Upload
others
View
22
Download
0
Embed Size (px)
Citation preview
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7701 Process Yellow are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Process Yellow 77
7701 Yellow
13527
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
48Gloss (60°)Density 1.40
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
4
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7702 Process Rubine are the intense color shade and superior print graphics. For higher dishwasher resistance use 7731 HP Fade Resistant Rubine.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Process Rubine 77
7702 Red
12524.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
40Gloss (60°)Density 1.72
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
4
+++-/+-
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7703 Process Blue are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Process Blue 77
7703 Blue
10022.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
47Gloss (60°)Density 1.96
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
8
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium UV Curable Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7704 Process Black has a deep, blue-shade tone with pigmentation based on a carbon black / alkalai blue toner combination. Note: For food container applications requiring Steam Retort or Freezer resistance please substitute RH7734998 Fade Resistant Black.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Process Black 77
7704 Black
10520.5
++++++
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
34Gloss (60°)Density 1.82
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
4
-/+-/+-+-/+
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7705 Opaque White offers good coverage and opacity over a variety of colored and clear substrates. Note: 7705 Opaque White can also be blended with basic colors.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Opaque White 77
7705 White
14527.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
23Gloss (60°)Density N/A
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
8
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7706 Ultra Opaque White is our highest opacity white and offers the best coverage over a wide variety of colored and clear substrates. This product can also be blended with basic colors.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Ultra Opaque White 77
7706 White
13517
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
25Gloss (60°)Density N/A
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
8
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium UV Curable Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7707 Ultra Dense Black has a deep, blue-shade tone with pigmentation based on a carbon black / alkalai blue toner combination. Note: For food container applications requiring Steam Retort or Freezer resistance please substitute RH7734998 Fade Resistant Black.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Ultra Dense Black 77
7707 Black
10523.5
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
34Gloss (60°)Density 1.82
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
4
-/+-/+-+-/+
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7710 Yellow are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Yellow 77
7710 Yellow
13527
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
48Gloss (60°)Density 1.40
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
4
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7711 Fade Resistant Yellow are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Fade Resistant Yellow 77
7711 Yellow
9025.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
44Gloss (60°)Density 1.08
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
5
+-/+-/+++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7720 Warm Red are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Warm Red 77
7720 Red
10524
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
36Gloss (60°)Density 1.40
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
4
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7721 HP Fade Resistant Warm Red are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
HP Fade Resistant Warm Red 77
7721 Red
13522.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
34Gloss (60°)Density 1.29
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
6
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7730 Rubine Red are the intense color shade and superior print graphics. For higher dishwasher resistance use 7731 HP Fade Resistant Rubine.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Rubine Red 77
7730 Red
12524.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
40Gloss (60°)Density 1.72
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
4
+++-/+-
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7731 HP Fade Resistant Rubine are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
HP Fade Resistant Rubine 77
7731 Red
11523.5
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
27Gloss (60°)Density 1.54
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
5
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7740 Rhodamine Red are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Rhodamine Red 77
7740 Red
8522
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
35Gloss (60°)Density 1.38
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
3
+ND++-/+
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
-/+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7741 Fade Resistant Rhodamine are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Fade Resistant Rhodamine 77
7741 Red
10522.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
30Gloss (60°)Density 1.32
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
5
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7750 Purple are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Purple 77
7750 Purple
9022.5
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
40Gloss (60°)Density 1.60
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
3
+ND++-/+
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
-/+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7751 Fade Resistant Purple are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Fade Resistant Purple 77
7751 Purple
14021.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
25Gloss (60°)Density 1.35
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
6
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7755 Violet are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Violet 77
7755 Violet
11524
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
35Gloss (60°)Density 1.56
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
6
+-/+-/+++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7760 Reflex Blue are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Reflex Blue 77
7760 Blue
11023
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
40Gloss (60°)Density 1.83
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
7
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7770 Process Blue are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Process Blue 77
7770 Blue
10023.5
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
44Gloss (60°)Density 1.96
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
8
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7780 Green are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Green 77
7780 Green
9524.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
38Gloss (60°)Density 1.50
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
8
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7790 Mixing Black are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Mixing Black 77
7790 Black
10525.5
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
39Gloss (60°)Density 1.75
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
8
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7795 Transparent White can be used in unlimited quantities to adjust color strength and printability.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
Transparent White 77
7795 Extender
11523.5
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
N/AGloss (60°)Density N/A
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
ND
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 77012 012 Yellow are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
012 Yellow 77
77012 Yellow
13526.5
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
49Gloss (60°)Density 1.38
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
4
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 77021 021 Orange are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
021 Orange 77
77021 Orange
11023.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
36Gloss (60°)Density 1.87
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
3
+++++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_1010
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 77032 032 Red are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
032 Red 77
77032 Red
11024.5
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
38Gloss (60°)Density 1.38
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
4
++-/+-/+-
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.
DryOffset_TECHSHEET_0311
TECHNICAL DATA
*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS
Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)
Description:
Formula Code:
INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed continers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 77072 072 Blue are the intense color shade, low dot-gain and superior print graphics.
BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable
SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer
(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic
containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.
Series:
Color:
CHARACTERISTICS
PRODUCT COMPLIANCE
072 Blue 77
77072 Blue
11024.0
+++++2-1-2
The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.
Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 [email protected] - www.zeller-gmelin.com
40Gloss (60°)Density 1.45
Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali
PIGMENT FASTNESS DATA
6
+-/+-/+++
Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments
+*Oils/Fats/Greases
*Our products are not approved for direct food contact applications.