Embed Size (px)
Citation preview
SlickSliding door systems
US
: 02
Certificate from ift Rosenheim
Fittings for sliding doors in
accordance with DIN EN 1527 : 1998
(comparable ANSI-Standard grade 1)
The testing institute ift Rosenheim has success-fully tested our ABP-Beyerle sliding door systems for glass or wooden doors.
The assessment tests apply for the systems (track: stainless steel tube, AISI304)Flatec IV (Slick 1), Flatec V (Slick 2) and Plano (Slick 3)
Duration of functional ability: 100,000 cycles
Maximum door weight: 100 kg, (220 lbs)
Corrosion resistance: 240 h salt spray fog test in accordance with EN 1670
Initial friction:
less than or equal to 40 N
with a 100 kg (220 lbs) door.
Effective 22 N = ADA compliant
Model, program, technical modifications, information and errors are excepted. The right to make design or specification changes is reserved at any time.
Certification
Sliding door systems made from stainless steel
Sliding doors made from glass and wood are fascinating and lend rooms a special flair. Visible technology and high-grade
craftsmanship set new accents in room design. All products are characterised by their solid construction, easy use and quiet
movement. There are different designs of hardware available to satisfy your designing needs.
Yo
of door and flush handles. Please refer to www.beyerle-us.com
: 03
Sets for glass doors
Complete sets, standard model t = 5/16" - 1/2"
1/8", consisting of:
"
length: see table
1 Installation instructions
inch inch
7/8" 1/2" - 35 7/16"
-2100EF 82 11/16" 35 13/16" 3/8"
" 3/4" - 44 1/16"
-2540EF 100" 44 1/2" 3/16"
! 17/32"
The maximum door weight is 100 kg (220 lbs)
For baseboards and trimmings, order spacer (stainless
installation instructions at www.ambaproducts.com
Special lengths for guide rails, other individual components
and accessories. (refer to [email protected])
Minimum order quantities -10 sets
4"
9 3/16"
2 3/16"
2 3/16"
Sets for wooden doors
: 04
4"
2 3/16"
2 3/16"
9 3/16"
Complete sets, standard model t up to 1 3/4"
“, consisting of:
"
length: see table
1 Installation instructions
inch inch
7/8" 1/2" - 35 7/16"
11/16" 35 13/16" 3/8"
" 3/4" - 44 1/16"
" 44 1/2" 3/16"
! 13/32"
The maximum door weight is 100 kg (220 lbs)
For baseboards and trimmings, order spacer (stainless
installation instructions at www.ambaproducts.com
Special lengths for guide rails, other individual components
and accessories. (refer to [email protected])
Minimum order quantities -10 sets
: 05
Sets for wooden doors
Complete-sets, standard model t = 1 7/16" - 1 3/4"
no height adjustment, consisting of:
"
length: see table
1 Installation instructions
inch inch
7/8" 1/2" - 35 7/16"
11/16" 35 13/16" 3/8"
" 3/4" - 44 1/16"
" 44 1/2" 3/16"
! The maximum door weight is 100 kg (220 lbs)
For baseboards and trimmings, order spacer (stainless
installation instructions at www.ambaproducts.com
Special lengths for guide rails, other individual components
and accessories. (refer to [email protected])
Minimum order quantities -10 sets
4"
4"
9/16" 9/16"3 9/16"
1 3/16"1/4"
: 06
Sets for glass doors
Complete-sets, standard model t = 5/16" - 1/2"
no height adjustment, consisting of:
"
length: see table
1 Installation instructions
inch inch
7/8" 1/2" - 35 7/16"
-2100EF 82 11/16" 35 13/16" 3/8"
" 3/4" - 44 1/16"
-2540EF 100" 44 1/2" 3/16"
! "
The maximum door weight is 100 kg (220 lbs)
For baseboards and trimmings, order spacer (stainless
installation instructions at www.ambaproducts.com
Special lengths for guide rails, other individual components
and accessories. (refer to [email protected])
Minimum order quantities -10 sets
4"
9 3/16"
2 3/16"
2 3/16"
: 07
Door and flush handles
Art. No. d D GB
E 2" 5/16" " 5/8"
1 flush handle for glass and wood doors,
provided with self-adhesive ring for mounting
"
!
Art. No. d D GB
0-4EF 2 3/8" 5/8" 15/16" "
1 flush handle for glass and wood doors,
provided with self-adhesive ring for mounting
"
satin stainless steel (AISI 303)
!
: Flush handle - Diskus
Art. No. Art. No. L c/c
Single handle Pair handle
For glass doors
13/16" 8 1/4"
For wood doors
13/16" 8 1/4"
3/4"
",
tube thickness t = 5/64", satin stainless steel (AISI 304),
7/8", satin stainless steel (AISI 303), solid
! "
1/2"
"
c/cL
D
DH
ø
d
D9/64”
23/64”
ø
5/16“
3/16"
**
3/4"
3/16"
**
3/4"
USU
94-9
7 I F
LY_ U
S I 0
8.2
011
For glass and wood door drawings refer to www.ambaproducts.com (See planning guide page 5 of each item)Model, program, technical modifications, information and errors are excepted. The right to make design or specification changes is reserved at any time.
www.abp-beyerle.de
Standard installation glass
5/16"-18UNC 5/16"-18UNC
5/16"-18UNC5/16"-18UNC
1 3/16" 1 3/4"
1 15/16"
13/16"1/4"
max.
1 3/4"
max.
1 3/4"
13/16" 1 3/8"
3/16"
1 3/4"
1 3/8"
3/4" 1 5/16"2 5/16"
3/4"
1/4" 1/4"5/16"7/16"1/2"
7/8"1"
1 1/16"
Installation with baseboards and trim glass
Installation with baseboards and trim wood
Standard installation wood
1294 Logan Circle NW
Atlanta, GA 30318, USA
Phone: (404) 350-9738
Fax: (404) 355-0166
www.ambaproducts.com
Distributed in North America and Canada
** Spacersorder separately!
** Spacersorder separately!
USO226-19EF 3/4"
Art.-No. inches
USO226-33EF 1 5/16"
Art.-No. inches
G
(2 3/8")
(1/2")(3/8")
(5/16")
(1/2")(3/8")
(5/16")
G
(2 3/8")
G
(2 3/8")
G
(2 3/8")
