TechniFactory INOS

INOS

TechniFactory

Enquiry wizard

1. Save money and time• Only one contact person for all

heatexchanger tube needs

• Avoid transport damages to the long straight tubes on the way to the bending facility

• No additional transport costs to the bending company

• Benefit from time saving of parallel production of straight tubes and U-tubes

• Request spare tubes, which we stock for you

• Save space and time for assembling the heat exchangers as the U-tubes can be removed radiuswise from the wooden combs

2. Surface quality• You receive tubes which are free from oil

and grease as well as free from debris

• You receive a metallic bright surface without discolouration on the inner and outer tube

• In line with our general terms and conditions of sale we guarantee defect free materials and good workmanship

3. Heat treatment of bending area• On request you can choose

between solution or stress relief annealing depending on the material standard

• On demand, we also include the annealing charts

4. Packing• U-tubes are safely packed in

transport-racks using wooden combs to avoid damage

• Faster and more efficient inbound material inspection through separate packing by radius

5. Quality / documentation• Detailed test certificate with all the

important information incl. measures of the bend along with the inspection certificate 3.1

• On request we offer Ultrasonic-Test, Dye-Penetrant-Test, Hydraulic Pressure Test and Steel Ball Test

• a warranty of up to 3 years*

Realise the following benefits by purchasing U-Tubes @TPS:

TECHNICAL DETAILS

• We bend tubes up to any diameter

• Radii: 1,0 x OD (except 2,0 x OD for Titanium tubes) up to 1,20 m (Other radii on request)

• No restrictions in leg lengths

TechniFactory INOS is able to provide straight and U-Tubes in a very short time frame.

* In line with our general terms and conditions of sale we guarantee defect free materials and good workmanship.

SPEED

It´s time what counts!When reliability and quality are given.

Your stock supply source no. 1.

See more of our Pipe, Tubulars and Accessories supply range at www.tpsd.de

We keep the a very comprehensive inventory of straight tubes for heatexchangers in length up to 18 meters (60ft) in following grades and sizes, available - in metric and imperial dimension from 10,00 x 1,00 mm up to 38,1 x 3,41 mm respectively ½“ x 16 BWG/SWG up to 1 ½“ x x10 BWG/SWG:

ASTM/ ASME A/SA 179/ DIN 17175 ST 35.8/I/ EN 10216-2 P 235 GH

ASTM/ ASME A/SA 192

ASTM/ ASME S/SA 334 Gr. 1 / Gr. 6

ASTM/ ASME A/SA 199 T5/ ASTM/ ASME A/SA 213 T5

ASTM/ ASME A/SA 199 T9/ ASTM/ASME A/SA 213 T9

ASTM/ ASME A/SA 199 T11/ ASTM/ASME A/SA 213 T11

ASTM/ ASME A/SA 214

ASTM/ ASME B/ SB 111 Alloy 68700/ BS 2871 Part 3 CZ 110

ASTM/ ASME B/ SB 111 Alloy 44300/ BS 2871 Part 3 CZ 111

ASTM/ASME B/SB 111 Alloy 70600/ BS 2871 Part 3 CN 102

ASTM/ ASME B/SB 111 Alloy 71500/ BS 2871 Part 3 CN 107

ASTM/ ASME A/SA 213 TP304/304L

ASTM/ ASME A/SA 213 TP316/316L

ASTM/ ASME A/SA 213 TP321

ASTM/ ASME A/SA 213 TP316Ti

Seamless Longitudinal Fin Tubes ASTM A 179/ DIN 17175 ST 35.8/I

ASTM /ASME B338/SB338 TI Grade 2

It always happens, whether in Power Generation, Che-mical or Petrochemical, Pharmaceutical or Offshore and Marine Industry, the efficiency of your installation and process cycle drops unexpectedly and in many of those situations the route cause are clogged tubes in the hea-texchanger or cooling system.

Even proper preventive maintenance and a safety stock of tubular materials is not always a sufficient solutions to the problem. Furthermore it is cost and capital intensive.

Therefore we like to introduce you to our TechniSpeed program particularly designed for the needs of the hea-texchanger and cooler builder, maintenance and user!

SPEEDSpeak to us to get more information. Try

us to get the proof of our quality, reliability, competitiveness, service and speed.

TechniSpeed - the alternative to your own inventories?

TPS-Technitube Röhrenwerke GmbH Julius-Saxler-Str. 7 | 54550 Daun/Germany

Tel.: +49 65 92 71 20 | Fax: +49 65 92 1305

www.technistock.de | www.tpsd.de | E-Mail: service@tpsd.de

Globe

A company of Techniropa Holding GmbH and the LEPPER foundation.

NEED U-TUBES?With our fast and reliable service we are able to offer you the bending services, acc. to your bending schedule and bending plan and of course heat treament of the bents and all testing and packing requirements acc. to customer needs.

2019

TechniStock