Small Falling Objects Brochure

29

SHAX® 6098 OPTIONAL SIDE PANEL

Part No. Description Units

12998 Lime Each

pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

SMALL FALLING OBJECTS PREVENTION PROGRAM

SQUIDS TOOL LANYARDS, AERIAL TOOL BELTS, LIFT BUCKETS, TIE HOOKS & GRABBERS

100

10

1

0.10 1 2 3 4 5 6 7 8 9 10

LTI = Lost Time Incident / DAFWC = Days Away From Work Case

Dro

pp

ed

He

igh

t (m

etr

es)

Mass (kg)

FALLING OBJECTS CALCULATOR

“A 1kg spanner dropped from a height of 4 meters will hit the ground traveling at over 30km/h”

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

AUSTRALIA

NEW ZEALAND

SINGAPORE

DANGERS OF SMALL FALLING OBJECTS

FALLING OBJECTS

LARGEFALLING OBJECTS

SMALLFALLING OBJECTS

WORKERFALLS

TOOLS

PPE

PORTABLEEQUIPMENT

MATERIALS& PARTS

DEBRIS

AUSTRALIA NEW ZEALAND SINGAPORE

EMPLOYER OBLIGATIONS

This brochure provides a step-by-step guide to preventing Small Falling Objects with the latest in small falling objects prevention technologies and best industry practice.

Small falling objects pose serious hazards in the workplace. On most workplaces small objects are varied from hand held tools and equipment to small debris. Small objects are high in number and their size makes them hard to control. Even a 1kg spanner dropped from a height of 4 metres will hit the ground travelling over 30km/h.

Controlling the hazards small objects create pose a number of challenges. Without the correct controls, small falling objects can:• Cause injury and death• Damage property• Create tool damage• Damage equipment below• Lost time recovering fallen tools

Studies show that 30% of falling object incidents

arise from mechanical, technical and design

issues, whilst almost 50% occur from human error.

Workplace Safety & Health (2008) statistics show being struck by falling objects is the second most common cause of workplace fatalities in Singapore and a leading cause of workplace injuries.

In a report commissioned by the Ministry of Innovation & Employment, every year in New Zealand around 100 people die from fatal workplace injuries of which people struck by falling objects is a leading cause.

According to the Notified Fatalities Statistics Report 2009-2010, 14% of fatalities in Australian workplaces from 2004-2010 were attributed to objects falling from heights.

Sections 34-38 of the Workplace Health & Safety (WHS) Act 2011, requires employers to minimise risks where reasonably practical to employees. To help Employers comply the WHS legislation, Safe Work Australia in 2012 published the “Falling Objects Fact Sheet” that requires tools and materials to be tethered when working at heights.

According to the publication,Guidelines for the Prevention of Falls to meet the Requirement of the Health Safety in Employment Act 1992, all tools and equipment are to be attached by a cord unless another effective method is used to prevent a falling hazard. AS/NZS 4488 also requires all tools and equipment to be tethered when working at heights.

In the Code of Practice for Working Safely at Height, section 10.2.7.4 stipulates that risks of falling objects must be mitigated, small tools must be secured to the person with the use of a lanyard. The Act also requires employers not to merely follow the law but take reasonable practical steps to proactively reduce risk to Employees.

30

WATCH THE VIDEO

http://bit.ly/1yovxZK

HEIGHT SAFETY

http://bit.ly/1yovxZK

31 pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

RISK CONTROLS

IDENTIFYING HAZARDS

ELIMINATION

SUBSTITUTION

ENGINEERING

ADMINISTRATIONPPE ADMINISTRATIVE

Visit www.pryme.net.au/small-falling-objects to download your Free Educational Tools

TOP CAUSES OF FALLING OBJECTS

Prior to commencing any task that requires working from heights the following steps can help identify potential small falling object hazards.

1. Look for any environmental factors such as wind, rain, drafts, heat etc.

2. Identify sources of energy that can cause falling objects for example gravity, mechanical movement, electrical, pressurised equipment and vibration.

3. Prior to starting work visually inspect the area for preexisting hazards such as debris and loose items.

4. Make sure all safety securing features are in use.5. Look for any collision or snagging hazard with fixtures

and in particular moving or rotating machinery.6. Pay special attention to corroded bolts and brackets.7. Check what controls are in place for example:

scaffolding, toe boards, barriers, netting, etc.8. Inspect all equipment and tools for damage,

attachment points, lanyards, lift buckets, ropes and tool belts.

9. Remove any loose items or equipment.

1. Inadequate risk assessment

2. Human error

3. Inadequate procedures

4. Failed fittings and hazards

5. Poor housekeeping

6. Snaggings & collisions

7. Inadequate repairs & inspections

8. Neglected & home made tools

9. Inadequately stored or secured tools & equipment

Source: Dropped Objects Awareness & Prevention: Reliable Securing. Revision 03. www.dropsonline.org

TO DOWNLOAD EDUCATIONAL TOOLS VISITWWW.PRYME.NET.AU/SMALL-FALLING-OBJECTS

When working at heights, examples to eliminate small falling object hazards include:• Leave any tools and equipment not required for the job at

ground level.• Remove debris from the work area prior to commencing work.• If there is any energy sources in the work area, such as

mechanical rotation, if possible turn them off prior to starting the job.

• If environmental conditions pose a source of danger, such as strong winds, consider rescheduling work.

Hazards can be substituted for ones that pose a lower risk. Examples include:• Consider prefabricating

components at ground level and hoist into place.

• Investigate the possibility of substituting ladders for elevated work platforms.

PPE is only to be used as a last resort to control risks, examples include:• Hard hats and steel

capped boots.• Individual fall arrest

systems, such as harnesses, lifelines, etc. For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011).

There are a number of engineering controls to minimise risks of falling objects, examples include:• Temporary work platforms, perimeter guard rails,

safety mesh, industrial rope access systems, catch platforms, industrial safety nets, toe boards and rails. For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011).

• Tool lanyards and topped containers can also be utilised as engineering controls

When working at heights, administrative controls should be implemented, examples include:• “No Go” areas that prohibit unauthorised people from

entering areas. Permit systems can also be used to restrict access.

• Sequence work to reduce risk, for example so trades are not working above and below each other at the same time.

• Staff training, risk assessment and safe work procedures. For more information

http://WWW.PRYME.NET.AU/SMALL-FALLING-OBJECTS

32pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

WEB TOOL TAIL ELASTIC LOOP TAIL

0.9Kg Max* 4.5Kg Max* 6.8Kg Max*

MODEL NO. PART NO. MODEL

NO. PART NO. MODEL NO.

PART NO.

3700

19703

3703

3703EXT

3713

19767

3703

3703EXT19769

19704

1970519765

19706

Tool Trap

Solution

Tool Trap

Model

Number

Tool Tail Model

(Type)

Tool Diameter

Min/Max (mm) Tool Diameter

Min/Max With Capacity

3723 3703 (Elastic) 16-3816-32mm 0.9kgs

32-38mm 2.3kgs

3724 3703 (Elastic) 38-4532-38mm 2.3kgs

38-45mm 4.5kgs

3726 3703EXT (Elastic) 45-6345mm-57mm 4.5kgs

57mm-63mm 6.8kgs

37503700 (Web)

All Diameters All Diameters0.9kgs

3703 (Elastic) 6.8kgsTAPE TRAP

SHRINK TRAP

OR

Shackle Solution A B C

3790S 19mm 10mm 5mm

3790M 26mm 12mm 5mm

3790L 32mm 16mm 8mm

3790XL 38mm 20mm 10mm

A

C

B

STEP SELECT TAILS & TRAPS

Catalogue all tools and equipment used at heights. For tools and equipment that do not have attachment points, select a tail and trap or a shackle.

SELECT TRAP

SELECT SHACKLE

SELECT TAIL1

2

WHAT TO DO...

3

Select a tail and trap or a shackle.

WEB TOOL TAIL

ELASTIC LOOP TAIL

*Note - Max denotes the maximum weight of the item to tether

TO READ ABOUT SELECTING TAILS VISIThttp://bit.ly/1Dqhoji

http://bit.ly/1Dqhoji

33 pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

ERGODYNE® SQUIDS® 3713 ELASTIC LOOP TOOL TAILS SWIVEL

ERGODYNE® SQUIDS® 3703, 3703EXT ELASTIC LOOP TOOL TAILS

Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails™ can also be used as an anchor point on a belt, harness or separate structure.


19767 3703 Standard 29cm Lime 3 Tails per Pack

19769 3703EXT Extended 46cm Lime 3 Tails per Pack

KEY FEATURES• Stretch cord surrounded by tubular nylon

webbing• Lock stitching at both ends for extra

security• Adjustable barrel lock for tool attachment• Fully enclosed plated O-ring for secure

attachment• Maximum safe working capacity 6.8 kg• Doubles as an anchor loop for belt, harness

or separate structure• Third party tested using a 2:1 safety factor• 6 Per Case

KEY FEATURES• Plated swivelling connection• Doubles as an anchor loop

for belt, harness or separate structure

• Maximum safe working capacity: 4.6 kg

• Third party tested using a 2:1 safety factor

• Stretch cord surrounded by tubular nylon webbing

• Lock stitching at both ends for extra security

• Adjustable barrel lock for tool attachment

• 6 Per Case


19765 Swivel Elastic Loop Tool Tail 3 Tails per Pack

Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails can also be used as an anchor point on belt, harness or separate structure.

PACK OPTIONS

6 packs per Case

PACK OPTIONS

6 packs per Case

INSPECTING TOOL CONNECTORShttp://bit.ly/1D7cVo0

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

NE

RG

ON

OM

ICS

& S

AF

ET

Y P

RO

TE

CT

ION

http://bit.ly/1D7cVo0

34pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

ERGODYNE® SQUIDS® TAPE TRAP

ERGODYNE® SQUIDS® 3700 WEB TOOL TAILS

Web Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 0.90kg using Squids® Tool Traps™.

KEY FEATURES• Ultra strength nylon webbing• Fully enclosed plated D-ring

for secure attachment• High tensile strength nylon

thread• Web catch with double stitch

for more durable stopping point

• Available in five colour coded lengths


• 6 Per Case


19703 Web Tool Tails (9cm) Black 6 Tails per Pack

19704 Web Tool Tails (11.5cm) Orange 6 Tails per Pack

19705 Web Tool Tail (14cm) Black 6 Tails per Pack

19706 Web Tool Tails (16.5cm) Orange 6 Tails per Pack

19708 Web Tool Tails (21.5cm) Black 6 Tails per Pack

Tape Traps capture Squids® Elastic Tool Tails™ creating a retrofit connection point for tethering.

KEY FEATURES• Non-silicone based makeup works well in a variety of applications• No adhesives so it can be replaced without a mess• Sealed and set with heat application to finish application and secure• Cut and puncture resistant compared to other tool tapes• Material content and finish provides added grip to the handle of a tool• Maximum safe working capacity: 6.8 kg depending on length, tool, tail

and lanyard used• 6 Per Case


19760 3705S - Tape Trap 3.65m Roll Each

19761 3705M - Tape Trap 9.14m Roll Each

MEASURE IT WRAP IT HEAT IT LAY IT DOWN TETHER IT

USING SQUIDS® TAPE TRAPS

PACK OPTIONS

6 packs per Case

PACK OPTIONS

6 per Case

WATCH THE VIDEO

http://bit.ly/1yX6fr1

TAPE TRAPS

http://bit.ly/1yX6fr1

ERGODYNE® SQUIDS® 3780S 3780L POWER TOOL TRAP

ERGODYNE® SQUIDS® 3770 TAPE MEASURE TRAP

35 pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

Power Tool Trap securely wraps around the battery portion of drills, impact drivers and other cordless power tools. D-Ring connection point attaches to a lanyard to prevent drops.

KEY FEATURES• 1000D nylon with water

resistant backing• Two hook and loop straps

secure battery boot to drill battery for safe and easy tethering

• Nickel-plated cast iron D-Ring• Maximum safe working

capacity: 6 lbs. (2.7 kg)• Third party tested using a 2:1

safety factor• Large - Will fit cordless power

tool batteries up to: 5”L x 3.5”W x 3.5”H (12.5cm x 9cm x 9cm)

• Small - Will fit cordless power tool batteries up to: 3.5”L x 2.75”W x 2.5”H (9cm x 7cm x 6.5cm)


19782 3780S - Black Each

19784 3780L - Black Each

PACK OPTIONS

6 per Case

Tape Measure Trap securely wraps around most standard tape measures. D-Ring connection point attaches to a lanyard to prevent drops.

KEY FEATURES• 1200D and 600D polyester main

material• Hook and loop straps secure tape

measure inside trap for safe and easy tethering

• Zinc-plated cast alloy D-Ring• Maximum safe working capacity: 2

lbs. (0.9 kg)• Third party tested using a 2:1 safety

factor


19770 Orange Each

PACK OPTIONS

6 per Case

WATCH THE VIDEO

http://bit.ly/1GJrOuk

3780 TRAP

WATCH THE VIDEO

http://bit.ly/1BSGuLT

3770 TRAP

http://bit.ly/1GJrOuk

36pry

me.n

et.

au

ERGODYNE® SQUIDS® TOOL SHACKLES

ERGODYNE® SQUIDS® 3723, 3724, 3726 SHRINK TOOL TRAP

KEY FEATURES• 19723 Fits tool diameter range

16mm - 32mm• 19724 Fits tool diameter range

32mm - 45mm• 19725 Fits tool diameter 45mm - 63mm• Cold Shrink technology from

3M requires no heat source• No additional tools needed to

ensure a secure connection on tool

• EPDM rubber material resists acids, alkalies and extreme temps

• Patent Pending application is the quickest and easiest way to create an attachment point

• Maximum safe working capacity: 6.8kg depending on tool, tail and lanyard used


Cold Shrink Traps capture Squids® Elastic Tool Tails™ creating a retrofit connection point for tethering.


19723 Shrink Tool Trap 2.3kg Each



PULL CORD TO ATTACH

SHRINK TRAP TO TOOL &

TAIL

KEY FEATURES• Stainless steel (#304) material is corrosion resistant• One step retrofit attachment for temporary or permanent connection

point• Connects around midsection of a waisted tool• Connects through eye of a captive tool to create a more accessible

tethering point• Secure by adding a drop of adhesive and tightening with wrench or pliers• Maximum safe working capacity:

6.8 kg depending on model, tool and lanyard used• 24 Per Case


19792 Small Each

19793 Medium Each

19794 Large Each

19795 Extra Large Each

PACK OPTIONS

6 per Case

PACK OPTIONS

6 per Case

Stainless steel U shaped shackles connect to waisted tools (tapered mid sections) or tools with captive holes, creating clean, secure attachment points for tethering.

WATCH THE VIDEO

http://bit.ly/1uVp0LA

SHRINK TRAP

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

http://bit.ly/1uVp0LA

37 pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

ERGODYNE® SQUIDS® 3115 WRIST TOOL LANYARD

ERGODYNE® SQUIDS® 3100, 3100EXT SINGLE CARABINER



security• Aluminium carabiner• Adjustable barrel lock for tool attachment• Maximum safe working capacity: 4.6 kg• Standard 89cm-107cm• Extended 107cm-137cm

Tool Lanyard-Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.


19003 Lime Each

19013 Lime - Extended Each

KEY FEATURES• Polyester webbing cuff secures to wrist• Ribbed pull cord• Adjustable barrel lock for tool attachment• Maximum safe working capacity: 0.9 kg• Tether length 19cm• Wrist Measurement: S/M 13cm – 18cm• Wrist Measurement: L/XL 18cm – 22cm• Black• 6 Per case

Wrist Tool Lanyard: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.


19042 Small/Medium Each

19052 Large/X-Large Each

PACK OPTIONS

6 per Case

PACK OPTIONS

6 per Case

Identify hazards in your at heights environment. Select lanyards to tether all loose tools, equipment & hoist buckets to minimise hazards identified in the risk assessment.

WHAT TO DO...STEP SELECT LANYARDS

LANYARD FEATURE

LANYARD MODEL NUMBER

3000 3001 3115 3104 3102 3100 3108 3111 3311 3119

Weight Max (kg) 0.46 0.9 0.9 2.0 2.3 4.6 4.6 6.8 6.8 9.0

Minimise Tangle & Twist Hazard

(Ideal for small tools & equipment)

Detachable X X X

Retractable X X

Swivel X X X X

Minimise Marring Hazard Single Loop X X X X X X

Minimise Sparking & Marring Dual Loop X

Extra Secure Connection - Corrosive Environment

Locking Carabiner X X X

Screw Gate X X X X X

Most Secure Connection - Corrosive Environment

Dual Leg X

Triple Locking X

WATCH THE VIDEO

http://bit.ly/1EMX6lj

TOOL LANYARDS

http://bit.ly/1EMX6lj

38pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

ERGODYNE® SQUIDS® 3130S 3130M COILED CABLE LANYARD

ERGODYNE® SQUIDS® 3119, 3119EXT TRIPLE-LOCKING DUAL CARABINER

KEY FEATURES• Stretch cord surrounded by tubular nylon webbing• Lock stitching at both ends for extra security• Heavy-duty (8KN) triple-locking carabiner• Carabiner features 360 degree swivel captive-eye• Adjustable barrel lock for tool attachment• Maximum safe working capacity: 9.0 kg• Standard 89cm-107cm• Extended 107cm-137cm

Tethers tools to help workers prevent injury, damage and lost productivity from dropped tools. Swiveling triple locking carabiners

provide secure connection and prevent twisting and tangling

while performing job.

KG LOAD9LIMIT


19029 Lime Each


KEY FEATURES• Coil design reduces lanyard length and prevents

snag and tangle hazards• Constructed with PU covered aircraft cable for

ultimate strength and durability• Stainless steel carabiners (#304) for corrosion

resistance• Swiveling design prevents tangles and

aggressive recoil• Small – Coiled Length (16.5 cm), Extended

Length (127cm)• Small – Max safe capacity (0.9kg)• Medium – Coiled Length (18cm), Extended

Length (129cm)• Medium – Max safe capacity (2.26 kg)


19130 (S) Lime - 0.9Kg Each

19131 (M) Orange - 2.26Kg Each

PACK OPTIONS

6 per Case

PACK OPTIONS

6 per Case

NOW WITH SWIVEL!

39 pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

ERGODYNE® SQUIDS® 3102, 3102EXT DETACHABLE SINGLE CARABINER

ERGODYNE® SQUIDS® 3104 DETACHABLE DUAL LOOP

ERGODYNE® SQUIDS® 3108 LOCKING SINGLE CARABINER

Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.


webbing• Lock stitching at both ends for extra security• Heavy-duty (500kgf) self-locking carabiner• Adjustable barrel lock for tool attachment• Maximum safe working capacity: 4.6 kg• Standard: 71cm - 89cm• 6 Per Case


19008 Lime Each

Non-conductive and non-marring. Dual loop, interchangeable design eliminates all metal from lanyard. Great for working on or around sensitive surfaces or electrical applications.


webbing• Lock stitching at both ends for extra security• Truly non-conductive with dual loop design• Perfect for scratch and damage sensitive surface

work as non-marring option• Adjustable barrel lock for tool attachment• Modular quick connecting buckle for exchanging

multiple tools• Maximum safe working capacity: 2.26 kg• Standard 89cm-107cm


19104 Lime Each

Tool Lanyard - Detachable/Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools. Compatible with #3103 Lanyard Loop.


webbing• Lock stitching at both ends for extra security• Aluminium carabiner• Adjustable barrel lock for tool attachment• Quick connect buckle• Compatible with 3103: Detachable Lanyard

Loops• Maximum safe working capacity: 2.26 kg• Standard 89cm-107cm • Extended 107cm-137cm• 6 Per Case


19063 Lime Each

19073 Lime-Extended Each

PACK OPTIONS

6 per Case

PACK OPTIONS

6 per Case

PACK OPTIONS

6 per Case

40pry

me.n

et.

au

PR

YM

E P

RIC

E L

IST

- A

US

TR

ALIA

40pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

ERGODYNE® SQUIDS® 3155 CLAMP HARD HAT LANYARD

ERGODYNE® SQUIDS® 3111, 3111EXT STAINLESS DUAL CARABINER

ERGODYNE® SQUIDS® 3311 TWIN LEG STAINLESS TRIPLE CARABINER



security• Twin leg for connecting multiple tools or

having 100% tie-off of single tool• Stainless steel carabiners (#304) for

corrosion resistance• Maximum safe working capacity: 6.8 kg• Captive eye carabiner with screwgate for

locking connection• Standard 89cm-107cm• 6 Per Case

Twin Leg Triple Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments. Dual leg for multipleconnections.


19083 Lime Each


webbing• Lock stitching at both ends for extra security• Stainless steel carabiners for corrosion resistance• Screwgate on carabiner for locking connection• Maximum safe working capacity: 6.8 kg• Standard 89cm-107cm• Extended 107cm-137cm• 6 Per Case

Stainless Steel Screw Gate Tool Lanyard - Dual Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments.


19027 Lime Each


Clamp Hard Hat Lanyard: Easily and comfortably secures a hard hat to a worker to prevent the item from falling.

KEY FEATURES• Comfortably attaches to hard hats and other headwear• Easy release clamp attaches securely to just about

anything• Comfortable high stretch elastic material• Hi-Vis Lime• 6 Per Case


19155 Lime Each

PACK OPTIONS

6 per Case

PACK OPTIONS

6 per Case

PACK OPTIONS

6 per Case

41 pry

me.n

et.

au

PR

YM

E P

RIC

E L

IST

- A

US

TR

ALIA

41 pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

NE

RG

ON

OM

ICS

& S

AF

ET

Y P

RO

TE

CT

ION

ERGODYNE® SQUIDS® 3158 COLIED HARD HAT LANYARD WITH CLAMP

Coil Hard Hat Lanyard with Clamp: Easily and comfortably secures a hard hat to a worker to prevent the item from falling. Coil design reduces lanyard length and prevents snag and tangle hazards.

KEY FEATURES• Coil design reduces lanyard length and prevents

snag and tangle hazards• Easy release clamp attaches securely to just

about anything• Easy release clamp attaches securely to just

about anything• Maximum safe working capacity: 2 lbs. (0.9 kg)• Third party tested using a 2:1 safety factor


19159 Lime Each

PACK OPTIONS

6 per Case

Tethers hard hats to help workers prevent injury, damage and

lost productivity from dropped objects. Coiled lanyards provide

secure connections reduced length and help avoid tangling and snagging while performing

jobs.

WATCH THE VIDEO

http://bit.ly/1ROuk8X

3158 COILED LANYARD

http://bit.ly/1ROuk8X

42pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

ERGODYNE® SQUIDS® 3000 RETRACTABLE DUAL CARABINER & 3001 SINGLE CARABINER W/LOOP END

ERGODYNE® SQUIDS® 3025, 3026 RETRACTABLE ACCESSORIES

Retractable tool lanyard attachments for quick exchange of multiple tools.

KEY FEATURES• Compatible with

Retractable lanyards 3000 and 3001

• Modular quick connecting buckle for exchanging multiple tools

• 6 Per Case


19325 Compatible with 3000 Retractable Lanyards 3 Attachments Per Pack

19326 Compatible with 3001 Retractable Lanyards 3 Attachments Per Pack

3000 CARABINER

KEY FEATURES• Self-setting pawls set desired lanyard length up to 122cm• ABS thermoplastic housing for ultimate durability• Nickel-plated swivelling top ring for 360 degree rotation• Stainless steel carabiners (#304) for corrosion resistance• Technora cord for ultimate strength and durability• Modular quick connecting buckle for exchanging multiple tools• Adjustable barrel lock for tool attachment• 3000 Carabiner - Maximum safe working capacity: 0.46 kg• 3001 Loop - Maximum safe working capacity: 0.9kg• Patented design• 6 Per Case

3001 LOOP

Retractable tool lanyard with stainless steel carabiner attachment. Locks into place at desired length preventing tangles and work under tension while securing tools.


19300 Carabiner Each

19301 Loop Each

3025 CARABINER

PACK OPTIONS

6 per Case

PACK OPTIONS

6 Packs per Case

WATCH THE VIDEO

http://bit.ly/1zmbwdn

RETRACTABLES

3026 LOOP

http://bit.ly/1zmbwdn

43 pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

ERGODYNE® ARSENAL® 5518 19-POCKET AERIAL TOOL POUCH - LOOP DESIGN

ERGODYNE® ARSENAL® 5516 16-POCKET AERIAL TOOL POUCH

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

KEY FEATURES• 1680D Ballistic Nylon• 16 pockets for tools and fasteners• Top cover flap with buckle closure • Three nickel-plated D-rings for tool lanyard

attachment• Patented Storm Drains™• Abrasion-resistant PVC-reinforced pouch bases• Maximum safe working capacity: 15 kg


13640 Grey Each

KEY FEATURES• 1680D Ballistic Nylon• Top cover flap with hook and loop closure• Four Nickel-plated D-rings for tool lanyard

attachment• Patented Storm Drains™• Abrasion-resistant PVC-reinforced pouch bases• Maximum safe working capacity: 15 kg

Aerial Tool Pouch/Loop Design: Easily attaches to any belt while keeping tools and fasteners secure.


13642 Grey Each

PACK OPTIONS

10 per Case

PACK OPTIONS

10 per Case

ERGODYNE® ARSENAL® 5550, 5555 3” & 5” TOOL BELTS

KEY FEATURES• Thick, vented foam padding for comfort• Nickel-plated 2” double tongue metal roller buckle• Nickel-plated grommets set firmly for durability• Nickel-plated suspender anchors• 3” & 5” options


13653 Black L 3” Each

13654 Black XL 3” Each

13655 Black 2XL 3” Each

13656 Black M 5” Each

13657 Black L 5” Each

13658 Black XL 5” Each

13659 Black 2XL 5” Each

Comfortable, padded tool belt for easy rig support.

44pry

me.n

et.

au

PR

YM

E P

RIC

E L

IST

- A

US

TR

ALIA

ERGODYNE® SQUIDS® 3175 ACCESSORY ANCHOR

ERGODYNE® ARSENAL® 5740T LEATHER BOTTOMBUCKET-SWIVEL WITH TOP

Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.

KEY FEATURES• Heavy-duty 45mm Tetoron webbing

strap• Nickel-plated iron D-Ring• Black 840D Nylon sleeve material• Heavy-gauge, contrasting color stitching• Maximum safe working capacity: 181 kg• Not for climbing or fall arrest• 6 Per Case


19175 Lime Each

44pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

KEY FEATURES• Canvas• Leather reinforced base• Moulded plastic top ring• Interior pocket• Heavy-gauge nylon stitching• Nickel-plated swivel clip• PP rope handle• Maximum safe working capacity: 68 kg• Diameter 32cm, height 43cm• Patented safety top included


14540 White Each

PACK OPTIONS

6 per Case

Model Diameter (cm) Height (cm) Litres Interior Pockets Max Working

5740 32 43 34.2 1 68kg

5742 25 71 36.0 2 56kgs

5746 32 33 30.2 15 34kgs

1.

2. 3.

WHAT TO DO...STEP SELECT HOIST BUCKETS, ACCESSORY ANCHOR & TOOL BELTS

SELECT HOIST BUCKETS1

Leather Bottom Bucket w/ Snap: High wall, heavy duty bucket for strength and durability. Included detachable safety top.

SELECT TOOL BELT & BAG2 SELECT ACCESSORY ANCHORS3

Model Length (cm) Max Working KG

3175 60 181

Model 5516 5518

Pockets 16 19

D-rings 3 4

Select the 5728 bolt bag for

small parts

Select hoist buckets by identifying heavy equipment, parts, debris, materials required to be secured and/or hoisted. Select tool belt & bag for smaller items carried by the worker. Select accessory anchors to create attachment points .

PACK OPTIONS

6 per Case

LIFT BUCKET TESTING REPORThttp://bit.ly/1KlBWMh

http://bit.ly/1KlBWMh

45 pry

me.n

et.

auPart No. Description Units

19175 Lime Each

ERGODYNE® ARSENAL® 5742T TALL LEATHER BOTTOM BUCKET-SWIVEL WITH TOP

ERGODYNE® ARSENAL® 5728 TALL SAFETY BOLT BAG

ERGODYNE® ARSENAL® 5746 TAPERED PLASTIC BOTTOM BUCKET-SWIVEL

KEY FEATURES• Canvas• Moulded plastic base• Moulded plastic top ring• 15 interior pockets• Heavy-gauge nylon stitching• Nickel-plated swivel clip• PP rope handle• Maximum safe working capacity: 34kg• Wide mouth for easy loading• Diameter 32cm, height 33cm


14446 White Each

Tapered Plastic Bottom Bucket: Wide top for easy access to bucket contents. Rope Handle

Tall Safety Bolt Bag with Loop Design: Wide body and one-handed cinch-up top for keeping gear safe and secure.

KEY FEATURES• Canvas• Patented one-handed closure for safety and security• Nickel-plated rivets• 6- and 12-ply nylon stitching• Patented nickel-plated storm drain• 2 Exterior tool loops• Maximum safe working capacity: 12 Kg• 25cm x 13cm x 33cm


14428 White Each

Tall Leather Bottom Bucket: High wall, heavy duty bucket. Tall design holds longer equipment. Rope handle with swivel snap. Safety top included.

KEY FEATURES• Canvas• Leather reinforced base• Moulded plastic top ring• PP rope handle• 2 interior pockets for

organization• Nickel-plated swivel clip

• Heavy-gauge nylon stitching

• Maximum safe working capacity: 56 kg

• Diameter 25cm, height 71cm

• Patented safety top included


14542 White Each

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

Model Length (cm) Max Working KG

3175 60 181

PACK OPTIONS

6 per Case

WATCH THE VIDEO

http://bit.ly/1tiNUnj

BOLT BAG

PACK OPTIONS

6 per Case

PACK OPTIONS

6 per Case

http://bit.ly/1tiNUnj

ERGODYNE® ARSENAL® 5528 5538 TOPPED PARTS POUCHES

46pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

5938 TARPAULIN

Topped Parts Pouch has a hands-free, self-closing trap door closure that prevents small parts, hardware, and tools from falling when working at heights.

KEY FEATURES• Waterproof tarpaulin material / 20 oz. water resistant

canvas• Trap door closure for safety and security• Patented nickel-plated storm drain• 2 exterior nickel-plated D-rings for tool landyard

attachment• 2 exterior tool loops• Maximum safe working capacity: 20 lbs. (9.0 kg)• 7.5”L x 7.5”W x 12”H (19cm x 19cm x 30cm)


13628 Black Canvas Each

13638 Orange Tarpaulin Each

PACK OPTIONS

6 per Case

WATCH THE VIDEO

http://bit.ly/1Jmvne6

PARTS POUCHES

5928 CANVAS

http://bit.ly/1Jmvne6

ERGODYNE SQUIDS 3400MD METAL DETECTABLE GRABBERS

47 pry

me.n

et.

au

PR

YM

E P

RIC

E L

IST

- A

US

TR

ALIA

ERGODYNE® ARSENAL® 5920 5925 MAGNETIC TRAY ORGANISERS

47 pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

5920

5925


13628 Black Canvas Each

13638 Orange Tarpaulin Each

Small parts trays are convenient for controlling and organizing screws, nuts, bolts, drill bits and other ferromagnetic objects.

KEY FEATURES• Corrosion resistant, durable stainless steel #430• Trays keep small ferromagnetic components at any

angle• Magnetic on base for attachment to tool box, tower or

other structure• 5.5” x 9.5”x 1.1” (14cm x 24cm x 3cm) - Rectangle• Diameter 6”, Depth 1.1” (14cm x 3cm) - Round


14920 Rectangle Each

14925 Round Compact Each

PACK OPTIONS

6 per Case

These Grabbers not only help prevent dropped objects, they also signal metal detectors in food processing to prevent them from becoming harmful foreign objects themselves. The patented Grabbers keep your gloves, rags, keys and whatever else always seems to become a mysteriously lost object close at hand. The versatile dual clip version can be used as one unit or detached, clipped to d-rings and used as two separate pieces.

WATCH THE VIDEO

http://bit.ly/1NuFhLq

MAGNETIC TRAYS

KEY FEATURES• Clips to clothing, belts, tool belts, and D-rings• Detachable, usable with ‘biners, D-rings, etc.• Metal detectable material alerts staff if product has

become a foreign object• Impregnated with metallic powder making entire

product detectable• Deep blue color signals metal detectability• Breakaway feature, Patented Design


19132 Dark Blue Each

PACK OPTIONS

6 per Case

http://bit.ly/1NuFhLq

48pry

me.n

et.

au

PR

YM

E P

RIC

E L

IST

- A

US

TR

ALIA

ERGODYNE® SQUIDS® 3510, 3530, 3540 TIE HOOK

ERGODYNE® SQUIDS® 3400 GRABBER


19112 Black Each

19117 Blue Each

19118 Hi-Vis Orange Each

19119 Hi-Vis Lime Each

Grabber: Keep gloves and other items handy. Clips to almost anything. Patented.

KEY FEATURES• Clips to clothing, belts, tool belts, and D-rings• Detachable, usable with ‘beeners, D-rings, etc.• Breakaway feature• Dielectric / non-conductive material• Durable, ultra-resilient acetal copolymer• Patented design• 6 Per case

48pry

me.n

et.

au

ER

GO

NO

MIC

S &

SA

FE

TY

PR

OT

EC

TIO

N

3510 35403530

Part No. Description Recommended Load Limit Units

33102 Small Hook 30cm 10kg Each



33302 Large Hook 30cm 10kg Each



33402 Large Locking Hook 30cm 20kg Each



KEY FEATURES• Reusable sliding belt lock

mechanism• High tensile strength,

weather resistant Nylon 66

• Hi vis orange color• Excellent resistance to oil,

salt, solvents, and alkali• Temp range: -40°C - 80°C• Patented design• 6 Per case

Tie Hook: Super duty, reusable tie hook for organizing and cinching hoses, cords, pipe and almost anything else.

PACK OPTIONS

300 Per Shipper

PACK OPTIONS

6 per Case

WATCH THE VIDEO

http://bit.ly/1DcQyez

TIE HOOKS

http://bit.ly/1DcQyez

Documents

Small Falling Objects Brochure