Sixteen - Agrimoll Molle per L'Agricoltura · 2016. 3. 31. · COA Company. 3 COA Company ... 2016. 5 2400 2400 2400 2400 2400 Edge protection EE ROECO NEW Temporary Border Protection

S i x t e e n

2

CO

MP

AN

Y

Company

3

CO

MP

AN

Y

Company

In the following pages we present our range of products for security and safety on building and construction sites, on roads, and in the private and industrial sectors.

Some of the pages are dedicated to our production of specialized welded wire mesh.

emanuele pacetti

Bestsider uses Kuka and Hyundai robotics.

4

2400

2400

Edge protection

EDG

E PR

OTE

CTI

ON

size: 2400x1100 mm.finish: Epoxy powder coated RAL 1004 yellow.Kg 15.50 Pz. 50.

size: 2400x1100 mm.finish: galvanised Kg 15.20 Pz. 50.

• Panels are overlying by 100 mm. on a 2400 mm length• In one operation 2400 mm. length is installed• The panels can also be installed one above the other in the vertical, up to a maximum height of 1900 mm.

Custom colors on request.Your Protection can be customised with a 100x260 mm plate.

Temporary Border Protection System PATENT PENDING MI2015B000153According to EN 13374 – A, B e C with attestation.

Art. 2611/V

Art. 2611/Z

The longitudinal side of the upper panel is made of double wire for maximum resistance to bending.

The longitudinal side of the base is made by a shaped metal plate h 250 mm to protect from accidental fall of small equipment and materials.

NEW2016

5

24002400

24002400

2400

2400

Edge protection

EDG

E PR

OTE

CTI

ON

NEW2016Temporary Border Protection System

– new coupling systemPATENT PENDING MI2015B000153According to EN 13374 – A, B e C with attestation.

Art. 2621003

We have designed and patented an innovative system for coupling the panel onto the post.By simply opening and closing the top coupling system, your Temporary Border Protection System is deployed.The section is 2400 mm long; fewer posts, lower costs.

No more wooden panels of uncertain certification.

Each element of our system is certified to comply with the workplace safety standards in force.

In addition to standard sizes, we produce posts up to a maximum height of 1900 mm.

Art. 2621002

Art. 2621001

6

CO

NFO

RM

ITY

Conformity

Our mobile fencing systems are produced in compliance with the EEC 89/106 directive, whit the Italian Decree 494, dated 14 August 1996 and its modifications, as well as to the Italian Decree 528, dated 18 November 1999, that establishes construction site and general workplace Health & Safety Regulations.

Finished products that are marked with www.bestsider.eu can be traced from production to the worksite.

To give our customers the necessary documentation for safety plans, every job order comes with Instructions for Use and Technical Information for the correct use of our Fencing Systems, in addition to proof of Conformity, certified by one of the most renowned engineering studios.

All our Fencing Systems have been certified as Conforming since 13

October 2013

7

BA C D

MO

BI

LE

Mobile fencing

We produce mobile fencing panels consisting of 38-40 mm through to 42 mm vertical tubes with a thickness of between 9/10 mm - 12/10 mm and 27-42 mm horizontal tubes with a thickness of between 9/10 mm - 12/10 mm holding together 90x300 mm, 100x250 mm, 37x300 mm. or 37x150 mm welded wire mesh (2.20 mm to 4.00 mm diameter galvanised wire).Our panels can be made up with mesh welded at each intersection (flush) or welded on the top of the tube (barbed) according to the most recent market demands. (2012 EU guidelines).

Mobile fencing

Titan structural reinforcement.We present mobile fencing “Titan” structural reinforcement.

The tensile tests made confirm that this accessory considerably increases the angle of the panels’ breaking load.

It can be applied to all models. It can be applied to 2 or 4 corners.

Titan structural reinforcementPATENT PENDING MI2014U000320 FR1559908 DE202015105483.1

8

MO

BI

LE

Mobile fencing

Anticrisis mobile system

Base mobile system

The BASE/B model – also known as ANTICRISIS – is considered to be the most economical in the category of Mobile Fencing for building sites.

panel size: 2000x3530 mmwire diameter: 3.00 mm horizontal 2.20 mm verticalmesh size: 100x250 mmtube diameter: 38 mm vertical - 27 mm horizontalfinish: galvanised tube & wire Kg 11.90 Pcs 40

The BASE panel is made for maximum compatibility with all our other mobile fencing systems, both 2 and 4 tube.


Art. 001/B

Art. 001

Road mobile system It is useful when fencing has to be erected quickly to dig sewers, telephone lines, drains and electrical lines.


Art. 013

Availablewith reinforcement TITAN



9

MO

BI

LE

Mobile fencing

EU 2 mobile system - 3 horizontal tube Art. 115

Heavy Plus mobile system The HEAVY PLUS has 42 mm diameter tubes, both horizontal and vertical.


Heavy mobile system The HEAVY panels, as opposed to the BASE panels, are framed in 40 mm diameter horizontal and vertical tubes. Both horizontal and vertical.


Art. 006

Art. 022

The BASE 3 HORIZONTAL TUBE - EU 2 combines the low cost of the BASE panel fence with maximum resistance obtained from the horizontal tube positio-ned in the centre of the panel.





10

MO

BI

LE

Mobile fencing

High Visibility mobile systemThe HIGH VISIBILITY panel comes with a 200x3500 mm, RAL 2004 orange band which conforms to DPR (Italian Presidential Decree) 495 art. 32 of 16 December 1999.


Export - EU 1/B mobile system The characteristic of the EXPORT- EU1/B model is that it is barbed at the top and at the bottom of the tube.1.10 mm thick tubular frame (vertical and horizontal).


Art. 212/B

Art. 075



Art. 028/T

Mobile System “Titan”New concept mobile fence.It combines the strength of the structure perimeter to the TITAN Reinforcement, placed in the intersections of the tubes at the base of the panel. To join the panels the coupler is always requested.

panel size: 2000x3530 mmwire diameter: 3.00 mm horizontal 2.20 mm verticalmesh size: 50x250 mmtube diameter: perimeter curved 38 mm. - horizontal base 38 mm.finish: galvanised tube & wire Kg 14.20 Pcs 40

11

MO

BI

LE

Mobile fencing

Anticlimb Strong - EU 4 mobile systemThe ANTICLIMB STRONG - EU 4 panel uses 37x150 mm welded wire mesh.


Art. 203

Anticlimb - EU 5 mobile system 3 vertical tube

In the ANTICLIMB 3 VERTICAL TUBE - EU 5 model, a 27 mm diameter vertical tube improves the rigidity of the basic anticlimb design.

panel size: 2000x3530 mmwire diameter: 3.20 mm horizontal 3.20 mm verticalmesh size: 37x300 mmtube diameter: 42 mm vertical - 27 mm horizontal (spessori 1.10 mm)finish: galvanised tube & wire Kg 24.50 Pcs 35

Art. 210



Anticlimb - EU 3 mobile systemThe ANTICLIMB - EU 3 panel is used to fence off sites where maximum security is a necessity (anti-climb fencing).

panel size: 2000x3530 mmwire diameter: 3.20 mm horizontal 3.20 mm verticalmesh size: 37x300 mmtube diameter: 42 mm vertical - 27 mm horizontal (spessori 1.10 mm)finish: galvanised tube & wire Kg 21.00 Pcs 35

Art. 202


12

AC

CES

SO

RIE

S

Accessories

2000x2200 gate or connecting panelThe correct way for machinery and construction site workers to access the site is by one of two different gates; the 2000x2200 mm gate or the 2000x1200 mm gate. For unusual needs, two side-by-side 2000x2200 mm gates give an opening of 4400 mm The use of our gate hinge set kit is vital. This type of gate is also used as a connecting panel.

Art. 002

2000x1200 gate or connecting panelUsed when pedestrian access to the building site is needed. Our gate hinge set kit (see accessories) is vital for the correct functioning of this panel, which can double up as a connecting panel.

Art. 003

Art. 271

Panel with integrated gateThis is the quickest and easiest way for a person to get through the fence; a perfectly functional pedestrian gate measuring 2000x1000 mm is inserted in a 2000x3500 mm panel of various models.

Art. 011

The technical features of our gates and connecting panels are compliant with all fencing models.

Chain with padlock

13

AC

CES

SO

RIE

S

Accessories

Anti noise panelAnti noise panels are the ideal solution to reduce noise level created by work on site close to residential or protected areas. Studied as acoustic barrier for working site, are often used in many industrial applications, in bar, disco, or residential installations.The panel has an index of sound insulation Rw=14 Db certified laboratory accor-ding to test UNI EN ISO 140-3 2066 e UNI EN ISO 717-1 1997.The panel can be installed on any kind of support. Specially designed to be installed easily and in absence of specialized staff. The panel is provided with metal hooks, and accessories which allow the installation of any type of mobile fencing, grid fence, scaffolding or residential fence.

size module: 2000x1200 mm.

Typical installation:• Anti noise mobile system or mobile fencing• Absorbing shields for generators• Acoustic barriers to reduce the inconvenience caused by disk or pubs• Acoustic residential barrier • Acoustic barriers residential to increase privacy and acoustic comfort• Acoustic shielding systems for metal or wood cutting• Aoise barriers for activities such as sanding and cleaning facades and monuments• Acoustic barriers for car wash facilities

Art. 3011

“Best” access siteThis kind of access is available both pedestrian and driveway.

It combines the superior strength of the structure, always made with Anticlimb mesh, the customization possibilities with plates showing the requirements safety on site.

Best Access site can be used in sports events, concerts and meetings.

Art. 2811

14

(a)(b)

(c)

MO

BI

LE

Mobile fencing

Privacy 1.2 mobile systemWhen municipal regulations require a worksite with aesthetic appeal, we recommend using our PRIVACY 1.2 sheet metal model that guarantees compliance with safety and privacy regulations. Available in galvanised or galvanised and powder coated sheet metal. It can be produced in all the lengths of the Privacy Semi-opaque privacy model. It can be installed on the various concrete traffic barriers using the appropriate profiled flanges.

Size: (a) 1200x1200 mm. (b) 1200x2200 mm. (c) 1200x2500 mm.

Art. 076/1.2

9010 white 7016 anthracite grey 5010 gentian blue 5002 Ral blue 5008 grey blue6018 green RAL 7004 3020 red 1018 yellow

RAL Colours:

RAL 5018

NEW2016

In compliance with the safety standards applied by various municipalities,

the lower part of the panel is coated with a special fluorescent powder

that ensures fencing visibility in the dark.

15

MO

BI

LE

Mobile fencing

Art. 076

Opaque Privacy mobile system When municipal regulations require aesthetic appeal, and custom colours for the security perimeter, we recommend using our PRIVACY mobile system that guarantees compliance with safety and privacy regulations. For maximum stability it’s best to use this system with stabilising struts and safety coupling devices (see accessories).Available in galvanised or galvanised and powder coated sheet metal.

Size: 2000x2200 mm. / 2000x1000 mm.

9010 white 7016 anthracite grey

5010 gentian blue 5002 Ral blue 5008 grey blue

6018 green RAL 7004 3020 red 1018 yellow

RAL colours:

RAL 5018

16

MO

BI

LE

Mobile fencing

Semi-opaque Combi mobile systemThe SEMI-OPAQUE COMBI mobile system is used in the securing of road works, during excavations or demolition work, wherever it is necessary to contain debris.The upper part of the panel is made of welded wire mesh. The lower part of the SEMI-OPAQUE COMBI PANEL can be made from galvanised or galvanised and powder-coated polyester sheet metal. The SEMI-OPAQUE COMBI mobile system is available in varying lengths and, on request with different types of welded wire mesh and different colours for the sheet metal.

Size: 2000x2200 mm. / 2000x2500 mm. / 2000x3500 mm..

This system is also called “anti-billposting”.

Art. 211/CS


RAL colours:

RAL 5018

17

MO

BI

LE

Mobile fencing

Art. 2511000 2000x1750 mm Art. 2521001 1100x1750 mm

Site Hoarding SystemOur SITE HOARDING SYSTEM can be used for metropolitan areas or for defined construction and building sites. The heavy-duty structure guarantees protection for the work area and optimum security for the worksite.Available in galvanised or galvanised and powder coated sheet metal.

Heavy-duty post:Double C-profile 20x50x80 mm – thickness 30/10 mmTraffic barrier wall clamp – thickness 40/10 mm Hoarding panel:Corrugated sheet metal (EGB 401) thickness 7/10 mm

Finish:Sendzimir galvanised or galvanised and powder coated (RAL 9010 white).Any other RAL colour on request.

Structures of up to 3700 mm high are constructed.

18

RO

AD

SA

FE

TY

Road safety

Best safety barrierIt has a steel core and white polyethylene coating. Extremely durable, indestructible. Suitable for any road works, to delimit work areas, areas for special events, it can be positioned in any place where traffic control and detours are required.It can be combined with any of the footing types.

Size: 1100x2000 mm.

The special patented shaping of the reflective bands provide maximum visibility even when viability is close to the safety barrier. (see detail)

Art. 023/B

Semi-Opaque Combi safety barrierAn evolution of the standard galvanised steel safety barrier. The double reflective band applied on the galvanised steel frame distinguishes it from the standard steel safety barrier. It can be combined with any of the footing types.

Size: 1100x2000 mm.

Art. 023/C

Exclusive polyethylene safety barrierThis brand new concept of a polyethylene traffic barrier ensures maximum safetyand visibility in compliance with all road regulations. Feet can be rotated. Made to comply with all the most up-to-date European traffic regulations defining colour and reflection of road signs. The modular barrier and the very simple hooking system mean it can be used for an infinite number of purposes even on uneven surfaces. The material is resistant to UV rays so the colour will not fade. Easily transported.

Size: 1100x2000 mm.

Art. 023

19

RO

AD

SA

FE

TY

Road safety

BTP barrierThe SOD/DB barriers are one of the essential mobile elements needed for securing and signposting temporary worksites. They are light, strong and very economical compared to other steel barriers and can be mounted rapidly and effectively. You can advertise your business activity with a small, customised nameplate.

Size: 1000x1540 mm.Tube diameter: 27 mm.Finish: galvanized and epoxy powder coating

On request, high-visibility white and yellow inserts with Level 1 reflectivity can be applied.

Art. 023/DB


RAL colours:

RAL 5018

“ECO” barrierNo needs of maintenance, design without corners to avoid damage to persons or vehicles, completely recyclable because made of polypropylene.Easy storage and palletizing, easy transport in small vehicles.excellent stability in cross wind feet which rotate 360 degrees. Inside feet with steel shaft for maximum impact resistance. Quick and easy connection between two barriers.

Applications: City centers, police, hotels, sports centers, schools, universities, ports, shopping malls, airports, train stations, subways.

Available colors: Red, yellow, blue.Size: 1150x2000 mm.

Art. 023/E

NEW2016

20

RO

AD

SA

FE

TY

Road safety

Galvanised steel safety barrierGalvanised steel safety barrier. Hot-dipped galvanised after welding. Frame in 35 mm diameter steel tubing holding 16 mm vertical tubes welded 12 cm apart. Joins together quickly with hook and eye attachments. Horizontal space has been set up for Class 1 reflective band - guaranteed and marked for 7 years with white/red film.

Size: 1100x2000 mm. Kg 9.80Size: 1100x2500 mm. Kg 12.50

Art. 030

Cubo safety barrierTo delimit hazardous areas, damaged asphalt, to mark out entrances to the sewage system, to enclose small work areas.The double reflective band applied distinguishes it from the standard steel safety barrier.The CUBO (cube) system is self-bearing and does not require any footing.

Size: 1100x1200 mm.

Art. 030/C

Galvanised steel Strong barrier Art. 093

NEW2016

Made with piping 38 mm in diameter and 19 vertical bars 12mm in diameter.Quick assembly of elements via 2 side grapples and 2 side brackets.Class 1 reflective, white/red marked plastic film strip can be inserted horizontally – 7 years warranty.

Size: 1100x2500 mm. Kg 17.50

21

MU

LTIP

UR

PO

SE

Multipurpose systems

Ciclostrada Pluscrowd control barrierBranding is one of the most interesting aspects of sporting events.A screen printed fabric banner can be attached to the crowd control barrier system. Four-colour print provides the best possibilities for graphic design and advertising.

Art. NL /

Pedestrian access controlOur galvanised steel crowd control barriers can also be used for controlled access to concerts, sports events and other public events in general. A simple accessory enables them to be used for this application.The corresponding gates can also be supplied on request.

Art. 030/A2

Ciclostrada Base crowd control barrierWith the simple addition of a specially designed accessory, our galvanised steel barriers can be slanted 15° to be used for crowd control at sporting events like cycling, marathons, road races.

Art. 030/A1

22

Primjer uporabe na str. 14

AC

CES

SO

RIE

S

Accessories

Concrete footing

High visibility PVC footing

Recycled plastic foot

Made from reinforced concrete.

Kg 27.00 Pcs 40

PVC exterior, concrete inside.

Kg 26.00 Pcs 40

Made from 100% recycled plastic.

Kg 22.00 Pcs 50 or 45

Art. 015

Art. 014

This foot is recommended for heavier fencing systems and for crowd control barriers with steel cores and polypropylene coating.

Available in two different heights:105 mm and 140 mm.

Kg 28.00 Pcs 50

Art. 026/C

Art. 026

To be used in the lightest range of fencing (Art. 001 and Art. 001/B).

Kg 16.50 Pcs 50

Art. 026/B

Gate hinge set kitAccessory needed for every type of gate.Comes with nuts & bolts.Galvanised material.

Art. 018

Standard coupler (clamp)Indispensable accessory for any gate. Comes with nuts & bolts.Galvanised material.

Art. 019

Road safety steel baseSteel base for pedestrian traffic safety, to avoid the dangerous projection of traditional bases.Can be weighed down on work site side using the most common types of bases or bolted to the ground.

Kg 3.50 Pcs 50

NEW2016

The standard coupler is combined with galvanized anti burglary hardware.Galvanised material.

Art. 019/S

above

under

Art. 018/B

Art. 017/B

23

AC

CES

SO

RIE

S

Accessories

Plus wheelFor smooth rotation of all gates.

Art. 207/B

Wheel

Art. 207Panel blocking kit

Stabilising strut

This is an anti-lift kit used to make sure the panel is not lifted out of the base.

Made from tubular steel.Galvanised material.Lengths:2000 mm.3400 mm.

Art. 019/B

Art. 021

Plusstabilising strutThis stabilising system is recommended when no holes or demolition works can be carried out on the mounting surface; for particularly valuable pavement surfaces like historical centres.

Art. 021/B Bracket for concertina wireWhen our fencing systems are used to secure worksites in areas like military zones and power stations, in other words when concertina wire - barbed wire or razor wire with steel pickets - is adopted as a topping, this accessory is essential.

Art. 019/C

Strut for positioning barbed wire

You can put three or more lines of barbed wire.To set this strut is needed a standard coupler.

Art. 019/D

24

AC

CES

SO

RIE

S

Accessories

Adaptor for ET100 concrete road barriers

Threaded bar

To be used when mobile fencing systems are put up as road barriersGalvanised material.

Essential accessory to attach the adaptors to the reinforced concrete bases.

Art. 016

Special adaptor for U-shaped or L-shaped concrete road barriers

Art. 016/B

Galvanised steel plateTo use in special traffic situations when the typical footprint of other footing types is inappropriate.Galvanised material.

Art. 017

To fix all our flat-bottomed plates to the ground.

Art. 021/D

Soil pin

where it is not possible to use our foot, for example on the road surface, it is recommended this type of accessory, simple and practical. The tip is made of T-profile.

Art. 021/C

Steel Tip

In this version the steel tip is made of solid steel 20 mm.

Art. 021/E

Spiral screw

Bracket

It is used when you need that the panel foot does not move.

Ribbed steel bracket for ground mounting foot panel support.

Art. 021/G

Art. 021/F

Art. 25119999

2525

AC

CES

SO

RIE

S

Accessories

It is available in hot-dipped galvanized steel (025/Z) or with the more economical grey powder coating (025/V).Available for 3530 mm or 2000 mm long panels.This is used to easily handle all our mobile fencing models.

It can contain 28 pieces of these models:“Anticrisis” - Base - Heavy - Heavy Plus - EU1/B - EU3 - EU4 - EU5.

Art. 025/V/Z

Art. 025/V/V

Fencing transport rack

Art. 025/O/Z

Art. 025/O/V

Depending on the model, the following can be stacked:Mobile Sistem “Anticrisis” Pcs 40Mobile Sistem Base Pcs 35Mobile Sistem Heavy Pcs 30Mobile Sistem Heavy Plus Pcs 30 Mobile Sistem EU1/B Pcs 30Mobile Sistem EU3 Pcs 30Mobile Sistem EU4 Pcs 30Mobile Sistem EU5 Pcs 30 The transport racks are stackable.

On request, the fencing panels can be delivered already stacked in the racks.

26

MES

H S

HAD

E TA

RPS

Mesh shade tarps

Lightweight shade tarps

High visibility lightweight shade tarpsClass 1 reflective strips are inserted horizontally to make the construction or building site more visible at night.

Art. NL /

Art. NL /

Colours

Our lightweight tarps can be used to provide visual privacy to construction and building sites or public events, if they are required by law or necessity.We supply a variety of mesh shade tarps that differ from each other in basic weight and colour. The micro-mesh guarantees stability with the fencing system even in the strongest winds. The tarps can be decorated with drawings or photos to personalise the construction or building site or the event.The prints can be applied to one or more shade tarps.Basic weights available: 140 gr. - 200 gr.

27

WIR

E

MES

H

Welded wire mesh

deformed

plain

Mesh 50x50 mm Mesh 75x75 mm Mesh 100x100 mm

Anti-cracking welded meshSpecially for radiant floorsOur company also specialises in the production of hot-dipped galvanised PLAIN WIRE and cold-dipped galvanised DEFORMED WIRE, for standard use as an anti-cracking system in RADIANT FLOORS (floor heating).

panel finish: on the external edge, barbed or flush (smooth-edged)

Our panels can be used to create shrinkage compensating grout, minimising thickness; plasterwork is also easier and typical problems of cracking concrete – particularly the damage caused by this cracking – can be avoided.

Plain wire

Deformed wire

Art. 6065/.........

Art. 7184/.........

Mesh Wire Dimensions

HxL HxL

50X50 2 1000X2000

50X50 1.8 1000X2000

50X50 1.7 1000X2000

55X55 1.6 1000X2000

75X75 1.8 990x2040

100X100 3 2000x2000

100X100 3 1000X2000

100X100 4 2000x2000

100X100 6 2000x3000

28

WIR

E

MES

H

Welded wire mesh

Welding of the crossed wires using an innovative technology makes the welded wire mesh a safe, versatile product. The following standard size panels are available: 1000x2000 mm, 1200x2400 mm, 1600x2000 mm through to 2000x3000 mm and all the sizes in between. They are all available in smooth, galvanised or stainless steel wire (diameter: 2.00 - 6.00 mm), with mesh size from 20x20 mm through to 200x200 mmApart from the standard mesh panels (see tables), we also manufacture bespoke panels to customer designs with maximum flexibility, product quality and punctual delivery. Quality welded wire mesh panels with precise flat and orthogonal lines. The mechanical and chemical characteristics of the wire mean the welded mesh can be used in a wide variety of other projects and applications in steelwork, security and the building industry.

Welded wire mesh: smooth, galvanised and stainless steel (AISI 304 and AISI 316 and AISI 316L).

Our company supplies galvanised wire in diameters of 2.00 mm to 5.00 mm, in rolls of 100 to 1000 Kg.

Finger-proof mesh


HxL HxL

60X11 2.85 1000X2000

60X11 2.85 1200X2400

100X11 2.85 1040X2000

100X11 2.85 1240X2400

Knuckle-proof mesh

105X15X105 2.85 1040X2000

105X15X105 2.85 1240X2400

105X15X105 2.85 1000X3000

105X15X105 2.85 1240X3000

105X15X105 2.85 2400X2400

Square mesh


HxL HxL

20x20 2 1000X2000

20x2020x20

2.852.85

1200x20001200X2400

25x25 2 1000x2000

25x2525x25

2.852.85

1000X20001200x2400

30x3030x30

2.852.85

1000X20001200X2400

30x3030x30

44

1000X20001200X2400

40x4040x40

2.852.85

1000X20001200X2400

40x4040x4040x40

444

1000X20001200X24002000X3000

50x5050x50

2.852.85

1000X20001200X2400

50x5050x5050x50

444

1000X20001200X24002000X3000

50x5050x50

55

1000X20001200X2400

100x100 2.85 1000X2000

100x100100x100

44

1000X20001200X2400

100x100100x100

55

1000X20001200X2400

100x100100x100

66

1000X20001200X2400

Accident prevention welded wire mesh

Welded wire meshWelded wire mesh in stainless steel, hot-dipped galvanised and smooth polished wire, also to customer drawing.

29630 x 2500

630 x 2000

830 x 2500

830 x 2000

1030 x 2500

1030 x 2000

1230 x 2500

1230 x 2000

1530 x 2500

1530 x 2000

1730 x 2500

1730 x 2000

1830 x 2500

1830 x 2000

2030 x 2500

2030 x 2000 IND

US

TR

IAL

Industrial fencing

3D PanelOur 3D panel consists of stylish welded wire mesh panels with V-shaped profile reinforcing folds.The 3D Panel system is an essential element in securely fencing off property. As this is a modular system, it guarantees quick and simple assembly. It is ideal for residential and industrial use as well as for public lawns, gardens and parks.

The panels and posts are made out of galvanised steel with a protective polyester coating.The diameter of the panel wire is 5.00 mm

Matching gates:single or double pedestrian gates, single or double vehicle gates and sliding gates.The 3D Model is available in RAL 6005 green or RAL 7030 grey.

V-shaped profile reinforcing folds are made to suit the height of the panel.Mesh size is 200x50 mm

Available in sizes:

30

630 x 2500 1830 x 2500

2030 x 2500 2430 x 2500830 x 2500

830

1030 x 2500

1030

1230 x 2500

1230

1530 x 2500

1530

1730 x 2500

1730 20

30

2430

IND

US

TR

IAL

Industrial fencing

Our Double Wire model is made from stylish welded wire mesh panels with double longitudinal wiring. It is ideal for use in industrial buildings, sports facilities and any sites where maximum security is necessary.

The Double Wire 1 Stadio model is made with double longitudinal 8 mm and 6 mm vertical wires. It is ideal for sports facilities and where CONI regulations have to be met. The Double Wire 1 Stadium panel model conforms to UNI 10121 – UNI13200/3.

The Double Wire 2 model is made with double longitudinal 6 mm and 5 mm vertical wiring. The posts are made out of 60x40 mm galvanised steel sheet sections and have a thickness of 2.0 mm (recommended) or 60x60 mm sections with a thickness of 1.5 mm It is available in RAL 6005 green and RAL 6030 grey. It is hot dipped welding according to the ISO 1461 regulation and is powder coated according to the ISO 5254 regulation.

Matching gates:Pedestrian gates with one or two doors, residential gates with one or two door and sliding gates.

Double Wire model panel

31

IND

US

TR

IAL

Industrial fencing

Posts for 3D Model and Double WireTo meet all your fencing needs, our company has four types of posts.Although they are designed differently, all the posts provide utmost structural security.Each type of post has a corresponding panel-to-post fixing kit. The square section post (60x60 mm) is the most popular and famous.

Rectangular post

Square post

Europost post

Ecopost post

Rectangular section post (60x40 mm), 1.5 mm thick. The lightest in the category. This is supplied both in the anchor version (for grouting in the concrete foundation) and in the bolt-on version using a steel flange to bolt it onto the base, for fixing to concrete curbing.

Square section post (40x40 mm), 1.5 mm thick. This is the most common type of post. It is supplied both in the anchor version (for grouting in the concrete foundation) and in the bolt-on version using a steel flange to bolt it onto the base, for fixing to concrete curbing.

This basically H-section post comes in 1.2 mm thick galvanised steel (Z-275).With this type of post, the panel-to-postfixing is hidden by the form of the post.It has a particularly stylish appearance.

This triangle section upright post comes in 1.2 mm thick galvanised steel (Z-275).It is known for its versatility in creating non-linear sections of fencing.

32

IND

US

TR

IAL

Industrial fencing

3D Panel Rectangular post Square post Europost post Ecopost post

Dimensions Mesh Wire Dimensions Accessories Dimensions Accessories Dimensions Accessories Dimensions Accessories

HxL HxL HxLxL Stopper Clip HxLxL Stopper Clip HxLxL Stopper Clip HxLxL Stopper Clip

630x2500 200x50 5.00 900x40x60 1 2 900x60x60 1 2 - - - 900x67x64 1 -

830x2500 200x50 5.00 1300x40x60 1 2 1300x60x60 1 2 1300x50x70 1 4 1300x67x64 1 -

1030x2500 200x50 5.00 1500x40x60 1 2 1500x60x60 1 2 1500x50x70 1 4 1500x67x64 1 -

1230x2500 200x50 5.00 1800x40x60 1 3 1800x60x60 1 3 1800x50x70 1 6 1800x67x64 1 -

1530x2500 200x50 5.00 2000x40x60 1 3 2000x60x60 1 3 - - - 2000x67x64 1 -

1730x2500 200x50 5.00 2000x40x60 1 4 - - - - - - - - -

1830x2500 200x50 5.00 2350x40x60 1 4 2350x60x60 1 4 2350x50x70 1 8 2350x67x64 1 -

2030x2500 200x50 5.00 2500x40x60 1 4 2500x60x60 1 4 2500x50x70 1 8 2500x67x64 1 -

Double Wire model panelRectangular post Square post

1 Stadio 2 Stadio

Dimensions Mesh Wire Wire Dimensions Accessories Dimensions Accessories

HxL HxL Orizz/Vert Orizz/Vert HxLxL Stopper Clip HxLxL Stopper Clip

830x2500 200x50 8.00/6.00 6.00/5.00 900x40x60 1 - 900x60x60 1 -

1030x2500 200x50 8.00/6.00 6.00/5.00 1300x40x60 1 - 1300x60x60 1 -

1230x2500 200x50 8.00/6.00 6.00/5.00 1800x40x60 1 - 1800x60x60 1 -

1530x2500 200x50 8.00/6.00 6.00/5.00 2000x40x60 1 - 2000x60x60 1 -

1730x2500 200x50 8.00/6.00 6.00/5.00 2000x40x60 1 - 2000x60x60 1 -

2030x2500 200x50 8.00/6.00 6.00/5.00 2500x40x60 1 - 2500x60x60 1 -

2430x2500 200x50 8.00/6.00 6.00/5.00 - - - - - -

Standard

All other RAL colours on request

COLOURS

RAL 6005

RAL 6030

33

Green Solution

GR

EE

NOur “Best Green Solution” perimeter fencing solves the problem ofsecuring areas where your ABOVE-GROUND LPG TANKS arelocated.

Four standard modules create a 2 m high structure with a perimeter of3.5+2+3.5+2 m. One of the 3.5 m side panels has an access gate witha passageway of 1.8x1 m.The perimeter tube of the structures and the welded wire mesh panelsare made from pre-galvanised steel.The corners are composed of special “security clamps”, two for eachside.

The gate has a latch closure, and a simple padlock can be added tolock it.

panel size:- panel with integrated gate 2000x3530 mm.- connecting panel 2000x2000 mm. / 2000x1500 mm.wire diameter: 3.00 mm. horizontal 2.80 mm. verticalmesh size: 90x300 mm.tube diameter: 40/42 mm. vertical - 30 mm. horizontalfinish: galvanised tube & wirePcs. 40

Apart from the catalogue range, Bestsider alsomanufactures all kinds of Green Solution panelsaccording to customer size and structuralspecifications.

Standardcoupler (clamp)

Latch closure

Green SolutionArt. 1001G

34

RO

AD

SA

FE

TY

Road safety

Traffic barrierOur polyethylene TRAFFIC BARRIERS can be easily placed in building site roads, carparks, racing circuits and areas that need to show limited vehicular access. They are easy and straightforward to transport and they can be filled with water or sand ballast. Plugs in the top and bottom make for rapid filling and emptying of the TRAFFIC BARRIER. Filling the barrier with ballast to the level indicated guarantees maximum stability and the polyethylene body is resistant to atmospheric pollutants & UV rays, so it will not fade.Volumes transported are reduced by up to 50% because they are stackable.

Size: 1000x700x400 mm.

White

Red

Art. 055

Art. 056

• Can be positioned to make curves of varying radii.

• Easy to fill up and empty with liquid ballast.

• Easy to move with a forklift truck

• Volumes transported are reduced by up to 50% because they are stackable.

-50%LESS VOLUME

SPACE

35

BU

UL

DIN

G

Building site equipment

Tub for ConcreteTub to load concrete or liquids.Made from yellow, high density polyethylene (HDPE) with steel structure for lifting.It comes with an extremely strong, steel perimeter, with two folding handles for safe and stable handling and lifting.This product is TÜV NORD tested to PRÜFPROGRAMM M50/08.

THE CONCRETE WILL NOT STICK TO THE TUB SURFACE.

On request: the product can be customised both with a special colour and the customer logo.

The yellow colour makes it highly visible when the load is suspended.

Weight:18 Kg

Maximum load capacity:518 kg

Maximum load:500 kg

Contents: 0,2 m³ / 200 liters.

Certification:Tested by TÜV Product Service

Art. 390.900200.00.10

Can be customised with your logo

IT 23900 Lecco (LC) - Via alle Fornaci, 6

Tel. +39 0341 423064 - Fax +39 0341 424113

www.bestsider.eu

[email protected]

[email protected]

[email protected]

[email protected]

[email protected]

Documents

Sixteen - Agrimoll Molle per L'Agricoltura · 2016. 3. 31. · COA Company. 3 COA Company ... 2016. 5 2400 2400 2400 2400 2400 Edge protection EE ROECO NEW Temporary Border Protection