Embed Size (px)
Citation preview
STANDARD PRODUCT OF STRAINERS & MACHINERY
G-MEC KOREA Co., Ltd.
Fabricated Strainers
T Type Strainers
Y Type Strainers
H Type Strainers
Conical Type Strainers
Machinery
Separator
Pressure Vessel
Automated Self-Cleaning Strainers
2
Mission Statement
G-MEC is committed to providing our customers with the highest quality technicalpublications and services. Our goal is to develop strategic alliances with our customers.We do so by holding ourselves to the highest level of integrity, honesty, and openness. Indoing so, we will ensure that our products continually evolve with our customer’s needs,and that we exceed their expectations. At G-MEC, we believe that customer satisfactionbegins with each member of the G-MEC family. We foster professionalism in a familyatmosphere, striving to continuously improve our products and ourselves.
04
05
06
07
08
09
10
11
12
13
14
15
16
16
G-MEC Series Temporary Strainers
G-MEC Series C1 and C2 Temporary Strainers
G-MEC Series C1 and C2 Dimensional Data
G-MEC Series Y-TYPE Strainers
G-MEC Series Y150 Y – Strainers
G-MEC Series Y150 Dimensional Data
G-MEC Series T-TYPE Strainers
G-MEC Series T150, T300 and T600 T-Strainers
G-MEC Series T150 Dimensional Data
G-MEC Series T300 Dimensional Data
G-MEC Series BASKET-TYPE Strainers
G-MEC Series B150, B300 and B600 B-Strainers
G-MEC Series B150 Dimensional Data
G-MEC Series B300 Dimensional Data
G-MEC Series Automated Self-Cleaning Strainers
G-MEC Series Automated Self-Cleaning Strainers
G-MEC Series H-TYPE Strainers
G-MEC Series H Strainers
Machinery
Contact Point
CONTENTS
G-M
EC
KO
RE
A C
o., L
td.
3
Material 150# 300# 600#
CS / LTCS STD SCH.40 SCH.80
Stainless Steel SCH.10S SCH.10S SCH.40S
A – Body Thickness (Schedule)
MANUFACTURE STANDARD
B - Paint (Details to be discussed)
Material Paint Material Color DFT Temperature
CS / LTCS㎛ Polyester Epoxy Resin Light Gray 75 ㎛ Up to 200 ℃
CS ㎛ Silicone Aluminum ㎛ Silver ㎛ 50 ㎛ 200 ℃ and Over
For Standard products, three (3) weeks after P.O.
Delivery condition to be adjusted at the detail discussion.
AVAILABLE MATERIAL
OF CONSTRUCTION
• Carbon Steel / LTCS
• Stainless Steel
• Super Duplex Stainless Steel
• Alloy / Alloy20 / Alloy 825
• Titanium
• Monel
• Al-Bronze
DELIVERY
4
Design Features :
• Standard Size from 2” to 24”
• Primarily used for new pipeline start-up
or where solid loading is minimal
• Filtration down to 40 Microns available
• Available in conical and basket
configurations
• May be installed in horizontal or vertical
pipelines
• 304SS construction is standard.
• 100% to 300% open area range as standard
• Size and Pressure Rating are stamped on
handle
G-MEC SERIES TEMPORARY STRAINERS
G-MEC Series C1 and C2
Temporary Strainers
Option :
• Specify the flow direction if mesh lined
strainer required.
• Customer specified open area
• RF and/or RTJ connections
• Other materials, sizes and/or configurations
• Other screen and/or Mesh
• Spacer Ring
• Please specify if handles are to be stamped
with tag numbers when ordering
• Lager than 24”, to be fabricated under
Client’s request
Materials of Construction
Part Carbon Steel Stainless Steel
Ring A36 A240-304
Handle A36 A240-304
Perforated Plate A36 A240-304
Mesh (Optional) A276-304 A276-304
Standard Construction Details
No Mesh Mesh Lined
G-M
EC
KO
RE
A C
o., L
td.
5
G-MEC Series C1 and C2 Dimensional Data
G-MEC SERIES TEMPORARY STRAINERS
Size
in
(mm)
Screen OpeningsSize Standard Screen
3/4" - 8" 1/8" Perf.
10" - 24" 1/2" Perf.
(13.6)
(0.5)
1.0
(0.5)
2.0
(0.9)
Weight
Lbs
(kg)
0.5
(0.2)
0.5
(0.2)
0.5
(0.2)
0.5
(0.2)
1.0
16.0
(7.3)
20.0
12.0
(5.4)
3.0
(1.4)
5.0
(2.3)
7.0
(11.8)
30.0
2.0
(0.9)
0.13
(3)
(3)
0.13
(3)
0.13
(3)
0.13
(3)
0.13
(3)
0.13
(3)
0.13
(3)
0.13
(3)
(9.1)
26.0
(3.2)
11.0
(5.0)
0.13
(3)
0.13
(3)
0.13
(3)
0.13
(3)
0.13
(3)
0.13
(3)
0.13
(3)
0.13
F
in
(mm)
0.13
(3)
8.75
(222)
10.63
(270)
E
in
(mm)
(156)
7.00
(178)
7.88
(200)
4.69
(119)
5.50
(140)
6.13
(59)
2.69
(68)
3.69
(94)
1.38
(35)
1.88
(48)
2.31
(16)
0.88
(22)
1.13
(29)
0.31
(8)
0.38
(10)
0.63
21.00 32.00 42.00 64.00
(533) (813) (1067) (1626)
17.00 27.00 35.00 53.00
(432) (686) (889) (1346)
16.00 24.00 32.00 47.00
(406) (610) (813) (1194)
14.00 21.00 28.00 42.00
(356) (533) (711) (1067)
11.50 18.00 24.00 36.00
(292) (457) (610) (914)
10.50 17.00 22.00 33.00
(267) (432) (559) (838)
8.63 14.00 18.00 27.00
(219) (356) (457) (586)
7.00 10.69 15.00 22.00
(178) (272) (381) (559)
5.50 8.50 11.37 17.00
(140) (216) (289) (432)
4.50 6.75 9.13 14.00
(114) (171) (232) (356)
3.50 5.32 7.19 11.00
(89) (135) (183) (279)
2.75 4.25 5.69 8.50
(70) (108) (145) (216)
2.19 3.37 4.50 6.75
(56) (86) (114) (171)
2.00 3.00 4.00 6.00
(51) (76) (102) (152)
1.50 2.25 3.00 4.50
(38) (57) (76) (114)
1.13 1.69 2.25 3.38
(29) (43) (57) (86)
D (Bsket Length)
in
(mm)
100% 150% 200% 300%
0.75 1.13 1.50 2.25
(19) (29) (38) (57)
95.00
(1600) (2413)
C (Cone Length)
in
(mm)
(1803)
53.00 79.00
(1346) (2007)
62.00
(1041) (1575)
47.00 71.00
(1245)
36.00 54.00
(914) (1372)
40.00
(686) (1016)
33.00 49.00
(660)
22.00 33.00
(559) (838)
21.00
(356) (533)
17.00 26.00
(324)
10.63 17.00
(270) (432)
10.13
(170) (257)
8.50 12.75
(171)
6.00 9.13
(152) (232)
5.00
(84) (127)
4.50 6.75
300%
2.25 3.38
(57) (86)
30.00 47.00
(762) (1194)
200%
3.31
(114)
6.69
(216)
14.00
(432)
27.00
(838)
41.00
(1194)
63.00
(584) (889)
25.00 39.00
(635) (991)
20.00 31.00
(508) (787)
23.00 35.00
(406) (610)
17.00 27.00
(432) (686)
13.00 20.00
(330) (508)
16.00 24.00
(207) (330)
10.19 16.00
(259) (406)
6.50 10.13
(165) (257)
8.13 13.00
(102) (159)
5.13 7.88
(130) (200)
3.19 5.00
(81) (127)
4.00 6.25
(56) (86)
3.00 4.50
(76) (114)
1.63 2.50
(41) (64)
2.19 3.38
100% 150%
1.13 1.68
(29) (43)
(445)
21.25
(540)
150/300#
B (I.D)
in
(mm)
14.00
(356)
15.75
(400)
17.50
(238)
11.00
(279)
12.25
(311)
5.38
(137)
7.38
(187)
9.38
(70)
3.75
(95)
4.63
(117)
(899)
A (O.D)
in
(mm)
0.63
(16)
0.75
(19)
1.25
(32)
1.75
(44)
2.25
(57)
2.75
27.63
(702)
29.63
(753)
35.38
(517)
22.62
(575)
25.13
(638)
13.75
(349)
17.00
(432)
20.37
(206)
9.88
(251)
11.00
(279)
(635)
27.38
1500#
2.63
(67)
3.00
(76)
3.75
(95)
5.50
(140)
6.38
(162)
6.75
(171)
8.13
20.37
(517)
22.50
(572)
25.00
(356)
17.00
(432)
19.50
(495)
9.63
(244)
11.25
(286)
14.00
900#
2.63
(67)
3.00
(76)
3.75
(95)
5.50
(140)
6.38
(162)
6.50
(165)
8.00
(203)
(676)
30.87
(784)
(695)
32.88
(835)
21.87
(555)
23.75
(603)
26.62
(397)
17.87
(454)
19.00
(483)
10.37
(263)
12.50
(318)
15.63
(146)
7.50
(191)
9.38
(238)
23.50
5.00
(127)
5.75
(171)
7.63
2.13
(54)
2.50
(64)
3.25
(83)
4.00
(102)
4.75
(121)
5.25
(133)
6.75
600#
2.50
(64)
2.75
(70)
3.63
(92)
4.25
(108)
24"
(600)
16"
(400)
18"
(450)
20"
(500)
(100)
12"
(300)
14"
(350)
5"
(125)
6"
(150)
8"
(200)
10"
(250)
2-1/2"
(65)
3"
(80)
4"
(25)
1"
(20)
3/4"
(50)
2"
(40)
1-1/2"
(708)
(194)
8.63
(219)
10.87
(276)
13.25
(337)
16.00
(406)
17.37
(441)
20.12
(511)
21.25
(540)
(597)
27.87
Dimensional Date
6
G-MEC SERIES Y-TYPE STRAINERS
G-MEC Series Y150 Y - Strainers
Design Features :
• Standard Size from 2” to 24”
• RF or RTJ Flanges or Butt weld end
connections in accordance with ASME
B16.5, B16.47 Class 150LB~3000LB and
B16.9
• Standard thru bolt cover design
• Horizontal or vertical installation
• Stainless steel perforated screen are
standard
• Drain connection furnished with plugOptions :
• Other materials, size and/or configurations
• Other screen, mesh or wedge wire
• Other drain/vent connections
(ex. Valve, Flange, etc.)
• Lager than 24”, to be fabricated under
Client’ s request
Applicable Codes :
• Designed/Manufactured to meet ASME
B31.1 or ASME B31.3
Part Carbon Steel Low Temp. Carbon SteelShell & Nozzle A106-B A333-6
Reinforcement Pads A516-60 A516-60
Flanges A105 A350-LF2
Coupling A105 A350-LF2
Plug A105 A350-LF2
Coupling A105 A350-LF2
Screen Retainer Ring A516-60 A516-60
Gasket 304 SS Spiral Wound 304 SS Spiral Wound
Stud bolt A193-B7 A193-B7
Nut A194-2H A194-2H
Screen 304 SS 304 SS
Part Stainless Steel (304 SS) Stainless Steel (316 SS)Shell & Nozzle A312-TP304 A312-TP316
Reinforcement Pads A240-304 A240-316
Flanges A182-F304 A182-F316
Coupling A182-F304 A182-F316
Plug A182-F304 A182-F316
Coupling A182-F304 A182-F316
Screen Retainer Ring A240-TP304 A240-TP316
Gasket 304 SS Spiral Wound 316 SS Spiral Wound
Stud bolt A193-B8 A193-B8
Nut A194-8 A194-8
Screen 304 SS 316 SS
Materials of Construction
G-M
EC
KO
RE
A C
o., L
td.
7
G-MEC Series Y150 Dimensional Data
Size A B C D Approx. Weights Lbs (kg)
in in in in in Unit
(mm) (mm) (mm) (mm) (mm)
2-1/2"
(65)
Screen OpeningsSize Standard Screen
2" - 12" 1/8" Perf.
14" - 24" 1/2" Perf.
85
(39)
Cover Unit
13.38
(340)
10.25
(260)
16.44
(418)
1.00
(25)
26
(12)
(425)
16.75
(418)
16.44
(1010)
39.75
(832)
32.75
(800)
31.50
(610)
24.00
(559)
22.00
(318)
12.50
(267)
10.50
(260)
10.25
(559)
22.00
(451)
17.75
(356)
14.00
2"
(50)
3"
(80)
4"
(100)
12"
(300)
14"
(350)
5"
(125)
6"
(150)
8"
(200)
24"
(600)
10.81
(275)
13.38
(340)
14.75
(375)
17.25
(438)
16"
(400)
18"
(450)
20"
(500)
10"
(250)
48.50
(1232)
53.75
(1365)
64.00
(1626)
45.25
(1149)
(991)
44.00
(1118)
25.00
(635)
27.00
(686)
30.88
(784)
39.00
(861)
33.88
13.25
(337)
8.25
(210)
(1016)
43.25
(1099)
20.00
(508)
22.44
(570)
28.44
(722)
40.00
2.00
(50)
2.00
(50)
2.00
(50)
70.50
(1791)
0.50
(14)
1.00
(25)
1.50
(40)
1.50
(40)
49.50
(1257)
54.25
(1378)
62.50
(1588)
35.25
(895)
2.00
(50)
2.00
(50)
2.00
(50)
2.00
(50)
2.00
(50)
2.00
(50)
(50)
110
(20)
45
(20)
45
430
(195)
430
Dimensional Data
(195)
(100)
220
(82)
180
(129)
285
1540
(698)
26
(12)
4500
(2039)
650
(294)
1205
(546)
1600
(725)
85
(39)
140
(63)
145
(66)
965
(437)
70
3200
(1450)
(32)
70
(32) (93)
205
(72)
160
(997)
2200
(890)
1965
(190)
420
G-MEC SERIES Y-TYPE STRAINERS
8
G-MEC SERIES T-TYPE STRAINERS
G-MEC Series T150, T300 and T600
T Strainers
Option :
• Other materials, size and/or configurations
• Other screen, mesh or wedge wire
• Other covers (ex. Quick Opening covers)
• Other drain/vent connections
(ex. Valve, Flange, etc.)
• Lager than 24”, to be fabricated under
Client’s request
Applicable Codes :
• Designed / Manufactured to meet ASME
B31.1 or ASME B31.3
Part Carbon Steel Low Temp. Carbon SteelBody A234-WPB A420-WPL6
Flanges A105 A350-LF2
Screen 304 SS 304 SS
Internal support ribs Carbon Steel 304 SS
Coupling A105 A350-LF2
Plug A105 A350-LF2
Gasket 304 SS Spiral Wound 304 SS Spiral Wound
Stud bolt A193-B7 A193-B7
Nut A194-2H A194-2H
Part Stainless Steel (304 SS) Stainless Steel (316 SS)Body A403-WP304 A403-WP316
Flanges A182-F304 A182-F316
Screen 304 SS 316 SS
Internal support ribs 304 SS 316 SS
Coupling A182-F304 A182-F316
Plug A182-F304 A182-F316
Gasket 304 SS Spiral Wound 316 SS Spiral Wound
Stud bolt A193-B8 A193-B8
Materials of Construction
Nut A194-8 A194-8
Design Features :
• Standard Size from 2” to 24”
• RF or RTJ Flanges or Butt weld end
connections in accordance with ASME
B16.5, B16.47 Class 150LB~3000LB and B16.9
• Standard thru bolt cover design
• Horizontal or vertical installation
• Three flow configurations available
• Stainless steel perforated screen are
standard
• Vent / Drain connection furnished with plug
• Cover lifting lug standard on weight 30kg
and heavier
G-M
EC
KO
RE
A C
o., L
td.
9
G-MEC Series T150 Dimensional Data
TYPE : T1
FLOW : STRIGHT FLOW : TOP TO SIDE FLOW : SIDE TO TOP
TYPE : T2 TYPE : T3
Size A B C D E
in in in in in in Unit
(mm) (mm) (mm) (mm) (mm) (mm) Cover Flanged Buttweld
Size Standard Screen2" - 12" 1/8" Perf.
14" - 24" 1/2" Perf.
1350
(613)
105
180
(82)
220
(100)
990
(449)
(48)
140
(64)
1580
(717)
Approx. Weights Lbs (kg)
221
(100)
340
(154)
490
(222)
16
(7)
32
(15)
49
(22)
860
(390)
1025
26
(12)
5
(2)
9
(4)
28
(13)
52
(24)
580
(263)
725
(329)
67
(30)
92
(42)
325
(148)
500
(227)
230
(104)
(465)
2100
(953)
152
(69)
710
(322)
79
(36)
430
(195)
110
(50)
140
(64)
45
(20)
70
(32)
285
(129)
17
(8)
20
(9)
63.00
(1600)
46.00
(1168)
51.50
(1308)
56.38
(1432)
33.50
(851)
39.00
(991)
43.00
(1092)
21.63
(549)
23.68
(606)
29.00
(737)
12.50
(318)
15.25
(387)
18.38
(467)
47.00
(1194)
51.38
(1305)
58.00
(1473)
35.00
(889)
39.00
(991)
42.00
(1067)
21.25
(540)
26.00
(660)
30.00
(762)
24.88
(632)
11.00
(279)
13.75
(349)
16.25
(413)
19.25
(489)
18.44
(468)
20.56
(522)
22.38
(568)
13.69
(348)
(400)
17.38
(441)
9.31
(237)
10.13
(257)
12.13
(308)
Dimensional Data
Screen Openings
5.75
(146)
7.06
(179)
8.06
(205)
27.00
(686)
30.00
11.25
(286)
14.00
(356)
17.00
(432)
5.00
(127)
6.75
(172)
8.25
(210)
9.75
(248)
15.75
34.00
(864)
(762)
34.00
(864)
20.00
(508)
22.00
(559)
24.00
(610)
24"
(600)
10.00
(254)
12.25
(311)
14.25
(362)
16.75
(425)
16"
(400)
18"
(450)
20"
(500)
10"
(250)
38.00
(965)
41.36
(1051)
46.00
(1168)
(350)
5"
(125)
6"
(150)
8"
(200)
18.25
(464)
22.00
(559)
25.00
(635)
29.00
(737)
32.00
(813)
2"
(50)
3"
(80)
4"
(100)
12"
(300)
14"
→ → ←
↓
→
↑
G-MEC SERIES T-TYPE STRAINERS
10
G-MEC Series T300 Dimensional Data
Size A B C D E
in in in in in in Unit
(mm) (mm) (mm) (mm) (mm) (mm) Cover Flanged Buttweld
Size Standard Screen
2" - 12" 1/8" Perf.
14" - 24" 1/2" Perf.
2250
(1022)
160
295
(134)
395
(179)
1450
(658)
(73)
225
(102)
2240
(1017)
Approx. Weights Lbs (kg)
313
(142)
485
(220)
665
(302)
24
(11)
42
(19)
75
(34)
1320
(599)
1700
50
(23)
8
(4)
16
(7)
42
(19)
72
(33)
820
(372)
1060
(481)
96
(44)
141
(62)
495
(225)
765
(347)
350
(159)
(772)
2340
(1544)
216
(98)
1025
(465)
125
(57)
790
(359)
185
(84)
250
(114)
81
(37)
124
(56)
505
(229)
27
(12)
35
(16)
64.25
(1632)
47.50
(1207)
53.00
(1346)
47.75
(1213)
34.75
(883)
40.25
(1022)
44.25
(1124)
22.38
(568)
24.63
(625)
29.75
(756)
13.00
(330)
16.00
(406)
19.13
(486)
48.50
(1232)
42.75
(1086)
59.25
(1505)
36.25
(921)
40.25
(1022)
43.50
(11)
22.00
(559)
26.75
(679)
31.25
(794)
26.38
(670)
11.50
(292)
14.50
(368)
17.00
(432)
20.00
(508)
20.00
(508)
22.13
(562)
23.88
(606)
15.00
(381)
(435)
18.75
(476)
10.13
(257)
10.94
(278)
13.00
(330)
6.13
(156)
7.63
(194)
8.75
(222)
27.00
(686)
30.00
11.25
(286)
14.00
(356)
17.00
(432)
5.00
(127)
6.75
(172)
8.25
(210)
9.75
(248)
17.13
35.50
(902)
(762)
34.00
(864)
20.00
(508)
22.00
(559)
24.00
(610)
24"
(600)
10.50
(267)
13.00
(330)
15.00
(381)
17.50
(445)
16"
(400)
18"
(450)
20"
(500)
10"
(250)
39.50
(1003)
32.75
(832)
47.25
(1200)
(350)
5"
(125)
6"
(150)
8"
(200)
19.00
(483)
22.75
(578)
26.25
(667)
30.25
(768)
33.25
(845)
2"
(50)
3"
(80)
4"
(100)
12"
(300)
14"
Dimensional Data
Screen Openings
G-MEC SERIES T-TYPE STRAINERS
TYPE : T1
FLOW : STRIGHT FLOW : TOP TO SIDE FLOW : SIDE TO TOP
TYPE : T2 TYPE : T3
→ → ←
↓
→
↑
G-M
EC
KO
RE
A C
o., L
td.
11
G-MEC SERIES B-TYPE STRAINERS
G-MEC Series T150, T300 and T600
Basket Strainers Design Features :
• Standard Size from 2” to 24”
• RF or RTJ Flanges or Butt weld end
connections in accordance with ASME
B16.5, B16.47 Class 150LB~3000LB and
B16.9
• Stainless steel perforated screen are
standard
• Vent / Drain connection furnished with
plug
• Cover lifting lug standard on weight
30kg and heavier
Options :
• Other materials, size and/or configurations
• Other screen, mesh or wedge wire
• Other covers (ex. Quick Opening covers)
• Other drain/vent connections
• (ex. Valve, Flange, etc.)
• Lager than 24”, to be fabricated under
Client’s request
Applicable Codes :
• Designed/Manufactured to meet
ASME B31.1 , ASME B31.3 and/or
ASME Sec. VIII Div.1
Part Carbon Steel Low Temp. Carbon SteelShell A106-B A333-6
Nozzle A106-B A333-6
Reinforcement Pads A516-60 A516-60
Flanges A105 A350-LF2
Heads A234-WPB/A516-60 A420-WPL6
Coupling A105 A350-LF2
Plug A105 A350-LF2
Gasket 304 SS Spiral Wound 304 SS Spiral Wound
Stud bolt A193-B7 A193-B7
Nut A194-2H A194-2H
Basket 304 SS 304 SS
Part Stainless Steel (304 SS) Stainless Steel (316 SS)Shell A312-TP304 A312-TP316
Nozzle A312-TP304 A312-TP316
Reinforcement Pads A240-304 A240-316
Flanges A182-F304 A182-F316
Heads A403-WP304 A403-WP316
Coupling A182-F304 A182-F316
Plug A182-F304 A182-F316
Gasket 304 SS Spiral Wound 316 SS Spiral Wound
Stud bolt A193-B8 A193-B8
Nut A194-8 A194-8
Basket 304 SS 316 SS
Materials of Construction
12
G-MEC Series B150 Dimensional Data
Size A B C D E F
in in in in in in in
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Cover Unit
Size Standard Screen2" - 12" 1/8" Perf.
14" - 24" 1/2" Perf.
2.00
(50)
2.00
(50)
Approx. Weights
Lbs (kg)
(40)
1.50
(40)
1.50
(40)
2.00
(50)
2.00
(50)
0.50
(15)
0.75
(20)
1.00
(25)
1.00
(25)
1.50
3200
(1450)
160
430
(195)
430
(195)
(72)
205
(93)
1965
(890)
2200
70
(32)
(294)
1205
(546)
(997)
2.00
(50)
2.00
(50)
26
(12)
45
(20)
85
(39)
140
(63)
650
420
(190)
4500
(2039)
1600
(725)
145
(66)
1540
(698)
220
(100)
285
(129)
110
(50)
180
(82)
965
(437)
45
(20)
70
(32)
110.50
(2807)
72.50
(1842)
80.00
(2032)
90.00
(2286)
58.00
(1473)
61.50
(1562)
64.50
(1638)
30.50
(775)
36.00
(914)
43.00
(1092)
25.00
(635)
28.50
(724)
30.50
(775)
24.00
(610)
30.00
(762)
36.00
(914)
18.00
(457)
20.00
(508)
24.00
(610)
10.75
(273)
12.75
(324)
16.00
(406)
55.00
(1397)
6.63
(168)
8.63
(219)
8.63
(219)
10.75
(273)
36.00
(914)
40.00
(1016)
46.00
(1168)
25.00
(635)
(711)
33.00
(838)
17.00
(432)
17.00
(432)
Dimensional Data
Screen Openings
21.00
(533)
11.13
(283)
12.50
(318)
14.00
(356)
60.00
(1524)
68.00
26.50
(673)
32.00
(813)
41.50
(1054)
18.63
(473)
20.50
(521)
22.25
(565)
24.25
(616)
28.00
42.00
(1067)
(1727)
82.75
(2102)
44.75
(1137)
48.75
(1238)
54.25
(1378)
24"
(600)
12.75
(324)
14.00
(356)
16.00
(406)
18.00
(457)
16"
(400)
18"
(450)
20"
(500)
10"
(250)
46.50
(1181)
52.00
(1321)
64.00
(1626)
(350)
5"
(125)
6"
(150)
8"
(200)
20.00
(508)
22.00
(559)
32.00
(813)
35.00
(889)
37.00
(940)
2"
(50)
3"
(80)
4"
(100)
12"
(300)
14"
G-MEC SERIES B-TYPE STRAINERS
G-M
EC
KO
RE
A C
o., L
td.
13
G-MEC Series B300 Dimensional Data
Size A B C D E F
in in in in in in in
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Cover Unit
Screen OpeningsSize Standard Screen
2" - 12" 1/8" Perf.
14" - 16" 1/2" Perf.
Approx. Weights
Lbs (kg)
(25)
1.50
(40)
1.50
(40)
1.50
(40)
2.00
400
(218)
81
(37)
125
(57)
0.50
(15)
0.75
(20)
1.00
(25)
1.00
(25)
1.00
50
(23)
81
(37)
195
(89)
250
(114)
1100
681
(310)
300
(136)
185
(182)
480125
(57)
(84)
29557.25
(1454)
65.12
(1654)
72.00
(1829)
2600
(1182)
395
(179)
505
(229)
2750
(1250)
(500)
1650
(750)
(134)
790
(358)
(50)
38.88
(987)
42.38
(1076)
55.75
(1416)
2.00
(50)
81.13
(2061)
28.00
(711)
34.25
(870)
36.13
(918)
38.88
(988)
27.25
(692)
6.63
(168)
8.63
(219)
8.63
(219)
10.75
(273)
18.00
(457)
20.00
(508)
24.00
(610)
10.75
(273)
12.75
(324)
16.00
(406)
33.00
(838)
17.13
(435)
19.13
(486)
22.00
(559)
47.75
(1213)
52.50
(1334)
60.00
(1524)
12.00
(305)
15.75
(400)
15.88
(403)
30.75
(781)
35.50
(902)
42.50
(1080)
20.00
(508)
25.00
(635)
26.00
(660)
28.00
(711)
30.38
(772)
16"
(400)
10"
(250)
47.50
(1207)
24.88
(632)
35.38
(899)
39.38
(1000)
41.50
(1054)
14.88
(378)
16.50
(419)
18.63
(473)
20.25
(514)
2"
(50)
3"
(80)
4"
(100)
12"
(300)
14"
(350)
5"
(125)
6"
(150)
8"
(200)
24.50
(622)
Dimensional Data
G-MEC SERIES B-TYPE STRAINERS
14
G-MEC SERIES AUTOMATED SELF-CLEANING STRAINERS
G-MEC Series Automated
Self - Cleaning Strainers
Design Features :
• Filter grade available for screen
• Vertical Type or Horizontal Type available
• Operation : Mechanical cleaning or Backwash
• Standard Size from 2” to 24”
• RF or RTJ Flanges or Butt weld end connections
in accordance with ASME B16.5, B16.47 Class
150LB~3000LB and B16.9
• Stainless steel screen are standard
• Vent / Drain connection furnished with plug or
others
• Cover lifting lug standard on weight 30kg and
heavier
Options :
• Other materials, size and/or configurations
• Other screen, wedge wire screen
• Other covers (ex. Quick Opening covers)
• Other drain/vent connections
(ex. Valve, Flange, etc.)
• Lager than 24”, to be fabricated under
Client’s request
Applicable Codes :
• Designed/Manufactured to meet ASME B3
1.1, ASME B31.3 and/or ASME Sec. VIII Div.1
G-MEC‘s Automatic Self Cleaning Filters
can provide easy maintenance and
satisfactory operations. The self cleaning p
roduct includes backwashing or mechanic
ally cleaned system. G-MEC's self cleanin
g strainer is available in custom designs a
nd various materials upon request.
Automatic strainers can replace duplex
basket strainers.
Part List
NO NAME OF PART DESCRIPTION
1 BODYC.S / S.S / LTCS /ALLOY STEEL / TITANIUM
2 GEARED MOTOR -
3 SCREEN WEDGE WIRE SCREEN
4P/G CONNECTOR
C.S / S.S / LTCS /ALLOY STEEL / TITANIUM
5BACK WASH OUTLET
C.S / S.S / LTCS /ALLOY STEEL / TITANIUM
6 DRAINC.S / S.S / LTCS /ALLOY STEEL / TITANIUM
7 VENTC.S / S.S / LTCS /ALLOY STEEL / TITANIUM
- CONTROL PANEL -
G-M
EC
KO
RE
A C
o., L
td.
15
G-MEC SERIES H-TYPE STRAINERS
G-MEC Series H Strainers
G-MEC‘s H type strainer can provide
easy maintenance. The H type strainer is
available in custom designs and various
materials upon request.
H type strainers can replace Cone type
(temporary strainer) strainers.
Design Features :
• Standard Size from 2” to 24”
• RF or RTJ Flanges or Butt weld end
connections in accordance with ASME
B16.5 Class 150LB and B16.9
• Quick opening type cover design
• Horizontal or vertical installation
• Straight flow configurations available
• Stainless steel perforated screen are
standard
• Vent/Drain connection furnished with plug
• Cover lifting lug standard on weight 30kg
and heavier
Part List
NO NAME OF PART DESCRIPTION
1 BODY C.S / S.S / LTCS / ALLOY STEEL / TITANIUM
2 END PLATE C.S / S.S / LTCS / ALLOY STEEL / TITANIUM
3 FLANGE C.S / S.S / LTCS / ALLOY STEEL / TITANIUM
4 NOZZLE NECK C.S / S.S / LTCS / ALLOY STEEL / TITANIUM
5 SUPPORT RIB C.S / S.S / LTCS / ALLOY STEEL / TITANIUM
6 FLANGE C.S / S.S / LTCS / ALLOY STEEL / TITANIUM
7 BLIND FLANGE C.S / S.S / LTCS / ALLOY STEEL / TITANIUM
8 GASKET PTFE / O-RING
11 INTERNAL SUPPORT S.S
10 RETAINER S.S
Option :
• Other materials, size and/or configurations
• Other screen, mesh or wedge wire
• Other covers
• Other drain/vent connections
(ex. Valve, Flange, etc.)
• Lager than 24”, to be fabricated under
Client’s request
G-MEC KOREA Co., Ltd.
G-MEC MACHINERY
■ Hydraulic Test Machine
■ Welding Turn Table
■ Steam Testing Machine
■ Order Made Machine and Etc.
Address : Room2003, 2nd Floor, 195, Baengma-Ro, Ilsandong-Gu, Goyang-Si,
Gyeonggi-do, KOREA
TEL : +82-31-926-2041
FAX : +82-31-926-2044
Email : Mr. Y.S Lee / [email protected]
Mr. G.I Seo / [email protected]
