Shipbuilding equipment / Offshore plant

New & Renewable, Environment, Energy, Power generation plant

Shipbuilding equipment / Offshore plant

CONTENTS

1. Company Introduction

2. Company Status

3. Introduction

4. Service Activities

5. Business Area

6. Business detail introduction

7. Organization

8. Plant Detail Business Area

9. Project Experiences

Company Status / Business Area

Shipbuilding equipments(PIPE SPOOL) Business Division

We manufacture and supply pipes for various industries ranging from carbon steel pipes, stainless steel pipes, and special pipes used in power plants to shipbuilding, offshore plants, and power generation facilities.

Environment / Energy Business Division

From the design, construction and commissioning of waste incineration plant, MBT, and incineration power plant, to realize customer satisfaction through professional engineering.

New & Renewable Energy Business Division

We are concentrating our efforts on R & D such as small hydro power generation, waste heat recycling power generation (ORC), organic wastes drying, and fuel conversion.

Plant Business Division

We specialize in construction of shipbuilding / offshore block, offshore plant, environmental plant, power plant facility.

POSHPOSH

2


Challenges for the future

We will become a company that meets the needs of customers

with customer-oriented management practices.

POSH creates corporate value for human

beings, technology ahead of the future, and

bigger management for the world.

We will grow into the world's leading company

in PIPE SPOOL, shipbuilding / offshore block,

marine plant field, environmental energy and

renewable energy.

President Bong kyo Kim

CEO Message

POSH

3

POSH which has created Shipbuilding, materials industry and new plant, engineering,

construction field and has contributed to advancement of the state and society with

unchanging heart is making its efforts to create a environment where people can

enjoy healthy lives, during past 15 years, since 2003, furthermore, for better life of

customers, for better living and for a environment more advantaging humans, all

staffs and employees of POSH will make their best efforts eagerness and sincerity

and make POSH a company that satisfies needs of customers under customer-cen-

tered management philosophy.

POSH will fulfill its mission as a leading company in the industry in this era of infinite

competition without border, positively cope with the era of globalization through

company innovation and grow to a company equipped with the best competitiveness

by securing cutting-edge high added value technology. POSH which starts the

second leaping through the gro wth of the wor ld’s lead ing company , the crea tion

of corpora te va lue for humans , the techno logy lead ing the future will establish

right values based on company core values and will continuously grow to a prepared

company that is creative and leads the changes and to the topmost enterprise.

This is a commitment POSH is making to customers as well as society and nature.

Thank you.

EV SOLUTION

SESSION

EV S OLUTION SESSION

Company History


2017.08

03

2015.11

09

2012.12

04

2010.12

07

2008. 09

02

2007. 09

09

02

2006. 11

08

04

01

2004. 12

12

06

03

2003. 12

07

1997. 03

Anjeong factory (Shipbuilding & offshore plant specialty painting / production) opened

Environmental Energy Seoul Office opened

Constructed Pipe Inspection Shop

Beginning of construction of Pipe inspection Shop expansion

Constructed Sacheon factory

Beginning of construction of Sacheon factory(for Shipbuilding)

Obtained OHSAS 18001:2007 certificate

Moved Samchunpo factory to Geoje city

Acquired certification of uninjury record of 760days.

Produced the manifold of TOMBUA-LANDANA(6044) project.

Built Pipe Inspection Shop

Built 3RD factory in Samchunpo for fabricating Offshore & Plant

Awards the quality inspection, production and pipe spool division from DSME

Acquired Management Innovation Certificate

Produced the Pipe Rack of AGBAMI(6043) project.

Factory expansion at Seongnae Industrial Complex in Geoje

Built 2ND factory in Dae Gyo to fabricate Offshore & Plant structures

Partnership with DSME (Pipe spool)

Acquired Certification from Lloyds, D.N.V, A.B.S, G/L, B/L

Acqyured ISO 9001 certificate for Quality Mamagement System

Partnership with DSME (Offshore / Plant structure)

Built Factory at Seongnae in Geoje

POSH Incorporated

POSH founded

POSH

4


Shipbuilding & Offshore business

Mission & Vision

Shipbuilding equipment (PIPE SPOOL) / Company that creates future industry through land and marine plant industry

Mission Vision

POSH head office : Shipbuilding, offshore, onshore plant PIPE SPOOL Production

Sacheon Factory : Shipbuilding, offshore block and land plant production

Inspection Shop : Shipbuilding, Marine, Plant PIPE SPOOL Quality and Delivery Management

Anjeong Factory : Shipbuilding, offshore block and land plant production

From PIPE SPOOL technology and ship-building / offshore block and offshore plant industries, we create new value for ship-building, marine and plant industry by de-veloping environmental, chemical and power plant technology.

Growing as a global leader in shipbuilding / offshore plant and environment, power plant facilities

POSH

5

POSH aim to become the world's best in pipe spool manufacturing for shipbuilding, offshore and onshore.

POSH manufactures and supplies spool of carbon steel pipes, stainless steel pipes and special pipes used in shipbuilding, on-shore and offshore plants and others.

Based on our experience and technology, we have gained client's trust by meeting strict quality standards and technical requirements.

In addition, we will provide your company with process control efficiency and cost reduction by providing rigorous product management and total engineering for de-signing, manufacturing, testing, inspection, heat treatment, painting, etc. from the ordering stage of piping products


POSH

6

Fabrication of Pipe Spool for shipbuilding, offshore and onshore.

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �B�e�s�t� �q�u�a�l�i�t�y�,� �B�e�s�t� �d�e�l�i�v�e�r�y� �t�i�m�e�

POSH head office

Shipbuilding&Materials Industry(PIPE SPOOL)

제25회 태성 ANSYS USER MEETING12Company Status / Business Area

Geoje factory Production item

�P�i�p�e� �p�r�o�d�u�c�t�i�o�n� �a�n�d� �i�n�s�p�e�c�t�i�o�n� �1�3�,�0�0�0� �s�p�o�o�l� �/� �m�o�n�t�h

POSH

7

In the business area of Geoje, we customize and construct standard piping and piping used in various industries such as shipbuilding, offshore plant piping and offshore power plant, oil refinery, petrochemical, gas and environmental facilities.

Shipbuilding, offshore block and onshore plant production

POSH aim to become the world's best Company for offshore Blocks, Offshore & Onshore Plant.


POSH

8

Plant Division (PLANT) / Sacheon Branch

Sacheon Factory

POSH specialize in the engineering, manu-facturing and construction of shipbuilding, marine block, onshore & offshore plant, power plant etc.

All employees strictly adhere to our quality management guidelines and the quality requirements by ANSI/ASME/AWS/SMR and fulfill their responsibilities.

In order to provide the best quality and de-livery, POSH will strive to be a trustworthy companion for customers through organi-zational and systematic management ac-tivities.

Based on the experience and technology accumulated in the field of offshore & on-shore plant, we have gained customer's trust by meeting quality standards and technical requirements in domestic as well as overseas.


DSME –JACK UP LEG INPEX -PLATFORM(6054)

DONG HEJRE -PLATFORM(6053)

CHEVRON MSP -MEZZANINE DECK(6055)PETRONAS FLNG-Lay Down(6302)

STATOIL -MEZZANINE DECK(6056)

INPEX -CRANE PEDESTAL & PLATFORM(6054) STATOIL -DECK(6058)

TOTAL CLOV -PIPERACK(6049)

TOTAL CLOV –Boat Landing(6049)

CHEVRON Wheatstone –Deck Unit Supporting(6052)

DONG HEJRE FIXED PLATFORM –Skid Shoe(6053)

Shipbuilding, offshore block

Chemical, environmental plant

chemistry plant power plant

waste plant

Gasification plant

POSH

9

Sacheon Factory Production item

In the business area of Geoje, we customize and construct standard piping and piping used in various industries such as shipbuilding, offshore plant piping and offshore power plant, oil refinery, petrochemical, gas and environmental facilities.


POSH builds the manufacturing facilities from Anjeongplant to plant production and painting and responds to customer needs

POSH specializes in the construction of plants such as shipbuild-

ing, merchant / marine blocs, offshore plants and power generation

facilities.

In particular, Anjeong plant will build painting facilities and strive to

be a trusting partner for customers with systematic and systematic

management activities to provide the best quality and optimum

delivery time to all customers.

We want to meet customers' quality standards and requirements by

experience and technology in the field of marine plants and

coatings from plant production to painting.

POSH

10

Plant Division (PLANT) / Anjeong FactorySpecializing in shipbuilding, offshore block and land plant construction and painting

Anjeong Factory


POSH

11

Anjeong Factory Production item

IAnjeong Factory manufactures and supplies plants for various industries such as ship-building, marine blocks, and offshore plants with production facilities and painting facilities.

Mechanical I

Mechanical II


Environmental Energy Business

Mission & Vision

In 2017,

the beginning of the year.

~2016 2017 FutureIncinerator plant

New&Renewable Energy

Industrial plant

Environmental plant

New&Renewable Energy

Environment / New&Renewable energy Company that makes life more enriched through plant industry.

POSH aims to be the global leader in new

technology / renewable energy plant facilities.

Mission Vision

Energy Handling Technology

POSH

12

As an energy industry think-

ing about nature Change the

world blue With competitive

power plant technology We're

headed for more valuable

tomorrow.

Advanced technology for

future energy - POSH

-Development of incineration power technology and renewable energy source.

The global leader to fulfill the social environmental and eco-nomic responsibilities of the new&renewable energy fields.

-Cogeneration power plant industry.

-Creating new value of energy industry through new&renewable energy developme.

Waste Incineration Waste Recyling Cogeneration power plant

Waste Energy

Small Hydro Power Waste Heat Power Generation Drying and Fueling

New&Renewable Energy Sector


POSH

13

POSH is a waste treatment technology (incineration, pretreatment, cogeneration) and biomass treatment technology We are committed to customer satisfaction based on environmentally friendly new technology that enables Total Solution.

POSH is engaged in the development of new and renewable energy fields such as hydro power generation, waste heat recycling (ORC), organic waste drying and fuel conversion our intensive investment and research in R & D field are doing our best to become the world standard.

From waste incineration plant design to construction and commissioning, we realize customer satisfaction through professional engineering based on abundant technology.

With the scroll generator of new technol-ogy concept, we realize customer satis-faction through professional engineering based on abundant technology from design to construction and commission-ing.

In the waste heat recycling power gener-ation (ORC), 100% responds to custom-ers demand and realizes customer satis-faction by scrolling technology of POSH

Based on the bequest drying technolo-gy, not only the installation of a simple facility, but also the turnkey method that is complete from the beginn ing to the end realizes customer satisfaction.

We Meet 100%of customer's require-ments regardless of the characteristics and conditions, and realize customer satisfaction with the technology of POSH.

We do not only construct a simple facili-ty, but realize customer satisfaction through the perfect turn-key method from start to finish.


A stoker is a device for mechanically supplying fuel to make

combustion.

In a incineration facility, burning is formed according to the

shape of the grate in the incinerator.

The waste is placed thereon and the combustion air is supplied

from the lower part to transfer the waste, and a drive transmit-

ting device for continuously and efficiently performing com-

bustion.

Drying, combustion and post-combustion may be carried out

individually or simultaneously.

The air required for combustion is supplied uniformly from the

lower part of the stoker, and the ash is dropped by the repro-

cessing facility in the lower part of the stoker for cooling and

discharging.

Although the waste is directly put into the incinerator, depend-

ing on the system, a separate crushing treatment facility can be

installed and operated to increase the combustion efficiency.

POSH

14

Waste Incineration

Appliance

Municipal waste

Industrial waste

Hospital waste

Capacity

10ton/day ~ 300ton/day

Special feature

·The most stable use of combustion.

·Possible incineration without pretreatment

·It is possible to treat various kinds of

wastes and simultaneously treat liquid

wastes.

Municipal Waste Incineration Plant(Stoker type )

Stoker


Industrial Waste Incineration Plant(Stoker type )

POSH

15

Incinerator Waste Heat Boiler SDR Bag filter

(Dust Collector)FGD


The basic principle of the gasification incinerator is

divided into a primary gasification furnace through

which waste is introduced, dried and pyrolysed, and a

secondary combustion furnace that completely burns

the generated gas.

The combustion air is appropriately regulated and sup-

plied so that optimum combustion is achieved.

Gasification Incineration refers to the process of trans-

forming organic wastes into useful fuels by physico-

chemical reactions using oxidants in a hypoxic state.

Conventional incinerators have problems with automatic

discharge of flooring and maintenance of constant

combustion temperature.

SRF Gasification Incinerator Plant

POSH

16

Waste Incineration

We have solved the problems of existing incinerators and commercialized a vertical type gasification incinera-

tor that can operate continuously, thereby developing new technologies suitable for supplying heat energy and

for S.R.F generation combustion.

Appliance

Waste solid fuel (S.R.F)

Wood chips, wood

pellets, etc.

Capacity

10ton/day ~ 300ton/day

Special feature

Possible to operate combustion

condition and combustion temperature

stably.

(Suitable for thermal energy supply)

Gasification

Hospital Waste Gasification Incinerator Plant

Dewatered

Biosolids

Thermal

Dryers Fluidized

Bed

Gasification

System

95%

Syngas

5% Char

Alternate

Energy

Uses

inputs Process Outputs

SRF Gasification Incinerator Plant

POSH

17Company Status / Business Area


Waste generation systems generally consist of incinerator , waste heat boiler and power generation system.

The steam from the boiler is stored in the high pressure steam header. The steam is fed into the steam turbine

then electricity is generated.

Steam that consumes energy while passing through steam turbine is collected from steam condenser, stored

in condensate tank, and then dissolved oxygen in water is removed from deaerator and water is supplied to

boiler.

When the turbine is stopped, the steam is collected from the high-pressure steam condenser and returned

to the condensate tank.

MSW power generation system(Stoker type)

Municipal waste stoker type power generation facility

POSH

18

Energy & Power Plant

Biomass power generation system (gas engine type)

MSW power generation system(Gasification type)

Solid fuel gasification power plant

Municipal Solid Waste Solid Fuel Production (RDF, SRF)

POSH

19Company Status / Business Area

제25회 태성 ANSYS USER MEETING10


Waste Energy Conversion converts wastes into fuels and energy, which are classified into physical,

thermal, and biological technologies, depending on how they are treated.

Solid waste fuel, pyrolysis oil, waste gas, and landfill gas are used as power generation energy

sources among the fuels produced by waste energy technology, and bioethanol is attracting atten-

tion as environmentally friendly transportation fuel.

Technology for manufacturing solid fuels by treating combustible waste.

(ex) RDF, RPF, TDF, WCF Manufacturing facility

MBT System

RDF System

POSH

20

Waste energy conversion

Mechnical treatment technology

Thermal treatment technology

Biological treatment technology

Incoming Crushing Sorting Drying Molding

CombustileWaste

Shredder Trommelscreen

Airseperator

Magnetseperator

Compressi onmoldingmachine

Dryer Agitator Pelletisation RDF,RPF,TDF,WCF

Mechnical treatment technology

POSH

21

Thermal Treatment Technology

Waste Tryeor Plastic

Pyrolysis Oil

Hydrocarbon Gas

Charcoal

Polymer waste(PE,PP,PVC,etc) is converted to liquid fuel by pyrolysis under anaerobic

conditions.

Pyrolysis

Incoming Pyrolysis Condensation Refinement

Polymer waste Furnace Pyrolysis furnace Condenser Storage tank Reactor Pyrolysis oil

(Product)

The waste gas generated during incineration of flammable waste is purified

and converted into syngas to be used for power generation.

(ex)Gasification Engine Generation Plant

Gasification(Combustion)

Incoming Gasification Purification

Waste(SRF) Gasifier H/E Dust Collector

(Bag filter)Scrubber Syngas


POSH

22

Biological Treatment Technology

Ethanol is produced by fermenting starch-based crops(sweet potatoes, corn, etc.), sugar

crops, and woody waste(waste paper, waste wood). Ethanol is used as a fuel additive after

distillation.

ex)Bio-ethanol Production Plant.

Fermentation

Incoming Milling Fermenting Fueling

Fuels Milling Machine Tank Distillation

towerFilter Additive

mixing tank

Product

(Bio-ethanol)

Tank

알파아밀라아제효소

클루코아밀라아제효소

Ferm

enta

tion

Bio-butanol production processBiomass

Pre-treatment lignin Product

Hydrolysis Solid-liquid separation Filteration

After collecting landfill gas, it is used for producing electricity after purifying.

ex)Landfill gas plant

Gas collecting

Collecting Purifying

Collecting System Gas Cooler Dryer Compressor FilterLandfill

Gas

Gas C

olle

ctin

g



POSH

23

New&Renewable Energy Sector

Energy that transforms existing fossil fuels or converts renewable energy, including sunlight,

water, geothermal, precipitation, and biological organisms.

New Energy : Fuel cell, hydrogen, coal liquefaction, gasification

Renewable energy ; sunlight, Solar, heat,Bio, wind force, water power, Ocean, waste, Geothermal

POSH is investing and researching R & D fields such as small hydro power generation, Organic rankine Cycle, organic wastes drying and fuel conversion, and has been doing our best to become the world standard.

Small hydro power generation(Scroll turbine)

The energy of a drop of water entering the scroll aberration is not released until it is completely destroyed

The most important equipment of small hydro power system is water turbine.In order to improve the economic

efficiency, the selection of water turbine to the characteristics of the plant should be prioritized.

Scroll is a whirlpool. Scroll aberration turbine is a hydro turbine with two scrolling parts. By relatively moving

to obtain the rotational force, although the principle has been known for a long time, it can not be put to prac-

tical use due to difficulties in manufacturing, It has been put into practical use due to development of working

techniques and applied to a compressor and expander manufacturing technology.

POSH

24

ORC(Organic Rankine Cycle)

Waste Incinerator Plant Ironworks Landfill Gas Plant

ORC(Organic Rankine Cycle) is the waste heat from internal combustion engines and industrial processes, which

generates electricity by heating the refrigerant that evaporates at a lower temperature than water.It has the advantage

of reducing greenhouse gas emissions by increasing fuel efficiency.

• Inexpensive heat of medium-low temperature (<300 ° C) makes ORC generation more economical than steam

generator

• Steel plant, cement and paper mill, textile, food processing plant, garbage incinerator, cogeneration plant,

ship exhaust gas etc.


POSH

25

Sludge Drying and Fuel production System (Vaporization Drying)

Sewage sludge is treated economically and hygienically, and the latest technology of machineries drying facility is applied for the production of sludge fuel.Considering the latest design, construction and operation, we will create the best sludge drying facility and sludge fuel production facility.

This saves energy costs, reduces government fossil energy use, and reduces carbon dioxide emissions.The main mechanism of the drying process is that the high temperature of the waste oil with a low specific heat and the high activity of the waste oil vapor increase the internal pressure by the temperature increase of the sludge moisture and evaporation phenomenon of the water vapor.As a result, the structure of the internal pore, which serves as a mass transfer passage between the moisture inside the sludge and the external steam, is maximized.

Therefore, the increase in the pressure of steam and the expansion of the distribution channel exerts the water vapor to the outside, and the negative pressure inside the sludge temporarily formed thereby smoothes the internal inflow of the oil vapor to help the absorption / adsorption process.



POSH

26

Overseas Business

GLOBAL PYROTEC CO.,LTD.

From waste incineration plant to power generation plant, we are actively doing business in environment and

new renewable energy.

Udon Thani, Thailand

MSW Power Plant

Mandaue, Philippines

RDF Power Plant

Company

Address

Tel

Service

GLOBAL PYROTEC CO.,LTD.

33S/34S, 47 MT&T BUILDING 3F, SUKHUMVIT 69, PHRAKHANONG-NUA, WATTANA,

BANGKOK 10110

+66-2-006-1457

Environment plant and New renewable energy

Bangkok office, Thailand


POSH strives to establish a world-class energy research system. Excellent research

personnel and bold based on our investment, we are striving to develop high efficiency and

environmentally-friendly technologies.

We are developing waste heat recycling, small hydro power, and so on.

POSH is a world leader in research. We will lead the energy industry.

Scroll is a whirlpool. Scroll aberration turbine is a

hydro turbine with two scrolling parts.

By relatively moving to obtain the rotational force,

although the principle has been known for a long

time, it can not be put to practical use due to diffi-

culties in manufacturing.

It has been put into practical use due to develop-

ment of working techniques and applied to a

compressor and expander manufacturing tech-

nology.

Scroll turbine

ORC/ Waste heat recycling generator

We are developing 'waste gasification technology' which is a recycling technology of waste. An oxidizer was supplied to the waste to heat 850 ℃.The synthesis gas produced is produced from synthesis gas which can drive the engine and turbine through chemical reaction.Unlike the conventional method of making elec-tricity using heat from burning garbage, to pro-duce syngas. Through this, environmental pollution caused by landfill and incineration is reduced, It has the effect of increasing the economic efficiency based on high power generation efficiency.

ORC is a power generation system that uses solvents to produce steam. This is a method of ejecting a solvent that vaporizes at low tempera-tures using an expander.Since the solvent boils at a much lower tempera-ture than water, a generator is able to be worked by recovered the exhaust gas of diesel engine or/and waste heat from the incinerator.Heat generated after power generation can also be used for building heating(60~70'C).POSH strive to the development of waste heat recycling power generation system using scroll turbine.

Gasification power generation

POSH

27

R&D


ABS BV CSWIP 신국환

CSWIP 이상호 DNV-GL LR

OHSAS 18001:2007 ISO 9001:2009

POSH

28

Certification Status


2005 2006

2014 –PIPE 2015 –PIPE

DSME partner evaluation

“Grand Prize”

A Prize from DSME

2010-BLOCK 2011-PIPE

2012-PIPE 2013-BLOCK

DSME partner evaluation

“Excellence Award”

2010-BLOCK

A Prize From CHVRONTEXACO (2004,10,15) A Prize From CABGOC (2008,04,05)

H6044 MANIFOLDProject

Award FromDONG HEJRE2014.06.16

Award FromStatoil Gina Krog2015.01.21

POSH

29

Awards Status

Head Office (Pipe spool manufacturing)Address : 5330-4, Geoje-daero, Sadeung-myeon, Geoje-si, Gyeongsangnam-doTel : +82-55-636-1964 Fax : +82-55-636-1955

Sacheon Office (Offshore plant, Ship block)Address : 90, Sinhangman 1-gil, Sacheon-si, Gyeongsangnam-doTel : +82-55-835-7808 Fax : +82-55-835-7810

Seoul Office (Onshore plant, Environmental plant)Address : No. 1007 , 358-25, Hosu-ro, Ilsandong-gu, Goyang-si, Gyeonggi-do, Republic of KoreaTel : +82-31-932-9347 Fax : +82-31-932-9348

Documents

Shipbuilding equipment / Offshore plant