Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
TE
KM
EC
SOLID STATE BUZZERABSOLUTE CONTROL
CONTROLLING DEVICES
SIGNALLING DEVICES
TEKMECTM
TM
M3111204IN
®
CO
MM I T ME
NT
PE
RFECTIO
N
PCMS
(AN ISO 9001:2008 CERTIFIED COMPANY)
Ø22.5MM CONTROL & SIGNALLING DEVICES
TEKMEC make Push Button Switches, Selector Switches and Pilot Lamps are normally suitable for Control & Auxiliary Circuits, A.C. or D.C. backed
by years of proven performance in the field.These devices have contact reliability, increased operational safety, compactness and reduced labour input.
The availability of two separate models of contact blocks-rear wire connection type for panel mounting application and front wire connection type for
base mounted and other features make them an ideal choice for panels, control desks, control stations, machine tools etc.
Very good flame resistance.
Interchangeable blocks provide multiple contact configurations at site.
Tekmec’s traditional hall mark for precision & exacting quality and assurance for consistency & reliability.
Safe in operation, locking device unaffected by vibration.
Self wiping contacts ensure trouble free operation.
State-of-the-art workmanship aesthetic elegance.
Tekmec’s more than two decades of trust and confidence.
Protection against electrical shock (Unit Earthed).
Push Buttons & Selector Switches are available in Chrome Plated Metallic body & Bezel as well as in Glass filled thermoplastic body & bezel and are
functionally interchangeable. The elements are interchangeable and can be stacked without additional hardware, 1 to 4 element (NO or NC) can be used
with Push Buttons and Selector Switches. For illuminated Push Buttons 1 or 2 element (NO or NC) may be used. The Pilot Lights and illuminated switches
are suitable for direct supply or supply through series resistor, using bayonet cap filament bulb type BA-9S for both AC/DC supply from 6V to 230V.
Indicating Lights with switching device and integral LED modules can be directly mounted on panel and rated voltage can be directly applied to the module
input. These are available in Standard and barrel type enclosure in Thermoset (DMC) and Thermoplastic housing for AC/DC and AC or DC supply.
MOUNTING MATRIX
SIGUT TERMINATION
This unique feature is highly safety oriented. It increases safety to the
COMPACT 22.5mm DIAMETER
The smaller mounting diameter reduces mounting space by 30% as
compared to conventional 30.5mm design.
ENERGY SAVER
Ø22.5mm devices require lamp with 2/2.6W instead of 7 to10 Watt
Lamps used inØ30.5mm devices. This results in energy saving.
MOUNTING
Screw driver is required for fixing these devices on to panelhaving
thickness of 1 to 6mm in any position. The whole
assembly is locked into position with the help of two M4
pointed screw on the bracket. These screws also ensure
the earthing.We recommend fixing centres as per standard.
The Screws should be tightened simultaneously to an
extent as to pierce through the paint on the panel from inside.
30
40
Ø22.5mm
E = thickness of mountingpanel 1 to 6mm
E
CONTROL & SIGNALLING DEVICES Ø22.5MM(METALIC SERIES)
These devices generally comply with the requirement of IS/IEC : 60947-5-1 (2003).
TEKMECTM
INTRODUCTION
SALIENT FEATURES
user by preventing accidental contact by the user with live terminals.
1 million operations (latching mushroom head push buttons : 300 000 operations).
IS / IEC - 60947-5-1
10Aconformingto IEC ,UL508,CSAC22-2n 14,VDE0660-200.0IS/ 60947-5-1
500VDC conforming to , 600V conforming to ULIS/IEC 60947-5-1 508 and CSA C 22-2 n 14.0
IP 65 : Flush and Projecting, illuminated Push Buttons (mounted).
IP 66 : Booted and Mushroom Head Pushbuttons, Selector Switches, Pilot Lights.
Double headed push buttons.
Without pilot light : IP 40 or IP 65. With pilot light : IP 40 (IP 65 with boot).
10A cartridge fuses type g1 or N conforming to IS/IEC 60947-5-1,
utilization categories AC15 and DC13.
Operating rate : 3600 operations/hour. Load factor : 0.5.
Operation : -25 C to +40 C. Storage : -40 C to + 70 C.0 0 0 0
60mm mushroom head pushbuttons : 8g. Other pushbuttons : 15g.
(40 Hz < frequency < 500 Hz)
Pushbuttons : 70g. Mushroom Head Pushbuttons : 15g. Selector Switches :
200g. Conforming to IEC 68-2-27.
Slow break N/C or N/O.
<25 m W conforming to NF C 93-050 method A or IEC 255-7 category 3.
Flush and Projecting Pushbuttons-with 1 N/O Contact: 1daN-with 1 N/C
Contact: 0.8 daN. Additional Contacts - N/O:+0,5 daN - N/C:+0,3 daN.
Conforming to Standards
Rated Thermal Current
Rated Insulation Voltage
Degree of Protection
Conforming to IEC 529
Ambient Temperature
Rated Power
Short Circuit Protection
Mechanical Life
Operating Force
ResistanceacrossTerminals
Contact Operation
Shock Resistance
Vibration Resistance
6 12 48 130
1 2 2 2 2.6
VOLTAGE
WATTS
24
For assembly of Ø22.5mm in Ø30.5mm hole. CAT No. 9XTADP.Adoptor Ring
Filament Bulbs type BA-9S with
OAL 28mm max. CAT No. 9XTBLB.Filament Bulb
To remove or fit the bulb from front. CAT No. 9XTBPE.Bulb Extractor
Pilot Light Lens
Pilot Light Lens Assy.
Lens Holder assembly with polycarbonate Lens & Ring CAT No. 9XTILST-CP.
Unbreakable Polycarbonate Lens CAT No. 9XTILP.
Lens Holder assembly with Polycarbonate Lens CAT No.9XTIL-CP.
Legend Plate Standard inscription available CAT No. 9XT-IP.
Protective Boot For Booted Actuator, oil and water tight seal for IP 65 CAT No. 9XTABB.
Pad Lock For Mushroom Actuator CAT No. 9XTAM-PD and for Projecting Actuator CAT No. 9XTAP-PD.
Standard Inscription
Available
Legend Plate 60mm yellow with black characters for Emergency Stop.
STOP
UP
START
CLOSE
REVERSE
OPEN
FORWARD
OFF
FAST
ON
SLOW
INCH
RESET
DOWN
Illuminated Push Button Lens Assy.
TECHNICAL SPECIFICATIONS
CONTROL & SIGNALLING DEVICES Ø22.5MM(METALIC SERIES)
TEKMECTM
ACCESSORIES AND SPARES
CONTROL & SIGNALLING DEVICES Ø22.5MM(METALIC SERIES)
TEKMECTM
SELECTION CHART
PRODUCTCONTACT
TYPEDESCRIPTION COLOUR REFERENCE
DIMENSION
(In mm)
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
FLUSH BUTTON
Spring Return
PROJECTING BUTTON
Spring Return
PROJECTING BUTTON
Push to On Push to Off
BOOTED BUTTON
Spring Return
For Flush Actuator
MUSHROOM BUTTON
WITH PADLOCKING DEVICE
(HEAD Ø40mm) Spring Return
MUSHROOM STAYPUT BUTTON
WITH PADLOCKING DEVICE
STAYPUT
(HEAD Ø40mm)
Press to Lock & Turn to Reset
(HEAD Ø30mm)
TWIN BUTTONSpring Return with
Green Knob marked I &
Red Knob marked O
LUMINOUSTWIN BUTTON
SPRING RETURN
With Green Knob markedI&
RedKnob markedO with Lamp
Holderwith BA9Sbulb 2.6W &with ClusterLED
BLACK
GREEN
RED
BLUE
YELLOW
GREEN
RED
BLACK
BLACK
GREEN
RED
BLUE
YELLOW
9XTAF-1
9XTAF-2
9XTAF-3
9XTAF-4
9XTAF-6
9XTAF-8
9XTAP-2
9XTAP-3
9XTAP-4
9XTAP-6
9XTAP-8
9XTAPPN-3
9XTAPPN-4
9XTAPPN-2
9XTAB-2
9XTAB-3
9XTAB-4
9XTAB-6
9XTAB-8
BLACK
GREEN
RED
9XTAM-2
9XTAM-3
9XTAM-4
9XTAM-PD
GREEN
RED
9XTAPR-3
9XTAPR-4
9XTAPR-PD
9XTAPR-S
GREEN
RED
9XTADBLSTR-3
9XTADBLSTR-4
9XTADBLST-3
9XTADBLST-4
GREEN
RED
9XTADB-3
9XTADB-4
WHITE
BLACK
GREEN
RED
BLUE
YELLOW
–
–
NO
NC 9XTAK-1L
9XTAK-2L
9XTAK-3L
9XTAK-PL
9XTAP-RR
9XTAF-RR
RELAY RESET BUTTONSpring Return
Projecting Button
Flush Button
MUSHROOM HEAD
KEY LOCKABLE ACTUATORKEY REMOVABLE IN :
Pressed (Actuated) Position
Unpressed (Unactuated) Position
Pressed & Unpressed Position
Press to Lock, Key to Reset
RED
REDBLACK
SELECTION CHART
CONTROL & SIGNALLING DEVICES Ø22.5MM(METALIC SERIES)
TEKMECTM
PRODUCTCONTACT
TYPEDESCRIPTION COLOUR REFERENCE
DIMENSION
(In mm)
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
9XTAS-5
9XTAS-5A
9XTAS-4
9XTAS-4A
9XVAS-39XVAS-3A
9XTAS-29XTAS-2A
9XTAS-19XTAS-1A
9XTA4-3CL9XTA5-3CL9XTA6-3CL
9XTA1-2CL9XTA2-2CL9XTA3-2CL
9XTA-2S
9XTA-3S
SELECTOR MAINTAINED
CONTACTTwo Position
Three Position
KEY SELECTOR TWO POSITION
MAINTAINED CONTACTKEY REMOVABLE IN :
Right Position
Left Position
Right & Left Position
KEY SELECTOR THREE POSITION
MAINTAINED CONTACTKEY REMOVABLE IN :
Right & Left Position Center Off
Left, Center and Right Position
Center Position Only
SPRING RETURN SELECTOR
TWO POSITIONLeft to right without Lock
Left to Right With Lock,
Key removable in Right Position
BLACK
SPRING RETURN SELECTOR
TWO POSITIONRight to Left Without Lock
Right to Left With Lock,
Key removable in Left Position
BLACK
SPRING RETURN SELECTOR
THREE POSITIONLeft to Center maintained on Right
All Contacts open in Center position
Without Lock, With Lock
Key removable in Center position
BLACK
SPRING RETURN SELECTOR
THREE POSITIONRight to Center Maintained on Left
All Contacts open in Center position
Without Lock, With Lock
Key removable in Center position
BLACK
SPRING RETURN SELECTOR
THREE POSITIONLeft to Center & Right to Center
All Contacts open in Center position
Without Lock, With Lock
Key removable in Center position
BLACK
BLACK
BLACK
BLACK
NO
NC
LUMINOUS SELECTOR2/3 POS.
with Lamp Holder,
with polycarbonate lense,
with Bulb, but without
Contact Element
9XTA2SILR9XTA2SIL
GREENREDAMBERBLUECLEARYELLOW
9XTA3SILR9XTA3SIL
TWO POSITION
THREE POSITION
NO
NC
LUMINOUS BUTTON
SPRING RETURN
with Lamp Holder with Bulb BA9S 2.6W
with polycarbonate Lense, but without
Contact Element
GREENREDAMBERBLUEWHITEYELLOW
9XTALSTR9XTALST
PRODUCTCONTACT
TYPEDESCRIPTION COLOUR REFERENCE
DIMENSION
(In mm)
--
–
--
–
PILOT LIGHT
Lamp Holder with Bulb BA9S 2.6W
With Series Resistance
For direct connection upto 130V supply
GREENREDAMBERBLUECLEARYELLOW
9XTILR9XTIL
LED STANDARD INDICATING LIGHT
WITH CLUSTER/CHIP LED AND
INTEGRAL CIRCUIT
in Thermoplastic Housing and Polycarbonate lense
with CLUSTER/CHIP LED and integral circuit
suitable for 220V,110V,48V, 24V,12V AC/DC supply
WHITEGREENREDAMBERYELLOWBLUE
9XTLDIL-S
9XTLDIL-UGREENREDAMBERYELLOWBLUEWHITE
LED MULTI VOLTAGE INDICATING LIGHT-
IN STANDARD/BARREL HOUSING
WITH CLUSTER/CHIP LED
in Thermoplastic Housing and Polycarbonate lense
with CLUSTER/CHIP LED and integral circuit
suitable for 24V To 220V AC/DC supply
9XTLDIL-BN
GREENREDAMBERYELLOWBLUEWHITE
LED BARREL INDICATING LIGHT
WITH CLUSTER/CHIP LED AND
INTEGRAL CIRCUIT
in Thermoplastic Housing and Polycarbonate lense
with CLUSTER/CHIP LED and integral circuit
suitable for 220V,110V,48V, 24V, 12V AC/DC supply
NO
NC
NO
NC
CONTACT BLOCKS
REAR CONNECTION
Normally Open (NO)
Normally Closed (NC)
CONTACT BLOCKS
FRONT CONNECTION
Normally Open (NO)
Normally Closed (NC)
T1T2
T3T4
GREENRED
GREENRED
NO
NC
NO
NC
LUMINOUS SELECTOR2/3 POS.
in Thermoplastic Housing and
Polycarbonate lense with
CLUSTER/CHIP LED and
integral circuit suitable for
220V,110V,48V, 24V
AC/DC supply
9XTLD2SLGREENREDAMBERBLUECLEARYELLOW 9XTLD3SL
LUMINOUS BUTTON
SPRING RETURN
in Thermoplastic Housing and Polycarbonate lense
with CLUSTER/CHIP LED and integral circuit
suitable for 220V,110V,48V, 24VAC/DC supply
GREENREDAMBERBLUEWHITEYELLOW
9XTLDLST
9XTLDIL-BN-U
SELECTION CHART
TEKMECTM
CONTROL & SIGNALLING DEVICES Ø22.5MM(METALIC SERIES)
Tekmec Switchgear & Controls(AN ISO 9001:2008 CERTIFIED COMPANY )483, Oberoi Compound, Dilshad Garden Indl. AreaTEKMEC
TM
G. T. Road Delhi- 110095 India.
The widest range PH : 011-43588601 , 9810041895Email: [email protected] Website : www.tekmec.co.in