilkington

Cutters

Cutter Spacer Edge Spacer Skip-Line Cutter 60 Degree Cutter

LinesPer Inch

RightHand$4.99

LeftHand$4.99

2-Edge$4.99

3-Edge$5.99

RightHand$5.49

LeftHand$5.49

2-EdgeSpacer$7.19

2-EdgeSpacer

with1 Safe-Edge$8.89

3-EdgeSpacer$8.89

3-Edge Spacer

with Two Safe-Edges$8.89

4-EdgeSpacer$8.89

Skip-Check$9.29

Skip-Check

Dual Edge1 Safe-Edge$9.29

09 - - - - 179-422 463-285 - - - - - - -10 - - - - 312-059 243-903 - - - - - - -11 - - - - 169-969 745-065 - - - - - - -12 - - - - 452-702 514-566 - - - - - - -16 712-826 481-454 221-491 639-142 - - 218-261 159-883 321-717 633-810 - 980-242 122-94718 262-763 437-744 937-024 310-278 - - 892-693 199-054 355-834 136-268 - 230-824 556-89320 795-154 228-862 558-235 735-802 - - 199-774 397-246 977-739 738-908 483-998 787-207 422-40522 298-174 899-085 881-643 640-934 - - 183-440 364-664 857-730 724-098 160-146 291-616 380-58424 769-298 923-244 396-443 157-468 - - 314-354 635-887 663-084 659-124 312-592 461-954 218-10326 - - 845-204 270-921 - - 942-131 531-366 681-996 461-555 752-249 498-835 526-91628 - - 973-006 - - - 486-614 687-265 548-006 580-543 858-493 978-619 379-05432 - - 515-150 - - - 166-429 152-034 551-267 130-162 629-436 199-866 398-354

Cutters and Spacers

I J K L M

A B C D

E F G H

DEM-BARTBorder and Single Line Cutter ............................... Product # .....PriceB-1 Wide Convex Border (A) ..................................................................116-840 ............ $4.99 B-2 Narrow Convex Border (B) .............................................................373-646 ............ $4.99C-1 Single Line Coarse (C) ........................................................................761-994 ............ $4.99 F-1 Single Line Fine (D) ................................................................................743-414 ............ $4.99S-1 Cutter with Handle ........................................... Product # .....PriceS-1 Cutter with Handle.................................................................................196-694 ..........$10.99S-1 Replacement Cutter (E).......................................................................610-372 ............ $3.99 GUNLINEConcave Border Cutter ........................................... Product # .....PriceCutter (F) ..............................................................................................................146-976 ............ $7.69Vex Border Cutter ................................................... Product # .....PriceNarrow (For 20 LPI and Finer) (G) .......................................................869-910 ............ $7.69Wide (For 18 LPI) (H) ..................................................................................115-179 ............ $7.69Extra-Wide (For 16 LPI) (I) ........................................................................961-274 ............ $7.69Cutter Pointer - Long Cut ....................................... Product # .....Price60° Fine (J)............................................................................................................723-941 ............ $7.1960° Medium .........................................................................................................316-258 ............ $7.1990° Fine (K) ..........................................................................................................163-148 ............ $7.1990° Medium .........................................................................................................685-625 ............ $7.19Cutter Pointer - Short Fine Cut ............................. Product # .....Price60° (L) .....................................................................................................................717-773 ............ $5.6990° .............................................................................................................................644-776 ............ $5.69Cutter Pointer - V-Edger .......................................... Product # .....Price60° (M) ...................................................................................................................993-092 ............ $8.6990° .............................................................................................................................381-555 ............ $6.69



Checkering KitsStarter Set includes a fine short single line cutter (S-1), coarse single line cutter (C-1), and a 2-edge spacer tool in the lines per inch specified. Also includes replacement cutters (wide border cutter, fine single line cutter and right hand spacing cutter) as well as a checkering gage. Master Set contains complete tools including a fine short single line cutter (S-1), coarse single line cutter (C-1), fine single line cutter (F-1), 2-edge spacer tool and a right and left hand spacing tool in the lines per inch specified. All tools are complete and replacement cutters are available (sold separately).

Starter Checkering Kit (Pictured) .......................... Product # ....Price 16 Lines per Inch ..............................................................................................325-421 ..........$43.9918 Lines per Inch ..............................................................................................168-386 ..........$43.9920 Lines per Inch ..............................................................................................654-807 ..........$43.9922 Lines per Inch ..............................................................................................161-670 ..........$43.9924 Lines per Inch ..............................................................................................622-938 ..........$43.99Master Checkering Kit ............................................. Product # ....Price 16 Lines per Inch ..............................................................................................836-167 ..........$61.99 18 Lines per Inch ..............................................................................................148-661 ..........$61.99 20 Lines per Inch ..............................................................................................791-939 ..........$61.99 22 Lines per Inch ..............................................................................................461-757 ..........$61.99 24 Lines per Inch ..............................................................................................334-299 ..........$61.99

Handle and ShankHandle fits all Dem-Bart cutters (sold separately) except the short pointer (S-1). Features ergonomic round wooden handle for comfort.

# 854-346.............................................................................................................................................$4.99

Veiner Tool This chisel has a short tool steel blade with palm fitting handle that provides excellent controlled cutting action when held at a steep angle. This tool is perfect for cleaning up to the edges of the pattern as well as producing ornate single line borders.Dem-Bart .................................................................. Product # .....Price60° .............................................................................................................................418-924 ..........$19.9990° .............................................................................................................................813-746 ..........$19.99Gunline ...................................................................... Product # .....Price60° .............................................................................................................................241-130 ..........$18.9990° .............................................................................................................................418-943 ..........$18.99

Checkering KitsThe Leader Kit provides the essential assortment for a beginner. Kit includes: 2-Edge Spacer, Border Vex, V-Edger, Pointer-Long (Fine Cut), Checker Gage Rule, instructions and sample pattern layout. The Premier Kit provides the serious gunstock maker with everything needed to checker even the most complex patterns. Tools required to cut fancy borders such as fleur-de-lis and darts are included. Features both slotted and file type finishing cutters. A Pin Holder for 1/16" spirol pins is included for easy replacement of worn cutters. Kit includes Jointer (60°), 2-Edge Spacer (60°), 3-Edge Spacer (60°), Border Vex, V-Edger (90°), Pointer-Long (Fine Cut, 90°), Veiner Chisel, Checker-Gage Rule, Sample Pattern Layout Designs and Instructions. Leader ....................................................................... Product # ....Price 16 Lines Per Inch ...............................................................................................573-606 ..........$53.99 18 Lines Per Inch ...............................................................................................117-987 ..........$53.99 20 Lines Per Inch ...............................................................................................639-093 ..........$53.99 22 Lines Per Inch ...............................................................................................641-799 ..........$53.99 24 Lines Per Inch ...............................................................................................143-742 ..........$53.99 26 Lines Per Inch ...............................................................................................926-873 ..........$53.99 28 Lines Per Inch ...............................................................................................594-554 ..........$53.99 Premier ..................................................................... Product # ....Price 16 Lines Per Inch (Pictured) .......................................................................110-424 .......$126.99 18 Lines Per Inch ...............................................................................................934-582 .......$126.99 20 Lines Per Inch ...............................................................................................269-088 .......$126.99 22 Lines Per Inch ...............................................................................................225-368 .......$126.99 24 Lines Per Inch ...............................................................................................729-958 .......$126.9926 Lines Per Inch ...............................................................................................478-264 .......$126.99 28 Lines Per Inch ...............................................................................................130-158 .......$126.99

The Leader Kit provides the essential

includes: 2-Edge Spacer, Border Vex,

are included. Features both slotted and file type finishing cutters. A Pin Holder for 1/16" spirol pins is included for easy replacement of worn cutters. Kit includes Jointer (60°), 2-Edge Spacer (60°), 3-Edge Spacer (60°), Border Vex, V-Edger (90°), Pointer-Long (Fine Cut, 90°), Veiner Chisel, Checker-Gage Rule, Sample Pattern

Camp Perry Checkering Kit

Kit includes 6 handles with cutters, 2-Edge Spacer, 3-Edge Spacer, Border-Vex, V-Edger, Pointer Long (fine cut), Veiner Chisel, Checker-Gage Rule. The 3-Edge Spacer cutter is useful for equalizing the checkering rows and the Veiner tool is great for creating fancy borders and tight curving lines. Instructions and sample pattern layout designs included.Description ............................................................... Product # .....Price16 Lines Per Inch ...............................................................................................480-803 ..........$89.9918 Lines Per Inch ...............................................................................................309-615 ..........$89.9920 Lines Per Inch ...............................................................................................718-666 ..........$89.9922 Lines Per Inch ...............................................................................................345-832 ..........$89.9924 Lines Per Inch ...............................................................................................313-304 ..........$89.9926 Lines Per Inch ...............................................................................................412-959 ..........$89.9928 Lines Per Inch ...............................................................................................598-419 ..........$89.99

JointerThis cutter has slotted teeth and is used for accurately laying out critical intersecting master lines. It can also be used for producing the correct angle of 60° and the shallow depth of cut so that the 2 or 3-Edge Spacer tool will fit a groove precisely. The 90° Jointer is useful in sharpening the row base (apex) as the pattern is nearing completion.Description ............................................................... Product # .....Price60° .............................................................................................................................198-541 ..........$25.9990° .............................................................................................................................917-652 ..........$25.99

Pin Holder Tool and Spirol Pins

The Pin Holder Tool allows you to easily remove the spirol pins from your checkering tools. Spirol pins are used to attach checkering cutters to the tool shanks. The 1/16" pin is used for the checkering cutters and the 3/64" pin is used for attaching the pointers.Tool ............................................................................ Product # .....PriceFor 1/16" Pins ......................................................................................................517-277 ............ $9.79For 3/64" Pins ......................................................................................................422-396 ............ $9.79Replacement Pins ........................................Qty...... Product # .....Price1/16" Pins ......................................................................................... 12 ...............799-810 ............ $4.093/64" Pins ......................................................................................... 12 ...............356-114 ............ $2.09

Cutter HandleThe H1 and H2 handle can be used with all cutters except the Pointer cutters. H3 works with the Pointer cutters only.Description ............................................... Handle ... Product # .....PriceOffset Shank See-Thru Style (A) .......................................H1...............565-710 ............ $9.79Straight Shank (B) .......................................................................H2...............697-434 ............ $6.19Sharp Bend for Pointer-Short Cutter (C) ....................H3...............840-602 ............ $6.19

A

B

C



Magnifi er HeadbandPerfect for checkering, inletting, action work, assembly, or any projects requiring close observation. Two magnification levels, 1.8x or 2.3x. Accessory loupe for really close inspection comes standard. Headband includes lights (powered by 4 AAA batteries - not included) and comes with an adjustable padded head strap. Use with or without prescription glasses.

# 540-695...........................................................................................................................................$17.49

Folding Pocket Magnifying Glass

Metal rimmed 3 power glass lens in a leather case. Measures 2-1/2" x 2-1/2" x 3/8" thick.# 635-450 .........................................................................................................................................$23.96

Checkering Layout Guide ScribeUsed to ensure the checkering pattern is parallel to top line of the forend. Features a fully adjustable marking quill to check both top and bottom lines of the pattern.Description ....................................Product # .......PriceDem-Bart ....................................................................351-829 ...............$7.49Gunline (Pictured) ..................................................759-050 ............ $10.79

Checkering Gage and RulerDescription ............................................................... Product # .....PriceGunline (A) ..........................................................................................................320-458 ............ $4.09 Dem-Bart (B) ......................................................................................................647-085 ............ $5.99

Magni-Pak Double Folding Pocket Magnifi er

The lenses in the double lens magnifier can be used alone or in combination to produce the desired magnification. The case can be used as a handle when the magnifier is in use. Magnification range is 3x, 4x or 7x.

# 223-314.............................................................................................................................................$8.49

OptiVISOROptiVISOR is a precision binocular headband magnifier, which leaves both hands free and allows three-dimensional vision. Lenses are optical glass that are ground, polished and mounted in interchangeable plastic frames. The padded leather headband can be worn over eyeglasses. Optional VisorLIGHT clips to head band and provides hands-free illumination, and the OptiLOUPE attaches to the OptiVISOR to provide an additional 2-1/2x magnification (both sold separately).OptiVISOR ................................................................ Product # .....Pricewith 1-1/2x at 20" Lens Plate ....................................................................514-124 ..........$45.99with 1-3/4x at 14" Lens Plate ....................................................................441-379 ..........$45.99with 2x at 10" Lens Plate .............................................................................378-812 ..........$45.99with 2-1/2x at 8" Lens Plate .......................................................................298-305 ..........$45.99with 2-3/4x at 6" Lens Plate .......................................................................915-394 ..........$47.99with 3-1/2x at 4" Lens Plate .......................................................................119-781 ..........$47.99VisorLIGHT .............................................................. Product # .....Pricewith Battery Pack ..............................................................................................213-750 ..........$24.99Replacement Bulb ............................................................................................319-183 ............ $6.19OptiLOUPE .............................................................. Product # .....Price2-1/2x Monocular .............................................................................................717-428 ..........$10.99Lens Plate .................................................................. Product # .....Price1-1/2x at 20"........................................................................................................985-256 ..........$27.491-3/4x at 14"........................................................................................................947-092 ..........$28.492x at 10".................................................................................................................214-564 ..........$28.492-1/2x at 8" ..........................................................................................................883-124 ..........$28.493-1/2x at 4" ..........................................................................................................220-329 ..........$29.49

Flip-Up Clip-On

Binocular Magnifi er

Clip-On Magnifier easily clips onto most eyeglass frames or can be used with comfortable binocular frame. Easily flips up for normal viewing and down when magnification is preferred. Features a dual lens system that is designed to ease eyestrain.Description ............................................................... Product # .....Price1-3/4x at 14"........................................................................................................365-716 ..........$28.992x at 10".................................................................................................................764-538 ..........$27.99

Eyeglass LoupeLoupe provides magnification for visual accuracy. Perfect for checkering, miniature assembly and inspection. Loupes easily attach to the temple of eyeglass frames and are completely adjustable to individual use. Includes 3x and 5x lenses.

# 218-005...........................................................................................................................................$26.99

A B

clips onto most eyeglass frames

Donegan Optical

Marking GageMarking gage features a 6" nickel-plated adjustable bar marked in 1/16" graduations. Die-cast head with replaceable needlepoint marker.# 965-262...........................................................................................................................................$12.49

Flexible RuleRule features a lead core wrapped in vinyl. No measurement marks are included. 24" long.

# 624-359....................................................................... $22.49

Documents

STOCK MAKING AND FINISHING - media.midwayusa.com · STOCK MAKING AND FINISHING Socket Head Stock Bolt Assembly This kit makes stock removal easy, even without removing the recoil