Standard Internasional

STANDARD INTERNASIONAL UNTUK DISIPLIN INSTRUMENTASI

Rangkuman Diskusi KBK Instrumentasi 17 Oktober 2006 Milis Migas Indonesia : http://groups.yahoo.com/group/Migas_Indonesia Migas Indonesia Online : http://www.migas-indonesia.com Migas Indonesia Network : http://www.migas-indonesia.net Editor :

Windra Gumilar Swastioko Budhi Suryanto Moderator KBK Instrumentasi

Aldie – Sharp Semiconductor Indonesia Saya mempunyai pertanyaan, dari banyak standard seperti ISA, API, NEC, ASTM, ANSI, NFPA, dll, kira-kira bagian mana dari standard tersebut yang sering diacu atau dipergunakan oleh Instrument Engineer ?. Misalnya untuk standard API, apakah seluruh bagian dari standard API itu sering digunakan atau hanya sebagian saja ?. Kalau hanya sebagian saja, kira-kira bagian mana saja ?. Hal yang sama juga berlaku untuk standard-standard lainnya. Mohon penjelasan dari rekan-rekan milis semua. Terima kasih sebelumnya atas infonya. Agus F. Tampubolon – PT. Billiton Indonesia (BHPBilliton) Pak Aldie, beberapa standard di bawah ini yang sering dipergunakan para Instrument Engineer adalah : 1. Yang pasti adalah ISA (Instrumentation, Systems and Automation Society). 2. Sedangkan API :

RP 551 Process Measurement Instrument RP 554 Process Instrumentation and Control RP 556 Instrumentation and Control System for Fired Heater and Steam Generator 26-60051 Program for Upgrading The NO2 Instrumentation Employed In The 1972

Chattanooga NO2 Exposure Study 4090 Improved Instrumentation for Determination of Exhaust Gas Oxygenate

Content 4121 Improved Instrumentation for Determination of Exhaust Gas Oxygenate

Content 4202 Program for Upgrading The NO2 Instrumentation Employed In The 1972

Chattanooga NO2 Exposure Study 4237 Program for Upgrading The NO2 Instrumentation Employed In The 1972 -

1973 Chattanooga NO2 Exposure Study 550 Binder Instrumentation & Control Manuals for Refinery

Rangkuman Diskusi KBK Instrumentasi Milis Migas Indonesia Halaman 1 dari 5

550 P1 Installation of Refinery Instruments and Control Systems Part 1 – Process Instrumentation and Control

550 P1 S1 Process Instrumentation & Control – Section 1 : Flow 550 P1 S10 Process Instrumentation & Control – Hydraulic System 550 P1 S11 Manual on Installation of Refinery Instruments and Control Systems Part 1 –

Process Instrumentation and Control Section 11 – Electrical Power Supply 550 P1 S12 Process Instrumentation & Control – Control Center 550 P1 S13 Process Instrumentation & Control – Alarms and Protective Devices 550 P1 S14 Manual on Installation of Refinery Instruments and Control Systems Part 1 –

Process Instrumentation and Control Section 14 – Process Computer Systems 550 P1 S2 Process Instrumentation & Control – Level 550 P1 S3 Process Instrumentation & Control – Temperature 550 P1 S4 Process Instrumentation & Control – Pressure 550 P1 S5 Process Instrumentation & Control – Automatic Control 550 P1 S7 Process Instrumentation & Control – Transmission System 550 P1 S8 Manual on Installation of Refinery Instruments and Control Systems Part 1 –

Process Instrumentation and Control Section 8 – Seals, Purges, and Winterizing

550 P1 S9 Process Instrumentation & Control – Air Supply System

3. Untuk NEC : NFPA 70 4. Untuk ASTM : Section 14.3 Temperature Measurement 5. Untuk ANSI :

ANSI INCITS 175 Information Technology – 19 mm TYPE ID-1 Recorded Instrumentation Digital Cassette Tape Format

ANSI INCITS 187 Information Systems – Recorded Magnetic Tape for Longitudinal Recording of Instrumentation Data Interchange

ANSI INCITS 341 Information Technology – 25.4 mm (1 in) Type DCRSI Recorded Instrumentation Digital Cartridge Tape Format

ANSI INCITS 344 Hilical – Scan Digital Tape Cassette 12.65 mm for Recorded Instrumentation – Digital Cassette Tape Format

ANSI INCITS / Information Systems – Precision Reels for Magnetic Tape Use in ISO 1860 Interchange Instrumentation Applications ANSI C39.6 Electrical Instrumentation Digital Measuring Instrument ANSI MC1.1 Digital Interface for Programmable Instrumentation ANSI N15.54 Instrumentation – Radiometric Calorimeters – Measurement Control

Program ANSI NCITS 175 Information Technology – 19 mm TYPE ID-1 Recorded

Instrumentation ANSI X3.175 19 mm – Type ID-1 Recorded Instrumentation Digital Cassette Tape

Format ANSI X3.187 Recorded Magnetic Tape for Longitudinal Recording of

Instrumentation Data – Interchange Tambahan dari Moderator KBK Instrumentasi Standard hanya digunakan untuk konteks dimana standard itu diperuntukkan atau diberlakukan. Ada kemungkinan satu konteks harus mengikuti satu atau beberapa standard yang berlaku.


Tambahan dari Swastioko Budhi Suryanto – Administrator Milis 1. INSTRUMENT SOCIETY OF AMERICA ( ISA )

• ISA S5.1 Instrument Symbol and Identification • ISA S5.2 Binary Logic Diagram for Process Operation • ISA S5.3 Graphic Symbol for DCS Logic and Computer System • ISA S5.4 Instrument Loop Diagrams • ISA S5.5 Graphic Symbol for Process Display • ISA S7.0.01 Quality Standard for Instrument Air • ISA S18.1 Annunciator Sequences and Specifications • ISA S20 Specification Forms for Process Measurement and Control Instruments,

Primary Elements and Control Valves • ISA S71.01 Environmental conditions for process measurements and control systems:

Temperature and Humidity • ISA S71.04 Environmental conditions for process measurements and control systems:

Airborne and contaminants • ISA S75.03 Face to Face Dimensions for Flanged Globe Style Control Valves • ISA S75.11 Control Valve Flow Characteristics and Rangeability • ISA S84.01 Application of Safety Instrumented Systems for the Process Industries • ISA RP 3.2 Flange Mounted Sharp Orifice Plates for Flow Measurement • ISA RP 12.1 Electrical Instruments in Hazardous Atmospheres • ISA RP 12.4 Instrument Purging for Reduction of Hazardous Area Classification • ISA RP 12.6 Installation of Intrinsically Safe Instrument Systems in Class I

Hazardous Locations • ISA RP 12.11 Electrical Instruments in Hazardous Dust • ISA RP 12.12 Electrical Equipment for Use in Class I, Division Hazardous (Classified)

Locations • ISA RP 31.1 Specification, Installation, and Calibration of Turbine Flowmeters • ISA RP 60.6 Nameplates, Labels and Tags for Control Centres • ISA RP 60.8 Electrical Guide for Control Centres • ISA RP 60.9 Piping Guide for Control Centres • ISA RP 551 Hardware testing of Digital Process Computer • ISA RP 5517 Hardware Testing of Digital Process Computer Codes of Practice Testing

Computer based System 2. INTERNATIONAL ELECTRO-TECHNICAL COMMISSION ( IEC )

• IEC 60068.2 Basic Environmental testing Procedure for Electric Components and Electronic Equipment

• IEC 60079 Electrical equipment for explosive gas atmospheres • IEC 60445 Identification of Apparatus Terminals and General Rules for a Uniform

System of Terminal marking, using an alpha numeric notation • IEC 60529 Degree of Protection provided by enclosures • IEC 60605 Equipment Reliability Testing • IEC 60801 Electromagnetic Compatibility for Industrial Process Measurement and

Control Equipment • IEC-61000 Electromagnetic Compatibility (EMC) • IEC 61024 Protection Against Lightning • IEC 61131-3 Programmable Controllers - Part 3: Programming languages


• IEC 61508 Functional Safety of Electrical/Electronic/Programmable Electronic Safety Related Systems

• IEC 61511 Programmable Electronic Systems (PES) for use in Safety Applications 3. AMERICAN NATIONAL STANDARDS INSTITUTE ( ANSI )

• ANSI B16.5 Steel Pipe Flanges and Flanged Fittings • ANSI B16.10 Face to Face and End to End Dimensions of Ferrous Valves • ANSI B16.36 Orifice Plates • ANSI B16.104 Valve Leakage Classification • ANSI N31.3 Power Piping • ANSI B31.3 Chemical Plant and Petroleum Refinery Piping • ANSI B31.4 Liquid Petroleum Transportation Piping Systems • ANSI B31.8 Gas Transmission and Distribution Piping Systems • ANSI MC96.1 Temperature Measurement Thermocouples

4. AMERICAN GAS ASSOCIATION ( AGA )

• Report No. 3 Orifice Metering of Natural Gas and other Related Hydrocarbon Fluids • Report No. 8 Compressibility Factors of Natural Gas and other Related Hydrocarbon

Fluids 5. AMERICAN PETROLEUM INSTITUTE ( API )

• API RP-14C Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms

• API RP-14E Recommended Practice for The Design and Installation of Offshore Production Platform Piping Systems

• API RP-14F Design and Installation of Electrical Systems for Offshore Production Platforms

• API RP-14G Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms

• API RP-14FZ Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations

• API RP-505 Recommended Practices for Classification of Locations for Electrical Installations at Petroleum Facilities Classified Class I, Zone O, Zone 1, and Zone 2

• API RP-520 Design and Installation of Pressure Relieving Systems in Refineries • API RP-521 Guide for Pressure Relief and Depressurizing Systems • API RP-526 Flanged Steel Safety Relief Valves • API RP-527 Commercial Seat Tightness of Safety Relief Valves with Metal-to-Metal

Seats • API RP-540 Electrical Installations in Petroleum Processing Plants • API RP-551 Process Measurement Instrumentation • API RP-552 Transmission Systems • API RP-554 Process Instrumentation and Control • API RP-555 Process Analyzers • API RP-574 Inspection Practices for Piping System Components • API RP-598 Valve Inspection and Testing • API RP-607 Fire Test for Soft-Seated Quarter-Turn Valves


• API RP-2000 Venting Atmospheric and Low-Pressure Storage Tanks, Non-Refrigerated and Refrigerated

• API 6FA Specification for Fire Test for Valves • API STD 1101 Measurement of Petroleum Liquid hydrocarbons by Positive Displacement

Meter • API STD 2531 Mechanical Displacement Meter Provers • MPMS 5.2 Manual of Petroleum Measurement Standards, Chapter 5, “Measurement

of Liquid Hydrocarbons by Displacement Meters” • MPMS 5.3 Manual of Petroleum Measurement Standards, Chapter 5, Section 3,

“Measurement of Light Hydrocarbons by Turbine Meters” • MPMS 8.2 Manual of Petroleum Measurement Standards, Chapter 8, Section 2,

“Sampling of Petroleum and Petroleum Products” • MPMS 12.2 Manual of Petroleum Measurement Standards, Chapter 12, Section 2,

“Flow Measurement: Electronic Liquid Measurement” 6. AMERICAN SOCIETY OF MECHANICAL ENGINEERS ( ASME )

• Section I Power Boiler Code • Section VIII Unfired Pressure Vessels Code

7. AMERICAN SOCIETY FOR TESTING MATERIALS ( ASTM )

• ASTM A269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

8. NATIONAL ASSOCIATION OF CORROSION ENGINEERS ( NACE )

• MR-01-75 Standard Material Requirements Sulfide Stress Cracking Resistant - Metallic Materials for Oilfield Equipment

9. NATIONAL FIRE PROTECTION ASSOCIATION ( NFPA )

• NFPA 72E Automatic Fire Detectors • NFPA 496 Purged Enclosures for Electrical Equipment

10. INTERNATIONAL STANDARDS ORGANIZATION ( ISO )

• ISO 4406 Hydraulic fluid power – Fluid – Method for coding the level of contamination by solid particles

• ISO 5884 Aerospace - Fluid systems and components – Methods for system sampling and measuring the solid particle contamination of hydraulic fluids

• ISO 5167 Measurement of fluid flow by means of Orifice Plates, Nozzles, & Venturi Tubes Inserted in Circular Cross Section Conduits Running Full

• ISO 5168 Measurement of Fluid Flow – Estimation of Uncertainty of a Flow Rate Measurement

11. BRITISH STANDARD ( BS )

• BS 6755 Part 1 Pressure Testing of Valves • BS 6755 Part 2 Testing of Valves. Fire Type Testing Requirements

Other equivalent codes and practices may be adopted but in all instances shall require COMPANY approval prior to implementation.


Documents

Standard Internasional