New Product from G Shepherd Animal HealthGSAH Feed Passage Coating

Coa

ting

Sys

tem

s

Please pass me

on ‘thank you’

It’s like giving your dairy cows a plate to eat from!GSAH FEED PASSAGE COATING is an epoxy-resin, applied over concrete in the feed passage or trough

• Improves intakes

• Makes it more comfortable for the cows to eat

• Does not harbour bacteria

• Feed areas stay cleaner, as cows are happy to lick food residues from the floor

• Cleaner feed = less wastage

• A clean eating surface is less likely to contain debris, like rough concrete

• Resistant to harsh chemicals

• Does not corrode like concrete and is up to four times stronger

• Extremely hard-wearing and can withstand heavy traffic

• Can also be used to line troughs

• Very easy to clean. The surface can be power washed as often as you like. But in practice, there’s little requirement for washing, as the cows will do it for you! (see our farmer testimonial)

• Especially useful where feed passage concrete is worn and uneven

• Smooth surface makes it easier to push feed up to the barrier, if necessary

• Fast-drying – machinery can run over the surface within 24 hours of application (times may vary, depending on ambient temperature)

• Only one coat required – suitable for zero grazing units

• Recognised by industrial engineering and manufacturing industries for its high quality

• Very smart in appearance and comes in a range of colours (colour runs through coating, so effect will not wear off)

1 - Pressure wash area then deep acid cleanse 4 - Mark outline of area required with tape 2 - Dry thoroughly with blow torch

6 - Pour mixed coatings onto dry concrete

9 - Allow to dry for 24 hrs

5 - Use paddle provided on a quality electric drill

8 - Use spiked roller to aerate coating

4 - Mix parts A, B and C

7 - Squeegee evenly

Free Delivery (subject to T&Cs)Order online at www.gshepherd.co.uk

Nutritionist Viewpoint - Paul FinlayEncouraging DMIs and keeping feeding

areas clean are two important factors, when it comes to maximising cow performance, according to national cattle nutrition expert, Paul Findley of Best Fed Nutrition. He believes that GSAH Feed Passage Flooring

is a significant development in dairy cow management, because it is more

hygienic than concrete and keeps the feeding area free of greasy food residues.

“It’s difficult to put a figure on increased DMIs, but cows will eat up better on a clean, smooth surface, compared with concrete flooring,” says Paul. “Any measure which can help to encourage them to eat is bound to enhance milk yields and I will be advising my clients to consider having it installed.”

BackgroundThe epoxy resin ingredient combination of GSAH Feed Passage Coating has been around since the mid-1990s. It was originally developed for the civil engineering industry, where a tough surface was needed, to cope with harsh chemicals. More recently, it has been applied to garage floors used by motor sport enthusiasts, where a level floor resistant to corrosive materials is required. Also used in hospitals, to improve hygiene.

Application rates(may vary, depending on condition of underlying concrete)Rough floor – 4.0kgs/square metreNew floor – 2.5kgs/square metre

Self-levelling, so no need to smooth it offRecommendation application width – 1.2-1.5 metre bandStraightforward to apply, but we recommend using our own professionals, for best results

Application Process:Pressure wash, acid clean, dry, mix, apply, squeegee, roller and allow to dry for 24 hours before use

G Shepherd Animal Health Order Hotline: 01772 690131

About GSAH Feed Passage Coating

John & Graham Robson,Roe Farm, Catterall, LancashireDairy herd: 180 Holstein Friesians averaging 10,000kgsGraham describes GSAH Feed Passage Coating as “as hard as nails.” He says the surface has remained undamaged, despite driving over it daily with a feeder wagon.

“I like to provide my cows with the best possible environment, in order to maximise yields. Making the surface more comfortable and cleaner for them to eat from was part of that process.

“There is no real need to power wash it, as the cows lick it clean themselves. I like GSAH Feed Passage Coating and it will definitely be part of any new building that is put up on the farm; it has done a good job.”

G Shepherd Animal Health,Wrainhow Business Centre, Lewth Lane, Woodplumpton, Preston, PR4 OTD

t: 01772 690131 e: office@gshepherd.co.ukwww.gshepherd.co.uk

Due to our policy of improvement where possible, details and prices in thiscatalogue are subject to change at any time. Errors and omissions excepted.

How to buy:On-line shop: Easy to use website… pay by card, cheque or BACS

On-line enquiry service: Ask for advice, we’ll get back to youOver the phone: Call 01772 690131 for advice and to order

More information & products available at www.gshepherd.co.uk G shepherd Animal Health - a division of SHEPHERD AGRI

Free Delivery T&C’s apply