Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
SPIN
E | 20
18/2
019
PRODUCT CATALOG
SPINE
GMReis
Quality for Life - this is GMReis’ business vision, a company that, since 1989, has been: developing, producing and marketing its product line, classified in the following categories:
Ÿ Spine;
Ÿ Locking plates and cannulated screws, for traumatology of: upper limb, lower limb and pelvis ;
Ÿ Intramedullary nails for traumatology of: upper and lower limbs, and ankle arthrodesis;
Ÿ External fixators for traumatology and limb resconstruction;
Ÿ Extremities: foot and hand;
Ÿ Orthopediatrics;
Ÿ Bioresorbable suture anchors and,
Ÿ Biologics.
GMReis constantly pursues technological innovations and quality products in order to meet customers, surgeons and patients expectations and needs.
GMReis is located in Campinas/São Paulo – Brazil, with an area of 6.000 m², in a modern Technology Park. It has high-tech equipments, for quality control and production, an ISO Class 8 Cleanning Room of 600 square meters, where bone graft, spine PEEK cages and bioreabsorbable implants are manufactured.
PEEK CERVICAL SPACERSAtrium C-Lock PEEKAtrium C-PEEK
ANTERIOR CERVICAL PLATING SYSTEMSophira Plates
OCCIPITOCERVICAL FIXATIONOCCIFIX II - Occipitocervical Fixation System
CORPECTOMY SPACERSROM Mesh - Vertebral Spacer
THORACIC, LUMBAR AND SACRAL FIXATION - POSTERIOR APPROACHEXACTO - Pedicular Internal Fixation System With Polyaxial Schanz PinsPedimax II - Polyaxial Pedicle Screws System
PercutaneousSpondylolisthesisPorous
PEEK LUMBAR SPACERSPlifix PEEK - Posterior Lumbar Interbody Fusion SpacerTlifix PEEK - Transforaminal Lumbar Interbody Fusion Spacer
INTERSPINOUS SPACERDynafix PEEK - Interspinous Spacer
SPINE CABLEGama Cable
KYPHOPLASTYRestore Set
VERTEBROPLASTYBPS-A SetBPS-P Set
BIOLOGICALSSponjosa - Beta-Tricalcium Phosphate (â-TCP) Synthetic Bone GraftNew Osteo - Calcium Sulfate Synthetic Bone GraftCimentech - Radiopaque Bone Cement
INDEX
030304
0505
0606
0808
090910101010
121212
1313
1313
1414
151515
16161617
Atrium C-Lock PEEKPEEK cervical intervertebral spacer with anti-migrationlocking system and anatomical shape Atrium C-Lock PEEK
anterior approach procedures,height and support axial weight on treated level, with no need of plates and screws.
was developed for discectomy and arthrodesys up to 2 levels, to restore intervertebral
1 Anatomical design to fit perfectly on the intervertebral space and having maximum contact between the implant and the vertebral surface;
Wide central canal for bone graft;
"Toothed" surfaces increases implant fixation;
The titanium identification pin allows to assess the exact positioning of the implant by x-ray visualization;
Arrow Sign for positioning orientation from caudal to cranial spine region prevents placement mistakes and,
The titanium alloy locking system, offers immediate stability and prevents the implant from shifting after placement without any plates and screws, reducing surgery time.
ADVANTAGES AND CHARACTERISTICS
5 4
1
12 mm (small)13 mm (medium)14 mm (large)
GMReis | 03
PEEK CERVICAL SPACERS
236-45-P
236-50-P
236-60-P
236-70-P
236-45-M
236-50-M
236-60-M
236-70-M
236-45-G
236-50-G
236-60-G
236-70-G
Small 4,5 mm
Small 5,0 mm
Small 6,0 mm
Small 7,0 mm
Medium 4,5 mm
Medium 5,0 mm
Medium 6,0 mm
Medium 7,0 mm
Large 4,5 mm
Large 5,0 mm
Large 6,0 mm
Large 7,0 mm
Atrium C-Lock PEEK
Locking system for Atrium C-Lock PEEK
236-10
6
3
23
4
5
6
2
1
Made of PEEK conform ASTMF2026
h
COD h
ATRIUM C-PEEKPEEK cervical intervertebral spacer with anatomical shape
4,7 mm
5,7 mm
6,7 mm
7,7 mm
8,7 mm
9,7 mm
Atrium C-PEEK
173-23-P
173-15-P
173-16-P
173-17-P
173-18-P
173-29-P
1
23
4
Anatomical design to fit perfectly on the intervertebral space and better contact between the implant and the vertebral surface;
Wide central canal for bone graft;
"Toothed" surfaces increases implant fixation and,
The titanium identification pins allow to assess the exact positioning of the implant by x-ray visualization.
ADVANTAGES AND CHARACTERISTICS
Atrium C-PEEK was developed for discectomy and arthrodesis for anterior procedures to restore intervertebral height and support axial weight on treated level.
04 | GMReis
PEEK CERVICAL SPACERS
PEEK (polyether ether ketone) is a thermoplastic material, biocompatible due to the combination of its chemical and mechanical properties: this material has higher chemical stability and mechanical properties similarly to the cancellous bone, when compared to steel or titanium alloy.
The use of PEEK as raw material for surgical implants brings the advantage of its radiolucency, what allows to observe the intervertebral fusion on x-ray images.
PEEK
23 4
1
Made of PEEK conform ASTMF2026
h
COD h
Sophira PlatesLow Profile Anterior Cervical Plate with locking system
Sophira Plate was developed to treat of cervical spine by single or multi-level arthrodesis, improving the intervertebral fusion process.
pathologies
Placa Cervical Anterior Sophira
192-26
192-27
192-28
192-29
192-30
192-31
Sophira Screws
Ø3,5 x 13 mm
Ø3,5 x 15 mm
Ø3,5 x 17 mm
Ø4,0 x 13 mm
Ø4,0 x 15 mm
Ø4,0 x 17 mm
Placa Cervical Anterior Sophira Sophira Plates
192-01
192-02
192-03
192-04
192-05
192-06
192-07
192-08
192-09
192-10
192-11
192-12
192-13
192-14
22,5 mm 04 Holes
25,0 mm 04 Holes
27,5 mm 04 Holes
30,0 mm 05 Holes
32,5 mm 05 Holes
37,5 mm 05 Holes
40,0 mm 05 Holes
42,5 mm 05 Holes
45,0 mm 05 Holes
47,5 mm 05 Holes
52,5 mm 06 Holes
57,5 mm 07 Holes
62,5 mm 07 Holes
67,5 mm 07 Holes
1
2
3
4
Low-profile (1.7 mm) anatomic design for perfect adjust to the vertebra curvature and minimizes risks of soft tissue irritation;
In-plate locking system provides safety for patient and prevent screws migration;
Holes for temporary fixation facilitate the procedure, reducing surgical time and,
Ø3.5 and Ø4.0 mm (emergency) Screws, with 13.0, 15.0 and 17.0 mm length.
ADVANTAGES AND CHARACTERISTICS
ANTERIOR CERVICAL PLATING SYSTEM
GMReis | 05
2
4
3
1
Made of titanium alloy (ti-6al-4v) conform ASTMF136
OCCIFIX IIOccipitocervical Fixation System for cervical posterior fixation
OCCIPITOCERVICAL FIXATION
1
2
3
5
Three different options for occipital fixation: rod/plate (a); 1 and 2 holes plates (b), and central plates (c);
Ø3,5 mm longitudinal rods (a), and long rods with dual diameter for cervicothoracic fixation (b);
Lamina hooks with three size options, left and right;
Connectors with three angulation options (neutral, 15º and 35º), allow laterality and convergence ajustment of the lateral mass screws;
Polyaxial screws for lateral mass (a) and cancellous screws (b) which can be implanted on lateral mass or in the occipital;
Lateral connector allows transverse extension for longitudinal rod;
The same locking cap used for all system components and,
Crosslink hooks enhances fixation rigidity and biomechanical stability.
ADVANTAGES AND CHARACTERISTICS
OCCIFIX II was developed for posterior fixation of the cervical spine, from occipital to high thoracic spine (T2), with a variety of treatment possibilities.
6
4
78
06 | GMReis
1.a 1.b5.b
Made of titanium alloy (ti-6al-4v) conform ASTMF136
134-201
134-202
134-203
134-204
134-205
134-243
134-244
134-233
134-234
134-209
134-210
134-350-12
134-350-14
134-350-16
134-350-18
134-350-22
134-350-26
134-350-30
134-350-35
134-350-40
134-350-45
134-350-50
12 mm
14 mm
16 mm
18 mm
22 mm
26 mm
30 mm
35 mm
40 mm
45 mm
50 mm
134-04-12
134-04-14
134-04-16
134-04-18
134-04-20
134-04-22
134-04-24
134-04-26
134-04-28
134-04-30
134-04-32
134-04-34
134-04-36
134-04-38
134-04-40
134-04-45
134-04-50
12 mm
14 mm
16 mm
18 mm
20 mm
22 mm
24 mm
26 mm
28 mm
30 mm
32 mm
34 mm
36 mm
38 mm
40 mm
45 mm
50 mm
134-123
134-124
134-21
134-22
134-23
134-100
60 mm
70 mm
80 mm
120 mm
240 mm
300 mm
134-35-06
134-35-08
134-35-10
134-35-12
134-35-14
134-35-16
134-35-18
134-35-20
134-35-24
134-35-28
134-35-35
134-35-40
06 mm
08 mm
10 mm
12 mm
14 mm
16 mm
18 mm
20 mm
24 mm
28 mm
35 mm
40 mm
Rod
134-86
134-87
134-88
134-89
Ø3.5 / Ø4.5 x 300 mm
Ø3.5 / Ø4.5 x 500 mm
Ø3.5 / Ø6.0 x 300 mm
Ø3.5 / Ø6.0 x 500 mm
134-69
134-70
134-41
134-42
134-06
134-06L
134-80
134-10
134-20
10 mm
20 mm
Occifix II Ø4.0 Polyaxial Screw
Occifix II Lateral Connector
Occifix II Ø3.5 Polyaxial Micro Screws
Ø3.5 Longitudinal Rod
Locking Cap
Neutral
Right 15° Anguled
Left 15°Anguled
Right 35°Anguled
Left 35°Anguled
Occifix II Connectors
Occifix II Ø3.5 Cancellous Screw
Occifix II Hook
Right Large
Left Large
Right Medium
Left Medium
Right Small
Left Small
Occifix Rod/Plate
2 Holes
2 Holes Long
3 Holes
3 Holes Long
4 Holes
4 Holes Long
GMReis | 07
1.c
7
2.a3
4
8
5.a
5.b
2.b
OCCIFIX Rod Connector
134-276
134-277
3.5-3.5 mm Left
3.5-3.5 mm Right
134-24
134-25
134-26
134-27
40 mm
50 mm
60 mm
70 mm
134-278
134-279
134-228
134-229
134-05-50-M
134-05-60-M
134-05-S
134-05-D
1 Hole
2 Holes
134-216
134-45-04
134-45-06
134-45-08
134-45-10
134-45-12
134-45-14
134-45-16
134-45-18
Ø4.5 x 4 mm
Ø4.5 x 6 mm
Ø4.5 x 8 mm
Ø4.5 x 10 mm
Ø4.5 x 12 mm
Ø4.5 x 14 mm
Ø4.5 x 16 mm
Ø4.5 x 18 mm
134-50-04
134-50-06
134-50-08
134-50-10
134-50-12
134-50-14
134-50-16
134-50-18
Ø5.0 x 4 mm
Ø5.0 x 6 mm
Ø5.0 x 8 mm
Ø5.0 x 10 mm
Ø5.0 x 12 mm
Ø5.0 x 14 mm
Ø5.0 x 16 mm
Ø5.0 x 18 mm
Occifix II Occiptal Screwsfor Central Plate
Occifix II Crosslink Hook
OCCIFIX Rod/Rod Connector
Occifix II Occipital Plate
3.5-4.5 mm Left
3.5-4.5 mm Right
3.5-6.0 Left
3.5-6.0 Right
Occifix II Occipital Central Plate
3 Holes 50 mm
3 Holes 60 mm
Ø2.5 Transversal Rod
Made of titanium alloy (ti-6al-4v) conform ASTMF136
134-05-50-L
134-05-60-L
4 Holes 50 mm
4 Holes 60 mm
Occifix II Occipital Central Plate
ROM MeshTitanium vertebral spacer developed for cervical, thoracic and lumbar corpectomy procedures
Placa Cervical Anterior Sophira ROM Mesh
119-100
ROM Ring Screws
119-12-30-A
119-12-60-A
119-16-30-A
119-16-70-A
119-20-30-A
119-20-70-A
119-25-30-A
119-25-70-A
Ø12 x 30 mm
Ø12 x 60 mm
Ø16 x 30 mm
Ø16 x 70 mm
Ø19 x 30 mm
Ø19 x 70 mm
Ø25 x 30 mm
Ø25 x 70 mm
119-16-01-A
119-20-01-A
119-25-01-A
119-25-100-A
ROM Ring
Ø16 x 16 mm
Ø19 x 20 mm
Ø25 x 30 mmØ25 mm 8º Lordosis
CORPECTOMY SPACERS
ROM Mesh was developed to be used in corpectomy procedures on cervical, thoracic and lumbar spine levels to replace and to restore the height of a collapsed vertebral body. ROM Mesh is indicated for the treatment of infection, tumor and comminuted fractures.
12
3
4
Four diameter options to fit on cervical, thoracic or lumbar spine;
Two length options and the possibility to shorten the spacer height in according to each patient needs, by cutting the desired size;
ROM Rings are placed on the spacer extremities to increase biomechanical resistance and reduce risks of implant insertion into the vertebral surfaces;
The 8º lordosis ROM Ring is used with Ø25 mm spacer to adapt the implant to the curvature of the lumbar spine and,
Large space for bone graft to promote intervertebral fusion.
ADVANTAGES AND CHARACTERISTICS
5
08 | GMReis
3
2
1
4
5
Made of titanium alloy (ti-6al-4v) conform ASTMF136
3
2
THORACIC, LUMBAR AND SACRAL FIXATION - POSTERIOR APPROACH
EXACTOPedicular Internal Fixation System With Polyaxial Schanz Pins
The Schanz Pins fixation system allows using the pins upper extension to fracture reduction;
The polyaxial connectors facilitates the system setting-up and helps to restore the anatomy of fractured vertebra and treated segment;
The Spondylo Pedicle Pins allow spondylolisthesis correction;
Connectors developed for using in the caudal extremity of the rods in sacral spine fixation;
The Crosslink hook increases fixation hardness and biomechanical stability and,
After the final locking, the pins are cutted off to reduce the system profile.
ADVANTAGES AND CHARACTERISTICS
150-21
150-20
150-22
Pedicular Pins
Ø5.0 mm
Ø6.2 mm
Ø7.0 mm
150-03
150-02
150-04
Spondylo Pedicular Pins
Ø5.0 mm
Ø6.2 mm
Ø7.0 mm
GMReis | 08
Placa Cervical Anterior Sophira Ø6.0 mm Rod
112-19
112-21
112-23
112-24
112-25
112-26
50 mm
70 mm
90 mm
110 mm
130 mm
150 mm
112-46
112-47
Ø3.2 mm Transversal Rod
Ø3.2 x 60 mm
Ø3.2 x 80 mm
112-44
Crosslink Hook Pedimax II
EXACTO fixation system was developed for treatment of pathologies of thoracic, lumbar and sacral spine. EXACTO is specifically indicated for procedures of fracture and spondylolisthesis correction.
GMReis | 09
1
2
3
4
5
6
150-01
150-30
Exacto Connectors
Standard
Sacral
Made of titanium alloy (ti-6al-4v) conform ASTMF136
PEDIMAX IITitanium Pedicle Screws System for thoracic,lumbar and sacral spine posterior arthrodesis
PEDIMAX II was developed for thoracic, lumbar and sacral spine posterior arthrodesis, for treating spinal pathologies: disc degenerative diseases, spondylolisthesis, trauma, tumor, stenosis, pseudarthrosis and deformities.
10 | GMReis
PEDIMAX II | PercutaneousCannulated Pedicle Polyaxial Screws for minimally invasive technique
PEDIMAX II | SpondylolisthesisPedicle Polyaxial Screws with extended tabsfor spondylolisthesis reduction
Syringe with Cimentechbone cement
Porous cementdelivery device
Porous Pedicle Screw forosteoporotic bone
1
2
7
6
GMReis indicates Cimentech bone cement (page 17) to be used with Porous*.*Product sold separately.
PEDIMAX II | POROUS Cannulated and perforated pedicle screw for bone cement injection.
THORACIC, LUMBAR AND SACRAL FIXATION - POSTERIOR APPROACH
Made of titanium alloy (ti-6al-4v) conform ASTMF136
This product is indicated in cases of augmentation procedure in osteoporotic patients treatment
5
GMReis | 11
Pedimax II Percutaneous Polyaxial Pedicle Screw
Ø5.5 x 30 mm
Ø5.5 x 35 mm
Ø5.5 x 40 mm
Ø5.5 x 45 mm
Ø6.2 x 35 mm
Ø6.2 x 40 mm
Ø6.2 x 45 mm
Ø6.2 x 50 mm
Ø7.0 x 30 mm
Ø7.0 x 35 mm
Ø7.0 x 40 mm
Ø7.0 x 45 mm
Ø7.0 x 50 mm
152-55-30
152-55-35
152-55-40
152-55-45
152-62-35
152-62-40
152-62-45
152-62-50
152-70-30
152-70-35
152-70-40
152-70-45
152-70-50
50.0 mm
55.0 mm
80.0 mm
90.0 mm
Ø6.0 Percutaneous Rod
152-75
152-76
152-88
152-89
Pedimax II Polyaxial Pedicle Screw
Spondylolisthesis Percutaneous
Ø5.5 x 30 mm
Ø5.5 x 35 mm
Ø5.5 x 40 mm
Ø5.5 x 45 mm
Ø6.2 x 35 mm
Ø6.2 x 40 mm
Ø6.2 x 45 mm
Ø6.2 x 50 mm
Ø7.0 x 30 mm
Ø7.0 x 35 mm
Ø7.0 x 40 mm
Ø7.0 x 45 mm
Ø7.0 x 50 mm
152-55-30-E
152-55-35-E
152-55-40-E
152-55-45-E
152-62-35-E
152-62-40-E
152-62-45-E
152-62-50-E
152-70-30-E
152-70-35-E
152-70-40-E
152-70-45-E
152-70-50-E
Pedimax II Porous Pedicle Screw
Polyaxial
Ø5.5 x 30 mm
Ø5.5 x 35 mm
Ø5.5 x 40 mm
Ø5.5 x 45 mm
Ø5.5 x 50 mm
Ø5.5 x 55 mm
Ø5.5 x 60 mm
Ø6.2 x 35 mm
Ø6.2 x 40 mm
Ø6.2 x 45 mm
Ø6.2 x 50 mm
Ø7.0 x 40 mm
Ø7.0 x 45 mm
Ø7.0 x 50 mm
221-55-30
221-55-35
221-55-40
221-55-45
221-55-50
221-55-55
221-55-60
221-62-35
221-62-40
221-62-45
221-62-50
221-70-40
221-70-45
221-70-50
Porous - Single Use Cement Delivery Device
221-102
Ø5.5 x 30 mm
Ø5.5 x 35 mm
Ø5.5 x 40 mm
Ø5.5 x 45 mm
Ø5.5 x 50 mm
Ø6.2 x 30 mm
Ø6.2 x 35 mm
Ø6.2 x 40 mm
Ø6.2 x 45 mm
Ø6.2 x 50 mm
Ø6.2 x 55 mm
Ø6.2 x 60 mm
Ø7.0 x 30 mm
Ø7.0 x 35 mm
Ø7.0 x 40 mm
Ø7.0 x 45 mm
Ø7.0 x 50 mm
Ø7.0 x 55 mm
Ø7.0 x 60 mm
Ø8.0 x 40 mm
Ø8.0 x 45 mm
Pedimax II MonoaxialPedicle Screw
176-10-30
176-10-35
176-10-40
176-10-45
176-10-50
176-11-30
176-11-35
176-11-40
176-11-45
176-11-50
176-11-55
176-11-60
176-12-30
176-12-35
176-12-40
176-12-45
176-12-50
176-12-55
176-12-60
176-13-40
176-13-45
Pedimax II Pedicle Screw
Polyaxial
176-45-20
176-45-25
176-45-30
176-45-35
176-45-40
176-45-45
176-50-30
176-50-35
176-50-40
176-50-45
176-50-50
176-50-55
176-50-60
176-60-30
176-60-35
176-60-40
176-60-45
176-60-50
176-60-55
176-60-60
176-70-30
176-70-35
176-70-40
176-70-45
176-70-50
176-70-55
176-70-60
Ø4.5 x 20 mm
Ø4.5 x 25 mm
Ø4.5 x 30 mm
Ø4.5 x 35 mm
Ø4.5 x 40 mm
Ø4.5 x 45 mm
Ø5.5 x 30 mm
Ø5.5 x 35 mm
Ø5.5 x 40 mm
Ø5.5 x 45 mm
Ø5.5 x 50 mm
Ø5.5 x 55 mm
Ø5.5 x 60 mm
Ø6.2 x 30 mm
Ø6.2 x 35 mm
Ø6.2 x 40 mm
Ø6.2 x 45 mm
Ø6.2 x 50 mm
Ø6.2 x 55 mm
Ø6.2 x 60 mm
Ø7.0 x 30 mm
Ø7.0 x 35 mm
Ø7.0 x 40 mm
Ø7.0 x 45 mm
Ø7.0 x 50 mm
Ø7.0 x 55 mm
Ø7.0 x 60 mm
Pedimax II Crosslink Hook
112-44
Pedimax II Locking Cap
176-10
1
2
3
The set comes with polyaxial and monoaxial screws with different diameters and lengths to supply any surgical needs;
Internal locking cap provides higher stability to system fixation;
Self-tapping screws that reduce surgery time;
The Crosslink hook increases fixation hardness and biomechanical stability;
Cannulated polyaxial screws for percutaneous implantation;
Polyaxial screws with extended tabs, solid shaft and cannulated, for spondylolisthesis reduction and,
Polyaxial screws, cannulated with distal hole shaft and delivery device to bone cement augmentation for treatment of osteoporotic patients.
ADVANTAGES AND CHARACTERISTICS
4
5
6
7
Pedimax II Spondylolisthesis Polyaxial Pedicle Screw
Ø5.5 x 30 mm
Ø5.5 x 35 mm
Ø5.5 x 40 mm
Ø5.5 x 45 mm
Ø5.5 x 50 mm
Ø6.2 x 35 mm
Ø6.2 x 40 mm
Ø6.2 x 45 mm
Ø6.2 x 50 mm
Ø7.0 x 30 mm
Ø7.0 x 35 mm
Ø7.0 x 40 mm
Ø7.0 x 45 mm
Ø7.0 x 50 mm
175-55-30
175-55-35
175-55-40
175-55-45
175-55-50
175-62-35
175-62-40
175-62-45
175-62-50
175-70-30
175-70-35
175-70-40
175-70-45
175-70-50
Ø6.0 Longitudinal Rod
40.0 mm
50.0 mm
60.0 mm
70.0 mm
80.0 mm
90.0 mm
100.0 mm
110.0 mm
130.0 mm
150.0 mm
180.0 mm
210.0 mm
380.0 mm
450.0 mm
112-18
112-19
112-20
112-21
112-22
112-23
112-122
112-24
112-25
112-26
112-27
112-28
112-85
112-86
Ø3.5 / 6.0 mm Left
Ø3.5 / 6.0 mm Right
Ø6.0 / 4.5 mm Left
Ø6.0 / 4.5 mm Right
Ø6.0 / 6.0 mm Left
Ø6.0 / 6.0 mm Right
Rod/Rod Connector
134-228
134-229
134-97
134-98
134-06-06-E
134-06-06-D
60.0 mm
80.0 mm
100.0 mm
Ø3.2 Transversal Rod
112-46
112-47
112-48
3
4
PEEK LUMBAR INTERBODY SPACERS
PLIFIX PEEKPosterior Lumbar Interbody Fusion Spacer
Plifix PEEK
179-01P
179-02P
179-03P
179-04P
179-05P
179-06P
179-07P
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm
15 mm
TLIFIX PEEKTransforaminal Lumbar Interbody Fusion Spacer
187-01P
187-02P
187-03P
187-04P
187-05P
187-06P
08 mm
09 mm
10 mm
11 mm
12 mm
13 mm
Tlifix PEEK
ADVANTAGES AND CHARACTERISTICS"Toothed" surfaces provide resistance to implant migration;
The titanium markers allow to assess the exact positioning of the implant by x-ray visualization;
Wide central canal for bone graft;
The set comes with seven implants height options to allow a better adaptation on patient anatomy and,
Implantation by posterior approach.
1
2
3
The Plifix PEEK and Tlifix PEEK spacers were developed for discectomy and lumbar fusion on spine, to restore intervertebral height and support axial weight on treated level.
1
2
3
ADVANTAGES AND CHARACTERISTICS"Toothed" surfaces provide resistance to implant migration;
The titanium markers allow to assess the exact implant positioning, by x-ray visualization;
Wide central canals for bone graft;
The set comes with six implants height options to allow a better adaptation on patient anatomy;
Bullet nose for an easier implant insertion;
Anatomical curvature and lordotic angulation to fit perfectly on the intervertebral space and having maximum contact between the implant and the vertebral surface and,
Implantation by transforaminal approach.
4
5
4
5
6
7
12 | GMReis
Made of PEEK conform ASTMF2026
23 1
h
5
3
21
6
h
COD h
COD h
DYNAFIX PEEKPEEK Interspinous Space Spacer/Plate
INTERSPINOUS SPACER
Dynafix PEEK was developed for lumbosacral spine stabilization/ decompression procedures, to restore and maintain its biomechanical properties. The device is placed in interspinous space, partially restrincting mobility on treated level and reducing tension on posterior joints.
The interspinous spacer extends the segmental extension on intervertebral foramen, treating radicular spinal stenosis;
The set comes with four size options and the spacer has anatomical shape to allow better placement on interspinous process;
The lateral wings are used for spacer fixation on spinous process, implant is designed to allow multilevel fixation;
The implants shape and raw matter provide physiological alike elasticity, improves implant flexibility, weight distribution and impact absorption and,
The titanium identification pin allows to assess the exact positioning of the implant by x-ray visualization.
1
GAMA CABLETitanium microfilament cerclage wire
Gama Cable is indicated to fix Dynafix PEEK Interbody Spacer in the spinous process;
The end of the cable (100 mm) is solid and can be shaped for easier cerclage;
Gama Cable is 420 mm length, has high resistance and excellent biocompatibility and,
GMReis Gama Cable set has its own instrumental devices for tensioning, locking and cuting off the cable excess.
1
2
3
4
ADVANTAGES AND CHARACTERISTICS
2
3
4
5
GMReis | 13
2
Dynafix PEEK
162-07-P
162-01-P
162-02-P
162-03-P
08 mm
10 mm
12 mm
14 mm
Placa Cervical Anterior Sophira
130-30
Gama Cable Ø1.1 mm
Made of PEEK conform ASTMF2026
2
3
5
h
Made of titanium alloy (ti-6al-4v) conform ASTMF136
COD h
KYPHOPLASTY
Restore Set
CIF-10RET
CIF-15RET
CIF-20RET
10 mm
15 mm
20 mm
RESTORE SETSterile instrumental set for kyphoplasty procedures
RESTORE utilizes orthopedic balloons for anatomical reduction of fractured vertebra, restoring vertebral body height and correcting angular deformity;
The cavities formed by the balloons, allow a safe and controlled filling of bone cement , under low-pressure, and in pre-defined quantity, reduce risk of leakage;
The balloons resist up to 300 psi on first use, and the pressure growth can be monitored on a digital display;
The balloons come in three length options: 10 , 15 and 20 mm and,
Full instrumental set for simultaneous (bilateral) kyphoplasty with two balloons, through the fractured vertebra pedicles.
2
3
4
RESTORE is a minimally invasive procedure designed to repair vertebral compression fractures, normally caused by osteoporosis or tumor.
ADVANTAGES AND CHARACTERISTICS
14 | GMReis
1
5
3
5
4GMReis indicates Cimentech bone cement (page 17) to be used with the Restore Set*.*Product sold separately.
1
2
BPS-P SETSterile instrumental set for vertebroplastyprocedures, with transpedicular approach
151-20
151-50
BPS-A Set
BPS-P Set
Percutaneous Single-Use Set
Vertebroplasty procedures consist in a percutaneous injection of bone cement into the vertebral body for treating fractures caused by: osteoporosis, tumor and trauma.
VERTEBROPLASTY
BPS-A SETSterile instrumental set for vertebroplasty procedures,with parapedicular (vertebral body) approach
GMReis |15
Simple, safe and efficient instrumental set that comes with two approach options: transpedicular and parapedicular (vertebral body); for adequating the procedure and the surgical planning to the fracture specifications;
The larger diameter cannula from BPS-A set allows to make bone biopsy and,
The BPS-P set, with transpedicular approach, can be used to inject bone cement into osteoporotic vertebrae in order to enhance fixation with pedicular screws.
1
2
ADVANTAGES AND CHARACTERISTICS
5
10
15
20ml
5
10
15
20
ml
GMReis indicates Cimentech bone cement (page 17) to be used with BPS-A and BPS-P.*Product sold separately.
2
3
BIOLOGICALS
16 | GMReis
Sponjosa
New Osteo’sá - hemihydrate
crystalline structure
Sponjosa
167-01
167-02
167-24
167-27
167-29
Grain 10 cc
Grain 20 cc
Cunha 7 mm
Cunha 10 mm
Cunha 12 mm
New Osteo
149-01-05
149-01-10
149-01-20
149-05-05
149-05-10
149-05-20
Dust 5 cc
Dust 10 cc
Dust 20 cc
Grain 5 cc
Grain 10 cc
Grain 20 cc
Scan
ning E
lectro
nMi
crosco
py: 5
0x
Cancellous bonestructure
Sponjosastructure
ANVISA/MS: 10247700020
New Osteo
Antibiotic
New Osteo+
Antibiotic
Controlled liberation
InfectedBone tissue
INFECTION TREATMENT
New Osteo
ANVISA/MS: 10247700020
Synthetic bone graft made of calcium sulfate.Non-toxic, biocompatible, biodegradable, radiopaque, osteoconductive and bioresorbable.
New Osteo can be used with antibiotics to control and prevent local osteomyelitis.
Synthetic bone graft made of beta-tricalcium phosphate (ß-TCP)Biactive, biocompatible, biodegradable, radiopaque, osteoconductive and bioresorbable.Sponjosa is indicated to fulfill bone cavities or bone deformities caused by trauma or surgical intervention.
CimentechPolymerizable radiopaque bone cement, non-resorbable, made of acrylic compounds and consisting of a liquid component (methyl methacrylate - MMA) and a powder component (Polymethyl Methacrylate – PMMA + Barium Sulfate – BaSO ).4
Cimentech is developed in according to ABNT NBR ISO 5833;
Cimentech has initially low viscosity (what makes syringe charge easier), high intrusion (fundamental for its fixation on bone tissue) and higher radiopacity than other bone cements and,
The bone cement polymer izat ion occurs progressively between 3 and 15 minutes depending on the enviroment conditions.
1
3
ADVANTAGES AND CHARACTERISTICS
Cimentech is indicated for these procedures: vertebroplasty, kyphoplasty and as an anchor for restoring mechanical conditions in osteoporotic bones, using a specific implant.
2
Cimentech
250-01
Cimentech
Barium sulfate20%
Another bone cement
10%
Barium sulfate
X-Ra
y
Radiopacity
Syringe with Cimentechbone cement
Porous Pedicle Screw forosteoporotic bone
17 | GMReis
Spine
Cata
log |
JUL/
2018
GMREIS Pierre Simon de Laplace Avenue, 600 - Lote 3 Quadra F - Techno ParkZIP CODE: 13069-320 | Campinas/SP - BrazilPhone: +55 (19) 3765 9900
Export [email protected] [email protected]
Any information in this catalog can be changed at any moment.Please, check our website www.gmreis.com.br to verify them.GMReis, 2018. All rights reserved.
GMReis.com.br