Embed Size (px)
Citation preview
Spiral Duct
Spiral Ducting - 1.5m
Spiral Duct - 1.5m Length
Due to volatile steel prices at present our list prices are subject to change (Please contact us directlyfor prices particularly on 710mm dia and above)
Manufactured from light gauge galvanised mild steel.
Aslo available in 3m (delivery restirictions apply on 3m lengths)
Manufactured with an air tight lock-formed seam conforming to DW/144.
£12.01 – £166.36 (excl. VAT) (S-000-1.5)
S-100-1.5 £12.01 (excl. VAT) Spiral Diameter:100mm
S-125-1.5 £14.83 (excl. VAT) Spiral Diameter:125mm
S-150-1.5 £17.63 (excl. VAT) Spiral Diameter:150mm
S-160-1.5 £19.51 (excl. VAT) Spiral Diameter:160mm
S-180-1.5 £26.00 (excl. VAT) Spiral Diameter:180mm
S-200-1.5 £27.33 (excl. VAT) Spiral Diameter:200mm
S-224-1.5 £31.48 (excl. VAT) Spiral Diameter:224mm
S-250-1.5 £34.44 (excl. VAT) Spiral Diameter:250mm
S-300-1.5 £42.15 (excl. VAT) Spiral Diameter:300mm
S-315-1.5 £44.40 (excl. VAT) Spiral Diameter:315mm
S-355-1.5 £66.30 (excl. VAT) Spiral Diameter:355mm
S-400-1.5 £74.60 (excl. VAT) Spiral Diameter:400mm
S-450-1.5 £84.54 (excl. VAT) Spiral Diameter:450mm
S-500-1.5 £92.81 (excl. VAT) Spiral Diameter:500mm
Mechanical Air SuppliesLtd17th November 2021
Page 1 of 70
S-560-1.5 £104.43 (excl. VAT) Spiral Diameter:560mm
S-600-1.5 £129.46 (excl. VAT) Spiral Diameter:600mm
S-630-1.5 £138.29 (excl. VAT) Spiral Diameter:630mm
S-710-1.5 £166.36 (excl. VAT) Spiral Diameter:710mm
Spiral Diameter:100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 300mm, 315mm, 355mm, 400mm,450mm, 500mm, 560mm, 600mm, 630mm, 710mm
Spiral Duct -3mDue to volatile steel prices at present our list prices are subject to change (Please contact us directlyfor prices particularly on 710mm dia and above)
Please Note: 3m Spiral duct is only available for deliveries into all London boroughs and the South East home counties(Berkshire, Buckinghamshire, Essex, Hertfordshire, Kent, Surrey, and Sussex) .
Contact us for more information for deliveries that are required outside of our normal delivery areas.
£24.01 – £526.66 (excl. VAT) (S-000)
S-100 £24.01 (excl. VAT) Spiral Diameter:100mm
S-125 £29.64 (excl. VAT) Spiral Diameter:125mm
S-150 £35.24 (excl. VAT) Spiral Diameter:150mm
S-160 £39.03 (excl. VAT) Spiral Diameter:160mm
S-180 £51.99 (excl. VAT) Spiral Diameter:180mm
S-200 £54.65 (excl. VAT) Spiral Diameter:200mm
S-224 £62.95 (excl. VAT) Spiral Diameter:224mm
S-250 £68.88 (excl. VAT) Spiral Diameter:250mm
S-280 £81.38 (excl. VAT) Spiral Diameter:280mm
S-300 £84.30 (excl. VAT) Spiral Diameter:300mm
S-315 £88.80 (excl. VAT) Spiral Diameter:315mm
S-355 £132.59 (excl. VAT) Spiral Diameter:355mm
Mechanical Air SuppliesLtd17th November 2021
Page 2 of 70
S-400 £149.19 (excl. VAT) Spiral Diameter:400mm
S-450 £169.08 (excl. VAT) Spiral Diameter:450mm
S-500 £185.63 (excl. VAT) Spiral Diameter:500mm
S-560 £208.85 (excl. VAT) Spiral Diameter:560mm
S-600 £258.91 (excl. VAT) Spiral Diameter:600mm
S-630 £276.56 (excl. VAT) Spiral Diameter:630mm
S-710 £332.73 (excl. VAT) Spiral Diameter:710mm
S-800 £370.90 (excl. VAT) Spiral Diameter:800mm
S-900 £484.11 (excl. VAT) Spiral Diameter:900mm
S-1000 £526.66 (excl. VAT) Spiral Diameter:1000mm
Spiral Diameter:100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm, 500mm, 560mm, 600mm, 630mm, 710mm, 800mm, 900mm, 1000mm
Spiral Duct Bends
15 Degree Bends
15 Degree Galvanised Mild Steel Ducting Bends
Stocked sizes from 80mm - 1000mm diameter.
80 - 200mm are pressed bends.
224mm upwards are segmented bends.
£11.12 – £66.83 (excl. VAT) (B-15/600)
B-15/100 £11.12 (excl. VAT) Diameter of Bend:100mm
B-15/125 £12.62 (excl. VAT) Diameter of Bend:125mm
B-15/150 £16.95 (excl. VAT) Diameter of Bend:150mm
B-15/160 Diameter of Bend:160mm
Mechanical Air SuppliesLtd17th November 2021
Page 3 of 70
£16.95 (excl. VAT)
B-15/200 £19.81 (excl. VAT) Diameter of Bend:200mm
B-15/224 £21.64 (excl. VAT) Diameter of Bend:224mm
B-15/250 £20.00 (excl. VAT) Diameter of Bend:250mm
B-15/300 £22.77 (excl. VAT) Diameter of Bend:300mm
B-15/315 £23.05 (excl. VAT) Diameter of Bend:315mm
B-15/355 £30.87 (excl. VAT) Diameter of Bend:355mm
B-15/400 £33.29 (excl. VAT) Diameter of Bend:400mm
B-15/450 £51.87 (excl. VAT) Diameter of Bend:450mm
B-15/500 £47.70 (excl. VAT) Diameter of Bend:500mm
B-15/560 £59.03 (excl. VAT) Diameter of Bend:560mm
B-15/600 £66.83 (excl. VAT) Diameter of Bend:600mm
Diameter of Bend:100mm, 125mm, 150mm, 160mm, 200mm, 224mm, 250mm, 300mm, 315mm, 355mm, 400mm, 450mm,500mm, 560mm, 600mm
30 Degree Bends
30 Degree mild steel bend for duct
80-200mm diameter bends are pressed.
224mm diameter are segmented bends.
Manufactured in accordance with DW144 specifications.
£7.50 – £66.83 (excl. VAT) (B-30/100)
B-30/100 £7.50 (excl. VAT) Diameter of Bend:100mm
B-30/125 £8.92 (excl. VAT) Diameter of Bend:125mm
B-30/150 £12.25 (excl. VAT) Diameter of Bend:150mm
B-30/160 Diameter of Bend:160mm
Mechanical Air SuppliesLtd17th November 2021
Page 4 of 70
£12.74 (excl. VAT)
B-30/180 £17.85 (excl. VAT) Diameter of Bend:180mm
B-30/200 £17.85 (excl. VAT) Diameter of Bend:200mm
B-30/224 £17.87 (excl. VAT) Diameter of Bend:224mm
B-30/250 £17.87 (excl. VAT) Diameter of Bend:250mm
B-30/280 £22.53 (excl. VAT) Diameter of Bend:280mm
B-30/300 £22.77 (excl. VAT) Diameter of Bend:300mm
B-30/315 £23.30 (excl. VAT) Diameter of Bend:315mm
B-30/355 £33.74 (excl. VAT) Diameter of Bend:355mm
B-30/400 £35.49 (excl. VAT) Diameter of Bend:400mm
B-30/450 £51.87 (excl. VAT) Diameter of Bend:450mm
B-30/500 £47.70 (excl. VAT) Diameter of Bend:500mm
B-30/560 £62.82 (excl. VAT) Diameter of Bend:560mm
B-30/600 £66.83 (excl. VAT) Diameter of Bend:600mm
Diameter of Bend:100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm, 500mm, 560mm, 600mm
45 Degree Bends
45 degree pressed & segmented steel ventilation bends
Manufactured from galvanised mild steel in accordance with DW144 specifications.
80-200mm bends are pressed.
224mm and upwards are segmented bends.
Next day delivery available.
£5.58 – £396.96 (excl. VAT) (B-45/100)
B-45/80 £5.58 (excl. VAT) Diameter of Bend:80mm
B-45/100 Diameter of Bend:
Mechanical Air SuppliesLtd17th November 2021
Page 5 of 70
£5.58 (excl. VAT) 100mm
B-45/125 £6.69 (excl. VAT) Diameter of Bend:125mm
B-45/150 £7.89 (excl. VAT) Diameter of Bend:150mm
B-45/160 £8.74 (excl. VAT) Diameter of Bend:160mm
B-45/180 £11.34 (excl. VAT) Diameter of Bend:180mm
B-45/200 £11.34 (excl. VAT) Diameter of Bend:200mm
B-45/224 £19.15 (excl. VAT) Diameter of Bend:224mm
B-45/250 £19.15 (excl. VAT) Diameter of Bend:250mm
B-45/280 £24.30 (excl. VAT) Diameter of Bend:280mm
B-45/315 £27.04 (excl. VAT) Diameter of Bend:315mm
B-45/300 £24.30 (excl. VAT) Diameter of Bend:300mm
B-45/355 £30.05 (excl. VAT) Diameter of Bend:355mm
B-45/400 £47.52 (excl. VAT) Diameter of Bend:400mm
B-45/450 £49.24 (excl. VAT) Diameter of Bend:450mm
B-45/500 £64.40 (excl. VAT) Diameter of Bend:500mm
B-45/560 £77.41 (excl. VAT) Diameter of Bend:560mm
B-45/600 £90.17 (excl. VAT) Diameter of Bend:600mm
B-45/630 £97.37 (excl. VAT) Diameter of Bend:630mm
B-45/660 £152.25 (excl. VAT) Diameter of Bend:660mm
B-45/710 £152.25 (excl. VAT) Diameter of Bend:710mm
B-45/800 Diameter of Bend:800mm
Mechanical Air SuppliesLtd17th November 2021
Page 6 of 70
£226.92 (excl. VAT)
B-45/900 £268.73 (excl. VAT) Diameter of Bend:900mm
B-45/1000 £396.96 (excl. VAT) Diameter of Bend:1000mm
Diameter of Bend:80mm, 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm,355mm, 400mm, 450mm, 500mm, 560mm, 600mm, 630mm, 660mm, 710mm, 800mm, 900mm, 1000mm
60 Degree Bends
60 degree steel ducting bends
Full range of diameters from 80mm - 600mm.
80mm to 200mm are pressed bends.
224mm and above are segmented bends.
Next day delivery available on stocked diameters.
£10.07 – £140.62 (excl. VAT) (B-60/500)
B-60/100 £10.07 (excl. VAT) Diameter of Bend:100mm
B-60/125 £11.93 (excl. VAT) Diameter of Bend:125mm
B-60/150 £21.22 (excl. VAT) Diameter of Bend:150mm
B-60/160 £21.95 (excl. VAT) Diameter of Bend:160mm
B-60/180 £32.10 (excl. VAT) Diameter of Bend:180mm
B-60/200 £27.16 (excl. VAT) Diameter of Bend:200mm
B-60/224 £33.58 (excl. VAT) Diameter of Bend:224mm
B-60/250 £28.88 (excl. VAT) Diameter of Bend:250mm
B-60/280 £42.54 (excl. VAT) Diameter of Bend:280mm
B-60/300 £36.83 (excl. VAT) Diameter of Bend:300mm
B-60/315 £39.08 (excl. VAT) Diameter of Bend:315mm
B-60/355 £42.75 (excl. VAT) Diameter of Bend:355mm
B-60/400 Diameter of Bend:
Mechanical Air SuppliesLtd17th November 2021
Page 7 of 70
£62.32 (excl. VAT) 400mm
B-60/450 £78.26 (excl. VAT) Diameter of Bend:450mm
B-60/500 £90.46 (excl. VAT) Diameter of Bend:500mm
B-60/560 £128.34 (excl. VAT) Diameter of Bend:560mm
B-60/600 £140.62 (excl. VAT) Diameter of Bend:600mm
Diameter of Bend:100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm, 500mm, 560mm, 600mm
90 Degree Bends
90 Degree Mild Steel (Galvanised) Bend for Spiral Duct
80mm - 1000mm diameters available.
Large Stock on all diameters stocked.
Manufactured in accordance with DW144 specifications.
£7.23 – £636.15 (excl. VAT) (B-90/100)
B-90/80 £7.23 (excl. VAT) Diameter of Bend:80mm
B-90/100 £7.23 (excl. VAT) Diameter of Bend:100mm
B-90/125 £8.84 (excl. VAT) Diameter of Bend:125mm
B-90/150 £11.44 (excl. VAT) Diameter of Bend:150mm
B-90/160 £12.82 (excl. VAT) Diameter of Bend:160mm
B-90/180 £17.12 (excl. VAT) Diameter of Bend:180mm
B-90/200 £17.12 (excl. VAT) Diameter of Bend:200mm
B-90/224 £27.46 (excl. VAT) Diameter of Bend:224mm
B-90/250 £27.45 (excl. VAT) Diameter of Bend:250mm
B-90/280 £33.10 (excl. VAT) Diameter of Bend:280mm
B-90/300 Diameter of Bend:300mm
Mechanical Air SuppliesLtd17th November 2021
Page 8 of 70
£35.02 (excl. VAT)
B-90/315 £37.13 (excl. VAT) Diameter of Bend:315mm
B-90/355 £40.62 (excl. VAT) Diameter of Bend:355mm
B-90/400 £62.32 (excl. VAT) Diameter of Bend:400mm
B-90/450 £78.26 (excl. VAT) Diameter of Bend:450mm
B-90/500 £90.46 (excl. VAT) Diameter of Bend:500mm
B-90/560 £128.34 (excl. VAT) Diameter of Bend:560mm
B-90/600 £140.62 (excl. VAT) Diameter of Bend:600mm
B-90/630 £148.03 (excl. VAT) Diameter of Bend:630mm
B-90/660 £173.85 (excl. VAT) Diameter of Bend:660mm
B-90/710 £282.57 (excl. VAT) Diameter of Bend:710mm
B-90/800 £307.87 (excl. VAT) Diameter of Bend:800mm
B-90/900 £449.72 (excl. VAT) Diameter of Bend:900mm
B-90/1000 £636.15 (excl. VAT) Diameter of Bend:1000mm
Diameter of Bend:80mm, 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm,355mm, 400mm, 450mm, 500mm, 560mm, 600mm, 630mm, 660mm, 710mm, 800mm, 900mm, 1000mm
90 Degree Twin Bends£54.74 – £434.15 (excl. VAT) (TB-100)
TB-100 £54.74 (excl. VAT) Diameter:100mm
TB-125 £56.53 (excl. VAT) Diameter:125mm
TB-150 £91.61 (excl. VAT) Diameter:150mm
TB-200 £146.96 (excl. VAT) Diameter:200mm
TB-250 Diameter:250mm
Mechanical Air SuppliesLtd17th November 2021
Page 9 of 70
£152.34 (excl. VAT)
TB-300 £197.34 (excl. VAT) Diameter:300mm
TB-315 £208.20 (excl. VAT) Diameter:315mm
TB-355 £216.76 (excl. VAT) Diameter:355mm
TB-400 £243.25 (excl. VAT) Diameter:400mm
TB-450 £275.97 (excl. VAT) Diameter:450mm
TB-500 £347.44 (excl. VAT) Diameter:500mm
TB-560 £394.73 (excl. VAT) Diameter:560mm
TB-600 £434.15 (excl. VAT) Diameter:600mm
Diameter:100mm, 125mm, 150mm, 200mm, 250mm, 300mm, 315mm, 355mm, 400mm, 450mm, 500mm, 560mm, 600mm
Spigots, Shoes, Y Pieces & Tees
Flanged Spigot (IL) for Circular Spiral Ducting£2.53 – £29.54 (excl. VAT) (SP-100)
SP-80 £4.52 (excl. VAT) Diameter:80mm
SP-100 £2.53 (excl. VAT) Diameter:100mm
SP-125 £2.76 (excl. VAT) Diameter:125mm
SP-150 £2.92 (excl. VAT) Diameter:150mm
SP-160 £3.11 (excl. VAT) Diameter:160mm
SP-180 £3.78 (excl. VAT) Diameter:180mm
SP-200 £3.78 (excl. VAT) Diameter:200mm
SP-224 £4.82 (excl. VAT) Diameter:224mm
Mechanical Air SuppliesLtd17th November 2021
Page 10 of 70
SP-250 £4.82 (excl. VAT) Diameter:250mm
SP-280 £6.72 (excl. VAT) Diameter:280mm
SP-300 £6.72 (excl. VAT) Diameter:300mm
SP-315 £7.45 (excl. VAT) Diameter:315mm
SP-355 £8.66 (excl. VAT) Diameter:355mm
SP-400 £10.74 (excl. VAT) Diameter:400mm
SP-450 £12.56 (excl. VAT) Diameter:450mm
SP-500 £13.27 (excl. VAT) Diameter:500mm
SP-560 £13.67 (excl. VAT) Diameter:560mm
SP-600 £14.92 (excl. VAT) Diameter:600mm
SP-630 £14.92 (excl. VAT) Diameter:630mm
SP-710 £29.54 (excl. VAT) Diameter:710mm
SP-800 £29.54 (excl. VAT) Diameter:800mm
Diameter:80mm, 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm, 500mm, 560mm, 600mm, 630mm, 710mm, 800mm
Galvanised Flat ShoesFlat shoes to suit a range of circular duct diameters.
£15.87 – £152.38 (excl. VAT) (SH-100)
SH-80 £20.53 (excl. VAT) Diameter:80mm
SH-100 £15.87 (excl. VAT) Diameter:100mm
SH-125 £16.92 (excl. VAT) Diameter:125mm
SH-150 £19.49 (excl. VAT) Diameter:150mm
SH-160 Diameter:160mm
Mechanical Air SuppliesLtd17th November 2021
Page 11 of 70
£20.19 (excl. VAT)
SH-180 £24.05 (excl. VAT) Diameter:180mm
SH-200 £24.05 (excl. VAT) Diameter:200mm
SH-224 £29.51 (excl. VAT) Diameter:224mm
SH-250 £29.51 (excl. VAT) Diameter:250mm
SH-280 £36.86 (excl. VAT) Diameter:280mm
SH-300 £36.86 (excl. VAT) Diameter:300mm
SH-315 £38.32 (excl. VAT) Diameter:315mm
SH-355 £51.36 (excl. VAT) Diameter:355mm
SH-400 £54.28 (excl. VAT) Diameter:400mm
SH-450 £68.57 (excl. VAT) Diameter:450mm
SH-500 £82.48 (excl. VAT) Diameter:500mm
SH-560 £126.35 (excl. VAT) Diameter:560mm
SH-600 £139.06 (excl. VAT) Diameter:600mm
SH-630 £152.38 (excl. VAT) Diameter:630mm
Diameter:80mm, 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm, 500mm, 560mm, 600mm, 630mm
90 degree Equal Tee Pieces for Circular Spiral Ducting
Metal 90 degree equal Tee
90 degree equal Tee's for metal ductwork
£14.94 – £177.82 (excl. VAT) (T-100)
T-80 £18.84 (excl. VAT) Diameter:80mm
T-100 £14.94 (excl. VAT) Diameter:100mm
T-125 Diameter:
Mechanical Air SuppliesLtd17th November 2021
Page 12 of 70
£15.70 (excl. VAT) 125mm
T-150 £21.25 (excl. VAT) Diameter:150mm
T-160 £22.32 (excl. VAT) Diameter:160mm
T-180 £35.79 (excl. VAT) Diameter:180mm
T-200 £28.13 (excl. VAT) Diameter:200mm
T-224 £40.11 (excl. VAT) Diameter:224mm
T-250 £47.53 (excl. VAT) Diameter:250mm
T-280 £66.29 (excl. VAT) Diameter:280mm
T-300 £66.85 (excl. VAT) Diameter:300mm
T-315 £70.87 (excl. VAT) Diameter:315mm
T-355 £118.17 (excl. VAT) Diameter:355mm
T-400 £133.98 (excl. VAT) Diameter:400mm
T-450 £148.57 (excl. VAT) Diameter:450mm
T-500 £177.82 (excl. VAT) Diameter:500mm
Diameter:100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm, 500mm, 80mm
45 degree Y piece
45 degree Y piece
Equal diameters on all spigots
Galvanised mild steel.
Male spigots.
We can fabricate un-equal Y pieces.
£26.88 – £67.18 (excl. VAT) (Y-100)
Y-100 £26.88 (excl. VAT) Diameter:100mm
Mechanical Air SuppliesLtd17th November 2021
Page 13 of 70
Y-125 £28.37 (excl. VAT) Diameter:125mm
Y-150 £31.34 (excl. VAT) Diameter:150mm
Y-200 £35.82 (excl. VAT) Diameter:200mm
Y-250 £67.18 (excl. VAT) Diameter:250mm
Diameter:100mm, 125mm, 150mm, 200mm, 250mm
Concentric Reducers for Ventilation Duct
100mm to 80mm Reducer
100mm to 80mm Reducer for Metal Ducting
Reduce from 100mm Diameter to 80mm.
Galvanised metal reducer.
Male spigots on each end.
£7.73 (excl. VAT) (R-100-80)
125mm to 100mm Reducer
125mm to 100mm Reducer for Metal Ducting
Reduce from 125mm Diameter to 100mm
Galvanised metal reducer.
Male spigots on each end.
£7.73 (excl. VAT) (R-125-100)
150mm Reducers
150mm Reducers for Metal Ducting
Reduce from 150mm Diameter to 80mm, 100mm, 125mm
Galvanised metal reducer.
Male spigots on each end.
£7.73 – £13.09 (excl. VAT) (R-150-100)
R-150-80 £13.09 (excl. VAT) Reduce from::150mmReduce to::80mm
Mechanical Air SuppliesLtd17th November 2021
Page 14 of 70
R-150-100 £7.73 (excl. VAT) Reduce from::150mmReduce to::100mm
R-150-125 £7.73 (excl. VAT) Reduce from::150mmReduce to::125mm
Reduce from::150mmReduce to::80mm, 100mm, 125mm
160mm Reducers
160mm Reducers for Metal Ducting
Reduce from 160mm Diameter to 80mm, 100mm, 125mm &150mm.
Galvanised metal reducer.
Male spigots on each end.
£7.73 – £13.98 (excl. VAT) (R-160-100)
R-160-80 £13.98 (excl. VAT) Reduce from::160mmReduce to::80mm
R-160-100 £7.73 (excl. VAT) Reduce from::160mmReduce to::100mm
R-160-125 £7.73 (excl. VAT) Reduce from::160mmReduce to::125mm
R-160-150 £8.33 (excl. VAT) Reduce from::160mmReduce to::150mm
Reduce from::160mmReduce to::80mm, 100mm, 125mm, 150mm
180mm Reducers
180mm Reducers for Spiral tube
Reduce from 180mm Diameter to 100mm,125mm, 150mm or 160mm
Galvanised metal reducer.
Male spigots on each end.
£13.98 (excl. VAT) (R-180-100)
R-180-100 Reduce from::180mmReduce to::100mm
Mechanical Air SuppliesLtd17th November 2021
Page 15 of 70
R-180-125 Reduce from::180mmReduce to::125mm
R-180-150 Reduce from::180mmReduce to::150mm
R-180-160 Reduce from::180mmReduce to::160mm
Reduce from::180mmReduce to::100mm, 125mm, 150mm, 160mm
200mm Reducers
200mm Metal Duct Reducers
Reduce from 200mm Diameter to 100mm, 125mm, 150mm, 160mm & 180mm
Galvanised metal reducer.
Male spigots on each end.
£9.57 – £17.85 (excl. VAT) (R-200-100)
R-200-100 £9.57 (excl. VAT) Reduce from::200mmReduce to::100mm
R-200-125 £9.57 (excl. VAT) Reduce from::200mmReduce to::125mm
R-200-150 £9.57 (excl. VAT) Reduce from::200mmReduce to::150mm
R-200-160 £9.57 (excl. VAT) Reduce from::200mmReduce to::160mm
R-200-180 £17.85 (excl. VAT) Reduce from::200mmReduce to::180mm
Reduce from::200mmReduce to::100mm, 125mm, 150mm, 160mm, 180mm
Mechanical Air SuppliesLtd17th November 2021
Page 16 of 70
224mm Reducers
224mm Reducers for Metal Ducting
Reduce from 224mm Diameter to 100mm, 125mm, 150mm, 160mm, 180mm & 200mm
Galvanised metal reducer.
Male spigots on each end.
£15.33 – £27.24 (excl. VAT) (R-224-100)
R-224-100 £27.24 (excl. VAT) Reduce from::224mmReduce to::100mm
R-224-125 £27.24 (excl. VAT) Reduce from::224mmReduce to::125mm
R-224-150 £27.24 (excl. VAT) Reduce from::224mmReduce to::150mm
R-224-160 £27.24 (excl. VAT) Reduce from::224mmReduce to::160mm
R-224-180 £27.24 (excl. VAT) Reduce from::224mmReduce to::180mm
R-224-200 £15.33 (excl. VAT) Reduce from::224mmReduce to::200mm
Reduce from::224mmReduce to::100mm, 125mm, 150mm, 160mm, 180mm, 200mm
250mm Reducers
250mm Reducers for Metal Ducting
Reduce from 250mm Diameter to 100mm, 125mm, 150mm, 160mm, 180mm, 200mm & 224mm
Galvanised metal reducer.
Male spigots on each end.
£12.63 – £26.74 (excl. VAT) (R-250-100)
R-250-100 £26.74 (excl. VAT) Reduce from::250mmReduce to::100mm
R-250-125 Reduce from::
Mechanical Air SuppliesLtd17th November 2021
Page 17 of 70
£12.63 (excl. VAT) 250mmReduce to::125mm
R-250-150 £12.63 (excl. VAT) Reduce from::250mmReduce to::150mm
R-250-160 £12.63 (excl. VAT) Reduce from::250mmReduce to::160mm
R-250-180 £26.74 (excl. VAT) Reduce from::250mmReduce to::180mm
R-250-200 £12.63 (excl. VAT) Reduce from::250mmReduce to::200mm
R-250-224 £26.74 (excl. VAT) Reduce from::250mmReduce to::224mm
Reduce from::250mmReduce to::100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm
280mm Reducers
280mm Reducers for Metal Ducting
Reduce from 280mm Diameter to 125mm, 150mm, 160mm, 180mm, 200mm, 224mm & 250mm
Galvanised metal reducer.
Male spigots on each end.
£32.21 (excl. VAT) (R-280-125)
R-280-125 Reduce from::280mmReduce to::125mm
R-280-150 Reduce from::280mmReduce to::150mm
R-280-160 Reduce from::280mmReduce to::160mm
R-280-180 Reduce from::280mmReduce to::180mm
R-280-200 Reduce from::
Mechanical Air SuppliesLtd17th November 2021
Page 18 of 70
280mmReduce to::200mm
R-280-224 Reduce from::280mmReduce to::224mm
R-280-250 Reduce from::280mmReduce to::250mm
Reduce from::280mmReduce to::125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm
300mm Reducers for Spiral Ductwork
300mm Reducers for Metal Ducting
Reduce from 300mm Diameter to 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm & 280mm
Galvanised metal reducer.
Male spigots on each end.
£20.92 – £38.46 (excl. VAT) (R-300-125)
R-300-125 £38.46 (excl. VAT) Reduce from::300mmReduce to::125mm
R-300-150 £28.76 (excl. VAT) Reduce from::300mmReduce to::150mm
R-300-160 £38.46 (excl. VAT) Reduce from::300mmReduce to::160mm
R-300-180 £38.46 (excl. VAT) Reduce from::300mmReduce to::180mm
R-300-200 £20.92 (excl. VAT) Reduce from::300mmReduce to::200mm
R-300-224 £38.46 (excl. VAT) Reduce from::300mmReduce to::224mm
R-300-250 £20.92 (excl. VAT) Reduce from::300mmReduce to::250mm
R-300-280 Reduce from::
Mechanical Air SuppliesLtd17th November 2021
Page 19 of 70
£38.46 (excl. VAT) 300mmReduce to::280mm
Reduce from::300mmReduce to::125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm
315mm Reducers
315mm Reducers for Metal Ducting
Reduce from 315mm Diameter to 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm & 300mm
Galvanised metal reducer.
Male spigots on each end.
£21.67 – £38.46 (excl. VAT) (R-315-150)
R-315-150 £38.46 (excl. VAT) Reduce from::315mmReduce to::150mm
R-315-160 £34.96 (excl. VAT) Reduce from::315mmReduce to::160mm
R-315-180 £38.46 (excl. VAT) Reduce from::315mmReduce to::180mm
R-315-200 £21.67 (excl. VAT) Reduce from::315mmReduce to::200mm
R-315-224 £38.46 (excl. VAT) Reduce from::315mmReduce to::224mm
R-315-250 £21.67 (excl. VAT) Reduce from::315mmReduce to::250mm
R-315-280 £38.46 (excl. VAT) Reduce from::315mmReduce to::280mm
R-315-300 £22.62 (excl. VAT) Reduce from::315mmReduce to::300mm
Reduce from::315mmReduce to::150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm
Mechanical Air SuppliesLtd17th November 2021
Page 20 of 70
355mm Reducers
355mm Reducers for Metal Ducting
Reduce from 355mm Diameter to 150mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm & 315mm
Galvanised metal reducer.
Male spigots on each end.
£40.92 – £45.01 (excl. VAT) (R-355-150)
R-355-150 £45.01 (excl. VAT) Reduce from::355mmReduce to::150mm
R-355-180 £40.92 (excl. VAT) Reduce from::355mmReduce to::180mm
R-355-200 £40.92 (excl. VAT) Reduce from::355mmReduce to::200mm
R-355-224 £45.01 (excl. VAT) Reduce from::355mmReduce to::224mm
R-355-250 £40.92 (excl. VAT) Reduce from::355mmReduce to::250mm
R-355-280 £45.01 (excl. VAT) Reduce from::355mmReduce to::280mm
R-355-300 £40.92 (excl. VAT) Reduce from::355mmReduce to::300mm
R-355-315 £40.92 (excl. VAT) Reduce from::355mmReduce to::315mm
Reduce from::355mmReduce to::150mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm
Mechanical Air SuppliesLtd17th November 2021
Page 21 of 70
400mm Reducers
400mm Reducers for Metal Ducting
Reduce from 400mm Diameter to 150mm, 200mm, 224mm, 250mm, 300mm, 315mm & 355mm
Galvanised metal reducer.
Male spigots on each end.
£46.03 – £63.57 (excl. VAT) (R-400-150)
R-400-150 £63.57 (excl. VAT) Reduce from::400mmReduce to::150mm
R-400-200 £46.03 (excl. VAT) Reduce from::400mmReduce to::200mm
R-400-224 £50.62 (excl. VAT) Reduce from::400mmReduce to::224mm
R-400-250 £46.03 (excl. VAT) Reduce from::400mmReduce to::250mm
R-400-300 £46.03 (excl. VAT) Reduce from::400mmReduce to::300mm
R-400-315 £46.03 (excl. VAT) Reduce from::400mmReduce to::315mm
R-400-355 £46.03 (excl. VAT) Reduce from::400mmReduce to::355mm
Reduce from::400mmReduce to::150mm, 200mm, 224mm, 250mm, 300mm, 315mm, 355mm
450mm Reducers
450mm Reducers for Metal Ducting
Reduce from 450mm Diameter to 200mm, 250mm, 300mm, 315mm, 355mm & 400mm
Galvanised metal reducer.
Male spigots on each end.
£47.53 – £56.66 (excl. VAT) (R-450-200)
R-450-200 Reduce from::
Mechanical Air SuppliesLtd17th November 2021
Page 22 of 70
£56.66 (excl. VAT) 450mmReduce to::200mm
R-450-250 £47.53 (excl. VAT) Reduce from::450mmReduce to::250mm
R-450-300 £47.53 (excl. VAT) Reduce from::450mmReduce to::300mm
R-450-315 £47.53 (excl. VAT) Reduce from::450mmReduce to::315mm
R-450-355 £47.53 (excl. VAT) Reduce from::450mmReduce to::355mm
R-450-400 £47.53 (excl. VAT) Reduce from::450mmReduce to::400mm
Reduce from::450mmReduce to::200mm, 250mm, 300mm, 315mm, 355mm, 400mm
500mm Reducers
500mm Reducers for Metal Ducting
Reduce from 500mm Diameter to 200mm, 250mm, 300mm, 315mm, 355mm, 400mm & 450mm
Galvanised metal reducer.
Male spigots on each end.
£52.68 – £66.72 (excl. VAT) (R-500-200)
R-500-200 £66.72 (excl. VAT) Reduce from::500mmReduce to::200mm
R-500-250 £52.68 (excl. VAT) Reduce from::500mmReduce to::250mm
R-500-300 £52.68 (excl. VAT) Reduce from::500mmReduce to::300mm
R-500-315 £52.68 (excl. VAT) Reduce from::500mmReduce to::315mm
R-500-355 Reduce from::
Mechanical Air SuppliesLtd17th November 2021
Page 23 of 70
£57.95 (excl. VAT) 500mmReduce to::355mm
R-500-400 £52.68 (excl. VAT) Reduce from::500mmReduce to::400mm
R-500-450 £57.95 (excl. VAT) Reduce from::500mmReduce to::450mm
Reduce from::500mmReduce to::200mm, 250mm, 300mm, 315mm, 355mm, 400mm, 450mm
560mm Reducers
560mm Reducers for Metal Ducting
Reduce from 560mm Diameter to 250mm, 300mm, 315mm, 355mm, 400mm, 450mm & 500mm
Galvanised metal reducer.
Male spigots on each end.
£75.65 (excl. VAT) (R-560-250)
R-560-250 Reduce from::560mmReduce to::250mm
R-560-300 Reduce from::560mmReduce to::300mm
R-560-315 Reduce from::560mmReduce to::315mm
R-560-355 Reduce from::560mmReduce to::355mm
R-560-400 Reduce from::560mmReduce to::400mm
R-560-450 Reduce from::560mmReduce to::450mm
R-560-500 Reduce from::560mmReduce to::500mm
Mechanical Air SuppliesLtd17th November 2021
Page 24 of 70
Reduce from::560mmReduce to::250mm, 300mm, 315mm, 355mm, 400mm, 450mm, 500mm
600mm Reducers
600mm Reducers for Metal Ducting
Reduce from 600mm Diameter to 250mm, 300mm, 315mm, 355mm, 400mm, 450mm, 500mm & 560mm
Galvanised metal reducer.
Male spigots on each end.
£93.79 (excl. VAT) (R-600-250)
R-600-250 Reduce from::600mmReduce to::250mm
R-600-300 Reduce from::600mmReduce to::300mm
R-600-315 Reduce from::600mmReduce to::315mm
R-600-355 Reduce from::600mmReduce to::355mm
R-600-450 Reduce from::600mmReduce to::450mm
R-600-400 Reduce from::600mmReduce to::400mm
R-600-500 Reduce from::600mmReduce to::500mm
R-600-560 Reduce from::600mmReduce to::560mm
Reduce from::600mmReduce to::250mm, 300mm, 315mm, 355mm, 400mm, 450mm, 500mm, 560mm
Mechanical Air SuppliesLtd17th November 2021
Page 25 of 70
630mm Reducers
630mm Reducers for Metal Ducting
Reduce from 315mm Diameter to 300mm, 315mm, 355mm, 400mm, 450mm, 500mm, 560mm & 600mm
Galvanised metal reducer.
Male spigots on each end.
£93.79 (excl. VAT) (R-630-000)
R-630-300 Reduce from::630mmReduce to::300mm
R-630-315 Reduce from::630mmReduce to::315mm
R-630-355 Reduce from::630mmReduce to::355mm
R-630-400 Reduce from::630mmReduce to::400mm
R-630-450 Reduce from::630mmReduce to::450mm
R-630-500 Reduce from::630mmReduce to::500mm
R-630-560 Reduce from::630mmReduce to::560mm
R-630-600 Reduce from::630mmReduce to::600mm
Reduce from::630mmReduce to::300mm, 315mm, 355mm, 400mm, 450mm, 500mm, 560mm, 600mm
Mechanical Air SuppliesLtd17th November 2021
Page 26 of 70
710mm Reducers
710mm Reducers for Metal Ducting
Reduce from 710mm Diameter to 355mm, 400mm, 450mm, 500mm, 560mm & 630mm
Galvanised metal reducer.
Male spigots on each end.
£134.33 (excl. VAT) (R-710-000)
R-710-355 Reduce from::710mmReduce to::355mm
R-710-400 Reduce from::710mmReduce to::400mm
R-710-450 Reduce from::710mmReduce to::450mm
R-710-500 Reduce from::710mmReduce to::500mm
R-710-560 Reduce from::710mmReduce to::560mm
R-710-630 Reduce from::710mmReduce to::630mm
Reduce from::710mmReduce to::355mm, 400mm, 450mm, 500mm, 560mm, 630mm
800mm Reducers for Spiral Ductwork
800mm Reducers for Metal Ducting
Reduce from 800mm Diameter to 400mm, 450mm, 500mm, 560mm, 600mm, 630mm & 710mm
Galvanised metal reducer.
Male spigots on each end.
£156.76 (excl. VAT) (R-800-560)
R-800-400 Reduce from::800mmReduce to::400mm
R-800-450 Reduce from::
Mechanical Air SuppliesLtd17th November 2021
Page 27 of 70
800mmReduce to::450mm
R-800-500 Reduce from::800mmReduce to::500mm
R-800-560 Reduce from::800mmReduce to::560mm
R-800-600 Reduce from::800mmReduce to::600mm
R-800-630 Reduce from::800mmReduce to::630mm
R-800-710 Reduce from::800mmReduce to::710mm
Reduce from::800mmReduce to::400mm, 450mm, 500mm, 560mm, 600mm, 630mm, 710mm
HVAC Duct Branches
Curved Boots
100mm Curved Boots
Curved boots for 100mm diameter duct.
Branching onto 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224-250mm, 280-315mm & 355-400mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£20.18 (excl. VAT) (CB-100/100)
CB-100/100 Curved Boot (A Diameter):100mmCurved Boot (B Diameter):
Mechanical Air SuppliesLtd17th November 2021
Page 28 of 70
100mm
CB-100/125 Curved Boot (A Diameter):100mmCurved Boot (B Diameter):125mm
CB-100/150 Curved Boot (A Diameter):100mmCurved Boot (B Diameter):150mm
CB-100/160 Curved Boot (A Diameter):100mmCurved Boot (B Diameter):160mm
CB-100/180 Curved Boot (A Diameter):100mmCurved Boot (B Diameter):180mm
CB-100/200 Curved Boot (A Diameter):100mmCurved Boot (B Diameter):200mm
CB-100/250 Curved Boot (A Diameter):100mmCurved Boot (B Diameter):224-250mm
CB-100/300 Curved Boot (A Diameter):100mmCurved Boot (B Diameter):280-315mm
CB-100/400 Curved Boot (A Diameter):100mmCurved Boot (B Diameter):355-400mm
Curved Boot (A Diameter):100mmCurved Boot (B Diameter):100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224-250mm, 280-315mm, 355-400mm
125mm Curved Boots
Curved boots for 125mm diameter duct.
Branching onto 125mm, 150mm, 180mm, 200mm, 224-250mm, 280-315mm & 355-400mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£20.94 (excl. VAT) (CB-125/125)
Mechanical Air SuppliesLtd17th November 2021
Page 29 of 70
CB-125/125 Curved Boot (A Diameter):125mmCurved Boot (B Diameter):125mm
CB-125/150 Curved Boot (A Diameter):125mmCurved Boot (B Diameter):150mm
CB-125/180 Curved Boot (A Diameter):125mmCurved Boot (B Diameter):180mm
CB-125/200 Curved Boot (A Diameter):125mmCurved Boot (B Diameter):200mm
CB-125/250 Curved Boot (A Diameter):125mmCurved Boot (B Diameter):224-250mm
CB-125/300 Curved Boot (A Diameter):125mmCurved Boot (B Diameter):280-315mm
CB-125/400 Curved Boot (A Diameter):125mmCurved Boot (B Diameter):355-400mm
Curved Boot (A Diameter):125mmCurved Boot (B Diameter):125mm, 150mm, 180mm, 200mm, 224-250mm, 280-315mm, 355-400mm
150mm Curved Boots
Curved boots for 150mm diameter duct.
Branching onto 150mm, 200mm, 224-250mm, 280-315mm, 355-400mm & 450mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£21.05 (excl. VAT) (CB-150/150)
CB-150/150 Curved Boot (A Diameter):150mmCurved Boot (B Diameter):150mm
Mechanical Air SuppliesLtd17th November 2021
Page 30 of 70
CB-150/200 Curved Boot (A Diameter):150mmCurved Boot (B Diameter):200mm
CB-150/250 Curved Boot (A Diameter):150mmCurved Boot (B Diameter):224-250mm
CB-150/300 Curved Boot (A Diameter):150mmCurved Boot (B Diameter):280-315mm
CB-150/400 Curved Boot (A Diameter):150mmCurved Boot (B Diameter):355-400mm
CB-150/450 Curved Boot (A Diameter):150mmCurved Boot (B Diameter):450mm
Curved Boot (A Diameter):150mmCurved Boot (B Diameter):150mm, 200mm, 224-250mm, 280-315mm, 355-400mm, 450mm
160mm Curved Boots
Curved boots for 160mm diameter duct.
Branching onto 160mm, 200mm, 250mm, 280-315mm & 355-400mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£23.52 (excl. VAT) (CB-160/160)
CB-160/160 Curved Boot (A Diameter):160mmCurved Boot (B Diameter):160mm
CB-160/200 Curved Boot (A Diameter):160mmCurved Boot (B Diameter):200mm
CB-160/250 Curved Boot (A Diameter):160mmCurved Boot (B Diameter):250mm
CB-160/300 Curved Boot (A Diameter):
Mechanical Air SuppliesLtd17th November 2021
Page 31 of 70
160mmCurved Boot (B Diameter):280-315mm
CB-160/400 Curved Boot (A Diameter):160mmCurved Boot (B Diameter):355-400mm
Curved Boot (A Diameter):160mmCurved Boot (B Diameter):160mm, 200mm, 250mm, 280-315mm, 355-400mm
180mm Curved Boots
Curved boots for 180mm diameter duct.
Branching onto 180mm, 200mm, 224mm, 250mm, 280-315mm, 355-400mm & 450mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£29.49 (excl. VAT) (CB-180/180)
CB-180/180 Curved Boot (A Diameter):180mmCurved Boot (B Diameter):180mm
CB-180/200 Curved Boot (A Diameter):180mmCurved Boot (B Diameter):200mm
CB-180/224 Curved Boot (A Diameter):180mmCurved Boot (B Diameter):224mm
CB-180/250 Curved Boot (A Diameter):180mmCurved Boot (B Diameter):250mm
CB-180/300 Curved Boot (A Diameter):180mmCurved Boot (B Diameter):280-315mm
CB-180/400 Curved Boot (A Diameter):180mmCurved Boot (B Diameter):355-400mm
CB-180/450 Curved Boot (A Diameter):180mm
Mechanical Air SuppliesLtd17th November 2021
Page 32 of 70
Curved Boot (B Diameter):450mm
Curved Boot (A Diameter):180mmCurved Boot (B Diameter):180mm, 200mm, 224mm, 250mm, 280-315mm, 355-400mm, 450mm
200mm Curved Boots
Curved boots for 200mm diameter duct.
Branching onto 200mm, 224-250mm, 300-315mm, 355mm, 400mm, 450mm & 500mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£27.84 (excl. VAT) (CB-200/355)
CB-200/200 Curved Boot (A Diameter):200mmCurved Boot (B Diameter):200mm
CB-200/250 Curved Boot (A Diameter):200mmCurved Boot (B Diameter):224-250mm
CB-200/300 Curved Boot (A Diameter):200mmCurved Boot (B Diameter):300-315mm
CB-200/355 Curved Boot (A Diameter):200mmCurved Boot (B Diameter):355mm
CB-200/400 Curved Boot (A Diameter):200mmCurved Boot (B Diameter):400mm
CB-200/450 Curved Boot (A Diameter):200mmCurved Boot (B Diameter):450mm
CB-200/500 Curved Boot (A Diameter):200mmCurved Boot (B Diameter):500mm
Curved Boot (A Diameter):200mmCurved Boot (B Diameter):200mm, 224-250mm, 300-315mm, 355mm, 400mm, 450mm, 500mm
Mechanical Air SuppliesLtd17th November 2021
Page 33 of 70
224mm Curved Boots
Curved boots for 224mm diameter duct.
Branching onto 224mm, 250mm, 280-315mm & 355-400mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£35.02 (excl. VAT) (CB-224/224)
CB-224/224 Curved Boot (A Diameter):224mmCurved Boot (B Diameter):224mm
CB-224/250 Curved Boot (A Diameter):224mmCurved Boot (B Diameter):250mm
CB-224/300 Curved Boot (A Diameter):224mmCurved Boot (B Diameter):280-315mm
CB-224/400 Curved Boot (A Diameter):224mmCurved Boot (B Diameter):355-400mm
Curved Boot (A Diameter):224mmCurved Boot (B Diameter):224mm, 250mm, 280-315mm, 355-400mm
250mm Curved Boots
Curved boots for 250mm diameter duct.
Branching onto 250mm, 280-315mm, 355mm, 400mm, 450mm & 500mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£32.66 (excl. VAT) (CB-250/250)
Mechanical Air SuppliesLtd17th November 2021
Page 34 of 70
CB-250/250 Curved Boot (A Diameter):250mmCurved Boot (B Diameter):250mm
CB-250/300 Curved Boot (A Diameter):250mmCurved Boot (B Diameter):280-315mm
CB-250/355 Curved Boot (A Diameter):250mmCurved Boot (B Diameter):355mm
CB-250/400 Curved Boot (A Diameter):250mmCurved Boot (B Diameter):400mm
CB-250/450 Curved Boot (A Diameter):250mmCurved Boot (B Diameter):450mm
CB-250/500 Curved Boot (A Diameter):250mmCurved Boot (B Diameter):500mm
Curved Boot (A Diameter):250mmCurved Boot (B Diameter):250mm, 280-315mm, 355mm, 400mm, 450mm, 500mm
300mm Curved Boots
Curved boots for 300mm diameter duct.
Branching onto 300-315mm, 355mm, 400mm, 450mm & 500mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£39.49 (excl. VAT) (CB-300/300)
CB-300/300 Curved Boot (A Diameter):300mmCurved Boot (B Diameter):300-315mm
CB-300/355 Curved Boot (A Diameter):300mmCurved Boot (B Diameter):355mm
Mechanical Air SuppliesLtd17th November 2021
Page 35 of 70
CB-300/400 Curved Boot (A Diameter):300mmCurved Boot (B Diameter):400mm
CB-300/450 Curved Boot (A Diameter):300mmCurved Boot (B Diameter):450mm
CB-300/500 Curved Boot (A Diameter):300mmCurved Boot (B Diameter):500mm
Curved Boot (A Diameter):300mmCurved Boot (B Diameter):300-315mm, 355mm, 400mm, 450mm, 500mm
315mm Curved Boots
Curved boots for 100mm diameter duct.
Branching onto 315mm, 355mm, 400mm, 450mm & 500mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£39.49 (excl. VAT) (CB-315/315)
CB-315/315 Curved Boot (A Diameter):315mmCurved Boot (B Diameter):315mm
CB-315/355 Curved Boot (A Diameter):315mmCurved Boot (B Diameter):355mm
CB-315/400 Curved Boot (A Diameter):315mmCurved Boot (B Diameter):400mm
CB-315/450 Curved Boot (A Diameter):315mmCurved Boot (B Diameter):450mm
CB-315/500 Curved Boot (A Diameter):315mmCurved Boot (B Diameter):500mm
Curved Boot (A Diameter):315mm
Mechanical Air SuppliesLtd17th November 2021
Page 36 of 70
Curved Boot (B Diameter):315mm, 355mm, 400mm, 450mm, 500mm
355mm Curved Boots
Curved boots for 355mm diameter duct.
Branching onto 355mm, 400mm, 450mm & 500mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£67.92 (excl. VAT) (CB-355/355)
CB-355/355 Curved Boot (A Diameter):355mmCurved Boot (B Diameter):355mm
CB-355/400 Curved Boot (A Diameter):355mmCurved Boot (B Diameter):400mm
CB-355/450 Curved Boot (A Diameter):355mmCurved Boot (B Diameter):450mm
CB-355/500 Curved Boot (A Diameter):355mmCurved Boot (B Diameter):500mm
Curved Boot (A Diameter):355mmCurved Boot (B Diameter):355mm, 400mm, 450mm, 500mm
400mm Curved Boots
Curved boots for 400mm diameter duct.
Branching onto 400mm, 450mm, 500mm, 560mm, 600mm, 630mm, 710mm & 800mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
Mechanical Air SuppliesLtd17th November 2021
Page 37 of 70
£78.38 (excl. VAT) (CB-400/400)
CB-400/400 Curved Boot (A Diameter):400mmCurved Boot (B Diameter):400mm
CB-400/450 Curved Boot (A Diameter):400mmCurved Boot (B Diameter):450mm
CB-400/500 Curved Boot (A Diameter):400mmCurved Boot (B Diameter):500mm
CB-400/600 Curved Boot (A Diameter):400mmCurved Boot (B Diameter):600mm
CB-400/710 Curved Boot (A Diameter):400mmCurved Boot (B Diameter):710mm
CB-400/800 Curved Boot (A Diameter):400mmCurved Boot (B Diameter):800mm
Curved Boot (A Diameter):400mmCurved Boot (B Diameter):400mm, 450mm, 500mm, 600mm, 710mm, 800mm
450mm Curved Boots
Curved boots for 450mm diameter duct.
Branching onto 450mm, 500mm, 560mm, 600mm, 630mm, 710mm & 800mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£80.73 (excl. VAT) (CB-450/450)
CB-450/450 Curved Boot (A Diameter):450mmCurved Boot (B Diameter):450mm
CB-450/500 Curved Boot (A Diameter):450mmCurved Boot (B Diameter):
Mechanical Air SuppliesLtd17th November 2021
Page 38 of 70
500mm
CB-450/560 Curved Boot (A Diameter):450mmCurved Boot (B Diameter):560mm
CB-450/600 Curved Boot (A Diameter):450mmCurved Boot (B Diameter):600mm
CB-450/630 Curved Boot (A Diameter):450mmCurved Boot (B Diameter):630mm
CB-450/710 Curved Boot (A Diameter):450mmCurved Boot (B Diameter):710mm
CB-450/800 Curved Boot (A Diameter):450mmCurved Boot (B Diameter):800mm
Curved Boot (A Diameter):450mmCurved Boot (B Diameter):450mm, 500mm, 560mm, 600mm, 630mm, 710mm, 800mm
500mm Curved Boots
Curved boots for 500mm diameter duct.
Branching onto 500mm, 560mm, 600mm, 630mm, 710mm & 800mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£98.82 (excl. VAT) (CB-500/600)
CB-500/500 Curved Boot (A Diameter):500mmCurved Boot (B Diameter):500mm
CB-500/560 Curved Boot (A Diameter):500mmCurved Boot (B Diameter):560mm
CB-500/600 Curved Boot (A Diameter):500mmCurved Boot (B Diameter):600mm
Mechanical Air SuppliesLtd17th November 2021
Page 39 of 70
CB-500/630 Curved Boot (A Diameter):500mmCurved Boot (B Diameter):630mm
CB-500/710 Curved Boot (A Diameter):500mmCurved Boot (B Diameter):710mm
CB-500/800 Curved Boot (A Diameter):500mmCurved Boot (B Diameter):800mm
Curved Boot (A Diameter):500mmCurved Boot (B Diameter):500mm, 560mm, 600mm, 630mm, 710mm, 800mm
560mm Curved Boots
Curved boots for 560mm diameter duct.
Branching onto 560mm, 600mm, 630mm, 710mm & 800mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£110.06 (excl. VAT) (CB-560/560)
CB-560/560 Curved Boot (A Diameter):560mmCurved Boot (B Diameter):560mm
CB-560/600 Curved Boot (A Diameter):560mmCurved Boot (B Diameter):600mm
CB-560/630 Curved Boot (A Diameter):560mmCurved Boot (B Diameter):630mm
CB-560/710 Curved Boot (A Diameter):560mmCurved Boot (B Diameter):710mm
CB-560/800 Curved Boot (A Diameter):560mmCurved Boot (B Diameter):800mm
Mechanical Air SuppliesLtd17th November 2021
Page 40 of 70
Curved Boot (A Diameter):560mmCurved Boot (B Diameter):560mm, 600mm, 630mm, 710mm, 800mm
600mm Curved Boots
Curved boots for 600mm diameter duct.
Branching onto 600mm, 630mm, 710mm & 800mmduct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£114.72 (excl. VAT) (CB-600/600)
CB-600/600 Curved Boot (A Diameter):600mmCurved Boot (B Diameter):600mm
CB-600/630 Curved Boot (A Diameter):600mmCurved Boot (B Diameter):630mm
CB-600/710 Curved Boot (A Diameter):600mmCurved Boot (B Diameter):710mm
CB-600/800 Curved Boot (A Diameter):600mmCurved Boot (B Diameter):800mm
Curved Boot (A Diameter):600mmCurved Boot (B Diameter):600mm, 630mm, 710mm, 800mm
Pressed & Fabricated Saddles
80mm Saddles
Saddle for 80mm diameter duct.
Branching onto 80mm, 100mm, 125mm, 150-160mm & 180-224mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
Mechanical Air SuppliesLtd17th November 2021
Page 41 of 70
£6.06 (excl. VAT) (PS-80/100)
PS-80/80 Saddle (Size 1):80mmSaddle (Size 2):80mm
PS-80/125 Saddle (Size 1):80mmSaddle (Size 2):125mm
PS-80/100 Saddle (Size 1):80mmSaddle (Size 2):100mm
PS-80/150 Saddle (Size 1):80mmSaddle (Size 2):150-160mm
PS-80/200 Saddle (Size 1):80mmSaddle (Size 2):180-224mm
Saddle (Size 1):80mmSaddle (Size 2):80mm, 100mm, 125mm, 150-160mm, 180-224mm
100mm Saddles
Saddle for 100mm diameter duct.
Branching onto 100mm, 125mm, 150-160mm, 180-224mm, 224-250mm, 280-355mm & 355-500mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£5.14 (excl. VAT) (PS-100/100)
PS-100/100 Saddle (Size 1):100mmSaddle (Size 2):100mm
PS-100/125 Saddle (Size 1):100mmSaddle (Size 2):125mm
Mechanical Air SuppliesLtd17th November 2021
Page 42 of 70
PS-100/150 Saddle (Size 1):100mmSaddle (Size 2):150-160mm
PS-100/200 Saddle (Size 1):100mmSaddle (Size 2):180-224mm
PS-100/250 Saddle (Size 1):100mmSaddle (Size 2):224-250mm
PS-100/300 Saddle (Size 1):100mmSaddle (Size 2):280-355mm
PS-100/400 Saddle (Size 1):100mmSaddle (Size 2):355-500mm
Saddle (Size 1):100mmSaddle (Size 2):100mm, 125mm, 150-160mm, 180-224mm, 224-250mm, 280-355mm, 355-500mm
125mm Saddles
Saddle for 80mm diameter duct.
Branching onto 80mm, 100mm, 125mm, 150-160mm & 180-224mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£5.30 (excl. VAT) (PS-125/125)
PS-125/125 Saddle (Size 1):125mmSaddle (Size 2):125mm
PS-125/150 Saddle (Size 1):125mmSaddle (Size 2):150-160mm
PS-125/200 Saddle (Size 1):125mmSaddle (Size 2):180-224mm
PS-125/250 Saddle (Size 1):125mmSaddle (Size 2):224-250mm
PS-125/300 Saddle (Size 1):125mm
Mechanical Air SuppliesLtd17th November 2021
Page 43 of 70
Saddle (Size 2):280-315mm
PS-125/400 Saddle (Size 1):125mmSaddle (Size 2):355-500mm
Saddle (Size 1):125mmSaddle (Size 2):125mm, 150-160mm, 180-224mm, 224-250mm, 280-315mm, 355-500mm
150mm Saddles
Saddle for 150mm diameter duct.
Branching onto 150-160mm, 180-224mm, 224-250mm, 280-355mm & 355-560mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£6.18 (excl. VAT) (PS-150/150)
PS-150/150 Saddle (Size 1):150mmSaddle (Size 2):150-160mm
PS-150/200 Saddle (Size 1):150mmSaddle (Size 2):180-224mm
PS-150/250 Saddle (Size 1):150mmSaddle (Size 2):224-250mm
PS-150/300 Saddle (Size 1):150mmSaddle (Size 2):280-355mm
PS-150/400 Saddle (Size 1):150mmSaddle (Size 2):355-560mm
Saddle (Size 1):150mmSaddle (Size 2):150-160mm, 180-224mm, 224-250mm, 280-355mm, 355-560mm
160mm Saddles
Saddle for 160mm diameter duct.
Branching onto 160mm, 180-224mm, 224-250mm, 280-315mm & 355-500mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
Mechanical Air SuppliesLtd17th November 2021
Page 44 of 70
£6.51 (excl. VAT) (PS-160/160)
PS-160/160 Saddle (Size 1):160mmSaddle (Size 2):160mm
PS-160/200 Saddle (Size 1):160mmSaddle (Size 2):180-224mm
PS-160/250 Saddle (Size 1):160mmSaddle (Size 2):224-250mm
PS-160/300 Saddle (Size 1):160mmSaddle (Size 2):280-315mm
PS-160/400 Saddle (Size 1):160mmSaddle (Size 2):355-500mm
Saddle (Size 1):160mmSaddle (Size 2):160mm, 180-224mm, 224-250mm, 280-315mm, 355-500mm
180mm Saddles
Saddle for 180mm diameter duct.
Branching onto 180mm, 200mm, 224mm, 250mm, 300mm, 315mm, 355mm, 400mm, 450mm & 500mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
All 180 diameter saddles are fabricated and not pressed.Please note that the flange size is smaller than a pressed saddle.
£10.48 (excl. VAT) (PS-180/180)
PS-180/180 Saddle (Size 1):180mmSaddle (Size 2):180mm
PS-180/200 Saddle (Size 1):180mmSaddle (Size 2):200mm
PS-180/224 Saddle (Size 1):180mmSaddle (Size 2):
Mechanical Air SuppliesLtd17th November 2021
Page 45 of 70
224mm
PS-180/250 Saddle (Size 1):180mmSaddle (Size 2):250mm
PS-180/300 Saddle (Size 1):180mmSaddle (Size 2):300mm
PS-180/315 Saddle (Size 1):180mmSaddle (Size 2):315mm
PS-180/355 Saddle (Size 1):180mmSaddle (Size 2):355mm
PS-180/400 Saddle (Size 1):180mmSaddle (Size 2):400mm
PS-180/450 Saddle (Size 1):180mmSaddle (Size 2):450mm
PS-180/500 Saddle (Size 1):180mmSaddle (Size 2):500mm
Saddle (Size 1):180mmSaddle (Size 2):180mm, 200mm, 224mm, 250mm, 300mm, 315mm, 355mm, 400mm, 450mm, 500mm
200mm Saddles
Saddle for 200mm diameter duct.
Branching onto 200mm, 224-250mm, 280-315mm, 355-400mm & 450-560mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£8.72 (excl. VAT) (PS-200/200)
PS-200/200 Saddle (Size 1):200mmSaddle (Size 2):200mm
PS-200/250 Saddle (Size 1):200mmSaddle (Size 2):224-250mm
PS-200/300 Saddle (Size 1):
Mechanical Air SuppliesLtd17th November 2021
Page 46 of 70
200mmSaddle (Size 2):280-315mm
PS-200/400 Saddle (Size 1):200mmSaddle (Size 2):355-400mm
PS-200/500 Saddle (Size 1):200mmSaddle (Size 2):450-560mm
Saddle (Size 1):200mmSaddle (Size 2):200mm, 224-250mm, 280-315mm, 355-400mm, 450-560mm
224mm Saddles
Saddle for 224mm diameter duct.
Branching onto 224mm, 250mm, 300mm, 315mm, 355mm, 400mm, 450mm & 500mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
224 saddles are fabricated and has a small flange size than the pressed saddle.
Please note: Due to the high turn over of this product flange sizes may vary.
£30.61 (excl. VAT) (PS-224/000)
PS-224/224 Saddle (Size 1):224mmSaddle (Size 2):224mm
PS-224/250 Saddle (Size 1):224mmSaddle (Size 2):250mm
PS-224/300 Saddle (Size 1):224mmSaddle (Size 2):300mm
PS-224/315 Saddle (Size 1):224mmSaddle (Size 2):315mm
PS-224/355 Saddle (Size 1):224mmSaddle (Size 2):355mm
PS-224/400 Saddle (Size 1):224mmSaddle (Size 2):400mm
PS-224/450 Saddle (Size 1):224mm
Mechanical Air SuppliesLtd17th November 2021
Page 47 of 70
Saddle (Size 2):450mm
PS-224/500 Saddle (Size 1):224mmSaddle (Size 2):500mm
Saddle (Size 1):224mmSaddle (Size 2):224mm, 250mm, 300mm, 315mm, 355mm, 400mm, 450mm, 500mm
250mm Saddles
Saddle for 250mm diameter duct.
Branching onto 250mm, 280-315mm, 355-450mm & 450-560mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£14.87 (excl. VAT) (PS-250/250)
PS-250/250 Saddle (Size 1):250mmSaddle (Size 2):250mm
PS-250/300 Saddle (Size 1):250mmSaddle (Size 2):280-315mm
PS-250/400 Saddle (Size 1):250mmSaddle (Size 2):355-450mm
PS-250/500 Saddle (Size 1):250mmSaddle (Size 2):450-560mm
Saddle (Size 1):250mmSaddle (Size 2):250mm, 280-315mm, 355-450mm, 450-560mm
280mm Saddles
Saddle for 80mm diameter duct.
Branching onto 80mm, 100mm, 125mm, 150-160mm & 180-224mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
280mm saddles are fabricated and not pressed.
£30.61 (excl. VAT) (PS-280/300)
Mechanical Air SuppliesLtd17th November 2021
Page 48 of 70
PS-280/280 Saddle (Size 1):280mmSaddle (Size 2):280mm
PS-280/300 Saddle (Size 1):280mmSaddle (Size 2):300mm
PS-280/315 Saddle (Size 1):280mmSaddle (Size 2):315mm
PS-280/355 Saddle (Size 1):280mmSaddle (Size 2):355mm
PS-280/400 Saddle (Size 1):280mmSaddle (Size 2):400mm
PS-280/450 Saddle (Size 1):280mmSaddle (Size 2):450mm
PS-280/500 Saddle (Size 1):280mmSaddle (Size 2):500mm
PS-280/560 Saddle (Size 1):280mmSaddle (Size 2):560mm
PS-280/600 Saddle (Size 1):280mmSaddle (Size 2):600mm
Saddle (Size 1):280mmSaddle (Size 2):280mm, 300mm, 315mm, 355mm, 400mm, 450mm, 500mm, 560mm, 600mm
300mm Saddles
Saddle for 300mm diameter duct.
Branching onto 300mm, 315mm, 355mm, 400mm, 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£32.10 (excl. VAT) (PS-300/500)
PS-300/300 Saddle (Size 1):300mmSaddle (Size 2):
Mechanical Air SuppliesLtd17th November 2021
Page 49 of 70
300mm
PS-300/315 Saddle (Size 1):300mmSaddle (Size 2):315mm
PS-300/355 Saddle (Size 1):300mmSaddle (Size 2):355mm
PS-300/400 Saddle (Size 1):300mmSaddle (Size 2):400mm
PS-300/450 Saddle (Size 1):300mmSaddle (Size 2):450mm
PS-300/500 Saddle (Size 1):300mmSaddle (Size 2):500mm
PS-300/560 Saddle (Size 1):300mmSaddle (Size 2):560mm
PS-300/600 Saddle (Size 1):300mmSaddle (Size 2):600mm
Saddle (Size 1):300mmSaddle (Size 2):300mm, 315mm, 355mm, 400mm, 450mm, 500mm, 560mm, 600mm
315mm Saddles
Saddle for 315mm diameter duct.
Branching onto 315mm, 355mm, 400mm, 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£29.43 (excl. VAT) (PS-315/315)
PS-315/315 Saddle (Size 1):315mmSaddle (Size 2):315mm
PS-315/355 Saddle (Size 1):315mmSaddle (Size 2):355mm
PS-315/400 Saddle (Size 1):
Mechanical Air SuppliesLtd17th November 2021
Page 50 of 70
315mmSaddle (Size 2):400mm
PS-315/450 Saddle (Size 1):315mmSaddle (Size 2):450mm
PS-315/500 Saddle (Size 1):315mmSaddle (Size 2):500mm
PS-315/560 Saddle (Size 1):315mmSaddle (Size 2):560mm
PS-315/600 Saddle (Size 1):315mmSaddle (Size 2):600mm
Saddle (Size 1):315mmSaddle (Size 2):315mm, 355mm, 400mm, 450mm, 500mm, 560mm, 600mm
355mm Saddles
Saddle for 355mm diameter duct.
Branching onto 355mm, 400mm, 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£47.02 (excl. VAT) (PS-355/355)
PS-355/355 Saddle (Size 1):355mmSaddle (Size 2):355mm
PS-355/400 Saddle (Size 1):355mmSaddle (Size 2):400mm
PS-355/450 Saddle (Size 1):355mmSaddle (Size 2):450mm
PS-355/500 Saddle (Size 1):355mmSaddle (Size 2):500mm
PS-355/560 Saddle (Size 1):355mmSaddle (Size 2):560mm
Mechanical Air SuppliesLtd17th November 2021
Page 51 of 70
PS-355/600 Saddle (Size 1):355mmSaddle (Size 2):600mm
Saddle (Size 1):355mmSaddle (Size 2):355mm, 400mm, 450mm, 500mm, 560mm, 600mm
400mm Saddles
Saddles for 400mm diameter duct.
Branching onto 400mm, 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£52.64 (excl. VAT) (PS-400/400)
PS-400/400 Saddle (Size 1):400mmSaddle (Size 2):400mm
PS-400/450 Saddle (Size 1):400mmSaddle (Size 2):450mm
PS-400/500 Saddle (Size 1):400mmSaddle (Size 2):500mm
PS-400/560 Saddle (Size 1):400mmSaddle (Size 2):560mm
PS-400/600 Saddle (Size 1):400mmSaddle (Size 2):600mm
Saddle (Size 1):400mmSaddle (Size 2):400mm, 450mm, 500mm, 560mm, 600mm
450mm Saddles
Saddles for 450mm diameter duct.
Branching onto 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£58.59 (excl. VAT) (PS-450/450)
Mechanical Air SuppliesLtd17th November 2021
Page 52 of 70
PS-450/450 Saddle (Size 1):450mmSaddle (Size 2):450mm
PS-450/500 Saddle (Size 1):450mmSaddle (Size 2):500mm
PS-450/560 Saddle (Size 1):450mmSaddle (Size 2):560mm
PS-450/600 Saddle (Size 1):450mmSaddle (Size 2):600mm
Saddle (Size 1):450mmSaddle (Size 2):450mm, 500mm, 560mm, 600mm
500mm Saddles
Saddles for 500mm diameter duct.
Branching onto 500mm, 560mm, 600mm, 630mm & 710mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£66.44 (excl. VAT) (PS-500/500)
PS-500/500 Saddle (Size 1):500mmSaddle (Size 2):500mm
PS-500/560 Saddle (Size 1):500mmSaddle (Size 2):560mm
PS-500/600 Saddle (Size 1):500mmSaddle (Size 2):600mm
PS-500/630 Saddle (Size 1):500mmSaddle (Size 2):630mm
PS-500/710 Saddle (Size 1):500mmSaddle (Size 2):710mm
Saddle (Size 1):500mm
Mechanical Air SuppliesLtd17th November 2021
Page 53 of 70
Saddle (Size 2):500mm, 560mm, 600mm, 630mm, 710mm
Couplers & Clamps
Duct Suspension Rings - Centre Nut M08/M10
Single nut suspension ring (M08 & M10 tapped nut)
Two piece centre boss suspension ring, with M08 & M10 tapped nut.
For duct diameters >450mm use our split rings
£3.42 – £9.07 (excl. VAT) (SPTB-100)
SPTB-80 £3.42 (excl. VAT) Diameter:80mm
SPTB-100 £3.42 (excl. VAT) Diameter:100mm
SPTB-125 £3.69 (excl. VAT) Diameter:125mm
SPTB-150 £3.69 (excl. VAT) Diameter:150mm
SPTB-160 £4.32 (excl. VAT) Diameter:160mm
SPTB-180 £4.70 (excl. VAT) Diameter:180mm
SPTB-200 £4.70 (excl. VAT) Diameter:200mm
SPTB-224 £5.09 (excl. VAT) Diameter:224mm
SPTB-250 £5.24 (excl. VAT) Diameter:250mm
SPTB-280 £8.61 (excl. VAT) Diameter:280mm
SPTB-300 £6.47 (excl. VAT) Diameter:300mm
SPTB-315 £6.47 (excl. VAT) Diameter:315mm
SPTB-355 £8.26 (excl. VAT) Diameter:355mm
SPTB-400 £8.26 (excl. VAT) Diameter:400mm
SPTB-450 Diameter:450mm
Mechanical Air SuppliesLtd17th November 2021
Page 54 of 70
£9.07 (excl. VAT)
Diameter:80mm, 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm
Female Couplers
Female Coupler
Use for joining spiral fittings such as 2x 45 degree bends together.
Galvanised steel female collar.
£2.36 – £31.81 (excl. VAT) (CF-100)
CF-80 £2.36 (excl. VAT) Diameter:80mm
CF-100 £2.36 (excl. VAT) Diameter:100mm
CF-125 £2.50 (excl. VAT) Diameter:125mm
CF-150 £2.59 (excl. VAT) Diameter:150mm
CF-160 £2.70 (excl. VAT) Diameter:160mm
CF-180 £2.91 (excl. VAT) Diameter:180mm
CF-200 £2.91 (excl. VAT) Diameter:200mm
CF-224 £3.43 (excl. VAT) Diameter:224mm
CF-250 £3.43 (excl. VAT) Diameter:250mm
CF-280 £4.49 (excl. VAT) Diameter:280mm
CF-300 £4.83 (excl. VAT) Diameter:300mm
CF-315 £5.36 (excl. VAT) Diameter:315mm
CF-355 £6.75 (excl. VAT) Diameter:355mm
CF-400 £9.10 (excl. VAT) Diameter:400mm
CF-450 £9.90 (excl. VAT) Diameter:450mm
CF-500 Diameter:
Mechanical Air SuppliesLtd17th November 2021
Page 55 of 70
£9.91 (excl. VAT) 500mm
CF-560 £10.82 (excl. VAT) Diameter:560mm
CF-600 £16.07 (excl. VAT) Diameter:600mm
CF-630 £17.74 (excl. VAT) Diameter:630mm
CF-660 £21.70 (excl. VAT) Diameter:660mm
CF-710 £21.70 (excl. VAT) Diameter:710mm
CF-760 £22.82 (excl. VAT) Diameter:760mm
CF-800 £22.82 (excl. VAT) Diameter:800mm
CF-900 £26.57 (excl. VAT) Diameter:900mm
CF-1000 £31.81 (excl. VAT) Diameter:1000mm
Diameter:80mm, 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm, 500mm, 560mm, 600mm, 630mm, 660mm, 710mm, 760mm, 800mm, 900mm, 1000mm
Male Couplers
Allows two lengths of spiral tube ducting of the same diameter to be connected together.
Galvanised steel male collar.
£2.36 – £35.52 (excl. VAT) (C-100)
C-80 £2.36 (excl. VAT) Diameter:80mm
C-100 £2.36 (excl. VAT) Diameter:100mm
C-125 £2.50 (excl. VAT) Diameter:125mm
C-150 £2.59 (excl. VAT) Diameter:150mm
C-160 £2.70 (excl. VAT) Diameter:160mm
C-180 £2.91 (excl. VAT) Diameter:180mm
C-200 £2.91 (excl. VAT) Diameter:200mm
Mechanical Air SuppliesLtd17th November 2021
Page 56 of 70
C-224 £3.43 (excl. VAT) Diameter:224mm
C-250 £3.43 (excl. VAT) Diameter:250mm
C-280 £4.49 (excl. VAT) Diameter:280mm
C-300 £4.83 (excl. VAT) Diameter:300mm
C-315 £5.36 (excl. VAT) Diameter:315mm
C-355 £6.75 (excl. VAT) Diameter:355mm
C-400 £9.10 (excl. VAT) Diameter:400mm
C-450 £9.90 (excl. VAT) Diameter:450mm
C-500 £10.41 (excl. VAT) Diameter:500mm
C-560 £12.94 (excl. VAT) Diameter:560mm
C-600 £18.64 (excl. VAT) Diameter:600mm
C-630 £18.64 (excl. VAT) Diameter:630mm
C-660 £22.78 (excl. VAT) Diameter:660mm
C-710 £22.78 (excl. VAT) Diameter:710mm
C-760 £25.79 (excl. VAT) Diameter:760mm
C-800 £25.79 (excl. VAT) Diameter:800mm
C-900 £29.93 (excl. VAT) Diameter:900mm
C-1000 £35.52 (excl. VAT) Diameter:1000mm
Diameter:80mm, 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm, 500mm, 560mm, 600mm, 630mm, 660mm, 710mm, 760mm, 800mm, 900mm, 1000mm
Mechanical Air SuppliesLtd17th November 2021
Page 57 of 70
Spilt rings for Circular Spiral Ducting
Duct Split Rings
80mm - 1000mm spiral suspension rings.
Easy install.
Use 1 pair every 2-3m.
£3.42 – £28.97 (excl. VAT) (SPT-100)
SPT-80 £3.42 (excl. VAT) Diameter:80mm
SPT-100 £3.42 (excl. VAT) Diameter:100mm
SPT-125 £3.69 (excl. VAT) Diameter:125mm
SPT-150 £3.69 (excl. VAT) Diameter:150mm
SPT-160 £4.32 (excl. VAT) Diameter:160mm
SPT-180 £4.70 (excl. VAT) Diameter:180mm
SPT-200 £4.70 (excl. VAT) Diameter:200mm
SPT-224 £5.09 (excl. VAT) Diameter:224mm
SPT-250 £5.24 (excl. VAT) Diameter:250mm
SPT-280 £5.43 (excl. VAT) Diameter:280mm
SPT-300 £6.47 (excl. VAT) Diameter:300mm
SPT-315 £6.47 (excl. VAT) Diameter:315mm
SPT-355 £8.26 (excl. VAT) Diameter:355mm
SPT-400 £8.26 (excl. VAT) Diameter:400mm
SPT-450 £9.81 (excl. VAT) Diameter:450mm
SPT-500 £11.10 (excl. VAT) Diameter:500mm
Mechanical Air SuppliesLtd17th November 2021
Page 58 of 70
SPT-560 £12.71 (excl. VAT) Diameter:560mm
SPT-600 £12.71 (excl. VAT) Diameter:600mm
SPT-630 £14.55 (excl. VAT) Diameter:630mm
SPT-660 £17.18 (excl. VAT) Diameter:660mm
SPT-710 £21.19 (excl. VAT) Diameter:710mm
SPT-760 £23.23 (excl. VAT) Diameter:760mm
SPT-800 £24.83 (excl. VAT) Diameter:800mm
SPT-900 £26.34 (excl. VAT) Diameter:900mm
SPT-1000 £28.97 (excl. VAT) Diameter:1000mm
Diameter:80mm, 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm, 300mm, 315mm, 355mm,400mm, 450mm, 500mm, 560mm, 600mm, 630mm, 660mm, 710mm, 760mm, 800mm, 900mm, 1000mm
Spiral Attenuators (Silencers)
Spiral Attenuators (Silencers)
Ducting Attenuators (Spiral Silencers)
Designed to attenuate the noise in ventilation and air conditioning ducts.
Excellent sound absorbing properties.
Available in 10 diameters and 3 lengths as standard.
Internal layers - 50mm mineral fibre with fibre cloth and separated from the duct system by a perforated galvanised sheetsteel.
Acoustically tested according to ISO 7235 norm.
£29.91 – £175.35 (excl. VAT) (S-100/300)
S-100/300 £29.91 (excl. VAT) Attenuator (Spigot Size):100mmAttenuator (Length):300mm
S-100/600 £33.65 (excl. VAT) Attenuator (Spigot Size):100mmAttenuator (Length):600mm
S-100/900 Attenuator (Spigot Size):
Mechanical Air SuppliesLtd17th November 2021
Page 59 of 70
£47.08 (excl. VAT) 100mmAttenuator (Length):900mm
S-125/300 £32.13 (excl. VAT) Attenuator (Spigot Size):125mmAttenuator (Length):300mm
S-125/600 £37.62 (excl. VAT) Attenuator (Spigot Size):125mmAttenuator (Length):600mm
S-125/900 £50.35 (excl. VAT) Attenuator (Spigot Size):125mmAttenuator (Length):900mm
S-150/300 £37.50 (excl. VAT) Attenuator (Spigot Size):150mmAttenuator (Length):300mm
S-150/600 £41.46 (excl. VAT) Attenuator (Spigot Size):150mmAttenuator (Length):600mm
S-150/900 £53.28 (excl. VAT) Attenuator (Spigot Size):150mmAttenuator (Length):900mm
S-160/300 £37.50 (excl. VAT) Attenuator (Spigot Size):160mmAttenuator (Length):300mm
S-160/600 £41.46 (excl. VAT) Attenuator (Spigot Size):160mmAttenuator (Length):600mm
S-160/900 £53.28 (excl. VAT) Attenuator (Spigot Size):160mmAttenuator (Length):900mm
S-200/300 £43.69 (excl. VAT) Attenuator (Spigot Size):200mmAttenuator (Length):300mm
S-200/600 £48.59 (excl. VAT) Attenuator (Spigot Size):200mmAttenuator (Length):600mm
S-200/900 £66.94 (excl. VAT) Attenuator (Spigot Size):200mmAttenuator (Length):900mm
S-250/300 £49.89 (excl. VAT) Attenuator (Spigot Size):250mmAttenuator (Length):
Mechanical Air SuppliesLtd17th November 2021
Page 60 of 70
300mm
S-250/600 £58.64 (excl. VAT) Attenuator (Spigot Size):250mmAttenuator (Length):600mm
S-250/900 £78.62 (excl. VAT) Attenuator (Spigot Size):250mmAttenuator (Length):900mm
S-300/300 £66.23 (excl. VAT) Attenuator (Spigot Size):300mmAttenuator (Length):300mm
S-300/600 £78.74 (excl. VAT) Attenuator (Spigot Size):300mmAttenuator (Length):600mm
S-315/300 £66.23 (excl. VAT) Attenuator (Spigot Size):315mmAttenuator (Length):300mm
S-315/600 £78.74 (excl. VAT) Attenuator (Spigot Size):315mmAttenuator (Length):600mm
S-315/900 £104.21 (excl. VAT) Attenuator (Spigot Size):315mmAttenuator (Length):900mm
S-355/600 £129.15 (excl. VAT) Attenuator (Spigot Size):355mmAttenuator (Length):600mm
S-355/900 £160.65 (excl. VAT) Attenuator (Spigot Size):355mmAttenuator (Length):900mm
S-400/600 £139.65 (excl. VAT) Attenuator (Spigot Size):400mmAttenuator (Length):600mm
S-400/900 £175.35 (excl. VAT) Attenuator (Spigot Size):400mmAttenuator (Length):900mm
Attenuator (Spigot Size):100mm, 125mm, 150mm, 160mm, 200mm, 250mm, 300mm, 315mm, 355mm, 400mmAttenuator (Length):300mm, 600mm, 900mm
Anti-Vibration Mounts
Mechanical Air SuppliesLtd17th November 2021
Page 61 of 70
Helios Anti Vibration Suspension Mount (set of 4)£65.00 – £99.00 (excl. VAT) (SDZ-1)
SDZ-1 £65.00 (excl. VAT) Max Load Capacity:60 KGBrand:Helios Ventilation (UK)Fan accessories:Anti-Vibration
SDZ-2 £99.00 (excl. VAT) Max Load Capacity:160 KGBrand:Helios Ventilation (UK)Fan accessories:Anti-Vibration
Max Load Capacity:60 KG, 160 KGBrand:helios-ventilation-ukFan accessories:anti-vibration
Anti Vibration Pad for Gigabox fans (SDD-U 4Pcs)
SDD-U Helios Anti Vibration Pads for Gigabox Fans
1 Set of 4 pads for Gigabox fans designed to minimise vibration transmission to the floor.
To be installed on flat surface.
Load range of up to 160 kg.
£44.00 (excl. VAT) (SDD-U)
Anti vibration compression mounts (set of 4)Select the type of anti vibration mount depending on the fan weight.
Contents - 1 set = 4 anti vibration fan mounts
£40.00 – £207.90 (excl. VAT) (SDD-1)
SDD-1 £40.00 (excl. VAT) Max load capacity:80kg
SDD-2 £62.00 (excl. VAT) Max load capacity:180kg
SDD-5 £207.90 (excl. VAT) Max load capacity:210kg
Max load capacity:80kg, 180kg, 210kg
Anti-Vibration Turret Mounts
Eurovib VT Turret Mounts
Manufactured in Neoprene.
Designed to give high mechanical strength through an efficient rubber to metal bonding technique.
Isolation efficiency of 70% can be achieved at speeds as low as 630 rpm at maximum load.
All mounts are colour coded for ease of identification.
Mechanical Air SuppliesLtd17th November 2021
Page 62 of 70
Contact us for non-stocked VT mounts on fast lead times
£4.69 – £4.87 (excl. VAT) (AV-VT0B)
AV-VT0B £4.69 (excl. VAT) AV Mount (Spot Colour):Blue SpotAV Mount (Load Capacity):2.5-5kg
AV-VT0Y £4.69 (excl. VAT) AV Mount (Spot Colour):Yellow SpotAV Mount (Load Capacity):4-8kg
AV-VT1B £4.87 (excl. VAT) AV Mount (Spot Colour):Blue SpotAV Mount (Load Capacity):9-18kg
AV-VT1G £4.87 (excl. VAT) AV Mount (Spot Colour):Green SpotAV Mount (Load Capacity):20-40kg
AV Mount (Spot Colour):Blue Spot, Yellow Spot, Green SpotAV Mount (Load Capacity):2.5-5kg, 4-8kg, 9-18kg, 20-40kg
Spiral Access Doors
Spiral Access Doors
Curved Access Doors
Easy to install.
Sizes to suit most diameters of circular duct.
Provide an airtight seal at inspection points.
Self adhesive disposable duct hole cut out template
Installation instructions packaged with each access door.
£11.41 – £22.20 (excl. VAT) (ADS-100)
ADS-100 £11.41 (excl. VAT) To suit Spiral Duct Diameter:100mm
ADS-125 £11.41 (excl. VAT) To suit Spiral Duct Diameter:125mm
ADS-180 £11.41 (excl. VAT) To suit Spiral Duct Diameter:180mm
ADS-150 £11.41 (excl. VAT) To suit Spiral Duct Diameter:150/160mm
ADS-200 £11.41 (excl. VAT) To suit Spiral Duct Diameter:180/200mm
Mechanical Air SuppliesLtd17th November 2021
Page 63 of 70
ADS-224 £11.41 (excl. VAT) To suit Spiral Duct Diameter:224mm
ADS-250 £11.41 (excl. VAT) To suit Spiral Duct Diameter:224/250mm
ADS-280 £11.41 (excl. VAT) To suit Spiral Duct Diameter:280mm
ADS-300 £11.41 (excl. VAT) To suit Spiral Duct Diameter:300/315mm
ADS-355 £11.41 (excl. VAT) To suit Spiral Duct Diameter:355mm
ADS-400 £11.41 (excl. VAT) To suit Spiral Duct Diameter:400/450mm
ADS-450 £11.41 (excl. VAT) To suit Spiral Duct Diameter:450mm
ADS-500 £22.20 (excl. VAT) To suit Spiral Duct Diameter:500/560mm
ADS-560 £22.20 (excl. VAT) To suit Spiral Duct Diameter:500/560mm
ADS-630 £22.20 (excl. VAT) To suit Spiral Duct Diameter:630mm
ADS-660 £22.20 (excl. VAT) To suit Spiral Duct Diameter:660mm
ADS-710 £22.20 (excl. VAT) To suit Spiral Duct Diameter:710mm
ADS-813 £22.20 (excl. VAT) To suit Spiral Duct Diameter:800mm
To suit Spiral Duct Diameter:100mm, 125mm, 150/160mm, 180mm, 180/200mm, 224mm, 224/250mm, 280mm,300/315mm, 355mm, 400/450mm, 450mm, 500/560mm, 630mm, 660mm, 710mm, 800mm
Multi-Blade Circular VCDs
Multi Blade Volume Control Damper (Circular Spigot)£38.21 – £89.71 (excl. VAT) (142111-000)
142111-100 £38.21 (excl. VAT) VCD Circular Spigot Diameter:100mm
142111-125 £41.51 (excl. VAT) VCD Circular Spigot Diameter:125mm
142111-150 £44.77 (excl. VAT) VCD Circular Spigot Diameter:150mm
142111-160 VCD Circular Spigot Diameter:
Mechanical Air SuppliesLtd17th November 2021
Page 64 of 70
£46.13 (excl. VAT) 160mm
142111-180 £47.48 (excl. VAT) VCD Circular Spigot Diameter:180mm
142111-200 £49.32 (excl. VAT) VCD Circular Spigot Diameter:200mm
142111-224 £51.77 (excl. VAT) VCD Circular Spigot Diameter:224mm
142111-250 £54.19 (excl. VAT) VCD Circular Spigot Diameter:250mm
142111-300 £64.94 (excl. VAT) VCD Circular Spigot Diameter:300mm
142111-315 £64.04 (excl. VAT) VCD Circular Spigot Diameter:315mm
142111-350 £69.16 (excl. VAT) VCD Circular Spigot Diameter:350mm
142111-400 £74.61 (excl. VAT) VCD Circular Spigot Diameter:400mm
142111-450 £81.56 (excl. VAT) VCD Circular Spigot Diameter:450mm
142111-500 £89.71 (excl. VAT) VCD Circular Spigot Diameter:500mm
VCD Circular Spigot Diameter:100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 300mm, 315mm,350mm, 400mm, 450mm, 500mm
Iris Dampers
Iris DampersIris Dampers for circular ducting are available for diameters ranging from 80mm - 400mm.
Iris dampers allow for simple and precise flow tests to be measured and controlled at a single station.
Each Iris Damper has manometer connections allowing direct pressure measurements (if required).
Airflow, pressure drop, and sound requirements are the criteria to consider when using an Iris damper as part of aventilation duct system.
£44.28 – £374.24 (excl. VAT) (ID-000)
ID-80 £60.59 (excl. VAT) Iris Damper Diameter:80mm
ID-100 £44.28 (excl. VAT) Iris Damper Diameter:100mm
ID-125 £55.48 (excl. VAT) Iris Damper Diameter:125mm
Mechanical Air SuppliesLtd17th November 2021
Page 65 of 70
ID-150 £74.14 (excl. VAT) Iris Damper Diameter:150mm
ID-160 £74.14 (excl. VAT) Iris Damper Diameter:160mm
ID-200 £86.00 (excl. VAT) Iris Damper Diameter:200mm
ID-250 £102.74 (excl. VAT) Iris Damper Diameter:250mm
ID-300 £136.67 (excl. VAT) Iris Damper Diameter:300mm
ID-315 £123.27 (excl. VAT) Iris Damper Diameter:315mm
ID-400 £374.24 (excl. VAT) Iris Damper Diameter:400mm
Iris Damper Diameter:80mm, 100mm, 125mm, 150mm, 160mm, 200mm, 250mm, 300mm, 315mm, 400mm
Single Blade Balancing Dampers
Single Blade Balancing Damper£16.48 – £49.43 (excl. VAT) (BD-000)
BD-80 £16.97 (excl. VAT) Single Blade Balancing Diameter:80mm
BD-100 £16.48 (excl. VAT) Single Blade Balancing Diameter:100mm
BD-125 £17.11 (excl. VAT) Single Blade Balancing Diameter:125mm
BD-150 £17.96 (excl. VAT) Single Blade Balancing Diameter:150mm
BD-160 £18.64 (excl. VAT) Single Blade Balancing Diameter:160mm
BD-180 £19.04 (excl. VAT) Single Blade Balancing Diameter:180mm
BD-200 £19.04 (excl. VAT) Single Blade Balancing Diameter:200mm
BD-224 £22.76 (excl. VAT) Single Blade Balancing Diameter:224mm
BD-250 £22.76 (excl. VAT) Single Blade Balancing Diameter:250mm
BD-280 Single Blade Balancing Diameter:280mm
Mechanical Air SuppliesLtd17th November 2021
Page 66 of 70
£26.14 (excl. VAT)
BD-300 £26.52 (excl. VAT) Single Blade Balancing Diameter:300mm
BD-315 £27.61 (excl. VAT) Single Blade Balancing Diameter:315mm
BD-355 £41.75 (excl. VAT) Single Blade Balancing Diameter:355mm
BD-400 £49.43 (excl. VAT) Single Blade Balancing Diameter:400mm
Single Blade Balancing Diameter:80mm, 100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 224mm, 250mm, 280mm,300mm, 315mm, 355mm, 400mm
Circular Fire Dampers
Circular Fire Damper with Drywall Flange
Circular Fire Damper with Drywall Flange
Stocked sizes are shown.
Other diameters are available with fast lead times.
£60.33 – £93.58 (excl. VAT) (016027-000)
016027-100 £60.33 (excl. VAT) Fire Damper Circular Spigot Size:100mm
016027-125 £61.17 (excl. VAT) Fire Damper Circular Spigot Size:125mm
016027-150 £61.96 (excl. VAT) Fire Damper Circular Spigot Size:150mm
016027-160 £62.59 (excl. VAT) Fire Damper Circular Spigot Size:160mm
016027-200 £63.45 (excl. VAT) Fire Damper Circular Spigot Size:200mm
016027-250 £64.98 (excl. VAT) Fire Damper Circular Spigot Size:250mm
016027-300 £71.43 (excl. VAT) Fire Damper Circular Spigot Size:300mm
016027-315 £75.51 (excl. VAT) Fire Damper Circular Spigot Size:315mm
016027-355 £79.82 (excl. VAT) Fire Damper Circular Spigot Size:355mm
016027-400 Fire Damper Circular Spigot Size:400mm
Mechanical Air SuppliesLtd17th November 2021
Page 67 of 70
£83.35 (excl. VAT)
016027-450 £93.58 (excl. VAT) Fire Damper Circular Spigot Size:450mm
Fire Damper Circular Spigot Size:100mm, 125mm, 150mm, 160mm, 200mm, 250mm, 300mm, 315mm, 355mm, 400mm,450mm
Circular Fire Damper with Frame
Circular Fire Damper with Frame
Stocked sizes are shown.
Other diameters are available with fast lead times.
£60.33 – £108.54 (excl. VAT) (016021-000)
016021-100 £60.33 (excl. VAT) Fire Damper Circular Spigot Size:100mm
016021-125 £61.17 (excl. VAT) Fire Damper Circular Spigot Size:125mm
016021-150 £61.96 (excl. VAT) Fire Damper Circular Spigot Size:150mm
016021-160 £62.59 (excl. VAT) Fire Damper Circular Spigot Size:160mm
016021-180 £63.12 (excl. VAT) Fire Damper Circular Spigot Size:180mm
016021-200 £63.45 (excl. VAT) Fire Damper Circular Spigot Size:200mm
016021-225 £64.98 (excl. VAT) Fire Damper Circular Spigot Size:225mm
016021-250 £67.28 (excl. VAT) Fire Damper Circular Spigot Size:250mm
016021-300 £71.43 (excl. VAT) Fire Damper Circular Spigot Size:300mm
016021-315 £75.51 (excl. VAT) Fire Damper Circular Spigot Size:315mm
016021-355 £79.82 (excl. VAT) Fire Damper Circular Spigot Size:350mm
016021-400 £83.35 (excl. VAT) Fire Damper Circular Spigot Size:400mm
016021-450 £93.58 (excl. VAT) Fire Damper Circular Spigot Size:450mm
016021-500 £108.54 (excl. VAT) Fire Damper Circular Spigot Size:500mm
Mechanical Air SuppliesLtd17th November 2021
Page 68 of 70
Fire Damper Circular Spigot Size:100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 225mm, 250mm, 300mm, 315mm,350mm, 400mm, 450mm, 500mm
Circular Fire Damper without frame
Circular Fire Damper without frame
Stocked sizes are shown.
Other diameters are available with fast lead times.
Regulations stipulate that a Fire Damper must be installed with support that is independent e.g. Cleats.
£39.05 – £77.29 (excl. VAT) (016020-000)
016020-100 £39.05 (excl. VAT) Fire Damper Circular Spigot Size:100mm
016020-125 £39.87 (excl. VAT) Fire Damper Circular Spigot Size:125mm
016020-150 £40.70 (excl. VAT) Fire Damper Circular Spigot Size:150mm
016020-160 £41.31 (excl. VAT) Fire Damper Circular Spigot Size:160mm
016020-180 £41.73 (excl. VAT) Fire Damper Circular Spigot Size:180mm
016020-200 £42.24 (excl. VAT) Fire Damper Circular Spigot Size:200mm
016020-225 £43.13 (excl. VAT) Fire Damper Circular Spigot Size:225mm
016020-250 £43.88 (excl. VAT) Fire Damper Circular Spigot Size:250mm
016020-300 £45.81 (excl. VAT) Fire Damper Circular Spigot Size:300mm
016020-315 £47.34 (excl. VAT) Fire Damper Circular Spigot Size:315mm
016020-355 £50.75 (excl. VAT) Fire Damper Circular Spigot Size:350mm
016020-400 £54.38 (excl. VAT) Fire Damper Circular Spigot Size:400mm
016020-450 £57.92 (excl. VAT) Fire Damper Circular Spigot Size:450mm
016020-500 £67.69 (excl. VAT) Fire Damper Circular Spigot Size:500mm
016020-560 £77.29 (excl. VAT) Fire Damper Circular Spigot Size:560mm
Fire Damper Circular Spigot Size:100mm, 125mm, 150mm, 160mm, 180mm, 200mm, 225mm, 250mm, 300mm, 315mm,
Mechanical Air SuppliesLtd17th November 2021
Page 69 of 70
350mm, 400mm, 450mm, 500mm, 560mm
Externally Re-settable Fire Dampers
Externally resettable circular fire damper£64.48 – £109.61 (excl. VAT) (FDC-000)
FDC-100 £64.48 (excl. VAT) Fire Damper Circular Spigot Size:100mm
FDC-125 £67.70 (excl. VAT) Fire Damper Circular Spigot Size:125mm
FDC-150 £70.94 (excl. VAT) Fire Damper Circular Spigot Size:150mm
FDC-160 £74.80 (excl. VAT) Fire Damper Circular Spigot Size:160mm
FDC-200 £82.54 (excl. VAT) Fire Damper Circular Spigot Size:200mm
FDC-250 £91.56 (excl. VAT) Fire Damper Circular Spigot Size:250mm
FDC-300 £103.18 (excl. VAT) Fire Damper Circular Spigot Size:300mm
FDC-315 £109.61 (excl. VAT) Fire Damper Circular Spigot Size:315mm
Fire Damper Circular Spigot Size:100mm, 125mm, 150mm, 160mm, 200mm, 250mm, 300mm, 315mm
Mechanical Air SuppliesLtd17th November 2021
Page 70 of 70
