PROACTIVE AIR & SURFACE TECHNOLOGY

Solutions for the management of mold, mildew, odor & VOC’s indoors.

A major issue throughout growing facilities is the prevention & management of mold growth on product. Other issues include Mildew, Odor & VOCs. Result of this issue include dying plants; low yield; unsellable & visually bad product.

PROBLEMS FACING INDOOR GROWERS & INDUSTRY

Puradigm has developed advanced technology that takes the solution to the problem through an active air & surface purification system. •  Products developed & proven to address mold, mildew, odor and

VOCs issues. •  Technology is 3rd party validated •  Solution is working in greenhouses & grow industry •  Safe for 24/7 operation

PURADIGM TECHNOLOGY IS A SOLUTION FOR INDOOR GROWERS ISSUES

Air & Surface Purification for Indoor Growing

Mold Mildew Odor VOC’s

PURADIGM WORKS TO MANAGE

Growers have shared with us why we matter to them in what they are doing everyday to manage issues that arise from mold, mildew, odors, pathogens and other indoor environmental issues. •  Puradigm has significantly lowered visible signs of mold & mildew •  Puradigm has 3rd party validated management of particulate & pathogens •  Puradigm has controlled my off gasing & VOC’s affecting crops •  Puradigm is a odor management solution throughout our facility •  Puradigm solved my environmental air quality issues •  Puradigm improved my visible product quality •  Puradigm improved peace of mind and time loss related to environmental

management •  Puradigm has been proven safe my employees to protect 24/7 unlike many other

technologies we have utilized

WHY Puradigm?

How it Works

Puradigm Technology is a patented system of products that deliver oxiders and high energy clusters proven successful in the management of mold, mildew, odor and other environmental issues.

What is Puradigm Technology?

Puradigm High Energy Clusters and Oxiders are delivered as an application through HVAC Probes, Wall Mounted Products and Stand-Alone Units. Visible signs of improvement can be seen in up to 24 – 48 hours.

How it Works?

Outer  Membrane    

Bacteria    Cell    Wall      

Electrical  discharge  from    “High  Energy  Clusters”  blow  a  hole  in  outer  membrane.  

How a “High Energy Cluster” Works

Photo of bacteria cells AFTER exposure to High Energy Ion Clusters.

Bacteria Cells After exposure to High Energy Clusters (HEC)

B. Subtilis BEFORE exposure to oxidizer(s) B.  Sub>lis  AFTER  exposure  to  oxidizer(s)  

NOTE: B. Subtilis = surrogate for Anthrax

Bacteria Cells Before & After exposure to Oxidizers

Real World

Use Cases

C a l i f o r n i a G re e n h o u s e

Aggressive Mold Destroying over 80% of Basil Produce

Indoor Grower Solution 4,000 Sq. Ft. Greenhouse 3 – Puradigm GROW Units 1 – Puradigm PRO Unit

We just wanted you to know that the machines have done an amazing job of halting our mold problem.  We have almost no mold in our greenhouses and considering the recent weather, our greenhouses should be covered in mold...  All that to say thank you.  The Puradigm machines have been a game changer. Thank you, California Grower

R e s u l t s

C a n a d i a n G rowe r

Issue with mold, odors and CFU levels throughout facility.

GROWING

CURING

DRYING Indoor Grower Solution 4 – Puradigm GROW Units

Puradigm Technology was installed in grow rooms, curing and drying rooms. The results showed dramatic improvements in a number of areas.

Te s t i n g There was a reduced level of odor in both growing and drying rooms. Health inspector's commented on the significantly reduced level of odors using this technology. The destruction of volatile organic compounds in the air did not significantly reduce the amount of organic compounds and terpenes in the finished product. By using the technology in the grow rooms, we were able to reduce the levels of molds such as Botrytis, which resulted in a reduction of bud rot. Implementation of this technology resulted in a significant reduction of CFUs which were verified in a blind lab test. Implementation of the technology during the drying & curing process, were tested on four lots of production, which compared two lots using the Technology and two lots not using the technology. The results as shown in the lab report were dramatic. The CFU levels using the technology were the lowest we have ever achieved without using damaging sterilization methods (e.g. Irradiation)

R e s u l t s

UNTREATED  *   TREATED**       UNTREATED  *   TREATED**       UNTREATED  *   TREATED**      w/o  technology   With  Technology   Reduc>on   w/o  technology   With  Technology   Reduc>on   w/o  technology   With  Technology   Reduc>on  

Analytes   Unit     Control  1   Test  1       Control  2   Test  2       Control  3   Test  3      Bile  Tolerance  Gram  Neg.   MPN/g   >10,000   <10   99.99   >100  -­‐  <1,000   <10   99.9   >10  -­‐  <100   <10   99.9  Total  Bacteria  Count   cfu/g   290,000   <10   99.9999   160,000   20   99.9999   24,000   40   99.999  Yeasts/Molds   cfu/g   <10/6,400   <10/130   99.99   <10/41,000   <10/3,400   99.9   <10/1,100,100   <10/5,900   99.999  

This report relates only to the sample(s) and information provided to the laboratory Tests were performed according to the corresponding Compendium of Analytical Methods, Health Protection Branch and/or AOAC Official Methods

Microbiological Lab Tests of Canadian Grower September 2014

I n d o o r G rowe r

35% of crop being lost to powdery mildew and mold in both their nursery and finish grow rooms.

Solution for Indoor Grower 2 – Puradigm GROW Units

Puradigm Technology was installed in both the nursery grow room and the finish grow room. The units were sized to cover the cu. ft. area for each of the growing rooms.

R e s u l t s The  results  were  a  significant  reduc>on  in  both  the  powdery  mildew  and  the  mold  within  about  7  days.  Ini>ally  the  technology  was  killing  the  mildew  a^er  the  outbreak  had  already  occurred.  The  Technology  uses  a  high  energy  cluster  and  oxida>on  technology  to  blanket  both  the  air  and  surfaces  in  the  indoor  environment.  It  kills  spores  and  bacteria  that  are  carried  into  the  environment  by  people  and  intake  air  flow.      A^er  the  growing  rooms  were  sani>zed  by  the  Technology  the  problem  was  almost  totally  eliminated.  Grower  comment  -­‐  “This  is  a  game  changer,  this  Technology  is  amazing.  I  no  longer  have  the  fruit  loss  or  the  revenue  loss  that  I  was  experiencing.  These  units  will  pay  for  themselves  in  less  than  two  months.  I  plan  to  enlarge  my  growing  area  to  accommodate  more  plants.

Products

P U R A D I G M ® G R O W The  PURADIGM®  GROW™  has  been  designed  and  engineered  to  deliver  PURADIGM  Technology  that  is  proven  to  manage  surface  and  airborne  mold,  mildew  and  other  pathogens.    The  PURADIGM®  GROW™  is  easy  to  install  and  maintain  as  it  operates  24/7    in  industrial  facili>es.  This  product  has  been  tested  and  validated  by  reputable  labs  across  the  world  to  ensure  safety  and  effec>veness  in  managing  mold,  mildew,  bacteria,  viruses,  voc’s  and  other  dangerous  pathogens.      Applica>ons  include:  greenhouses,  food  and  seed  storage  facili>es,    and  more.

© 2014 PURADIGM / Confidential and Not for Distribution

P U R A D I G M ® P R O The PURADIGM® PRO™ is engineered for industrial and commercial applications that need the delivery of PURADIGM Technology to manage surface and airborne contaminants. The PURADIGM® PRO™ is easy to install and maintain as it operates 24/7 in harsh industrial environments. The PURADIGM® PRO™ can be wall mounted, ceiling mounted and/or as a stand alone solution. This product has been tested and validated by reputable labs across the world to ensure safety and effectiveness in managing bacteria, viruses, voc’s and other dangerous pathogens. Applications include: Commercial Greenhouse’s, Storage Facilities and more.

© 2014 PURADIGM / Confidential and Not for Distribution

P U R A D I G M ® H VA C The  PURADIGM®  HVAC™  has  been  designed  and  engineered  to  deliver  PURADIGM  Technology  that  is  proven  to  manage  surface  and  airborne  pathogens  for  almost  any  applica>on.      The  PURADIGM®  HVAC™  is  typically  installed  in  HVAC  Systems.  This  product  has  been  tested  and  validated  by  reputable  labs  across  the  world  to  ensure  safety  and  effec>veness  in  reducing  bacteria,  viruses,  voc’s  and  other  dangerous  pathogens.      Applica>ons  include:  HVAC  Systems

© 2014 PURADIGM / Confidential and Not for Distribution

Analysis &

Planning

Our team will need a basic understanding of your grow environment to gauge next step recommendations:

Environmental Analysis

•  Describe your growing environment and any know issues or problems.

•  Describe the Air Flow throughout your facility

or indoor growing systems. •  Describe the layout and sq. ft. or cu.sq.ft of

each area or zone you would like to protect.

Based on our teams review of your environment. We will make the following suggestions as next steps.

Technical Recommendations

•  Services needed to manage various issues throughout your facility.

•  Products that Puradigm can deliver to address

issues and problem.

•  Programs. Based on assessment of your environment. Our team may recommend a series of programs to assist you in management of environment.

Environmental Grade Assessment

Environment A B C D

Air Flow (ACH) Great. 60 (ACH) Good. 30 (ACH) Ok. 10 (ACH) Poor. 2 (ACH)

Environmental Load 1 2 3 4

Visible Particulate Non Low Medium High

Size (Sq. Ft.) 2500 sq. ft. 2500 sq. ft. 2500 sq. ft. 2500 sq. ft.

Typical Recommendations Units & Type Units & Type Units & Type Units & Type

-  Products 1 Grow, or 1 Pro, or HVAC Installation(s)

2 Grow or 1 Pro or HVAC Installation(s)

3 Grow & 2 Pro & HVAC Installation(s)

4 Grow & 2 Pro & HVAC Installation(s)

Estimated Budget 1,500 – 4,500 3,000 – 6,000 4,500 – 9,000 6,000 – 12,000