Shimadzu Electronic Balances General Catalog

Shimadzu Electronic Balances G

eneral Catalog

Shimadzu Electronic BalancesGeneral Catalog

C054-E032N

Printed in Japan 4595-01203-50ANS

Company names, product/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation or its affiliates, whether or not they are used with trademark symbol “TM” or “®”.Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services. Shimadzu disclaims any proprietary interest in trademarks and trade names other than its own.

For Research Use Only. Not for use in diagnostic procedures. The contents of this publication are provided to you “as is” without warranty of any kind, and are subject to change without notice. Shimadzu does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.

© Shimadzu Corporation, 2012www.shimadzu.com/an/

SHIMADZU

ELECTRONIC BALANCESProfessional in Measurement

SHIMADZU


1939 Large-Capacity Balance

1958 Type L Direct-Reading Balance

1950 DODIQ Direct-Reading Balance

1960

AL-3 Automatic Direct-Reading Balance

1965 AL-7 Automatic Direct-Reading Balance

1967 LU-T1100 Top-loading Direct-Reading Balance

1970 AL-8 Automatic Direct-Reading Balance (All-digital display)

1971 Digibalance D-1003 Electronic Balance

1973 C-160 Direct-Reading Carat Balance

1976 NL-200P Direct-Reading Balance

1981 EB-2800M Electronic Animal Balance

1985 AEL-200 Electronic Analytical Balance (Full-range electro-magnetic)

1985 PSC Fully-Automatic Calibration Based on Temperature Change Detection

1989 EB-K Precision Platform Balances with OPF (later renamed UniBloc)

1993 AEM-5200 Micro Balance

1997 First Electronic Balances with WindowsDirect

2003 New UniBloc Balance Line-up

2004 MOC-120HUniBloc Moisture Balance

2007 TX/TXBUniBloc Top-Loading Balance

2010 ATX/ATYUniBloc Analytical Balance

1981 AEL-160 Electronic Analytical Balance

1930

1940

1950

1960

1970

1980

1990

2000

1918 Commence Tortion Balance and Top-pan Balance production

Establishment of SHIMADZU CORPORATION

1930 Model 5 Chemical Balance

18751920

2011 MOC63uUniBloc Moisture Balance

SHIMADZU


SHIMADZU


1939 Large-Capacity Balance

1958 Type L Direct-Reading Balance

1950 DODIQ Direct-Reading Balance

1960

AL-3 Automatic Direct-Reading Balance

1965 AL-7 Automatic Direct-Reading Balance

1967 LU-T1100 Top-loading Direct-Reading Balance

1970 AL-8 Automatic Direct-Reading Balance (All-digital display)

1971 Digibalance D-1003 Electronic Balance

1973 C-160 Direct-Reading Carat Balance

1976 NL-200P Direct-Reading Balance

1981 EB-2800M Electronic Animal Balance

1985 AEL-200 Electronic Analytical Balance (Full-range electro-magnetic)

1985 PSC Fully-Automatic Calibration Based on Temperature Change Detection

1989 EB-K Precision Platform Balances with OPF (later renamed UniBloc)

1993 AEM-5200 Micro Balance

1997 First Electronic Balances with WindowsDirect

2003 New UniBloc Balance Line-up

2004 MOC-120HUniBloc Moisture Balance

2007 TX/TXBUniBloc Top-Loading Balance

2010 ATX/ATYUniBloc Analytical Balance

1981 AEL-160 Electronic Analytical Balance

1930

1940

1950

1960

1970

1980

1990

2000

1918 Commence Tortion Balance and Top-pan Balance production

Establishment of SHIMADZU CORPORATION

1930 Model 5 Chemical Balance

18751920

2011 MOC63uUniBloc Moisture Balance

P 24 - Specific Gravity Measurement Kits

P 24 - Animal Balances

P 25 - Optional Accessories

P 28 - Physical Dimensions

SHIMADZUELECTRONIC BALANCES

SHIMADZU: A Tradition of Weighing Expertise

P 08 - Features and Symbols

P 10 - UniBloc Analytical Balances

P 14 - UniBloc Top-Loading Balances

P 18 - UniBloc Precision Platform Balances

P 19 - Analytical Balances

P 19 - Top-Loading Balances

P 20 - Portable Electronic Balances

P 21 - UniBloc Electronic Moisture Balances

Contents

P 08 - Quick reference by capacity andminimum display

P 06 - Excellent performance for multiple industries

Shimadzu Corporation was established in 1875 in Kyoto, Japan, as one of the pioneers of scientific precision instruments.

Top-pan and torsion balance production started in 1918,and equal-beam analytical balances were introduced in 1925. Since their release, the continuous improvement of Shimadzu balances has contributed to research and development across all industries.

Around the turn of the 20th Century, precision weighing was a time-consuming practice performed only by experienced operators. Placing the sample and small masses on pans hung from a beam scale with a moving indicator was a tedious process. Shimadzu strove continuously to streamline weighing procedures. The introduction of the direct reading analytical balance (patented in Japan in 1948) signified a new era in weighing technology. In the Type L balance, the sensitive mass-loading work was replaced by convenient dial operations.Users reduced weighing time by 66%, and consequently reduced demand for conventional balances. Shimadzu then added the top-loading direct reading balance with Roberval’s mechanism in 1959. Until recently many of these instruments were still utilized in modern laboratories.

Shimadzu continued to pioneer new technologies, releasing its first electronic balance in 1971—the Digibalance.This release marked a milestone in precision weighing, introducing simplicity and ease of use to analytical weighing.Six years later (1977), the application of microprocessors in electronic balances further enhanced weighing performance. The compact ED Series provided substantial improvements in sensitivity, resolution, and stability.

More recently, Shimadzu has introduced user-friendly instruments and features to the market, such as :the temperature-based fully-automatic calibration in 1985,the first one-piece forcecell (OPF, later renamed UniBloc) in 1989, the high-sensitivity AEM-5200 Micro Balance in 1993,and the unique WindowsDirect feature perfectly suited for the computerized laboratory of the 21st Century.

Moving forward, Shimadzu is committed to providing innovative products for the analytical marketplace.

One of the latest achievements is MOC63u series,High-performance Moisture Analyzer with advantages of UniBloc and applicable for a wide application area.

Excellent performance for a wide variety ofapplications in multiple industries

Food. Quality Assurance . Harvest Inspection

Chemical. Paint Quality Control. Material Inspection

Environmental. Polluted Sludge Measurement. Biofuel Measurement

Pharmaceutical. Drug Quality Assurance. Cosmetics Inspection

UniBloc Moisture Analyzer

MOC63u debut!!

New Product

AUW/AUX/AUY Series TW/TX/TXB Series BW-K/BX-K SeriesUW/UX Series

P 24 - Specific Gravity Measurement Kits

P 24 - Animal Balances

P 25 - Optional Accessories

P 28 - Physical Dimensions

SHIMADZUELECTRONIC BALANCES

SHIMADZU: A Tradition of Weighing Expertise

P 08 - Features and Symbols

P 10 - UniBloc Analytical Balances

P 14 - UniBloc Top-Loading Balances

P 18 - UniBloc Precision Platform Balances

P 19 - Analytical Balances

P 19 - Top-Loading Balances

P 20 - Portable Electronic Balances

P 21 - UniBloc Electronic Moisture Balances

Contents

P 08 - Quick reference by capacity andminimum display

P 06 - Excellent performance for multiple industries

Shimadzu Corporation was established in 1875 in Kyoto, Japan, as one of the pioneers of scientific precision instruments.

Top-pan and torsion balance production started in 1918,and equal-beam analytical balances were introduced in 1925. Since their release, the continuous improvement of Shimadzu balances has contributed to research and development across all industries.

Around the turn of the 20th Century, precision weighing was a time-consuming practice performed only by experienced operators. Placing the sample and small masses on pans hung from a beam scale with a moving indicator was a tedious process. Shimadzu strove continuously to streamline weighing procedures. The introduction of the direct reading analytical balance (patented in Japan in 1948) signified a new era in weighing technology. In the Type L balance, the sensitive mass-loading work was replaced by convenient dial operations.Users reduced weighing time by 66%, and consequently reduced demand for conventional balances. Shimadzu then added the top-loading direct reading balance with Roberval’s mechanism in 1959. Until recently many of these instruments were still utilized in modern laboratories.

Shimadzu continued to pioneer new technologies, releasing its first electronic balance in 1971—the Digibalance.This release marked a milestone in precision weighing, introducing simplicity and ease of use to analytical weighing.Six years later (1977), the application of microprocessors in electronic balances further enhanced weighing performance. The compact ED Series provided substantial improvements in sensitivity, resolution, and stability.

More recently, Shimadzu has introduced user-friendly instruments and features to the market, such as :the temperature-based fully-automatic calibration in 1985,the first one-piece forcecell (OPF, later renamed UniBloc) in 1989, the high-sensitivity AEM-5200 Micro Balance in 1993,and the unique WindowsDirect feature perfectly suited for the computerized laboratory of the 21st Century.

Moving forward, Shimadzu is committed to providing innovative products for the analytical marketplace.

One of the latest achievements is MOC63u series,High-performance Moisture Analyzer with advantages of UniBloc and applicable for a wide application area.

Excellent performance for a wide variety ofapplications in multiple industries

Food. Quality Assurance . Harvest Inspection

Chemical. Paint Quality Control. Material Inspection

Environmental. Polluted Sludge Measurement. Biofuel Measurement

Pharmaceutical. Drug Quality Assurance. Cosmetics Inspection

UniBloc Moisture Analyzer

MOC63u debut!!

New Product

AUW/AUX/AUY Series TW/TX/TXB Series BW-K/BX-K SeriesUW/UX Series

Shimadzu Electronic BalancesGeneral Catalog 76

Excellent performance for multiple industriesCapacity/Minimum display

•••

•••

•••

•••

••

Sample preparation in R&D laboratories

Quality assurance of drugs

Material inspection

Quality assurance of processed food

Inspection for harvest before export

Packaging final products

Reagent preparations

Manufacturing process inspection

Piece counting for small parts in factories

Measurement of thin film on the surface of silicon wafer

Pass/fail by checkweighing

Jewelry making

In retail shop

Purity check

AUW220D

P.10

Capacity: 1020gMinimum Display: 0.001g


Capacity: 60gMinimum Display: 0.001g/0.01%

Capacity: 220g/82gMinimum Display: 0.1mg/0.01mg

Pharmaceuticalindustry

TX3202L

P.16

MOC63u

P.22

Foodindustry

AUW220

P.12

Chemicalindustry

Electronic and semiconductor

Jewelry market

TX323L

P.17

ATX224

P.13

BL320H

P.19

UX420H TXB622L

P.14 P.17

MOC63u

P.22

AUW220

P.12

UW1020H UW6200H

P.14

UX420H

P.14

UX420H

P.14

TX323L

P.16

TXC623L / TWC623L

P.17

ELB300

P.20

Capacity: 220gMinimum Display: 0.1mg


UX4200HCapacity: 4200gMinimum Display: 0.01g



Capacity: 620ctMinimum Display: 0.001ct


TX3202LCapacity: 3200gMinimum Display: 0.01g













MOC63u

P.22


Excellent performance for multiple industriesCapacity/Minimum display

•••

•••

•••

•••

••

Sample preparation in R&D laboratories

Quality assurance of drugs

Material inspection

Quality assurance of processed food

Inspection for harvest before export

Packaging final products

Reagent preparations

Manufacturing process inspection

Piece counting for small parts in factories

Measurement of thin film on the surface of silicon wafer

Pass/fail by checkweighing

Jewelry making

In retail shop

Purity check

AUW220D

P.10




Capacity: 220g/82gMinimum Display: 0.1mg/0.01mg

Pharmaceuticalindustry

TX3202L

P.16

MOC63u

P.22

Foodindustry

AUW220

P.12

Chemicalindustry

Electronic and semiconductor

Jewelry market

TX323L

P.17

ATX224

P.13

BL320H

P.19

UX420H TXB622L

P.14 P.17

MOC63u

P.22

AUW220

P.12

UW1020H UW6200H

P.14

UX420H

P.14

UX420H

P.14

TX323L

P.16

TXC623L / TWC623L

P.17

ELB300

P.20






Capacity: 620ctMinimum Display: 0.001ct















MOC63u

P.22


Quick reference by capacity and minimum display

REDUCE MANUAL CALIBRATION WORK

Features and Symbols

Fully automated feature initiates self-calibration at set time intervals, using motor-driven internal calibration weight. Up to three automatic calibrations per day may be pre-set to coincide with work schedules or to meet specific quality goals.

Clock-CAL

Calibration can be performed any time with a simple push-button operation.Internal Calibration

Single lever operation loads and unloads built-in calibration weight.One-lever CAL

The balance self-calibrates when it detects temperature changes that would affect accuracy. Operator is released from constantly monitoring surrounding conditions.

Perfect Self CalibrationGLP, GMP, AND ISO9000 CONFORMANCE

APPLICATION SPECIFIC FEATURES

Date and time can be readily supplied by the balance.Built-in ClockD

Weighed result is directly typed at the cursor position of any application on Windows® OS. No communication software is required.

WindowsDirect (See p.9)L

RS-232C interface is a standard feature.Built-in RS-232C InterfaceM

OTHER FEATURES

Piece counting function is a standard feature.Piece Counting Mode

With optional printer connected to the balance, calibration reports which meet the requirements of GLP, GMP, and ISO9000 can be produced.

Calibration ReportiPortable for use in the field.Dry Battery Operation

Experience it!

• Press the [PRINT] key on the balance.

• Place the cursor at the desired position in your Windows application.

• The weighed result will be directly typed there.

Test sample A

060315-07Sent as if typed from the computer keyboard !

Any application on Windows® :e.g. Excel, Word etc.

7.80315

All that you need to add is just one cable!No communication software is required!

Test sample A

060315-07

Press [PRINT] key (1

(2

Measurement beneath the balance is possible.Standard Below-weigh Hook

Data can be automatically output at pre-set time intervals.Interval Timer Output4

Data can be automatically output as each measurement is made.Auto Print

f

A

B

c

O

Allows viewing of remaining capacity.Analog Bar Graph DisplayG

Software for specific gravity measurement is pre-installed. Simply add optional specific gravity kit for efficient measurements.

Specific Gravity MeasurementP

Utilized in quality control applications.Checkweighingu

.

Single-block technology brings high performance and durability.UniBloc

Easy to read in any environment.Backlight/

All metal construction for high durability.All-metal HousingR

Best fit to weighing applicationEasy Setting

Easy to operate key layoutMenu Operation Key

Top-loading BalancesUW/UX Series (P.14)TW/TX/TXB/TWC/TXC (P.16 and P.17)BL Series (P.19)

AnalyticalBalances (P.12, P.13 and P.19)

Semi-microBalances (P.11)

Portable ElectronicBalances (P.20)

PrecisionPlatform Balances (P.18)

Minimum display

30g

50g

100g

200g

300g

400g

600g

1200g

2000g

3000g

4000g

6000g

10000g

*Dual-range models appearing twice for both ranges.

UniBloc Family of Balances

Capacity

0.01mg 0.1mg 0.001g 0.01g 0.1g

AUW120D*

AUW220D* ATX84ATY64

AUW120D*AUW/AUX/AUY120AW/AX/AY120ATX/ATY124

AUW220D*AUW/AUX/AUY220ATX/ATY224AW/AY220AX200

AUW/AUX320AW320

UW/UX220HBL220HTX/TW223L

BL320HTX/TW323L

UW/UX420HTX/TW423L

UW/UX620HUW/UX820HUW/UX1020H

ELB300BL320S

UW/UX420STXB422L

BL620STXB622LUW/UX820S

UW/UX2200HBL2200HTX2202L

ELB600TXB621L

TXB2201L

UW/UX4200HTX4202L

UW/UX6200H

TXB4201L

TXB6201L

ELB600S

ELB1200

ELB2000

BW/BX12KHBW/BX22KHBW/BX32KH

ELB3000BL3200S

UW/UX4200S

UW/UX8200S

BL3200HLBL3200HTX3202L

ELB120

ELB200TXB222L

ELB12KBW/BX32KSBW/BX52KS

ELB6000STXB6200L

WindowsDirect1g

If you'd like to use "WindowsDirect" with "Windows 7" "Windows Vista", or USB port, please contact to our distributors.

(

(


Quick reference by capacity and minimum display

REDUCE MANUAL CALIBRATION WORK

Features and Symbols

Fully automated feature initiates self-calibration at set time intervals, using motor-driven internal calibration weight. Up to three automatic calibrations per day may be pre-set to coincide with work schedules or to meet specific quality goals.

Clock-CAL

Calibration can be performed any time with a simple push-button operation.Internal Calibration

Single lever operation loads and unloads built-in calibration weight.One-lever CAL

The balance self-calibrates when it detects temperature changes that would affect accuracy. Operator is released from constantly monitoring surrounding conditions.

Perfect Self CalibrationGLP, GMP, AND ISO9000 CONFORMANCE

APPLICATION SPECIFIC FEATURES

Date and time can be readily supplied by the balance.Built-in ClockD

Weighed result is directly typed at the cursor position of any application on Windows® OS. No communication software is required.


RS-232C interface is a standard feature.Built-in RS-232C InterfaceM

OTHER FEATURES

Piece counting function is a standard feature.Piece Counting Mode

With optional printer connected to the balance, calibration reports which meet the requirements of GLP, GMP, and ISO9000 can be produced.

Calibration ReportiPortable for use in the field.Dry Battery Operation

Experience it!

• Press the [PRINT] key on the balance.

• Place the cursor at the desired position in your Windows application.

• The weighed result will be directly typed there.

Test sample A

060315-07Sent as if typed from the computer keyboard !

Any application on Windows® :e.g. Excel, Word etc.

7.80315

All that you need to add is just one cable!No communication software is required!

Test sample A

060315-07

Press [PRINT] key (1

(2

Measurement beneath the balance is possible.Standard Below-weigh Hook

Data can be automatically output at pre-set time intervals.Interval Timer Output4

Data can be automatically output as each measurement is made.Auto Print

f

A

B

c

O

Allows viewing of remaining capacity.Analog Bar Graph DisplayG

Software for specific gravity measurement is pre-installed. Simply add optional specific gravity kit for efficient measurements.

Specific Gravity MeasurementP

Utilized in quality control applications.Checkweighingu

.

Single-block technology brings high performance and durability.UniBloc

Easy to read in any environment.Backlight/

All metal construction for high durability.All-metal HousingR

Best fit to weighing applicationEasy Setting

Easy to operate key layoutMenu Operation Key

Top-loading BalancesUW/UX Series (P.14)TW/TX/TXB/TWC/TXC (P.16 and P.17)BL Series (P.19)

AnalyticalBalances (P.12, P.13 and P.19)

Semi-microBalances (P.11)

Portable ElectronicBalances (P.20)

PrecisionPlatform Balances (P.18)

Minimum display

30g

50g

100g

200g

300g

400g

600g

1200g

2000g

3000g

4000g

6000g

10000g

*Dual-range models appearing twice for both ranges.

UniBloc Family of Balances

Capacity

0.01mg 0.1mg 0.001g 0.01g 0.1g

AUW120D*

AUW220D* ATX84ATY64

AUW120D*AUW/AUX/AUY120AW/AX/AY120ATX/ATY124

AUW220D*AUW/AUX/AUY220ATX/ATY224AW/AY220AX200

AUW/AUX320AW320

UW/UX220HBL220HTX/TW223L

BL320HTX/TW323L

UW/UX420HTX/TW423L

UW/UX620HUW/UX820HUW/UX1020H

ELB300BL320S

UW/UX420STXB422L

BL620STXB622LUW/UX820S

UW/UX2200HBL2200HTX2202L

ELB600TXB621L

TXB2201L

UW/UX4200HTX4202L

UW/UX6200H

TXB4201L

TXB6201L

ELB600S

ELB1200

ELB2000

BW/BX12KHBW/BX22KHBW/BX32KH

ELB3000BL3200S

UW/UX4200S

UW/UX8200S

BL3200HLBL3200HTX3202L

ELB120

ELB200TXB222L

ELB12KBW/BX32KSBW/BX52KS

ELB6000STXB6200L

WindowsDirect1g


(

(

UniBloc Analytical BalancesAUW-D series dual-range semi-micro balancesAUW/AUX/AUY seriesATX/ATY series

UniBloc Top-loading BalancesUW/UX/ TW/ TWC/ TX/ TXC series

UniBloc Precision Platform BalancesBW-K/BX-K series

UniBloc Electronic Moisture BalancesMOC-120H/MOC63u

AUW-D series dual-range semi-micro balancesAUW/AUX/AUY series analytical balances

Excellent Weighing PerformanceCompact UniBloc mechanism and digital processing technology

produce fast response and stability at the same time.

Microprocessor digital control can be set to automatically

provide the most suitable data processing for the installation

environment and weighing application.

•

•

For ApplicationShimadzu’s unique WindowsDirect is a standard feature for all the

UniBloc Analytical Balances.

Measurement results can be transmitted to Excel or other Windows

applications without any software installation to your computer.

All you have to add is one RS-232C cable.


Piece counting, various mass units, below-weigh hook, specific

gravity measurement software are all standard features.

•

•

WindowsDirect works with Windows® 95, 98, NT4.0, 2000, ME and XP.PC must be IBM PC/AT compatible.

User-friendly FeaturesWeighing work is made easy by the smooth door movement.

It is easy to remove and replace the door rails for cleaning.

The embossed key panel sheet provides clear clicking

response as operated. The key operations can be confirmed

with a gentle beeping sound, too.

Level adjustment can be performed with ease.

•

•

•

Excellent response, stability and zero return performance – in a semi-micro balance.Choose one of the two models according to your field requirements.

Operator can choose from two types of fully-automatic span calibration methods. “PSC” is initiated based on

temperature change detection, and “Clock-CAL” operates at user pre-set times (up to three times a day).

Calibration report can be automatically printed out with the optional electronic printer.

Date and time are also output to meet GLP/GMP/ISO requirements.

Choice of fully-automatic calibrations: PSC and Clock-CAL

GLP/GMP/ISO calibration report

Weighed data can be directly typed into any Windows application and no interface software is required.

If you'd like to use "WindowsDirect" with "Windows 7" "Windows Vista", or USB port, please contact to our

distributors.

WindowsDirect (See p.9)

Model Capacity Minimum display Pan size(mm) Internal calibration Internal calibration modes WindowsDirect

AUW220D 220g/82g 0.1mg/0.01mg 80 dia PSC, Clock-CAL, any time with key touch


Dual-range semi-micro balances

AUW-D Series

AUW-D dual-range semi-micro balances are the first five-decimal balances with the advantages of UniBloc one-piece force cell technology.

fABiDLMOGP�4�R

fA

i

LOne piece force cell patented in USA in 1989, No. 4799561, in China in 1991, No. 12729, in Japan in 1995, No. 1905686

Restrainedsensitivity

error band

Sens

itivi

ty e

rror

0

Ambient temperature change

Ambient temperature

CalibrationsFully-automatic calibration

SET

SET

SET8:00 12:30 17:30

✓

✓

✓

✓

Shimadzu introduced one piece force cell technology for precision

balances in 1989. Today’s UniBloc is created by high-precision

electric discharge wire processing applied to a block of aluminum

alloy, and replaces the conventional electro-magnetic balance

sensor assembly. UniBloc’s compact, uniform structure ensures

stable temperature characteristics, excellent response time and

stable corner-load performance. The UniBloc design permits a

consistancy of production that assures reliability and a long

operational life.

The updated UniBloc technology expanded the UniBloc balance

line up, which now ranges from semi-micro with minimum display

of 0.01 mg to precision platform balances up to 52 kg in capacity.

Reliability

Stability Response


UniBloc Family of Balances UniBloc Analytical Balances

UniBloc Analytical BalancesAUW-D series dual-range semi-micro balancesAUW/AUX/AUY seriesATX/ATY series

UniBloc Top-loading BalancesUW/UX/ TW/ TWC/ TX/ TXC series

UniBloc Precision Platform BalancesBW-K/BX-K series

UniBloc Electronic Moisture BalancesMOC-120H/MOC63u

AUW-D series dual-range semi-micro balancesAUW/AUX/AUY series analytical balances

Excellent Weighing PerformanceCompact UniBloc mechanism and digital processing technology

produce fast response and stability at the same time.

Microprocessor digital control can be set to automatically

provide the most suitable data processing for the installation

environment and weighing application.

•

•

For ApplicationShimadzu’s unique WindowsDirect is a standard feature for all the

UniBloc Analytical Balances.

Measurement results can be transmitted to Excel or other Windows

applications without any software installation to your computer.

All you have to add is one RS-232C cable.


Piece counting, various mass units, below-weigh hook, specific

gravity measurement software are all standard features.

•

•

WindowsDirect works with Windows® 95, 98, NT4.0, 2000, ME and XP.PC must be IBM PC/AT compatible.

User-friendly FeaturesWeighing work is made easy by the smooth door movement.

It is easy to remove and replace the door rails for cleaning.

The embossed key panel sheet provides clear clicking

response as operated. The key operations can be confirmed

with a gentle beeping sound, too.

Level adjustment can be performed with ease.

•

•

•

Excellent response, stability and zero return performance – in a semi-micro balance.Choose one of the two models according to your field requirements.

Operator can choose from two types of fully-automatic span calibration methods. “PSC” is initiated based on

temperature change detection, and “Clock-CAL” operates at user pre-set times (up to three times a day).

Calibration report can be automatically printed out with the optional electronic printer.

Date and time are also output to meet GLP/GMP/ISO requirements.

Choice of fully-automatic calibrations: PSC and Clock-CAL



If you'd like to use "WindowsDirect" with "Windows 7" "Windows Vista", or USB port, please contact to our

distributors.


Model Capacity Minimum display Pan size(mm) Internal calibration Internal calibration modes WindowsDirect



Dual-range semi-micro balances

AUW-D Series

AUW-D dual-range semi-micro balances are the first five-decimal balances with the advantages of UniBloc one-piece force cell technology.

fABiDLMOGP�4�R

fA

i

LOne piece force cell patented in USA in 1989, No. 4799561, in China in 1991, No. 12729, in Japan in 1995, No. 1905686


error band

Sens

itivi

ty e

rror

0


Ambient temperature

CalibrationsFully-automatic calibration

SET

SET

SET8:00 12:30 17:30

✓

✓

✓

✓

Shimadzu introduced one piece force cell technology for precision

balances in 1989. Today’s UniBloc is created by high-precision

electric discharge wire processing applied to a block of aluminum

alloy, and replaces the conventional electro-magnetic balance

sensor assembly. UniBloc’s compact, uniform structure ensures

stable temperature characteristics, excellent response time and

stable corner-load performance. The UniBloc design permits a

consistancy of production that assures reliability and a long

operational life.

The updated UniBloc technology expanded the UniBloc balance

line up, which now ranges from semi-micro with minimum display

of 0.01 mg to precision platform balances up to 52 kg in capacity.

Reliability

Stability Response


UniBloc Family of Balances UniBloc Analytical Balances

Analytical Balances

ATX

ATX/ATY Series

ATY

Automated calibration can be started by pressing keys. (ATX series)

Also, your external calibration weights can be used for span calibration. (All models)

Touch-key calibrationB

Quickly adjust the desired ratio of stability and response for every application, even during

measurement, with one-touch operation.

Easy Setting Best fit to weighing application

Unit weights of up to 5 different samples can be easily entered, stored and recalled for use.

Expanded Piece Counting functionO

Compare samples to target values or pass/fail criteria and clearly indicate the results.

Comparator functionu

Convenient for making many measurements of minute samples and seeking the total mass.

Formulation mode

It enables the use of a large flask. (91 dia)

Very large size pan

Send balance data to Excel or other Windows applications without any data

communication software installation required. By combining standard AutoPrint functions

with typical spreadsheet functions, even difficult applications can be easily automated

*I/O–RS cable is needed.

WindowsDirect Communication FunctionL

Analytical Balances

AUW

AUW/AUX/AUY Series

Static Remover STABLO-EX (p.25)

AUW/AUX/AUY models are the single-range analytical balances engineered with the UniBloc technology. This provides especially fast response and superb stability.

High specification and low cost with UniBloc.

AUX

AUY

Calibration carried out at user-preset times (up to three times a day).

Operators can work without unexpected interruptions.

Meets requirements of GLP/GMP/ISO9000. Calibration reports can be output with date and time,

provided by the built-in clock.

Calibration is carried out when temperature change has been detected.

Clock-CAL, fully-automatic calibration (AUW model only)

PSC, fully-automatic calibration (AUW/AUX models)

GLP/GMP/ISO calibration report (AUW/AUX models)

Weighed data can be directly typed into any Windows application and no

interface software is required. If you'd like to use "WindowsDirect" with

"Windows 7" "Windows Vista", or USB port, please contact to our distributors.


LCD with backlight can be read with ease and comfort under any lighting

condition.

Backlight LCD (AUW model only)

Model Capacity Minimum display Pan size (mm) Internal calibration Internal calibration modes WindowsDirect

AUW320 320 g 0.1 mg 80 dia PSC, Clock-CAL, any time with key touch



AUX320 320 g 0.1 mg 80 dia PSC, any time with key touch



AUY220 220 g 0.1 mg 80 dia

AUY120 120 g 0.1 mg 80 dia

fBiDLMOGP�4�RLMOGP��R

f

A

i

L

/

Model Capacity Minimum display Pan Size (mm) approx. Main Body Dimensions (mm) approx. Weight (kg) approx. Power Requirement Internal Calibration

82 g 0.1mg 91 dia

120 g 0.1mg 91 dia

220 g 0.1mg 91 dia

6.2

6.2

6.2

62 g 0.1mg 91 dia

120 g 0.1mg 91 dia

220 g 0.1mg 91 dia

6.0

6.0

6.0

12V, 1A

12V, 1A

12V, 1A

12V, 1A

12V, 1A

12V, 1A

ATX84

ATX124

ATX224

ATY64

ATY124

ATY224

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

fABiDLMOGP�4�/R

Data transfer port of AUW/AUX/AUY Series

Data transfer port of ATX/ATY Series

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓✓

✓

✓

✓

✓

✓

Room temperature change

Permissiblesensitivity error

Sensitivity is always below a maximumpermissible error thanks to PSC.


UniBloc Analytical Balances

Analytical Balances

ATX

ATX/ATY Series

ATY

Automated calibration can be started by pressing keys. (ATX series)

Also, your external calibration weights can be used for span calibration. (All models)

Touch-key calibrationB

Quickly adjust the desired ratio of stability and response for every application, even during

measurement, with one-touch operation.

Easy Setting Best fit to weighing application

Unit weights of up to 5 different samples can be easily entered, stored and recalled for use.

Expanded Piece Counting functionO

Compare samples to target values or pass/fail criteria and clearly indicate the results.

Comparator functionu

Convenient for making many measurements of minute samples and seeking the total mass.

Formulation mode

It enables the use of a large flask. (91 dia)

Very large size pan

Send balance data to Excel or other Windows applications without any data

communication software installation required. By combining standard AutoPrint functions

with typical spreadsheet functions, even difficult applications can be easily automated

*I/O–RS cable is needed.

WindowsDirect Communication FunctionL

Analytical Balances

AUW

AUW/AUX/AUY Series

Static Remover STABLO-EX (p.25)

AUW/AUX/AUY models are the single-range analytical balances engineered with the UniBloc technology. This provides especially fast response and superb stability.

High specification and low cost with UniBloc.

AUX

AUY






Clock-CAL, fully-automatic calibration (AUW model only)

PSC, fully-automatic calibration (AUW/AUX models)

GLP/GMP/ISO calibration report (AUW/AUX models)

Weighed data can be directly typed into any Windows application and no

interface software is required. If you'd like to use "WindowsDirect" with

"Windows 7" "Windows Vista", or USB port, please contact to our distributors.


LCD with backlight can be read with ease and comfort under any lighting

condition.

Backlight LCD (AUW model only)

Model Capacity Minimum display Pan size (mm) Internal calibration Internal calibration modes WindowsDirect







AUY220 220 g 0.1 mg 80 dia

AUY120 120 g 0.1 mg 80 dia

fBiDLMOGP�4�RLMOGP��R

f

A

i

L

/

Model Capacity Minimum display Pan Size (mm) approx. Main Body Dimensions (mm) approx. Weight (kg) approx. Power Requirement Internal Calibration

82 g 0.1mg 91 dia

120 g 0.1mg 91 dia

220 g 0.1mg 91 dia

6.2

6.2

6.2

62 g 0.1mg 91 dia

120 g 0.1mg 91 dia

220 g 0.1mg 91 dia

6.0

6.0

6.0

12V, 1A

12V, 1A

12V, 1A

12V, 1A

12V, 1A

12V, 1A

ATX84

ATX124

ATX224

ATY64

ATY124

ATY224

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

213(W) 356(D) 338(H)

fABiDLMOGP�4�/R

Data transfer port of AUW/AUX/AUY Series

Data transfer port of ATX/ATY Series

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓✓

✓

✓

✓

✓

✓

Room temperature change

Permissiblesensitivity error

Sensitivity is always below a maximumpermissible error thanks to PSC.


UniBloc Analytical Balances

Automatically outputs data as each measurement is made. Combination with

WindowsDirect makes up a handy weigh-and-record system.

Auto Print

Weighed data can be directly typed into any Windows application and no interface

software is required. If you'd like to use "WindowsDirect" with "Windows 7"

"Windows Vista", or USB port, please contact to our distributors.

LCD with backlight can be read with ease and comfort under any lighting condition.

Backlight LCD/

Weight value can be presented in 22 different units and modes, including percentage,

carat, specific gravity, lb, oz, and others. Users can pre-register any combination of

units depending on their needs. Piece counting function is standard.

Unit coversion and piece counting function

(1) Just place it on the pan

(2) Automatically sent to the cell

All that you need to add is just one cable!

No communication software is required!Available as standard with AUW-D/AUW/AUX/AUY,ATX/ATY, UW/UX, TW/TX/TWC/TXC/TXB,BW-K/BX-K series,MOC-120H, MOC63u

Auto Print and WindowsDirect

UW220H*

UW420H*

UW620H*

UW2200H

UW4200H

UW6200H

UW420S

UW820S

UW4200S

UW8200S

220 g

420 g

620 g

2200 g

4200 g

6200 g

420 g

820 g

4200 g

8200 g

Small-pan

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Small-pan

Small-pan

Large-pan

Large-pan

108×105

108×105

108×105

170×180

170×180

170×180

108×105

108×105

170×180

170×180

0.001 g

0.001 g

0.001 g

0.01 g

0.01 g

0.01 g

0.01 g

0.01 g

0.1 g

0.1 g

ModelPan size

(mm) approx.MinimumdisplayCapacityPan type

*Models with minimum display of 0.001 g come with a standard windbreak.

L

UX220H*

UX320G

UX420H*

UX620H*

UX2200H

UX3200G

UX4200H

UX6200H

UX420S

UX820S

UX4200S

UX8200S

220 g

320 g

420 g

620 g

2200 g

3200 g

4200 g

6200 g

420 g

820 g

4200 g

8200 g

Small-pan

Small-pan

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Large-pan

Small-pan

Small-pan

Large-pan

Large-pan

108×105

108×105

108×105

108×105

170×180

170×180

170×180

170×180

108×105

108×105

170×180

170×180

0.001 g

0.001 g

0.001 g

0.001 g

0.01 g

0.01 g

0.01 g

0.01 g

0.01 g

0.01 g

0.1 g

0.1 g

ModelPan size



Top-Loading Balances

UW

UW/UX SeriesLine up!

The new line of Shimadzu top-loading balances are engineered with the UniBloc mechanism resulting in unrivaled response, stability and durability. Powerful features support any imaginable weighing application. UW Series includes internal calibration and fully-automatic calibration functions.

UX

Meets requirements of GLP/GMP/ISO9000. Calibration reports can be output with

date and time, provided by the built-in clock.


Bar graph displayBar graph clearly indicates the total weight (including the tare) as a portion of the balance capacity.

Target weighingSelect a target weight and tolerance. The display clearly indicates when they are reached.

CheckweighingSet an upper and lower threshold. The display continually indicates whether the sample is within the

range “GO”, over range “HI” or under range “LO”. Choose one of two checkweighing bar graph display

modes.

The results can also be output to external devices.

Analog display modesExample of calibration record


PSC, fully-automatic calibration (UW only)



Clock-CAL, fully-automatic calibration (UW only)

iDLMOGP4��u/R

i

Gu

f

A

fABiDLMOGP�4�u/R

UW1020H

UW820H

1020 g

820 g

Small-pan

Small-pan

108×105

108×105

0.001 g

0.001 g

UX1020H

UX820H

1020 g

820 g

Small-pan

Small-pan

108×105

108×105

0.001 g

0.001 g

UW820H/UW1020HUX820H/UX1020H

Data transfer port of UW/UX Series

Large-pan model Small-pan model(minimum display 0.01g)

Small-pan model(minimum display 0.001g)

*The delivered windbreak may differ from the photo



error band

Sens

itivi

ty e

rror

0


Ambient temperature

Calibrations

Fully-automatic calibration

SET

SET

SET8:00 12:30 17:30


UniBloc Top-Loading Balances

Automatically outputs data as each measurement is made. Combination with

WindowsDirect makes up a handy weigh-and-record system.

Auto Print

Weighed data can be directly typed into any Windows application and no interface

software is required. If you'd like to use "WindowsDirect" with "Windows 7"


LCD with backlight can be read with ease and comfort under any lighting condition.

Backlight LCD/

Weight value can be presented in 22 different units and modes, including percentage,

carat, specific gravity, lb, oz, and others. Users can pre-register any combination of

units depending on their needs. Piece counting function is standard.

Unit coversion and piece counting function

(1) Just place it on the pan

(2) Automatically sent to the cell

All that you need to add is just one cable!

No communication software is required!Available as standard with AUW-D/AUW/AUX/AUY,ATX/ATY, UW/UX, TW/TX/TWC/TXC/TXB,BW-K/BX-K series,MOC-120H, MOC63u

Auto Print and WindowsDirect

UW220H*

UW420H*

UW620H*

UW2200H

UW4200H

UW6200H

UW420S

UW820S

UW4200S

UW8200S

220 g

420 g

620 g

2200 g

4200 g

6200 g

420 g

820 g

4200 g

8200 g

Small-pan

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Small-pan

Small-pan

Large-pan

Large-pan

108×105

108×105

108×105

170×180

170×180

170×180

108×105

108×105

170×180

170×180

0.001 g

0.001 g

0.001 g

0.01 g

0.01 g

0.01 g

0.01 g

0.01 g

0.1 g

0.1 g

ModelPan size



L

UX220H*

UX320G

UX420H*

UX620H*

UX2200H

UX3200G

UX4200H

UX6200H

UX420S

UX820S

UX4200S

UX8200S

220 g

320 g

420 g

620 g

2200 g

3200 g

4200 g

6200 g

420 g

820 g

4200 g

8200 g

Small-pan

Small-pan

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Large-pan

Small-pan

Small-pan

Large-pan

Large-pan

108×105

108×105

108×105

108×105

170×180

170×180

170×180

170×180

108×105

108×105

170×180

170×180

0.001 g

0.001 g

0.001 g

0.001 g

0.01 g

0.01 g

0.01 g

0.01 g

0.01 g

0.01 g

0.1 g

0.1 g

ModelPan size




UW

UW/UX SeriesLine up!

The new line of Shimadzu top-loading balances are engineered with the UniBloc mechanism resulting in unrivaled response, stability and durability. Powerful features support any imaginable weighing application. UW Series includes internal calibration and fully-automatic calibration functions.

UX

Meets requirements of GLP/GMP/ISO9000. Calibration reports can be output with

date and time, provided by the built-in clock.




CheckweighingSet an upper and lower threshold. The display continually indicates whether the sample is within the

range “GO”, over range “HI” or under range “LO”. Choose one of two checkweighing bar graph display

modes.

The results can also be output to external devices.

Analog display modesExample of calibration record


PSC, fully-automatic calibration (UW only)



Clock-CAL, fully-automatic calibration (UW only)

iDLMOGP4��u/R

i

Gu

f

A

fABiDLMOGP�4�u/R

UW1020H

UW820H

1020 g

820 g

Small-pan

Small-pan

108×105

108×105

0.001 g

0.001 g

UX1020H

UX820H

1020 g

820 g

Small-pan

Small-pan

108×105

108×105

0.001 g

0.001 g

UW820H/UW1020HUX820H/UX1020H

Data transfer port of UW/UX Series

Large-pan model Small-pan model(minimum display 0.01g)

Small-pan model(minimum display 0.001g)

*The delivered windbreak may differ from the photo



error band

Sens

itivi

ty e

rror

0


Ambient temperature

Calibrations


SET

SET

SET8:00 12:30 17:30



If you don,t operate for a given length time, power (TXB) or display (TX) can be

turned off automatically.

Power saving function

TX223L

TX323L

TX2202L

220 g

2200 g

Small-pan

Large-pan

ø110

167(W)×181(D)

0.001 g

0.01 g

ModelPan size (mm)

approx.MinimumdisplayCapacityPan type

TXB222L

TXB422L

TXB622L

TXB2201L

TXB4201L

TXB6201L

TXB621L

TXB6200L

220 g

420 g

620 g

2200 g

4200 g

6200 g

620 g

6200 g

Small-pan

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Small-pan

Large-pan

ø110

ø110

ø110

ø160

ø160

ø160

ø110

ø160

0.01 g

0.01 g

0.01 g

0.1 g

0.1 g

0.1 g

0.1 g

1 g

ModelPan size (mm)



TX

TW/TX/TXB Series

The beginning of the new standard.Extremely capable, but easy to operate.

TXB

TXB Series

TW/TX Series

Weighed data can be directly typed into any Windows application and no interface software is

required.

If you'd like to use "WindowsDirect" with "Windows 7" "Windows Vista", or USB port, please

contact to our distributors.


i��LMOu�/

TW Bi��LMOu�/

i��LMOu�./

Menu Operation Key Easy to operate key layoutMenu navigation keys are separated from weighing operation keys and arranged in a familiar

5-way navigation circle. Up, Down, Right, Left and Enter are the simple steps of menu operation.

Menu Operation Key

Easy Setting Best fit to weighing applicationQuickly adjust the desired ratio of stability and response for every application, even during

measurement, with one touch operation.provided by the built-in clock.

Easy Setting

Calibration can be performed any time with a simple push-button operation.

Internal Calibration (TW series only)

Battery power the TXB series balances by AC adapter or batteries.Can be used anywhere with battery power (TXB only).

B

TX3202L

TX423L

3200 gLarge-pan 167(W)×181(D)0.01 g

TX4202L 4200 gLarge-pan 167(W)×181(D)0.01 g

TW223L 220 gSmall-pan ø1100.001 g



320 gSmall-pan ø1100.001 g


TXC323L 320 ct

TXC623L 620 ct

80 dia0.001 ct

80 dia0.001 ct

80 dia0.001 ct

80 dia0.001 ct

ModelPan size

(mm) approx.Minimum displayCapacity

Jewelry & Gold Balances

TXC

TWC/TXC/TW/TX/TXB Series

TWC/TXC Series

TXB Series

TX Series

TWC/TXC/TW/TXseries only

i��LMO�/

Weighing gold in a local unitVarious weighing units including Tael (Hong Kong, Taiwan, Singapore, Malaysia, China) plus user-defined unit are available.

Counting coins or partsPiece counting function is standard.

Pass/fail checkweighingAccording to the user-preset thresholds, GO (pass), HI (over) or LO (under) will be displayed.

Production/sales management using computerWindowsDirect function directly types the weighed results to any Windows application you are using

(e.g. Excel) without interface software required. (TX series)

If you'd like to use "WindowsDirect" with "Windows 7" "Windows Vista", or USB port, please contact to

our distributors.

Internal Calibration (TW/TWC series only)


Battery operation (TXB)

TXB may be operated with dry batteries. Suitable for sites where reliable power supply is not available.

*1 If you need PSC or timer calibration, please select UW series.

*2 If a second display is required, please select UX/UW series.

TX

TXB

i��LMOu�/i��LMOu�./

TX223L

TX423L

TX2202L

TX3202L

220 g

420 g

2200 g

3200 g

110 dia

110 dia

167(W)×181(D)

167(W)×181(D)

0.001 g

0.001 g

0.01 g

0.01 g

TX323L 320 g 110 dia0.001 g

TX4202L 4200 g 167(W)×181(D) 0.01 g

TXB222L

TXB422L

TXB622L

TXB2201L

TXB4201L

TXB6201L

TXB621L

TXB6200L

220 g

420 g

620 g

2200 g

4200 g

6200 g

620 g

6200 g

110 dia

110 dia

110 dia

160 dia

160 dia

160 dia

110 dia

160 dia

0.01 g

0.01 g

0.01 g

0.1 g

0.1 g

0.1 g

0.1 g

1 g

ModelPan size


TWC

TWC323L 320 ct

TWC623L 620 ct

TW Bi��LMOu�/

Bi��LMO�/

TW323L

TW223L

320 g

220 g

110 dia

110 dia

0.001 g

0.001 g

TW423L 420 g 110 dia0.001 g

B

.

TW/TX series only

Data transfer port of TWC/TXC/TW/TX Series

Data transfer port of TXB Series



If you don,t operate for a given length time, power (TXB) or display (TX) can be

turned off automatically.

Power saving function

TX223L

TX323L

TX2202L

220 g

2200 g

Small-pan

Large-pan

ø110

167(W)×181(D)

0.001 g

0.01 g

ModelPan size (mm)


TXB222L

TXB422L

TXB622L

TXB2201L

TXB4201L

TXB6201L

TXB621L

TXB6200L

220 g

420 g

620 g

2200 g

4200 g

6200 g

620 g

6200 g

Small-pan

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Small-pan

Large-pan

ø110

ø110

ø110

ø160

ø160

ø160

ø110

ø160

0.01 g

0.01 g

0.01 g

0.1 g

0.1 g

0.1 g

0.1 g

1 g

ModelPan size (mm)



TX

TW/TX/TXB Series

The beginning of the new standard.Extremely capable, but easy to operate.

TXB

TXB Series

TW/TX Series

Weighed data can be directly typed into any Windows application and no interface software is

required.

If you'd like to use "WindowsDirect" with "Windows 7" "Windows Vista", or USB port, please

contact to our distributors.


i��LMOu�/

TW Bi��LMOu�/

i��LMOu�./

Menu Operation Key Easy to operate key layoutMenu navigation keys are separated from weighing operation keys and arranged in a familiar

5-way navigation circle. Up, Down, Right, Left and Enter are the simple steps of menu operation.

Menu Operation Key

Easy Setting Best fit to weighing applicationQuickly adjust the desired ratio of stability and response for every application, even during

measurement, with one touch operation.provided by the built-in clock.

Easy Setting


Internal Calibration (TW series only)

Battery power the TXB series balances by AC adapter or batteries.Can be used anywhere with battery power (TXB only).

B

TX3202L

TX423L

3200 gLarge-pan 167(W)×181(D)0.01 g

TX4202L 4200 gLarge-pan 167(W)×181(D)0.01 g






TXC323L 320 ct

TXC623L 620 ct

80 dia0.001 ct

80 dia0.001 ct

80 dia0.001 ct

80 dia0.001 ct

ModelPan size


Jewelry & Gold Balances

TXC

TWC/TXC/TW/TX/TXB Series

TWC/TXC Series

TXB Series

TX Series

TWC/TXC/TW/TXseries only

i��LMO�/

Weighing gold in a local unitVarious weighing units including Tael (Hong Kong, Taiwan, Singapore, Malaysia, China) plus user-defined unit are available.

Counting coins or partsPiece counting function is standard.

Pass/fail checkweighingAccording to the user-preset thresholds, GO (pass), HI (over) or LO (under) will be displayed.

Production/sales management using computerWindowsDirect function directly types the weighed results to any Windows application you are using

(e.g. Excel) without interface software required. (TX series)

If you'd like to use "WindowsDirect" with "Windows 7" "Windows Vista", or USB port, please contact to

our distributors.

Internal Calibration (TW/TWC series only)


Battery operation (TXB)

TXB may be operated with dry batteries. Suitable for sites where reliable power supply is not available.

*1 If you need PSC or timer calibration, please select UW series.

*2 If a second display is required, please select UX/UW series.

TX

TXB

i��LMOu�/i��LMOu�./

TX223L

TX423L

TX2202L

TX3202L

220 g

420 g

2200 g

3200 g

110 dia

110 dia

167(W)×181(D)

167(W)×181(D)

0.001 g

0.001 g

0.01 g

0.01 g

TX323L 320 g 110 dia0.001 g

TX4202L 4200 g 167(W)×181(D) 0.01 g

TXB222L

TXB422L

TXB622L

TXB2201L

TXB4201L

TXB6201L

TXB621L

TXB6200L

220 g

420 g

620 g

2200 g

4200 g

6200 g

620 g

6200 g

110 dia

110 dia

110 dia

160 dia

160 dia

160 dia

110 dia

160 dia

0.01 g

0.01 g

0.01 g

0.1 g

0.1 g

0.1 g

0.1 g

1 g

ModelPan size


TWC

TWC323L 320 ct

TWC623L 620 ct

TW Bi��LMOu�/

Bi��LMO�/

TW323L

TW223L

320 g

220 g

110 dia

110 dia

0.001 g

0.001 g

TW423L 420 g 110 dia0.001 g

B

.

TW/TX series only

Data transfer port of TWC/TXC/TW/TX Series

Data transfer port of TXB Series




Fully-automatic calibration; PSC (AW only)



Meets requirements of GLP/GMP/ISO9000. Calibration reports can be

output with date and time, provided by the built-in clock.

Clock-CAL function (AW only)


Weighed data can be directly typed into any Windows application and no interface software is required.If you'd like to use "WindowsDirect" with "Windows 7" "Windows Vista", or USB port, please contact to our distributors.


Piece counting function is standard.

Piece counting function

Remaining weighing capacity can be seen

at a glance.

Analog bar graph display

This electro-magnetic precision balance is as compact as a portable scale.

Compact body

Very fast response for operator comfort and efficiency.

Quick response

Automatic unit conversion at the push of a button.

Carat, and other units are standard.

Unit conversion

Analytical Balances

AW

AW/AX/AY Series

BL Series

AX

AY

/��OG

Small-pan model BL3200HL

AW120 120 g 0.1 mg 80 dia PSC, Clock-CAL, any time with key



AX120 120 g 0.1 mg 80 dia any time with key touch


AY120 120 g 0.1 mg 80 dia AY220 220 g 0.1 mg 80 dia

WindowsDirect

Minimumdisplay

Pan size(mm)

InternalcalibrationModel Capacity

BL3200HLonly

High-resolution balances made affordable

Small-pan modelwith windbreak

BL220H *

BL320H *

BL2200H

BL3200H

BL3200HL

BL320S

BL620S

BL3200S

220 g

320 g

2200 g

3200 g

3200 g

320 g

620 g

3200 g

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Small-pan

Large-pan

Large-pan

100×100

100×100

164×124

164×124

164×124

100×100

164×124

164×124

0.001 g

0.001 g

0.01 g

0.01 g

0.01 g

0.01 g

0.01 g

0.1 g

ModelPan size



Large-pan model

Analytical Balances, Top-Loading Balances

AW Series

AX Series

AY Series

fABiDLMOGPRBiDLMOGPRLMOGPR

i

G

f

A

L

O

Precision Platform Balances

BW-K

BW-K/BX-K Series

The Shimadzu Precision Platform balances have been engineered with the innovative UniBloc mechanism since 1989. Powerful features support any imaginable weighing application. BW-K Series includes internal calibration weight.

BX-K iDLMOGPu�





If you'd like to use "WindowsDirect" with "Windows 7" "Windows VIista", or USB port, please contact to our distributors.




CheckweighingSet an upper and lower threshold. The display continually indicates whether the sample is within the range,

“GO”; over range, “HI”; or under range, “LO”. Choose one of two checkweighing bargraph display modes.

Analog display modes

BW-K Series

For accurate internal calibration. Calibration can be performed by simple lever operation.

Large-size calibration weight (BW-K only)

BW12KH

BW22KH

BW32KH

BW32KS

BW52KS

12 kg

22 kg

32 kg

32 kg

52 kg

Built-in

Built-in

Built-in

Built-in

Built-in

345×250

345×250

345×250

345×250

345×250

0.1 g

0.1 g

0.1 g

1 g

1 g

ModelPan size (mm)

approx.Calibration

weightMinimumdisplayCapacity

BX12KH

BX22KH

BX32KH

BX32KS

BX52KS

12 kg

22 kg

32 kg

32 kg

52 kg

External

External

External

External

External

345×250

345×250

345×250

345×250

345×250

0.1 g

0.1 g

0.1 g

1 g

1 g

ModelPan size (mm)

approx.Calibration


ciDLMOGPu�

i

Gu

f

L

UniBloc Precision Platform Balances

Data transfer port of BW-K/BX-K Series

Data transfer port of AW/AX/AY Series

Data transfer port of BL Series

Sens

itivi

ty e

rror

0

Ambient temperature

Calibrations

SET

SET

SET8:00 12:30 17:30


error band



Internal calibration modes

✓

✓

✓

✓

✓ ✓

✓

✓

✓

✓

✓

✓




Fully-automatic calibration; PSC (AW only)



Meets requirements of GLP/GMP/ISO9000. Calibration reports can be

output with date and time, provided by the built-in clock.

Clock-CAL function (AW only)


Weighed data can be directly typed into any Windows application and no interface software is required.If you'd like to use "WindowsDirect" with "Windows 7" "Windows Vista", or USB port, please contact to our distributors.


Piece counting function is standard.

Piece counting function

Remaining weighing capacity can be seen

at a glance.

Analog bar graph display

This electro-magnetic precision balance is as compact as a portable scale.

Compact body

Very fast response for operator comfort and efficiency.

Quick response

Automatic unit conversion at the push of a button.

Carat, and other units are standard.

Unit conversion

Analytical Balances

AW

AW/AX/AY Series

BL Series

AX

AY

/��OG

Small-pan model BL3200HL






AY120 120 g 0.1 mg 80 dia AY220 220 g 0.1 mg 80 dia

WindowsDirect

Minimumdisplay

Pan size(mm)

InternalcalibrationModel Capacity

BL3200HLonly

High-resolution balances made affordable

Small-pan modelwith windbreak

BL220H *

BL320H *

BL2200H

BL3200H

BL3200HL

BL320S

BL620S

BL3200S

220 g

320 g

2200 g

3200 g

3200 g

320 g

620 g

3200 g

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Small-pan

Large-pan

Large-pan

100×100

100×100

164×124

164×124

164×124

100×100

164×124

164×124

0.001 g

0.001 g

0.01 g

0.01 g

0.01 g

0.01 g

0.01 g

0.1 g

ModelPan size



Large-pan model

Analytical Balances, Top-Loading Balances

AW Series

AX Series

AY Series

fABiDLMOGPRBiDLMOGPRLMOGPR

i

G

f

A

L

O

Precision Platform Balances

BW-K

BW-K/BX-K Series

The Shimadzu Precision Platform balances have been engineered with the innovative UniBloc mechanism since 1989. Powerful features support any imaginable weighing application. BW-K Series includes internal calibration weight.

BX-K iDLMOGPu�





If you'd like to use "WindowsDirect" with "Windows 7" "Windows VIista", or USB port, please contact to our distributors.




CheckweighingSet an upper and lower threshold. The display continually indicates whether the sample is within the range,

“GO”; over range, “HI”; or under range, “LO”. Choose one of two checkweighing bargraph display modes.

Analog display modes

BW-K Series

For accurate internal calibration. Calibration can be performed by simple lever operation.

Large-size calibration weight (BW-K only)

BW12KH

BW22KH

BW32KH

BW32KS

BW52KS

12 kg

22 kg

32 kg

32 kg

52 kg

Built-in

Built-in

Built-in

Built-in

Built-in

345×250

345×250

345×250

345×250

345×250

0.1 g

0.1 g

0.1 g

1 g

1 g

ModelPan size (mm)

approx.Calibration


BX12KH

BX22KH

BX32KH

BX32KS

BX52KS

12 kg

22 kg

32 kg

32 kg

52 kg

External

External

External

External

External

345×250

345×250

345×250

345×250

345×250

0.1 g

0.1 g

0.1 g

1 g

1 g

ModelPan size (mm)

approx.Calibration


ciDLMOGPu�

i

Gu

f

L

UniBloc Precision Platform Balances

Data transfer port of BW-K/BX-K Series

Data transfer port of AW/AX/AY Series

Data transfer port of BL Series

Sens

itivi

ty e

rror

0

Ambient temperature

Calibrations

SET

SET

SET8:00 12:30 17:30


error band



Internal calibration modes

✓

✓

✓

✓

✓ ✓

✓

✓

✓

✓

✓

✓



Portable Electronic Balances

ELB Series

Optional battery operation makes it readily portable with no compromise in accuracy.

Piece counting, percent display, and specific gravity modes are

easily accessible.

Battery operation makes it portable

Improved internal resolution provides extra accuracy.

High sensitivity and stability

Stable results are quickly displayed.

Quick response

Optional specific gravity kit is available for extra efficiency.

Standard specific gravity software

User-selectable parameters for high-vibration environments

provide dependable results.

Digital stability control

Totally portable

Small-pan

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Large-pan

Large-pan

Large-pan

Large-pan

110 dia

110 dia

110 dia

170×130

170×130

170×130

170×130

170×130

170×130

170×130

0.01 g

0.01 g

0.01 g

0.05 g

0.1 g

0.1 g

0.1 g

0.1 g

1 g

1 g

120 g

200 g

300 g

600 g

600 g

1,200 g

2,000 g

3,000 g

6,000 g

12,000 g

ELB120

ELB200

ELB300

ELB600

ELB600S

ELB1200

ELB2000

ELB3000

ELB6000S

ELB12K

ModelMinimumdisplay

CalibrationweightPan type Capacity

.OP

This whole system can be operated with dry batteries.


Various application modesO

Two-way power supply (AC or Battery operation).

Temperaturecalibration kit

Electronic printer

UniBloc Electronic Moisture Balance

MOC-120H

Large sample pan and capacity allow any sample to be placed for the best drying conditions. Reliable UniBloc weighing mechanism and unique continuous auto-tare system assure accurate measurements.

Measuring method

Sample pan size

Sample pan material

Minimum display in weighing

Measurement range of

moisture content

Moisture content minimum display

Sample capacity

Measurement modes

Drying heater

Digital output

Temperature range

Dimensions

Weight

Operational temperature and

humidity range

Power requirements

Stored procedures

Standard accessories

Optional accessories

Consumables

Heat drying and weight loss

130 mm dia

Stainless steel

0.001 g

0.01% to 100.00 %

0.01%

120 g

Automatic or Timed ending modes,

Standard, Rapid, Slow and Step drying

modes, Predictive Measuring mode

Mid-wave infrared quartz heater

Complete test data including instrument settings

can be output. Optional electronic printer prints

the data in tabular or graphical style. Excel®

Spread Sheets can receive the data without

communication software (WindowsDirect).

30 to 200°C (by 1°C increments)

220W × 415D × 190H (mm)

4.5 kg

5 to 40°C, 85% RH or lower

AC100 to 127 / 220 to 240V, 640W

maximum

10

Sample pan 2 pcs, Sample pan handler 2 pcs,

Aluminum sheet 20 pcs, Spoon, Spatula

Temperature calibration kit,

Electronic printer, RS-232C Cable

Aluminum sheet 500 pcs, Printer paper for

optional electronic printer

Optional Accessories

The temperature

at the sample

position can be

directly measured.

Measurements can be

printed out in tabular

or graphical style.

Read instruction manual and understand before use of this instrument.●Use this instrument for measurements in which water vaporizes from the sample

under heating.●The temperature of the heater installed in this instrument becomes higher than the

set heating temperature for the sample.●Any sample that is explosive, inflammable or may cause hazardous reaction under

heating must not be measured with this instrument.

Application Balances

LM/

A larger sample pan contributes to accurate measurements,

but the larger heat capacity of it normally results in a larger

zero drift in the precision weighing.

The MOC-120H is equipped with a unique continuous auto-tare

mechanism, which eliminates the zero drift continuously and

ensures high accuracy, even with a larger sample pan.

Large sample pan and continuous auto-tare mechanism

Shimadzu’s UniBloc cell is used as the core mechanism of the

weighing part. Its uniform structure maintains the high

performance of precision weighing under repeated heating /

cooling.

UniBloc technology for precision weighing

Mid-wave infrared quartz heater provides effective drying for a

wide range of samples. Besides the excellent drying

performance, it offers a long operational life of 20,000 to

30,000 hours. Therefore, the long-term operational cost is much

lower than halogen lamp heaters.


The final result can be predicted from the drying process,

saving time in repeated measurements.

Predictive measuring mode

Complete sample data and instrument settings can be directly

typed into any application on Windows and no interface

software is required.

If you'd like to use "WindowsDirect" with "Windows 7"



MOC-120Hwith 130-mm

sample pan

Data transfer port of ELB Series

Data transfer port of MOC-120H



ELB Series

Optional battery operation makes it readily portable with no compromise in accuracy.

Piece counting, percent display, and specific gravity modes are

easily accessible.

Battery operation makes it portable

Improved internal resolution provides extra accuracy.

High sensitivity and stability

Stable results are quickly displayed.

Quick response

Optional specific gravity kit is available for extra efficiency.

Standard specific gravity software

User-selectable parameters for high-vibration environments

provide dependable results.

Digital stability control

Totally portable

Small-pan

Small-pan

Small-pan

Large-pan

Large-pan

Large-pan

Large-pan

Large-pan

Large-pan

Large-pan

110 dia

110 dia

110 dia

170×130

170×130

170×130

170×130

170×130

170×130

170×130

0.01 g

0.01 g

0.01 g

0.05 g

0.1 g

0.1 g

0.1 g

0.1 g

1 g

1 g

120 g

200 g

300 g

600 g

600 g

1,200 g

2,000 g

3,000 g

6,000 g

12,000 g

ELB120

ELB200

ELB300

ELB600

ELB600S

ELB1200

ELB2000

ELB3000

ELB6000S

ELB12K

ModelMinimumdisplay

CalibrationweightPan type Capacity

.OP

This whole system can be operated with dry batteries.


Various application modesO

Two-way power supply (AC or Battery operation).

Temperaturecalibration kit

Electronic printer


MOC-120H

Large sample pan and capacity allow any sample to be placed for the best drying conditions. Reliable UniBloc weighing mechanism and unique continuous auto-tare system assure accurate measurements.

Measuring method

Sample pan size

Sample pan material

Minimum display in weighing

Measurement range of

moisture content

Moisture content minimum display

Sample capacity

Measurement modes

Drying heater

Digital output

Temperature range

Dimensions

Weight

Operational temperature and

humidity range

Power requirements

Stored procedures

Standard accessories


Consumables

Heat drying and weight loss

130 mm dia

Stainless steel

0.001 g

0.01% to 100.00 %

0.01%

120 g

Automatic or Timed ending modes,

Standard, Rapid, Slow and Step drying

modes, Predictive Measuring mode


Complete test data including instrument settings

can be output. Optional electronic printer prints

the data in tabular or graphical style. Excel®

Spread Sheets can receive the data without

communication software (WindowsDirect).

30 to 200°C (by 1°C increments)

220W × 415D × 190H (mm)

4.5 kg

5 to 40°C, 85% RH or lower

AC100 to 127 / 220 to 240V, 640W

maximum

10

Sample pan 2 pcs, Sample pan handler 2 pcs,

Aluminum sheet 20 pcs, Spoon, Spatula

Temperature calibration kit,

Electronic printer, RS-232C Cable

Aluminum sheet 500 pcs, Printer paper for

optional electronic printer


The temperature

at the sample

position can be

directly measured.

Measurements can be

printed out in tabular

or graphical style.

Read instruction manual and understand before use of this instrument.●Use this instrument for measurements in which water vaporizes from the sample

under heating.●The temperature of the heater installed in this instrument becomes higher than the

set heating temperature for the sample.●Any sample that is explosive, inflammable or may cause hazardous reaction under

heating must not be measured with this instrument.


LM/

A larger sample pan contributes to accurate measurements,

but the larger heat capacity of it normally results in a larger

zero drift in the precision weighing.

The MOC-120H is equipped with a unique continuous auto-tare

mechanism, which eliminates the zero drift continuously and

ensures high accuracy, even with a larger sample pan.

Large sample pan and continuous auto-tare mechanism

Shimadzu’s UniBloc cell is used as the core mechanism of the

weighing part. Its uniform structure maintains the high

performance of precision weighing under repeated heating /

cooling.

UniBloc technology for precision weighing

Mid-wave infrared quartz heater provides effective drying for a

wide range of samples. Besides the excellent drying

performance, it offers a long operational life of 20,000 to

30,000 hours. Therefore, the long-term operational cost is much

lower than halogen lamp heaters.


The final result can be predicted from the drying process,

saving time in repeated measurements.

Predictive measuring mode

Complete sample data and instrument settings can be directly

typed into any application on Windows and no interface

software is required.

If you'd like to use "WindowsDirect" with "Windows 7"



MOC-120Hwith 130-mm

sample pan

Data transfer port of ELB Series

Data transfer port of MOC-120H



MOC63u Measurement modes of MOC63uLM/

Easy-to-operate software and key

layout. Automatic starting mode saves

measurement time.

Easy operation—Automatic starting mode

Illuminated display provides comfortable

display visibility in all settings.

Backlight display

MOC63u is one of the most compact instruments in its class.

Width is only 202 (mm).

Compact design

It’s very easy to clean up and replace the halogen lamp.

Maintenance

The measurement conditions and data can be stored in MOC63u.

Data I/O for printer, RS-232C and USB connection for PC are

available as standard. Send balance data to Excel or other

Windows applications.

Data management—WindowsDirect and USB connection

L

Halogen heater promises you quick and

accurate measurement.

Long lifetime halogen heater

Large sample pan: 95-mm diameter

Large pan size

Data transfer port of MOC63u

200°C�

Ending modes

Set ending time

Ending drying

Tem

per

atu

reTe

mp

erat

ure

Tem

per

atu

reTe

mp

erat

ure

Tem

per

atu

re

Mo

istu

reva

po

riza

tio

nM

ois

ture

vap

ori

zati

on

Mo

istu

reva

po

riza

tio

nM

ois

ture

vap

ori

zati

on

Mo

istu

reva

po

riza

tio

n

Automatic ending

Moisture vaporizationover 30 seconds

Alternate drying modes

Starting mode

Choose the right measuring mode for your application.

30sec

5minT3

T2

T1

t3t2t1

Automatic ending modeAutomatically ends measurement when moisture loss over the previous 30 seconds becomes smaller than specified percentage.

Timed ending modeAutomatically ends measurement when the specified amount of time has elapsed.

Rapid drying modeFirst dries with the highest temperature for the specified period, then shifts to the specified temperature shortening measurement time.

Slow drying modeGently heats samples that might solidify at the surface or samples that reduce under high temperature.

Step drying modeAllows step-by-step changes in drying conditions. This feature is useful when measuring samples that contain a large amount of water.

Automatic starting modeStarts measurement immediately after closing the lid. It will save time in repeated measurement.

For food industry

Soft flour

Measurement data of soft flour

0.00

2.00

4.00

6.00

8.00

10.00

12.00

14.00

16.00

00.00.00 00.05.00 00.10.00 00.15.00 00.20.00

Time (min)

Moi

stur

e C

onte

nt (%

)

Time (min)

0.00

0.02

0.04

0.06

0.08

0.10

0.12

0.14

0.16

00.00.00 00.02.00 00.04.00 00.06.00 00.08.00 00.10.00

Measurement data of resin pellet

Moi

stur

e C

onte

nt (%

)

For chemical industry

Resin pellet

Measurement dataWith WindowsDirect

Easy to remove

Measurement modes

Timer setting

Interface

Measurement conditionsdata memory

Data memory

Temperature calibration kit

Standard��(Easy start/Automatic end/Timed end)

Rapid drying�(Easy start/Automatic end/Timed end)

Slow drying�(Easy start/Automatic end/Timed end)

Step drying(Easy start/Automatic end/Timed end)

1–120 minutes or continuous (max 12 hours)

RS-232C (9-pin connector) I/O port

USB port

10

100

Option

Max

Min

60 g

0.02 g

0.001 g

0.01/0.1% (Selectable)

0.15% (2 g)

0.05% (5 g)

0.02% (10 g)

Straight type halogen heater

400 W

50–200°C (1°C increments)

5 to 40°C, 85%RH or lower

4 kg

(There is a time restriction when exceeding 180°C.)

LCD with backlight

ø95 mm

202 × 336 × 157

Capacity

Minimum readability

Repeatability

Drying Heater

Power

Display

Pan size

Weight

Temperature rangesetting

Operational temperatureand humidity range

Dimensions (W×D×H) mm




MOC63u Measurement modes of MOC63uLM/

Easy-to-operate software and key

layout. Automatic starting mode saves

measurement time.

Easy operation—Automatic starting mode

Illuminated display provides comfortable

display visibility in all settings.

Backlight display

MOC63u is one of the most compact instruments in its class.

Width is only 202 (mm).

Compact design

It’s very easy to clean up and replace the halogen lamp.

Maintenance

The measurement conditions and data can be stored in MOC63u.

Data I/O for printer, RS-232C and USB connection for PC are

available as standard. Send balance data to Excel or other

Windows applications.

Data management—WindowsDirect and USB connection

L

Halogen heater promises you quick and

accurate measurement.

Long lifetime halogen heater

Large sample pan: 95-mm diameter

Large pan size

Data transfer port of MOC63u

200°C�

Ending modes

Set ending time

Ending drying

Tem

per

atu

reTe

mp

erat

ure

Tem

per

atu

reTe

mp

erat

ure

Tem

per

atu

re

Mo

istu

reva

po

riza

tio

nM

ois

ture

vap

ori

zati

on

Mo

istu

reva

po

riza

tio

nM

ois

ture

vap

ori

zati

on

Mo

istu

reva

po

riza

tio

n

Automatic ending

Moisture vaporizationover 30 seconds

Alternate drying modes

Starting mode

Choose the right measuring mode for your application.

30sec

5minT3

T2

T1

t3t2t1

Automatic ending modeAutomatically ends measurement when moisture loss over the previous 30 seconds becomes smaller than specified percentage.

Timed ending modeAutomatically ends measurement when the specified amount of time has elapsed.

Rapid drying modeFirst dries with the highest temperature for the specified period, then shifts to the specified temperature shortening measurement time.

Slow drying modeGently heats samples that might solidify at the surface or samples that reduce under high temperature.

Step drying modeAllows step-by-step changes in drying conditions. This feature is useful when measuring samples that contain a large amount of water.

Automatic starting modeStarts measurement immediately after closing the lid. It will save time in repeated measurement.

For food industry

Soft flour

Measurement data of soft flour

0.00

2.00

4.00

6.00

8.00

10.00

12.00

14.00

16.00

00.00.00 00.05.00 00.10.00 00.15.00 00.20.00

Time (min)

Moi

stur

e C

onte

nt (%

)

Time (min)

0.00

0.02

0.04

0.06

0.08

0.10

0.12

0.14

0.16

00.00.00 00.02.00 00.04.00 00.06.00 00.08.00 00.10.00

Measurement data of resin pellet

Moi

stur

e C

onte

nt (%

)

For chemical industry

Resin pellet

Measurement dataWith WindowsDirect

Easy to remove

Measurement modes

Timer setting

Interface

Measurement conditionsdata memory

Data memory


Standard��(Easy start/Automatic end/Timed end)

Rapid drying�(Easy start/Automatic end/Timed end)

Slow drying�(Easy start/Automatic end/Timed end)

Step drying(Easy start/Automatic end/Timed end)

1–120 minutes or continuous (max 12 hours)

RS-232C (9-pin connector) I/O port

USB port

10

100

Option

Max

Min

60 g

0.02 g

0.001 g

0.01/0.1% (Selectable)

0.15% (2 g)

0.05% (5 g)

0.02% (10 g)

Straight type halogen heater

400 W

50–200°C (1°C increments)

5 to 40°C, 85%RH or lower

4 kg

(There is a time restriction when exceeding 180°C.)

LCD with backlight

ø95 mm

202 × 336 × 157

Capacity

Minimum readability

Repeatability

Drying Heater

Power

Display

Pan size

Weight

Temperature rangesetting

Operational temperatureand humidity range

Dimensions (W×D×H) mm



Optional AccessoriesApplication Balances

Electronic Printer

Common Features for EP-80 and EP-90

EP-80

EP-90

Static Remover

STABLO-EX

Electronic Balances for Weighing Animals

Simple connection to balances using the cable provided.

Uses normal paper, suitable for long-term storage compatible

with GLP/GMP/ISO (dot impact method).

Operation can be powered by AC adapter or dry batteries

Hassle-free long-use printer paper rolls (8000 lines of printing

with one roll).

High-speed printing at approx. 3 lines/sec (printer mechanism

performance).

Installed with statistical calculation function as standard.

Can be used simultaneously with Shimadzu's unique

WindowsDirect function (output to computer).

••

••

•

••

Secure static removal

No inverse charging

Wide angle static removal

High performance maintained over a long period of use

•••

EP-90 Capable of Attaching Sample/ID Numbers,Date and Time to Each Measurement Result

Equipped with keyboard, capable of

defining ID number (fixed input

number), and sample number (number

input and then increased automatically

with each printing).

Printing of date and time (when

connected to an electronic balance

with a built-in clock) can be controlled

from the printer.

Multiplication and comparator

functionality built-in.

•

•

•

EP-80 EP-90

EP-90 print-out sample

Shimadzu’s unique2-WAY ionizer

Hand-held / On stand

The excellent ion polarity balance achieved by the alternating method ensures:

Space saving designCompact main unit requires minimal space. Holder height and angle are adjustable.

Quickly discharge container or bulk samples with fan ON.

For powdered samples, fan can be turned OFF. As a handheld unit

Upon removing the weighed animal, the balance is

automatically reset to zero regardless of deposited material.

Display response and stability can be optimized for the level of

animal movement conditions.

Dedicated software functions quick and reliableresults in live animal weighing applications

SMK-101

UW Series BW-K plus Large Animal Bucket

SMK-401

AUW-D/AUW/AUX/AUY

AW/AX/AY

UW/UX (Capacity 2200 g or more)

UW/UX (Capacity 420 to 820 g)

ELB (Capacity 600 to 6000 g)

0 g

0 g

100 g

270 g

200 g

SMK-401

SMK-301

SMK-101

SMK-102

SMK-201S

ModelReduced Capacity

(approx.) Solid Liquid

Sample Phase


BW-K

BX-K

BW-K (Capacity 22 kg or more)

BX-K (Capacity 22 kg or more)

Small Animal Bucket set

Medium-size Animal Bucket set *1

Large Animal Bucket set *2


(approx.)

UW

Animal Balances

UX

BW-K

BX-K

iDLMGu�/R

A sinker is additionally needed for liquid density measurement.

*1 Capacity is reduced about 2 kg.*2 Capacity is reduced about 6 kg.

* When animal weighing mode is not used, all the functions indicated on p.14 and p.18 are available.

Bottom 110 dia,Top 200 dia,Height 130

Bottom 305 × 215,Top 377 × 245,Height 215


SMK Specific Gravity Measurement KitsSimple specific gravity meters based on precision balances.

Combine your Shimadzu balance with a specific gravity

measurement kit for handy specific gravity measurements.

Software for specific gravity measurement is pre-installed in all

AUW-D / AUW / AUX / AUY, AW / AX / AY, UW / UX, and

ELB Series.

Order one of the balances and the corresponding specific

gravity measurement kit.

Liquid density can also be measured with a sinker

(except for ELB Series).

iDLMGuciDLMGu

fABiDLMGu�/R

BW-K plus Medium-sizeAnimal Bucket

✓

✓

✓

✓

✓

✓

✓

✓

✓

Balance Series

Balance Series


Optional AccessoriesApplication Balances

Electronic Printer

Common Features for EP-80 and EP-90

EP-80

EP-90

Static Remover

STABLO-EX

Electronic Balances for Weighing Animals

Simple connection to balances using the cable provided.

Uses normal paper, suitable for long-term storage compatible

with GLP/GMP/ISO (dot impact method).

Operation can be powered by AC adapter or dry batteries

Hassle-free long-use printer paper rolls (8000 lines of printing

with one roll).

High-speed printing at approx. 3 lines/sec (printer mechanism

performance).

Installed with statistical calculation function as standard.

Can be used simultaneously with Shimadzu's unique

WindowsDirect function (output to computer).

••

••

•

••

Secure static removal

No inverse charging

Wide angle static removal

High performance maintained over a long period of use

•••

EP-90 Capable of Attaching Sample/ID Numbers,Date and Time to Each Measurement Result

Equipped with keyboard, capable of

defining ID number (fixed input

number), and sample number (number

input and then increased automatically

with each printing).

Printing of date and time (when

connected to an electronic balance

with a built-in clock) can be controlled

from the printer.

Multiplication and comparator

functionality built-in.

•

•

•

EP-80 EP-90

EP-90 print-out sample

Shimadzu’s unique2-WAY ionizer

Hand-held / On stand

The excellent ion polarity balance achieved by the alternating method ensures:

Space saving designCompact main unit requires minimal space. Holder height and angle are adjustable.

Quickly discharge container or bulk samples with fan ON.

For powdered samples, fan can be turned OFF. As a handheld unit

Upon removing the weighed animal, the balance is

automatically reset to zero regardless of deposited material.

Display response and stability can be optimized for the level of

animal movement conditions.

Dedicated software functions quick and reliableresults in live animal weighing applications

SMK-101

UW Series BW-K plus Large Animal Bucket

SMK-401

AUW-D/AUW/AUX/AUY

AW/AX/AY


UW/UX (Capacity 420 to 820 g)

ELB (Capacity 600 to 6000 g)

0 g

0 g

100 g

270 g

200 g

SMK-401

SMK-301

SMK-101

SMK-102

SMK-201S


(approx.) Solid Liquid

Sample Phase


BW-K

BX-K

BW-K (Capacity 22 kg or more)

BX-K (Capacity 22 kg or more)

Small Animal Bucket set

Medium-size Animal Bucket set *1

Large Animal Bucket set *2


(approx.)

UW

Animal Balances

UX

BW-K

BX-K

iDLMGu�/R

A sinker is additionally needed for liquid density measurement.

*1 Capacity is reduced about 2 kg.*2 Capacity is reduced about 6 kg.

* When animal weighing mode is not used, all the functions indicated on p.14 and p.18 are available.

Bottom 110 dia,Top 200 dia,Height 130



SMK Specific Gravity Measurement KitsSimple specific gravity meters based on precision balances.

Combine your Shimadzu balance with a specific gravity

measurement kit for handy specific gravity measurements.

Software for specific gravity measurement is pre-installed in all

AUW-D / AUW / AUX / AUY, AW / AX / AY, UW / UX, and

ELB Series.

Order one of the balances and the corresponding specific

gravity measurement kit.

Liquid density can also be measured with a sinker

(except for ELB Series).

iDLMGuciDLMGu

fABiDLMGu�/R

BW-K plus Medium-sizeAnimal Bucket

✓

✓

✓

✓

✓

✓

✓

✓

✓

Balance Series

Balance Series



Balances BalancesOptional accessories

Electronic Printer EP-80 / EP-90AUW-D/AUW / AUX / AUY Series

AW / AX / AYSeries

Foot Switch FSB-102TK (For taring)

Foot Switch FSB-102PK (For printing)

Specific Gravity Measurement Kit SMK-401

Application Keyboard AKB-301

RS-232C Cable, for IBM PC/AT Compatibles (25P-9P, Null modem, 1.5m)

Electronic Printer EP-80 / EP-90






In-use Protective Cover (5 pcs)


IFB-102A-UNC

USB Conversion Kit


I/O–RS Cable

ATX / ATYSeries

Optional accessories list*1 USB serial adaptor and RS-232C cable for MOC are needed.

*2 Not available in EU.

Accessories for Shimadzu Balances

for UW/UX small-pan type

for UW/UX Series

Windbreak WBC-102

Large size windbreak WBC-502

I/O–RS Cable

IFB-102A-UNC

Printer for MOC-120H

EP-90

EP-80

AUW-DAUWAUXAUY

AWAXAY

TX TXB BL ELB BW-KBX-K MOC-120H

USB conversion kit with RS-232C cable

Foot switch

FSB-102TK

FSB-101P

FSB-102PK

FSB-101T

Specificgravitymeasurementkit

SMK-301

(See p. 24)

SMK-401

(See p. 24)

Battery for Balance

Interface for comparator IFB-RY1

Comparator lamps 100V *2

Comparator buzzer

AUW-DAUWAUXAUY

AWAXAY

UWUX TX TXB BL ELB BW-K

BX-K MOC-120H

The down trance is needed.

(needs IFB-RY1 and RY1 Connection Cable)


AUW Serieswith SMK-401

for TARE

for print

for print

for TARE

SMK-101, -102

(See p. 24)

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

✓

[no need] [no need] [no need] [no need] [no need] ✓✓ ✓ [no need] [no need]

[no need] [no need] [no need] [no need] [no need] ✓✓ ✓ [no need] [no need] [no need]

MOC63u

✓ ✓ ✓

✓

✓

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓✓ *1

MOC63u

✓ ✓

✓

✓

✓

✓

✓

✓ ✓

✓

✓

✓

✓ ✓ ✓ ✓ ✓

✓

✓

✓

✓

✓

✓

UWUX

ATXATY

ATXATY

✓

✓

Application key boardAKB-301

Balances Optional accessories

Electronic Printer EP-80 / EP-90UW / UX Series

RS-232C Interface IFB-102A (for multiple connection)

Glass Windbreak (for models with capacity of 220 to 820 g only)

Large Size Windbreak (for all models)

Small Size Windbreak (for models with capacity of 300 to 620 g only) (Std Acc. for models with readability of 1 mg)

Specific Gravity Measurement Kit SMK-101(for models with capacity of 2200 g and up only)

Specific Gravity Measurement Kit SMK-102(for models with capacity of 420 to 820 g only)


Interface for comparator IFB-RY1 100V



RS-232C Cable, for IBM PC/AT Compatibles (25P-9P, Null modem, 1.5 m)

RS-232C Cable, for multiple connection (25P-25P, Null modem, 1.5 m)


Remote Display Unit RDB-201 with operation keys

Remote Display Unit RDB-202

Angle Adjuster and Wall Hook for Remote Display

Stand for Remote Display (1-m high)

Comparator Lamps 100V (needs IFB-RY1 and RY1 Connection Cable)*2

MOC63u Printer EP-80

Printer EP-90

In-use protection cover for display (5 pcs)

Aluminum sheet

Fiberglass sheet


Sample pan (SUS)

RS-232C cable

USB connection cable

Halogen heater for replacement

SMK-201

for ELB large-pan model

BL Series

ELB Series



Simple Windbreak

Lid for Simple Windbreak


RS-232C Interface IFB-102A-UNC


Specific Gravity Measurement Kit SMK-201 (Cannot be used with small-pan models)

IFB-102A-UNC

TX / TW / TXB / TXC / TWCSeries



RS-232C Cable

BW-K / BX-K Series Electronic Printer EP-80 / EP-90






Balances BalancesOptional accessories

Electronic Printer EP-80 / EP-90AUW-D/AUW / AUX / AUY Series

AW / AX / AYSeries














IFB-102A-UNC

USB Conversion Kit


I/O–RS Cable

ATX / ATYSeries

Optional accessories list*1 USB serial adaptor and RS-232C cable for MOC are needed.

*2 Not available in EU.

Accessories for Shimadzu Balances

for UW/UX small-pan type

for UW/UX Series

Windbreak WBC-102

Large size windbreak WBC-502

I/O–RS Cable

IFB-102A-UNC

Printer for MOC-120H

EP-90

EP-80

AUW-DAUWAUXAUY

AWAXAY

TX TXB BL ELB BW-KBX-K MOC-120H

USB conversion kit with RS-232C cable

Foot switch

FSB-102TK

FSB-101P

FSB-102PK

FSB-101T

Specificgravitymeasurementkit

SMK-301

(See p. 24)

SMK-401

(See p. 24)

Battery for Balance

Interface for comparator IFB-RY1

Comparator lamps 100V *2

Comparator buzzer

AUW-DAUWAUXAUY

AWAXAY

UWUX TX TXB BL ELB BW-K

BX-K MOC-120H

The down trance is needed.



AUW Serieswith SMK-401

for TARE

for print

for print

for TARE

SMK-101, -102

(See p. 24)

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

✓

[no need] [no need] [no need] [no need] [no need] ✓✓ ✓ [no need] [no need]

[no need] [no need] [no need] [no need] [no need] ✓✓ ✓ [no need] [no need] [no need]

MOC63u

✓ ✓ ✓

✓

✓

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓✓ *1

MOC63u

✓ ✓

✓

✓

✓

✓

✓

✓ ✓

✓

✓

✓

✓ ✓ ✓ ✓ ✓

✓

✓

✓

✓

✓

✓

UWUX

ATXATY

ATXATY

✓

✓

Application key boardAKB-301

Balances Optional accessories

Electronic Printer EP-80 / EP-90UW / UX Series


Glass Windbreak (for models with capacity of 220 to 820 g only)

Large Size Windbreak (for all models)

Small Size Windbreak (for models with capacity of 300 to 620 g only) (Std Acc. for models with readability of 1 mg)

Specific Gravity Measurement Kit SMK-101(for models with capacity of 2200 g and up only)

Specific Gravity Measurement Kit SMK-102(for models with capacity of 420 to 820 g only)


Interface for comparator IFB-RY1 100V



RS-232C Cable, for IBM PC/AT Compatibles (25P-9P, Null modem, 1.5 m)

RS-232C Cable, for multiple connection (25P-25P, Null modem, 1.5 m)


Remote Display Unit RDB-201 with operation keys

Remote Display Unit RDB-202

Angle Adjuster and Wall Hook for Remote Display

Stand for Remote Display (1-m high)

Comparator Lamps 100V (needs IFB-RY1 and RY1 Connection Cable)*2

MOC63u Printer EP-80

Printer EP-90

In-use protection cover for display (5 pcs)

Aluminum sheet

Fiberglass sheet


Sample pan (SUS)

RS-232C cable

USB connection cable

Halogen heater for replacement

SMK-201

for ELB large-pan model

BL Series

ELB Series



Simple Windbreak

Lid for Simple Windbreak


RS-232C Interface IFB-102A-UNC


Specific Gravity Measurement Kit SMK-201 (Cannot be used with small-pan models)

IFB-102A-UNC

TX / TW / TXB / TXC / TWCSeries



RS-232C Cable

BW-K / BX-K Series Electronic Printer EP-80 / EP-90





UW/UX large-pan model with large size windbreak (optional accessory)

UW/UX small-pan model with glass windbreak (optional accessory)

Measurements in mm. 1mm=.03937"

AUW-D/AUW/AUX/AUY Series ATX/ATY Series

6.5 24 309

163

99

126

423235

440

253

134 17

2

223

356

338

217

168

185

ø80

BELOW-WEIGH HOOK

1.5

1.5

ø20

5

2

3.6

2

16.5

3.5

SensorBELOW-WEIGH HOOK

Case bottom

Physical Dimensions

AW/AX/AY Series

185

163213

222

102

338

8

26 307

356

432

138

244

ø91

170

426

240

162

136


UW/UX Series

BELOW-WEIGH HOOK

ø20

3

0.7

4.6

4

3

4.5 10

9

317

118

5758

191

78.8

5

180.

5

80

8417

119

202

166

379

(364)

85103

9

BELOW-WEIGH HOOKBELOW-WEIGH HOOK

317191

78.8

5

180

Small-pan model *1

Large-pan model

*1 Figure shows combination with simple windbreak (standard only for models with minimum display of 0.001g)

The delivered windbreak may differ slightly in size and shape.

UW/UX large-pan model with large size windbreak (optional accessory)

UW/UX small-pan model with glass windbreak (optional accessory)

Measurements in mm. 1mm=.03937"

AUW-D/AUW/AUX/AUY Series ATX/ATY Series

6.5 24 309

163

99

126

423235

440

253

134 17

2

223

356

338

217

168

185

ø80

BELOW-WEIGH HOOK

1.5

1.5

ø20

5

2

3.6

2

16.5

3.5

SensorBELOW-WEIGH HOOK

Case bottom

Physical Dimensions

AW/AX/AY Series

185

163213

222

102

338

8

26 307

356

432

138

244

ø91

170

426

240

162

136


UW/UX Series

BELOW-WEIGH HOOK

ø20

30.7

4.6

4

3

4.5 10

9

317

118

5758

191

78.8

5

180.

5

80

8417

119

202

166

379

(364)

85103

9

BELOW-WEIGH HOOKBELOW-WEIGH HOOK

317191

78.8

5

180

Small-pan model *1

Large-pan model

*1 Figure shows combination with simple windbreak (standard only for models with minimum display of 0.001g)

The delivered windbreak may differ slightly in size and shape.

BW-K Series BX-K Series

Physical Dimensions Measurements in mm. 1mm=.03937"

BL Series

ELB Series

Large-pan model Small-pan model


Figure shows combination with windbreak (standard only for BL220H and BL320H)

BW-K/BX-K Series

TW/TX/TXB/TWC/TXC Series

TX/TW series TXB series

212

260.3

198.

5

260.3

157 78.5

220

415

190

400

215

198.

5

77.1

77.1

160ø

110ø

21326.9

291

191.370.7

79.5

233.

2

181.8145

145

167.

8

200

147.

1

163

129.2

392.8

200

374.3192.370.7

291

161.5

127


MOC63u

336

174.4 161.6 3.7

84

144

144

129.864.5

24.6

The

hei

gh

t b

etw

een

pan

an

d p

rote

ctio

n g

lass

.

157

201.6

160

202

25070.4

ø95

291.

4

13.6

MOC-120H

EP-80/EP-90

ø110

170

188 188

130

Front leg:144 / Rear leg: 158 Front leg:144 / Rear leg: 158

216216145145 56

58 58

56

BW-K Series BX-K Series

Physical Dimensions Measurements in mm. 1mm=.03937"

BL Series

ELB Series



Figure shows combination with windbreak (standard only for BL220H and BL320H)

BW-K/BX-K Series

TW/TX/TXB/TWC/TXC Series

TX/TW series TXB series

212

260.3

198.

5

260.3

157 78.5

220

415

190

400

215

198.

5

77.1

77.1

160ø

110ø

21326.9

291

191.370.7

79.5

233.

2

181.8145

145

167.

8

200

147.

1

163

129.2

392.8

200

374.3192.370.7

291

161.5

127


MOC63u

336

174.4 161.6 3.7

84

144

144

129.864.5

24.6

The

hei

gh

t b

etw

een

pan

an

d p

rote

ctio

n g

lass

.

157

201.6

160

202

25070.4

ø95

291.

4

13.6

MOC-120H

EP-80/EP-90

ø110

170

188 188

130

Front leg:144 / Rear leg: 158 Front leg:144 / Rear leg: 158

216216145145 56

58 58

56

Shimadzu Electronic Balances G

eneral Catalog

Shimadzu Electronic BalancesGeneral Catalog

C054-E032N

Printed in Japan 4595-01203-50ANS

Company names, product/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation or its affiliates, whether or not they are used with trademark symbol “TM” or “®”.Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services. Shimadzu disclaims any proprietary interest in trademarks and trade names other than its own.

For Research Use Only. Not for use in diagnostic procedures. The contents of this publication are provided to you “as is” without warranty of any kind, and are subject to change without notice. Shimadzu does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.

© Shimadzu Corporation, 2012www.shimadzu.com/an/

Documents

Shimadzu Electronic Balances General Catalog