Simem Service Solution

Promotional package to increase the batching plant

performance and efficiency

Simem Service Solution

•local regulations on concrete quality•new technologies may reach better performances

•safety requirements •updated technologies may have a better energy efficiency.

Therefore our proposal is to keep updated Your plant in order to extend its life for the better results!

SIMEM plants are installations with a typical long life from the mechanical point of view, that can reach 20 or 30 years of working life.But during this time a lot of things may change:

Simem Service Solution – main key factors:

PerformanceEfficiency

Safety

Performance:Batching AutomationSupport

Efficiency:Control panelWashing systemSpare parts

Safety:CE security system

Batching Automation

With new Simem@tic 3.0

SIMEM Automation is the only automation system able to optimizeyour SIMEM plant. Any generic

automation is not able to develop 100% of the plant capabilities

Batching Automation

Convert existing Simem@tic Touch into Simem@tic 3.0

Increase plant capacity of 20% (*)

Increase dosage precision of 1% (*)

Adapt old plant to new local regulations

Identify and elminate risk due to discontinued products

Batching Automation

ON LINE•Help desk•Spare parts order•Call for intervention

Support

Supervising

•Highly qualified•10+ years of experience•Troubleshooting skills

Add value with Simem technicians

Support

Training

On-site

On-line

Support

Retrofit & Upgrades Service

Control panel equipped with latesttechnologies (softstarters, inverters, …) can increase plant performances andincrease the energy efficiency

Retrofit control panel can significantly increase efficiency and plant output

Control panel

High quality

Certified warranty

High performance

SimemGenuine PartsGenuine Parts

Spare parts

Using genuine parts is a best maintenance practiceKey factor in protecting and improving reliability

Inventory management for spare, interchangeable and obsolete parts

We guarantee superb qualityInnovative metallurgical techniques Simem

Genuine PartsGenuine Parts

Spare parts

Filters

Electricalgreasing

Video control

Induction flow meter

Seals

Housing

New components for mixer units

Spare parts

The latest mixer washing technology

Washing

A high pressure washing system reduces working time for the operator and helps keeping the mixer in very good conditions

CE security keys, designed to disconnect the mixing motors in case of emergency

CE Security Systems

Kit of safety devices according to actual European regulations:

•Galvanized protection panels•Pneumatic valve for emergency release of air

CE Security Systems

Extra components

Extra components available to optimize your plant control and results:

www.simem.com