SOUTHERN CROSS SXVS VERTICAL SHAFT DRIVEN CENTRIFUGAL SLURRY PUMPS HEAVY DUTY, RELIABLE SLURRY PUMPING FROM SUMPS AND PITS FEATURES APPLICATIONS Transfer of Abraisive and High Density Slurries from Sumps and Pits in: Mining Industry Civil Construction Coal Preperation Mineral Processing Chemical Processing Sugar Industry OPERATING LIMITS Capacity 10-1000m 3 /hour Head up to 40 metres Discharge 40-250mm Max. Solid Size 50mm Motor Sizes 3-200kW Operating Speed 400-2200RPM Pumped Liquid Abraisive Slurries High Density Slurries Solids Laden Water SXVS-IF-0113 Cantilevered design eliminates shaft sealing requirements. Column and discharge pipe options available including composite materials. Cantilever shaft length up to 2400mm. Deep sump variant available for applications where cantiler design is not suitable. Quick and easy changeover of wet end. Drive end bearings have no contact with pumped product, allowing greater wear life. Wet end stub shaft options available for severe duty applications. Wide range of wet end construction material options available to suit any application and installation environment. Removeable upper strainer. Rubber lined cast iron lower strainer reduces blockages. OPTIONS Stub shaft options for severe duty applications. Cantilevered shaft or extension shaft with column bearings. Direct coupled or belt drive with set speed or variable frequency operation. Wet end, column and discharge pipe materials of construction.

SOUTHERN CROSS SXVS VERTICAL SHAFT DRIVEN CENTRIFUGAL ... · SOUTHERN CROSS SXVS VERTICAL SHAFT DRIVEN CENTRIFUGAL SLURRY PUMPS ... Deep sump variant available for ... Pump Casing

Download PDF Report

Upload
phungkiet
View
227
Download
5

Embed Size (px)

Citation preview

SOUTHERN CROSS SXVSVERTICAL SHAFT DRIVEN CENTRIFUGAL SLURRY PUMPS

HEAVY DUTY, RELIABLE SLURRY PUMPING FROM SUMPS AND PITS

FEATURES

APPLICATIONS

Transfer of Abraisive and High Density Slurries from Sumps and Pits in:MiningIndustryCivil ConstructionCoal PreperationMineral ProcessingChemical ProcessingSugar Industry

OPERATING LIMITS

Capacity 10-1000m3/hourHead up to 40 metresDischarge 40-250mmMax. Solid Size 50mmMotor Sizes 3-200kWOperating Speed 400-2200RPMPumped Liquid Abraisive Slurries

High Density Slurries Solids Laden Water

SXVS-IF-0113

Cantilevered design eliminates shaft sealing requirements.

Column and discharge pipe options available including composite materials.

Cantilever shaft length up to 2400mm.

Deep sump variant available for applications where cantiler design is not suitable.

Quick and easy changeover of wet end.

Drive end bearings have no contact with pumped product, allowing greater wear life.

Wet end stub shaft options available for severe duty applications.

Wide range of wet end construction material options available to suit any application and installation environment.

Removeable upper strainer.

Rubber lined cast iron lower strainer reduces blockages.

OPTIONS

Stub shaft options for severe duty applications.Cantilevered shaft or extension shaft with column bearings.Direct coupled or belt drive with set speed or variable frequency operation.Wet end, column and discharge pipe materials of construction.

Page 2: SOUTHERN CROSS SXVS VERTICAL SHAFT DRIVEN CENTRIFUGAL ... · SOUTHERN CROSS SXVS VERTICAL SHAFT DRIVEN CENTRIFUGAL SLURRY PUMPS ... Deep sump variant available for ... Pump Casing

PENTAIR SOUTHERN CROSS8618 Warrego Highway, Withcott, QLD 4352, Australia. www.southerncross.pentair.com

All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names are trademarks or registered marks of their respective owners.Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.Pentair is an equal opportunity employer.A.B.N. 83 000 922 690 © 2012 Pentair, Ltd. All Rights Reserved.

PERFORMANCE

MATERIALS OF CONSTRUCTION

00 20 40 60 80 100 200 300 400

Flow Rate (litres/sec)

Tota

l Hea

d (m

)

Flow Rate (m3/h)0 200 400 600 800 1000 1200 1400

40P 65Q 100R 150S 250S200S

Description Standard Material Material Options

Shaft 4140 Mild Steel Available on Request1

Bearing Housing Cast Iron

Column Mild Steel

Upper Strainer Cast Iron Rubber

Lower Strainer Cast Iron

Back Liner 27% Chrome White Iron

Pump Casing 27% Chrome White Iron Rubber Lined White Iron

Impeller 27% Chrome White Iron Rubber

Discharge Pipe Mild Steel Rubber Lined Mild Steel / Composite

Adaptor Plate Mild Steel1. Vertical shaft material options are available to suit a wide range of applications and installations. Contact Pentair Southern Cross to discuss the availability of material options.

Cantilever Shaft Extension Shaft