STAIR NOSINGS PVC ACCESSORIES & TRIMS TRANSITIONS SPECIFICATION GUIDE › img › quantum-specification... · 2016-11-16 · 6. Building Research Information Paper – IP15/03: Proprietary

STAIR NOSINGS

PVC ACCESSORIES & TRIMS

TRANSITIONS

June 2016

SPE

CIF

ICAT

ION

GU

IDE

FLOORING ACCESSORIES & ACCESS SOLUTIONSJUNE 2016

2

QUANTUM FLOORING SOLUTIONS

Quantum Flooring Solutions’ products have been specified and used on many projects both big and small, national and international. For more international case studies see page 65. They have a variety of flagship projects to their name, these include:

St Thomas’s Hospital, London Etihad Stadium, Manchester

The Titanic Museum, Belfast Scottish National Gallery of Modern Art, Edinburgh

The Leeds Arena Cardiff University

Stanstead Airport, London

Normandy Barrière Hotel, France

Alder Hey Hospital, Liverpool

The Leadenhall Building, London

1

CONTENTS

SECTION 1 – Introduction

Why Quantum Flooring Solutions? ...............................2

Quantum Profile Systems Ltd ........................................3

Stairway Specification & Building Regulations ..4–5

How to Specify the Correct Stair Nosing ..............6–7

How to Specify Safe Stairs .............................................8

LRVs & Colour Options ......................................................9

Specification Support ..................................................... 10

SECTION 2 – STAIRS: Stair Nosings (Stair Edging)

Technical Information ..................................................... 13

Q-Range Stair Nosings .......................................... 14–17

S-Range Stair Nosings ........................................... 18–21

H-Range Stair Nosings ........................................... 22–25

Z-Range Stair Nosings ........................................... 26–27

Flexible PVC Stair Nosings .................................... 28–29

Ecoglo Stair Nosings ....................................................... 30

Stair Edging Trims & Treadsteps ................................ 31

Fabrication & Finishes .................................................... 32

Stair Nosing Measuring & Fitting ...................... 33–34

SECTION 3 – WALLS: Accessories, Skirting, Cap & Cove

Wet Room Accessories Solution ................................. 37

Sit-On Skirtings ......................................................... 38–39

Set-In Skirtings ......................................................... 40–41

Flat Skirtings & Buffer Strips ............................... 42–43

Corner Profiles ................................................................... 43

Cove Formers & Capping Strips ......................... 44–45

Quantum Floormitres Cove & Cap Solution .......... 46

SECTION 4 – FLOORS: Transitions, Tactiles & Entrance Matting

Transition Specification .................................................. 49

Ramp Trims ................................................................ 50–51

Bevel Strips ................................................................ 50–51

Cover Joints, Trims & Thresholds ....................... 52–53

Floor Trims ‘Topline’ ................................................ 54–56

Tactiles ................................................................................. 57

Entrance Matting ...................................................... 58–59

SECTION 5 – Appendix

Access Experts .................................................................. 60

A Helping Hand ................................................................. 61

Testing .................................................................................. 62

Sustainability ..................................................................... 63

Sector Solutions ............................................................... 64

International & Export .................................................... 65

Packing Specifications .................................................... 66

Example Product Specification Statements .......... 67

Subject Index ..................................................................... 68

Product Index ...................................................................... 69

2

It is a name you can trust. Quantum Flooring Solutions is a leader in the flooring

accessories’ market and offers a complete range of products that help to make stairs safe

(Stair Nosings and Edgings), give a clean finish to floors at wall junctions (Skirtings and

Cappings) and cover for neat joints in floorcoverings (Trims, Edgings and Transitions).

Quantum Flooring Solutions is accredited with:

WHY QUANTUM FLOORING SOLUTIONS?

ISO14001

A commitment to environmental protection

ISO9001

A commitment to continually improve the manufacturing process

And supports:

NBS BIM

The first flooring accessories manufacturer to have BIM Models

NBS Plus

All products can be specified through NBS Plus

CFA

Membership of the only trade body representing the contract flooring market

UK Slip Resistance Group

Working to improve everyday safety on floors and stairs

And offers:

A 10 year warranty Providing peace of mind for your projects, subject to project application.

10YEAR

WARRANTY

3

Quantum Pro�le Systems Ltd LEAN, GREEN, SAFE & CLEAN

Quantum Pro�le Systems Ltd LEAN, GREEN, SAFE & CLEAN

Quantum Flooring Solutions is part of a larger family. Established 50 years ago,

PVC extrusion company Quantum Profile Systems Ltd (QPSL) is a leading manufacturer

of specialist building products promoted under the following brand names.

SPECIALIST FLOORING & BUILDING SOLUTIONS

Where required QPSL offers building products which

meet with the latest Building Regulations and BSi

Guidelines. The supply of these products is backed

up by expert technical and commercial support,

which is based on the combination of knowledge

from a strong manufacturing heritage and the

application of the latest Lean production principles.

The business employs a Quality Management

System (QMS) and is certified through ISO9001.

QPSL also reinforces its environmental commitment

by using recycled PVC in the production processes

and operates an Environmental Management

System (EMS) that is ISO14001 accredited.

LEAN MANUFACTURING

Lean manufacturing is the systematic method

of eliminating waste within the manufacturing

process. All employees at QPSL will always look

for better ways of providing value and eliminating

waste. QPSL is always “Learning to be Leaner”.

QPSL embraces five core Lean principles:

1. To Create Value as our customers see it.

2. To Improve Value Stream to do things that

create value for our customers.

3. To Generate Flow to eliminate job queues.

4. To allow Customer Pull to make and deliver

what the customer wants, when they want it.

5. To Strive for Perfection and never to be

satisfied.

Quantum Flooring Solutions offers a comprehensive

range of high performance flooring accessories for

use in a variety of contract building applications.

The Dacatie range of original insulated cavity

closers, frame formers and DPCs, offers a solution

to closing cavities around window and door reveals.

QLean Solutions is a flexible and innovative

approach to the supply of bespoke profiles

harnessing the Lean principles employed at QPSL.

Qwood offers a unique solution to overcome issues

associated with the use of timber. It is a specialised

timber composite that does not warp or rot and

can be handled using standard wood working tools

and techniques.

4

STAIRWAY SPECIFICATION & BUILDING REGULATIONS“Stairs, ladders and ramps shall be designed constructed and installed as to be safe for

people moving between different levels in or about the building.”

– from Building Regulation Document K, 2013, Schedule 1

This overall statement leads to five documents, which give guidance for the design of stairs (and associated

Stair Nosings) for use in buildings with public or shared use:

1. Building Regulation Document K: Protection from falling

2. Building Regulation Document M: Access to and use of buildings

3. BS 8300:2009+A1:2010: Lighting of stepped access and slip resistance

4. BS 9266:2013: Design of accessible and adaptable general needs housing

5. BS 5395-1:2010: Stairs, Ladders and Walkways

6. Building Research Information Paper – IP15/03: Proprietary nosings for non-domestic stairs

These documents indicate the following best practice recommendations and guidelines for Stair Nosing specification.

A. The recommended dimensions of a Stair Nosing:

BR (K&M), BS8300, BS9266 & BS5395

BR K, BS8300, BS9266 and BS5395 state the tread should measure between

50–65 mm and the riser 30–55 mm. BR K&M refer to both tread and riser

as being 55mm. This apparent difference can be reconciled by specifiers and

contractors since both sets of guidance are correct. The principle requirement

is that the nose of a step is clearly defined, and a proprietary stair nosing with

any of these dimensions can achieve this. Quantum Flooring Solutions has a

wide selection of Stair Nosings which have these dimensions.

B. The recommended Light Reflectance Value (LRV) colour of a Stair Nosing:

BR (K&M), BS8300, BS9266 & BS5395

The colour of the Stair Nosing is required to differ from that of the floorcovering. Every colour has a LRV

between 0 (Black) and 100 (White). There should be at least 30 points difference between the Stair Nosing

LRV and the floorcovering, e.g. If the floorcovering has a LRV of 50, then the Stair Nosing should have a LRV

of between 0–20 or 80–100.

This creates a ‘ladder effect’ which helps the partially sighted when ascending or descending stairs.

The Quantum Flooring Solutions range of tread and channel (UPVC) colours have LRVs, ranging from 5 to 81.

0black

1000white

0black

1000white

e.g. 30 points difference

50-65mm

30-55mm

5

C. The recommended slip resistance of a Stair Nosing for the environment:

BR M, BS8300 & BS5395

The slip resistance of the tread material used in a Stair Nosing is an important element for the safety and

performance of stairs. There are two traditional tests that can be carried out to determine the slip resistance

of a flooring material. The pendulum test (PTV) and a surface micro roughness measurement (Rz). Either of

these can be used to give an indication of the slip resistance of a material.

Quantum Flooring Solutions’ PVC tread material has been laboratory tested and has a PTV reading greater

than 36 and a micro roughness reading, taken off new and used treads, of >20 Rz in both wet and dry

conditions. Both these results classify the PVC tread material as being of a ‘low slip potential’ or risk.

D. The recommended coverage of the tread material on a Stair Nosing:

IP 15/06

The tread is the surface of the Stair Nosing which receives ascending or descending footfall. The Stair

Nosing tread material should extend to the front edge to the point at which it meets the vertical face to

minimise the risk of a slip in descent. Every profile within the Quantum Flooring Solutions' Q-Range of Stair

Nosings meets this point of guidance.

E. The recommended warning for an approaches to stairs:

BR M and BS8300

Corduroy tactiles should be installed as a hazard warning surface at the top and bottom approaches to

stairs, which will warn pedestrians that they are approaching steps. Quantum Flooring Solutions offers

corduroy tactile tiles in 4 different colours (see page 57).

(Note: Current best practice is that this guidance generally applies to approaches to external stairs).

F. Other considerations:

There are a number of other considerations for steps and Stair Nosings that should be born in mind when

looking to create safe stairs that achieves good practice guidelines.

I. Bull nose steps: These can create a trip hazard to partially sighted users, who use their foot to find the

nose of the step in ascent.

II. Open riser steps: These again create a trip hazard and it is not possible to get a LRV contrast on

the open riser.

III. Shiny metal Stair Nosing: These can create glare in artificial or direct sunlight.

IV. Double channel Stair Nosings: Technically they are too wide to meet the 50–65 mm Building Regulation

guidance, however, if there is a wide going on the tread and heavy foot traffic, double channel Stair

Nosings can be applied as long as a clear ladder effect is still created and the stair is safe.

Throughout this guide the products that can be used to ensure best BR/BS/BRE

practice can be identified by the Building Regulations Best Practice logo.

6

HOW TO SPECIFY THE CORRECT STAIR NOSINGIn order to select the correct Stair Nosing for steps the following questions need to be answered:

1. What floorcovering is being installed?

This will determine the gauge (thickness) of the Stair Nosing to be specified. A vinyl or lino floorcovering will

require a slimmer gauge of Stair Nosing than a carpet or carpet tile. Respectively Quantum Flooring Solutions

Stair Nosings designated S Range (Slenderline) and H Range (Heavy Duty) cover these differences in gauge.

Within the S Ranges of Stair Nosings there are also profiles with Ramped Back (R) edges to accommodate the

situations where no floorcovering is used on stairs.

Use our product selector to help find the correct Stair Nosing

quantumprofilesystems.com/en/brands/quantum/easy-product-search

2. What shape is the step on the stairs?

To narrow down the choice further the shape or profile of the nose of the steps should be identified. The main

choices are Flat (Straight), Rake and Bull Nose. After the range code (i.e. S or H) the following letter will show if

the Stair Nosings is Flat (F), Raked (R) or Bull Nosed (B). There is also a Chevron (C) option, which is a universal

profile that will fit on most step types.

VINYL

SLENDERLINE S-RANGE (SF1)

CONCRETE / NO COVERING

SLENDERLINE RAMPED BACK (SF125R)

CARPET

HEAVY DUTY H-RANGE (HF1)

FLAT

Q-RANGE FLAT (QR-SF1)

BULL NOSE

Q-RANGE BULL NOSED (QR-SB136)

RAKE

Q-RANGE RAKED (QR-SR1)

FLAT

Q-RANGE CHEVRON (QR-SC140)

BULL NOSE


RAKE


7

3. What Stair Nosing tread style is required?

There are three tread options from which to choose:

This is the format (specified in

IP15/03) where the tread material

extends across the full upper

surface of the Stair Nosing, which

provides improved slip-resistant

foot contact (particularly in decent).

The Quantum Flooring Solutions'

Stair Nosings in the Q-Range have

a patented design (GB2479135B)

that meets this guideline.

This is the industry standard

all-purpose format used in light

to medium foot traffic conditions.

Heavily trafficked stairs with

wide goings can be made safer

with this option. The Stair Nosing

dimensions are greater than

guidelines set out in Building

Regulations, however, the main

criteria should be that there is

a ladder effect created on the

stairs and that the stair is safe.

4. What kind of environment is the Stair Nosing going to be installed in?

Quantum Flooring Solutions offers tread materials for every environment:

A specially formulated grade of

PVC with good slip resistance

in wet and dry conditions and

long wear characteristic used for

internal applications.

A heavy duty silicon carbide

material with good slip resistance

qualities. Internal use is an option,

however it is ideally suited for

external applications, and it is also

available with a photoluminescent

choice, which gives visibility to

steps in darkened environments –

internally or externally.

5. Do the stairs need to meet best practice guidelines?

If you need a Stair Nosing to meet the guidelines laid out in the section

‘Stairway Specification and Building Regulations’ (pages 4–5) look out for

the Building Regulations Best Practice logo throughout this guide for

Stair Nosings that meet the guidelines.

SF1

SF125R with EGLO-52 tread

QR-SF1

SF125R

STANDARD SINGLE CHANNEL

ECOGLO

ALL OVER TREAD

STANDARD GRIP

DOUBLE CHANNEL

SF226L

8

HOW TO SPECIFY SAFE STAIRS

Quantum Flooring Solutions is a member of the

UK Slip Resistance Group (UKSRG), and has been

involved with the development of a working paper

on how to make stairs safe (which can be downloaded

at quantumprofilesystems.com/uksrg).

This page gives an overview of the key areas for consideration in the specification of safe stairs:

Step Dimensions: Consistency of step dimensions and step widths of over 300 mm will greatly

increase stair safety.

Stair Nosings: Details can be found in the ‘Stairway Specification and Building Regulations’

section of this document.

Handrails: Should ideally be on both sides, between 900 to 1000 mm from the ground,

continuous and offer a profile that can be ‘power gripped’.

Lighting: There should be a minimum of 100 lux of light on a stair, with switches or sensors

at the top and bottom of flights.

Cleaning: Should be conducted regularly and in line with manufacturers’ guidelines.

9

LIGHT REFLECTANCE VALUES & COLOUR OPTIONS Select the correct visual contrast (see page 4 for more information about LRVs).

STANDARD TREAD

6 Claret

6 Black

10 Rustic

10 Peat

11 Dark Blue

11 Regency

11 Spruce

11 Granite

13 Poppy

15 Flint

16 Royal Blue

21 Fawn

26 Light Grey

30 Jade

49 Polar Grey

51 Ivory

52 Sky

53 Lime

56 Sun

67 Yellow

69 Photo*

81 White

ECOGLO TREAD

5 Black

49 Yellow

69 Photo*

UPVC CHANNEL

6 Claret

6 Black

10 Rustic

10 Peat

11 Dark Blue

11 Regency

11 Spruce

11 Granite

15 Flint

26 Light Grey

49 Polar Grey

51 Ivory

67 Yellow

81 White

FLEXIBLE PVC STAIR NOSINGS

6 Black

7 Dark Brown

26 Light Grey

81 White

SKIRTINGS

6 Black

7 Dark Brown

11 Regency

11 Graphite

15 Charcoal

25 Boulder

29 Cloud Grey

31 Caramel

45 Platinum Grey

51 Ivory

81 White

CAPPING STRIPS

6 Black

7 Dark Brown

15 Charcoal

29 Cloud Grey

31 Caramel

81 White

TRIMS – TOPS

6 Black

7 Dark Brown

10 Rustic

11 Regency

11 Spruce

15 Dark Grey

26 Light Grey

TRIMS / RAMPS / BEVELS

6 Black

7 Dark Brown

15 Charcoal

29 Cloud Grey

81 White

STAIR NOSING TREAD

CHANNEL & FLEXIBLE NOSINGS PVC ACCESSORIES TRANSITIONS

KEY

6 Black

All LRV values have been verified by NCS UK Ltd.

* Photo = Photoluminescent

Some profile/colour combinations are subject to minimum order quantity. Please check prior to order.

LRV Colour name /description

OTHER LRVs

35

Standard Mill Finish Aluminium Carrier

57

Q-Range Satin Anodised Aluminium Carrier

Colours shown here are for guide purposes only and are as accurate as the printing process allows. Always request a sample for exact colour match.

10

SPECIFICATION SUPPORT

Quantum Flooring Solutions offers a full range of free technical support

to make sure that the correct product gets used for any given project including:

Product Show Cases: By invitation we can come to your offices and showcase our range of solutions for

your needs.

RIBA CPD: Book a CPD to be brought up-to-date with the latest rules and regulations.

Quantum Flooring Solutions’ CPD’s are available by appointment in your office or online.

Site Surveys and Measures: Ensure the right products at the right size are delivered to site through

our FREE on-site digital measuring service. For more information, see page 33.

24 hour samples: Request a sample by emailing: [email protected] for a same day

first class despatch.

Mobile Friendly Website: The Quantum Flooring Solution site is accessible on all devices:

quantumflooring.co.uk.

App: Out and about? Need a quick answer? Then download the Quantum Flooring

Solutions mobile app for the most up to date product information, by searching

“Quantum Flooring” in either the Apple or Android app stores.

11

STAIR NOSINGS

12

STAIR NOSINGS

FITTING RECOMMENDATIONS

» Fitting Guides are available on page 34.

» QuantumProfileSystemsLtddoesnotendorsetheuseofanyothermanufacturersadhesivetapefromanysourceforusewiththeirstairnosinginfilltreads.

i

TECHNICAL DATA SHEETS DOWNLOADS

bit.ly/1NiVGIj

13

STAIR NOSINGS – TECHNICAL INFORMATION

Product Composition

Carrier: Aluminium alloy or

uPVC

Tread: Polyvinylchloride (PVC) or

Silicon Carbide

Throughout this guide the products that

can be used to ensure best BR/BS/BRE

practice can be identified by the

Building Regulations Best Practice logo.

Safety Data

Please review ‘Safety Data Sheet – Aluminium Stair Nosing’ available at quantumflooring.co.uk/downloads

Slip Resistance

Treads have been tested independently by Grip Potential Ltd. Using the pendulum test (BS7976-2 Test Certificate) adhering to

UKSRG, HSE and CIRIA guidelines on pedestrian slip risk assessment.

These tests confirm that all Quantum Flooring Solutions treads exceed the minimum guidelines ex-works for floorcoverings in

wet and dry conditions as per BS8300:2009 and HSE Publications.

Maintenance

1. Clean aluminium carrier with a mild detergent solution then wipe with a clean dry cloth.

2. Clean tread with a mild detergent solution using a scouring pad to remove any heavy soiling.

Dry off if necessary with lint free cloth. Do not open to traffic whilst wet!

Allied Products

Stair Edging Trims – pre-formed universal angles for finishing step sides on open string stairs:

UTA and UTP Stair Angles (see page 30).

Nap Trims – for use in conjunction with heavy duty Stair Nosings when they are installed with thicker

gauge carpets: HG1 (see page 23).

Warranty

Quantum Flooring Solutions warrants that all Stair Nosings produced and despatched from its works in Oldham, Lancashire, UK

are free from material defects and are fit for purpose when fitted strictly in accordance with the manufacturer’s instructions.

This warranty is applicable to Quantum Stair Nosings that have been correctly specified, installed and maintained. Company

leaflets, brochures and data sheets (hard copy and online) are available, and these give details of all necessary and relevant

requirements.

Generally it is expected that Stair Nosings will outlast the surrounding floorcovering used on the treads of steps. However,

this warranty does not cover general wear and tear of the products that will be consistent with the foot traffic levels of the

installation. Also the company will not be held liable for any damage caused by vandalism or misuse of the products arising

from acts of omission, negligence or any failure by the end user.

Full terms and conditions are available on request.

14

TECHNICAL

DATA SHEET

DOWNLOAD

Q-RANGE

THE COMPLETE STAIR NOSING SOLUTION

The Q-Range offers a selection of 21 special profiles. The unique Stair Nosing

design is suitable for installation in all categories of public and commercial

buildings. The new Quantum Flooring Solutions patented all over tread design,

which provides a slip resistant surface from the nose to the back edge, gives

the benefit of extra safety when ascending or descending stairs. Also, the

satin etched aluminium riser surface provides the double benefit of being

scratch resistant and it inhibits the potential for ‘glare’, which is one of the

requirements of the latest BS8300:2008 and Building Regulation* guidelines

applicable to stairs in areas of Public Access (see page 4–5 for further details).

PRODUCT INFORMATION

Composition

» PVC tread material with satin etched aluminium or uPVC riser.

Environment

» Interior dry conditions.

Colour Range

» Available with all Quantum Flooring Solutions’ tread (infill) colours (see page 9).

Compatibility

» Range available from no floorcovering to 7 mm carpet.

Installation

» The product is installed using conventional methods (see page 34).

» Can be used alongside Quantum Flooring Solutions’ existing trims and angles.

» Supported by the unique FREE QSMS measuring service (see page 33).

* Building Regulation best practice solution when specified with polar grey tread material or uPVC.

SUPPORT & TECHNICAL ADVICE

» QSMS – Quantum Specialist Measuring Service, an on-site digital measuring service for fast, FREE and accurate measurements. See page 33.

» Step Templating and Stair Nosing fabrication service – see page 32. PLEASE NOTE: Q-Range cannot be curved.

» Express sample request service.

» Technical advice on product selection and best practice fitting guidelines.

» For more information, call +44 (0) 161 627 4222 or try one of these:

Visit quantumflooring.co.uk for CAD drawings, Easy Product Selector and much more.

Download the FREE Quantum Flooring Solutions app for Android and iOS. bit.ly/1NiVLeQ

15Colours shown are for guide purposes only and are as accurate as the printing process allows. Always request a sample for exact colour match by emailing [email protected].

Q-RANGE / SLENDERLINE

CHANNEL / RISER

Satin anodised Aluminium

Unplasticised Poly-vinylchloride (uPVC)

uPVC

Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Flint

Light Grey

Polar Grey

Ivory

Yellow

White

TREAD Slip Resistant PVC

Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White

For full colour options including LRVs, see page 9.

60

3338

60

5651

56

55

51

2

55

3833

2

33

60

38

33

55

38

3

GAUGE To fit slim gauge floorcoverings between 0–3.5 mm.

TRIMS For further information on trims see page 31.

DIMENSIONS All 2D images are to scale with dimensions in mm. Products subject to minor design alterations from time to time.

RAMPED BACK NOSINGS (R) Where a Stair Nosing is being installed directly to the step, ramp back profiles do not present a trip hazard.

QR-SF1

QR-SF153

QRu-SF1

QR-SF125R

QR-SF153R

QRu-SF125R

Q-RANGE UK PATENT

GB24791358

i

16



DIMENSIONS All 2D images are to scale with dimensions in mm. Products subject to minor design alterations from time to time


33

60

38

41

60

36

45

60

40

55

3833

2

55

41

2

36

45

55

40

2

33

60

38

55

33

38

3

QR-SR1

QR-SB136

QR-SC140

QRu-SR1

QR-SR125R

QR-SB136R

QR-SC140R

QRu-SR125R

CHANNEL / RISER



uPVC

Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Flint

Light Grey

Polar Grey

Ivory

Yellow

White


Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White


Q-RANGE UK PATENT

GB24791358

i

Q-RANGE / SLENDERLINE


GAUGE To fit textured material floorcoverings between 4–7 mm.


DIMENSIONS All 2D images are to scale with dimensions in mm. Products subject to minor design alterations from time to time

55

42

36

5

4640

55

5

QR-HB136

QR-HC1

55

39

33

5

55

51

5

57

55

39

33

5

55

33

39

5

55

33

39

5

QR-HF1

QR-HF153

QRu-HF1

QR-HR1

QRu-HR1

17

5

HG1

38

HG1

NAP TRIM

CHANNEL / RISER



uPVC

Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Flint

Light Grey

Polar Grey

Ivory

Yellow

White


Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White


Q-RANGE UK PATENT

GB24791358

i

Q-RANGE / HEAVY DUTY

18

S-RANGE. THE SLENDERLINE RANGE.

Durable aluminium Stair Nosings designed for use in a wide range of

commercial and industrial applications where slim gauge floorcoverings

such as vinyl or lino are specified. Options of lipped and ramped back

edge profiles are safety features which reduce the risk of tripping –

useful in educational and healthcare locations.

FEATURES & BENEFITS

Well fitted Stair Nosings make stairs safe, durable and attractive.

» Slip resistant treads – make steps safer.

» Used with all gauges of vinyl and lino – protects the step edge and flooring material.

» Lipped and Ramped back edges – reduce risk of a trip hazard and lifting of flooring material.

» Profiles for all step nose shapes – correct shape for safe installations.

» Single or double tread channels – accommodates light or heavy foot traffic conditions.

» Trims and special fabrications – to finish off open string or special shaped stairs (see page 32).

» Quicksilver or anodised finishes – premium finishes for prestige installations (see page 32).

» Different fitting options (see page 34) – easy application and secret fix (no plugs) option available.

TECHNICAL

DATA SHEET

DOWNLOAD



» Step Templating and Stair Nosing fabrication service – for special step shapes such as curves. See page 32.





Download the FREE Quantum Flooring Solutions app for Android and iOS. bit.ly/1rsXTXt


S-RANGE




2528

68

2

30

63

26

56

57

53

2

4542

68

57

3329

2

2933

94

2

3229

90

RAMPED BACK NOSINGS (R)

Where a Stair Nosing is being installed directly to the step, ramp back profiles do not present a trip hazard.

LIPPED NOSINGS (L)

These overlap the floorcovering to prevent lifting at the back of the nosing.

i

SF1

SF153

SF160R

SF226L

SF225R

SF125R

SF126L

CHANNEL

Mill finished Aluminium

Also available where indicated in:

Quicksilver

Gold Anodised

TREAD Slip-resistant PVC

Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White

ECOGLO TREAD (for more info see page 30)

Black

Yellow

Photoluminescent


20

S-RANGE





LIPPED NOSINGS (L) These overlap the floorcovering to prevent lifting at the back of the nosing.

68

2825

2

63

3026

57

5653

2

68

4542

2

57

3329

SR1

SR153

SR160R

SR125R

SR126L

CHANNEL



Quicksilver

Gold Anodised


Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White


Black

Yellow

Photoluminescent



2933

94

2

3229

90

SR226L

SR225R

S-RANGE





LIPPED NOSINGS (L) These overlap the floorcovering to prevent lifting at the back of the nosing.

65

3936

2

88

2730

2

56

3027

2

SB1

SB136

SB2

CHANNEL



Quicksilver

Gold Anodised


Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White


Black

Yellow

Photoluminescent


22

H-RANGE. THE HEAVY DUTY RANGE.

Offering a thicker gauge than the S-Range, the H-Range of Stair Nosings

is available with durable aluminium carrier channel options. They can

be used in most commercial applications including offices, retail, leisure,

education and healthcare. Their thicker gauge enables them to be fitted

with a wide variety of textured floorcoverings, such as carpet and carpet

tiles from most leading manufacturers.

FEATURES & BENEFITS



» Fits with a wide range of textured flooring – protects the step edge and flooring material.




» Quicksilver or anodised finishes – premium finishes for prestige installations (see page page 32).


» Easy to clean – low maintenance.

TECHNICAL

DATA SHEET

DOWNLOAD








Download the FREE Quantum Flooring Solutions app for Android and iOS. bit.ly/1rsXUKY


H-RANGE

GAUGE To fit textured floorcoverings between 4–9 mm.



90

3429

5

5

58

59

53

59

5

3429

HF1

HF153

HF2

17

5

HG1

38

HG1

NAP TRIMS

Quantum Flooring Solutions offers Nap Trims (HG1) for use in conjunction with heavy duty Stair Nosings when they are installed with thicker gauge carpets e.g. Axminster. The trims are fitted to the back edge of the nosing and secure the carpet in place with a nap lock to provide a neat finish at the back edge.

Nap trims are available in aluminium (punched or unpunched). Installed over the back edge of the Stair Nosings the flange is compressed over the outer heavy duty floorcovering edge by placing a support fillet along the edge and tapping gently with rubber mallet to complete a neat and safe finish.

OPTION 1 – Nap Lock

OPTION 2 – No Nap Lock

CHANNEL



Quicksilver

Gold Anodised


Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White


Black

Yellow

Photoluminescent


NAP TRIM

24

2934

90

5

60

58

53

5

94

6055

5

59

3429

5

HR1

HR153

HC255

HR2




CHANNEL



Quicksilver

Gold Anodised


Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White


Black

Yellow

Photoluminescent


17

5

HG1

38

HG1

NAP TRIM

H-RANGE


6257

74

59

5

4035

67

5

100

4035

5

5

3529

64




HB1

HB2

HPB

HB157

CHANNEL




Quicksilver

Gold Anodised

uPVC

Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Flint

Light Grey

Polar Grey

Ivory

Yellow

White


Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White


Black

Yellow

Photoluminescent


17

5

HG1

38

HG1

NAP TRIM

H-RANGE

26

Z-RANGE

This special range of aluminium Stair Nosings comprises a selection

of popular cost effective profiles for a wide range of commercial

applications including offices, retail, leisure, education and healthcare.

This range has been developed to respond to the demand for a best

value solution for a competitive market place. Available with the full

choice of tread colours which can be found on page 9.

FEATURES & BENEFITS


» Best value – competitive.


» Available in (S) Slenderline and (H) Heavy Duty gauges – usable with any floorcovering type.



» Pre-packed box option – 15 x 1.2 m lengths for on-site trimming – least waste option.




TECHNICAL

DATA SHEET

DOWNLOAD








Download the FREE Quantum Flooring Solutions app for Android and iOS. bit.ly/1SIXqL1


Z-RANGE / SLENDERLINE & HEAVY DUTY

GAUGE To fit slim gauge floorcoverings between 2–3.5 mm and textured material from 4–7 mm.



3127

55

2

53

3227

5

3127

62

2

3227

60

5

2731

55

2

2732

53

5

2

82

2731

3127

82

2

LESS WASTE

All Z-Range profiles are available in pre-packed boxes for on-site trimming.

SAVE TIME

No need for pre-site measure.

i

ZF1

ZHF1

ZR2

ZF2

ZR1

ZHR1

ZB1

ZHB1

CHANNEL



Quicksilver

Gold Anodised


Claret

Black

Rustic

Peat

Dark Blue

Regency

Spruce

Granite

Poppy

Flint

Royal Blue

Fawn

Light Grey

Jade

Polar Grey

Ivory

Sky

Lime

Sun

Yellow

Photoluminescent

White


28

FLEXIBLE PVC RANGE

This selection of flexible PVC profiles can be used when a quick and/or

temporary fitting of a Stair Nosing is required. They are supplied pre-

boxed and are easily cut and trimmed on-site where they can be fitted

without waiting for fully cut and drilled measured Stair Nosings. They can

also be curved around gentle radii without templating, and are priced to

give good value. However, they do not have the durability of the more

rigid aluminium or uPVC based Stair Nosings, and are best used in light

trafficked conditions, or for short term applications. When used in light

foot trafficked conditions, selected flexible PVC Stair Nosings can also

offer Building Regulation best practice solutions. See pages 4–5 for

further information.

FEATURES & BENEFITS


» Same colour tread and riser – Building Regulations ‘best practice’ solution.

» Trimmed on-site – quick and easy installation for temporary or light trafficked applications.

» Good value – low cost option.

» Different gauges – for use with any floorcovering type.


» Pre-packed in boxes – 2 m lengths for on-site trimming.

» Easily installed with adhesive and no screws – saves time on-site.









Download the FREE Quantum Flooring Solutions app for Android and iOS.


FLEXIBLE PVC RANGE

GAUGE To fit gauge floorcoverings between 0–9 mm.



MATERIAL

Slip-resistant PVC

Black

Dark Brown

Light Grey

White


69

4338

3

43

49

75

71 4

53

2824

1

30

35

85

15

32

63

28

3

3640

79

41

88

2731

41

30

38

73

8

ESN1

ESN3

ESN5

ESN9

ESN11

ESN13

ESN8

ESN7

PACKING SPEC:

2 m lengths only, packed 10 lengths per box. (ESN1 & ESN5 = 14 per box)

Longer lengths available on request.

FLEXIBLE PVC STAIR NOSINGS CAN BE CURVED:

(PLEASE NOTE: This is dependent on the tightness of the curve, please call +44 (0) 161 627 4222 for more information).

THE RAKE BACKED FLEXIBLE PVC STAIR NOSINGS:

will also accommodate Flat (Straight) step profiles, as the flexible riser portion can be flexed to the straight position at the time of installation.

i

30

ECOGLO STAIR NOSING TREAD MATERIAL

DAY NIGHT

EXAMPLE SINGLE CHANNEL

ECOGLO 50 mm tread (EGLO-51) & SF125R

EXAMPLE SPECIFICATION STATEMENT

“Quantum Flooring Solutions SF125R Stair

Nosing with EGLO-51 tread.”

EXAMPLE DOUBLE CHANNEL

ECOGLO 37 mm tread (EGLO-33) & SF225R


“Quantum Flooring Solutions SF225R Stair

Nosing with EGLO-33 tread.”

PRODUCT 37 mm(for double channel)

50 mm(for single channel)

SLIP RESISTANT

PHOTOLUMINESCENT & BLACKEGLO-31 EGLO-51

SLIP RESISTANT

PHOTOLUMINESCENT & YELLOWEGLO-32 EGLO-52

SLIP RESISTANT

BLACKEGLO-33 EGLO-53

SLIP RESISTANT

YELLOWEGLO-34 EGLO-54

SLIP RESISTANT

PHOTOLUMINESCENTEGLO-35 EGLO-55

The Ecoglo tread material option offers an innovative solution to stair safety. In areas of reduced light, Ecoglo tread will

illuminate the step edge using a unique photoluminescent material. The photoluminescent strip is combined with a silicon

carbide band to increase slip resistance.

The photoluminescent strip can be charged by both natural and artificial light so is suitable for both internal and external

installations. More information is available at: quantumflooring.co.uk/ecoglo

A highly durable, photoluminescent and slip resistant tread option, available across most of the Quantum Flooring Solutions

Stair Nosing range*.

KEY FEATURES

» Reduces slips and falls by improving step

edge contrast in all light conditions.

» Internal and external applications.

» Highly durable.

» Improved accessibility.

» UV resistant.

» Provides 24 hour visibility.

» Cost effective, low maintenance solution.

» Fail safe solution for health and safety

requirements.

» Recharged through exposure to light.

» Available with most Quantum Flooring

Solutions Stair Nosings*.

» Has been specified worldwide.

* Not available on Q-Range Stair Nosings

Colours shown here are for guide purposes only and are as accurate as the printing process allows. For an exact match to requirements please always request a sample.

31

STAIR EDGING TRIMSAlso known as ‘angles’ stair edging trims are essential in providing a safe and aesthetically pleasing finish to the sides of steps

on open string stairs. When installed they conceal the open edge of the floorcovering and Stair Nosing from view.

Quantum Flooring Solutions offers 2 stair edging trim options in Aluminium or uPVC. Each is available in pre-formed angles of 90°

for straight steps and 83° for rake back steps. The trims are installed using positioning tabs (supplied) that can accommodate the

relevant thickness of the floorcovering on the stair. Trims are also available in longer lengths, for installation on landings.

TREADSTEPSIntegrated step inserts create slip resistant, easy clean tread zones when set or cast into terrazzo, granolithic, marble, wood or concrete stair

cases, ramps and floors. Treadsteps are manufactured from a rubber composition which has slip resistant and hard wearing properties.

They can be set in position at the time of casting, bonded into pre-cut groves in the tread surface with adhesive or screwed into position

in groves cut into the nose of steps. In all instances the finished Treadstep should be ground to be flush with the tread surface.

SHAPE WIDTH THICKNESS COLOURS13 mm 25 mm 38 mm 50 mm 63 mm 75 mm

STRAIGHTLL13 LL25 LL38 LL50 LL63 LL75 8 mm

Black

Grey

SLANTED- SS25 SS38 SS50 SS63 SS75 8 mm

Black

Grey

BULL NOSE- BB25 BB38 BB50 BB63 BB75 8 mm

Black

Grey

DISC- DC25 DC38 DC50 - - 8 mm

Black

Grey

FINISHED LOOK ANGLES TABS OPTIONS

UTA

ALUMINIUM

Boxes 20 x 90° angles

Boxes 20 x 83° angles

✓

✓

UTP

PVCSingle angles

Stock Lengths 2.75 m

✓

✓

TAB2 for 5mmTAB2 reverse for 8mm

TAB1 for 3.5mmTAB1 reverse for 9.5mm

20

20

3

UTA UTP

35

BT

42

32

4

3.53.5

3.5



20

20

3

UTA UTP

35

BT

42

32

4

3.53.5

3.5



20

20

3

UTA UTP

35

BT

42

32

4

3.53.5

3.5TAB2 for 5mmTAB2 reverse for 8mm


20

20

3

UTA UTP

35

BT

42

32

4

3.53.5

3.5

83°/90°

ANGLE

TAB

360

360

360

R3

83°

360

R3

90°

360

360

360

R3

83°

360

R3

90°

FOR FLAT FRONT

FOR RAKE BACK

32

STAIR NOSING FABRICATIONInevitably not every step that needs a Stair Nosing will be straight or enclosed. For this reason Quantum Flooring Solutions is

able to provide bespoke Stair Nosings fabricated in the QPSL factory to individual templates that have been measured and

taken on-site. This templating service is free as part of the QSMS Measuring Service (see page 33).

MITRED STAIR NOSINGS

Most Stair Nosings can be mitred to suit any angle. They can either be

dry mitred, meaning just cut to fit or the Stair Nosing can be mitred and

then welded together for extra safety.

CURVED STAIR NOSINGS

Curved Stair Nosings are fabricated from templates taken from steps

on-site. Then factory made to template and delivered labelled and ready

to trim and fit on-site.

STANDARD – MILL FINISH

The standard Stair Nosings are supplied with mill finish.

STAIR NOSING FINISHES

QUICKSILVER – POLISHED FINISH

Quicksilver is a prestige chrome effect finish to aluminium Stair Nosings.

Available with most Stair Nosings, this process produces a premium

appearance.

GOLD ANODISED – BRASS OR BRONZE EFFECT FINISH

Anodising is available on Z, H and S Range aluminium profiles. An

anodised finish allows a prestige finish at a fraction of the cost of actual

bronze or brass Stair Nosings.

BESPOKE FINISHES (subject to minimum order quantities)

On most aluminium profiles Quantum Flooring Solutions are able to

provide anodising in a number of different colours, so you can have

the colour you want for your project. A wide selection of colours are

available, subject to minimum order quantities.

Colours shown here are for guide purposes only and are as accurate as the printing process allows. For an exact match to requirements please always request a sample.

33

FREE STAIR NOSING MEASURESSave time and money with Quantum Flooring Solutions revolutionary free Stair Nosing measuring service, QSMS.

Get Stair Nosings ready to fit within 24 hours of a measure being completed.

Book a FREE Stair Nosing measure today with Quantum Flooring Solutions

Quantum Flooring Solutions aim to complete the measure as soon as the stair case is ready to measure.

Call today on 0161 627 4222 to book an appointment.

How does Quantum Flooring Solutions’ free measure service work?

Why use Quantum Flooring Solutions’ free measure service?

2.

TRANSFERInformation

transferred via

Bluetooth link to

Quantum App.

1.

MEASURECompleted accurately

and error free by a

Quantum Surveyor

with an electronic

laser device.

3.

MEASURE SHEETProfessional

measure sheet

automatically

generated.

4.

DELIVERYContractor receives

measure sheet by

email/fax within 1 hr

ready to place order.

5.

STAIR NOSINGSReady to fit

Stair Nosings are

cut and delivered

to site.

24hr measure service –

faster delivery of Stair Nosings.

All Quantum Site Surveyors are CSCS

approved.

Each Stair Nosing can be labelled

with it's respective step number.

Neat and tidy measure sheets,

reduce risk of measurement errors.

Stair Nosings are delivered to site

ready to fit.

By saving time and waste.

SAVES TIME SAVES WASTE SAVES MONEY

34

INSTALLATION OPTIONS

1

When on-site, check step measurements with cut Stair Nosing supplied. Trim if required. Prepare step edge surfaces. They must be clean, smooth and clear of debris.

1

When on-site, check step measurements with cut Stair Nosing supplied. Trim if required. Prepare step edge surfaces. They must be clean, smooth and clear of debris.

3

Fit riser floorcovering if applicable.

Apply adhesive to Stair Nosing and tread as per the manufacturers’ instructions.

3

Fit riser floorcovering if applicable.

Apply adhesive to Stair Nosing and tread as per the manufacturers’ instructions.

4

Starting with the first Nosing on the top step, press down and screw into position, then continue down the stairs.(1” number 6 screws are recommended).

4

Starting with the first Nosing on the top step, press down and screw into position, then continue down the stairs.(1” number 6 screws are recommended).

Then fill in the drill holes with plugs.

5

Trim tread material lengths to respective Stair Nosing width. Working a step at a time from the top of the stair downwards, peel off release paper from adhesive in channel(s).

6

Apply tread material into channel – start at one end and carefully roll into channel to expel air. Trim end of tread material if necessary. Apply pressure using a hand roller to ensure adequate bond.

STANDARD FIXING (Drill & Plugged Stair Nosings)

SECRET FIXING (Drill & No Plug Stair Nosings) – available on Z, H and S Ranges

2

For stone or concrete steps mark screw locations on each tread (3 per step is recommended, or approximately one hole every 300 mm and 75 mm from each edge). Drill and plug screw holes.

2

For stone or concrete steps mark screw locations on each tread (3 per step is recommended, or approximately one hole every 300 mm and 75 mm from each edge). Drill and plug screw holes.

Quantum Profile Systems Ltd does not endorse the use of any other manufacturers adhesive tape from any source for use with their stair nosing infill treads.

See page 67 for example specification statements.

35

PVC ACCESSORIES

36

PVC FLOORING ACCESSORIES FOR COMMERCIAL & PUBLIC BUILDINGS


» All PVC products should be applied with a double stick contact adhesive from a leading supplier.

» Ensure the surfaces are clean, dry, smooth and free from grease or dust.

» Primethewalls/floorsfirst.

» Follow the manufacturers instructions for the application of the adhesive very carefully.

» Allow the PVC products to acclimatise to room temperature prior to installation.

For further fitting guidelines, see following product pages.

i

TECHNICAL DATA SHEET DOWNLOAD

bit.ly/24lWQu8

37

NEW – WET ROOM ACCESSORIES SOLUTION

Fit the floormitres in internal

and external corners

Fit wall covering and pull

tight and flat around external

corners.

Fit the Cove former (QCF35)

on floor and internal

verticals. Use EFA75 for

external verticals if required.

Use either QT100 or QT200, depending

on thickness of wall covering, to allow for

joints to be made between two coverings.

Walls and floor coverings in wet rooms need to be

well sealed and finished at the edges, corners and

joints between walls and floors.

Quantum Flooring Solutions offers the specifier

and contractor a package of PVC accessories that

give a clean, hygienic and sealed finish to edges

in wet rooms

Internal / External Mitres

CCTM1

CCFM2

Floor and Internal Verticals

QCF35

External Verticals

EFA75

Joints between the Floor Vinyl and Wall Covering

QT200 = floor vinyl to wall covering

QT100 = wall covering to wall covering

i

25

2

QT200

15

1

QT100

EXAMPLE

SPECIFICATION STATEMENT

“Quantum Flooring Wet Room Accessories Solutions, fix to walls and floor with a water based contact adhesive in accordance with manufacturer’s instructions.”

35

35

75

75

EFA75

1

4

2 3

38




» Post application cleaning recommendations


FLEXIBLE PVC SIT-ON SKIRTINGS

Installed on top of the flooring this range of flexible skirtings offers

easy to fit options to cover the join between wall and floor. Generally

Sit-On Skirtings are used with hard floorcoverings such as vinyl and lino,

and typical application areas include schools and public buildings.

They are available in a number of different sizes and the colour choice

can be seen on page 9.

The Q60 SO and Q100 SO profiles are available in 32 m coils which

enable on-site trimming and a reduction in the number of joins along a

corridor length.

FEATURES & BENEFITS

» Hides join between the wall and floor – clean finish and no unsightly gaps.

» Trimmed on-site – quick and easy installation.

» Good value – low cost option.

» Hard wearing – does not need replacement if well maintained.

» Easy to clean.



Apply the adhesive to the wall and top part of the

Sit-On Skirting only. These skirtings are applied after

the floorcovering is laid, as the foot of the skirting is not

glued to, but sits on top of the floorcovering beneath.


FLEXIBLE PVC SIT-ON SKIRTINGS

23

23

100

19

100

150

19

50

19

60

19

50

75

19

LENGTHS Profiles are supplied in 2 m lengths for on-site trimming. Q100 SO (formerly EC5) and Q60 SO (formerly EC6) also available in 32 m coils.

PACKING SPECS For full format and packing specifications see page 66.


Q100 SO (formerly EC5) also available as QZ100 SO in pre-packed boxes (Black only).

i

Q150 SO

Q100 SOC

Q100 SO

Q75 SO

Q60 SO

Q60 SOC

Q50 SO

EC15

MATERIAL

Polyvinylchloride (PVC)

COLOURS

Black

Dark Brown

Regency

Graphite

Charcoal

Boulder

Cloud Grey

Caramel

Platinum Grey

Ivory

White


40






FLEXIBLE PVC SET-IN SKIRTINGS

Set-In Skirtings also cover up the join between floor and wall, but

have the additional feature of being welded to the vinyl or lino flooring

material. The sealed join ensures that they can be used in areas which

are often wet through cleaning, and the weld also inhibits bacterial

growth. Consequently Set–In Skirtings are typically to be found in

hospitals, clinics and schools. They are available in a number of different

sizes and the colour choice can be seen on pages 9.

Weld Rod in 80 m coils is a available in a range of complementary

colours – see opposite page for details.

FEATURES & BENEFITS


» Welded join between skirting and flooring – waterproof and inhibits bacterial growth.



» Easy to clean.



WELD

Apply the adhesive to the wall/floor and to the back and

base of the skirting. These skirtings are fitted before the

floorcovering is laid so that they can be sealed or seam

welded flush with it.


WELDROD

LENGTHS Profiles are supplied in 2 m lengths for on-site trimming. Q100 50 2 SI (formerly EC14) also available in 16 m coils.



To accommodate different thicknesses of flooring material, some Set-In Skirtings are available with different foot thicknesses.

Q100 50 2 SI (formerly EC14) is available with a 2 mm, 2.5 mm or 3.2 mm foot.

Also available as QZ100 50 2 SI (formerly ZEC14) in pre-packed boxes (Black only).

Q150 50 2 SI (formerly EC8) is available with a 2 mm or 2.5 mm foot.

i

100

50

2

100

50

2

150

50

2

Available Weldrod colours to match PVC skirting – see page 9.

4 mm PVC Weld Rod is available in 80 m coils for use with set-in skirtings. Details on request.

BLACK CLOUD GREY

ARCTIC BLUE

LIGHT BUFF

WHITECHARCOAL REGENCY PLATINUM GREY

FLEXIBLE PVC SET-IN SKIRTINGS

Q150 50 2 SI

Q100 50 2 SI

Q100 50 2 SIC

MATERIAL


COLOURS

Black

Dark Brown

Regency

Graphite

Charcoal

Boulder

Cloud Grey

Caramel

Platinum Grey

Ivory

White


42






FLAT SKIRTINGS & BUFFER STRIPS

These versatile FlatSkirtingsandBufferStrips protect the base of

walls and doors in a wide range of internal applications. They are easy

and flexible to install and are an alternative to timber skirting. Cleaned

regularly, they need no maintenance or painting. They are available in a

number of different sizes and the colour choice can be seen on page 9.

FEATURES & BENEFITS




» Easy to clean.

» No overlap with flooring – can be applied with all categories of floorcovering.

» Can also be applied to doors – protects door bases from shoe marks.



Apply the adhesive to the wall and back of the Flat

Skirting. Flat Skirtings can be applied before or after the

floorcovering is laid. Suitable for use as buffer strips, wall protection, plinth and stage

bases, stair stringers etc.


FLAT SKIRTINGS & BUFFER STRIPS

LENGTHS Flat Skirtings and Buffer Strips are supplied in coils of either 16 m (EB12) or 32 m (EB1, EB3 and EB4). Corner Profiles are supplied in 2 m (EFA75) or 25 m lengths (QFA20).



300

50

100

150

75

75

40

CORNER PROFILES

EB12 EB4 EB3 EB1

EFA75CORNER BUFFER

QFA20FLEXIBLE ANGLE PROFILE

NEW

The corner buffer is used on wall corners underneath the wall covering material to prevent damage. Particularly applicable to wet room solutions see page 37.

They can also be used on the nose of steps underneath waterfall carpets, again to reduce damage and wear.

! PLEASE NOTE !

It's use as a Stair Nosing is not recommended.

i

MATERIAL


COLOURS

Black

Dark Brown

Regency

Graphite

Charcoal

Boulder

Cloud Grey

Caramel

Platinum Grey

Ivory

White


44






COVE FORMERS & CAPPING STRIPS

These profiles are used in conjunction with each other to allow for the

floorcovering to be continued up the wall for a neat and clean finish in wet and

sanitised areas. The Cove Former is installed at the junction between the wall

and the floor. This creates a hidden curved support for the floorcovering as it is

formed over the junction and up the wall. A capping strip is installed where the

floorcovering ends, providing a neat and sealed finish to the installation.

Capping Strips are available in flexible PVC and also rigid uPVC, enabling

them to be fitted with a wide range of floorcovering gauges. They are

available in a number of colours to compliment floorcovering colour options.

A Combined Cove–Capping profile (CCF1) offers a good value option for

this traditional specified finish.

FEATURES & BENEFITS

» Prevents damage to floorcovering at junction between floor and wall.

» Use QCF45 for a large radius curve – prevents accumulation of dirt.

» Capping Strips hide edge of flooring – neat finish conceals any uneven trimming.

» Capping Strips seal the join – inhibits collection of dirt and bacteria.

» Flexible PVC – can be curved and accommodates uneven surfaces.

» Easy to clean – low maintenance.» Combined Cove-Capping (CCF1) – saves fitting

time and gives a constant height.



Apply the adhesive to the

wall/floor and the back and

base of the cove former.

Carefully mark the position

of the capping strip and apply

the adhesive to the wall and the back of the

capping strip and fit.

For the combined

capping strip/cove former,

apply the adhesive to the

wall/floor and the back/base

of the product. Stick into

position and then apply the

floorcovering.


COVE FORMERS & CAPPING STRIPS

MATERIAL

Flexible Products – Polyvinylchloride (PVC)

Rigid Products – Unplasticised Polyvinylchloride (uPVC)

COLOURS

Cove Formers

Black

Capping Strips

Black

Dark Brown

Charcoal

Cloud Grey

Caramel

White




QCC1 also available as ZQCC1 in pre-packed boxes (black only).

UCS1 also available as ZUCS1 in pre-packed boxes (black only).

UCS2 is also available in 25 m coils.

i

100

32

20

2032

32

35

35

45

4

40

6

25

4

40

4

38

4

50

6

27

40

3

6

40

3

6

ECF2

ECF4

QCF35

CCF1

QCC1 UCS1

ECCS(rigid)

UCS2

QCT1(R)(rigid)

QCT1(F)(flexible)

QCC2(rigid)

QCC3ECS4

VIN

YLTI

LE

CARP

ET45

45

QCF45NEW

Floormitres

available,

see page 46

46

QUANTUM FLOORMITRES COVE & CAP SOLUTION

Install the preformed

seamless Internal and

External Floormitres.

Complete vinyl with smooth

radius and support for the

external and internal corners.

NOTE:

Vinyl can be wrapped as

shown in Step 5 or installed

by the conventional method.

EXAMPLE

SPECIFICATION STATEMENT

“Quantum Floormitre Cove and Cap Solution – QCF35, UCS1, CCFM1, CCFM2.”

Install Quantum Flooring Solutions’

Capping or Diminishing Strip

overlapping the Floormitres at

the external and internal points.

Install Quantum Flooring

Solutions cove former to the

Floormitres.

Prepared Floormitres are

ready for the installation

of vinyl.

The Internal (CCFM1) and External (CCFM2) Floormitres from Quantum Flooring

Solutions are designed to make the fitting of vinyl around corners easier, quicker

and smoother.

This unique flexible cove moulding creates a perfect uniform finish every time.*

» Eliminates creases and kinks

» Promotes uniformity

» Reduces fitting times

The preformed seamless Floormitre can be used with capping or diminishing strip at either 1OO or 150 mm construction industry standard heights.

CCFM1

CCFM2

REMEMBER...

...to specify your Floormitres with:

QCF35

UCS1 (ZUCS1)

i

35

35

QCF35

40

4

UCS1

1

4

2

5

3

* U

K Pa

tent

num

ber

GB2

5044

85

47

TRANSITIONS

48

TRANSITION TRIMS FOR COMMERCIAL & PUBLIC BUILDINGS


» All PVC products should be applied with a double stick contact adhesive from a leading supplier.

» Ensure the surfaces are clean, dry, smooth and free from grease or dust.

» Primethewalls/floorsfirst.

» Follow the manufacturers instructions for the application of the adhesive very carefully.

» Allow the PVC products to acclimatise to room temperature prior to installation.

For further fitting guidelines, see following product pages.

i

TECHNICAL DATA SHEET DOWNLOAD

bit.ly/1pXPfyW

49

TRANSITION SPECIFICATION

1. TYPES OF TRANSITION PROFILES

RAMP TRIMS and BEVEL STRIPS

Flexible edgings that help trim the edges and joins to vinyl floor coverings when they need to be finished off to a different

thickness.

COVER JOINTS, THRESHOLDS and TRIMS (inc. ‘TOPLINE’)

A selection of edgings that cover and protect joins and transitions in different floor coverings. They protect the joints and

also prevent worn and frayed floor covering edges from becoming a trip hazard.

2. SECTORS WHERE THEY CAN BE USED

These profiles from Quantum Flooring Solutions can be used effectively in many different sectors, including:

Residential Offices Healthcare Education

Retail Hotel & Leisure Public Sector Transport

3. HOW TO DECIDE WHICH TRANSITION IS RIGHT FOR A GIVEN LOCATION

The following pages show dimensioned cross sectional diagrams of the profiles available. The choice of which one to use

is determined by the types of floor covering which require a finishing edge. Colour options are available to complement

adjoining floor covering colours:

» Ramp Trims and Bevel Strips are used in conjunction with vinyl or lino flooring to finish off the edges to a sub-floor or

different level. Bevel strips can also be applied underneath the flooring edge to increase the gauge to an adjoining

material of a different thickness.

» Cover Joints are used to prevent damage to vinyl or lino flooring material in areas where there are joints in the sub-

floor. Cracking of the floor covering can be avoided by fixing a cover joint over and along the sub-floor joint and abutting/

welding the flooring material up to either side. Note: Cover Joints are not meant to act as expansion joints.

» Threshold Strips have a special use in wet room areas (see page 37) where they are applied underneath the flooring

material to create a barrier to water flow, for example, in entrances to shower units.

» Floor Trims are essential to create a neat and safe finish at floorcovering joints. They are very versatile and can

accommodate adjoining floor coverings of either the same or differing thicknesses. The flexible PVC trims (see page 53)

provide edges for carpet to carpet or carpet to vinyl joints, as do the mechanically (clip) fitted ‘Topline’ profiles (see page 55)

that offer durable options for a wider range of flooring transition gauges.

If assistance is required in the selection of a suitable transition profile for a given installation or application, technical support

is available from Quantum Flooring Solutions by contacting +44 (0) 161 627 4222 or [email protected].

4. SPECIFICATION STATEMENT EXAMPLE

“Finish of floor covering edges with Quantum Flooring PVC accessories (product code) with (colour). Fix using standard fixing

methods in accordance with the manufacturer's instructions.”

Specification assistance can also be found in the RIBA Product Selector and at RIBA F Plus.

50






FLEXIBLE PVC RAMP TRIMS & BEVEL STRIPS

Ramp Trims are used to take the edge of an installed floorcovering down to

the base residual flooring. They protect the floor material edge and reduce

the risk of the junction becoming a trip hazard.

Different ramp back heights accommodate a range of floorcovering gauges.

Bevel Strips are protective edge trims which help to create a safe transition

at floorcovering edges. When used underneath a flooring material they

increase the gauge to match up to an adjacent thicker material or accessory.

FEATURES & BENEFITS

» Creates bevelled or ramp edged finish to flooring – protects damage to flooring at junction.

» Mini ramp edge – reduces risk of tripping.

» Flexible PVC – can be curved on-site.


» Colour options (see page 9) – coordinates with flooring material.



Apply the adhesive to the floor, the edge of the floorcovering and the bottom of the bevel edge.

Apply the adhesive to the floor, the edge of the floorcovering and the bottom of the bevel edge.


FLEXIBLE PVC RAMP TRIMS



33

4.5

QFT450

38

6

QFT600

63

3

QMS1

70

10

QMS240

2.5

QMS3

33

4.5

QT450

38

6

QT600

QT450 QFT450

QT600

QMS1

QMS2

QMS3

QFT600

MATERIAL


COLOURS

Black

Dark Brown

Charcoal

Cloud Grey

White


FLEXIBLE PVC BEVEL STRIPS

25

2

QT200

50

2

QT200/50

25

2.5

QT250

25

3.2

QT320

25

4.5

QT450/25

QT200

QT250

QT320

QT450/25

QT200/50

52






COVER JOINTS, TRIMS & THRESHOLDS

PVC Cover Joints are positioned between vinyl edges where they

cover the joints in a subfloor to reduce the risk of the main floorcovering

cracking or splitting. They are not a full expansion joint, but they do help

to maintain and protect the floorcovering in a safe condition.

PVC Trims are single profiles that are secured to the residual floor and

adjoining floorcoverings are fixed in place up to either side of the profile.

The Quantum Flooring Solutions Shower Threshold is usually positioned

under the floorcovering at entrances to wet areas, providing an effective

barrier which reduces the escape of surface water from the area. Surface

fitting is also possible.

FEATURES & BENEFITS

» Effective trims to floorcovering edges – reduces the risk of tripping.

» Floorcovering joints are covered – helps prevent damage to flooring material.

» Different gauges available – suitable for most thicknesses of flooring material.

» Range of colours (see page 9) – trims coordinate with design schemes.

» PVC can be curved on-site – no templates required.

» Easy to fit – saves time



Apply adhesive to the floor and base of the profile. Fit the ‘thinner’ floorcovering under flap with foot/flange and the ‘thicker’ floorcovering on the other side.

Apply adhesive to the floor and base of the profile. Fit the floorcovering under flap with foot/flange, with ramp down to the other side.


COVER JOINTS, TRIMS & THRESHOLDS

FLOOR TRIMS

COVER JOINTS



50

2.5

QCJ50

75

2.5

QCJ75

35

5 9

QD35/535

7.511.5

QD35/7.5

40

5

QR40/520

46

7.5

QR46/7.5

QD35/5

QCJ50

QCJ75

QR40/5

QTR10

QD35/7.5

QR46/7.5

120

3

10

QTR10

SHOWER THRESHOLD

MATERIAL


COLOURS

Black

Dark Brown

Charcoal

Cloud Grey

White


The Shower Threshold can be used on top or underneath floorcovering.

i

Use Cover Joints to connect vinyl.

i

54






FLOOR TRIMS – 'TOPLINE'

The ‘Topline’ range from Quantum Flooring Solutions offers a floor trim

system suitable for installation in both contract and domestic locations.

The range includes a number of bases and top trim profiles to create a neat,

safe and durable junction between adjacent floor finishes. The different

sizes of bases and tops allow for almost all floorcovering thicknesses to be

accommodated, the tops are available in a range of 7 colours to compliment

any design scheme.

FEATURES & BENEFITS

» All tops fit all bases – versatile choice of applications.

» Co-extruded tops – slip resistant surface and high impact clip.

» Easy to install – time saving.

» Product combinations – all junction gauges accommodated.

» uPVC bases – can be curved on-site.

» Aluminium Base QAB2 – punched gripper option for carpets.


» Wide range of colours (see page 9 for options).



Screw the pre-drilled bases to the floor between the two floorcoverings.

Position the tops in place and tap into place using a rubber mallet.



MATERIAL

Flexible Products – Polyvinylchloride (PVC)

Rigid Products – Unplasticised Polyvinylchloride (uPVC)

QAB1 & QAB2 – Aluminium alloy

COLOURS

Tops

Black

Dark Brown

Rustic

Regency

Spruce

Dark Grey

Light Grey


PACKING SPECS For full format and packing specifications see page 66..


36

QTL36

42

QTR42

45

QTR45

6

QAB1

9

QAB2

8.5

QVB1

12

QVB4

16

QVB2

6

QVB3

QTL36

QTR42

QTR45

QVB1 QVB4QVB2 QVB3

QAB1 QAB2(punched or unpunched)

TOPS

BASES – uPVC

BASES – ALUMINIUM

'TOPLINE' CURVING GUIDE

Topline Transition profiles with uPVC bases (QVB1, QVB2, QVB3 or QVB4) can be curved

on-site down to a radius of approximately 750 mm depending on-site conditions.

Fix the base

First mark out the curve on the sub-floor then screw fix or pin one end of the transition

base (QVB1, QVB2, QVB3 or QVB4) to one end of the curve and carefully form it around the

desired shape. Screw fix or pin at regular intervals to hold the curved base up to the end.

Clip in the top

Once the base is in position, finish and trim the adjoining floor coverings up to its edge.

The Topline top can then be clipped into place, again by starting at one end and tapping it

into the base using a rubber mallet. Tap the top into the base in this manner all along the

curve, ensuring that it covers the adjoining floor coverings correctly, and that it is firmly in

position so that it does not ‘rock.’

NOTE: For tight curves it can help if a hot air gun is used to gently blow hot air onto the portion

to be curved. Care should be taken not to overheat the material as this can distort the profiles.

NEW

56


QVB3

QVB4

QAB1

QAB2

QVB2

QVB1

PRODUCT COMBINATIONS

The diagrams below show examples of the different combinations of 'Topline' Floor Trims and the floorcoverings they connect.

QTL36 QTR42 QTR45

8–10 mm 8–10 mm 8–10 mm8–10 mm 2 mm 0 mm

16–18 mm 14–16 mm 16–18 mm16–18 mm 10–12 mm 6–8 mm

8–10 mm

13–15 mm

5–7 mm

12–14 mm

5–7 mm

12–14 mm

10–12 mm

13–15 mm

5–7 mm

6 mm

2–4 mm

2–4 mm

7–9 mm 6–8 mm 6–8 mm7–9 mm 0 mm 0 mm

7–9 mm 6–8 mm 6–8 mm7–9 mm 0 mm 0 mm


CORDUROY TACTILES

Quantum Flooring Solutions tactiles are manufactured from a

mineral filled rubber elastomer to give high durability, abrasion and

skid resistance.

The tiles are 400 mm square and are suitable for both internal and

external applications. The corduroy tiles have a ribbed pattern to

Equality Act specifications to warn of a hazard requiring caution such

as steps or ramps. The surface should be laid so that the bars run

transversely across the direction of pedestrian travel. The corduroy tactile

should be a contrasting colour to the surrounding area.

INSTALLATION

The tiles can be installed onto most firm and clean surfaces using a good quality flooring adhesive. An epoxy flooring adhesive is recommended for most applications including fitting onto concrete, terrazzo and steel floors. Please refer to adhesive manufacturer’s instructions for further information. Tiles can be ‘set-into’ surrounding floor materials, or laid on top of an existing surface. In the latter case, the addition of a bevel trim around the edge of the tactile area is recommended.

Steps: The corduroy surface should extend across the full width of the stairs at both the top and bottom of the flight. Ribs must run across the direction of traffic on the stairs. The surface should start 400 mm from the first step. The tactiles should be laid to a depth of 800 mm and should extend at least 400 mm beyond the width of the steps on either side, if the stairs are not enclosed (see diagram above).

BUILDING REGULATIONS APPROVED

DOCUMENT M SECTION 1.33 STATES:

“A stepped access will satisfy requirement

M1 or M2 if (c) a corduroy (tactile) hazard

warning surface is provided at top and bottom

landings of a series of flights to give advance

warning of a change in level in accordance

with diagram 4”

Quantum Flooring Solutions corduroy

tactiles provide ‘good practice’ solutions to

the Department of Transport’s “Guidance

on the use of Tactile Paving Surfaces” and

the recommendations provided by the Joint

Mobility Unit and the Centre for the Accessible

Environment for the use of tactile surfaces to

warn visually impaired people of the presence

of specific hazards such as steps, level

crossings or the approach to on-street light

rapid transit (LRT) platforms. Tactiles convey

the message ‘hazard, proceed with caution’.

PLEASE NOTE: Best Practice now states

tactiles should only be used externally.

BLACK GREY

BUFF REGENCY

FEATURES & BENEFITS

» Satisfies the requirements for access and facilities for the disabled.

» Good anti-slip surface.

» Simple to install.

» Order Code: TCT400

» Colours: Black/ Grey/ Buff/ Regency

» Size: 400 x 400 mm

» Packing: 4 tiles per carton

» Material: Mineral filled rubber (moulded)

» Fitting: Adhesive

» Cleaning: Wipe with mild detergent and allow to dry before use.

58

MATTING SPECIFICATION AND BUILDING REGULATIONS

QUANTUM ENTRANCE MATTING

Quantum Flooring Solutions offers a range of entrance matting, which

can be ordered through Quantum Distributors. A free on-site measuring

service is available, which means that once a Quantum Entrance Mat is

specified, the product will be made to the correct size, and will fit when

delivered to site.

For more information, call +44 (0) 161 627 4222.

FEATURES & BENEFITS

» 5-year guarantee.

» Reduced cleaning cost.

» Significantly lowers the risk of slips, trips and falls.

» Simple to specify, NBS Plus details available.

» Rollable easy clean mats available.

» Virtually no landfill during the manufacturing process.

Industry research has shown that 94 % of all dirt that enters a building is brought in on the soles of shoes

or by wheeled traffic. This dirt creates a health and safety issue due to the increased risks of slips, trips or

falls. By specifying the correct type of entrance matting this risk can be significantly reduced.

“The entrance flooring system should scrape, wipe and retain soil, making

contact with both feet of people entering the building” – BS7953: 1999 part 5

“Buildings need to be easily accessible for all therefore mats should be

recessed where ever possible” – Equality Act 2010

“Entrance matting helps to drastically low slip risk” – BS7976-2

“HSE advises against loose lay mats as they cause a trip hazard” – HSE

Wellspecifiedandinstalledentrancematting will reduce the risk of Slips, Trips and Falls, and help to prolong thelifeoffloorcoveringsandthereforereduce associated maintenance costs.

NEW PRODUCTS


COLOURS AVAILABLE

FRAMES AVAILABLE

Recessed and ramped aluminium frames available to suit all situations.


“Quantum Flooring Solutions, Closed Matting, 12 mm, Textile Insert, Warm Black, recessed with frame to suit. The mat location

and size is to be measured by Quantum Flooring Solutions using their on-site measuring service.”

QUANTUM ENTRANCE MATTING NEW PRODUCTS

12 mm Closed

with rubber insert

17 mm Closed

with rubber insert

12 mm Closed

with textile insert

17 mm Closed

with textile insert

10 mm Open

with textile insert

10 mm Open

with ribbed rubber

17 mm Open

with textile insert

17 mm Open

with ribbed rubber

PROFILES AVAILABLE

Quantum Closed Matting – available in 12 mm &17 mm heights Quantum Open Matting – available in 10 mm & 17 mm

heights

Azure

Silver Grey

Ochre

Mouse Grey

Navy Blue

Anthracite

Spice Brown

Bronzetone

Taupe

Raven Black

Espresso

Warm Black

60

ACCESS EXPERTS

Quantum Flooring Solutions is involved with key access organisations in the UK

including the National Register of Access Consultants, Access Association and Centre for

Accessible Environments. This involvement includes presenting CPD content, supporting

events and giving guidance on product selection. Support services available include:

In-officeoronlineCPD: Learn how Stair Nosings help to make stairs safe and meet

Building Regulation guidelines.

To book call +44 (0) 161 622 7444 or email [email protected].

Research & White Papers: Visit quantumflooring.co.uk for access to all the latest industry research.

UK SLIP RESISTANCE GROUPwww.ukslipresistance.org.uk

What Makes Stairs Safer?

An overview of key aspects for safe internal stairs

APRIL 2016

The UK’s independent authority on slip resistance

SpecificationSupport: Need advice on access? Give us a call and we can help find the answers to the

questions you may have. Call on +44 (0) 161 622 7444.

Quantum Flooring Solutions believe in developing solutions rather than just selling products. Therefore, we’ll be

able to help answer any access related questions you may have. We also have access to a substantial range of

access and fire safety products for larger projects, such as the full Ecoglo product range.

Quantum Flooring Solutions works to support:

61

A HELPING HAND FROM QUANTUM FLOORING SOLUTIONS

Design Service: With an in-house design and tooling resource Quantum Flooring Solutions is able

to offer a bespoke profile service that can produce floor trim products to provide

individual solutions for which, along with a bespoke colour matching service,

minimum order quantities may apply.

To find out more email [email protected].

Quantum Flooring Solutions App: Quantum Flooring Solutions is proud to be the first flooring accessories manufacturer to

release an app which is designed to assist both Flooring Contractors and Specifiers. The

app includes a product selector functionality and can be downloaded from both the

iTunes App Store and the Android App Store.

Just search for ‘Quantum Flooring’ in either store.

Product Show Case: An informal opportunity for us to come and show our product range to you, we’ll

be able to help with any project related questions.

To book call +44 (0) 161 622 7444 or email [email protected].

62

TESTING

1) SLIP RESISTANCE TESTS

Tread Material Example Environment Slip

Resistance (PTV Values)

Stair Nosing Ranges

Standard

Grip

PVC

SF125R

Interior Dry Low / Medium

traffic

62+ Dry

45+ Wet

Q, Z, S & H

EcoGlo Silicon

Carbide SF125R with EGLO-51 tread

Interior /

Exterior

Dry /

Wet

Heavy traffic 76+ Dry

67+ Wet

S & H

Treads tested independently by Grip Potential Ltd. Using the pendulum test (BS7976-2 Test Certificate)

adhering to UKSRG, HSE and CIRIA guidelines on pedestrian slip risk assessment.

2) PHOTOLUMINESCENT PROPERTIES TESTS

Product TestActivation

TimeHours of Visibility

Standard

Photoluminescent tread

Fluorescent charging of

Standard Photoluminescent Material

30 minutes 1 hour

In a reasonably lit area (150 lux, 4000K)

EcoGlo

Photoluminescent tread

Fluorescent charging of

Ecoglo Material

30 minutes 7 hours

In a reasonably lit area (150 lux, 4000K)

3) LRV COLOUR TESTS

All LRV values have been independently verified by NCS UK Limited. Quantum Flooring Solutions offers a

selection of tread and Stair Nosing colours with LRVs ranging from black at 5 to white at 81.

4) OTHER TESTING

Quantum Flooring Solutions are continually testing their products. If there is a particular test you require,

it is likely we have completed it. For more information call +44 (0) 161 622 7444 or email

[email protected].

63

SUSTAINABILITY

Environmental Policy Statement

Quantum Profile Systems Ltd is based at Salmon Fields, Royton, Oldham. The company manufactures a

range of products from polyvinyl chloride (PVC) and aluminium for use in the construction industry. The key

manufacturing process is the extrusion of PVC.

The company recognises that its processes and products impact on the environment so is committed to

improve its performance through the implementation of an Environmental Management System. This system

will provide continual improvement and prevention of pollution. It is the policy of the company to take such

actions as are relevant and practical in order to protect the Environment. The Environment includes the

atmosphere, land, water, people, plants and animals. In order to achieve this ambition the company shall:

» Have an effective Environmental Management System that implements all policies and procedures

associated with environmental and related issues.

» Endeavour to minimise any adverse impact on the Environment by giving careful consideration to the total

life impact of all materials used.

» Regularly review and establish environmental objectives and targets for the reduction in the use of energy and resources.

» Implement waste reduction and material recycling programmes.

» Comply with all applicable legal requirements and other requirements to which the organisation subscribes.

» Communicate this policy to all personnel, suppliers, customers and neighbours and take into account any

concerns from interested parties.

» Ensure that all employees are aware of this policy and are trained in their environmental responsibilities.

BREEAM and LEED

BREEAM (Building Research Establishment Environmental Assessment Methodology), first published by the

Building Research Establishment (BRE) in 1990, is the world’s longest established method of assessing, rating, and

certifying the sustainability of buildings.

According to the BRE, Stair Nosings and Flooring Accessories do not gain credits under the Green Guide Specification,

since they do not enhance any of the categories within the BREEAM Scheme. However, in the context of sustainable

construction in the wider sense, specifiers are becoming increasingly more ‘green’ conscious and do refer to measures

such as global warming potential, water extraction, waste and ozone depletion when making product selection.

Consequently, leading manufacturers such as Quantum Flooring Solutions are taking steps to profile their products

against these measures, whether or not they have an impact on BREEAM ratings, and are working to ensure Lean

and environmentally sustainable processes are applicable to their products.

LEED (Leadership in Energy and Environmental Design) is a green building certification that originated from the

United States identical to the BREEAM system in the UK. It grew from one standard for new construction to a comprehensive

system of interrelated standards covering aspects from the design and construction to the maintenance and operation

of buildings since its start in the year 1994. By now LEED is one of the most popular green building certification

programs used worldwide. The Architects’ Journal states in one of their articles (28/02/2013) that “New research by the

Architects Journal shows the LEED sustainable building certification system dominates everywhere except in the UK”.

Both systems aim to ensure an environmentally friendly and sustainable approach for new builds and refurbishments.

REACH

REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) is an EC Regulation that

has direct effect in the UK. It came into force on 1 June 2007 and replaced a number of European Directives

and Regulations with a single system for registering, evaluating, authorizing and restricting chemicals. All QPSL

products meet and comply with the latest REACH guidelines.

64

The flooring accessory products available from Quantum Flooring Solutions have been

designed to be used over a complete cross section of building sectors. The list of sectors

below is indicative of the versatility of the profiles that can meet the requirements of so

many different installations. In some cases specialised profiles meet specific sector needs

(e.g. ramped or lipped back stair nosings in Healthcare or Educational environments).

RESIDENTIAL

TRANSPORT

OFFICES

HEALTHCARE

EDUCATION

RETAIL

HOTEL & LEISURE

PUBLIC SECTOR

SECTOR SOLUTIONS

This guide shows the full range of accessory

products on offer for all sectors, however if

technical advice is required for any specific

application then free assistance is available from:

quantumflooring.co.uk

Or by contacting:

[email protected].

65

SUPPORTED BY:

PROUD TO BE A BRITISH MANUFACTURER:

INTERNATIONAL & EXPORT

Quantum Flooring Solutions' products have been installed in many world class

international projects, including major airports, sports grounds around the world

and offices used by blue chip companies.

HOW WE WORK:

» International samples and support

» Specification guidance

» Partnerships to make sure product is delivered on time

NEXT STEPS?

» Help with a specification?

» Become an international partner?

» Locate a local Distributor?

» Request a sample?

Call +44 (0) 161 627 4222

or email [email protected]

INTERNATIONAL PROJECTS

PUBLIC SECTOR

TRANSPORT

RESIDENTIAL

HOTEL & LEISURE

HEALTHCARE

EDUCATION

American Embassy, Doha, Qatar

Barwa Al Khor Housing Development, Qatar

Normandy Barrière Hotel, France

Kuwait International Airport, Kuwait

Aspetar Hospital Refurbishment, Qatar

Qatar Music Academy, Qatar

66

PACKING SPECIFICATIONS


STAIR NOSINGS

TRANSITIONS

CODE PACKING SPEC CODE PACKING SPEC CODE PACKING SPEC

CCFM1 50 Q150 SO [EC9] 20 x 2 m QT50/55 (Contact Tape) 4 x 50 m

CCFM2 50 Q100 50 2 SI [EC14 (2 mm)] 14 x 2 m QT50/85 (Contact Tape) 3 x 50 m

CCF1 20 x 2 m Q100 50 2 SIC (as above Coiled) 1 x 16 m coil QZ100 SO [ZEC5] 30 x 2 m

EB1 2 x 32 m coils Q100 50 2.5 SI [EC14 (2.5 mm)] 14 x 2 m QZ100 SOC (as above Coiled) 32 m coil

EB3 32 m coil Q100 50 2.5 SIC (as above Coiled) 1 x 16 m coil QZ100 50 2 SI [ZEC14 (2 mm)] 14 x 2 m

EB4 32 m coil Q100 50 3.2 SI [EC14 (3.2 mm)] 14 x 2 m QZ100 50 2 SIC (as above Coiled) 1 x 16 m coil

EB12 16 m coil Q150 50 2 SI [EC8 (2 mm)] 14 x 2 m QZ100 50 2.5 SI [ZEC14 (2.5 mm)] 14 x 2 m

EC15 40 x 2 m Q150 50 2.5 SI [EC8 (2.5 mm)] 14 x 2 m QZ100 50 2.5 SIC (as above Coiled) 1 x 16 m coil

ECCS 20 x 2 m QCC1 40 x 2 m QZ100 50 3.2 SI [ZEC14 (3.2 mm)] 14 x 2 m

ECF2 50 x 2 m QCC2 30 x 2 m TCT400 (5 day lead time) Boxes of 4

ECF4 40 x 2 m QCC3 50 x 2 m UCS1 40 x 2 m

ECS4 4 x 25 m coils QCF35 40 x 2 m UCS2 40 x 2 m

EFA75 10 x 2 m QCF45 NEW 40 x 2 m UCS2 (Coiled) 3 x 25 m coils

Q50 SO [EC1] 40 x 2 m QCT1 (Rigid) 50 x 2 m Weldrod (Coiled) 6 x 80 m coils

Q60 SOC [EC6 (Coiled)] 2 x 32 m coils QCT1 (Flexible) 50 x 2 m ZECF4 40 x 2 m

Q75 SO [EC3] 40 x 2 m QFA20 NEW 1 x 25 m ZQCC1 40 x 2 m

Q100 SO [EC5] 30 x 2 m QT50/15 (Contact Tape) 16 x 50 m ZUCS1 40 x 2 m

Q100 SOC (as above Coiled) 32 m coil QT50/25 (Contact Tape) 10 x 50 m

CODE PACKING SPEC CODE PACKING SPEC CODE PACKING SPEC

QAB1 10 x 2.75 m QMS2 10 x 2 m QT600 [QR38/6] 50 x 2 m

QAB2 (Punched) 10 x 2.75 m QMS3 3 x 25 m QTL36 10 x 2.75 m

QAB2 (Unpunched) 10 x 2.75 m QR40/5 25 x 2 m QTR10 5 x 2 m

QCJ50 3 x 15 m QR46/7.5 20 x 2 m QTR42 10 x 2.75 m

QCJ75 2 x 15 m QT200 [EBS1] 5 x 25 m QTR45 10 x 2.75 m

QD35/5 25 x 2 m QT200/50 [EBS4] 3 x 25 m QVB1 10 x 2.75 m

QD35/7.5 25 x 2 m QT250 [EBS2] 5 x 25 m QVB2 10 x 2.75 m

QFT450 [FR33/4.5] 50 x 2 m QT320 [EBS3] 5 x 25 m QVB3 10 x 2.75 m

QFT600 50 x 2 m QT450 [QR33/4.5] 50 x 2 m QVB4 NEW 10 x 2.75 m

QMS1 20 x 2 m QT450/25 [EBS5] 5 x 25 m TACTILES Boxes of 4 or singles

FORMAT STAIR NOSING RANGE STAIR NOSING MATERIAL

Q S H Z FLEXIBLE Alum uPVC

Cut to size

Stock lengths

Drilled & plugs

Undrilled

Pre-cut packs (15 x 1.22 m) n/a n/a n/a n/a

ACCESSORY PACKING SPEC

Angles (UTA / UTP) Boxes of 20 or singles

Treadsteps 2.7m stock length or cuts

QET50/35 (35 mm wide external Stair Nosing tread tape) 4 x 50 m rolls

QET50/48 (48 mm wide external Stair Nosing tread tape) 3 x 50 m rolls

QT100/35 (35 mm wide internal Stair Nosing tread tape) 4 x 100 m rolls

QT100/48 (48 mm wide internal Stair Nosing tread tape) 3 x 100 m rolls

Codes in brackets (e.g. [QR33/4.5] ) are former product codes.

67

EXAMPLE PRODUCT SPECIFICATION STATEMENTS

Q-RANGE STAIR NOSINGS

“Quantum Flooring Solutions Q-Range Stair Nosing (QR-...) with (colour) all over PVC tread material cut and

drilled to size. Install using standard fixing method in accordance with the manufacturer’s instructions.”

Additional option:

“Use Quantum Flooring Solutions’ QSMS free on-site measuring service to determine the Stair Nosing cut sizes

required.”

ALUMINIUM STAIR NOSING (S, H & Z)

“Quantum Flooring Solutions Aluminium Stair Nosing (product code) with (colour) PVC tread material cut and

drilled to size. Fix using standard/secret fixing method in accordance with the manufacturer’s instructions.”

Additional option:

“Use Quantum Flooring Solutions’ QSMS free on-site measuring service to determine the Stair Nosing cut sizes

required.”

PVC ACCESSORIES

“Quantum Flooring Solutions PVC accessories (product code) with (colour). Fix using standard fixing methods

in accordance with the manufacturer’s instructions.”

Full specifications for all of our Quantum Flooring Solutions’ products can be found on:

RIBA Product Selector and NBS Plus

bit.ly/1OcIv6z

68

SUBJECT INDEX

A

Access Experts ....................60App .................................. 10, 61Anodising ...............................32

B

Bevel Strips (Flexible PVC) ......................50Bespoke finishes ................32Brass effect ..........................32BREEAM .................................64Buffer Strips ................42–43Building Regulations ..........................................4–5, 57

C

Capping Strips ....................44Case Studies ..................... inside cover & 65Chrome effect .....................32Colours ................................ 4, 9Corduroy Tactiles ...............57Corner Profiles .....................43Corner Mitres .......................46Cove & Cap Solution .........46Cove Formers ......................44Cover Joints .........................52CPD ..........................................10Curved Stair Nosing .........32

D

Dacatie ......................................3

E

Ecoglo .......................7, 30, 62Entrance Matting ......58–59Environmental Policy Statement ............................64Example Specification Statements ..........................67Export ......................................65

F

Fabrication (Stair Nosing) .....................................................32Finishes (Stair Nosing) ....32Fitting (Stair Nosing) ........... 34Flat Skirtings ........................42Flexible PVC Stair Nosing ................28Floor Trims ............................52Floor Trims 'Topline' ............................................54–56Floormitres ...........................46

H

H-Range Stair Nosings ....22Help & Support ..................61

I

Installation options (Stair Nosing) ...................................34International ........................65

L

Lean ............................................3LEED ........................................64LRV ................................4, 9, 62

M

Matting ...........................58–59Measures (Stair Nosing) .....................................................33Mitred Stair Nosing ..........32

N

Nap Trims ..............................23

P

Packing Specifications ....66Photoluminescent Stair Nosing Tread .........7, 30, 62PVC Accessories ........35–46PVC Colours ..............................9

Q

Q-Range Stair Nosing .....14QLean Solutions.....................3QPSL ...........................................3QSMS .................................... 33Quicksilver ............................32Qwood .......................................3

R

Ramp Trims (Flexible PVC) ......................50REACH .....................................64

S

S-Range Stair Nosing ......18Samples .................................10Secret Fixing (Stair Nosing) .....................................................34Sector Solutions .................65Set-In Skirting (Flexible PVC) ......................40Shower Threshold .............52Sit-On Skirting (Flexible PVC) ......................38Skirtings ........................36–43Slip Resistance ............. 5, 62Specification Support ......10Specification – Safe Stairs .........................8Specification – Stair Nosing .................6–7Specification – Transitions .......................49Stair Edging Angles ..........31Stair Edging Trims .............31Stair Nosing Fabrication .....................................................32Stair Nosing Finishes .......32Stair Nosing Measures ...33Stair Nosings ..............11–34Stair Nosings Technical .....................................................13Stairway Specification ..................................................4–5Sustainability ......................63

T

Tactiles ............................. 5, 57Testing ....................................62'Topline' Floor Trims ..54–56'Topline' Curving Guide ......55Transitions ...................47–59Tread colours ..........................9Treadsteps Bull Nose ......31Treadsteps Discs ...............31Treadsteps Slanted ..........31Treadsteps Straight ..........31

U

Universal Stair Edging Trims ........................................31

W

Weldrod ..................................41Wet Room Accessories Solution ..................................37Why Quantum? .....................2

Z

Z-Range Stair Nosing ......26

69

PRODUCT INDEX

B

BB25 ................................... 31BB38 ................................... 31BB50 ................................... 31BB63 ................................... 31BB75 ................................... 31

C

CCF1 .................................... 45CCFM1................................. 46CCFM2................................. 46

D

DC25 ................................... 31DC38 ................................... 31DC50 ................................... 31

E

EB1 ....................................... 43EB12 .................................... 43EB3 ....................................... 43EB4 ....................................... 43EC15 .................................... 39ECCS .................................... 45ECF2 .................................... 45ECF4 .................................... 45ECS4 .................................... 45EFA75 .................................. 43EGLO-31 ............................ 30EGLO-32 ............................ 30EGLO-33 ............................ 30EGLO-34 ............................ 30EGLO-35 ............................ 30EGLO-36 ............................ 30EGLO-51 ............................ 30EGLO-52 ............................ 30EGLO-53 ............................ 30EGLO-54 ............................ 30EGLO-55 ............................ 30ESN1 .................................... 29ESN11 ................................. 29ESN13 ................................. 29ESN3 .................................... 29ESN5 .................................... 29ESN7 .................................... 29ESN8 .................................... 29ESN9 .................................... 29

H

HB1 ...................................... 25HB157................................. 25HB2 ...................................... 25HC255 ................................. 24HF1 ...................................... 23HF153 ................................. 23HF2 ...................................... 23HG1 ...................... 17, 23–25HR1 ...................................... 24HR153 ................................. 24HR2 ...................................... 24

L

LL13 .................................... 31LL25 .................................... 31LL38 .................................... 31LL50 .................................... 31LL63 .................................... 31LL75 .................................... 31

Q

Q100 50 2 SI ................... 41Q100 50 2 SIC ................ 41Q100 SO ............................ 39Q100 SOC ......................... 39Q150 50 2 SI ................... 41Q150 SO ............................ 39Q50 SO ............................... 39Q60 SO ............................... 39Q60 SOC ............................ 39Q75 SO ............................... 39QAB1 ........................... 55–56QAB2 ........................... 55–56QCC1 ................................... 45QCC2 ................................... 45QCC3 ................................... 45QCF35 ................................. 45QCF45 ................................. 45QCJ50 ................................. 53QCJ75 ................................. 53QCT1 (Flexible) ................ 45QCT1 (Rigid)...................... 45QD35/5 ............................... 53QD35/7.5 ........................... 53QFA20 ................................. 43QFT450 .............................. 51QFT600 .............................. 51QMS1 .................................. 51

QMS2 .................................. 51QMS3 .................................. 51QR40/5 ............................... 53QR46/7.5 ........................... 53QR-HB136 ......................... 17QR-HC1 ............................... 17QR-HF1 ............................... 17QR-HF153 ......................... 17QR-HR1 ............................... 17QR-SB136 ......................... 16QR-SB136R ....................... 16QR-SC140 ......................... 16QR-SC140R ....................... 16QR-SF1 ............................... 15QR-SF125R ....................... 15QR-SF153 .......................... 15QR-SF153R ....................... 15QR-SR1 ............................... 16QR-SR125R ....................... 16QRu-HF1 ............................ 17QRu-HR1 ............................ 17QRu-S125R ....................... 15QRu-SF1 ............................. 15QRu-SR1 ............................ 16QRu-SR125R .................... 16QT200 ................................. 51QT200/50 .......................... 51QT250 ................................. 51QT320 ................................. 51QT450 ................................. 51QT450/25 .......................... 51QT600 ................................. 51QTL36 ......................... 55–56QTR10 ................................. 53QTR42 ......................... 55–56QTR45 ......................... 55–56QVB1 ........................... 55–56QVB2 ........................... 55–56QVB3 ........................... 55–56QVB4 ........................... 55–56

S

SB1 ...................................... 21SB136 ................................. 21SB2 ...................................... 21SF1 ....................................... 19SF125R ............................... 19SF126L ............................... 19SF153 ................................. 19SF160R ............................... 19SF225R ............................... 19

SF226L ............................... 19SR1 ....................................... 20SR125R .............................. 20SR126L ............................... 20SR153 ................................. 20SR160R .............................. 20SR225R .............................. 20SR226L ............................... 20SS25 .................................... 31SS38 .................................... 31SS50 .................................... 31SS63 .................................... 31SS75 .................................... 31

T

TAB 1 ................................. 31TAB 2 ................................. 31TCT400 ............................... 57

U

UCS1 .................................... 45UCS2 .................................... 45UTA ..................................... 31UTP ..................................... 31

Z

ZB1 ....................................... 27ZF1 ....................................... 27ZF2 ....................................... 27ZHB1 .................................... 27ZHF1 .................................... 27ZHR1 .................................... 27ZR1 ....................................... 27ZR2 ....................................... 27

70

NOTES

71

NOTES

STAIR NOSINGS


PVC TRANSITION PROFILES

Details correct at time of publication but please visit the website for the latest product information.

QPSL Group strives for continuous improvement in our environmental, health and safety management systems and in the environmental quality of our products, processes and services.

LEAN, GREEN, SAFE & CLEANPART OF

Quantum Profile Systems LtdSalmon Fields, Royton, Oldham, OL2 6JG, UK

tel: +44 (0) 161 627 4222 fax: +44 (0) 161 627 4333

[email protected] quantumflooring.co.uk

FOR SALES & TECHNICAL SUPPORT CALL:

+44 (0) 161 627 4222

Documents

STAIR NOSINGS PVC ACCESSORIES & TRIMS TRANSITIONS SPECIFICATION GUIDE › img › quantum-specification... · 2016-11-16 · 6. Building Research Information Paper – IP15/03: Proprietary