110 P

RODUCTS

The Siemon XLBET (Extra Large Building Entrance Terminal) frames aredesigned to be used in large installations where space is a premium.Innovative horizontal and vertical cable managers provide cable paths forrouting of large quantities of cross-connect wires or S110® Patch Cords.

XLBET FRAME

Cut installation time with Siemon pre-wired XLBETframes. A wide variety of custom configurationsare available. Contact our Technical SupportDepartment for more information

Vertical side channels are 6 in. (152mm)deep to accommodate large cable bundles

Frames can be ordered with standard S110blocks factory mounted to save installation time

Frames can beordered with orwithout S110 bases

S110 bases can bemounted on one or bothsides for additionalcapacity

Concrete mountingkits are availablefor securing framesto concrete floors

Frames are 7 ft. (2.1m) high

Configure up to 7,200 -pairs

Innovative horizontal and verticalcable managers provide cable pathsfor routing of large quantities ofcross-connect wires

Standard rack mounting perANSI/EIA-310-C

Frames are available in 23 in.(584mm) widths

SS_XLB_F (US) _F 3/31/11 2:29 PM Page 1

PRO

D-S

S-XL

B Re

v. F

3/

11

© 2

011

Sie

mon

110 P

RODUCTS

617.5mm(24.31 in.)

2.1m (84 in.)

406.4mm (16 in.)

.228mm (9 in.)

Front Side

XLBET Frame:XL-(XX)00 ....................7 ft. x 23 in. (2.1m x 584mm) XLBET

frame. Includes rack, wiremanagement and mounting hardware.S110® wiring blocks not included

Use (XX) to specify pair count: 36 = 3600 pair, 72 = 7200 pair

XLBET Frame with S110 Wiring Blocks:XL-(XX)00-W ...............7 ft. x 23 in. (2.1m x 584mm) XLBET

frame. Includes rack, wiremanagement and mounting hardware.S110 connecting blocks not included

Use (XX) to specify pair count: 36 = 3600 pair, 72 = 7200 pair

Accessories:XL-CK..........................Concrete Mounting Kit. Includes all

necessary hardware to secure one (1)23 in. (584mm) XLBET frame to aconcrete floor

XL-(X)-3600.................S110 connecting block kit. Includesthe appropriate number of 4- or 5-pair connecting blocks to fullypopulate a 3600-pair frame. Two kitscan be ordered for 7200-pair frames.

Use (X) to specify connecting block: A= 5-pair, B= 4-pair

XL-K23 ........................23 in. (584mm) rack conversion kit.Converts one side of a standard 23in. (584mm) rack to an XLBET frame.Two kits are required to utilize bothsides of a 23 in. (584mm) rack.Includes wire managers, mountingbars and mounting hardware.*

*Rack, S110 wiring blocks, clear designation holders andlabels not included.

Because we continuously improve our products, Siemon reserves the right tochange specifications and availability without prior notice.

S110® is a trademark of Siemon

For related product information request Spec Sheet(s):S110 Category 5 Patch Plug (PROD-SS-10P)

The AmericasWatertown, CT USAPhone (1) 860 945 4200 USPhone (1) 888 425 6165 Canada

Europe/Middle East/AfricaSurrey, EnglandPhone (44 ) 0 1932 571771

Asia/PacificShanghai, P.R. ChinaPhone (86) 21 6390 6778

Latin AmericaBogotá, ColombiaPhone (571) 317 2121

PRODUCT INFORMATION

SS_XLB_F (US) _F 3/31/11 2:29 PM Page 2