Sikaplan® WP Control Socket 14

Product Data SheetSikaplan® WP Control Socket 14December 2020, Version 02.01020720804000000014

PRODUCT DATA SHEET

Sikaplan® WP Control Socket 14PVC-p resin and cementitious injection flange for Sikaplan® WP waterproofing membranes

DESCRIPTIONSikaplan® WP Control Socket 14 is a PVC-p resin and cementitious injection flange element that is hot air welded to Sikaplan® WP waterproofing membranes.

USESAs an access port for resin and cementitious injection to seal substrate leaks and for leak detection in base-ment and tunnel compartments waterproofed with Sikaplan® WP sheet membranes

CHARACTERISTICS / ADVANTAGES14 mm thread for various injection hose systems▪Contains no DEHP (DOP) plasticisers▪Compatible with all Sika® PVC waterproofing mem-branes

▪

Hot air weldable▪Easy and quick application▪

PRODUCT INFORMATION

Composition Polyvinyl Chloride (PVC-P)

Packaging 50 pieces / boxRefer to current price list for packaging variations

Appearance / Colour Round black base plate with hose connection socket for attaching injection hose

Shelf Life 5 years from date of production

Storage Conditions Product must be stored in original unopened and undamaged packaging in dry conditions and temperatures between +5 °C and +35 °C. Always refer to packaging.

Diameter 180 mm

Unit Weight 0.070 kg

SYSTEM INFORMATION

System Structure Ancillary products:Sikaplan®-1406 Connector▪Sikaplan® W Control Tube PU 6mm▪Sikaplan® W Connection Piece 6mm Sikaplan® W Injection Piece▪Sikaplan® W Lock Cap 6mm▪Sikaplan® W Lock Connection Cap 6mm▪Closure Plug Type 1▪

1 / 3

Compatibility Not compatible in direct contact with bitumen which could adversely af-fect the product properties.

APPLICATION INFORMATION

Ambient Air Temperature +5 °C min.

BASIS OF PRODUCT DATAAll technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.

FURTHER INFORMATIONSika Method Statement: Sikaplan® WT / WP sheet membrane system for waterproofing of tunnels

▪

Sika Method Statement: Sikaplan® WT / WP sheet membrane system for basements and other below ground structures

▪

IMPORTANT CONSIDERATIONSInstallation work must only be carried out by Sika® trained and /or approved contractors, experienced in this type of application.

Not bitumen resistant▪

ECOLOGY, HEALTH AND SAFETYREGULATION (EC) NO 1907/2006 - REACH

This product is an article as defined in article 3 of regu-lation (EC) No 1907/2006 (REACH). It contains no sub-stances which are intended to be released from the article under normal or reasonably foreseeable condi-tions of use. A safety data sheet following article 31 of the same regulation is not needed to bring the product to the market, to transport or to use it. For safe use follow the instructions given in the product data sheet. Based on our current knowledge, this product does not contain SVHC (substances of very high concern) as listed in Annex XIV of the REACH reg-ulation or on the candidate list published by the European Chemicals Agency in concentrations above 0,1 % (w/w).

APPLICATION INSTRUCTIONSSUBSTRATE QUALITY

Refer to Sika Method Statements:Sikaplan® WT / WP sheet membrane system for wa-terproofing of tunnels

▪

Sikaplan® WT / WP sheet membrane system for ▪

basements and other below ground structures

APPLICATION METHOD / TOOLS

Strictly follow installation procedures as defined in method statements, application manuals and working instructions which must always be adjusted to the ac-tual site conditions.Reference must be made to Sika Method Statements:

Sikaplan® WT / WP sheet membrane system for wa-terproofing of tunnels

▪

Sikaplan® WT / WP sheet membrane system for basements and other below ground structures

▪

Flange for cementitious injectionUse fitting protection hose:

Flange for resin injectionUse Sikaplan®-1406 Connector:

LOCAL RESTRICTIONSPlease note that as a result of specific local regulations


2 / 3

the performance of this product may vary from coun-try to country. Please consult the local Product Data Sheet for the exact description of the application fields.

LEGAL NOTESThe information, and, in particular, the recommenda-tions relating to the application and end-use of Sika products, are given in good faith based on Sika's cur-rent knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika’s recommenda-tions. In practice, the differences in materials, sub-strates and actual site conditions are such that no war-ranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recom-mendations, or from any other advice offered. The user of the product must test the product’s suitability for the intended application and purpose. Sika re-serves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.

Sika Kimia Sdn. Bhd.Lot 689, Nilai Industrial Estate,71800 Nilai, Negeri Sembilan D.K.MalaysiaPhone: +606-7991762e-mail: [email protected]: www.sika.com.my

SikaplanWPControlSocket14-en-MY-(12-2020)-2-1.pdf


3 / 3

Documents

Sikaplan® WP Control Socket 14