Sony Ebook Reader PRS-505

5/24/2018 Sony Ebook Reader PRS-505

1/74

SERVICE MANUAL

Published by Sony Techno Create Corporation

Sony CorporationAudio Business Group

PRS-505

SPECIFICATIONS

PORTABLE READER SYSTEM

9-887-835-02

2007L05-1

2007.12

US Model

Canadian Model

Ver. 1.1 2007.12

SONY and the SONY logo are registered trademarks of Sony Corporation.

BBeB, BBeB Book, and their logos are trademarks of Sony Corporation.

Memory Stick, Memory Stick Duo, Memory Stick PRO Duo, and their logos are trademarks of Sony Corporation.

Bitstream is a registered trademark, and Dutch, Font Fusion, and Swiss are trademarks, of Bitstream Inc.

Microsoft, Windows, Windows Vista and Windows Media are trademarks or registered trademarks of Microsoft Corporation

in the United States and / or other countries.

Adobe, Adobe Reader and Adobe PDF are trademarks or registered trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.Continued 90 US

This product uses MontaVista Software, Inc.s MontaVista(R) Linux(R) Professional Edition as the operating system.

COPYRIGHT 1999-2006 MONTAVISTA SOFTWARE, INC. ALL RIGHTS RESERVED.

http://www.mvista.com/

MontaVista is a registered trademark of MontaVista Software, Inc.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. () Copyright 1998-2006 The OpenSSL Project. All rights reserved. This product includes cryptographic software

written by Eric Young ([email protected]). This product includes software written by Tim Hudson ([email protected]).

For details on OpenSSL License, refer to openssl.txt on the CD-ROM.

All other system names and product names appearing in this document are generally the registered trademarks or trademarks

of their respective manufacturers. Further, the trademark TM and registered trademark symbols are not indicated throughout

this document.

Program 2006, 2007 Sony Corporation

Documentation 2006, 2007 Sony Corporation

Power source

Built-in rechargeable battery: DC 3.7 V

AC power adapter: DC 5.2 V

Battery life (continuous playback)

Approx. 7500 pages (when the battery is fully charged)

User available capacity

Approx. 192MB

Available storage capacity of the Reader may vary.

Operating temperature

5 to 35 C (41 to 95 F)

Dimensions (w/h/d)

Approx. 6.9 4.8 0.3 inches (maximum, without soft cover)

Mass

Approx. 9 oz (without soft cover)

Package Contents

The Reader comes installed with a built-in rechargeable

battery.

Reader (with Soft cover) (1)

USB cable (1)

CD-ROM (1)

- eBook Library software

- Users Guide (PDF)

- Sample contents

Quick Start Guide (this manual) (1) Flyers

Dummy cards (2)

Note

This CD-ROM will not play in an audio CD player.

Design and specifications are subject to change without notice.


2/74

PRS-505

2

1. SERVICING NOTES ............................................. 3

2. GENERAL.................................................................. 5

3. DISASSEMBLY3-1. Disassembly Flow .......................................................... 63-2. Ornamental Plate (Upper) Assy, Plate (Case_Upper) .... 6

3-3. Ornamental Plate (Lower) Assy ...................................... 7

3-4. Main Assy ...................................................................... 7

3-5. (Ion) Storage Battery Assy ............................................. 8

3-6. SLOT FLEXIBLE Board ............................................... 8

3-7. CONNECT FLEXIBLE Board ...................................... 9

3-8. Frame ............................................................................. 9

3-9. MAIN Board, Ink (Indication) Element Assy (IIE1) ...... 10

4. TEST MODE ............................................................ 11

5. ELECTRICAL ADJUSTMENT........................... 11

6. DIAGRAMS6-1. Block Diagram - MAIN Section (1/2) - .......................... 12

6-2. Block Diagram - MAIN Section (2/2) - .......................... 13

6-3. Block Diagram - KEY/POWER SUPPLY Section - ....... 14

6-4. Printed Wiring Board

- MAIN Board (Component Side) - ................................ 16


- MAIN Board (Conductor Side) - .................................. 17

6-6. Schematic Diagram - MAIN Board (1/10) - ................... 18




6-10. Schematic Diagram - MAIN Board (5/10) - ................... 226-11. Schematic Diagram - MAIN Board (6/10) - ................... 23




6-15. Schematic Diagram - MAIN Board (10/10) - ................. 27


- CONNECT FLEXIBLE Board - .................................. 28

6-17. Schematic Diagram

- CONNECT FLEXIBLE Board - .................................. 28

7. EXPLODED VIEWS7-1. Case Section ................................................................... 44

7-2. Main Section .................................................................. 45

8. ELECTRICAL PARTS LIST .............................. 46

TABLE OF CONTENTS Notes on chip component replacement Never reuse a disconnected chip component.

Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

Flexible Circuit Board Repairing Keep the temperature of soldering iron around 270 C during

repairing.

Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

Be careful not to apply force on the conductor when soldering

or unsoldering.

SAFETY-RELATED COMPONET WARNING!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINEWITH MARK 0ON THE SCHEMATIC DIAGRAMS AND INTHE PARTS LIST ARE CRITICAL TO SAFE OPERATION.REPLACE THESE COMPONENTS WITH SONY PARTSWHOSE PART NUMBERS APPEAR AS SHOWN IN THISMANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT!

LES COMPOSANTS IDENTIFIS PAR UNE MARQUE 0SURLES DIAGRAMMES SCHMATIQUES ET LA LISTE DESPICES SONT CRITIQUES POUR LA SCURIT DE FONC-TIONNEMENT. NE REMPLACER CES COM- POSANTS QUEPAR DES PICES SONY DONT LES NUMROS SONT DON-NS DANS CE MANUEL OU DANS LES SUPPLMENTSPUBLIS PAR SONY.

CAUTIONDanger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type.


3/74


4/74

PRS-505

4

Removing the soft cover

Pull the tab of soft cover towards. Remove Sonys Reader in the direction of.

Attaching the soft cover

Insert the tabof the soft cover in the hole of SonysReader.

Pull the tab of the soft cover towards. Insert Sonys Reader in the direction ofto attach it to the soft

cover.

Check that the tabs of the soft cover are completely inserted inthe holes of Sonys Reader.

Note: Note that the tab of the soft cover may become deformed,

if you strongly pull the tab too much.

NOTE THE IC1001 ON THE MAIN BOARD

REPLACING

Replacement of IC1001 on the MAIN board used in this set re-

quires a special tool

NOTE THE IC301, IC953, IC1106, IC1201, IC1202 AND

IC1203 ON THE MAIN BOARD REPLACING

When IC301, IC953, IC1106, IC1201, IC1202 and IC1203 on the

MAIN board is damaged, exchange the new MAIN board for the

MAIN board which IC damaged

NOTES WHEN REPLACING THE INK INDICATOR

ELEMENT ASSY, MAIN BOARD AND FLASH ROM

(IC1203)

When the INK INDICATOR ELEMENT ASSY, MAIN board, or

FLASH ROM (IC1203) is replaced, you need to change the LUT.

REMOVING/ATTACHING THE SOFT COVER


5/74

PRS-505

5

SECTION 2

GENERAL

This section is extracted

from instruction manual.

Guide to Parts and Controls

Front

Enter button*1

To decide an item or apply asetting, press the Enter button.

/// buttons*1

To select an item or scroll around the screen, press (left), (up), (down), or (right).

*1 In this manual, the operation of the ////Enterbuttons areexplained as follows.

(Example) Press/// to select Away on the Book list, thenpress Enter.

Enterbutton

MENU button

To return to the previous screen or show a menu. (page) / (>/)/previous (


6/74

PRS-505

6

SECTION 3

DISASSEMBLY

This set can be disassembled in the order shown below.

3-1. DISASSEMBLY FLOW

Note 1: The process described in can be performed in any order.

Note 2: Without completing the process described in , the next process can not be performed.

Note 3: Please refer to SERVICING NOTES REMOVING/ATTACHING THE SOFT COVER (page 4).

3-6. SLOT FLEXIBLE

BOARD

(Page 8)

3-7. CONNECT FLEXIBLE

BOARD

(Page 9)

3-5. (ION) STORAGE

BATTERY ASSY

(Page 8)

3-4. MAIN ASSY

(Page 7)

3-8. FRAME

(Page 9)

SET

3-2. ORNAMENTAL PLATE (UPPER) ASSY,

PLATE (CASE-UPPER)

(Page 6)

3-3. ORNAMENTAL PLATE

(LOWER) ASSY

(Page 7)

3-9. MAIN BOARD, INK (INDICATION) ELEMENT ASSY (IIE1)

(Page 10)

Note: Follow the disassembly procedure in the numerical order shown below.

3-2. ORNAMENTAL PLATE (UPPER) ASSY, PLATE (CASE_UPPER)

two screws (M1.4)

claw

adhesive sheet (C)

adhesive sheet (C)

plate (case_upper)

plate (case_upper)

adhesive sheet (B)

adhesive sheet (B)

The upper part of the back side

Remove while moving ornamental plate (upper) assyin the direction of the arrow.

Note: When peeling off adhesive sheet,

be sure to exchange it for new adhesive sheet.


7/74

PRS-505

7

3-3. ORNAMENTAL PLATE (LOWER) ASSY

3-4. MAIN ASSY

claw

ornamental plate (lower) assy

two claws

screw (M1.4)

two screws (M1.4)

The lower part of the back side

Please draw out main assy to the halfnoting that KEY FLEXIBLE board does not stretch

in the direction of the arrow.

three tapping screws

Please open the lower side of case assya little up and down.

Please draw out main assyfrom case assy in the direction

of the arrow completely

after removing the connector (CN801).

Please insert paper and the film, etc.in the space of case assy not to be damaged

of the display side of INK(indikation) element assy.

connector (CN801)

spacer (CON_key)

KEY FLEXIBLE board

case assy

back side


8/74

PRS-505

8

3-5. (ION) STORAGE BATTERY ASSY

3-6. SLOT FLEXIBLE BOARD

two screws (M1.4)

(ion) storage battery assy

connector (CN401)

main assy

back side

upper side

lower side

two screws (M1.4)

SLOT FLEXIBLE board

spacer (CON_SD)

connector (CN201)

main assy

back side

lower side

upper side


9/74

PRS-505

9

3-7. CONNECT FLEXIBLE BOARD

3-8. FRAME

two screws (M1.4)

CONNECT FLEXIBLE board

spacer (CON_USB)

adhesive sheet (D)Note: When peeling off adhesive sheet,


connector (CN901)

main assy

back sidelower side

upper side

shaft (spring)Note: Note the loss

because it is likely to dash out

when it removes.

compression spring

Note: Note the lossbecause it is likely to dash out

when it removes.

adhesive sheet (A)Note: When peeling off adhesive sheet,


two adhesive sheets (B)Note: When peeling off adhesive sheet,


frame

nut plateNote: Note the loss.

screw (M1.4)


10/74

PRS-505

10

3-9. MAIN BOARD, INK (INDICATION) ELEMENT ASSY (IIE1)

screw (M1.4 2)MAIN board

connector (CN302)

ink (indication) element assy (IIE1)


11/74


12/74


13/74


14/74


15/74


16/74


17/74

PRS-5051717

TP301TP302

TP303

TP110

TP304

TP305

T

TP306

TP113

TP307

TP308

TP309

TP1201

TP1202

TP310

TP311

TP1016

TP312

TP1017

TP313

TP1018

TP314

TP1019

TP315

TP316

TP317

TP318

TP319

TP1022

TP1023

TP1024

TP320

TP1025

TP321

TP322

TP1027

TP323

TP1028

TP324

TP1029

TP325

TP326

TP327

TP328TP329

TP330

TP331

TP332 TP333

TP334

TP335

TP336

TP337

TP338

TP339

TP1813

TP340

TP1814

TP341 TP1815

TP342

TP1816

TP343 TP344

TP345

TP346

TP347

TP348

TP349TP350

TP351TP352

TP353

TP2001

TP2002

TP2003

TP2004

TP2005

TP2006

TP2007

TP2008

TP2009

TP2010

TP2011

TP951

TP952

TP953

TP954

TP955

TP956

TP957

TP958

TP959

TP960

TP201

TP202

TP203

TP204TP205

TP206

TP207TP208

TP209

TP1101

TP1102

TP401

TP402

TP403

TP210

TP404

TP211

TP405

TP212

TP406

TP213TP214

TP408

TP215

TP409

TP216

TP217TP218

TP219

TP410

TP411

TP412

TP413

TP220TP221

TP415

TP222

TP223

TP224

TP225

TP801

TP226

TP1506

TP227

TP1507

TP1508

TP1509

TP805

TP806TP807

TP808

TP809

TP1510

TP1511

TP1512

TP1513

TP810TP1515

TP811

TP1516

TP812

TP1517

TP813

TP1518

TP814

TP1519

TP815

TP816

TP817

TP1520

TP1521

TP1522TP1523

TP828

TP831

TP832

TP833

TP1540

TP1541

TP1542

TP1543

TP1544

TP1545

TP1546

TP1547

TP1548

TP1549

TP1550

TP1551

TP1552

TP1553

TP1554

TP1555

TP1556

TP1557

TP1558

TP1559

TP1560

TP1561

TP1562

TP1563

TP1564

TP860

TP1565

TP1566

TP1567

TP1568

TP1569

TP1570

TP1571

TP1572

TP1573

TP1574

TP1575

TP1576

TP1577

TP1578

TP1579

TP1580

TP1581

TP1582

TP1583

TP1584

TP1585

TP1586

TP1587TP1588

TP1589TP1590

TP1591

MAIN BOARD (CONDUCTOR SIDE)

1-875-228- 11

A

B

C

D

E

F

G

H

I

1 2 3 4 5 6 7 8 9 10 11

6-5. PRINTED WIRING BOARD - MAIN Board (Condu ctor Side) - : Uses unleaded solder.


18/74

PRS-505

PRS-505

1818

6-6. SCHEMATIC DIAGRAM - MAIN Boar d (1/10) - See page 29 for IC Block Diagram. See page 34 for IC Pin Function Descripti on.

TP201

TP218

IC20

IC202

IC203

IC206C207

C225

C226R223

C210C208

L203

C214 C215

L201

C202 C206

RB202C211

C213

C212

R210

R219

RB201

TP212

TP213

TP221

C216 R255 C217 R224

C218

IC205

C219

IC201

TP202

TP203

TP204

TP205

TP206

TP207

TP208

C205

L204

R203 R204

RB203

TP220TP217

TP216

TP215

TP214

L206

C201

C209

C204

R205

C203

L207

XC6213B

TC7SH08FU

TC74LCX138FK

TC7SZ125FU0.1

0.001

0.1100

0.10.1

10 0.1

10 0.1

1000.1

0.1

0.1

100

100k

100

1 470k 1 470k

1

XC6213B312NR

1

R5C807

0.1

0 0

100

0

0.1

10

0.1

0

0.1

BD(31-0)

BA(24-0)

MSDET

GND

V2

BHRESET

SDINT

CS3

V3

VCORE

SRR5C

PCR5C

CLKO

V3

BHRESET

BOE

BEB2

BHRESET

VCORE

V2

UNREG

V2

BOE

BA1

BA2

BA3

BA4

BA5

BA6

BA7

BA8

BA9

BA10

BA11

BA12

BA13

BA14

BA15

BD0

BD1

BD2

BD3

BD4

BD5

BD6

BD7

BD8

BD9

BD10

BD11

BD12

BD13

BD14

BD15

SDINT

SDINT

BEB2

BEB2

BOE

DAT0

DAT1

DAT2

DAT3

CMD

CLK

BA21

BA22

BA23

CS3

CS3

DAT3

DAT0

DAT1

DAT2

CMD

CLK

MSDAT3

MSCLK

MSBS

MSBS

MSDAT1

MSDAT0

MSDAT2

MSDAT3

MSCLK

MSDAT2

MSDAT0

MSDAT1

GND

VCC

VCC

EN

GPIO

LED

HW

SPND

RWM

ODE

WAM

ODE

LTLEN

TE

ST

CKIN

GND

RS

TV

CC_

ROU

T

VCC_

RIN

RE

GEN

INT

WAIT

/DTA

CK

WR

RD

EB1

EB

0V

CC_HOS

T

CS

D1

5D14

D13

D12

D11

D10

D9

D8

D7

D6

D5

GND

D4

D3

D2

D1

D0

BS

A22

VCC_ROUT

A21

A19

A20

A18

A17

VCC_HOST

A16

A15

A14

A13

A12

A11

A10

A9

A8

A7

A6

A5

A4

A3

A2

A1

A0

GND

MDIO11

MDIO12

VCC_3V

MDIO14

MDIO15

MDIO21

MDIO22

MDIO19

MDIO20

MDIO23

MDIO24

VCC_ROUT

MDIO17

GND

MDIO09

VCC_3V

MDIO27

MDIO29

A

B

C

G2A

G2B

G1

Y7

GND

VCC

Y0

Y1

Y2

Y3

Y4

Y5

Y6

(1/10)

VCC

GND

ADDRESS

DECODER

SWITCHINGBUFFER

REGULATOR

+3.1V

+3.1V

REGUL

MEMORYSTICKDUO/

SDMEMORYCARD

CONTROLLER

MSCD

SDCMD

SDDAT2

MSBS

SDDAT1

SDDAT0

SDCLK

MSCLK

SDWP

MSDAT3

MS

DAT2

XD

CE

MS

DAT1

MS

DAT

0

SDDAT

3

SD

CD

10H

10H

10H

100H

(Page 23)

(Page 19)

(Page 22)

(Page 26)

(Page 22)

(Page 21)

(Page 27)

(Page 22)

(Page 19)


19/74

PRS-5051919

IC101

IC108

C129

C128

TP112

TP109

C112 R107

C113 R108

C111

C110

C109

R106

IC107

R110

R102Q105

R103

R104

R101

C103

C104

L102

Q104

C108

R109

C122

C121 C120

C118

C117 C116

L103

C114 C115

C123

C124

C107

R117

R116

C141

TP1590

X102

R120

R122

R129

C119

D102

D101

TP110

AK4365VN-L

TC7SH08FU

2204V

2204V

HP-R

HPGND

0.1 10

0.1 10

10

0.1

0.0047

10k

TC7SHU04FU

470

1M2SC4738F-Y/GR

4.7k

4.7k

100k

0.001

0.1

2SA1832F-GR

0.01

10

0.1

0.1 0.1

10

10 1

0.1 10

10

0.1

0.01

100

330

0.01

11.2896MHz

10

UDZSNPTE-175.6B

UDZPTE-175.6B

HP-L

STFS

STCK

STXD

SRDSP

AUDIO1

AUDIO2

AUDIO3

PCAUDIO

HP-L

HP-GND

HP-R

BHRESET

GND

V2

GND

VCC

(2/10)

VCC

GND

NC

SWITCHING

B+SWITCH

Q104,105

CLOCKBUFFER

AUDIOD/A

CONVERTER

100H

22H

(Page 18)

6-7. SCHEMATIC DIAGRAM - MAIN Board (2/10) - See page 15 for wavefo rm. See page 29 for IC Block Diagram.

(Page 18)

(Pag

(

(P


20/74

PRS-505

PRS-505

2020

TP1815

TP1814

TP1816

TP1813

D1801

Q1804

R1816

IC1802

IC1805

D1802

D1804

D1805

Q1822

Q1809

R1843

R1802

R1884

C1816

R1907

C1808

L1811 C1804

R1824

R1823

C1806

R1835 R1836

R1883

C1801

R1837

D1803

C1843

R1894

R1895

R1893 C1845 C1818C1834

R1881 R1880

R1882

R1898 R1807

D1810

R1908

C1809C1835

C1805

R1910

R1899

R1876

C1879R1827

R1828

R1826 C1842 R1891

R1890

C1855

R1892 C1810

C1814 R1888

R1889

R1887

R1886

Q1805

R1885C184

IC1806C181

C1866

TP354

R1840

C1884

C1822

IC1803

D1807

R1829R1863

R1821

C1812

R1860

R1861

R1832

C1821

R1842

R1841

RV1801

R1849 R1848 R1815

Q

IC1807

C1885

L1812

L1803

D1813

C1823

R1864

R1814

D1808

D1809

Q1806

L1804BAT760-115

SSM6J07FU

100k

LT3467ES6#TR

LT1931ES5#TR

1SS362-TE85L

BAT760-115

1SS362-TE85L

2SJ305(TE85L)

2SA1832F-GR

10k

0

10k

0.47

100k

1016V

10

82k

24k

10

15k 27k

10k

0.0022

240

BAT760-115

0.1

24k

27k

100k 0.1 11

100k

10k

10k

1k 10k

1SS388(TPL3)

100k

10

16V 0.47

10

0

100

10k

0.0191k

30k

11k 0.1 33k

22k

0.1

100k 1

1 100k

10k

56k

56k

2SC4738F-Y/GR

100k0.1

TC7W53FK

0.1

100

6.3V

3.3k

0.1

0.1

NJM2904V(TE2)

1SS362-TE85L

1k10k

100k

0.22

100k

100k

1k

0.1

47k

4.7k

10k

1k 100k 680k

HN1B04

NJM2904V(TE2)

0.1

1SS362-TE85

0.1

680k

1k

1SS387-TPL3

1SS387-TPL3

2SC4738F-Y/GR

8PWR_NEG

8PWR_POS

UNREG

GND

UNREG

GND

VCC

CH0

CH1

AGND

VEE

INH

COM

-

V-

V+

SW

GND

NFB

SHDN

VIN

SW

SS GND

FBSHDN

VIN

V-

V+

(3/10)

1

654

3 2

DC/DC

CONVERTER

SWITCHING

REGULATOR

CURRENT

DETECT

COMPARATOR,VCOMAMP

VCOMSWITCH

B+SWITCH

Q1805,1822

S

REGULATOR

REGULATOR

B+SWITCH

10H

10H

BS

+

+

+

+

(Page 21)

6-8. SCHEMATIC DIAGRAM - MAIN Boar d (3/10) - See page 29 for IC Block Diagram.

(Page 27)

(Page 21)

(Page 24)


21/74

PRS-5052121

TP312

TP313

TP314

TP315

TP316

TP319

TP318

IC301

TP301

TP350

TP349

C317

R330

R333

R337 C318 C320

TP302

TP303

TP304

TP305

TP306

TP307

TP308

TP309

TP310

TP311

C325

C323

C324

R389

C305

R364

C306

R388

C322R387R355

R322

C302

C301

TP347

TP348

R302

C303

R303

C304

L301

R326

R334

R328

C316

C315

R301

C321

R349

RB303

RB301

IC303

R327

R365

C319

RB302

TP353

TP352

TP351

RB304

C326

TP317

IC302

A3P125-VQG100

0.1

0

330

330

0.1 0.1

0.1

0.1

0.1

1k

0.1

1k

0.1

1k

0.11k0

470k

1

1

470k

1

0

1

0100

0

0.1

0.1

0

0.1

100

100

100

XC6215B312NR

0

0

0.1

100

100

10

XC6215B152NR

GND

VCORE

UNREG

PCA3PIO

PCA3PCORE

LCDBUS

VCORE

PD0

PD1

PD2

PD3

PD4

PD5

PD6

PD7

PD8

PD9

PD10

PD11

PD12

PD13

PD14

PD15

FCLK

LCLK

PCLK

ERR

STBY

RDY

PDOE

SDLE

SD0

SD1

SD2

SD3

SD4

SD5

SD6

SD7

SDCLK

SDOE

GDOE

GDSP

GDCLK

SDCE0

SDCE1

SDCE2

8COM_CTRL

8BORDER0

8BORDER1

8PWR_POS

8PWR_NEG

8PWR_GATE

SRA3P

GND

PD15

GND

GND

GND

GND

GND

GND

VCC

TCK

TDI

TMS

VPUMP

NC

TDO

TRST

VJTAG

VCC

GND

VCC

PD14

PD13

PD12

PD11

PD10

PD9

PD8

PD7

PD6

PD5

PD4

PD3

PD2

PD1

PD0

PSFL

VCC

FCLK

LCLK

PCLK

SDLE

SDDO0

SDDO1

SDDO2

SDDO3

SDDO4

SDDO5

SDDO6

SDDO7

SDCLK

SDOE

GDOE

GDSP

GDCLK

SDCE0

SDCE1

SDCE2

SDCE3

SDCE4

SDCE5

SDSHR

GDRL

PWRCOM

PWR2

BDR1

BDR0

PWR0

PWR1

SPIDO

SPICLK

SPIDI

SPICS

I2CSCL

I2CSDA

PWR3

RESERVED

TEST2

TEST0

TEST1

RESERVED

RESERVED

RESERVED

PDOE

RESET

RDY

STBY

ERR

RESERVED

VCCI

VMV

VCCI

VMV

VCCI

VMV

VCCIB

(4/10)

INDICATORCONTROLLER

REGULATOR

+3.1V

+1.5VREGULATOR

GND

VMV

GND

GND

GND

10H

6-9. SCHEMATIC DIAGRAM - MAIN Board (4/10) - See page 29 for IC Block Diagram. See page 34 for IC Pin Function Descript ion.

(Page 27)

(Page 23)

(Page 18)

(Page 20)

(Page 23)


22/74


23/74

PRS-5052323

TP1016

TP1017

TP1018

TP2006

TP2008

TP2007

TP1022

TP1024

TP1025

TP2011

R2102

Q1001

TP1023

R2010

C1029

RB2015 C1030

RB2014

R2527

R2216

L1002

L1003

C1005

C1006

C1003

C1004 TP1019

C1007

C1008 C1009 C1010 C1011 C1012

RB2010

C1013

C1014

C1015

C1016 R2268 C1017 C10

R2119

R2215C1019

R2208

C1022

C1021

C1020

R2267

R2239

R2219

R2238

TP2001

TP2002

TP2003

TP2004

R2

R2101

R2021

C1023

R2013

R2019

RB2016

C1024

R2020

TP2010

RB2005

RB2003

RB2004

RB2002

RB2001

RB2006

TP113

C1

R2214

RB2007

TP1029

TP1028

RB2013

RB2012

RB2011

C102

TP1585

TP1540

TP1515

TP2005

C10

TP1027

TP1588

TP1589

TP1541

TP1586

C1028

IC1002

IC1001

R2104 R2103

X1002

V2

V2

VCORE

BOOT1

BOOT2

BOOT0

PA18

SDCKE1

RESET-SF

16M

1k

2SC4738F-Y/GR

PA20

680

0.1

470k 0.1

470k

330

10k

1006.3V

0.1

476.3V

0.1 GND

0.1

0.1 0.1 0.1 0.1 0.1

470k

0.1

0.1

0.1

0.1 100k 0.1 1

10k

10k0.1

100k

6p

6p

0.1

100k

10k

10k

10k

TDI

TCK

TMS

TDO

10

1k

330

0.1

100

330

470k

0.1

330

PA14

100

100

100 100

100

330

PA14

0

10k

100

A0

A24

330

330

330

0.1

TRST

0.0

PB20

0.1

TMP75AIDR

MC9328MXLVP20R2

100 100

32.768KHz

LCDBUS

LED2-ORG

GND

RY/#BY

VCORE

V2

SRDSP

STCK

STFS

STXD

VBUS

SDWP

SDDET

PCR5CCLK

PCSDCARD

PCMSCARD

USB20INT

GND

D(31-0)

A(24-0)

NAND-ALE

NAND-CLE

NAND-CEO

A1

A2

A3

A4

A5

A6

A7

A8

A9

A10

A11

A12

A13

A14

A15

A16

A17

A18

A19

A20

A21

A22

A23

D0

D1

D2

D3

D4

D5

D6

D7

D8

D9

D10

D11

D12

D13

D14

D15

D16

D17

D18

D19

D20

D21

D22

D23

D24

D25

D26

D27

D28

D29

D30

D31

RTS

PCAUDIO

AUDIO1

AUDIO2

AUDIO3

USBCRG

USBBOOT

PCLK

ERR

RDY

STBY

SRA3P

PDOE

LCLK

FCLK P

D0

PD1

PD2

PD3

PD4

PD5

PD6

PD7

PD8

PD9

PD10

PD11

PD12

PD13

PD14

PD15

CTS

TXD

RXD

SDA

SCL

OS

GND

VCC

A0

A1

A2

(6/10)

TEMPERATURE

SENSOR

MAINCPU

LEDSWITCH

10H

10H

CSP(ChipSize Package)

6-11. SCHEMATIC DIAGRAM - MAIN Board (6/10) - See page 15 for waveform. See page 29 for IC Block Diagram. See page 34 for IC Pin Function Descripti on.

(Page 21)

(Page 22)

(Page 22)

(Page19)

(Page 22)

(Page 18)

(Page 22)

(Page 24)

(Page 25)

(Page 27)


24/74


25/74

PRS-5052525

TP1201L1201

C1219 C1218

C1205

C1208

C1209

C1214

C1217

C1213

C1211

C1204

C1202

C1203

C1200

TP1506

TP1507

TP1508

TP1509

TP1510

TP1511

TP1512

TP1513

IC1201

IC1202

GND

100.1

0.001

0.1

0.001

0.1

0.001

0.1

0.1

0.1

0.1

0.1

0.1

K4M561633G

-BN75T

K4M561633G

-BN75T

GND

MA11

MA10

#CAS

#RAS

SDCLK

SDCKEO

#CS2

#SDWE

DQM0

DQM1

DQM2

DQM3

V2

V2

A(24-0)

D(31-0)

V2

GND

A(24-0)

D(31-0)

D24

D25

D26

D27

D28

D29

D30

D31

A2

A3

A4

A5 A6

A7

A8

A9

A10

D0

D1

D2

D3

D4

D5

D6

D7 D8

D9

D10

D11

D12

D13

D14

D15

A6

A7

A8

A9

A12

A13

A12

A13

A2

A3

A4

A5

A14

A15

A14

A15

A10

D19

D20

D22

D23

D21

D18

D17

D16

(8/10)

SD-RAM

SD-RAM

22H

CSP

(ChipSizePackage)

CSP

(ChipSizePackage)

(Page 23)

6-13. SCHEMATIC DIAGRAM - MAIN Board (8/10) -

Note: When IC1201 and IC1202 on the MAIN boadamaged, exchange the new MAIN board fo

MAIN board which IC damaged.

(Page 27)

(Page 23)

(Page 26)


26/74

PRS-505

PRS-505

2626

IC1112

IC1113

IC1116

IC1117

R1103

IC1101

IC1102

IC1107

C1104

C1109

C1110

C1112C1101

C1115

C1114

C1103

L1101

C1108

TP1554

TP1546

TP1547

TP1548

TP1549

TP1550

TP1551

TP1552

TP1553

TP1555

TP1556

TP1557

TP1558

TP1559

TP1560

TP1561

TP1564

TP1566

TP1568

TP1570

TP1572

TP1576

TP1578

TP1580

TP1582

TP1584

TP1542

TP1543

TP1574

SN74LVC244APWR

SN74LVC244APWR

TC7SZ125FU

TC7SZ125FU

0

TC7MP245FK(EL)

TC7MP245FK(EL)

TC7MP01FK

0.1

0.1

0.1

0.110

0.01

0.01

0.1

0.1

R/#W

#OE

EB2

#CS0

CS1

CS3

CS4

CS5

HRESET

BHRESET

#CS0

BR/W

CS1

HRESET

CS4

CS3

A(24-0)

D(31-0)

V2

GND

D0

D1

D2

D3

D4

D5

D6

D7

D8

D9

D10

D11

D12

D13

D14

D15

BD0

BD1

BD2

BD3

BD4

BD5

BD6

BD7

BD8

BD9

BD10

BD11

BD12

BD13

BD14

BD15

A2

A4

A6

A8

A10

A12

A14

A16

A18

A20

A22

BA3

BA5

BA7

BA9

BA11

BA13

BA15

BA17

BA19

BA21

BA23

EB2

R/W

OE

EB2

R/W

OE

R/W

A1

DIR

A1

A2

A3

A4

A5

A6

A7

A8

GND

VCC

OE

B1

B2

B3

B4

B5

B6

B7

B8

DIR

A1

A2

A3

A4

A5

A6

A7

A8

GND

VCC

OE

B1

B2

B3

B4

B5

B6

B7

B8

1OE

1A1

2Y4

1A2

2Y3

1A3

2Y2

1A4

2Y1

GND

VCC

2OE

1Y1

2A4

1Y2

2A3

1Y3

2A2

1Y4

2A1

1OE

1A1

2Y4

1A2

2Y3

1A3

2Y2

1A4

2Y1

GND

VCC

2OE

1Y1

2A4

1Y2

2A3

1Y3

2A2

1Y4

2A1

GND

VCC

GND

VCC

(9/10)

BUFFER

BUFFER

BUFFER

B

BUFFER

ANDGATE, INVERTER

VCC

GND

BUFFER

22H

6-14. SCHEMATIC DIAGRAM - MAIN Board (9/10) - See page 29 for IC Block Diagram.

(Page 25)

(Page 22)

(Page 23)

(Page 22)

(Page 22)

(Page 18)


27/74

PRS-5052727

TP413

R408

R411

R416

IC402

TP415

TP405

TP401

TP400

TP403

R431

R425

IC403

Q402

IC405

IC408

Q406

R426

R424

C425

R402

R403

C402 C406 R421

IC409

R422

C424

C429

R415

C419

C420

IC406

C422

C416

C413

C405

C403

R404

R405

R407R406

R417

TP402 D420

TP404C401

D401

D403

R423

C404

C408

R427

R428 R429

R430

Q405

C407

C411

CN401

C426

C421

TP408

L402

L403

PS401

TP411

IC407

R409

THP401

D402

Q401

IC401

470k

0

470k

XC9226A296MR

V3

BATT

GND

GND

DC

470k

10k

XC9226A196MR

RTQ035P02TR

XC61CN3002NR

XC61CC3202NR

HN1B04FE-Y/GR

10k

470k

0.1

100k

100k

10 10 2.2k

XC6213B312NR

0

0.1

1

47k

1

1

XC6215B292NR

0.1

10

4.7

0.0015

10

47k

36k

10k6.8k

470k

DC CRS01(TE85R)

BATT10

DAN222-TL

DAN222-TL

100k

0.1

10

220

100k 2 .2M

100k

2SC4738F-Y/GR

4.7

10

2P

0.1

0.1

DCDET

2A32V

V1

TC7WH74F

0

UDZSNPTE-175.6B

2SC4738F-Y/GR

SN412005RHLR(BQ24032)

STAT1

USB_VBUS

DC+

DC-

GND

123

4 5 6

(10/10)

LITHIUMION

BATTERY

3.7V600mAh

CHARGE

CONTROL

B+SWITCH

+2.9VREGULATOR

+1.9VREGULATOR

+2.9VREGULATOR

VOLTAGEDETECTOR VOLTAGEDETECTOR

+3.1VREGULATOR

INVERTER

RESET

Q402,405,406

6.8H

6.8H

6-15. SCHEMATIC DIAGRAM - MAIN Board (10/10) - See page 29 for IC Block Diagr am. See page 34 for IC Pin Function Descr iptio n.

(Page 24)

(Page 22)


28/74

PRS-505

PRS-505

2828

R003 R001

R002

A

MAINBOARDCN901

J002

J001

CN006(USB)

CONNECT FLEXIBLE BOARD

5

1

1-875-230- 11

18

1

A

B

C

D

E

F

G

H

1 2 3 4 5

DCIN5.2V

+

TP802

R001 R0

R00

USB-CASE

0

0

(Page 16)

6-17. SCHEMATIC DIAGRAM - CONNECT FLEXIB6-16. PRINTED WIRING BOARD - CONNECT FLEXIBLE Boar d -

: Uses unleaded solder.

Note: When CONNECT FLEXIBLE board is defective,exchange the entire mounted board.


29/74


30/74


31/74


32/74


33/74


34/74

PRS-505

34

MAIN BOARD IC201 R5C807 (MEMORY STICK DUO/SD MEMORY CARD CONTROLLER)

Pin No. Pin Name I/O Description

1 VCCEN O +3.3V power supply control signal output terminal Not used

2 GPIO I/O Not used

3 LED O Not used

4 HWSPND I Hardware suspend mode select signal input from the main CPU"L": hardware suspend mode

5 RWMODE IRead-write timing mode select signal input terminal

"H": maximum cycle time Fixed at "H" in this set

6 WAMODE IWAIT/DTACK mode select signal input terminal

"L": DTACK mode, "H": WAIT mode Fixed at "L" in this set

7 LTLEN ILittle/big endian select signal input terminal

"L": little endian mode, "H": big endian mode Fixed at "L" in this set

8 TEST I Test mode terminal Normally fixed at "L"

9 CKIN I Host colck signal input from the main CPU

10 GND - Ground terminal

11 RST I Reset signal input terminal "L": reset

12 VCC_ROUT - Power supply terminal (+1.8V)

13 VCC_RIN - Power supply terminal (+1.8V)14 REGEN I Internal regulator control signal input terminal "L": regulator on Fixed at "H" in this set

15 INT O Interrupt request signal output to the main CPU

16 WAIT/DTACK O Data acknowledge signal output terminal Not used

17 WR I Write enable signal input from the main CPU

18 RD I Read enable signal input from the main CPU

19, 20 EB0, EB1 I Byte enable signal input terminal Not used

21 VCC_HOST - Power supply terminal (+3.3V)

22 CS I Chip select signal input from the address decoder

23 to 30 D15 to D8 I/O Two-way data bus with the USB controller, main CPU, SD-RAM and NOR flash memory

31 to 33 D7 to D5 I/OTwo-way data bus with the USB controller, main CPU, NAND flash memory, SD-RAM and

NOR flash memory


35 to 39 D0 to D4 I/O Two-way data bus with the USB controller, main CPU, NAND flash memory, SD-RAM andNOR flash memory

40 BS I Bus cycle start signal input terminal Not used

41 A22 I Address signal input terminal Not used

42 VCC_ROUT - Power supply terminal (+1.8V)

43 to 47 A21 to A17 I Address signal input terminal Not used

48 VCC_HOST - Power supply terminal (+3.3V)


50 to 64 A15 to A1 I Address signal input from the main CPU



67 SDCD ISD memory card detect signal input from the SD memory card slot

"L": SD memory card slot in

68 SDDAT3 I/O Two-way 4-bits data bus with the SD memory card slot

69 MDIO11 I/O Not used

70 MSDAT0 I/O Two-way data bus with the memory stick duo slot



73 VCC_3V - Power supply terminal (+3.3V)





78 to 84MDIO15, MDIO19 to

MDIO24I/O Not used

85 SDWP I SD memory card write protect switch signal input from the SD memory card slot86 VCC_ROUT - Power supply terminal (+1.8V)

87 MSCLK O Serial clock signal output to the memory stick duo slot


89 SDCLK O Serial clock signal output to the SD memory card slot

IC Pin Function Description


35/74

PRS-505

35



91, 92 SDDAT0, SDDAT1 I/O Two-way 4-bits data bus with the SD memory card slot

93 MSBS O Bus state signal output to the memory stick duo slot

94 SDDAT2 I/O Two-way 4-bits data bus with the SD memory card slot


96 VCC_3V - Power supply terminal (+3.3V)

97 SDCMD I/O Command signal input/output with the SD memory card slot


99 MSCD IMemory stick duo detect signal input from the memory stick duo slot

"L": memory stick duo slot in



36/74

PRS-505

36

MAIN BOARD IC301 A3P125-VQG100 (INDICATOR CONTROLLER)



2 to 8 PD15 to PD9 I Video data input from the main CPU


10, 11 PD8, PD7 I Video data input from the main CPU

12 GND - Ground terminal13 PD6 I Video data input from the main CPU


15, 16 PD5, PD4 I Video data input from the main CPU

17 VCC - Power supply terminal (+1.5V)

18 VCCI - Power supply terminal (+3.3V)

19 to 22 PD3 to PD0 I Video data input from the main CPU

23 PSFL I Not used

24 VMV - Power supply terminal (+3.3V)


26 FCLK I Frame clock signal input from the main CPU

27 LCLK I Latch clock signal input from main CPU

28 PCLK I Pixel clock signal input from the main CPU29 SDLE O Latch enable signal output to the ink indicator element

30 to 36 SDDO0 to SDDO6 O Video data input from the main CPU



39 VCC1 - Power supply terminal (+3.3V)

40 SDDO7 O Video data input from the main CPU

41 SDCLK O Clock signal output to the ink indicator element

42 SDOE O Output enable signl output to the ink indicator element

43 GDOE O Output enable signal output to the ink indicator element

44 GDSP O Sharp panel signal output to the ink indicator element

45 GDCLK O Clock signal output to the ink indicator element


47 TCK - Not used

48 TDI - Not used

49 TMS - Not used



52 VPUMP - Not used

53 NC - Not used

54 TDO - Not used

55 TRST - Not used

56 VJTAG - Not used

57 to 59 SDCE5 to SDCE3 O Chip enable signal output terminal Not used

60 to 62 SDCE2 to SDCE0 O Chip enable signal output to the ink indicator element

63 SDSHR O Not used64 GDRL O Not used

65 PWRCOM O Command signal output to the VCOM switch

66 VCCI - Power supply terminal (+3.3V)



69 PWR2 O Power supply control signal output terminal

70 BDR1 O Border control signal output terminal

71 BDR0 O Border control signal output terminal





76 SPIDO O Not used

77 SPICLK O Not used

78 SPIDI I Not used

79 SPICS O Not used


37/74


38/74

PRS-505

38

MAIN BOARD IC401 SN412005RHLR (CHARGE CONTROL)


1 LDO O Power supply (+3.3V) output terminal

2 STAT1 O Charge state signal output to the sub CPU and LED drive signal for CHARGE indicator

3 STAT2 O Charge state signal output to the sub CPU

4 AC I Power supply input from the AC adaptor

5, 6 BAT I/O Power supply voltage input from the rechargeable battery or charge voltage output to therechargeable battery

7 ISET2 ICharge current setting siganal input from the sub CPU "L": 100 mA, "H": 500 mA

Fixed at "H" charging voltage in this set

8 PSEL ICharge source selection siganal input terminal "L": USB (pin 20), "H": AC (pin 4)

Fixed at "H" charging voltage in this set

9 CE I Chip enable signal input terminal Not used

10 ISET1 O Setting terminal for AC input charge current and AC precharge/termination

11 VSS - Ground terminal

12 TS I Thermal detection signal input terminal

13 DPPM I Setting terminal for the dinamic power pass management

14 TMR ITimer program input terminal (Becomes impossible to do safety timer and charge

termination when connecting LOD (pin 1))

15 to 17 OUT O Power supply voltage output terminal

18 XACPG OExternal DC power state detection signal output to the sub CPU

"L": external DC power on

19 XUSBPG O USB power state detection signal output terminal Not used

20 USB I Charge voltage input terminal from the USB connector



39/74

PRS-505

39

MAIN BOARD IC801 HD64F38004FP10V-V198 (SUB CPU)


1 BATT-DC I Power supply input from the AC adaptor

2 X1 I System clock input terminal (32.768 kHz)

3 X2 O System clock output terminal (32.768 kHz)


5 OSC2 O System clock output terminal (4.9152 MHz)6 OSC1 I System clock input terminal (4.9152 MHz)

7 TEST I Connect to ground

8 XRESET I System reset signal input terminal "L": reset

9 ISET1 I Charge current setting siganal input terminal

10 ISET2 O Charge current setting siganal output to the charge control

11 to 13 P33 to P35 - Connect to power supply

14, 15 STAT1, STAT2 I Charge state monitor input from the charge control


17 to 19 V1 to V3 - Connect to power supply

20 PWRON O Main power on/off control signal output terminal "H": main power on

21 AD_ON O Rechargeable battery input control signal output terminal "H": rechargeable battery input

22 POR O Power on reset signal output to the main CPU "H": reset23 XM_RESET O Master reset signal output to the main CPU "L": reset

24 USBON O USB charge on/off control signal output terminal "H": USB charge on

25 to 29KEY_OUT7 to

KEY_OUT3O Key scan signal output terminal Not used

30 to 32KEY_OUT2 to

KEY_OUT0O Key scan signal output terminal

33 to 40 KEY_IN7 to KEY_IN0 I Key scan signal input terminal

41 KEY-INT I Key scan interrupt input from the KEY-ON (pin 53)

42 CTS I Clear to send signal input from the main CPU

43 USBDET I USB cable connect signal input terminal "H": USB cable is connected

44 LOW-BATT-LI I Rechargeable battery low detect signal input terminal

45 WKP3 I Not used

46 USBCHG I USB charge enable signal input from the main CPU

47 DCDET IExternal DC power state detection signal input from the charge control

"L": external DC power on

48 STBY_SW I Power switch signal input terminal

49 KEYLED O LED drive signal output terminal Not used

50 LED_1 O LED drive signal output terminal for USB indicator "H": LED on

51 LED_2 O LED drive signal output terminal Not used

52 USBBOOT O Main CPU boot mode control signal output to the main CPU

53 KEY-ON O Key scan interrupt signal output to the KEY-INT (pin 41)

54 P95 O Connect to power supply


56 IRQAEC I Not used

57 RTS O Request to send signal output to the main CPU

58 RXD I Serial data input from the main CPU

59 TXD O Serial data output to the main CPU

60 IRQ0 I Not used

61 AVCC - Power supply terminal (+2.9V)

62 AN0 I Not used

63 BATT-LI I Rechargeable battery input terminal

64 AN2 I Not used


40/74


41/74


42/74


43/74

PRS-505

43


P11 DQM1 O Data enable signal output to the SD-RAM

P12 XRAS O Row address select signal output to the SD-RAM

P13 SDCKE1 O Clock enable signal output to the SD-RAM Not used

P14 CLKO O Host clock signal output to the memory stick duo/SD memory card controller

P15 XRESET-SF O Not used

R1 A6 O Address signal output to the memory stick duo/SD memory card controller, USB controller,SD-RAM and NOR flash memory

R2 D11 I/OTwo-way data bus with the memory stick duo/SD memory card controller, USB controller,

SD-RAM and NOR flash memory

R3 XEB1 O Byte strobe signal output terminal Not used

R4 XEB2 OWrite enable signal output to the memory stick duo/SD memory card controller,

USB controller and NOR flash memory

R5 XOE O Read enable signal output terminal


NAND flash memory, SD-RAM and NOR flash memory

R7 A0 O Address signal output terminal Not used

R8 SDCLK O Clock output to the SD-RAM


NANDflash memory, SD-RAM and NOR

flash memory

R10 GPSRAM1 O Not used


NAND flash memory, SD-RAM and NOR flash memory

R12 DQM3 O Data enable signal output to the SD-RAM

R13 XCAS O Column address select signal output to the SD-RAM

R14 XSDWE O Write enable signal output to the SD-RAM

R15 AVDD1 - Power supply terminal (+2.9V)


44/74


45/74

45

PRS-505

51 3-225-873-31 SCREW (M1.4)

52 X-2187-668-1 BATTERY ASSY, (ION) STORAGE

53 3-348-998-81 SCREW (M1.4)

54 A-1362-421-A CONNECT FLEXIBLE BOARD, COMPLETE

55 3-269-318-01 NUT PLATE

56 X-2187-667-1 MAIN BOARD, COMPLETE (for SERVICE)

57 3-283-362-01 COPPER LEAF SHEET B

58 3-269-553-01 SHEET (A), ADHESIVE

59 3-217-911-01 SHAFT (SPRING)

60 3-260-808-01 SPRING, COMPRESSION

61 3-274-373-01 SHEET (B), ADHESIVE

62 3-217-904-01 FRAME

63 A-1362-419-A SLOT FLEXIBLE BOARD, COMPLETE

64 3-335-797-01 SCREW (M1.4X2), TOOTHED LOCK

65 3-281-571-01 SHEET (BATT), RUBBER

66 3-277-818-01 SHEET (D), ADHESIVE

67 3-280-819-01 SPACER (CON_SD)

68 3-280-818-01 SPACER (CON_USB)

69 3-275-559-01 SHEET (R2)

IIE1 X-2187-669-2 ELEMENT ASSY, INK (INDICATION)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

7-2. MAIN SECTION

51

52

53

6566

54

57

55

5363

64

68

56

53

69 67

58

59

60

61

62

Note: When peeling off adhesive sheet,


IIE1

Ver. 1.1


46/74


47/74


PRS-505

4747

C406 1-100-672-11 CERAMIC CHIP 10uF 20% 16V

C407 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V


C411 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V


C413 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V C416 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V


C418 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V







C425 1-164-156-11 CERAMIC CHIP 0.1uF 25V












C807 1-164-848-11 CERAMIC CHIP 8PF 0.5PF 50V




C811 1-805-216-21 VARISTOR, CHIP C812 1-805-216-21 VARISTOR, CHIP

C813 1-805-216-21 VARISTOR, CHIP












C965 1-164-854-11 CERAMIC CHIP 15PF 5% 50V

C966 1-164-856-81 CERAMIC CHIP 18PF 5% 50V





C1003 1-110-569-11 TANTALUM CHIP 47uF 20% 6.3V






C1009 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C1010 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V







C1017 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C1018 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V


















































C1808 1-104-913-11 TANTALUM CHIP 10uF 20% 16V C1809 1-104-913-11 TANTALUM CHIP 10uF 20% 16V


MAIN


48/74


49/74


50/74


51/74


PRS-505

5151

R2215 1-218-965-11 RES-CHIP 10K 5% 1/16W

R2216 1-218-965-11 RES-CHIP 10K 5% 1/16W

R2219 1-218-965-11 RES-CHIP 10K 5% 1/16W

R2238 1-218-965-11 RES-CHIP 10K 5% 1/16W

R2239 1-218-965-11 RES-CHIP 10K 5% 1/16W

R2264 1-218-977-11 RES-CHIP 100K 5% 1/16W R2267 1-218-977-11 RES-CHIP 100K 5% 1/16W

R2268 1-218-977-11 RES-CHIP 100K 5% 1/16W

R2527 1-218-947-11 RES-CHIP 330 5% 1/16W

< COMPOSITION CIRCUIT BLOCK >

RB201 1-234-372-11 RES, NETWORK 100 (1005X4)

RB202 1-234-372-11 RES, NETWORK 100 (1005X4)

RB203 1-234-372-11 RES, NETWORK 100 (1005X4)

RB301 1-234-372-11 RES, NETWORK 100 (1005X4)

RB302 1-234-372-11 RES, NETWORK 100 (1005X4)

RB303 1-234-372-11 RES, NETWORK 100 (1005X4)

RB304 1-234-372-11 RES, NETWORK 100 (1005X4)

RB801 1-234-372-11 RES, NETWORK 100 (1005X4)

RB802 1-234-372-11 RES, NETWORK 100 (1005X4)

RB803 1-234-372-11 RES, NETWORK 100 (1005X4)

RB804 1-234-372-11 RES, NETWORK 100 (1005X4)

RB805 1-234-379-21 RES, NETWORK 22K (1005X4)

RB806 1-234-379-21 RES, NETWORK 22K (1005X4)

RB807 1-234-379-21 RES, NETWORK 22K (1005X4)

RB808 1-234-379-21 RES, NETWORK 22K (1005X4)

RB2001 1-234-372-11 RES, NETWORK 100 (1005X4)

RB2002 1-234-372-11 RES, NETWORK 100 (1005X4)

RB2003 1-234-372-11 RES, NETWORK 100 (1005X4)

RB2004 1-234-372-11 RES, NETWORK 100 (1005X4)

RB2005 1-234-372-11 RES, NETWORK 100 (1005X4)

RB2006 1-234-387-21 RES, NETWORK 330 (1005X4) RB2007 1-234-372-11 RES, NETWORK 100 (1005X4)

RB2008 1-234-383-21 RES, NETWORK 470K (1005X4)

RB2009 1-234-383-21 RES, NETWORK 470K (1005X4)

RB2010 1-234-383-21 RES, NETWORK 470K (1005X4)

RB2011 1-234-387-21 RES, NETWORK 330 (1005X4)

RB2012 1-234-387-21 RES, NETWORK 330 (1005X4)

RB2013 1-234-387-21 RES, NETWORK 330 (1005X4)

RB2014 1-234-383-21 RES, NETWORK 470K (1005X4)

RB2015 1-234-383-21 RES, NETWORK 470K (1005X4)

RB2016 1-234-383-21 RES, NETWORK 470K (1005X4)

< VARIABLE RESISTOR >

RV1801 1-225-901-21 RES, ADJ, CERMET (3 TYPE) 10K

< SWITCH >

S801 1-786-515-21 SWITCH, TACTILE (RESET)

S873 1-786-293-21 SWITCH, TACTILE (VOL -)

S874 1-786-293-21 SWITCH, TACTILE (VOL +)

< COIL >

T951 1-400-284-21 COIL, COMMON MODE CHOKE

< THERMISTOR (POSITIVE) >

THP401 1-804-949-11 THERMISTOR, NTC (SMD)

< VIBRATOR >

X102 1-813-180-21 VIBRATOR, CERAMIC (11.2896MHz)

X801 1-795-029-11 VIBRATOR, CRYSTAL (32.768kHz)

X802 1-813-181-21 VIBRATOR, CERAMIC (4.9152MHz)

X951 1-813-877-11 VIBRATOR, CRYSTAL (12MHz)

X1002 1-795-029-11 VIBRATOR, CRYSTAL (32.768kHz)

************************************************************

A-1362-419-A SLOT FLEXIBLE BOARD, COMPLETE *****************************

When SLOT FLEXIBLE board is defective, exchange the entire mounted board.

************************************************************

MISCELLANEOUS

**************

5 X-2187-666-1 CASE LC ASSY (for BLUE)

(including KEYflexible board)

5 X-2187-670-1 CASE SC ASSY (for SILVER)

(including KEYflexible board)

52 X-2187-668-1 BATTERY ASSY, (ION) STORAGE

IIE1 X-2187-669-2 ELEMENT ASSY, INK (INDICATION)

*************************************************************

ACCESSORIES

************

1-829-882-12 CORD, CONNECTION (USB) (USB cable)

3-273-916-01 CARD (SD), DUMMY (Dummy card)

3-273-917-01 CARD (MS DUO), DUMMY (Dummy card)

3-274-631-01 GUIDE, QUICK START (ENGLISH, FRENCH)

3-274-632-01 SOFT, APLICATION (CD-ROM: eBook Library

software/Users Guide (PDF)/Sample Contens)

SLOT FLEXIBLEMAIN

Ver. 1.1


52/74


53/74


54/74


55/74


56/74


57/74


58/74

PRS-505

PRS-505

66

IC101

IC108

C129

C128

C112 R107

C113 R108

C111

C110

C109

R106

IC107

R110

R102Q105

R103

R104

R101

C103

C104

L102

Q104

C

108

R109

C

C123

C124

C107

R117

R116

C141

TP1590

X102

AK4365VN-L

TC7SH08FU

2204V

2204V

0.1 10

0.1 10

10

0.1

0.0047

10k

TC7SHU04FU

470

1M2SC4738F-Y/GR

4.7k

4.7k

100k

0.001

0.1

2SA1832F-GR

0.01

10

0

10

0.1

0.01

100

330

0.01

11.2896MHz

BHRESET

GND

V2

GND

VCC

(2/10)

VCC

GND

NC

SWITCHING

B+SWITCH

Q104,105

CLOCKBUFFER

AUDIOD/A

CONVERTER

100H

(Page 5)


(Page 5)


59/74

PRS-50577

TP1815

TP1814

TP1816

TP1813

D1801

Q1804

R1816

IC1802

IC1805

D1802

D1804

D1805

Q1809

R1843

R1802

R1884

C1816

R1907

C1808

L1811 C1804

R1824

R1823

C1806

R1835 R1836

R1883

C1801

R1837

D1803

C1843

R1894

R1895

R1893 C1845 C1818C1834

R1881

R1898 R1807

D1810

R1908

C1809C1835

C1805

R1910

R1899

R1876

C1879R1827

R1828

R1826 C1842 R1891

R1890

C1855

R1892 C1810

C1814 R1888

R1889

R1887

R1886

Q1805

R1885

IC1806

C1866

TP354

R1840

C1884

C1822

IC1803

D1807

R1829R1863

R1821

C1812

R1860

R1861

R1832

C1821

R1842

R1841

RV1801

R1849 R1848 R1815

IC1807

C1885

L1812

L1803

C1823

R1864

R1814

D1808

D1809

Q1806

L1804BAT760-115

SSM6J07FU

100k

LT3467ES6#TR

LT1931ES5#TR

1SS362-TE85L

BAT760-115

1SS362-TE85L

2SA1832F-GR

10k

0

10k

0.47

100k

1016V

10

82k

24k

10

15k 27k

10k

0.0022

240

BAT760-115

0.1

24k

27k

100k 0.1 11

100k

1k 10k

1SS388(TPL3)

100k

1016V 0.47

10

0

100

10k

0.0191k

30k

11k 0.1 33k

22k

0.1

100k 1

1 100k

10k

56k

56k

2SC4738F-Y/GR

100k

TC7W53FK

100

6.3V

3.3k

0.1

0.1

NJM2904V(TE2)

1SS362-TE85L

1k10k

100k

0.22

100k

100k

1k

0.1

47k

4.7k

10k

1k 100k 680k

NJM2904V(TE2)

0.1

0.1

680k

1k

1SS387-TPL3

1SS387-TPL3

2SC4738F-Y/GR

8PWR_NEG

8PWR_POS

UNREG

GND

UNREG

GND

VCC

CH0

CH1

AGND

VEE

INH

COM

-

V-

V+

SW

GND

NFB

SHDN

VIN

SW

SS GND

FBSHDN

VIN

V-

V+

(3/10)

4

3

DC/DC

CONVERTER

SWITCHING

REGULATOR

CURRENT

DETECT

COMPARATOR,VCOMAMP

VCOMSWITCH

S

REGULATOR

REGULATOR

B+SWITCH

10H

10H

+

+

+

+

(Page 8)


(Page 14)

(Page 8)

(Page 11)


60/74

PRS-505

PRS-505

88

TP312

TP313

TP314

TP315

TP316

TP319

TP318

IC301

TP301

TP350

TP349

C317 R330

R333

R337

C318 C320

TP302

TP303

TP304

TP305

TP306

TP307

TP308

TP309

TP310

TP311

C325

C323

C324

R389

C305

R364

C306

R388

C322R387R355

R322

C302

C301

TP347

TP348

R302

C303

R303

C304

L301

R326

R334

TP322

R377

C311

C310

C309

TP329

TP330

C308

R3

R378

C3

C312

R328

C316

C315

TP326

R301

C321

R349

RB303

RB301

IC303

R327

R365

C319

RB302

TP353

TP352

TP351

RB304

C326

TP317

IC302

A3P125-VQG100

0.1 0

R332470k

330 3

30

R336470k

0.1 0.1

0.1

0.1

0.1

1k

0.1

1k

0.1

1k

0.11k0

470k

1

1

470k

1

0

1

0100

0

10

0.1

1

0.10

42

4.725V

0

0.1

0.1

0

0.1

100

100

100

XC6215B312NR

0

0

0.1

100

100

10

XC6215B152NR

GND

VCORE

UNREG

PCA3PIO

PCA3PCORE

LCDBUS

VCORE

PD0

PD1

PD2

PD3

PD4

PD5

PD6

PD7

PD8

PD9

PD10

PD11

PD12

PD13

PD14

PD15

FCLK

LCLK

PCLK

ERR

STBY

RDY

PDOE

SDLE

SD0

SD1

SD2

SD3

SD4

SD5

SD6

SD7

SDCLK

SDOE

GDOE

GDSP

GDCLK

SDCE0

SDCE1

SDCE2

8COM_CTRL

8BORDER0

8BORDER1

8PWR_POS

8PWR_NEG

8PWR_GATE

SRA3P

8BORDER0

8BORDER1

8PWR_POS

8PWR_NEG

8PWR_GATE

8COM_CTRL

GND

PD15

GND

GND

GND

GND

GND

GND

VCC

TCK

TDI

TMS

VPUMP

NC

TDO

TRST

VJTAG

VCC

GND

VCC

PD14

PD13

PD12

PD11

PD10

PD9

PD8

PD7

PD6

PD5

PD4

PD3

PD2

PD1

PD0

PSFL

VCC

FCLK

LCLK

PCLK

SDLE

SDDO0

SDDO1

SDDO2

SDDO3

SDDO4

SDDO5

SDDO6

SDDO7

SDCLK

SDOE

GDOE

GDSP

GDCLK

SDCE0

SDCE1

SDCE2

SDCE3

SDCE4

SDCE5

SDSHR

GDRL

PWRCOM

PWR2

BDR1

BDR0

PWR0

PWR1

SPIDO

SPICLK

SPIDI

SPICS

I2CSCL

I2CSDA

PWR3

RESERVED

TEST2

TEST0

TEST1

RESERVED

RESERVED

RESERVED

PDOE

RESET

RDY

STBY

ERR

RESERVED

VCCI

VMV

VCCI

VMV

VCCI

VMV

VCCIB

(4/10)

INDICATORCONTROLLER

REGULATOR

+3.1V

+1.5VREGULATOR

GND

VMV

GND

GND

GND

10H

2-6. SCHEMATIC DIAGRAM - MAIN Boar d (4/10) -

(Page 14)

(Page 10)

(Page 5)

(Page 7)

(Page 10)


61/74


62/74


63/74


64/74


65/74

PRS-5051313

IC1112

IC1113

IC1116

IC1117

R1103

IC1101

IC1102

IC1107

C1104

C1109

C1110

C1112C1101

C1115

C1114

C1103

L1101

C1108

TP1554

TP1546

TP1547

TP1548

TP1549

TP1550

TP1551

TP1552

TP1553

TP1555

TP1556

TP1557

TP1558

TP1559

TP1560

TP1561

TP1564

TP1566

TP1568

TP1570

TP1572

TP1576

TP1578

TP1580

TP1582

TP1584

TP1542

TP1543

TP1574

SN74LVC244APWR

SN74LVC244APWR

TC7SZ125FU

TC7SZ125FU

0

TC7MP245FK(EL)

TC7MP245FK(EL)

TC7MP01FK

0.1

0.1

0.1

0.110

0.01

0.01

0.1

0.1

R/#W

#OE

EB2

#CS0

CS1

CS3

CS4

CS5

HRESET

BHRESET

#CS0

BR/W

CS1

HRESET

CS4

CS3

A(24-0)

D(31-0)

V2

GND

D0

D1

D2

D3

D4

D5

D6

D7

D8

D9

D10

D11

D12

D13

D14

D15

BD0

BD1

BD2

BD3

BD4

BD5

BD6

BD7

BD8

BD9

BD10

BD11

BD12

BD13

BD14

BD15

A2

A4

A6

A8

A10

A12

A14

A16

A18

A20

A22

BA3

BA5

BA7

BA9

BA11

BA13

BA15

BA17

BA19

BA21

BA23

EB2

R/W

OE

EB2

R/W

OE

R/W

A1

DIR

A1

A2

A3

A4

A5

A6

A7

A8

GND

VCC

OE

B1

B2

B3

B4

B5

B6

B7

B8

DIR

A1

A2

A3

A4

A5

A6

A7

A8

GND

VCC

OE

B1

B2

B3

B4

B5

B6

B7

B8

1OE

1A1

2Y4

1A2

2Y3

1A3

2Y2

1A4

2Y1

GND

VCC

2OE

1Y1

2A4

1Y2

2A3

1Y3

2A2

1Y4

2A1

1OE

1A1

2Y4

1A2

2Y3

1A3

2Y2

1A4

2Y1

GND

VCC

2OE

1Y1

2A4

1Y2

2A3

1Y3

2A2

1Y4

2A1

GND

VCC

GND

VCC

(9/10)

BUFFER

BUFFER

BUFFER

BUFFER

ANDGATE, INVERTER

VCC

GND

BUFFER

22H


(Page 12)

(Page 9)

(Page 10)

(Page 9)

(Page 9)

(Page 5)


66/74


67/74

15

PRS-505

3. ELECTRICAL PARTS LIST

X-2187-667-1 MAIN BOARD, COMPLETE (for SERVICE)

********************

< CAPACITOR >





















C128 1-137-859-11 TANTALUM CHIP 220uF 20% 4V

C129 1-137-859-11 TANTALUM CHIP 220uF 20% 4V
















C216 1-100-506-91 CERAMIC CHIP 1uF 20% 6.3V C217 1-100-506-91 CERAMIC CHIP 1uF 20% 6.3V




















C311 1-119-869-91 CERAMIC CHIP 10uF 35V

C312 1-113-987-11 TANTALUM CHIP 4.7uF 20% 25V

C313 1-113-987-11 TANTALUM CHIP 4.7uF 20% 25V





















C411 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V C412 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V



MAIN

Note:

Due to standardization, replacements in

the parts list may be different from the

parts specified in the diagrams or the com-

ponents used on the set.

-XX and -X mean standardized parts, so

they may have some difference from the

original one.

Items marked * are not stocked since

they are seldom required for routine ser-

vice.

Some delay should be anticipated when

ordering these items.

CAPACITORS

uF: F

COILS

uH: H

RESISTORS

All resistors are in ohms.

METAL: Metal-film resistor.

METAL OXIDE: Metal oxide-film resistor.

F: nonflammable

SEMICONDUCTORS

In each case, u: , for example:

uA. . : A. . , uPA. . , PA. . ,

uPB. . : PB. . , uPC. . , PC. . ,

uPD. . : PD. .

When indicating parts by reference num-

ber, please include the board name.

The components identified by mark 0

or dotted line with mark 0are critical for

safety.

Replace only with part number specified.

Les composants identifis par une marque

0sont critiques pour la scurit.

Ne les remplacer que par une pice portant

le numro spcifi.


68/74


69/74


PRS-505

1717













< CONNECTOR >

CN201 1-784-625-31 CONNECTOR, FFC/FPC (ZIF) AN 30P

* CN302 1-817-544-71 CONNECTOR, FPC (ZIF) 39P

CN401 1-770-619-11 PIN, CONNECTOR 2P

CN801 1-821-557-31 CONNECTOR, FFC/FPC (ZIF) 12P

CN901 1-821-558-61 CONNECTOR, FFC/FPC (ZIF) 18P

< DIODE >

D101 8-719-069-55 DIODE UDZSNPTE-175.6B


D401 8-719-989-03 DIODE DAN222


D403 8-719-989-03 DIODE DAN222

D420 8-719-085-70 DIODE CRS01 (TE85R)

D802 8-719-083-42 DIODE HN2S01FU-TE85R

D1801 6-500-823-01 DIODE BAT760-115

D1802 8-719-024-71 DIODE 1SS362-TE85L

D1803 6-500-823-01 DIODE BAT760-115

D1804 6-500-823-01 DIODE BAT760-115

D1805 8-719-024-71 DIODE 1SS362-TE85L

D1807 8-719-024-71 DIODE 1SS362-TE85L

D1808 8-719-056-23 DIODE MA2S111- (K8).SO

D1809 8-719-056-23 DIODE MA2S111- (K8).SO

D1810 8-719-056-48 DIODE 1SS388 (TPL3)

D1813 8-719-024-71 DIODE 1SS362-TE85L

< IC >

IC101 6-702-290-01 IC AK4365VN-L

IC107 6-706-492-01 IC TC7SHU04FU (T5RSOJF)

IC108 6-706-487-01 IC TC7SH08FU (T5RSOYJF)

IC201 6-709-523-01 IC R5C807 IC202 6-706-487-01 IC TC7SH08FU (T5RSOYJF)

IC203 6-711-467-01 IC TC74LCX138FK (EL, K)

IC204 6-708-467-01 IC XC6213B312NR

IC205 6-708-467-01 IC XC6213B312NR

IC206 8-759-592-49 IC TC7SZ125FU (TE85R)

IC301 (Not supplied) IC A3P125-VQG100

IC302 6-711-802-01 IC XC6215B152NR

IC303 6-708-472-01 IC XC6215B312NR

IC401 6-708-160-01 IC SN412005RHLR

IC402 6-709-526-01 IC XC9226A296MR

IC403 6-711-801-01 IC XC9226A196MR

IC404 6-702-148-01 IC XC61CN2702NR

IC405 8-759-824-57 IC XC61CN3002NR IC406 6-709-520-01 IC XC6215B292NR

IC407 8-759-698-31 IC TC7WH74FK (TE85R)

IC408 6-709-522-01 IC XC61CC3202NR

IC409 6-708-467-01 IC XC6213B312NR

IC801 6-807-759-01 IC HD64F38004FP10V-V198

IC802 6-705-886-01 IC XC61CN2502NR

IC953 (Not supplied) IC S1R72V17B00A20B

@ IC1001 6-705-206-01 IC MC9328MXLVP20R2

IC1002 6-706-815-01 IC TMP75AIDR

IC1101 6-705-485-01 IC TC7MP245FK (EL)

IC1102 6-705-485-01 IC TC7MP245FK (EL)

IC1106 (Not supplied) IC K9F2G08U0A-PCBOT

IC1107 6-711-803-01 IC TC7MP01FK

IC1108 6-600-060-01 IC TC7WZ32FK (TE85R)

IC1112 8-759-679-53 IC SN74LVC244APWR

IC1113 8-759-679-53 IC SN74LVC244APWR

IC1116 8-759-592-49 IC TC7SZ125FU (TE85R)

IC1117 8-759-592-49 IC TC7SZ125FU (TE85R)

IC1201 (Not supplied) IC K4M561633G-BN75T

IC1202 (Not supplied) IC K4M561633G-BN75T

IC1203 (Not supplied) IC S29AL016D90TFI020H-PRS02

IC1802 6-705-480-01 IC LT3467ES6#TR

IC1803 8-759-337-40 IC NJM2904V (TE2)

IC1805 6-705-481-01 IC LT1931ES5#TR

IC1806 8-759-675-54 IC TC7W53FK (TE85R)

IC1807 8-759-337-40 IC NJM2904V (TE2)

< COIL/JUMPER RESISTOR/FERRIT BEAD >

L102 1-469-528-91 INDUCTOR 100uH

L103 1-469-526-91 INDUCTOR 22uH

L201 1-469-525-91 INDUCTOR 10uH

L203 1-469-525-91 INDUCTOR 10uH

L204 1-469-525-91 INDUCTOR 10uH

L205 1-216-864-11 SHORT CHIP 0 L206 1-216-864-11 SHORT CHIP 0

L207 1-469-528-91 INDUCTOR 100uH

L301 1-469-525-91 INDUCTOR 10uH

L402 1-456-630-22 COIL, CHOKE 6.8uH

L403 1-456-630-22 COIL, CHOKE 6.8uH

L801 1-216-864-11 SHORT CHIP 0

L951 1-469-525-91 INDUCTOR 10uH

L952 1-469-525-91 INDUCTOR 10uH

L953 1-469-525-91 INDUCTOR 10uH

L1002 1-469-525-91 INDUCTOR 10uH

L1003 1-469-525-91 INDUCTOR 10uH

L1004 1-469-527-91 INDUCTOR 47uH

L1101 1-469-526-91 INDUCTOR 22uH L1102 1-469-526-91 INDUCTOR 22uH

L1201 1-469-526-91 INDUCTOR 22uH

L1202 1-469-526-91 INDUCTOR 22uH

L1803 1-469-869-21 INDUCTOR (EMI FERRITE) (2012)

L1804 1-469-869-21 INDUCTOR (EMI FERRITE) (2012)

L1811 1-419-627-11 COIL, CHOKE 10uH

L1812 1-419-627-11 COIL, CHOKE 10uH

< FUSE >

0PS401 1-576-415-21 FUSE (2A/32V)

< TRANSISTOR >

Q104 6-550-254-01 TRANSISTOR 2SA1832F-GR (T3SOYF

Q105 8-729-037-52 TRANSISTOR 2SD2216J-QR (TX).SO

Q401 8-729-037-52 TRANSISTOR 2SD2216J-QR (TX).SO

MAIN

Note: When IC301, IC953, IC1106, IC1202 and IC1203 on the MAIN board is damaged,

exchanged the new MAIN board for the MAIN board which IC damaged.

@ Replacing of IC1001 on the MAIN board

in this set requires a special tool.


70/74

Ref. No. Part No. Descrip

Documents

Sony Ebook Reader PRS-505