LINCOLN SERIES MODULAR STREET LIGHTLED LUMINAIRE IP66

IGHTING

®

SHANGHAI P&Q LIGHTING CO., LTD

SPECIFICATION

PRODUCT NAME: LINCOLN ⅢVERSION: 240WDIMENSION(MM): 837×320×126BODY MATERIAL: ALUMINIUMDIFFUSER MATERIAL: TEMPERED GLASS

PRODUCT NAME: LINCOLN ⅡVERSION: 160WDIMENSION(MM): 705×320×126BODY MATERIAL: ALUMINIUMDIFFUSER MATERIAL: TEMPERED GLASS

PRODUCT NAME: LINCOLN ⅣVERSION: 320WDIMENSION(MM): 970×320×126BODY MATERIAL: ALUMINIUMDIFFUSER MATERIAL: TEMPERED GLASS

PRODUCT NAME: LINCOLN ⅠVERSION: 80WDIMENSION(MM): 572×320×126BODY MATERIAL: ALUMINIUMDIFFUSER MATERIAL: TEMPERED GLASS

CM

LISTEDUSC ta40IP66

CATALOGUE

PARTS LISTS & EXPLODED ASSEMBLY DRAWINGS PAGE 3

QUICK SPECIFICATION & LIGHT DISTRIBUTION PAGE 5

SPECIFICATION & INSTALLATION INSTRUCTION PAGE 6

PACKING INFORMATION & CONTACT INFORMATION PAGE 8

PARTS LISTS & EXPLODED ASSEMBLY DRAWINGS

MODULAR LED SOURCE PARTS LIST

1. ALUMINIUM BASE ×1 2. LED 20W COB CHIP ×4

3. LENS ×4

4. REFLECTOR ×1

5. TEMPERED GLASS ×1

6. ALUMINIUM COVER & SILICONE SPONGE GASKET ×1

LINCOLNⅠ PARTS LIST

1. ALUMINIUM GEAR BOX COVER ×1

2. ALUMINIUM GEAR TRAY & DRIVER ×1 3. ALUMINIUM BODY BASE ×1

4. VARIABLE-ANGLE MOUNTING BRACKET ×1

5. MOUNTING BRACKET COVER ×1

6. ALUMINIUM BODY PART ×2

7. MODULAR LED SOURCE KIT ×1

2

3

5

4

6

6

1

3

6

5

2

4

7

7

LINCOLNⅡ

7

LINCOLNⅠ

1

2

3

5

4

1 LINCOLNⅡ PARTS LIST

1. ALUMINIUM GEAR BOX COVER ×1

2. ALUMINIUM GEAR TRAY & DRIVER ×1 3. ALUMINIUM BODY BASE ×1

4. VARIABLE-ANGLE MOUNTING BRACKET ×1

5. MOUNTING BRACKET COVER ×1

6. ALUMINIUM BODY PART ×2

7. MODULAR LED SOURCE KIT ×2

MODULAR LED SOURCE

6

6

7

7

7

7

7

7

7

LINCOLNⅢ

LINCOLNⅣ

2

3

5

4

1

2

3

5

4

1

LINCOLNⅢ PARTS LIST

1. ALUMINIUM GEAR BOX COVER ×1

2. ALUMINIUM GEAR TRAY & DRIVER ×1 3. ALUMINIUM BODY BASE ×1

4. VARIABLE-ANGLE MOUNTING BRACKET ×1

5. LAMP HOLDER COVER ×1

6. ALUMINIUM BODY PART ×2

7. MODULAR LED SOURCE KIT ×3

LINCOLNⅣ PARTS LIST

1. ALUMINIUM GEAR BOX COVER ×1

2. ALUMINIUM GEAR TRAY & DRIVER ×1 3. ALUMINIUM BODY BASE ×1

4. VARIABLE-ANGLE MOUNTING BRACKET ×1

5. LAMP HOLDER COVER ×1

6. ALUMINIUM BODY PART ×2

7. MODULAR LED SOURCE KIT ×3

PARTS LISTS & EXPLODED ASSEMBLY DRAWINGS

QUICK SPECIFICATION & LIGHT DISTRIBUTION

FEATURES

● UNIQUE DESIGN USING MODULAR LED SOURCE KIT WITH HIGH EFFICIENCY LED CHIPS ● RANGE OF LUMEN PACKAGES AND LIGHT DISTRIBUTIONS● INTEGRAL DRIVER WITH AUTOMATIC TEMPERATURE CONTROLLER TO PREVENT OVER HEATING IN HIGH AMBIENT ENVIRONMENTS● LOW PROFILE DESIGN REDUCES WIND RESISTANCE AND MAXIMISES HEAT DISSIPATION FOR OPTIMUM PERFORMANCE● DIE-CAST, LOW COPPER ALUMINIUM HOUSING WITH POLYESTER POWDERCOAT FINISH, RESISTANT TO CORROSION AND SALINE ENVIRONMENTS● UNIQUE MOUNTING BRACKET CAN BE POSITIONED FOR POST OR ARM WITH DIA. 60-63MM● INSTALLATION FEATURES INCLUDE SAFETY CUT-OFF SWITCH, IP66 RAPID ELECTRICAL CONNECTOR, CLASS II ELECTRICAL CLASSIFICATION ONLY.● CONTROL OPTIONS, DIMMING, MIDNIGHT FUNCTION AVAILABLE.

APPLICATIONS

HIGHWAY, URBAN ROAD, PAVEMENT

CERTIFICATE CERTIFICATE NO.----------------------------------------------------------------------------------------------------------CE BCTC-2011009558-SZJR BCTC-2011009559-SZJR IP66 BCTC-2011009792-SZJR ETL 150801588SHA-001

PRODUCTS QUICK INFORMATION

VERSION DIM (MM) MASS (KG)---------------------------------------------------------------------------------------------------------- 80W LED 572×320×126 3.5 160W LED 705×320×126 5.0 240W LED 837×320×126 6.5320W LED 970×320×126 8.0

DIMENSION DRAWINGS(MM)

——C0-180° ——C90-270°

0 15

30

345

330

315 45

300 60

285 75

90270

255 105

9,000

7,500

6,000

4,500

1,500

3,000

0 15

30

345

330

315 45

300 60

285 75

90270

255 105

9,000

7,500

6,000

4,500

1,500

3,000

0 15

30

345

330

315 45

300 60

285 75

90270

255 105

9,000

7,500

6,000

4,500

1,500

3,000

0 15

30

345

330

315 45

300 60

285 75

90270

255 105

9,000

7,500

6,000

4,500

1,500

3,000

126.0

320.0

INSTALLATION OR ASSEMBLY INSTRUCTIONS

PLEASE READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR MAINTAINING THISEQUIPMENT. THESE INSTRUCTIONS AND LOCAL REGULATIONS(WHERE APPLICABLE), BY AN AUTHORISED AND LICENCED ELECTRICIAN.

IMPORTANT – THE PRODUCT MUST BE MAINTAINED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURE’S INSTRUCTIONS, FAILURE TO DO SO MAY DAMAGE THE PRODUCT AND SERVICES. IT IS STRONGLY RECOMMENDED THAT THIS IMPORTANT NOTE BE COMMUNICATED TO THE OWNER AND OR OPERATOR OF THE INSTALLATION AT THE TIME OF SITE COMMISSIONING. GOOD PRACTICE DOES NOT RECOMMEND THE 24/7 USE OF PRODUCTS WITHOUT THE APPLICATION OF SUITABLE SWITCH CYCLE INTERVALS. P&Q IS NOT RESPONSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITH THE RECOMMENDED PROCEDURES. ALL PRODUCTS SHOULD BE THOROUGHLY CLEANED ON A REGULAR BASIS TO ENSURE THE OPTICAL PERFORMANCE, TOGETHER WITH THE ELECTRICAL,MECHANICAL AND STRUCTURAL INTEGRITY AS DESIGNED, IS MAINTAINED THROUGHOUT THE SERVICE LIFE OF THE PRODUCT.

“CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR”

1. STORAGE: PRIOR TO INSTALLATION PRODUCTS ARE TO BE STORED IN COOL AND DRY CONDITIONS.

SPECIFICATION & INSTALLATION INSTRUCTION

1

SPECIFICATION LIST

LINCOLN Ⅰ LINCOLNⅡ 1 LINCOLN Ⅲ LINCOLN Ⅳ ————————————————————————————————————————————————————————————————POWER ————————————————————————————————————————————————————————————————NOMINAL VOLTAGE ————————————————————————————————————————————————————————————————POWER FACTOR ————————————————————————————————————————————————————————————————PCB CONNECTION ————————————————————————————————————————————————————————————————CHIPS ————————————————————————————————————————————————————————————————CHIP QUANTITY ————————————————————————————————————————————————————————————————DRIVER OUTPUT ————————————————————————————————————————————————————————————————MODULAR LED SOURCE KIT————————————————————————————————————————————————————————————————CCT ————————————————————————————————————————————————————————————————CRI ————————————————————————————————————————————————————————————————LUMINOUS FLUX ————————————————————————————————————————————————————————————————EFFICIENCY ————————————————————————————————————————————————————————————————BEAM ANGLE ————————————————————————————————————————————————————————————————BODY MATERIAL ————————————————————————————————————————————————————————————————DIFFUSER MATERIAL ————————————————————————————————————————————————————————————————IP RATE ————————————————————————————————————————————————————————————————AMBIENT TEMPERTURE ————————————————————————————————————————————————————————————————STORAGE TEMPERATURE ————————————————————————————————————————————————————————————————INNER BOX DIM(MM)

80W AC180-240V ＞0.95 4 PARALLELS COB 20W

4PCS 2.65A

1PCS

3000-6000K

＞80

6800LM

85LM/W

120°

ALUMINIUM ADC12

TEMPERED GLASS

IP65

-25°C TO 40°C

-25°C TO 40°C

597×355×130

160W AC180-240V ＞0.95 8 PARALLELS COB 20W

8PCS 4.2A

2PCS

3000-6000K

＞80

13600LM

85LM/W

120°

ALUMINIUM ADC12

TEMPERED GLASS

IP65

-25°C TO 40°C

-25°C TO 40°C

730×355×130

240W AC180-240V ＞0.95 12 PARALLELS COB 20W

12PCS 6.7A

3PCS

3000-6000K

＞80

20400LM

85LM/W

120°

ALUMINIUM ADC12

TEMPERED GLASS

IP65

-25°C TO 40°C

-25°C TO 40°C

862×355×130

320W AC180-240V ＞0.95 16 PARALLELS COB 20W

16PCS 8.9A

4PCS

3000-6000K

＞80

27200LM

85LM/W

120°

ALUMINIUM ADC12

TEMPERED GLASS

IP65

-25°C TO 40°C

-25°C TO 40°C

995×355×130

INSTALLATION INSTRUCTION

1

2. PRODUCT SPECIFICATION:

LINCOLN Ⅰ 80W LINCOLNⅡ 160W LINCOLN Ⅲ 240W LINCOLN Ⅳ 320W———————————————————————————————————————————————————————————————IP RATING IP65 IP65 IP65 IP65———————————————————————————————————————————————————————————————NOMINAL VOLTAGE AC180-240V AC180-240V AC180-240V AC180-240V ———————————————————————————————————————————————————————————————LINE CURRENT 2.65A 4.2A 6.7A 8.9A ———————————————————————————————————————————————————————————————

3. INSTALLATION DRAWINGS

STEP 2: LOCK THE GEAR BOX COVER BRACKET

STEP 2: MAKE THE CABLE CROSS THE CABLE KEEPER CLOSE THE CABLE KEEPER

STEP 2: CONNECT THE CABLES

STEP 2: FINISH

PACKING INFORMATION & CONTACT INFORMATION

CONTACT INFORMATION

ADDRESS————————————————————————————————————————————————————————————————COMPANY ADDRESS ROOM 507, NO. 423 XINCUN RD. PUTUO DIST. SHANGHAI, CHINA------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------FACTORY ADDRESS NO. 238 HENGZHAI RD. SHESHAN TOWN, SONGJIANG DIST. SHANGHAI, CHINA-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

TELEPHONE NO.————————————————————————————————————————————————————————————————BUSINESS OFFICE +86 21 66057753 +86 21 66057783-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------QUALITY DEPARTMENT +86 21 66057753-8015-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------COMPLAINT & ADVISE +86 21 66057753-8008-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

MAIL BOX————————————————————————————————————————————————————————————————PRODUCTS CONSULTANT WILLIAM@PNQLIGHTING.COM DAVID@PNQLIGHTING.COM------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------QUALITY & DESIGN INFORMATION JACK@PNQLIGHTING.COM------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

1. FOAM FILLED COVER

2. FOAM FILLED BOTTOM

3. LINCOLN Ⅰ: 597×355×130MM CARTON LINCOLN Ⅱ: 730×355×130MM CARTON LINCOLN Ⅲ: 862×355×130MM CARTON LINCOLN Ⅳ: 995×355×130MM CARTON

2. PRODUCT SPECIFICATION:

LINCOLN Ⅰ 80W LINCOLNⅡ 160W LINCOLN Ⅲ 240W LINCOLN Ⅳ 320W———————————————————————————————————————————————————————————————IP RATING IP65 IP65 IP65 IP65———————————————————————————————————————————————————————————————NOMINAL VOLTAGE AC180-240V AC180-240V AC180-240V AC180-240V ———————————————————————————————————————————————————————————————LINE CURRENT 2.65A 4.2A 6.7A 8.9A ———————————————————————————————————————————————————————————————

3. INSTALLATION DRAWINGS

4. ELECTRICAL FAULT FINDING AND RELACEMENT: THE SUPPLY MUST BE ISOLATED BEFORE OPENING THE LUMINAIRE. IF ALL CONNECTIONS ARE VERIFIED TO BE CORRECT, THE PRODUCTS ENVIRONMENT MAY BE HAVING AN ADVERSE EFFECT TO THE COMPONENTS. IF THIS IS THE CASE PLEASE CONTACT YOUR SUPPLIER FOR A MORE SUITABLE REPLACEMENT. ANY FAULT FINDING MUST BE DONE BY A FULLY QUALIFIED ELECTRICIAN AND, IF CARRIED OUT WITH THE LUMINAIRE IN PLACE, UNDER A PERMIT TO WORK. WITH REPLACEMENT OF ANY PART ENSURE THAT WIRES AND CONNECTIONS ARE CHECKED, AND ANY WIRE SLEEVING REFITTED.

PACKING INFORMATION

1

2

3