Standard Modultainer Cases

Large Cases

Standard Modultainer Cases

The Standard Modultainer isavailable in full, 3/4 and 1/2 dincases with comprehensiveselection of inserts.

Standard Modultainers areideally suited for use with largetrauma, spinal, reconstructive ororthopedic instrument sets.

Benefits• Components allow flexibility

to configure unique instruments sets.

• Modular components allow instruments to be compartmentalized for efficient usage.

• Clear Radel® R lids allow easy identification of instruments.

15-01

Part #

2-1100

Full Size Complete System Includes: 4” Base, Lid and Mat, 17.3 x 7.25 x 4 inches (43.9 x 18.4 x10.2 cm)

Description

2-1000

Full Size Complete System Includes: 2” Base, Lid and Mat, 18.3 x 8.35 x 2 inches(46.5 x 21.2 x 5.1 cm)

*All dimensions are internal

Standard Modultainer Complete Systems

3/4 Size Complete System Includes: 2” Base, Lid and Mat, 13.45 x 8.41 x 2 inches (34.1 x 21.4 x 5.1 cm)

2-3200

3/4 Size Complete System Includes: 4” Base, Lid and Mat, 12.25 x 7.25 x 4 inches (31.1 x 18.4 x10.2 cm)

2-3000

1/2 Size Complete System Includes: 4” Base, Lid and Mat, 7.25 x 7.25 x 4 inches (18.4 x 18.4 x10.2 cm)

2-2000

www.symmetrymedical.com

Cases.qxp 3/9/2007 03:13 PM Page 19

Large Cases

Standard Modultainer Cases

Standard Modultainer Components

15-02

Insert #

2-1050

Full Size Upper Insert , 11/4”,17.5 x 7.6 x 1.25 inches(44.5 x 19.3 x 3.2 cm)

Description

2-2020

Full Size Upper Insert, 2”,17.5 x 7.5 x 2 inches(44.5 x 19 x 5.1 cm)

2-2030

3/4 Size Upper Insert, 11/2”,11.7 x 7.8 x 1.5 inches(29.7 x 19.8 x 3.8 cm)

2-1040

Full Size Lower Insert , 11/4”,16 x 7 x 1.25 inches(40.6 x 17.8 x 3.2 cm)

*All dimensions are internalSilicone mats must be purchased separately when ordering individual inserts

Full Size Insert LidUse with Insert #2-1050

2-1070

1/4 Size Insert,7.8 x 3.4 x 1.5 inches(19.8 x 8.6 x 3.8 cm)

2-1400

1/2 Size Upper Insert, 11/2”,7.75 x 7.75 x 1.5 inches(19.7 x 19.7 x3.8 cm)

1/2 Size Lower Insert, 3/4”,7 x 7 x .75 inches(17.8 x 17.8 x1.9 cm)

3/4 Size Lower Insert, 3/4”,11 x 7 x .75 inches(27.9 x 17.8 x 1.9 cm)

2-3020

2-3030

2-1020

Full Size Lower Insert , 3/4”,16 x 7 x .75 inches(40.6 x 17.8 x1.9 cm)

2-1030


- - -

2-1035

2-1055

2-1045

2-3025

2-3035

2-1025

2-2025

2-2035

2-1405

Mat #


Modultainer II is a modular system available in Radel® R or Aluminum.

Modultainer II is ideally suitedfor use with large instruments,spinal, trauma, reconstructive ororthopedic instrument sets.

Benefits• Maximum flexibility for

instrument set configuration.• Radel R inserts are

interchangeable with metal base.

• Various floor ventilation configurations allow choice of Flex System Accessories.

Part #

2-4020

Double-Level Assembly, 4” Deep Base, Lid, Insert and 4 HalfMats, 19.75 x 9.4 x 4 inches (50.2 x 23.9 x 10.2 cm)

Description

2-4010

Single-Level Assembly, 4” Deep Base, Lid and 2 Half Mats, 19.75 x 9.4 x 4 inches (50.2 x 23.9 x 10.2 cm)

2-4000

Single-Level Assembly, 2” Deep Upper Insert, Lid and 2 HalfMats, 18.25 x 9 x 2 inches (46.4 x 22.9 x 5.1 cm)

Modultainer II, Radel® R, 1/4” Hole Pattern


15-03

Part #

2-4110Snap-In Post (Pkg. 12)*

Description

2-4120

2-4130

Lateral Silicone Tie Down (Pkg. 12)*

Diagonal Silicone Tie Down (Pkg. 12)*

Silicone Tie Down Combination Pack(6 Lateral, 6 Diagonal)* 2-4150

Removal Tool*Removal Tool Required to remove assembledposts from base and insert.

2-4140

*Flex System accessories for use with Modultainer II, Radel 1/4” hole pattern only

Modultainer Flex System Accessories


Modultainer II Cases

Large Cases


Part #

2-41601 Position Cradle (pkg. 5)*For use with Cruciform Hole Pattern

Description

2-4185

2-9092

6 Position Cradle (pkg. 5)*For use with Cruciform Hole Pattern

Mat for Aluminum Insert

3 Position Cradle (pkg. 5)*For use with Cruciform Hole Pattern 2-4170

Mat for Aluminum Base 2-9091

Modultainer II Cases

Modultainer II, Aluminum, Cruciform Hole Pattern

2-9062Metal Tags (pkg. 4: 2 Small, 2 Large)

15-04

Modultainer Flex System Accessories

Part #

2-9020

Double-Level Assembly, 4” Base,Lid, Insert, 19.75 x 9.4 x 4 inches (50.2 x 23.9 x 10.2 cm)

Description

2-9010Single-Level Assembly, 4” Base, Lid, 19.75 x 9.4 x 4 inches (50.2 x 23.9 x 10.2 cm)

2-9000

Single-Level Assembly, 2” Base, Lid, 19.75 x 9.4 x 2 inches (50.2 x 23.9 x 5.1 cm)


*Flex System accessories for use with Modultainer II Aluminum or Modultainer III


Large Cases


Modultainer III Cases

The Modultainer III is an allmetal system designed toaccommodate larger sizedinstrument sets.

Benefits• Choice of Radel® R or

aluminum lids.

• Durable Radel R clear lids allow easy identification of instruments.

• Cruciform hole pattern allows optimum steam penetration and drying.

• Compatible with snap in flex accessories.

Part #

2-50602” Aluminum Base with AluminumLid, 21.1 x 9.8 x 1.89 inches(53.6 x 24.9 x 4.8 cm)

Description

2-70602” Aluminum Base with Radel Lid,21.1 x 9.8 x 1.89 inches(53.6 x 24.9 x 4.8 cm)

2-50653” Aluminum Base with AluminumLid, 21.1 x 9.8 x 3.15 inches(53.6 x 24.9 x 8 cm)

3” Aluminum Base with Radel Lid,21.1 x 9.8 x 3.15 inches(53.6 x 24.9 x 8 cm)

2-7065

4” Aluminum Base with Radel Lid,21.1 x 9.8 x 3.82 inches(53.6 x 24.9 x 9.7 cm)

2-5070

2-7070

4” Aluminum Base with AluminumLid, 21.1 x 9.8 x 3.82 inches(53.6 x 24.9 x 9.7 cm)

15-05


5” Aluminum Base with AluminumLid, 21.1 x 9.8 x5.3 inches(53.6 x 24.9 x13.5 cm)

2-7075

2-5075

5” Aluminum Base with Radel Lid,21.1 x 9.8 x5.3 inches(53.6 x 24.9 x13.5 cm)


Large Cases

Modultainer III Base and Lid


Modultainer III Cases

Modultainer III Aluminum Inserts

Part #

2-70852/3 Insert 2” Size,15 x 9.17 x 1.89 inches(38.1 x 23.3 x 4.8 cm)

Description

2-7080Full Insert, 2” Size20.6 x 9.17 x 1.89 inches(52.3 x 23.3 x 4.8 cm)

Modultainer III Brackets and Silicone Mats

Part #

2-6005Silicone Mat for Base

Description

2-6015

2-6156

Silicone Mat for Full Insert

Wall Brackets (Package of 4)**

15-06


*All dimensions are internal**Wall brackets required to support inserts inside bases.


Large Cases


15-07

MultiPak® Cases

The MultiPak® is a highly versatile tray system designedfor organizing and protectingyour delicate surgical instrumentation. The modulardesign, coupled with a widearray of components, permitsthe custom configuration of virtually any instrument set.

Do it yourself or take advantageof the CustomPak service. Atrained professional will visityour facility and configure theinstrument tray system on-site.The result is a tray that meetsyour specific needs, allowingyou to “fine tune” the configura-tion prior to purchasing risk-free.

Benefits• Unique instrument processing,

handling, transport and sterilization tray system.

• Almost limitless custom-configurations.

• Buy only the pieces you need.

Part #Description

5000-01-275PLarge Base Unit, 9.2 x 20 x 2.6 inches (23.4 x 50.8 x 6.6 cm)

5000-01-375PLarge Base Unit, 9.2 x 20 x 3.6 inches (23.4 x 50.8 x 9.1 cm)

Large Base Unit, 9.2 x 20 x 4.6 inches (23.4 x 50.8 x 11.7 cm)

5000-01-475P

Clear Lid for 5000 Base, 9.7 x 20.5 x .2 inches (24.6 x 52 x .5 cm)

5000-50-000P

5000-50-175PClear Elevated Lid, 9.7 x 20 x 1.4 inches (24.6 x 50.8 x 3.6 cm)

MultiPak Base Units and Lids

MultiPak 20” Endoscopic Kit

Part #Description

5500

Kit Includes: 5000-01-475P Base,5000-50-175P Lid, 5111 Wire Rack,5022 Insert Tray, (4) 5200 BarHolders, (4) 5233 “T” Brackets, and Hardware.**



*All dimensions are internal** Instruments and silicone parts are not included

Large Cases


15-08

MultiPak® Cases

MultiPak Insert Trays

Clear Lid for 5010 Insert Tray,9.1 x 19.9 x .2 inches(23.1 x 50.6 x .5 cm)

5010-50-000P

Clear Lid for 5012 Insert Tray,4.3 x 19.9 x .2 inches,(10.9 x 50.6 x .5 cm)

5022-50-000P

5012-50-000P

Clear Lid for 5022 Insert Tray,9 x 9.8 x .2 inches,(22.9 x 24.9 x .5 cm)

5023-50-000PClear Lid for 5023 Insert Tray,9 x 13 x .2 inches(22.9 x 33 x .5 cm)

Part #Description

5022-03-180PInsert Tray for 5000 Base, 8.7 x 9.5 x 1.7 inches (22.1 x 24.1 x 4.3 cm)

5023-03-180PInsert Tray for 5000 Base,8.7 x 12.7 x 1.7 inches(22.1 x 32.3 x 4.3 cm)

Full Insert Tray for 5000 Base,8.7 x 19.5 x 1.7 inches(22.1 x 49.5 x 4.3 cm)

5010-03-180P

Long Insert Tray for 5000 Base,4 x 19.5 x 1.7 inches(10 x 49.5 x 4.3 cm)

5012-03-180P

Deep Insert Tray for 5000 Base,8.7 x 12.7 x 3.3 inches(22.1 x 35.3 x 8.4 cm)

5122-03-375P

5123-03-375P

Deep Insert Tray for 5000 Base,8.7 x 9.5 x 3.3 inches(22.1 x 24.1 x 8.4 cm)


Part #Description

MultiPak Clear Lids

* 5122-03-375P and 5123-03-375P compatible with MultiPak elevated lids only.All dimensions are internal


Insert Tray with Shelf Hangers, for5123-03-375P Insert Tray,8.5 x 12.5 x 1.78 inches(21.6 x 31.8 x 4.5 cm)

5024-03-180P

Large Cases


Part #Description


Elevated Lid for 5022 or 5122 InsertTrays, 8.4 x 9.1 x 1.4 inches(21.3 x 23.1 x 3.6 cm)

5022-50-175P

5023-50-175PElevated Lid for 5023 or 5123 InsertTray, 8.4 x 12.4 x 1.4 inches(21.3 x 31.5 x 3.6 cm)

MultiPak® Cases

MultiPak Elevated Lids

15-09 www.symmetrymedical.com

MultiPak 2/3 Tray with Plastic Snap Latch

Part #Description


Insert Tray for 5000 Base, 8.7 x 12.8 x 1.3 inches(22.1 x 32.5 x 3.3 cm)

5023-03-E

5023-50-EClear Lid for 5023-03-E Insert Tray,8.8 x 13.1 x .2 inches(22.4 x 33.3 x .5 cm)

Elevated Lid for 5010 Insert Tray,19.3 x 8.5 x 1.4 inches(49 x 21.6 x 3.6 cm)

5010-50-175P

Large Cases


MultiPak® Cases

MultiPak Jr. Units

Part #Description

7024Long Base, Elevated TransparentLid, 9.1 x 24.4 x 6 inches (23.1 x 61.9 x 15.2 cm)

7026Long Base, Elevated TransparentLid, 9.4 x 25.5 x 6.1 inches (23.9 x 64.8 x 15.5 cm)

Elevated Transparent Lid for 7024,9.1 x 24.4 x 1.4 inches(23.1 x 61.9 x 3.6 cm)

7024-01Long Base for 7024,9.4 x 24.7 x 4.6 inches(23.9 x 62.7 x 11.7 cm)

7026-01

7024-02

Long Base for 7026,9.2 x 25.5 x 5.9 inches(23.4 x 64.8 x 15 cm)

Elevated Transparent Lid for 7026,9.2 x 25.5 x 1.3 inches(23.4 x 64.8 x 3.3 cm)

7026-02

15-10www.symmetrymedical.com

Part #Description

5006-01-390PBase Unit,5.5 x 12.8 x 3.9 inches(14 x 32.5 x 9.8 cm)

5006-03-150PInsert Tray for 5006 Base,5.1 x 11.2 x 1 inches(13 x 28.5 x 2.5 cm)

Transparent Lid for 5006 Base,5.8 x 12.9 x .2 inches(14.7 x 32.8 x .5 cm)

5006-50-000P

MultiPak Hybrid, Aluminum Base, Radel® Lid



Large Cases


15-11

MultiPak® III Cases

MultiPakIIIAluminum Base Units and Lids

Part #

4A0W101030Base Unit,9.45 x 10.22 x 3 inches(24 x 26 x 7.6 cm)

Description

4A0W102030Base Unit,9.45 x 20.05 x 3 inches(24 x 50.9 x 7.6 cm)

4A0W102630Base Unit,9.45 x 25.52 x 3 inches(24 x 64.8 x 7.6 cm)

4A0W101045Base Unit,9.45 x 10.22 x 4.5 inches(24 x 26 x 11.4 cm)

Base Unit,9.45 x 20.05 x 4.5 inches(24 x 50.9 x 11.4 cm)

4A0W102045


4A0W102645

Base Unit,9.45 x 20.05 x 6 inches(24 x 50.9 x 15.2 cm)

4A0W101060

4A0W102060

Base Unit,9.45 x 10.22 x 6 inches(24 x 26 x 15.2 cm)



4A0W102660

Lid for Aluminum Base,9.695 x 10.65 x .386 inches(24.6 x 27 x 1 cm)

4A9W102003

4A9W101003

Lid for Aluminum Base,9.695 x 20.48 x .386 inches(24.6 x 52 x 1 cm)

Lid for Aluminum Base,9.695 x 25.95 x .386 inches(24.6 x 65.9 x 1 cm)

4A9W102603


Large Cases


15-12


MultiPakIII Aluminum Sided Inserts and Lids

Part #

4A1W091017Sided Insert, 8.84 x 9.4 x 1.72 inches(22.4 x 23.9 x 4.4 cm)

Description



4A8W091003Lid for Sided Insert,9.08 x 9.83 x .354 inches(23 x 24.9 x .9 cm)

Lid for Sided Insert,9.08 x 13.08 x .354 inches(23 x 33.2 x .9 cm)

4A8W091303

Lid for Sided Insert,9.08 x 19.88 x .354 inches(23 x 50.5 x .9 cm)

4A8W092003

Part #

4A2W091011Sideless Insert,9 x 9.59 x .965 inches (22.8 x 24.3 x 2.4 cm)

Description



4A2W091018Sideless Insert,9 x 9.59 x 1.715 inches (22.8 x 24.3 x 4.4 cm)

Sideless Insert,9 x 19.64 x 1.715 inches (22.8 x 49.8 x 4.4 cm)

4A2W092018


4A2W092518


4A2W091026

4A2W092026



4A2W092526

MultiPak III Aluminum Sideless Inserts


Large Cases


MultiPak® Cases

MultiPakIII Stainless Steel Base Units and Lids

Part #

4S0W101030Base Unit,9.52 x 10.35 x 3 inches(24 x 26.3 x 7.6 cm)

Description



4S0W101045Base Unit,9.52 x 10.35 x 4.5 inches(24 x 26.3 x 11.4 cm)


4S0W102045


4S0W102645


4S0W101060

4S0W102060




4S0W102660

Lid for Stainless Steel Base,9.7 x 10.65 x .386 inches(24.6 x 27 x 1 cm)

4S9W102003

4S9W101003

Lid for Stainless Steel Base,9.7 x 20.48 x .386 inches(24.6 x 52 x 1 cm)

Lid for Stainless Steel Base,9.7 x 25.95 x .386 inches(24.6 x 65.9 x 1 cm)

4S9W102603


Large Cases


Part #Description


MultiPakIII Stainless Steel Sided Inserts and Lids

Part #

4S1W091017Sided Insert, 8.9 x 9.53 x 1.76 inches(22.6 x 24.2 x 4.5 cm)

Description



4S8W091003Lid for Sided Insert,9.08 x 9.83 x .386 inches(23 x 24.9 x 1 cm)

Lid for Sided Insert,9.08 x 13.08 x .386 inches(23 x 33.2 x 1 cm)

4S8W091303

Lid for Sided Insert,9.08 x 19.88 x .386 inches(23 x 50.5 x 1 cm)

4S8W092003

4S2W091011Sideless Insert,9 x 9.65 x 1.3 inches (22.8 x 24.5 x 2.6 cm)

4S2W092011Sideless Insert,9 x 19.7 x 1.3 inches (22.8 x 50 x 2.6 cm)



Sideless Insert,9 x 19.7 x 1.715 inches (22.8 x 50 x 4.4 cm)

4S2W092018


4S2W092518

Sideless Insert,9 x 19.7 x 2.465 inches (22.8 x 50 x 6.3 cm)

4S2W091026

4S2W092026



4S2W092526

MultiPakIII Stainless Steel Sideless Inserts



Large Cases


MultiPak® Cases

MultiPakInstrument Racks

15-15

Part #

5108Wire Rack for 5022 and 5122 InsertTray, 7.9 x 8.9 x 3 inches(20 x 22.7 x 7.7 cm)

Description

5109Wire Rack for 5023 and 5123 InsertTray, 7.9 x 12.9 x 3.2 inches(20 x 31.2 x 8.2 cm)

5110Wire Rack Instrument Holder for5000 Base, 8.7 x 19.7 x 3.3 inches(22.2 x 50 x 8.3 cm)

5111

Wire Rack Instrument Holder for5000 Base (Requires 5000-50-175P)8.7 x 19.7 x 3.8 inches(22.2 x 50 x 9.5 cm)

Wire Rack with Handle, Instrument Holder for 5000 Base (Requires 5000-50-175P), 8.7 x 19.7 x 3.9 inches (22.2 x 50 x 10 cm)

5112

Wire Rack with Handle andInstrument Holder for 5000 Base(Requires 5000-50-175P), 8.7 x 19.7 x 4.3 inches (22.2 x 50 x 10.9 cm)

5113

Wire Rack with Handle for 7024,8.7 x 24.4 x 4.4 inches(22.2 x 61.8 x 11.2 cm)

Wire Rack with Handle for 7026,9.34 x 24.5 x 5.5 inches(23.7 x 62.2 x 14 cm)

7113

7513

Part #Description

MultiPakInstrument Racks with Handle


5111 shown with 5200 plastic bars, sold separately

5112 shown

Large Cases


Part #

5120Celcon Nuts and Bolts,Package of 10

Description

5236Divider, Long, Package of 2,For use with 5000 Base Only,Requires 5236 (19.9” x 2.8”)

5200Endoscopic Silicone Bar Holder forWire Rack 5100-5113, 7113 (7”)

5235Divider, Short, Package of 2,For use with 5000 Base Only,Requires 5236 (9.1” x 2.8”)

Divider, LongFor use with 5010 Insert Trays 5238

Endoscopic Silicone Bar Holder forWire Rack Only 7513 (7”)

7200

Endoscopic Silicone Bar Holder forWire Rack 5108 or 5109 (6.5”)

5237

5200N

Divider, ShortFor use with 5010 Insert Trays

Holder, Slotted Plastic for Silicone Bars (2.9”)

5215

Holder, Slotted Plastic for Silicone Bar (7”)

5210

5211

Holder, Slotted for 5235 and 5236 Only (1.5”)

Metal Carrying Handle Kit for 5000-01, 5010-03 and 5022-03 5130

Metal Screw, Black, for 5231 and5233, Package of 50 (.25”)

Metal Screw, Black, for 5241 Post,Package of 50 (.375”)

Nameplate (Blank)4.7 x 2.5 inches (19.9 x 6.4 cm)

5121

5122

5216

MultiPak® Cases

MultiPakAccessories


*Silicone accessories include plastic holding bar and screws; excluding 5310

Large Cases


MultiPak® Cases

MultiPakAccessories

Post, Plastic Holding1.41”

Post, Short, Movable1.24”

Post, Long, Movable2”

“L” Shelf Bracket

Stainless Steel “L” Shelf Bracket,(Compatible with MultiPak III Only)

“T” Shelf Bracket

Part #

5241

Description

5231

5250

4S5231

5251

5233

5311Bar, Blank, 2.9 inches (7.4 cm),

53203 Slot Instrument Bar, 5 mmØ, 2.9 inches (7.4 cm)

5310Bar, Blank, 12 inches (30.5 cm), Priced Per Foot

3 Slot Instrument Bar, 8 - 15 mmØ, 2.9 inches (7.4 cm)

5331


5330

5334

3 Slot Instrument Bar, 3 - 8 mmØ, 2.9 inches (7.4 cm)

10 Slot Instrument Bar, 3 - 8 mmØ, 7 inches (17.8 cm)

5370

8 Slot Instrument Bar, 8 - 15 mmØ, 7 inches (17.8 cm) 5371

8 Slot Instrument Bar, 10 mmØ, 7 inches (17.8 cm)

5374



Large Cases


MultiPak® Cases

MultiPakSilicone Accessories

15-18

12 Slot Instrument Bar, 6.35 mmØ, 7 inches (17.8 cm)


5302

5333

6 Slot Instrument Bar, 6 mmØ, 7 inches (17.8 cm) 5301

6 Slot Instrument Bar, 3 mmØ, 7 inches (17.8 cm) 5300

Double 9 Slot Silicone InstrumentBar, 5 &10 mmØ, 7 inches (17.8 cm)


5372

5375


2 Slot Scope Holder, Open 15 mmØ, Closed 12 mmØ, 2.9 inches (7.4 cm)

5373

5343

Double Ended Scope Holder, Open 12 mmØ, 2.9 inches (7.4 cm)

5341

Double Ended Scope Holder, Open 12 mmØ, Closed 8 mmØ, 2.9 inches (7.4 cm)

5340

Scope Holder, Open End, 12 mmØ, 1.5 inches (3.8 cm) 5353

Scope Holder, Closed End, 12 mmØ, 1.5 inches (3.8 cm)

5352

Part #Description

5332Double 3 Slot Instrument Bar, 5 &10 mmØ, 2.9 inches (7.4 cm)

4 Slot Instrument Bar, 2.9 inches (7.4 cm)

5312




Large Cases


MultiPak® Cases

MultiPakSilicone Fine Pin Mats

Part #

5000-04Fine Pin Mat for 5000 Base,8.9 x 19.7 inches(22.6 x 50 cm)

Description

5110-04Fine Pin Mat for 5000 Base, for usewith 5110 Rack, 8.9 x 18 inches(22.6 x 45.7 cm)

5006-04Fine Pin Mat for 5006 Base,5.4 x 12.5 inches(13.7 x 31.8 cm)

7024-04

Fine Pin Mat for 5010 Full InsertTray, 8.4 x 19.2 inches(21.3 x 48.8 cm)

5010-04

Fine Pin Mat for 7024 Base,9.4 x 23 inches(23.9 x 58.4 cm)

Fine Pin Mat for 5012 Tray Insert,3.7 x 19.2 inches(9.4 x 48.9 cm)

5012-04


5022-04


5023-04


Fine Pin Mat for 5023-03-E TrayInsert, 8.4 x 12.5 inches (21.3 x 31.8 cm)

5023-04-E

Large Cases


MultiPak® Cases

MultiPakSilicone Small Diamond Grid Mats

15-20

5000-04SDSmall Diamond Grid Mat for 5000 Base, 8.9 x 19.7 inches (22.6 X 50 cm)

Small Diamond Grid Mat for 5000Base, for use with 5110 Rack, 8.9 x 18 inches (22.6 x 45.7 cm)

5110-04SD

Small Diamond Grid Mat for 5010 Full Tray Insert, 8.4 x 19.2 inches (21.3 x 48.8 cm)

5010-04SD

Small Diamond Grid Mat for 5012 Full Tray Insert, 3.7 x 19.2 inches (9.4 x 48.9 cm)

5012-04SD

Small Diamond Grid Mat for 5022 Tray Insert, 8.4 x 9.1 inches (21.3 x 23.1 cm)

5022-04SD

Small Diamond Grid Mat for 5023 Tray Insert, 8.4 x 12.5 inches (21.3 x 31.8 cm)

5023-04SD

Part #Description

Small Diamond Grid Mat for 7026 Base, 9.4 x 25 inches (23.9 x 63.5 cm)

7026-04SD


Large Cases


5010-04D

www.symmetrymedical.com15-21

MultiPak® Cases

MultiPakSilicone Large Diamond Grid Mats

Large Diamond Grid Mat for 5000 Base, 8.9 x 19.7 inches (22.6 x 50 cm)

Large Diamond Grid Mat for 5006 Base, 5.4 x 12.5 inches (13.7 x 31.8 cm)

5006-04D

Large Diamond Grid Mat for 5000Base, for use With 5110 Rack, 8.9 x 19 inches (22.6 x 45.7 cm)

5000-04D

5110-04D

Large Diamond Grid Mat for 5010 Full Tray Insert, 8.4 x 19.2 inches (21.3 x 48.8 cm)

Large Diamond Grid Mat for 5012 Full Tray Insert, 3.7 x 19.2 inches (9.4 x 48.9 cm)

5012-04D

Large Diamond Grid Mat for 5022 Tray Insert, 8.4 x 9.1 inches (21.3 x 23.1 cm)

5022-04D

Large Diamond Grid Mat for 5022Tray Insert and 5108 Wire Rack,8.3 x 9 inches (21.1 x 22.9 cm)

5108-04D

Large Diamond Grid Mat for 5023 Tray Insert, 8.4 x 12.5 inches (21.3 x 31.8 cm)

5023-04D

Large Diamond Grid Mat for 5023Tray Insert and 5109 Wire Rack,8.3 x 12.4 inches (21.1 x 31.5 cm)

5109-04D

Part #Description

Large Diamond Grid Mat for 5023-ETray Insert and 5109 Wire Rack,8.4 x 12.5 inches (21.3 x 31.8 cm)

5023-04-E-D

Large Cases


StackPak® Cases

StackPak® is a revolutionarynew way to handle, transport, organize and sterilize delicatesurgical instrumentation. Theunique latch design creates asimple way to combine complex instrument sets intoone neat package.

Benefits• Fully Modular System is

compatible with all existing Multipak accessories.

• Add additional trays if the set expands.

• Only ONE lid needed to cover the entire system.

• New latch design allows you to stack trays while keeping them secure.

Part #

5710-03-180P

2/3 Length Lid.13 x 9 x .2 inches(33 x 22.9 x .5 cm)

Description

5722-03-375P

Full Length Tray,19.5 x 8.7 x 1.7 inches(49.5 x 22.1 x 4.3 cm)

5722-50-000P

2/3 Length Tray.12.7 x 8.7 x 1.7 inches(32.3 x 22.1 x 4.3 cm)

5710-03-375P

Full Length Lid,19.9 x 9 x .2 inches(49.5 x 22.9 x .5 cm)

1/2 Length Tray,9.5 x 8.7 x 1.7 inches(24.1 x 22.1 x 4.3 cm)

5722-03-180P

1/2 Deep Tray,9.5 x 8.7 x 3.6 inches(24.1 x 22.1 x 9.1 cm)

1/2 Length Lid,9.8 x 9 x .2 inches(24.9 x 22.9 x .5 cm)

2/3 Deep Tray.12.7 x 8.7 x 3.6 inches(32.3 x 22.1 x 9.1 cm)

5723-03-180P

5723-03-375P

5723-50-000P

Deep Full Tray,19.5 x 8.7 x 3.6 inches(49.5 x 22.1 x 9.1 cm)

5710-50-000P

15-22

Part #Description

StackPak Trays

StackPak Lids




Large Cases


Quick KitT M Cases

The Quick KitTM provides customized case solutions in areduced timeframe.

Quick Kits are ideally suited foruse with large instruments:trauma, spinal or orthopedic.

Benefits• Over 25 silicone and Radel® R

brackets accommodate a wide variety of instruments.

• Each bracket packaged with track and screws for easy assembly.

• Unique hole pattern allows brackets to be placed at different angles in 45o increments.

• Replacement tracks also available.

• Parts are stocked for quick access and delivery.

Part #

2-8200

Metal Double-Level Assembly, 4” Deep Base, Lid, and Insert,19.75 x 9.4 x 4 inches,(50.2 x 23.9 x 10.2 cm)

Description

2-8100

Metal Single-Level Assembly, 2” Deep Base, and Lid, 19.75 x 9.4 x 2 inches,(50.2 x 23.9 x 5.1 cm)


Quick KitBase, Lid and Insert

Quick Kit Silicone Components

Part #

2-8101Retainer Bracket, Expandable, for Oval Geometry .5 x .18”*, 3 x 2 inches (7.6 x 5.1 cm)

Description

2-8102Retainer Bracket, Expandable, for Oval Geometry .5 x .38”*, 3 x 2 inches (7.6 x 5.1 cm)

2-8103Retainer Bracket, Expandable, forRound Geometry .13 - .18” Diameter*, 1.5 x 2 inches (3.8 x 5.1 cm)

Retainer Bracket, Expandable, forRound Geometry .38 - .75” Diameter*3 x 2 inches (7.6 x 5.1 cm)

2-8104

2-8105Retainer Bracket, Expandable, for Round Geometry .75 - 1.12”Diameter*, 3 x 2 inches (7.6 x 5.1 cm)

15-23

* Bracket geometry dimensions are approximate.


Large Cases


Quick KitT M Cases


Part #

2-8134Support Bracket, Expandable, for Round Geometry <> .12”*, 1.5 x 2 inches (3.8 x 5.1 cm)

Description

2-8106Support Bracket, Expandable, for Round Geometry <> .38”*, 3 x 2 inches (7.6 x 5.1 cm)

2-8107Support Bracket, for Round Geometry <> .12”*, 1.5 x 2 inches (3.8 x 5.1 cm)

Support Bracket, for Round Geometry <> .25”*, 3 x 2 inches (7.6 x 5.1 cm)

2-8108

2-8109Retainer Bracket, for Rectangle Geometry .5 x .25”*, 1.5 x 2 inches (3.8 x 5.1 cm)

2-8110Retainer Bracket, for Rectangle Geometry 1.25 x .38”*, 3 x 2 inches (7.6 x 5.1 cm)

2-8111

2-8112

2-8113

2-8114

2-8115

2-8118

2-8117

2-8116

2-8119

15-24

Support Bracket, for Rectangle Geometry .18 x 1.25”*, 1.5 x 2 inches (3.8 x 5.1 cm)

Support Bracket, for Rectangle Geometry .25 x 1.25”*, 3 x 2 inches (7.6 x 5.1 cm)


Support Bracket, for Rectangle Geometry .12 x 1”*, 1.5 x 2 inches (3.8 x 5.1 cm)

Support Bracket - 3 Position, for Rectangle Geometry .18 x 1.12”*, 3 x 2 inches (7.6 x 5.1 cm)

Retainer Bracket, for Square Geometry .25”*, 1.5 x 2 inches (3.8 x 5.1 cm)

Retainer Bracket, Expandable, for Square Geometry .5”*, 3 x 2 inches (7.6 x 5.1 cm)

Retainer Bracket, for Triangular Geometry .25”*, 1.5 x 2 inches (3.8 x 5.1 cm)

Retainer Bracket, Expandable, for Triangular Geometry .38”*, 3 x 2 inches (7.6 x 5.1 cm)

Retainer Bracket with Latch, for Delicate Instruments, 1.5 x 2 inches (3.8 x 5.1 cm)


Large Cases


Quick KitT M Cases


15-25

Part #

2-8120Trim-To-Fit Bracket, Multi-Level Adjustment, 1.5 x 2 inches (3.8 x 5.1 cm)

Description

2-8121Trim-To-Fit Bracket, Length and Height Adjustment, 3 x 2 inches (7.6 x 5.1 cm)

2-8124Solid Bracket 1.5”, Intended as a Barrier or Divider,1.5 x 2 inches (3.8 x 5.1 cm)

Solid Bracket 3”, Intended as a Barrier or Divider,3 x 2 inches (7.6 x 5.1 cm)

2-8125

2-8128

2-8129

2-8130

2-8131


Radel Single Track 1.5”,1.5 inches (3.8 cm)

Radel Single Track 3”,3 inches (7.6 cm)

Radel Double Track 1.5”,1.5 inches (3.8 cm)

Radel Double Track 3”,3 inches (7.6 cm)

Part #

2-8122Bracket with 2 Adjustable Bands,for Delicate Instruments,1.5 x 2 inches (3.8 x 5.1 cm)

Description

2-8123Sloped Locking Bracket Pair, for Large and Heavy Instruments,1.5 x 2 inches (3.8 x 5.1 cm)

2-8126Solid Bracket 1.5”, Intended as a Barrier or Divider,1.5 x 2 inches (3.8 x 5.1 cm)

Solid Bracket 3”, Intended as a Barrier or Divider,3 x 2 inches (7.6 x 5.1 cm)

2-8127

Quick Kit Radel® R Components



Large Cases


Documents

Standard Modultainer Cases