Shaik Jeelani, Ph.D., P.E. - Tuskegee University...Co-PI with Dr. Mahesh Hosur 57. “A Partnership for Innovations in Nano Composites Technology,” National Science Foundation, ($600,000,

1

Shaik Jeelani, Ph.D., P.E. Vice President, Research and Sponsored Programs

Dean of the Graduate School

Interium Department Head of Materials Science and Engineering

TUSKEGEE UNIVERSITY Ph.: (334) 727-8970

Fax: (334)-724-4224 [email protected]

Education

• Ph. D 1974, North Carolina State University, Raleigh, North Carolina

• Major: Machine Design, Stress Analysis, Metal Machining

• Minor: Mathematics, Engineering Mechanics

Experience (Academic)

• Professor of Mechanical Engineering, Tuskegee University, 1980 – Present

• Associate Professor of Mechanical Engineering, Tuskegee University, 1978 –1980

• Assistant Professor of Mechanical Engineering, Tuskegee University, 1974 –1978

Experience (Administrative/Managerial)

• Vice President, Research and Sponsored Programs, Tuskegee University, 1996-Present

• Dean, Graduate School, 2015 – Present

• Founding Head, Department of Materials Science and Engineering, 1998-2015

Director, Ph.D. Program in Materials Science and Engineering, 1998-2012

• Director, Center for Advanced Materials, Tuskegee University, 1977 - Present

• Interim Dean, School of Engineering and Architecture, Tuskegee University, 1992-

1994

• Director, Computer Aided Design Laboratory (CAD), Tuskegee University, 1984-1996

• Associate Dean of Engineering and Architecture, Tuskegee University, 1981 – 1996

• Assistant Dean, of Engineering and Architecture, Tuskegee University, 1980 – 1981

• Interim Head, Mechanical Engineering Department, Tuskegee University, June 1, 1987

- August 31, 1987, June 1, 1982 – July 30, 1983, April 1, 1979 – June 1, 1980, June 1,

• 1977 – May 31, 1978

Curriculum and Infrastructure Development

Dr. Jeelani played a leading role in the development of various curriculums and infrastructure

in the School of Engineering and Architecture. He spearheaded the Infrastructure and

curriculum development in the School of Engineering and Architecture through a $2.50

million grant from the Army Research Office. This effort resulted in the university’s

obtaining full (six years) ABET accreditation for all its Engineering programs. He also

wrote the proposal for funding of the first Endowed Chair in Materials Science and

Engineering at Tuskegee University and spearheaded the development of the curriculum,

recruitment of students and establishment of Tuskegee University’s first Ph.D. program

in Materials Science and Engineering.

Division of Research and Sponsored Programs

mailto:[email protected]

2

Dr. Jeelani is serving as the first Vice President for Research and Sponsored Programs

(1996-Present) at Tuskegee University. The responsibilities include developing aggressive

strategies and plans to increase funding for research and other sponsored programs and

supervising three departments: Sponsored Programs, International Programs and

Grantsmanship and Compliance. As a result of streamlining the Grants and Contracts process

through development of various Sponsored Programs and Compliance Guides and

publication of Tuskegee’s Research Capability, Funding for Research and Sponsored

Programs at Tuskegee was raised from $23.6 million in 1996 to $48 Million in 2004.

Teaching Experience

Engineering Graphics, Introduction to Engineering, Statics, Dynamics, Applied Mechanics,

Materials Science, Strength and Materials, Thermodynamics, Fluid Mechanics, Theory of

Machines, Manufacturing Processes, Machine Design, Advanced Machine Design, Stress

Consideration in Design, Experimental Stress Analysis.

Research Interests

Processing (hand layup, vacuum bag, autoclave, compression molding), Process Sensing,

low-cost manufacturing using RTM, VARIM processes, static and dynamic (low-

velocity, high strain rate, ballistic impact) of Fiber Reinforced Composites, Sandwich

Composites, Fatigue and Fracture, Microstructural characterization (SEM, Optical

Microscopy, Thermo-gravimetric Analysis), Structural Analysis, Non Destructive

Evaluation.

Funded Grants

1. “Surface Integrity in Machining 18% Nickel Maraging Steel”, Grant No SER77-04201

from National Science Foundation ($20,000, 6/1/77 - 12/31/78).

2. “Evaporation Behavior of Super Alloy”, NASA, Lewis Research Center, ($40,000

8/1/78 – 8/31/78), with Dr. R.P. Ramirez.

3. “A study of Cumulative Fatigue Damage”, U.S. Navy, Naval Air Systems Command,

($30,000 11/28/77-9/2/78) with Dr. B.Z. Jarkowski.

4. “Evaporation Behavior of Super Alloys”, NASA, Lewis Research Center, ($25,000

6/1/78-12/31/79), with Dr. R.P. Ramirez.

5. “A Study of Cumulative Fatigue Damage”, U.S. Navy Air Systems Command

($41,175, 2/1/79-4/30/80).

6. “A Study of Cumulative Fatigue Damage”, U.S. Navy Air Systems Command

($61,891, 5/15/80-8/14/81).

7. “Support for Pre-College and Scholarship Programs in the School of Engineering and

Architecture”, DoD, DoE, NASA and Industry, ($3.2 million, 1981-1996).

8. “Investigation of Cumulative Fatigue Damage for Selected Materials”, U.S. Navy,

Navel Air Systems Command, ($42,635 5/15/82-8/31/83).

9. “Characterization of High Cycle Fatigue Behavior of Selected Materials”, With Dr.

R. Natarajan, NASA-Marshall Space Flight Center, $108,544, 8/15/83-812/84).

10. “Characterization of Polymer Adhesives for Composites”, with Drs. Dillon and

Ludwick, NASA - Lewis Research Center, ($99,593, 2/1/884-1/31/85).

3

11. “Effect of Cutting Speed and Tool Rake angle on the Fatigue Life of AISI 4130 Steel”,

NASA-Marshall Space Flight Center, ($15,000, 6/1/84-5/31/85).

12. “Characterization of High Cycle Fatigue Behavior of Selected Materials”, NASA-

Marshall Space Flight Center, ($122,871, 12/15/84-12/31/86).

13. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”,

NASA-Marshall Space Flight Center, ($18,000, 6/1/85-5/31/86).

14. “Characterization of Fiber Composites”, NASA-Marshall Space Flight Center,

($18,000, 9/23/85-9/22/86).

15. “Characterization of Polymer Adhesives for Composites”, with Dr. Ludwick, NASA-

Langley Research Center ($121,891, 4/1/85-12/31/86).

16. “Measurement of Residual Stress Distribution in Machining AISI 4130 Steel”,

NASA- Marshall Space Flight Center, ( $20,000 9/23/85-9/22/86)

17. “Manufacture and Characterization of Silicon Carbide/Silicon Carbide Composites”,

U. S. Navy, Office of Naval Research, URI program, ($2.25 Million, 1986-1991).

18. “Aviation Pavement Study for FAA”, Pailen-Johnson Associates, ($13,251, 2/1/-

9/31/1986).

19. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”,

NASA-Marshall Space Flight Center, ( $18,000, 6/1/86-5/31/87).

20. “Effect of Grinding on the Fatigue Life of Ti 6A1-4V Alloy”, NASA-Marshall Space

Flight Center, ($124,871, 12/4/86-12/3/87).

21. “Characterization of Fiber Composites”, NASA-Marshall Space Flight Center, ($

20,000, 9/18/86-8/19/87).

22. “Structure and Properties of FM73 and Related Epoxy Adhesives”, NASA- Langley

Research Center, with Dr. Al Ludwick ($123,385, 3/23/87-2/22/88).

23. “Environmental Effects on the Mechanical Properties of Composite Materials”,

NASA-Marshall Space Flight Center, ($18,000, 6/1/87-530/88).

24. Determination of Residual Stress Distribution in Machining 2024-T351 Aluminum

Alloy”, NASA-Marshall Space Flight Center, ($20,000, 6/1/87-5/31/88).

25. “An Evaluation of the Interfacial Bond Properties between Carbon Phenolic and Glass

Phenolic Composite Materials” NASA-Marshall Space Flight Center, ($18,000,

6/1988-5/1988).

26. “Manufacture and Characterization of SiC/SiC Composites, U.S. Navy, Office of Naval

Research, with Drs. Ludwick, Adeyemi and Yang ($2.25 million, 9/86- 9/91).

27. "Development of Capability for Characterization of Ceramic/Ceramic Composites”,

U.S. Air Force, Office of Scientific Research, ($250,000, 1/89- 12/90).

28. “An Investigation of the Effects of Environment and Combined Compression- Shear

on the Response of Carbon/PEEK Thermoplastic Composites”, NASA- Marshall Space

Flight Center, ($256,000, 9/1/98-9/8/1992).

29. “Fractographic Analysis of Advanced Organic Matrix Composites”, U. S. Navy,

Naval Air Development Center, ( $25,000, 10/30/89-/1992)

30. “Characterization of High Cycle Fatigue Behavior of Selected Materials”, NASA-

Marshall Space Flight Center, ($120,000, 5/1990-4/30/91).

31. Mechanical Property Testing of Resin Transfer Molded Composites”, McDonnel

Douglas Corp. ($15,000, 10/92-12/92), Co-PI with Dr. Hassan Mahfuz.

32. “Fatigue Damage in Composite Materials”, United States Army, Strategic Defense

Command, ($200,000, 8/90-8/93).

33. “Micro-structural Study of the Thermo-mechanically Fatigued Titanium Aluminide”,

4

U. S. Navy, Naval Warfare Center (NAWC), ($10,000, 9/92-3/93).

34. “Mechanical Property Characterization of Refractory Composites”, National

Aerospace Plane (NASP) Joint Program Office”, ($810,352, 9/90-9/95).

35. “High Temperature Fatigue of SiCf/Si3N4”, National Science Foundation, ($310,000,

9/92-9/95).

36. “Effects of Stress Ratio on Fatigue Damage in Composite Materials”, U. S. Army,

Strategic Defense Command, ($200,000, 8/90-8/93).

37. “Reverse Fatigue of RTM Composites” 3M Corporation ($45,000, 4/92-4/95). Co-PI

with Dr. Hassan Mahfuz.

38. “Infrastructure Support For Engineering at Tuskegee University”, Department of

Defense, Army Research Office, ( $ 2.25 million, 1993-1998)

39. “Instrumentation of Fatigue and Compression Characterization Advanced Composites”,

U. S. Navy, Office of Naval Research (ONR), ($350,000, 10/93-10/95).

40. “Advanced Polymeric Composites Manufacturing”, Martin Merietta Laboratories,

($20,000, 2/1/94-2/1/95), Co-PI with Dr. Hassan Mahfuz.

41. “Intelligent Processing of Resin Transfer Molded Composites”, Defense Advanced

Research Project Agency (DARPA), ($726,100, 2/95-2/96).

42. “Advanced Polymeric Composites Manufacturing and Damage Tolerance Studies”,

Lockheed Martin Manned Space Systems, New Orleans, LA ($110,000, 2/94-12-98),

Co-PI with Dr. Hassan Mahfuz.

43. “Intelligent Resin Transfer Molding for Integral Armor Applications”, Army

Research Office (ARO), ($9,400,000, 9/95-9/2000).

44. “Advanced Composites for Sea Structures”, Office of Naval Research, ($380,000, 9/95-

10/98).

45. Smart Materials for Transport Control”, National Science Foundation, Alabama

EPSCoR, ($300,000, 9/95-9/98).

46. “Development and Analysis of Composite Isogrid Structures”, NASA- Marshall Space

Flight Center, ($100,000, 5/95-5/97) Co-PI with Dr. Hassan Mahfuz.

47. "Advanced Integrated Structural Optimization," McDonnell Douglas Aerospace, St.

Louis, Missouri, ($50, 000, 1/95-12/95), Co-PI with Dr. Hassan Mahfuz.

48. "Damage Tolerance of RTM Composite Sandwich Constructions,” Wright

Laboratory (WL), Wright Patterson Air Force Base, ($300,000, 9/95-9/98), Co-Pi

with Dr. Uday Vaidya.

49. "Innovative Manufacturing of High Performance Materials," National Science

Foundation, Center for Research Excellence in Science and Technology (CREST),

($4.5 million, 9/97-9/02).

50. "Instrumentation for the Investigation of Structural Integrity of Sandwich

Structures," U. S. Navy, Office of Naval Research (ONR), ($92,000, 6/00 -

12/00)

51. “Resin Infusion of Advanced Aerospace Composites”, Boeing Company, ($250,000,

9/96-9/01), Co-PI with Dr. Hassan Mahfuz.

52. “Alabama EPSCoR Infrastructure Development”, National Science Foundation,

Alabama EPSCoR, ($150,000, 1998-2001).

53. “Innovative Manufacturing of Advanced Composites for Automotive Applications”,

General Motors Corporation, ($200,000, 3/98-3/02).

54. Sandwich Construction for Sea Structures” U. S. Navy, Office of Naval Research,

($590,000, 1/99-1/01), Co-PI with Dr. Hassan Mahfuz.

5

55. Survivability of Affordable Aircraft Composite Structures, Air Force Laboratory,

Wright Patterson Air Force Base, ($ 450,000, 1999-2003), Co-PI with Dr. Mahesh

Hosur.

56. “Dynamic Characterization of Graphite/Epoxy Composite Laminates under Inplane

compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated

Temperatures”, U.S. Army, Cold Regions Research Laboratory, ($175,000, 2001-2003)

Co-PI with Dr. Mahesh Hosur

57. “A Partnership for Innovations in Nano Composites Technology,” National Science

Foundation, ($600,000, 2/1/01 - 1/31/03) Co-PI with Dr. Hassan Mahfuz.

58. “Innovative Materials and Processes for Next Generation Weapons Systems, U.S.

Army Research Office, ($900,000, 2001-2004), Co-PI with Dr. Derrick Dean.

59. “Nanophased Composites for Marine Structures”, U. S. Navy, Office of Naval

Research, ($994,000, 2/02-7/04), Co-PI with Dr. Hassan Mahfuz.

60. “Alabama Internet II Middleware Initiative”, National Science Foundation, Alabama

EPSCoR, ($275,010, 2/1/01-1/31/04).

61. “Acquisition of High Speed Imaging System for Dynamic Characterization of

Advanced Materials”, U. S. Navy, Office of Naval Research, ($200,000. 9/1/01-

8/31/02).

62. “Support for the Ph.D. Program in Materials Science and Engineering at Tuskegee

University”, David and Lucile Packard Foundation, ($ 244,000, 2001-2002).

63. “Synthesis, Manufacturing and Characterization of Structural Nanocomposites”

Center for Research Excellence in Science and Technology (CREST) Program,

National Science Foundation, ($4.5million, 9/1/03-8/31/08).

64. “Integrative Graduate Education and Research Training in Nanomaterials Science and

Engineering”, Integrative Graduate Education and Research Training (IGERT)

Program, National Science Foundation, ($3.32 million, 10/01/03-9/30/08).

65. “Studies of Structural Nanocomposites using Transmission Electron Microscopy”,

Research Infrastructure in Science and Engineering (RISE) Program, National Science

Foundation, ($1.0 million, 02/10/04-01/31/06).

66. “Center of Excellence for Composites and Advanced Materials” Air Transportation

Center of Excellence for Advanced Materials, Federal Aviation Administration,

($225,000, 06/01/04-05/30/07).

67. “Development of Flexible Extremities utilizing Shear Thickening Fluid/fabric

Composites”, Center of Excellence for Battlefield Capability Enhancement (BCE),

Army Research Office, ($2.23 million, 11/01/04-09/30/09).

68. “Alabama Center for Nanocomposite Materials” Alabama Experimental Program for

Stimulating Competitive Research (EPSCoR), National Science Foundation, ($1.8

million, 2005-2008), Co-PI with Dr. Mahesh Hosur.

69. “Effects of Surface Modifications on the Interfacial Properties of Structural

Nanocomposites,” National Science Foundation (06/01/05-05/31/06), $100,000 Co-

PI with Dr. Mahesh Hosur.

70. “Characterization of Nanocomposites and Composite Laminates,” Clarkson

Aerospace Inc., (8/1/2005-1/31/2010), $225,000.

71. “MRI: Acquisition of Ultrasonic C-Scan System for Research and Educational

Training in Structural Nanocomposites,” National Science Foundation (09/01/05-

08/31/08), $260,368 Co-PI with Dr. Mahesh V. Hosur.

6

72. PREM: A Research and Educational Partnership in Nanomaterials between Tuskegee

University and Cornell University, (9/01/2006-08/31/2012), $2,550,000.

73. Enhancement of Research Infrastructure in the Materials Science and Engineering

Program at Tuskegee University, National Science Foundation, (10/1/2006-

9/30/2008), $1,000,000.

74. “MRI: Acquisition of a Material Testing System for Research and Educational

Training in Static and Dynamic Characterization of Advanced Structural

Nanocomposites,” National Science Foundation (09/01/07-08/31/10), $394,550 Co-

PI with Dr. Mahesh V. Hosur.

75. “Investigations on the Mechanical, Multifunctional and Environmental Behavior of

Fiber Reinforced Polymer Nanocomposites for Marine Applications,” Office of Naval

Research (7/7/08-05/31/12), $500,000 Co-PI with Dr. Mahesh V. Hosur.

76. “Alabama Center for Nanocomposite Materials,” NSF-EPSCoR (09/01/2008-

08/31/2010), $1,250,000 Co-PI with Dr. Mahesh Hosur.

77. “HBCU-RISE: Strengthening the Ph.D. Program in Materials Science and

Engineering at Tuskegee University,” National Science Foundation, (1/1/2009-

12/31/2011), $1,000,000.

78. “Roadside Explosive Hazard Indicator and Deterrent System (REHIDS),” Concurrent

Technologies Corporation, (4/10/10-9/30/10). $56,000, Co-PI with Dr. Mahesh V.

Hosur.

79. “HBCU-RISE: Enhancement of Research and Educational Infrastructure in

Nanobiomaterials Science and Engineering at Tuskegee University,” National

Science Foundation, $1.0M, (04/01/2015-03/31/2018) Co-PI with Dr. Vijaya Rangari

80. “The NanoBio Science Partnership for Alabama Black Belt Region,” National

Science Foundation, (09/01/2011-08/31/2019), $10 M.

81. “Implementation Project: Preparing Interdisciplinary Minority Material Scientists and

Engineers of the Future,” National Science Foundation, $1,779,388, (7/1/2017-

6/30/2022).

82. “Targeted Infusion Project: Integrative Makers Course and Laboratory for STEM

Undergraduates,” National Scienc Foundation, $300,000, (07/01/18-06/30/2021), Co-

PI with Dr. Shaik Zainuddin.

83. REU SITE: Tuskegee University Research Experience for Undergraduates in Nano-

Bio Materials Science and Engineering, $377,994.00, (04/05/2017-03/31/2021),

(Shaik Zainuddin (PI), Mahesh Hosur (Co-PI)), National Science Foundation. Co-PI

with Dr. Shaik Zainuddin.

84. MRI: Acquisition of a Nanoindentation Equipment for Research and Education

Training in Nanomechanical Characterization of NanoBio Materials,” National

Science Foundation, $400,455, (09/01/2017-08/30/2020), Co-PI with Dr. Shaik

Zainuddin.

Patents Granted:

(1) Filtration system and methods of using such system for improved water filtration,

Vijaya Rangari, Vitus Apalangya, Bonifce Tiimob, Temesgen Samuel: Submittee,

pending, US 10,583,417.

7

Book Chapters

1. Shaik Zainuddin, Mahesh Hosur, Ashok Kumar and Shaik Jeelani, “Effects of ultraviolet

radiation and condensation on static and dynamic compressive behavior of nanophased

glass/ epoxy composites,” book chapter in Fiber Reinforced Polymer (FRP) Composites

for Infrastructure Applications, Editors: Ravi Jain, Luke Lee, Publisher: Springer, 2012,

pp. 91-111.

2. S. Zainuddin, M. V. Hosur, Ashok Kumar, Jonathan Trovillion, S. Jeelani, “Durability

Enhancement of Fiber Reinforced Composites Using Nanoclay,” book chapter in

Advanced fibre-reinforced polymer (FRP) composites for structural applications, Edited

by J Bai, University of Glamorgan, UK, ISBN-13: 978 0 85709 418 6, September 2013.

3. Mahesh Hosur, Farhan Chowdhury and Shaik Jeelani, “Effects of Fabrication Processes

and Nanoclay Inclusion on Performance of Woven Carbon/Epoxy Composite

Laminates,” Chapter 6 in Computational and Experimental Methods in Structures- Vol.

6: Woven Composites, Editor: Ferri M. H. Aliabadi, Imperial College Press, ISBN 978-

1-78326-617-3, 2015, pp. 179-214.

4. Shaik Zainuddin, M. V. Hosur, A. A. Mohammed, E. M. Smith and S. Jeelani,

“Thermoset Resin Sandwich Structures,” in Lightweight Composite Structures for

Transport: Design, Manufacturing, Analysis and Performance, Ed: James Njuguna,

Woodhead Publishing Series in Composites Science and Engineering, 2016, ISBN: 978-

1-78242-325-6, pp. 165-187.

5. Harish M. Rao, Mahesh Hosur, Shaik Jeelani, “Stab characterization of STF and

thermoplastic impregnated ballistic fabric composites,” Chapter 12 of Advanced Fibrous

Composite Materials for Ballistic Protection, Editors: Xiaogang Chen and Gwen Jones,

Woodhead Publishing, Cambridge, UK, ISBN: 978-1-78242-461-1, 2016, pp. 363-388.

Publications in Refereed Journal 1. “Bailey, J.A. and Jeelani, S. “Surface Integrity in Machining 18% Nickel Maraging

Steel”, ASME Transactions, 1974, pages 74-185.

2. Bailey, J.A, and Jeelani, S. “Determination of Subsurface Plastic Strain in Machining,

Using an Embossed Grid”, Wear, Vol. 36, No. 2, 1975, page 199- 206.

3. Bailey, J. A., Jeelani, S. and Baker, S. E. “Surface Integrity in Machining Quenched

and Tempered AISI 4340 Steel”, ASME, Journal of Engineering for Industry. 98 (3)

1976-1979.

4. Jeelani, S. “Measurement of Cutting Temperature in Machining Using Infrared

Photography”, Wear 68, 1981, pg. 191-202.

5. Bailey, J. A. and Jeelani, S. “State of Subsurface Region in Machining Solution

Treated and Aged 18% Nickel Maraging Steel”, Wear 72, 1981, pg. 237-243.

6. Jeelani, S. and Reddy, P. A. “A Study of Cumulative Fatigue Damage in 2011-T3

Aluminum Alloy”, Journal of Materials Science and Engineering, 561 1982, pg.

237-243.

7. Jeelani, S. and Ramakrishnan, K. “Subsurface Plastic Deformation in Machining

Annealed 18% Nickel Maraging Steel”, Wear, 85 1982, pg. 263-273.

8. Jeelani, S. and Ramakrishnan, K. “Determination of Subsurface Plastic Strain

8

Distribution in the Machining of Red Brass”, Wear, 85 1983, pg. 67-69.

9. Jeelani, S. and Ramakrishnan, K. “Determination of Subsurface Plastic Strain in the

Machining of 6-2-4-2 Titanium Alloy”, Wear, 85 1983, pg. 121-130.

10. Jeelani, S. and Aslam, M. “A Study of Cumulative Fatigue Damage in 2024-T4

Aluminum Alloy”, Wear, 939, 1984, pg. 207-217.

11. Jeelani, S. and Musial, M. “Effect of Cutting Speed and Tool Rake Angle on the

Fatigue Life of Aluminum Alloy 2024-T351”, International Journal of Fatigue. 6(3)

1984, pg. 169-172.

12. Aslam, M. and Jeelani, S. “Prediction of Cumulative Fatigue Damage”, Journal of

Materials Science, 20 1985, pg. 3232-3244.

13. Jeelani, S. and Ramakrishnan, K. “Surface Damage in Machining Red Brass”, Journal

of Material Science, 20 1985, pg. 3011-3017.

14. Jeelani, S. and Ramakrishnan, K. “Surface Damage in Machining 6A1-2Sn-4Zr-

2Mo. Titanium Alloy”, Journal of Materials Science, 20 1985, pg. 3425-3252.

15. Jeelani, S. and Musial, M. “Dependence of Fatigue Life on the Surface Integrity in

the Machining of 2024-T351 Aluminum Alloy”, Part I, “Un-lubricated Conditions”.

Journal of Material Science, 20(1) 1986, pg. 155-160.

16. Jeelani, S. and Musial, M. “A Study of Cumulative Fatigue Damage in AISI 4130

Steel”, Journal of Materials Science, 21(1) 1986, pg. 2109-2113.

17. Jeelani, S., Ghebremedhin, S. and Musial, M. “A Study of Cumulative Fatigue

Damage in Titanium 6A1-4V Alloy”, International Journal of Fatigue, 8 No. 1, 1986,

pg. 23-27.

18. Jeelani, S. and Bailey, J. A. “Residual Stress Distribution in Machining Annealed

18% Nickel Maraging Steel”, ASME Journal of Materials Science and

Technology, Vol. 108 (1986) 93-98.

19. Jeelani, S., Biswas, S. and Natarajan, R. “Effect of Cutting Speed and Tool Rake

Angle on Residual Stress Distribution in Machining 2024-T351 Aluminum

Alloy”, “A Study of Cumulative Fatigue Damage in AISI 4130 Steel”, Journal of

Materials Science, 21, 1986, pg. 2705-2710.

20. Jeelani, S., Natarajan, R. and Reddy, G. R. “A Sub-sized Fatigue Specimen”,

International Journal of Fatigue 8, No. 3(1986).

21. Mazumdar, P. and Jeelani, S. “Fatigue Crack Propagation Rate Model Based on a

Dislocation Mechanism”, Journal of Materials Science Letters, 5 (1986) 972- 974.

22. Mazumdar, P. and Jeelani, S. “Plastic Deformation – Its Role in Fatigue Crack

Propagation”, Journal of Materials Science, 21, 1986, pg. 3611-3614.

23. Jeelani, S. and Collins, M. R. “Effect of Electric Discharge Machining on the

Fatigue Life”, International Journal of Fatigue, 10 No. 2 (1988) pg. 121-125.

24. Jeelani, S. and Scott, M. A. “How Surface Damage Removal Affects Fatigue

Life”, International Journal of Fatigue, 10 No. 4 (1988) pg. 257-260

25. Haque, A., Copeland, C. W., Zadoo, D. P. and Jeelani, S. “Hygrothermal Influence

on Flexural Properties of Kevlar-Graphite/Epoxy Hybrid Composites”, Journal of

Reinforced Plastics and Composites, Vol. 9, November 1990, pp. 602-613

26. Haque, A. Moorehead, L., Zadoo, D. P. and Jeelani, S. “Hygrothermal Influence on

interlaminar Shear Strength of Kevlar-Graphite/Epoxy Hybrid Composites”, Journal

of Materials Science, 25, 1990, pg. 4639-4643.

27. Haque, A., Mahmood, S., Walker, L. and Jeelani, S. “Moisture and Temperature

Induced Degradation in Tensile Properties of Kevlar 49/Graphite-Epoxy Hybrid

9

Composites”, Journal of Reinforced Plastics and Composites, Vol. 10/No. 2, March

1991, pp. 132-145.

28. Jordan, K., Clinton, R. and Jeelani, S. “An Evaluation of the Interfacial Bond

Properties between Carbon Phenolic and Glass Phenolic Composites”, Journal of

Materials, 26 (1991), 6016-6022.

29. Rangaswamy, P Terutung, H. and Jeelani, S. “Effect of Grinding Conditions on the

Fatigue Life of Titanium 5AL-2.5SN Alloy”, Journal of Materials Science, 26 No.

10 pp. 2701-2706, 1991.

30. Haque, A. and Jeelani, S. “Environmental Effects on the Compressive Properties:

Thermosetting vs. Thermoplastic Composites”, Journal of Reinforced Plastics and

Composites, Vol. 2, February 1992, pp. 146-157.

31. Huq, N., Haque, A. and Jeelani, S. “Fracture Toughness Measurements onSiC/Al203

Composite” Journal of Material Science, 27 (1992) pp. 5989-5993.

32. Mahfuz, H., Sue, D., Jeelani, S., Baker, D. M. and Johnson, S. “Non-Linear Response

of 2-D Carbon-Carbon Composites by Layered Shell Elements”, Developments in

Theoretical and Applied Mechanics in, Vol. 16, (1992) pp. III.I. 62-72.

33. Mahfuz, H., Ingram, C. I. and Jeelani, S. “Compressive Response of Thermoplastic

Composites by Layered Shell Elements”, Computers in Engineering, Vol. 2, ASME,

1992, pp. 95-101.

34. Salekeen, S., Haque, A., Copes, J. S., Mahfuz, H. and Jeelani, S. “Effects of

Reinforcement Geometry on the Mechanical Properties of SiC/Al203 Composites

and Prediction of Flexural Properties by Energy Method”, Journal of Composites

Engineering, Vol. 2, No. 4, pp. 239-247, 1992.

35. Mahfuz, H., Yu, T. and Jeelani, S. “High Cycle Fatigue Characterization of

Titanium 5A1-2.5Sn Alloy”, Journal of Materials Science, 28 (1993) pp. 138-144.

36. Mahfuz, H., Das, P. S., Jeelani, S., Baker, D. M. and Johnson, S., “Failure

Mechanisms in Mission Cycled Carbon/Carbon Composites under Flexural Load at

Room and Elevated Temperatures”, Journal of Materials Science, 28 (1993) pp. 5880-

5886.

37. Mahfuz, H., Das, P. S., Jeelani, S., Baker, D. M. and Johnson, S., “Effect of Mission

Cycling on the Fatigue Performance of SiC Coated Carbon-Carbon Composites”,

International Journal of Fatigue, Vol. 15, No. 4 (1993) pp. 283-291.

38. Mahfuz, H., Das, P. S., Xue, D., Krishnagopalan, J. and Jeelani, S. “A Combined

Experimental and Finite Element Study to Predict The Failure Mechanisms in SiC

coated Carbon/Carbon Composites at Room and Elevated Temperatures Under

Flexural Loading”, Journal of Reinforced Plastics and Composites, Vol. 12, No.

7, July 1993, pp. 825-842

39. Haque, A., Krishnagopalan, J. and Jeelani, S. “Fatigue Damage in Laminated

Composites”, Journal of Reinforced Plastics and Composites, Vol. 12, No. 10

October 1993, pp. 1058-1069.

40. Mahfuz, H., Xue, D., Jeelani, S., Baker, D. M. and Johnson, S. “Response of SiC

Coated Carbon-Carbon Composites at Room and Elevated Temperatures under

Tensile Loading”, Composite Science and Technology, 50 (1994) 411-422.

41. Haque, A., Mahfuz, H., Ingram, C. and Jeelani, S. “Response of Thermoplastic and

Thermosetting Composites Under Compressive Loading- An Experimental and

Finite Element Study”, Composites Engineering, Vol. 4, No. 6, 1994, pp. 637-651.

42. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Structural and Functional

10

Carbon/Carbon Composites after First Carbonization”, Journal of Advanced

Materials, Vol. 26, No. 2, pp. 41-47, 1995.

43. Mahfuz, H., Zadoo, D., Wilks, F., Muneeruzzaman, M. and Jeelani, S., “Fracture and

Flexural Characterization of SiCw/SiC Composites at Room and Elevated

Temperatures”, Journal of Materials Science, 1995, Vol. 30, pp. 2406-2411.

44. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K. and Jeelani, S. “Fatigue Damage and

Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon Composites”,

Theoretical and Applied Fracture Mechanics, 24 (1995), 21-31.

45. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K. and Jeelani, S. "Fatigue Damage and

Residual Strength of Resin Transfer Molded Composites under Reversed Cyclic

Loading," Innovative Processing and Characterization of Composite Materials,

ASME 1995, NCA-Vol. 20/AMD-Vol.21 1, pp. 77-88.

46. Mahfuz, H., Haque, A., Yu, D. and Jeelani, S. “Response of Resin Transfer

(RTM) Composites under Reverse Cyclic Loading”, Transaction of the ASME,

Journal of Engineering Materials and Technology, Vol. 118, pp. 49-57, 1996..

47. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Sandwich and Hybrid Carbon-

Carbon Composites", Journal of Reinforced Plastics and Composites, Vol. 15,

October 1996, pp. 988- 1010.

48. Vaidya, U. K., Dadzie, P., Haque, A., Mahfuz, H. and Jeelani, S. "NDE and

Characterization of Micro fibers Modified Textile Carbon/Phenolic and

Carbon/Carbon Composites”, Journal of Reinforced Plastics and Composites, Vol.

16, No. 11, 1997, pp. 968- 1001.

49. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K. and Jeelani, S. "Response of

SiCfSi3N4 Composites under Cyclic Loading - An Experimental and Statistical

Analysis," Transaction of the ASME, Journal of Engineering Materials and

Technology, Vol. 119, pp 186-193, April 1997.

50. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. “Fatigue Damage in S2-

Glagg/Vinyl Ester Thick Composites”, NCA-Vol. 24, ASME, 1997, pp.247-257.

51. Gajiwala, H. M., Vaidya, U. K., Sodah, S. and Jeelani, S. “ Hybridized Resin

Matrix Approach Applied for Development of Carbon/Carbon Composites: Part- I”,

Carbon, Vol. 36, No. 7-8, pp. 903-912, 1998.

52. Mahfuz, H., Saha, M., Biggs, R. and Jeelani, S. "Damage Tolerance of Resin

Infiltrated Composites under Low Velocity Impact - Experimental and Numerical

Studies," Key Engineering Materials, Trans. Tech Publications, Switzerland, Vol.

141-143 (1998), pp. 209-234.

53. Mahfuz, H., Lokesh, B., Vaidya, U. K. and Jeelani, S. "Experimental and Finite

Element Hybrid Stress Analysis of Thick Section S2-Glass Composites,"

Developments in Theoretical and Applied Mechanics, Vol. 9 (I 998), pp. 117-128.

54. Mahfuz, H., Mian, A. K. M., Vaidya, U. K., Brown, T. and Jeelani, S. "Finite Element

Study of the Fiber-Matrix Interface Behavior of [0/90] Laminated Composites Under

Tensile Loading," Journal of Materials Science, 33 (1998)2965-2973.

55. Vaidya, U. K., Kamath, M. V., Mahfuz, H. and Jeelani, S. "Low Velocity Impact

Response of Resin Infusion molded foam Filled Honeycomb Sandwich Composites,"

Journal of Reinforced Plastics and Composites, Vol. 17, No. 9, 1998, pp. 819-849.

56. Haque, A., Rahman, M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Tensile Behavior

of Woven Ceramic Matrix Composites at Room and Elevated Temperature: An

Experimental and Numerical Study," Key Engineering Materials, Vols. 164-165

11

(1999) pp. 341-344.

57. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. and Jeelani, S. "Stress Wave

Propagation through Fiber and Matrix in a Cylindrical Composite Coupon”, Physics

and Modern Topics in Mechan Topics in Mechanical and Electrical Engineering,

(ISBN: 960-8052-10-6), World Scientific and Engineering Society Press, pp. 151-

158, 1999.

58. Hosur, M. V., Vaidya, U. K., Abraham, A., Jadhav, N. and Jeelani, S. “Static and

High Strain Rate Compression Response of Thick Section Twill Weave S2-

Glass/Vinyl Ester Composites Manufactured by Affordable Liquid Molding

Processes”, Journal of Engineering Materials and Technology, Vol. 121, No. 4,

October 1999, pp. 468-475

59. Motuku, M., Janowski, G. M., Vaidya, U. K., Mahfuz, H., and Jeelani, S. “Low

Velocity Impact Characterization of Unreinforced Vinyl Ester 411-350 and 411- C50

Resin Systems," Polymer & Polymer Composites, Vol. 7, No. 6, 1999, pp. 383-407.

60. Vaidya, U. K., Kamath, M. V., Hosur, M. V., Mahfuz, H. and Jeelani, S.

"Manufacturing and Low Velocity Impact Response of Sandwich Composites

with Hollow and Foam Filled Z-Pin Reinforced Core," Journal of Composites

Technology and Research, JCTRER, Vol. 21, No.2, April 1999, pp. 84-97.

61. Vaidya, U. K., Hosur, M. V., Earl, D. and Jeelani, S. “Impact Response of Integrated

Hollow Core Sandwich Composite Panels”, Composites Part A: Applied science and

Manufacturing Vol. 31 (8), 2000 pp. 761-772.

62. Mahfuz, H., Zhu, Y., Haque, A., Vaidya, U. K. and Jeelani, S. "Investigation of High

Velocity Impact on Integral Armor Using Finite Element Method," International

Journal of Impact Engineering, Vol. 24, No. 2 (2000), pp. 203-217.

63. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. K. and Jeelani, S. “An Innovative

Technique for Measuring the High Strain Rate Response of Sandwich Composites,"

Composite Structures, 50 (2000) 279-285.

64. Mahfuz, H., Zaman, K., Hisham, M. Foy, C., Haque, A. and Jeelani, S. "Fatigue Life

Prediction of Thick-Section S2-Glass/Vinyl-Ester Composites under Flexural

Loading," Transaction of ASME, Journal of Engineering Materials and Technology,

Vol. 122, October 2000, pp. 402-408.

65. Motuku, M., Janowski, G. M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Damage

Evolution in Low-Velocity Impacted Unreinforced Vinyl Ester 411-350 and 411-C50

Resin Systems," Polymer Composites, No. 6, Vol. 21, December 2000, pp.878-899.

66. Hosur, M. V., Alexander, J. Vaidya U. K. and Jeelani, S. "High Strain Rate

Compression Response of Carbon/Epoxy Laminate Composites," Journal of

Composite Structures, 52 (2001), 405-417.

67. Mahfuz, H., Mamun, W., Austin, L., Haque, A. and Jeelani, S. "New Formulations

for Hopkinson Bar Technique to Extract a Response of the Constituent Material in

Composite Specimens," Journal of Materials: Design and Applications, Vol.

215,(2001) pp. 15-27.

68. Hosur, M. V., Abraham, A., Jeelani, S. and Vaidya, U. K. "Studies on the Influence

of Through-The-Thickness reinforcement on Low-Velocity and High Strain rate

response of Woven S2-Glass/Vinyl Ester Composites," Journal of Composite

Materials, Vol. 35, No. 12,(2001), 1111-1133.

69. Gama, B., Gillespie, J., Mahfuz, H., Bogetti, T., Fink, B. and Jeelani, S. "High

Strain Rate Behavior of Plain-Weave S-2 Glass/Vinyl ester Composites," Journal of

12

Composite Materials, Vol. 35, No. 13 (2001), pp. 1201-1228.

70. Mahfuz, H., Mamun, W. and Jeelani, S. "High Strain Rate Response of Sandwich

Composites; Effect of Core Density and Core-Skin Debond," Journal of Advanced

Materials, Vol. 34, No. 1, January (2002), pp. 22-26.

71. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. "Dynamic Mechanical Analysis

and Flexural Fatigue of PVC Foams," Composite Structures, 58 (2002), pp. 175-183.

72. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. "Dynamic Compression of Cellular

Cores: Temperature and Strain Rate Effects," Composite Structures, 58 (2002), pp.

505-512.

73. Mahfuz, H., Mamun, W. and Jeelani, S. "High Strain Rate Response of Sandwich

Composites; Effect of Core Density and Core-Skin Debond," Journal of Advanced

Materials, Vol. 34, No. 1, January (2002), pp. 22-26.

74. Kanny K., Mahfuz, H., Thomas, T. and Jeelani, S. "Dynamic Mechanical Analysis

and Flexural Fatigue of PVC Foams," Composite Structures, 58 (2002), pp. 175-183.

75. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. "Dynamic Compression of Cellular

Cores: Temperature and Strain Rate Effects," Composite Structures, 58 (2002), pp.

505-512.

76. Mahfuz, H., Gama, B., Das, P., Jeelani, S., Gillispie, J. and Fink, B., "Response of

S2-Glass/Vinyl Ester Composites under High Strain Rate Loading - An Experimental

and Finite Element Study," Journal of Advanced Materials, Vol. 35, No. 4(2003),

pp.36-43.

77. Kulkarni N., Mahfuz, H., Jeelani, S. and Carlsson, L. "Fatigue Crack Growth and

Life Prediction in Foam Core Sandwich Composites under Flexural Loading,"

Composite Structures, 59 (2003), pp. 499-505.

78. Haque, A., Hossain M. K., “Effects of Moisture and Temperature on High Strain

Rate Behavior of S2-Glass-Vinyl Ester Woven Composites,” Journal of Composite

Materials, Vol. 37 (7), (2003), pp. 627-647.

79. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S., "High

Strain Rate Compression Response of Affordable Woven Carbon/Epoxy Composites"

Journal of Reinforced Plastics and Composites, Vol. 22, No. 3, (2003), pp. 271-296.

80. Hosur, M. V., Islam, W., Jeelani, S., Vaidya, U. K., and Dutta, P. "Effect of

Temperature and Moisture on the High Strain Rate Response of Graphite/Epoxy

Composites," Journal of Engineering Materials and Technology, Vol. 125, (2003),

pp.1-8.

81. Hosur, M. V., Myers, D., Vaidya, U. K. and Jeelani, S. "Studies on the Repair of

Ballistic Impact Damage in S2-Glass/Epoxy Laminates," Composite Structures, 61,

No. 4 (2003), pp. 281-290.

82. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "Studies on

Impact Damage Resistance of Affordable Stitched Woven Carbon/Epoxy Composite

Laminates"' Journal of Reinforced Plastics and Composites, Vol. 22, No. 10 (2003),

pp.927-952.

83. Hosur, M. V., Adya, M, Vaidya, U. K., Mayer, A. and Jeelani, S. "Effect of Stitching

and Weave Architecture on the High Strain Rate Compression Response of

Affordable Woven Carbon/Epoxy Laminates," Composite Structures, 59 (2003), pp.

507-523.

84. Hosur, M. V., Karim, M. R. and Jeelani, S. "Experimental Investigation on the

Response of Stitched/Unstitched Woven S2-Glass/SC-15 Epoxy Composites under

13

Single and Repeated Low Velocity Impact Loading" Composite Structures, 61, No.

1-2 (2003), pp.89-102.

85. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "Off- Axis

High Strain Rate Characterization of Plain Weave Carbon/Epoxy Composites,"

Polymers and Polymer Composites, Vol. 11, No. 7 (2003), pp. 527-540.

86. Chakravarty, U., Mahfuz, H., Saha, M. and Jeelani, S.," Strain Rate Effects on

Sandwich Core Materials: An Experimental and Analytical Investigation," Acta

Materialia, 51 (2003) 1469-1479.

87. Mahfuz, H., Adnan, A., Vijaya Rangari, and Jeelani, S., "Carbon

Nanoparticles/Whiskers Reinforced Composites and their Tensile Response," 48th

International SAMPE Symposium, Long Beach CA, Vol. 48, May 11-15 (2003),

pp. 2559-2571.

88. Hosur, M. V., Adya, M., Vaidya, U. K., Dutta, P. and Jeelani, S. “Experimental

Studies on the High Strain Rate Compression Response of Woven Graphite/Epoxy

Composites at Room and Elevated Temperatures,” Journal of Reinforced Plastics and

Composites, Vol. 23, No. 5 (2004), pp. 491-514.

89. Hosur, M. V., Alexander, J., Vaidya, U.K., Mayer, A. and Jeelani, S. “Studies on the

Off-Axis High Strain Rate Compression Loading of Satin Weave Carbon/Epoxy

Composites," Composite Structures, Vol. 63 (2004), pp.75-85.

90. Hosur, M. V., Karim, R. M., and Jeelani, S. "On the Response of Stitched S2-

Glass/Epoxy Composites to High Strain Rate Compression Loading," Polymer

and Polymer Composites, Vol. 12, No. 3 (2004), pp.183-196.

91. Hosur, M. V., Vaidya, U. K., Ulven, C. and Jeelani, S. "Performance of

Stitched/Unstitched Woven Carbon/Epoxy Composites Under High Velocity Impact

Loading," Composite Structures, Vol. 64, No. 3-4, (2004), pp. 455-466.

92. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Experimental

Studies on the Dynamic Punch Shear Characterization of Satin Weave

Graphite/Epoxy Composites," Materials Science Engineering A., 368, (2004), pp.

269-279.

93. Hosur, M. V., Abdullah, M. and Jeelani, S. "Manufacturing and Low Velocity Impact

Characterization of Hollow-Core Sandwich Composites with Hybrid Face sheets,"

Composite Structures, Vol. 65, No.1 (2004), pp. 103-115.

94. Hosur, M. V., Karim, R. and Jeelani, S. "Studies on Stitched Woven S2-

Glass/Epoxy Laminates under Low Velocity and Ballistic Impact Loading," Journal

of Reinforced Plastics and Composites, Vol. 23, No. 12 (2004), pp. 1313- 1324.

95. Hosur, M. V., Abdullah, M. and Jeelani, S. "Studies on Low-Velocity Impact

Response of Woven Hybrid Composites," Composite Structures, Vol. 67, No. 3

(2004), pp. 253-262.

96. Hosur, M. V., Abdullah, M. and Jeelani, S. "Manufacturing and Low Velocity Impact

Characterization of Foam-Filled 3-D Integrated Core Sandwich Composites with

Hybrid Face Sheets," Composite Structures, Vol. 69, No. 2 (2004), pp. 167-181.

97. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S., "Fatigue of Cross-linked and

Linear PVC Foams under Shear Loading," Journal of Reinforced Plastics and

Composites, Vol. 23 No. 6 (2004), pp. 601-612.

98. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S.," High Strain Rate Response of

Cross-linked & Linear PVC Foams," Journal of Reinforced Plastics and Composites,

Vol. 23, No. 7 (2004), pp. 739-749.

14

99. Kulkarni, N., Mahfuz, H. and Jeelani, S., “Fatigue Failure Mechanism and Crack

Growth in Foam Core Sandwich Composites under Flexural Loading,” Journal of

Reinforced Plastics and Composites, Volume 23, No. 1(2004), pp. 83-94.

100. Thomas, T., Mahfuz, H., Kanny, K., and Jeelani, S.," Dynamic Compression of

Sandwich Composites at Sub-Ambient Temperatures," Journal of Composite

Materials, Vol. 38, No. 8 (2004), pp. 641-654.

101. K., Mahfuz, H., Thomas, T., and Jeelani, S, "Static and Dynamic Characterization of

Polymer Foams under Shear Loads, Journal of Composite Materials, Vol. 3, No. 8

(2004), pp. 629-640.

102. Mahfuz, H., Rangari, V., Islam, M., and Jeelani, S.," Fabrication, Synthesis and

Mechanical Characterization of Nanoparticles Infused Polyurethane Foams,"

Composites Part A: Applied Science and Manufacturing, Vol. 35 No. 4 (2004), pp.

453-460.

103. Mahfuz, H., Islam, M., Rangari, V., Saha, M. and Jeelani, S., "Response of Sandwich

Composites with Nanophased Cores under Flexural Loading," Composites Part B: 35

(2004) 543-550.

104. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, "Carbon Nanoparticles/Whiskers

Reinforced Composites and their Tensile Response," Composites Part A: Applied

Science and Manufacturing, Vol. 35 (2004) 519-527.

105. Mahfuz, H., Majumdar, P., Saha, M. and Jeelani, S., "Integral Manufacturing of

Composite Skin-Stringer Assembly and their Stability Analyses," Applied Composite

Materials, 11 (3): (2004)155-171.

106. Chisholm, N., Mahfuz, H., Rangari, V., Ashfaq, A. and Jeelani, S., “Fabrication and

Mechanical Characterization of Carbon/Epoxy Nanocomposites,” Composite

Structures 67 (2005) 115-124.

107. Saha, M., Joarder, C., Mahfuz, H., Jeelani, S., Srinivasgupta, D., Joseph, B., Thomas,

M., and Christensen, S., “Manufacturing and Tensile Characteristics of Integral

Sandwich Tee Joints,” Journal of Advanced Materials, 37(1) (2005), 53-60.

108. Mahfuz, H., Baseer, M.A., Rangari, V., Jeelani, S. “Fabrication, Characterization and

Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE Journal,

41(2) (2005), 40-48.

109. Saha, M., Mahfuz, H., Chakravarty, U., Uddin, M., Kabir, M., Jeelani, S., “Effect of

Density, Microstructure, and Strain Rate on Compression Behavior of

Polymeric Foams,” Materials Science and Engineering A, 406(1-2) (2005), 328-

336.

110. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, “Manufacturing and

Characterization of Carbon Nanotube/Polyethylene Composites,” International

Journal of Nanoscience (IJN), 4(1) (2005), 55-72.

111. Mahfuz, H., Islam, S., Saha, M., Carlsson, L., and Jeelani, S., “Buckling of Sandwich

Composites; Effects of Core-Skin Debonding and Core Density," Applied Composite

Materials, 2(2) (2005), 73-91.

112. Rodgers, R., Mahfuz, H., Rangari, V., Chisholm, N., and Jeelani, S., “Infusion of

Nanoparticle into SC-15 Epoxy; an Investigation of Thermal and Mechanical

Response," Macromolecular Materials & Engineering, 290(5) (2005), 423-429.

113. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Dynamic

Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room

and Elevated Temperatures,” Composite Structures, 70(3) (2005), 295-307.

15

114. Saha, M., Joarder, C., Mahfuz, H., Jeelani, S., Srinivasgupta, D., Joseph, B., Thomas,

M., and Christensen, S., “Manufacturing and Tensile Characteristics of Integral

Sandwich Tee Joints,” Journal of Advanced Materials, 37(1) (2005), 53-60.

115. Mahfuz, H., Baseer, M.A., Rangari, V., Jeelani, S. “Fabrication, Characterization and

Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE Journal,

41(2) (2005), 40-48.

116. Saha, M., Mahfuz, H., Chakravarty, U., Uddin, M., Kabir, M., Jeelani, S., “Effect of

Density, Microstructure, and Strain Rate on Compression Behavior of Polymeric

Foams,” Materials Science and Engineering A, 406(1-2) (2005), 328- 336.

117. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, “Manufacturing and

Characterization of Carbon Nanotube/Polyethylene Composites,” International

Journal of Nanoscience (IJN), 4(1) (2005), 55-72.

118. Mahfuz, H., Islam, S., Saha, M., Carlsson, L., and Jeelani, S., “Buckling of Sandwich

Composites; Effects of Core-Skin Debonding and Core Density," Applied Composite

Materials, 2(2) (2005), 73-91.

119. Rodgers, Rene, Mahfuz, H., Rangari, V., Chisholm, N., and Jeelani, S., “Infusion of

Nanoparticle into SC-15 Epoxy; an Investigation of Thermal and Mechanical

Response," Macromolecular Materials & Engineering, 290(5) (2005), 423-429.

120. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Dynamic

Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room

and Elevated Temperatures,” Composite Structures, 70(3) (2005), 295-307.

121. Hosur, M. V., Abdullah, M., and Jeelani, S. “Manufacturing and Low-Velocity

Impact Characterization of Foam Filled 3-D Integrated Core Sandwich Composites

with Hybrid Face Sheets,” Composite Structures, 69(2) (2005), 167-181.

122. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Studies on the

Low-Velocity Impact Response of Woven Hybrid Composites,” Composite

Structures, 67(3) (2005), 253-262.

123. Zhou, Y., Mahfuz, H., and Jeelani, S., “Numerical Simulation for High Strain

Rate Failure Process of Unidirectional SiCf/Al Composites,” International Journal of

Damage Mechanics, 14(4) (2005), 321-341.

124. Farhana, P., Zhou, Y., Rangari, V., and Jeelani, S., “Testing and Evaluation on the

Thermal and Mechanical properties of Carbon Nano Fiber reinforced SC-15 Epoxy,”

Materials Science and Engineering A, 405(1-2) (2005), 246-253.

125. Zhou, Y., Rangari, V., Mahfuz, H., Jeelani, S., and P. K. Mallick, “Thermal and

Mechanical behavior of Polypropylene, Talc-filled Polypropylene and Polypropylene

Nanocomposites,” Materials Science and Engineering A, 402(1-2) (2005), 109-117.

126. Abdullah, M., and Jeelani, S. “Manufacturing and Low-Velocity Impact

Characterization of Foam Filled 3-D Integrated Core Sandwich Composites with

Hybrid Face Sheets,” Composite Structures, 69(2) (2005), 167-181.

127. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Studies on the

Low-Velocity Impact Response of Woven Hybrid Composites,” Composite

Structures, 67(3) (2005), 253-262.

128. .Zhou, Y., Mahfuz, H., and Jeelani, S., “Numerical Simulation for High Strain

Rate Failure Process of Unidirectional SiCf/Al Composites,” International Journal of

Damage Mechanics, 14(4) (2005), 321-341.

129. Zhou, Y., Pervin, F., Biswas, M., Rangari, V., and Jeelani, S., "Fabrication and

Characterization of Montmorillonite Clay-filled SC-15 Epoxy," Materials Letters,

16

60(7) (2006), 869-873.

130. Zhou, Y., Baseer, M., Mahfuz, H., and Jeelani, S., "Monte Carlo Simulation on

Tensile Failure Process of Unidirectional Carbon Fiber Reinforced Nano-Phased

Epoxy," Materials Science and Engineering A, 420(1-2) (2006), 63-71.

131. Zhou, Y., Pervin, P., Rangari, V., and Jeelani, S., Fabrication and evaluation of carbon

nano fiber filled carbon/epoxy composite Materials Science and Engineering: A,

426(1-2) (2006), 221-228.

132. Hassan, M., Zhou, Y., Mahfuz, S., and Jeelani, S., "Effect of SiO2 nanoparticle on

thermal and tensile behavior of nylon-6," Materials Science and Engineering: A,

429(1-2) (2006), 181-188.

133. Mahfuz, H., Adnan, A., Rangari, V., Hasan, M., Jeelani, S., Wright, W. J., and

Deteresa, S. J., "Enhancement of Strength and Stiffness of Nylon 6 Filaments through

Carbon Nanotubes Reinforcement," Applied Physics Letters, 88(2006), 083119.

134. Chowdhury, F.H., Hosur, M.V., Jeelani, S., "Studies on the Flexural and

Thermomechanical Properties of Woven Carbon/Nanoclay-Epoxy Laminates,"

Materials Science and Engineering A, 421, 2006, 298-306.

135. Hosur, M.V., Waliul Islam, S.M., and Jeelani, S., "Dynamic Punch Shear

Characterization of Twill Weave Graphite/Epoxy Composites," Polymers and

Polymer Composites, Vol. 14, No. 2, 2006, pp. 135-143.

136. Rangari, V., Tarig A. Hassan, Yuanxin Zhou, Hassan Mahfuz1 and Shaik Jeelani,

“Cloisite Clay Infused Phenolic Foam Nanocomposite,” Journal of Applied Polymer

Science, 103, 308-314, 2007.

137. Mahfuz, Hassan; Hasan, Mohammad M.; Rangari, V., Jeelani, Shaik. “Reinforcement

of nylon-6 filaments with SiO2 nanoparticles and comparison of Young's modulus

with theoretical bounds,” Macromolecular Materials and Engineering, 292 (4), 437-

444, 2007.

138. Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, Tariq Al-Saadi, Rangari, V.,

Shaik Jeelani. “Enhancement of strength and stiffness of epoxy-based composites

using nanoparticle infusion and high magnetic fields,” Materials Letters, 61, 2535–

2539, 2007.

139. Rangari, V., Hassan, T., Zhou, Y., Mahfuz, H., Jeelani, and Prorok, B., “Cloisite Clay-

Infused Phenolic Foam Nanocomposites,” Journal of Applied Polymer Science, Vol.

103, 308-314 (2007).

140. Mahfuz, H., Hasan, M., Rangari, V., and Jeelani, S., “Reinforcement of Nylon 6

Filaments with SiO2 Nanoparticles and Comparison of Young’s Modulus with

Theoretical Bounds,” Macromolecular Materials & Engineering 2007, 292, 437-

444.

141. Adnan, A., Sun, C.T., and Mahfuz, H., “A molecular Dynamics Simulation Study to

Investigate the Effect of Filler Size on Elastic Properties of Polymer

Nanocomposites,” Composites Science and Technology 67 (2007) 348-356.

142. M. V. Hosur, M. Abdullah, S. Jeelani, “Dynamic Compression Behavior of Integrated

Core Sandwich Composites,” Materials Science and Engineering-A, Vol. 445-446,

2007, pp. 54-64.

143. M. V. Hosur, K. Jain, F. Chowdhury, S. Jeelani, M. R. Bhat, C. R. L. Murthy,

“Low-Velocity Impact Response of Carbon/Epoxy Laminates Subjected to Cold- Dry

and Cold-Moist Conditioning,” Composite Structures, Vol. 79, 2007, pp. 300-

311.

17

144. M. V. Hosur, F. Chowdhury, and S. Jeelani, “Processing, Impact Response and

Damage Characterisation of Plain-Weave Carbon/Epoxy-Nanoclay

Nanocomposites,” Polymer and Polymer Composites, Vol. 15, No. 6, 2007, pp.425-

435.

145. Yuanxin Zhou, Farhana Pervin, Lance Lewis and Shaik Jeelani, “Experimental study

on the thermal and mechanical properties of multi-walled carbon nanotube- reinforced

epoxy,” Materials Science and Engineering: A, Volume 452-453, 2007 pp. 657-664.

146. Yuanxin Zhou, Sajedur Rahman Akanda, Shaik Jeelani and Thomas E. Lacy,

Nonlinear Constitutive Equation for Vapor-Grown Carbon Nanofiber-Reinforced SC-

15 Epoxy at Different Strain Rate, Materials Science and Engineering: A, 465, n 1-2,

Sep 15, 2007, p 238-246.

147. M. V. Hosur, F. Chowdhury, and S. Jeelani, “Low-Velocity Impact Response and

Ultrasonic NDE of Woven Carbon/Epoxy-Nanoclay Nanocomposites,” Journal of

Composite Materials, Vol. 41, No. 18, 2007, pp. 2195-2212.

148. Yuanxin Zhou, Farhana Pervin, Shaik Jeelani, “Effect vapor grown carbon nanofiber

on thermal and mechanical properties of epoxy,” Journal of Materials Science, v 42,

n 17, August, 2007, p 7544-7553.

149. F. H. Chowdhury, M.V. Hosur, S. Jeelani, “Investigations on the Thermal and

Flexural Properties of Plain Weave Carbon/Epoxy-Nanoclay Composites by Hand-

Layup Technique,” Journal of Materials Science, Vol. 42, No. 8, April, 2007, pp.

2690-2700.

150. Hasan, Yuanxin Zhou and Shaik Jeelani, “Thermal and tensile properties of aligned

carbon nanofiber reinforced polypropylene,” Materials Letters, Volume 61, Issue

4-5, February 2007, Pages 1134-1136.

151. Yuanming Xia, Ying Wang, Yuanxin Zhou and Shaik Jeelani, “Effect of strain

rate on tensile behavior of carbon fiber reinforced aluminum laminates ,”

Materials Letters, Volume 61, Issue 1, January 2007, Pages 213-215.

152. Yuanxin Zhou, Yuanming Xia, Ying Wang and Shaik Jeelani, “Experimental

study on tensile behavior of carbon fiber and carbon fiber reinforced aluminum at

different strain rate,” Applied Composite Materials, Volume 14, Number 1, January,

2007, pp. 17-31.

153. Rangari, V. T. A. Hassan, Yuanxin Zhou; Hassan Mahfuz, Shaik Jeelani; B. C.

Prorok, “Cloisite clay-infused phenolic foam Nanocomposites,” Journal of Applied

Polymer Science, v 103, n 1, Jan 5, 2007, p 308-314.

154. Theotokoglou, E.E., Hortis. D., Carlsson, L.A. and Mahfuz, H., “Numerical Study of

Fractured Sandwich Composites under Flexural Loading,” Journal of Sandwich

Structures and Materials 2008; 10; 75.

155. M. V. Hosur, A. A. Mohammed, S. Zainuddin, and S. Jeelani, “Impact Performance

of Nanophased Foam Core Sandwich Composites,” Materials Science and

Engineering, A Vol. 498, No. 1-2, 2008, pp. 100-109.

156. M. V. Hosur, A. A. Mohammed, and S. Jeelani, “Processing of Nanoclay Filled

Sandwich Composites and their Response to Impact Loading,” Journal of Reinforced

Plastic and Composites, Vol. 27, No 8, 2008, pp. 797-818.

157. Hosur M. V., Mayo Jr. J. B., Wetzel E., and Jeelani S., “Studies on the Fabrication

and Stab Resistance Characterization of Novel Thermoplastic-Kevlar Composites,”

Advanced Structural and Functional Materials for Protection, Solid State Phenomena

Vol. 136, 2008, pp. 83-92.

18

158. Ingram J., Yuanxin Zhou, Jeelani S., Lacy T., and Horstmeyer M.F., “Effect of strain

rate on tensile behavior of polypropylene and carbon nanofiber filled polypropylene,”

Materials Science and Engineering: A, 489(2008) Pages 99-106.

159. Jones I. K., Yuanxin Zhou, Jeelani S., Mabry J.M., “Effect of polyhedral- oligomeric-

sil-sesquioxanes on thermal and mechanical behavior of SC-15 epoxy,” Express

Polymer Letters, (2)2008: 494-501.

160. Rangari, V., Tarig A. Hassan, Clifton Mayo and Shaik Jeelani, “Titanium carbide

infused phenolic balsa foam nanocomposite,” International Journal of Nanoscience,

7, 235-243, 2008.

161. Rangari, V., Mohammed Yousuf, Shaik Jeelani, Merlyn X. Pulikkathara and Valery

N. Khabashesku, “Alignment of carbon nanotubes and reinforcing effects in Nylon-

6 polymer composite fibers,” Nanotechnology, 19, 245703-245712, 2008.

162. Hassan Mahfuz, Mohammad Hasan, Vinod Dhanak, Graham Beamson, Justin

Stewart, Rangari, V., and Shaik Jeelani, “Enhancing the properties of nylon 6

filaments with functionalized silica nanoparticles,” Nanotechnology, 19, 445702-

445706, 2008.

163. M. V. Hosur, A. A. Mohammed, S. Zainuddin and S. Jeelani, “Processing of Nanoclay

Filled Sandwich Composites and their Response to Low-Velocity Impact Loading,”

Composite Structures, Vol. 82, 2008, pp. 101-116.

164. Ayorinde, E., Gibson, R., Kulkarni, S., Deng, F., Mahfuz, H., Islam, S., Jeelani, S.,

“Reliable low-cost NDE of Composite Marine Sandwich Structures,” Composites:

Part B, 39 (2008) 226-241.

165. Rangari, V., Mohammad, I, Jeelani Yuanxin Zhou and Shaik Jeelani, “Fabrication

and characterization of MWCNT/thermoplastic microsphere nanocomposite foams,”

International Journal of Nanoscience, 7, 161-169, 2008.

166. Yuanxin Zhou, Peixuan Wu, Zhongyang Cheng, Joranda Ingram and Shaik Jeelani,

“Improvement in electrical, thermal and mechanical properties of epoxy by filling

carbon,” Express Polymer Letter, 2008, 2(1), 40-48.

167. Rangari, V., Shaik, M, Mahfuz, H. and Jeelani, S., “Fabrication and Characterization

of High Strength Nylon-6/Si3N4 Polymer Nanocomposites Fibers,” Materials Science

& Engineering A, (2008) DOI:10.1016/j.msea.2008.09.014.

168. B. Bey, Yuanxin Zhou, Shaik Jeelani, Ashok Kumar and L.D. Stephenson, “Nonlinear

constitutive equation for temperature degraded unidirectional carbon fiber

reinforced epoxy,” Materials Letters, Volume 62, Issues 21-22, 15 August 2008,

Pages 3659-3662.

169. Yuanxin Zhou, Farhana Pervin, Shaik Jeelani and P.K. Mallick, “Improvement in

mechanical properties of carbon fabric-epoxy composite using carbon nanofibers,”

Journal of Materials Processing Technology, Volume 198, Issues 1-3, 3 March

2008, pp. 445-453.

170. Yuanxin Zhou, Farhana Pervin, Lance Lewis and Shaik Jeelani, “Fabrication and

characterization of carbon/epoxy composites mixed with multi-walled carbon

nanotubes,” Materials Science and Engineering: A, Volume 475, Issues 1-2, 25

February 2008, pp. 157-165.

171. Yuanxin Zhou, M.I. Jeelani, and Shaik Jeelani, “Fabrication and characterization of

carbon/epoxy composites mixed with multi-walled carbon nanotubes,” Materials

Science and Engineering: A, Volume 475, Issues 1-2, 25 February 2008, pp. 157-165.

172. Seyhan Boyoglu, Komal Vig, Shreekumar Pillai, Rangari, V., Vida A. Dennis,

19

Praseetha Subbarayan, Shree R. Singh, “Enhanced Delivery and Expression of

Nanoencapsulated DNA Vaccine Vector,” Nanomedicine: Nanotechnology, Biology

and Medicine, Volume 5, Issue 4, December 2009, Pages 463-472.

173. Jessie Mayo, Eric Wetzel, Mahesh Hosur, Shaik Jeelani, “Stab and Puncture

Characterization of Thermoplastic-Impregnated Aramid Fabrics,” International

Journal of Impact Engineering, Volume 36, Issue 9, September 2009, Pages 1095-

1105.

174. Rangari, V., Tarig A Hassan, Quentin Mayo and Shaik Jeelani, “Size reduction of

WO3 nanoparticles by ultrasound irradiation and its applications in structural

nanocomposites,” Composite Science and Engineering, 69, 2009, 2293-2300.

175. Mahesh V. Hosur, Orion Gebremedin, Shaik Jeelani, “Processing and Performance

Evaluation of Nanoclay Infused EPON 828,” Polymer & Polymer Composites, 17

(3), 2009, pp. 151-160.

176. Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, Tariq Al-Saadi, Rangari, V.,

Shaik Jeelani, “Reinforcement of SC-15 epoxy with CNT/CNF under high magnetic

field: an investigation of mechanical and thermal response,” J Mater Sci, 44:1113–

1120, 2009.

177. Rangari, V., Mohammed Y. Shaik and Shaik Jeelani, “Fabrication and

characterization of high strength Nylon-6/Si3N4 polymer nanocomposites fibers,”

Materials Science and Engineering A, 500, 92-97, 2009.

178. S. Zainuddin, M. V. Hosur, Y. Zhou, A. Kumar, and S. Jeelani, “Durability

studies of montmorillonite clay filled epoxy composites under different

environmental conditions,” Materials Science and Engineering, 507, 2009, pp.

117–123.

179. Mahfuz, H., Clements, F., Rangari, V., Dhanak, V. and Beamson, G., “Enhanced

Stab Resistance with Functionalized Silica Nanoparticles,” Journal of Applied

Physics 105, 064307 (2009).

180. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and performance

of nanophased braided carbon/epoxy composites,” Materials Science and

Engineering B doi:10.1016/j.mseb.2009.10.015, 2009.

181. Md. A. Bhuiyan, M. V. Hosur, S. Jeelani, “Low –Velocity Impact Response of

Sandwich Composites with Nanophased Foam Core and Biaxial (±45°) Braided Face

Sheets,” Composites Part B: Engineering, Volume 40, Issue 6, September 2009,

Pages 561-571.

182. Mahfuz, H., Zainuddin, S., Parker, M.R., Al-Saadi, T., Rangari, V., and Jeelani,

S., “Reinforcement of SC-15 Epoxy with CNT/CNF under High Magnetic Field –

An Investigation of Mechanical and Thermal Response,” Journal of Materials

Science, Volume 44, Number 4, January 2009, Pages 1113-1120.

183. S. Zainuddin, M. V. Hosur, A. Kumar, and S. Jeelani, “Durability Study of

Neat/Nanophased GFRP Composites Subjected to Different Environmental

Conditioning,” Materials Science and Engineering A, 527, 2010, pp. 3091-3099.

184. Yuanxin Zhou, Evert White, Mahesh Hosur, Shaik Jeelani, “Effect of particle size

and weight fraction on the flexural strength and failure mode of TiO2 particles

reinforced epoxy,” Materials Letters, 64, 2010, pp. 806-809.

185. Mahesh V. Hosur, Tamanna Rahman, Shaik Jeelani, “Mechanical and Thermal

Properties of Amine Functionalized Multi-walled Carbon Nanotubes Epoxy Based

Nanocomposite,” Composite Interfaces, Vol. 17, 2010, pp. 197-215.

20

186. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and performance

of nanophased braided carbon/epoxy composites,” Materials Science and

Engineering B, 168, 2010, pp. 22-29.

187. Tarig A Hassan, Rangari, V., and Shaik Jeelani, “Synthesis, processing and

characterization of shear thickening fluid (STF) impregnated fabric composites,”

Mat Sci &Eng-A, 527, 2892-2899, 2010.

188. Wanda D. Jones, Rangari, V., and Shaik Jeelani, “Synthesis and characterization

of (Fe3O4/MWCNTs) / Epoxy Nanocomposites,” J. Applied Polymer Science,

116, 2783-2792, 2010.

189. Rangari, V., Mohammad, Ghouse; Jeelani, Shaik; Butenko, Yuri; Dhanak, Vinod.

“Synthesis and characterization of diamond coated CNTs and their reinforcement in

Nylon-6 single fiber,” ACS Applied Materials & Interfaces 2010, 2 (7), 1829-1834.

190. Rangari, V., Ghouse M. Mohammad, Shaik Jeelani, Angel Hundley, Komal Vig,

Shree Ram Singh and Shreekumar Pillai, “Synthesis of Ag/CNTs hybrid

nanoparticles and fabrication of their Nylon-6 polymer nanocomposite fibers for

antimicrobial applications,” Nanotechnology, 21, 095102, 2010.

191. Tarig A. Hassan, Rangari, V., and Shaik Jeelani., “Sonochemical synthesis and

rheological properties of shear thickening dispersions,” J Ultrasonic and

sonochemistry, Volume 17, Issue 5, June 2010, Pages 947-952.

192. Rangri, V., Mohammad S. Bhuyan, Shaik Jeelani, “Microwave Processing and

Charactering of EPON 862/CNTs Nanocomposites,” Mat Sci & Eng –B, Volume

168, Issues 1-3, 15 April 2010, Pages 117-121.

193. Yuanxin Zhou, Yang Wang, Yuanming Xia, and Shaik Jeelani, Tensile behavior of

carbon fiber bundles at different strain rates, Materials Letters, Volume 64, Issue

3, 15 February 2010, Pages 246-248.

194. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan

Trovillion, and Yadira Perez, “Processing and characterization of epoxy

nanocomposites with MWCNT’s/CNF’s using thinky and 3-roll shear mixing

techniques,” Revista Matéria, 15, pp. 247–253, 2010.

195. S. Zainuddin, M. V. Hosur, Y. Zhou, A. Tcherbi-Narteh, Ashok Kumar and S.

Jeelani, “Experimental and Numerical Investigations on Flexural and Thermal

Properties of Nanoclay-Epoxy Nanocomposites,” Materials Science & Engineering

A, Vol. 527, 2010 pp. 7920–7926.

196. Rangari, V., Mohammad Y.Shaik, Ghouse M. Mohammad, Shaik Jeelani,

Reinforcement of Si3N4 nanoparticles in Polypropylene single fibers through

melt extrusion process and their properties, Journal of Applied Polymer Science ,

121, 3,1512–1520, 2011.

197. Rangari, V., Mohammad S. Bhuyan, Shaik Jeelani, Comparative study of microwave

and thermal curing of high temperature epoxy/CNTs polymer nanocomposites and

their properties, International Journal of Nanoscience 10 (6),1225-1230, 2011.

198. M. K. Hossain, M.W. Dewan, M. V. Hosur, and S. Jeelani, “Physical, Mechanical,

and Degradability Properties of Chemically Treated Jute Fiber Reinforced

Biodegradable Nanocomposites,” Journal of Engineering Materials and Technology

(JEMT), Vol. 133, October 2011, pp. 041003:1-7.

199. M. K. Hossain, K. A. Imran, M. V. Hosur, and S. Jeelani, “Degradation of Mechanical

Properties of Conventional and Nanophased Carbon/Epoxy Composites in Seawater,”

http://onlinelibrary.wiley.com/doi/10.1002/app.v121.3/issuetoc

http://onlinelibrary.wiley.com/doi/10.1002/app.v121.3/issuetoc

http://www.worldscinet.com/ijn/10/1006/S0219581X111006.html

21

Journal of Engineering Materials and Technology (JEMT), Vol. 133, October 2011,

pp. 041004:1-6.

200. Chinedu U. Okoro, Mohammad K. Hossain, Mahesh Hosur, and Shaik Jeelani,

“Mechanical Characterization of XD-Grade Carbon Nanotube/Epon 862 Processed

by Dual Phase Dispersion Technique,” Journal of Engineering Materials and

Technology (JEMT), Vol. 133, October 2011, pp. 041009:1-4.

201. M. K. Hossain, M. W. Dewan, M. V. Hosur, and S. Jeelani, “Effect of Surface

Treatment and Nanoclay on Thermal and Mechanical Performances of Jute/Biopol

Green Composites,” Journal of Reinforced Plastics and Composites, Vol. 30, N0. 22,

2011, pp. 1841-1856.

202. Tiffany Williams, Mahesh Hosur, Merlin Theodore, Anil N. Netravali, Vijaya

Rangari and Shaik Jeelani, “Time Effects on Morphology and Bonding Ability in

Mercerized Natural Fibers for Composite Reinforcement,” International Journal of

Polymer Science, vol. 2011, Article ID 192865, doi:10.1155/2011/192865.

203. Mohammad K. Hossain, Mohammad W. Dewan, Mahesh Hosur and Shaik Jeelani,

“Mechanical performances of surface modified jute fiber reinforced biopol

nanophased green composites,” Composites, Part B., 42 (2011) 1701-1707.

204. Mohammad K Hossain, Kazi Al Imran, Mahesh Hosur and Shaik Jeelani, “Effect of

Seawater on Thermal Behavior of Conventional and Nanophased Carbon/Epoxy

Composites,” Cambridge Journal Online, Published online March 14, 2011.

205. Mohammad K Hossain, Mohammad W Dewan, Mahesh Hosur and Shaik Jeelani,

“Thermal and Mechanical Characterization of Jute-Biopol Nanophased Green

Composites,” Cambridge Journal Online 2011, DOI: 10.1557/opl.2011.169,

published online January 28, 2011

206. Muhammad E. Hossain, Mohammad K. Hossain, Mahesh V. Hosur and Shaik Jeelani,

“Study of Mechanical Responses and Thermal Expansion of CNF-modified Polyester

Nanocomposites Processed by Different Mixing Systems,” Cambridge Journal

Online, DOI:10.1557/opl.2011.111, published online January 28, 2011.

207. S. Zainuddin, M. V. Hosur, R. Barua, Ashok Kumar and S. Jeelani, “Effects of

ultraviolet radiation and condensation on static and high strain rate compression

behavior of nanoclay infused glass/ epoxy composites,” Journal of Composite

Materials, 45(18) 2011, pp. 1901-1918.

208. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani, “Influence of

Functionalization on Properties of MWCNT-Epoxy Nanocomposites,” Materials

Science & Engineering A, Mater. Sci. Eng. A, Volume 528, Issue 3, 25 January

2011, pp. 1192-1200.

209. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani, “Effects of

functionalisation on curing and decomposition behaviour of Epoxy-MWCNT

Nanocomposites,” Polymer and Polymer Composites, Vol. 20, No. 4, 2012, pp. 343-

352.

210. M. K. Hossain, M. E. Hossain, M. V. Hosur, and S. Jeelani, “Flexural and

Compression Response of Woven E-Glass/Polyester-CNF Nanophased Composites,”

Composites A, 42, 2011, 1174-1182.

211. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion and

Shaik Jeelani, “Rheology, Flexure and Thermomechanical Characterization of

Epoxy/CNF Nanocomposites: Effect of Dispersion Techniques,” Polymers and

Polymer Composites, Vol. 20, No. 6, 2012, pp. 517-530.

22

212. Muhammad M. Rahman, Mahesh Hosur, Shaik Zainuddin, Kailash C. Jajam, Hareesh

V. Tippur, Shaik Jeelani, “Mechanical characterization of epoxy composites modified

with reactive polyol diluent and randomly-oriented amino-functionalized

MWCNTs,” Polymer Testing, 31, 2012, pp. 1083-1093.

213. Muhammad M. Rahman, Mahesh Hosur, Adriane G. Ludwick, Shaik Zainuddin,

Ashok Kumar, Jonathan Trovillion, Shaik Jeelani, “Thermo-mechanical behavior of

epoxy composites modified with reactive polyol diluent and randomly-oriented

amino-functionalized multi-walled carbon nanotubes,” Polymer Testing, 31, 2012,

pp. 777-784.

214. M.M. Rahman, S. Zainuddin, M. V. Hosur, J.E. Malone, M.B.A. Salam, Ashok

Kumar, and S. Jeelani, “Improvements in mechanical and thermo-mechanical

properties of E-glass/epoxy composites using amino functionalized MWCNTs,”

Composite Structures, 94, 2012, pp. 2397-2406.

215. Yuanxin Zhou, Mahesh Hosur, Shaik Jeelani and P. K. Mallick, “Fabrication and

Characterization of Carbon Fiber Reinforced Clay/Epoxy Composite,” Journal of

Materials Science, 47: 2012, 5002-5012. DOI 10:1007/s 10853-012-6376-4.

216. Tarig A. Hassan, Vijay K. Rangari, Rohit K. Rana and Shaik Jeelani, Sonochemical

effect on size reduction of CaCO3 nanoparticles derived from waste Eggshells,

Ultrasonics Sonochemistry, 20, 5, 1308-1315, 2013.

217. Tarig hasan, Vijaya K. Rangari and Shaik. Jeelani, Mechanical and thermal

properties of bio-based CaCO3/Soybean based hybrid unsaturated polyester

nanocomposites, Journal of Applied Polymer Science 130,1442-1452, 2013 (Cover

page article). 218. Nydeia W. Bolden, Vijaya K. Rangari and Shaik Jeelani Seyhan Boyoglu Shree R.

Singh, Synthesis and evaluation of magnetic nanoparticles for biomedical

applications, Journal of nanoparticles doi: 10.1002/app.39227, 2013.

219. Tarig A. Hassan, Vijay K. Rangari, Shaik Jeelani, Sonochemical Synthesis and

Characterization of Bio-Based Hydroxyapatite nanoparticles, Int. J. Nano and

Biomaterials, 5, 5(2-3), pp. 103–112.

220. Vijaya K Rangari, Rahman Samsur, and Shaik Jeelani, Mechanical, thermal, and

conducting properties of CNTs / Bio-degradable Polymer Thin films, Journal of

Applied Polymer Science, 129: 1249–1255, 2013.

221. Vijaya K. Rangari Mohammed Yousuf and Shaik Jeelani, Synthesis and

characterization of SiC/Si3N4 hybrid nanoparticles and their applications in polymer

single fibers, J.Composites, 2013, Article ID 462914, 11 pages,

10.1155/2013/462914.

222. Tarig. A. Hassan, Vijaya K. Rangari, Fedric Baker and Shaik Jeelani, Synthesis of

hybrid SiC/SiO2 Nanoparticles and their polymer nanocomposites, International

Journal of Nanoscience, Vol 12, No 2, 1350008-1350015, 2013. 223. Vijaya K. Rangari, Ghouse M Mohammad, Boyoglu, Seyhan, Shaik Jeelani,

Synthesis of hybrid ZnO/CNTs nanoparticles and their reinforcement in Nylon-6

polymer fibers, Journal of Applied Polymer Science, 129, 1, 121–129, 2013.

224. R. Samsur, V. K. Rangari, S. Jeelani, L. Zhang and Z.Y. Cheng, Fabrication of CNTs

grown woven carbon fiber/epoxy composites and their electrical and mechanical

properties, J.Appl Phys. 113, 214903, 2013.

23

225. Mohammad Washim Dewan, Mohammad Kamal Hossain, Mahesh Hosur, and Shaik

Jeelani, “Thermo-Mechanical Properties of Alkali Treated Jute-Polyester/Nanoclay

Biocomposites Fabricated by VARTM Process,” accepted for publication in Applied

Polymer Science, 128 (6): 4110-4123, June 15, 2013.

226. M. K. Hossain, M. E. Hossain, M.W. Dewan, M. V. Hosur, and S. Jeelani, “Effects

of Carbon Nanofibers (CNFs) on Thermal and Interlaminar Shear Responses of E-

Glass/Polyester Composites”, Composites, Part B, Vol. 44, Issue 1, January 2013,

pp.313-320.

227. Rahman, M.M., Zainuddin, S., Hosur, M.V., Robertson, C.J., Kumar, A., Trovillion,

J., Jeelani, S., “Effect of NH2-MWCNTs on Crosslink Density of Epoxy Matrix and

ILSS Properties of E-glass/Epoxy Composites,” Composite Structures 95, January

2013, pp. 213-221.

228. Muhammad Rahman, Mahesh Hosur, Shaik Zainuddin, Uday Vaidya, Arefin Tauhid,

Ashok Kumar, Jonathan Trovillion and Shaik Jeelani, “Effects of amino-

functionalized MWCNTs on ballistic impact performance of E-glass/epoxy

composites using a spherical projectile,” International Journal of Impact Engineering,

75, 2013, pp. 108-118.

229. Victor A. Agubra, Peter S. Owour, Mahesh V. Hosur, “Influence of Nanoclay

Dispersion Methods on the Mechanical Behavior of E-Glass/Epoxy

Nanocomposites,” Nanomaterials, 3, 550-563, dio:10.3390/nano3030550, 2013.

230. M.B.A. Salam, M.V. Hosur, N. Jahan, M.M. Rahman, S. Jeelani, “Improvement in

Mechanical and Thermo-Mechanical Properties of Carbon fiber/Epoxy Composites

Using Carboxyl Functionalized Multi-Walled Carbon Nanotubes,” Journal of

Polymers and Polymer Composites, Vol. 21, No. 8, 2013, pp. 495-508.

231. N. Jahan, A. Narteh, M. Hosur, M. Rahman and S. Jeelani, “Effect of Carboxyl

Functionalized MWCNTs on the Cure Behavior of Epoxy Resin,” Open Journal of

Composite Materials, Vol. 3 No. 2A, 2013, pp. 40-47. doi:

10.4236/ojcm.2013.32A006.

232. M. Salam, M. Hosur, S. Zainuddin and S. Jeelani, “Improvement in Mechanical and

Thermo-Mechanical Properties of Epoxy Composite Using Two Different

Functionalized Multi-Walled Carbon Nanotubes,” Open Journal of Composite

Materials, Vol. 3 No. 2A, 2013, pp. 1-9. doi: 10.4236/ojcm.2013.32A001.

233. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion and

Shaik Jeelani, “Effect of Processing Techniques on the Performance of

Epoxy/MWCNT Nanocomposites,” Journal of Applied Polymer Science, Volume

127, Issue 6, 15 March 2013, pp. 4211–4224.

234. Muhammad E Hossain, Mohammad K Hossain, Mahesh Hosur and Shaik Jeelani,

“Low-Velocity Impact Behavior of CNF-Filled Glass Reinforced Polyester

Composites,” Published online before print March 25, 2013, doi:

10.1177/0021998313480194.

235. Williams, T, Hosur, M., Vaidya, U., and Jeelani, S., “Effect of Alkali Treatment on

Physical Properties of Bio-based Composites,” Polymers and Polymer Composites,

Vol. 21, No. 1, 2013, pp. 9-19.

236. Alfred Tcherbi-Narteh, Mahesh Hosur, Eldon Triggs and Shaik Jeelani, “Effects of

Surface Treatments of Montmorillonite Nanoclay on Cure Behavior of Diglycidyl

Ether of Bisphenol A (DGEBA) Epoxy Resin,” Journal of Nanoscience, vol. 2013,

Article ID 864141, 12 pages, 2013. doi:10.1155/2013/864141.

24

237. Boniface J. Tiimob, Vijaya K. Rangari, Shaik Jeelani, Effect of Reinforcement of

Sustainable -CaSiO3 Nanoparticles in Bio-based Epoxy Resin System. J.

Appl.Polym. Sci. 2014, 131, 40867. DOI : 10.1002/APP.40867.

238. Tarig A. Hassan, Vijaya K. Rangari and Shaik Jeelani, “Value added Bio-polymer

nanocomposites from waste eggshell based CaCO3 nanoparticles as fillers” ACS

Sustainable Chemistry & Engineering, 2014, 2 (4), 706 -717.

239. Vitus Apalangya, Vijaya Rangari, Boniface Tiimob, Shaik Jeelani and Temesgen

Samuel, “Development of antimicrobial water filtration hybrid material from bio

source calcium carbonate and silver nanoparticles” Applied surface science, 295,

108-114, 2014.

240. Myisha Roberson, Vijaya Rangari, Shaik Jeelani, Temesgen Samuel and Clayton

Yates “Synthesis and Characterization of Silver, Zinc oxide and Hybrid silver/zinc

oxide nanoparticles for antimicrobial applications” Nanolif, Published: 20 February

2014. 10.1142/S1793984414400030.2, 2, 2014.

241. Diane Render, Khalda Fadlalla, Vijaya Rangari, Temesgen Samuel and Shaik Jeelani,

Bio-based Calcium Carbonate (CaCO3) Nanoparticles for Drug Delivery

Applications, Int. J. Biomedical Nanoscience and Nanotechnology, 3, 3, 2014. 242. Alfred Tcherbi-Narteh, Mahesh Hosur and Shaik Jeelani, “Influence of Nanoclay on

the Durability of Woven Carbon/Epoxy Composites Subjected to Ultraviolet

Radiation,” Mechanics of Advanced Materials and Structures, Volume 21, Issue 3,

March 2014, pages 222-236.

243. Alfred Tcherbi-Narteh, Mahesh Hosur, Eldon Triggs, Peter Owuor and Shaik Jelaani,

“Viscoelastic and Thermal Properties of Full and Partially Cured DGEBA Epoxy

Resin Composites Modified with Montmorillonite Nanoclay Exposed to UV

Radiation,” Polymer Degradation and Stability, Vol. 101, 2014, pp. 81-91.

244. Mohammad K Hossain, Md. Mahmudur R Chowdhury, Kazi A Imran, Mahmud B

Salam, Mahesh Hosur and Shaik Jeelani, “Effect of Low Velocity Impact Responses

on Durability of Conventional and Nanophased CFRP Composites Exposed to

Seawater,” Polymer degradation and stability, Vol.99, 2014, pp.180-189.

245. S. Zainuddin, A. Fahim, T. Arefin, M. V. Hosur, M. M. Rahman, J.D. Tyson, S.

Jeelani, “Optimization of Mechanical and Thermo-Mechanical Properties of Epoxy

and E-Glass/Epoxy Composites Using NH2-MWCNTs, Acetone Solvent and

Combined Dispersion Methods”, Composite structures, 110 (2014) 39-50.

246. S. Zainuddin, T. Arefin, M. V. Hosur, J.D. Tyson, Ashok Kumar, J. Trovillion, S.

Jeelani, “Recovery and Improvement in low-velocity impact properties of E-

glass/epoxy composites through novel self-healing technique,” Composite structures,

Vol. 108, 2014, pp. 277-286.

247. Mohammad K. Hossian, Md. Mahmudur R. Chowdhury, Mahmud B. Salam,

Jonathan Malone, Mahesh Hosur, Shaik Jeelani, Nydeia Wright Bolden, “Improved

Thermo-Mechanical Properties of Carbon Fiber Reinforced Epoxy Composite using

Amino Functionalized XDCNT,” Journal of Applied Polymer Science, Volume 131,

Issue 17, 5 September 2014.

248. Hossain, M.K., Karim, M.R., Chowdhury, M.R., Imam, M.A., Hosur, M., Jeelani, S.,

Farag, R., “Comparative mechanical and thermal study of chemically treated and

untreated single sugarcane fiber bundle,” Industrial Crops and Products, vol. 58, 2014,

pp. 78-90.

25

249. Muhammad M. Rahman, Mahesh Hosur, Shaik Zainuddin, Nusrat Jahan, Everett B.

Miller-Smith, Shaik Jeelani, “Enhanced tensile performance of epoxy and E-

glass/epoxy composites by randomly-oriented amino-functionalized MWCNTs at

low contents,” Journal of Composite Materials, 0021998314525977, first published

on March 10, 2014.

250. Md. Reza-E-Rabby, Shaik Jeelani, Vijaya K. Rangari, “Structural Analysis of

Polyhedral Oligomeric Silsesquioxane (POSS) coated SiC Nanoparticles and Their

Applications in Thermoset Polymers”, J. Nanomaterials-2015.

251. B. Tiimob, V. Apalangya, T. Samuel, S. Jeelani, V. Rangari, Synthesis,

characterization and in vitro cytotoxicity assessment of eggshell-derived β-CaSiO3

nano biomaterial, British Journal of Applied Science and Technology, 8(2): 180-193,

2015, Article no. BJAST.2015.196

252. Akm Samsur Rahman, Vijaya Rangari, and Shaik Jeelani “Thermal and Mechanical

Properties of Woven Glass Fiber Reinforced Epoxy Composites with Carbon

Nanotubes Grown in-Situ”. The International Journal of Engineering and Science

(IJES) 4, 12, 54-61, 2015.

253. Md. Reza-E-Rabby, Shaik Jeelani, Vijaya K. Rangari Microwave processing of SiC

nanoparticles infused polymer composites: Comparison of thermal and mechanical

properties, J. Applied Polymer Science 132, 12, 2015.

254. Dereca Watkins, Md. Nuruddin, Mahesh Hosur, Alfred Tcherbi-Narteh and Shaik

Jeelani, “Extraction and Characterization of Lignin from Different Biomass

Resources,” Journal of Materials Research and Technology, 2015, 4(1), pp. 26-32,

http://dx.doi.org/10.1016/j.jmrt.2014.10.009.

255. Muhammad M. Rahman, Mahesh Hosur, Kuang-Ting Hsiao, Landon Wallace, Shaik

Jeelani, “Low velocity impact properties of carbon nanofibers integrated carbon

fiber/epoxy hybrid composites manufactured by OOA-VBO process,” Composite

Structures, Vol. 120, February 2015, pp. 32-40.

256. Md. Ekramul Islam, Muhammad M. Rahman, Mahesh Hosur, Shaik Jeelani,

“Thermal stability and kinetics analysis of epoxy composites modified with reactive

polyol diluent and multi-walled carbon nanotubes,” Journal of Applied Polymer

Science, Vol. 132, No. 9, March 5, 2015, DOI:10.1002/APP.41558.

257. Md. Ekramul Islam, Tanjheel H Mahdi, Mahesh V Hosur, Shaik Jeelani,

"Characterization of Carbon Fiber Reinforced Epoxy Composites Modified with

Nanoclay and Carbon Nanotubes," Procedia Engineering (Elsevier), 105, pp. 821-

828, 2015.

258. Md. Nuruddin, M., Hosur, M., Uddin, M. J., Baah, D. and Jeelani, S., “A novel

approach for extracting cellulose nanofibers from lignocellulosic biomass by ball

milling combined with chemical treatment,” 2015, J. Appl. Polym. Sci., 133, 42990,

doi: 10.1002/app.42990

259. M. E. Hossain, M. K. Hossain, M. V. Hosur, S. Jeelani, “Effect of Dispersion

Conditions on the Thermal and Mechanical Properties of Carbon Nanofiber-Polyester

Nanocomposites,” Journal of Engineering Materials and Technology, July 2015, Vol.

137/31005:1-9.

260. Md. Nuruddin, Raju Gupta, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani,

“Synergistic Effect of Graphene Nanoplatelets and Nanoclay on Epoxy Polymer

Nanocomposites,” Advanced Materials Research 2015, Vol. 1119 pp. 155-159,

doi/10.4028/www.scientific.net/AMR.1119.155.

26

261. Reaz Chowdhury, Mahesh Hosur, Md. Nuruddin, Alfred Tcherbi-Narteh, Ashok

Kumar, Veera Boddu, Jonathan Trovillion and Shaik Jeelani, “Self-Healing epoxy

composite- Preparation, characterization and healing performance,” Journal of

Materials Research and Technology, 2015, 4(1), pp. 33-43,

http://dx.doi.org/10.1016/j.jmrt.2014.10.016.

262. Diane Render, Temesgen Samuel, Howard King, Madan Vig, Shaik Jeelani,

Ramapuram Jayachandra Babu, and Vijaya Rangari “Biomaterial-Derived Calcium

Carbonate Nanoparticles for Enteric Drug Delivery” Journal of Nanomaterials, 2016,

Article ID 3170248, 8 pages, http://dx.doi.org/10.1155/2016/3170248.

263. Boniface Jabik Tiimob, Shaik Jeelani, Vijaya Kumar Rangari, Eggshell reinforced

biocomposite-an advanced ‘green’ alternative structural material, Journal of Applied

Polymer Science- 2016, 133, 43124.

264. Muhammad A. Imam, M.G. Gomes, Eesperidiana.A.B. Moura, Shaik Jeelani and

Vijay.K.Rangari, “Electron-beam irradiation effect on thermal and mechanical

properties of Nylon-6 nanocomposite fibers infused with Diamond and Diamond

coated Carbon Nano Tubes”, International Journal of Nanoscience, 15, 1-2, 1650004-

12, 2016.

265. Fahim Abdullah, Shaik Zainuddin, Shaik Shoeib, Mahesh Hosur, Dawen Li,

Mackenzie Matthews, Shaik Jeelani, “Properties of Polyhydroxy Butyrate

Polyvalerate Biopolymeric Nanocomposites Reinforced with Natural Halloysite

Nanotubes,” Journal of Material Science and Technology Research 3, 2016, 7-16,

10.15377/2410-4701.2016.03.01.2.

266. S. Zainuddin, F. Abdullah, S. Shoieb, M. Hosur, D. Li, C. Hicks, S. Jeelani,

“Morphological and Mechanical Behavior of Chemically Treated Jute-PHBV Bio-

Nanocomposites Reinforced With Silane Grafted Halloysite Nanotubes,” Journal of

Applied Polymer Science, Vol. 133 (39), 2016, DOI:10.1002/app.43994

267. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effects of Different

Montmorillonite Nanoclay Loading on Cure Behavior and Properties of Diglycidyl

Ether Bisphenol A Epoxy,” Journal of Nanomaterials, Volume 2016, Article ID

3840348, 12 pages, 2016, doi:10.1155/2016/3840348.

268. Shatori Meadows, Mahesh Hosur, Alfred Tcherbi-Narteh and Shaik Jeelani,

“Rheological and Cure Kinetics Studies of PET-based Unsaturated Polyester Resin,”

Journal of Advanced Materials, Feb. 2016, Vol. 1, pp. 84-99.

269. Manik C. Biswas, Shaik Jeelani, Vijaya Rangari, Influence of Biobased

Silica/Carbon hybrid nanoparticles on Thermal and Mechanical Properties of

Biodegradable Polymer films, Composites Communications., 4, 43-53, 2017.

270. Tiimob, Boniface; Mwinyelle, Gregory; Abdela, Woubit; Samuel, Temesgen;

Jeelani, Shaik; Rangari, Vijaya, “Nano-engineered eggshell-silver tailored co-

polyester polymer blend film with antimicrobial properties" Journal of Agricultural

and Food Chemistry, 65, 9, 1967-1976, 2017 (DOI: 10.1021/acs.jafc.7b00133).

271. Tanjheel Mahdi, Ekramul Islam, Mahesh Hosur, Shaik Jeelani, “Low Velocity Impact

Performance of CFRPs Modified with Carbon Nanotube, Nanoclay and Hybrid

Nanoparticles,” Journal of Reinforced Plastics, Vol. 36 (9), 2017, pp. 696-713.

272. Mahesh Hosur, Tanjheel H. Mahdi, Mohammad E. Islam, S. Jeelani, Mechanical and

“Viscoelastic Properties of Epoxy Nanocomposites Reinforced with Carbon

Nanotubes, Nanoclay and Binary Nanoparticles,” Journal of Reinforced Plastics, Vol.

36 (9), 2017, pp. 667-684.

27

273. Md. Nuruddin, Mahesh Hosur, Raju Gupta, Gaurav Hosur, Alfred Tcherbi-Narteh,

and Shaik Jeelani, “Cellulose Nanofibers-Graphene Nanoplatelets Hybrids

Nanofillers as High-Performance Multifunctional Reinforcements in Epoxy

Composites,” Polymer and Polymer Composites, Vol. 25, Issue 4, 2017, pp. 273-284.

274. Md. Nuruddin, Mahesh Hosur, Tanjheel Mahdi, Shaik Jeelani, “Flexural, Viscoelastic

and Thermal Properties of Epoxy Polymer Composites Modified with Cellulose

Nanofibers Extracted from Wheat Straw,” Sensors & Transducers, 210 (3), 2017, pp.

1-8.

275. Mohanad Idrees, Vijay Rangari, and Shaik Jeelani, 3D Printed Sustainable Biochar-

Recycled PET Composite, ACS Sustainable Chemistry and Engineering- 2018, 6

(11), pp 13940–13948.

276. Mohanad Idrees, Vijay Rangari, and Shaik Jeelani, Sustainable Packaging Waste-

Derived Activated Carbon for Carbon Dioxide Capture, Journal of CO2 Utilization

26, 380-387, 2018.

277. Vitus Apalangya Vijaya Rangari, Shaik Jeelani, Enock Dankyi, Abu Yaya, Samuel

Darko, Rapid microwave synthesis of needle-liked hydroxyapatite nanoparticles via

template directing ball-milled spindle-shaped eggshell particles, Ceramics

International 44 (2018) 7165–7171.

278. Boniface J. Tiimob, Vijaya K. Rangari, Gregory Mwinyelle, Woubit Abdela, Paul G.

Evans, Nicholas Abbott, Temesgen Samuel, Shaik Jeelani, Tough aliphatic-aromatic

copolyester and chicken egg white flexible biopolymer blend with bacteriostatic

effects, Food Packaging and Shelf Life 15 (2018) 9–16.

279. Mahesh Hosur, Tanjheel Mahdi, Shaik Jeelani, “Studies on the Performance of Multi-

Phased Carbon/Epoxy Composites with Nanoclay and Multi-Walled Carbon

Nanotubes,” Multidisciplinary Modeling, Experiments and Design, 1(4), 2018, pp.

255-268.

280. Shatori Meadow, Mahesh Hosur, Yusuf Celikbag, Shaik Jeelani, “Comparative

Analysis on the Epoxidation of Soybean Oil Using Formic and Acetic Acids,”

Polymers and Polymer Composites, Vol. 26, No. 4, 2018, pp. 289-297.

281. Vitus A. Apalangya, Vijaya K. Rangari, Boniface J. Tiimob, Shaik Jeelani, and

Temesgen Samuel, Eggshell Based Nano-Engineered Hydroxyapatite and

Poly(lactic) Acid Electrospun Fibers as Potential Tissue Scaffold, International

Journal of Biomaterials, Volume 2019, Article ID 6762575, 11 pages,

https://doi.org/10.1155/2019/6762575

282. Muhammad A Imam, Shaik Jeelani, and Vijaya K Rangari, Thermal Decomposition

and Mechanical Characterization of PLA and Potato Starch Blend Reinforced with

Bio-waste SiO2”, Journal of Composite Materials-53, 16, 2315-2334 -2019.

283. Manik C.Biswas, Boniface J.Tiimob, WoubitAbdela, ShaikJeelani, and Vijaya

K.Rangari “Nano Silica-Carbon-Silver ternary hybrid induced antimicrobial

composite films for food packaging applications”, Food Packaging and self-life, 19,

2019, 104-113.

284. Farooq Syed, Shaik Zainuddin, Andrea Mills, Mahesh Hosur, Shaik Jeelani,

“Crosslinking and Interfacial Behavior of Carboxylic Functionalized Carbon

nanotube Epon Nanocomposites: A Molecular Dynamics Simulation Approach,”

Spring Nature Applied Sciences, 2019, 1:1423, https://doi.org/10.1007/s42452-019-

1441-0, Published online 10/16/2019.

28

285. Farooq Syed, Shaik Zainuddin, Isaiah Wilson, Mohamed Elafandi, Shaik Jeelani,

“Quantitative Nanomechanical Property Mapping and in situ SPM Imaging of

Polyetherimide Nanocomposites,” Microsc. Microanal. 25 (2), 2019, 704-705,

doi:10.1017/S1431927619004252

286. Farooq Syed, Shaik Zainuddin, Mohamed Elafandi Isaiah Wilson, Haibin Ning, Shaik

Jeelani, “High-Speed Nanomechanical Property Mapping of Polyetherimide/Zinc

Titanate Nanocomposites,” Modern Concepts in Materials Science 1(5), 2019,

MCMS.MS.ID.000522.

287. Zaheeruddin Mohammed Shaik Jeelani, Vijaya Rangari, Effect of Low-Temperature

Plasma Treatment on Surface Modification of Polycaprolactone Pellets and Thermal

Properties of Extruded Filaments, JOM (2020). https://doi.org/10.1007/s11837-020-

04004-y.

Papers Presented at Technical Meetings 1. Jeelani, S. and Bailey, J. A. “Surface Integrity in Machining 18% Nickel

Marging Steel”, Presented at the 1974 Annual Conference of the Society of

Manufacturing Engineering, Dearborn, Michigan, 1974. SME Technical Paper No.

IQ74-185.

2. Bailey, J. A., Jeelani, S. and Becker, S. E. “Surface Integrity in Machining AISI

4130 Steel”, Presented at the ASME Winter Annual Meeting, Nov. 30- Dec. 5, 1975,

Houston, Texas. ASME paper No. 75-WA/Prod –33.

3. Jeelani, S. and Natarajan, R. “Residual Stresses in Machining Using Finite

Element Methods”. Presented at the ASME International Computer Engineering

Conference, August 7-11, 1983, Chicago, Illinois.

4. Jeelani, S. and Natarajan, R. “Determination of Residual Stresses in a Ring Due

to Machining”. Presented at the 1984 ASME International Computers in Engineering

Conference, August 12-17, 1984, Las Vegas, Nevada. Computers in Engineering,

1984 Vol. 2, pp. 773-777.

5. Jeelani, S. and Natarajan, R. “Residual Stress Distribution in 2024-T351

Aluminum Alloy” Presented at the 1985, Boston, Massachusetts. ASME

Conference on Computers in Engineering 1986, Vol. 2.2, pp. 59-63.

6. Jeelani, S. and Biswas, S. “Effect of Curing Conditions on the Strength of

Adhesively Bonded Joints”. Presented at the Annual meeting of the Adhesion

Society, February 1986, Charleston, South Carolina.

7. Jeelani, S. and Mazumdar, P. “Stain Localization in Fatigue and the Physical Basis

of the Coffin-Mason Relationship”. Presented at the Southeastern Conference on

Theoretical and Mechanics (SECTAM), April 1986, Columbia, South Carolina.

8. Jeelani, S. and Pilot, D. “A study of Cumulative Fatigue Damage in AISI 4130

Steel and Titanium 6 A1-4V Alloy”, Presented at the 1986 NASA- HBCU

Forum, Atlanta, Georgia, April 1986.

9. Jeelani, S. and Mazumdar. P. “Plastic Deformation – Its Role in Fatigue Crack

Propagation”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April

1986.

10. Jeelani, S. “Effect of Cutting Speed and Tool Rake Angle on Residual Stress

Distribution in Machining 2024-T351 Aluminum Alloy”. Presented at the 1986

NASA-HBCU Forum, Atlanta, Georgia, April 1986.

11. Jeelani, S. and Collins, M. “Effect of Electric Discharge Machining on the Fatigue

29

Life of Inconel 718 Allow”. Presented at the 1986 NASA-HBCU Forum, Atlanta,

Georgia, April 1986.

12. Jeelani, S. and Biswas, S. “Effect of Curing Conditions on the Strength of Adhesively

Bonded Joints”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April

1986.

13. Jeelani, S., Natarajan, R. and Hall, Marcus. “Design of a Sub-Sized Fatigue

Specimen”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April

1986.

14. Jeelani, S, Natarajan, R. and Reddy, R. G. “Computer Aided Design of a Sub- Sized

Fatigue Specimen”. Presented at the 1986 ASME International Computers in

Engineering Conference, Chicago, IL, July 20-24, 1986.


Life of Inconel 718 Allow”. Presented at the 1986 Fall Meeting of the

Metallurgical Society, October 5-9, 1986 Orlando, FL.

16. Jeelani, S. Natarajan, R. “Residual Stress Distribution in Machining AISI 4130

Steel Using Finite Element Techniques”, Presented at the 1986 ASME International

Computers in Engineering Conference, New York, August 1987.

17. Jeelani, S. “A Sub-Sized Fatigue Specimen”. Presented at the 1987 NASA- HBCU

Forum, Atlanta, Georgia, October 1987.

18. Jeelani, S. “An Investigation of Surface Damage in Fatigue Specimens”. Presented at

the 1987 NASA-HBCU Forum, Atlanta, Georgia, and October 1987.


Life of Inconel 718”. Presented at the 1987 NASA-HBCU Forum, Atlanta, GA,

October 1987.

20. Jeelani, S and Pilot, D. “Residual Stress Distribution in AISI 4130 Steel Due to

Machining”. Presented at the 1987 NASA-HBCU Forum, Atlanta, GA, and

October 1987.

21. Jeelani, S. and Biswas S. “A DSC Method to Monitor the Presence of Water

Absorbed by FM7 Epoxy Adhesive”. Presented at the 1987 NASA-HBCU Forum,

Atlanta, GA, October 1987.

22. Jeelani, S. and Jordan, K. “Study of the Integrity of Bond Between Carbon/Phenolic

and Graphite/Phenolic Composites”, Presented at the 1987 NASA-HBCU Forum,

Atlanta, GA, October 1987.

23. Jeelani, S. “Effect of Grinding on the Fatigue Life of Titanium Alloy (5A1-2.55Sn)

Under Dry and Wet Conditions”. Presented at the 1989 NASA- HBCU Forum,

Huntsville, AL, March 1989.

24. Mahfuz, H., Xue, D., Jeelani, S., Baker, D. and Johnson, S. “Characterization of

High Cycle Fatigue Behavior of Titanium 5A1-2.5Sn Alloy”, Presented in the 1991

SEM Spring Conference on Experimental Mechanics, June 10-13 at Milwaukee.

25. Mahfuz, H., Das, P., Baker, D., Jeelani, S. and Johnson, S. “Fatigue and Flexural

Response of Advanced Carbon/Carbon Composites at Room and Elevated

Temperatures, 16th Annual Conference OF The American Ceramic Society on

Composites Materials and Structures, January 12-15, 1992, Cocoa Beach, FL.,

Ceramics Engineering and Science Proceedings, Vol. 1, pp.449-468.

26. Baker, D., Mahfuz, H. and Jeelani, S “Characterization of Refractory Materials for

NASA Fastener Applications, 16th Annual Conference on Composites Materials and

Structures, The American Ceramic Society, January 12-15, 1992, Cocoa Beach, FL.

30

27. Mahfuz, H., Xue, D., Jeelani, S. and Baker, D. M. “Non-Linear Response of 2D

Carbon-Carbon Composites by Layered Shell Elements”, Developments in

Theoretical and Applied Mechanics, Vol. 16, pp. III.1.62-72, Proceedings of the 1992

Southeastern Conference on Theoretical and Applied Mechanics (SECTAM).

28. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Fatigue

Characterization of Advanced Carbon-Carbon Composites”, Proceedings of the 1992

SEM VII International Congress on Experimental Mechanics , Vol. 2, pp. 1368-

1373, 1992.

29. Mahfuz, H., Ingram, C. I. And Jeelani, S. “Compressive Response of

Thermoplastic Composites by Layered Shell Elements”, 1992 ASME Conference on

Computers in Engineering, Vol. 2, pp. 95-101.

30. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Experimental and Finite

Element Analysis of Advanced Carbon-Carbon (ACC-4) Composite under Tensile

Loading”, Proceedings of the International Conference on Advanced Composites,

Sydney, Australia, February, 1993, Vol. 1, pp. 1369-1395.

31. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Experimental and Finite

Element Analysis of Advanced Carbon-Carbon (ACC-4) Composite under Tensile

Loading”, Proceedings of the International Conference on Advanced Composites,

Sydney, Australia, February, 1993, Vol. 1, pp. 1369-1395.

32. Mahfuz, H., Das, P., Xue, D., Krishnagopalan, J. and Jeelani, S. “A combined

Experimental and Finite Study to Predict the Failure Mechanisms in SiC Coated

Carbon/Carbon Composites at Room and Elevated Temperatures Under Flexural

Loading”, Proceedings of the International Conference on Composite Materials

(ICCM/9), Madrid, Spain, July 12-16, 1993, Vol. 2, pp. 508-515.

33. Mahfuz, H., Das, P., Xue, D. and Jeelani, S. “Response of SiC Coated

Carbon/Carbon Composites under Flexural Loading- A Combined Experimental and

Finite Element Study”, 3rd International Symposium on Advanced Materials

(ISAM/3), Islamabad, Pakistan, September 20-25, 1993, Vol. 1. pp. 685-695.

34. Sulaiman, A., Yang, J., Jeelani, S. and Mahfuz, H. “Stress and Stability Analysis

of Thick Fiber Reinforced Laminated Composite Plates, Using Finite Element

Method”, 1993 ASME Conference on Computers in Engineering, Vol. 1, pp. 499-

506.

35. Mahfuz, H., Xue, D. and Jeelani, S. “Response of Advanced Carbon/Carbon

Composites under Tensile Loading”, 3rd Pacific Rim Forum on Composite

Materials, Honolulu, Hawaii, November 2-4, 1993.

36. Vaidya. U. K., Mahfuz, H. and Jeelani, S. “Vibration and Ultrasonic

Nondestructive Characterization on Non-Woven and Fabric Reinforced

Carbon/Carbon Composites”, 25th International SAMPE Conference, Philadelphia,

October 26-28, 1993, pp. 347-352.

37. Haque, A., Mahfuz, H., Yu, T. and Jeelani, S. “Effect of Processing Parameters on

Property Changes of Resin Transfer Molded Materials”, 25th International SAMPE

Conference, Philadelphia, October 26-28, 1993, Vol. 25, pp. 305-319.

38. Mahfuz, H. Zadoo, D., Wilks, F., Muneeruzzaman, M. and Jeelani, S. “Fracture and

Flexural Characterization of Monolithic SiC and SiCw/SiC Composites at Room and

Elevated Temperatures”, 18th Annual Conference, American Ceramic Society

(AcerS), Cocoa Beach, FL, January 9-14, 1994, Vol. 15. No. 4, pp. 219-232.


31

Carbon/Carbon Composite after First Carbonization”, 18th Annual Conference of

the American Ceramics Society, Cocoa Beach, FL, January 9-14, 1994, Vol. 15,

No. 4, pp. 591-598.

40. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Novel Hybrid Structural Carbon

Composites”, Proceedings of International Conference on Composites Engineering

(ICCE-1), pp. 316-317, New Orleans, July 23, 1994.

41. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Hybridization Concepts and NDE of

Carbon-Carbon Composites”, 26th International SAMPE Conference, Atlanta, GA,

September 1994. Vol. 26, pp. 483-490.

42. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Development of Nondestructive

Characterization of Non-Woven Carbon Composites”, Proceedings of INDA-

TEC’94 Conference, Vol. 1, pp. 31-37., Baltimore, September 22-24, 1994.


Carbon-Carbon Composites”, ASME Winter Annual Meeting, Chicago, IL.

November 6-11, 1994 NCA-Vol. 18, pp.103-109.

44. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Fabric Architectures – Processing – NDE

Relationships in the Development of Carbon-Carbon Composites”, ASME Winter

Annual Meeting, Chicago, IL, November 6-11, 1994.

45. Mahfuz, H., Haque, A., Grant, G. and Jeelani, S. “Fracture Behavior of SiCf/Si3N4

Composites”, First International Conference on Composites Engineering (ICCE/1),

August 28-31, 1994, Vol. 1, pp.538-539.

46. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Hybridization Concepts and NDE of

Carbon-Carbon Composites”, 26th International SAMPE Conference, September

1994, Atlanta, GA, Vol. 26, pp. 483-490.

47. Vaidya. U. K., Mahfuz. H. and Jeelani, S. “NDE of Innovative Hybrid Functional

Carbon Fiber Composite”, First International Conference on Composites

Engineering (ICCE/1), August 28-31, 1994, Vol. 1. pp. 538-539.

48. Mahfuz, H., Haque, A., Yu, D., Robinson, D. and Jeelani, S. “Reverse Fatigue of

Resin Transfer Model Composites”, International Conference on Design and

Manufacturing using Composites (ATMAM ’94), August 10-12, 1994, Vol. 1, pp.23-

32.

49. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K., Krishnagopalan, J. and Jeelani, S.

“Fatigue Damage and Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon

Composites’, International Conference on Design and Manufacturing using

Composites (ATMAM’94), August 10-12, 1994, Vol. 1, pp. 488-492.

50. Vaidya, U. K., Mahfuz, H., Krishnagopalan, J. and Jeelani, S. “Development and

Nondestructive Evaluation of Foam Core Composites”, ASME International

Congress of Mechanical Engineering and Exposition, NCA Vol. 18, DE-Vol. 80,

Materials for Vibration and Noise Control, PP. 103-108, 1994.

51. Mahfuz, H., Mian, A. K. M. A., Vaidya, U. K. and Jeelani, S. “Prediction of Fiber-

Matrix Interface Failure Due to Longitudinal Tensile Loading”, Materials Research

Society (MRS), Fall Meeting, November 27-December 2, 1994, Boston,

Massachusetts, MRS Symposium Proceedings, Vol. 365, pp. 229-236.

52. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Nondestructive

Evaluation/Characterization of Hybrid and Sandwich Carbon/Carbon Composites,

19th Annual Conference, American Ceramic Society (AcerS), Cocoa Beach, FL,

January 8-12, 1995, Vol. 16, No. 4, pp. 289-298.

32

53. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K. and Jeelani, S. “Fatigue Damage

and Residual Strength of Resin Transfer Molded Composites under Reverse Cyclic

Loading”, ASME Conference, Innovative Processing and Characterization of

Composite Materials, 1995, NCA-Vol. 20/ADM-Vol. 21 1, pp. 77-88.

54. Mahfuz. H., Vaidya U. K., Muneeruzzaman, Brown, T. and Jeelani, S. “Room and

High Temperature Fatigue Damage Evaluation of SiCf/Si3N4 Composites”, 19th

Annual Conference, American Ceramic Society, Cocoa Beach, FL, January 8-12,

1995, Vol. 16, No. 4, pp. 351-360.

55. Vaidya, U. K., Haque, A., Mahfuz, H. and Jeelani, S. “Effect of Short Fiber

Reinforcement Modification and Fabric Architecture on Ultrasonic and Acoustic

Emission Parameters of Carbon/Phenolic and Carbon Composites”, 4th Annual

Research Symposium, American Society of Nondestructive Testing (ASNT) March

21-23, 1995, pp. 244-246.

56. Mahfuz, H., Vaidya, U. K., Muneeruzzaman, M., Brown, T. and Jeelani, S. “Fatigue

Damage Analysis of SiCf/Si3N4 Composites Under Cyclic Loading at Elevated

Temperature, American Ceramic Society (AcerS), Annual Meeting and Exposition,

April 30-May 4, 1995, Cincinnati, OH.

57. Mahfuz. H., Saha, M., Vaidya, U. K. and Jeelani, S. “Impact Damage and Residual

Strength of Resin Infiltrated Toughened Graphite/Epoxy Panel”, 10th International

Conference on Composite Materials (ICCM-10), August 1995, Vancouver, Canada,

Vol. V, pp. 671-678.

58. Mahfuz, H., Saha, M., Vaidya, U. K., Biggs, R. and Jeelani, S. “Prediction of the

Dynamic Response of Toughened Graphite/Epoxy Composite Plates at Low

Velocity Impact-A Numerical Study”, 27th International SAMPE Technical

Conference, October 1995, Albuquerque, New Mexico, Vol. 27, pp. 830-842.

59. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K., Yu, D. and Jeelani, S. “Fatigue

Damage and Residual Strength Evaluation of Resin Transfer Molded (RTM)

Composites under Reversed Cyclic Loading”, International Mechanical Engineering

Congress and Exposition, 1995 Winter Annual Meeting of the ASME, NCA-

VOL.20/AMD-Vol. 211, November 12-17, 1995, San Francisco CA.

60. Gajiwala, H., Vaidya, U. K., Sodah, S. and Jeelani, S. “Novel Processing Techniques

for Low Porosity Carbon-Carbon Composites”, ASME International Congress of

Mechanical Engineering, CA_Vol. 20, pp. 241-248, 1995.

61. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Acoustic-Ultrasonic Characterization of

Carbon-Carbon Composites with Stretch Broken Fabric Architecture", 10th

International Conference on Composite Materials (ICCM-10), August 1995, Vol. V,

pp. 511-526.

62. Mahfuz, H., Mian A. K. M. A., Vaidya, U. K, Brown, T. and Jeelani, S. "Study

of the Interface Behavior of SiCf/Si3N4 Composites Using a 3-D Unit Cell

Model", 4th International Symposium n Advanced Materials (ISAM-4), Islamabad,

Pakistan, Sept. 17-21, 1995, Vol. 1, pp. 667-677.

63. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “ Hybridization Concepts in the

Development and Nondestructive Characterization of Carbon-Carbon Composites”,

Proceedings of the 27th International SAMPE Technical Conference, pp. 453-460,

Albuquerque, New Mexico, October 1995,

64. Vaidya, U. K., Wheeler, R., Mahfuz, H. and Jeelani, S. "Compression Behavior and

NDE of Stiffened Panels", 27th International SAMPE Technical Conference,

33

October 1995, Albuquerque, New Mexico, Vol. 27, pp. 711-721.

65. Mahfuz, H., Vaidya, U. K., Haque, A. and Jeelani, S. “ Experimental and Finite

Element Study of Static Compression and Reverse Fatigue Behavior of Thick

Section Composites”, 6th International Conference on Marine Applications of

Composite Materials (MACM’96), March 19-21, 1996, Cocoa Beach, FL

66. Haque, A., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Effect of Fiber Orientation

on HRS Response of Glass Fiber Reinforced Composites”, 28th International SAMPE

Conference, October 12-15, 1996, Seattle, WA.

67. Vaidya, U. K., Sodah, S. and Jeelani, S. “Toughening and Densification Concepts

Applied to Development of Carbon/Carbon Composites”, ASME International

Congress of Mechanical Engineering, NCA, Vol. 2, pp.34- 40, 1996.

68. Haque, A., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Thick Section

Composites under Static Compression and Cyclic Loading”, 14th World Conference

on Nondestructive Testing, New Delhi, December 6-13, 1996.

69. Vaidya, U. K., Fotedar, K., Mahfuz, H. and Jeelani, S. “Process Related Defects and

High Strain Rate Impact Damage Evaluation of Resin Transfer Molded Composites

Through a comprehensive NDE Approach”, 14th World Conference on

Nondestructive Testing, New Delhi, December 6-13, 1996.

70. Vaidya, U. K., Haque, A., Mahfuz, H. and Jeelani, S. “Sensor-Property-NDE

Relationship of Polymeric Composites Processed Through Resin Infusion”, Smart

Materials and MEMS, SPIE-96, Vol. 331, pp. 654-667, December 11-14, 1996,

Bangalore, India.

71. Mahfuz, H., Haque, A., Jeelani, S. and Vaidya, U. K. “Fatigue Behavior of

Carbon/Carbon (C/C) and Ceramic Matrix Composites (CMC)- Experimental and

Statistical Analyses”, Symposium on Processing, Characterization, and Modeling of

High Temperature Monolithic and Composite Materials, The 1997 Joint

ASME/ASCE/SES Summer Meeting, June 29-July 02,1997, Northwestern

University, Evanston, IL.

72. 72. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S. "Finite Element

Modeling of the High Strain Rate Behavior of S-2 Glass/Vinyl Ester Composites

Under Compressive Loading," 11th International Conference on Composite

Materials (ICCM-11), Melbourne, Australia, July 1997, Volume V, pp. 819-829.

73. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S. "High Strain Rate

Compression Behavior of Matrix Materials," 5th International Symposium on

Advanced Materials (ISAM - 5), Islamabad, Pakistan 1997, Proceedings: pp. 1-9.

74. 74. Mahfuz. H., Gama, B., Raines, B. and Jeelani, S. "High Strain Rate Behavior of

Woven Composites,” 4th International Conference on Composites Engineering

(ICCE - 4), Hawaii, July 6-11, 1997, Vol. 1, pp. 631-632.

75. Haque, A., Johnson, J., Vaidya, U. K., and Jeelani, S. “Static Compression and

Compression-Compression Fatigue of S2-Glass/Vinyl-Ester Composites," 4th

International Conference on Composites Engineering (ICCE-4), Hawaii, July 6-11,

1997, Vol. 1, pp. 408-409.

76. Vaidya, U. K., Krishnagopalan, J., Haque, A., Mahfuz, H. and Jeelani, S. "Non-

Destructive Characterization and Low Velocity Impact Response of Integral Armor

Components," 4th International Conference on Composites Engineering (ICCE - 4),

Hawaii, July 6-11, 1997, Vol. 1, pp. 1009-1010.

77. Mahfuz, H., Gama, B., Raines, R. and Jeelani, S. "High Strain Rate Behavior of the

34

Component Materials of an Integral Armor," 29th International SAMPE Technical

Conference, October 29 - Nov. 1, 1997, pp. 614-624.

78. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. K. and Jeelani, S. "Finite Element

Analysis of Composite Isogrid Cylinders," 29th International SAMPE Technical


79. Mahfuz, H., Elton, K., Das, P., Vaidya, U. K. and Jeelani, S. "High Frequency Fatigue

of Continuous Silicon Carbide Fiber Reinforced Silicon Nitride Matrix

Composites," 29th International SAMPE Technical Conference, October 29 - Nov.

1, 1997, pp. 128-141.

80. Vaidya, U. K., Kamath, M., Mahfuz, H. and Jeelani, S. "Manufacturing and Low

Velocity Impact Response of Innovative Sandwich Composites," 29th International

SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 713-724.

81. Vaidya, U. K., Abraham, A., Mahfuz, H. and Jeelani, S. "Manufacturing of

Composite Integral Armor Using Liquid Molding Process," 29th International

SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp, 523-531.

82. Haque, A., Ali, M., Mahfuz, H. Jeelani, S. "Rate Dependent Compressive Response

of S2-Glass/Vinylester Composites," 29th International SAMPE Technical


83. 83. Mahfuz, H., Lokesh, B., Das, P., Vaidya, U. K. and Jeelani, S. "Finite Element

Modeling and Photo elastic Analysis of an Integral Armor under Flexural Loading,"

NCA-Vol. 24, Proceedings of the ASME Noise Control and Acoustic Division,

ASME 97, pp. 235-246, 1997.

84. Mahfuz, H., Lokesh, B., Das, P., Vaidya, U. K. and Jeelani, S. “Experimental and

Finite Element Hybrid Stress Analysis of Thick Section S2-Glass Composites”, 19th

Southeastern Conference on Theoretical Applied Mechanics (SECTAM), May 3-5,

1997.Orlando, Florida.

85. Vaidya, U. K., Abraham, A., Hosur, M. V., Kumar, P., Haque, A., Mahfuz, H. and

Jeelani, S. “ Manufacturing of Thick Section Composites Using Low- Cost Liquid

Molding Processes”, 19th Southeastern Conference on Theoretical and Applied

Mechanics (SECTAM), May 3-5, 1997, Orlando, FL., pp. 139-150.

86. Vaidya, U. K., Mahfuz, H., Jeelani, S. and Motuku, M. “Low Velocity Impact

Response of Polymer Composites with Self-Healing Capability”, Alabama Materials

Research Conference, October 25-26, 1997.

87. Vaidya, U. K., Kamath, M., Mahfuz, H. and Jeelani, S. “Low Velocity Impact

Response of Unconventional Sandwich Composites”, Proceedings of the American

Society of Composites, pp. 562-571, October 6-8, 1997, Dearborn, MI.

88. Krishnagopalan, J., Vaidya, U. K., Abraham, A., Murthy, C. R. L., Fotdar, K.,

Mahfuz, H. and Jeelani, S. “ Manufacturing of Composite Integral Armor Using a

Cost Effective Resin Infusion Process”, American Institute of Chemical Engineers

Meeting, Chicago, Il, September 1997.

89. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. “ Fatigue Damage in

Glass/Vinyl Ester Thick Composites”, ASME International Congress of Mechanical

Engineering and Exposition, Proceedings of the ASME Noise Control and Acoustic

Division, NCA-Vol. 24, pp.247-258, 1997.

90. Haque, A., Vaidya, U. K., Ali, M., Fotedar. K., Mahfuz, H. and Jeelani, S. “Effect of

Fiber Orientation on High Strain Rate Behavior of Glass/Epoxy Composites”,

Engineering and Architecture Symposium, PVA&M, February 6-7, 1997, pp. 491-

35

498.

91. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. “Fatigue Damage in S2-

Glagg/Vinyl Ester Thick Composites”, NCA-Vol. 24, ASME, 1997, pp.247-257.

92. Vaidya, U., Mahfuz, H., Jeelani, S. and Motuku. M. “Low Velocity of Impact

Response of Polymer Composites with Self Healing Capability”, Alabama Materials

Research Conference, Huntsville, Alabama, October 25-26, 1997.

93. Gajiwala, H., Vaidya, U. K., Sodah, S. and Jeelani, S. “Hybridized Resin Matrix

Approach Applied to Development of Carbon/Carbon Composites”, 39th

AIAA/ASME/ASCE/ASC Conference, Long Beach, CA, April 1998.

94. Vaidya, U. K., Mohan, P., Kamath, M. and Jeelani, S. “Low Velocity Impact

Response of Sandwich Composites With Innovative Cores”, International

Conference of Composites Engineering (ICCE-5), Las Vegas, Nevada, July 1998.

95. Vaidya, U. K., Abraham, A., Hosur, M. V., Kumar, P., Haque, A., Mahfuz, H. and

Jeelani, S. "Manufacturing of Thick Section Composites Using Low Cost Liquid

Molding Processes," 19th SECTAM Conference on Theoretical and Applied

Mechanics, 1998, pp. 139-150.

96. Mahfuz, H., Lokesh, B., Vaidya, U. and Jeelani, S. “Experimental and Finite

Element Hybrid Stress Analysis of Thick Section S2-Glass Composites”,

Developments in Theoretical and Applied Mechanics, Vol. 9 (1998), pp. 117-128.

97. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. K., and Jeelani, S. "Response of

Composite Isogrid Cylinders under Axial Compression," 2nd International

Conference on Composite Science and Technology (ICCST/2), June 9-11, 1998, Vol.

1, pp. 325-331.

98. Vaidya, U. K., Mohan, P., Hosur, M. V. and Jeelani, S. “Low Velocity Impact

Response of Hybrid Sandwich Composites”, 30th International SAMPE Technical

Conference, Vol. 30, pp. 96-104, San Antonio, TX. October 20-24, 1998.

99. Vaidya, U. K., Kumar, P., Hosur, M. V., Kamath, M. V., Mahfuz, H. and Jeelani, S.

“Low Velocity and High Strain Rate Impact Response of Sandwich Composites”,

Proceedings of the 30th International SAMPE Conference, October 20-24, 1998, San

Antonio TX.

100. Mahfuz, H., Rahman, M., Haque, A., Fotedar, E., Vaidya, U. K. and Jeelani, S. “

Buckling Analysis of Composite Isogrid Cylinders Using Finite Element Method”,

International Conference on Advanced Composites, Hurghuda, Egypt, December

1998, pp. 673-682

101. Motuku, M., Janowski, G., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Low Velocity

Impact Response of Vinyl Ester 350 and C50 Neat Resins”, Proceedings of the

ASME, NAC-Vol. 25, pp.283-296, 1998.

102. Vaidya, U. K., Kumar, P, Hosur, M. V.,Kamath, N. V., Mahfuz, H. and Jeelani,

S. “ Low Velocity and High Strain Rate Impact of Pin Reinforced Foam Core

Sandwich Composites”, Proceedings of the Japan-US Conference on Composite

Materials, September 24-25, 1998, pp. 721-729, Baltimore, MD.

103. Hosur, M. V., Vaidya, U. K., Abraham, A. and Jeelani, S. "Effect of 3D

Reinforcement on the Low-Velocity Impact Response of S2-Glass/Vinyl Ester

Composite Laminates", ASME International Mechanical Engineering Congress and

Exposition, NCA-Vol. 25, pp.303-308, Anaheim, California, November 15-20, 1998.

104. Hosur, M. V., Vaidya, U. K., Jadhav, N., Abraham, A. and Jeelani, S. “ Static and

High Strain Rate Compression Testing of Thick Section S2 Glass/Vinyl Ester

36

Composites for Integral Armor Applications”, 1998 ASME International Mechanical

Engineering Congress and Exposition, Materials Division Publication, pp.293-300,

November 15-20, 1998, Anaheim, CA.

105. Hosur, M. V., Vaidya, U. K., Jadhav, N., Abraham, A and Jeelani, S. "Compression

Behaviour of Glass/Vinyl Ester Composites for Integral Armor Application"

IMECE-98, International Mechanical Engineering Congress and Exposition,

Anaheim, California, November 15-20, 1998, USA

106. Vaidya, U. K., Hosur, M. V., Kumar, P., Earl, D., Cloyd, M., Mahfuz, H., Haque,

A. and Jeelani, S. “ High Strain Rate Response of Sandwich Composites with

Integrated PARABEAM Core”, International Conference on Advanced Composites,

Hurghuda, Egypt, December 1998, pp. 215-226.

107. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. K. and Jeelani, S. "Response of

Fiber and Matrix in Composites under High Strain Rate Loading," Proceedings of

the SEM Annual Conference on Theoretical, experimental and Computational

Mechanics, June 7-9, 1999, Vol. 1, pp. 559-564.

108. Haque, A., Rahman, M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “ Tensile

Behavior of Woven Ceramic Matrix Composites at Room and Elevated

Temperatures: An Experimental and Numerical Study”, Key Engineering Materials,

Vols. 164-165, 1999, pp. 341-344, CSI Series- Publication of the Ceramic Society

of Japan, Vol. 3.

109. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. K. and Jeelani, S. "S-N

Characterization and Cyclic Life Prediction of Thick-Section Composites under

Flexural Loading," Proceedings of the SEM Annual Conference on Theoretical,

Experimental and Computational Mechanics, June 7-9, 1999, Vol. 1, pp. 630- 635.

110. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. K. and Jeelani, S. "Fatigue Life

Prediction of Thick-Section Woven Composites Under Flexural Loading," 6th

International Conference on Composites Engineering (ICCE - 6), June 27 - July 3,

1999, Orlando, Florida, Vol. 1, pp. 537-538.

111. Hosur, M. V., Vaidya, U. K., Gillespie, J. and Jeelani, S. "Ultrasonic Evaluation of

Low-Velocity and Ballistic Impact Damage in S2-Glass Impact damage in S2-

Glass/Vinyl Ester laminates", 26th Annual Review of Progress in Quantitative

Nondestructive Evaluation, July 25-30, 1999 Montreal, Quebec, Canada

112. Vaidya, U. K., Jadhav, N., Hosur, M. V., Mahfuz, H. and Jeelani, S. "Parametric

Dielectric Sensing Studies in Vacuum Assisted Resin Transfer Molding," 6th

International Conference on Composites Engineering (ICCE-6), June 27-July 3,

1999, Orlando, Florida, Vol. 1, pp. 857-858.

113. Vaidya, U. K., Jadhav, N., Hosur, M. V., Haque, A. and Jeelani, S. “Influence of

Specimen Thickness on the High Strain Rate Impact Response of VARTM Woven

S2-Glass/Vinyl Ester Composites”, 6th International Conference on Composites

Engineering (ICCE-6), June 27-July 3, 1999, Orlando, FL.

114. Vaidya, U. K., Abraham, A, Hosur, M. V. and Jeelani, S. “Manufacturing and Impact

Response of S2-Glass/Epoxy Composites Produced by Low-Cost Vacuum Assisted

RTM and Resin Liquid Infiltration”, 1st International SAMPE Automotive

Conference, September 27-29, 1999, Detroit, MI.

115. Vaidya, U. K., Jadhav, N., Hosur, M. V., Haque, A., Mahfuz, H. and Jeelani, S.

“High Strain Rate Impact Response of Infusible Neat Resins and VARTM S2-Glass

Reinforced Fabric Composite”, 1999 SAMPE Technical Conference: Advanced

37

Materials and Processes Preparing for the New Millennium, Vol. 31, pp.89-100,

Covina, CA.

116. Hosur, M. V., Vaidya, U. K., Jeelani, S. Jones, S., Eduljee, R. and Gillespie, J.

“Activity Based Cost Modeling of Liquid Molding Processing Techniques for Thick

Section Composites", American Society for Composites, 14th Technical Conference,

September 27-29, 1999, Dayton, OH, pp. 968-977.

117. Mahfuz, H., Mamun, W., Hisham, M., Vaidya, U. K., Haque, A. and Jeelani, S.

"High Strain Rate Response of resin Infusion Molded Sandwich

Composites,"1999 ASME International Mechanical Engineering Congress and

Exposition, Nashville, TN, AMD-Vol. 235, Thick Composites for Load Bearing

Structures, pp. 105-112.

118. Haque, A., Rahman, M., Mahfuz, H., Vaidya, U. K. and Jeelani, S “ Durability and

Damage Development in Woven Ceramic Matrix Composites Under Tensile and

Fatigue Loading at Room and Elevated Temperatures”, MD-Vol. 86, Durability and

Damage Tolerance of Composite Materials and Structures, 1999 ASME

International Mechanical Engineering Congress and Exposition, Nashville, TN.

119. Vaidya, U. K., Hosur, M. V., Kumar, P., Mahfuz, H., Haque, A. and Jeelani, S.

“Impact Damage Resistance of Innovative Functional Sandwich Composites”,

Symposium on Recent Developments in the Study of Impacts on Composite

Materials, ASME 1999 Mechanics and Materials Conference, Blacksburg VA, June

27-30, 1999.

120. Vaidya, U. K., Hosur, M. V., Haque, A., Mahfuz, H. and Jeelani, S. “Impact

Response of Innovative Sandwich Composites in Low, Intermediate Velocity and

High Strain Rate Scenarios”, International Conference on Composite Materials

(ICCM-12), July 6-10, 1999, Paris, France.

121. Vaidya, U. K., Jadhav, N., Hosur, M. V., Mahfuz, H. and Jeelani, S. “High Strain

Rate Response of Resins Used in Vacuum Assisted Resin Transfer Molding”,

Proceedings of the International Conference on Composite Materials (ICCM2),

Paris, France, July 5-9, 1999.

122. Vaidya, U. K., Jadhav, N. C., Hosur, M. V., Mahfuz, H., Mohammad, H. and Jeelani,

S. “Parametric Dielectric Sensing Studies in Vaccum Assisted Resin Transfer

Molding”, Proceedings of the International Conference on Composite Materials

(ICCM-12), Paris, France, July 5-9, 1999.

123. Vaidya, U. K., Mohan, P. K., Hosur, M. V., Mahfuz, H., Haque, A. and Jeelani,

S. “ Impact Response of Innovative Sandwich Composites in Low, Intermediate

Velocity and High Strain Rate Scenarios”, Proceedings of the International

Conference on Composite Materials (ICCM-12), Paris, France, July 5-9, 1999.

124. Mahfuz, H., Zaman, K., Hisham, M., Vaidya, U. K., Haque, A. and Jeelani, S.

"Fatigue Modulus Concept and Life Prediction of Thick-Section S2-

Glass/Vinylester Composites under Flexural Loading," ASME 1999, MD- Vol.

86, AMD-Vol. 232, Durability and Damage Tolerance of Composite Materials and

Structures, pp. 101-106. ‘

125. Hosur, M. V., Vaidya, U. K., Abraham, A., Basappa, G. and Jeelani, S. "Studies on

the influence of through-thickness stitching on low-velocity and high strain response

of S2-Glass/Vinyl Ester Composites", ASME International Mechanical Engineering

Congress and Exposition, AM-9A,Nashville, Tennessee, November, 1999.

126. Hosur, M. V., Vaidya, U. K., Haque, A., Kulkarni, M., Kulkarni, R. and Jeelani, S,

38

"Evaluation of Ballistic Impact damage of Fiber Reinforced Plastic Laminates

Bonded by Polycarbonate Face sheet" ASME International Mechanical Engineering

Congress and Exposition, pp. 301-312, Nashville, Tennessee, November, 1999.

127. Mahfuz, H., Pal, A., Rahman, M. and Jeelani, S. "Failure Analysis of Thick

Composite Rings Under Diametric Compression," 12th International Conference on

Composite Materials (ICCM-12), Palais Des Congress, Paris, July 6-10, 1999.

128. Mahfuz, H., Rahman, M., Vaidya, U. K., Haque, A. and Jeelani, S. "Effect of Rib

Geometry on the Buckling Behavior of Composite Isogrid Cylinders," 12th

International Conference on Composite Materials (ICCM-12), Palais Des Congress,

Paris, July 5-9, 1999.

129. Mahfuz, H., Zhu, Y., Haque, A. and Jeelani, S. "Response of Integral Armor under

High Velocity Impact - An Experimental and Finite Element Study," 12th

International Conference on Composite Materials (ICCM-12), Palais Des Congress,

Paris, July 6-10, 1999.

130. Vaidya, U. K., Hosur, M. V., Earl, D., Cloyd, J. M., Rodgers, R. M. and Jeelani, S.

“Impact Response of Integrated Hollow Core Sandwich Composite Panels”, 14th

Technical Conference of American Society for Composites, September 27-29,

1999, Dayton, Ohio, PP. 404-413.

131. Hosur, M. V., Vaidya, U. K., Haque, A., Kulkarni, M, Kulkarni, R. and Jeelani,

S. “Evaluation of Ballistic Impact Damage of Fiber Reinforced Plastic Laminates

Bonded by Polycarbonate Face Sheets”, 1999 ASME Mechanical Engineering

Congress and Exposition, Noise and Acoustic Division Publication NCA-Vol. 26,

pp.301-312. Fairfield, NJ.

132. Vaidya, U. K., Kamath, M. V., Hosur, M. V., Haque, A. and Jeelani, S. “Low-

Velocity and Compression After Impact Response of Pin-Reinforced Sandwich

Composites”, 1999 ASME International Mechanical Engineering Congress and

Exposition, Materials Division Publication, MD- Vol. 86, pp 89-100, Fairfield, NJ.

Pp. 1-10.

133. Hosur, M.V., Vaidya, U. K., Abraham, A., Bassappa, G. and Jeelani, S. “Studies on

the Influence of Through the Thickness Stitching on Low Velocity and High Strain

Rate Response of S2-Glass/Vinyl Ester Composites”, 1999 ASME International

Mechanical Engineering Congress and Exposition, Nashville, TN, November 1999.

134. Hosur, M. V., Vaidya, U. K., Abraham, A. and Jeelani, S. “Studies on the

Influence of 3D Reinforcement of S2-Glass/Vinyl Ester Composites Under Low-

Velocity Impact Fatigue Loading”, 20th Southeastern Conference on Theoretical and

Applied Mechanics, (SECTAM-XX), Callaway Gardens, Pine Mountain, GA, USA,

April 16-18, 2000.

135. Hosur, M. V., Vaidya, U. K., Alexander, J. and Jeelani, S. “High Strain Rate

Response of Affordable Woven Graphite/Epoxy Composite Laminates,” 7th

International Conference on Composites Engineering, ICCE/7, Denver, CO, USA

July 2-8, 2000

136. Vaidya, U. K., Rogers, R., Hosur, M. V., Mahfuz, H. and Jeelani, S.” Influence of

Face Sheet Thickness and Core Density on the Impact Response of Foam Core

Sandwich Composites”, 20th Southeastern Conference on Theoretical and Applied

Mechanics (SECTAM-XX), Calloway Gardens, GA, April 16-18, 2000.

137. Hosur, M. V., Vaidya, U. K., Abraham, A., Caroll, A. and Jeelani, S. "Comparison

of Low-Velocity Impact Response of S2-Glass/SC-15 Epoxy Composites

39

Manufactured by Low-Cost VARIM And RIT Techniques", 15th annual Conference

of American Society of Composites, College Station, TX, USA, Sept. 25-27, 2000.

138. Motuku, M., Vaidya, U. k., Janowski, G. M., Basappa, G. and Jeelani, S. “Effect of

Impact Velocity and Impactor Mass on the Low Velocity Impact Response of

Liquid Molded VE 350 Resin and Fiber Reinforced Plaques”, ASME/IMECE’2000,

Symposium on CAE and Related Innovations for Polymer Processing, MD-Vol 90,

pp. 117-138.

139. Motuku, M., Rogers, R., Jeelani, S. and Vaidya, U. K. “Effect of Foam Core Density

and Face Sheet Thickness on the Low Velocity Impact Response of Foam Core

Sandwich Composites”, ASME/IMECE’2000, Symposium on Vibration and Noise

Control With Multi-Functional Materials, NCA-Vol.27. Pp.435-446.

140. Mahfuz, H, Zhu, Y., Mamun, W., Haque, A. and Jeelani, S. "Failure Analysis of

Hybrid Armor Under High Velocity Impact," ASME 2000, AMD-Vol. 243,

Dynamic Failure in Composite Materials and Structures, pp. 115-127.

141. Mahfuz, H., Islam, S., Carlsson, L., Atkins, M. and Jeelani, S. "Effect of Implanted

Delamination and Core Density on the Buckling Behavior of Sandwich Composites,"

ASME 2000, AMD-Vol. 245, Mechanics of Sandwich Structures, pp. 143-150.

142. Mahfuz, H., Mamun, W. and Jeelani, S. "Effect of Core Density and Implanted

Delamination in the High Strain Rate Response of Foam Core Sandwich

Composites," Sandwich Construction 5, Volume 2, pp. 597-606, 2000.

143. Mahfuz, H., Mamun, W., Vaidya, U. K., Haque, A. and Jeelani, S. “Response of

Foam-Core Sandwich Composites at High strain Rate," Developments in Theoretical

and Applied Mechanics," Vol. 20, pp. 1-7, 2000.

144. Hosur, M. V., Alexander, J, Jeelani, S. and Vaidya, U. K. “High Strain Rate

Compression Response of Carbon/Epoxy Laminate Composites,” ASME

International Mechanical Engineering Congress and Exposition, Orlando, FL,

November, 2000

145. Hosur, M. V., Karim, M. R., and Jeelani, S. “Influence of Stitching On The Low-

Velocity Impact Response Of Woven S2-Glass/SC-15 Epoxy Composites” ASME

International Mechanical Engineering Congress and Exposition, Orlando, FL,

November 2000

146. Hosur, M. V., Alexander, J., Adya, M., Vaidya, U. K. and Jeelani, S. Impact

Response of Affordable Graphite/Epoxy Woven Fabric Composites", 42nd

AIAA/ASME/ASCE/ASC Structures, Structural Dynamics and Materials

Conference, Seattle, WA, 16-19 April, 2001

147. Hosur, M. V., Adya, M., Vaidya, U. K., Mayer, A. and Jeelani, S “Characterization

of Affordable stitched Plain Weave Carbon/Epoxy Composites Under Impact

Loading”, Thirteenth International Conference on Composite Materials ( ICCM-13),

June 25-29, 2001, Beijing China

148. Motuku, M., Vaidya, U. K., Rogers, R. and Jeelani, S. “Static Compression and

High Strain Rate Impact Response of Foam Core Sandwich Composites”,

International Conference on Composite Materials (ICCM-13), Paper ID-1569,

Beijing, China, June 25-29, 2001.

149. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S. “Off-Axis High Strain

Compression Response of Carbon/Epoxy Laminates”, Proceedings of the 16th

Annual Technical Conference of the American Society for Composites, Blacksburg,

VA, September 9-12, 2001

40

150. Hosur, M. V., Adya, U., Vaidya, U. K. and Jeelani, S. “Impact Resistance of Stitched

Affordable Woven Carbon/Epoxy Composites”, ASME International Mechanical

Engineering Congress and Exposition, New York, NY, November 2001.

151. Mahfuz, H., Mamun, W. and Jeelani, S. "Recent Advances in Understanding the

Response of Composite Materials at Higher Rates of Strain," Keynote Paper, 4th

International Conference on Mechanical Engineering (ICME 2001), Vol. 1., pp.

57-65.

152. Mahfuz, H., Muneeruzzaman, M., Zaman, K., Kulkarni, N. and Jeelani, S. “Response

of Advanced Composites under Cyclic Loading; Recent Advances in Numerical and

Experimental Approaches," Keynote Paper, BSME-ASME International Conference

on Thermal Engineering, 2001, Vol. 1. pp. 120-132.

153. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. “Flexural Fatigue of PVC

Foams”, 2001 ASME International Mechanical Engineering Congress, AMD-Vol.

248, pp. 39-49.

154. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. “High Strain Rate Response of

PVC Foams”, 2001 ASME International Mechanical Engineering Congress, AMD-

Vol.247, pp.93-101

155. Hosur, M. V., Karim, M. R. and Jeelani, S. “Studies on Stitched Woven S2

Glass/Epoxy Laminates Under Low and Ballistic Impact Loading”, Southeastern

Conference on Theoretical and Applied Mechanics, (SECTAM XXI), May 19-21,

2002, Orlando, FL

156. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S “Characterization Of

Affordable Satin Weave Carbon/Epoxy Laminate Composites Under Dynamic

Compression Loading”, Southeastern Conference on Theoretical and Applied

Mechanics (SECTAM XXI), May 19-21, 2002, Orlando, FL

157. Hossain, M. K., Haque, A., Mahfuz, H. and Jeelani, S., “Effects of Moisture and

Temperature on High Strain Rate Behavior of S2-Glass/Vinyl Ester Woven

Composite,” International Mechanical Engineering Congress and Exposition

(ME2001). November 11-16, 2001, New York, New York.

158. Hosur, M. V., Adya, M., Vaidya. U. K. and Jeelani, S., “Response of Stitched Woven

Carbon/Epoxy Composites under High Strain Rate Compression Loading,” SAMPE

Technical Conference, Nov. 4-7, (2002), Baltimore, Maryland.

159. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F. and Jeelani, S., “Innovative

Manufacturing and Stability Analysis of Composite Skin-Stringer Assembly,”

ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002).

160. Mahfuz, H., Chakravarty, U., Saha, M. and Jeelani, S., "Microstructure, Density and

Strain Rate Effects on Sandwich Core Materials," ASME Winter Annual Meeting,

New Orleans, Louisiana, November (2002).

161. Mahfuz, H., Hasan, ABM, Saha, M. and Jeelani, S., "Failure Prediction of Flip

Chip Packages using Finite Element Technique," ASME Winter Annual Meeting,

New Orleans, Louisiana, November (2002), conference.

162. Hosur, M., Myers, D., Vaidya, U. K., and Jeelani, S., "Studies on the Repair of

Ballistic Impact Damaged S2-Glass/Epoxy Laminates,” ASME International

Mechanical Engineering Congress and Exposition, New Orleans, LA, November

(2002).

163. Islam, M., Mahfuz, H., Motuku, M., Saha, M., and Jeelani, S, "Manufacturing and

Analysis of 3-D Woven Sandwich Composites under Compressive Loading with

41

Acoustic Emission Monitoring," ASME Winter Annual Meeting, New Orleans,

Louisiana, November (2002).

164. Hosur, M. V., Waliul Islam, S. M, Jeelani, S., Vaidya, U. K. and Dutta, P. "High

Strain Compression Characterization of Graphite/Epoxy Composites at Room and

Elevated Temperatures," ASME International Mechanical Engineering Congress and

Exposition, New Orleans, LA, November (2002).

165. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "On and Off-

Axis High Strain Rate Compression Characterization of Affordable Woven

Carbon/Epoxy Composites,” 17th Annual Technical Conference of the American

Society for Composites, Purdue, IL, October 20-23, (2002).

166. Kanny, K., Mahfuz, H., Thomas, T., and Jeelani, S.," Static and Dynamic

Characterization of Polymer Foams under Shear Loads," CD Proc. American Society

for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October

(2002), Paper No. 2013.

167. Thomas, T., Mahfuz, H., Kanny, K., Jeelani, S., "High Strain Compression of

Cellular Foam Core Sandwich Composites at Sub-ambient Temperatures,” CD

Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette,

Indiana, 21-23 October (2002), Paper No. 2012.

168. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F., Jeelani, S., and Thomas, M .M.

"Composite Skin-Stringer Assembly: Innovative Manufacturing and Stability

Analysis." CD Proc. American Society for Composites 17th Annual Tech. Conf.,

West Lafayette, Indiana, 21-23 October (2002), Paper No.183.

169. Hosur, M. V., Karim, M. R. and Jeelani, S. "Studies on Stitched Woven S2

Glass/Epoxy Laminates Under Low and Ballistic Impact Loading,” Southeastern

Conference on Theoretical and Applied Mechanics, (SECTAM XXI), May 19-21,

(2002), Orlando, FL.

170. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S "Characterization of

Affordable Satin Weave Carbon/Epoxy Laminate Composites Under Dynamic

Compression Loading,” Southeastern Conference on Theoretical and Applied

Mechanics (SECTAM XXI), May 19-21, (2002), Orlando, FL.

171. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. "Effects of Loading Frequency

on the Fatigue Behavior of Sandwich Composites,” Developments in Theoretical and

Applied Mechanics, Vol. 11(2002), pp. 285-294.

172. Kulkarni, N., Mahfuz, H., Carlsson, L. and Jeelani, S. "Flexural Fatigue

Characterization of PVC Foam Core Sandwich Composites,” Developments in

Theoretical and Applied Mechanics, Vol. 11(2002), pp.295-304.

173. Mahfuz, H., Ashfaq, A., Rangari, V., and Jeelani, S., "Characterization of Carbon

Nanotube Reinforced Filaments and their Composites," 2003 ASME International

Mechanical Engineering Congress and Exposition, Washington, DC, November 15-

21 (2003).

174. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Dynamic Punch

Shear Characterization of Woven Graphite/Epoxy Laminates,” ASME International

Mechanical Engineering Congress and Exposition, Washington, D. C., November

15-21 (2003).

175. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Evaluation of

Dynamic Punch Shear Properties of Graphite/Epoxy Cross-Ply Laminates,” CD

Proc. American Society for Composites, 18th Annual Tech. Conf., Gainesville,

42

Florida, October 19-22 (2003).

176. Mahfuz, H., Islam, M., Rangari, V. and Jeelani, S., "Processing Synthesis and

Flexural Characterization of Nanophased Polyurethane Foams," American Society

for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003),

Paper 220.

177. Mahfuz, H., Saha, M., Chakravarty, U. and Jeelani, S., "Energy Absorption at

Various Strain Rates by Sandwich Core Materials - Analytical and Experimental

Investigation," American Society for Composites 18th Annual Tech. Conf.,

Gainesville, Florida, October 19-22 (2003), Paper 227.

178. Mahfuz, H., Ashfaq, A., Rangari, V., Jasiuk, I. and Jeelani, S., "Effects of Micron

and Nanosized SiC Particles on the Mechanical Properties of Epoxy

Nanocomposites," American Society for Composites 18th Annual Tech. Conf.,


179. Gorenstein, N. Friedman, A., Mahfuz, H., Ashfaq, A., Rangari, V. and Jeelani, S.,

“Synthesis, Processing, and Mechanical Characterization of Epoxy-Protein

Nanocomposites," American Society for Composites, 18th Annual Tech. Conf.,


180. Saha, M., Mahfuz, H., Joarder, C. and Jeelani, S., "Finite Element Analysis of

Integral Sandwich Tee Joints under Tension," 10th International Conference on

Composites/Nano Engineering, New Orleans, Louisiana, July (2003).

181. Mahfuz, H., Adnan, A., Rangari, V. and Jeelani, S., "Carbon Nano-whisker

Reinforced Composites: Manufacturing and Characterization," 2003 SEM Annual

Conference on Experimental and Applied Mechanics, Charlotte, NC, preprint 199,

June 2-4, (2003).

182. Hosur, M. V., Vaidya, U. K., Ulen, C., Mayer, A. and Jeelani, S. "Ballistic Impact

Response of Woven Carbon/Epoxy Composites,” 48th International SAMPE

Symposium, May 11-13(2003), Long Beach CA.

183. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S.," Shear Fatigue Behavior of

PVC Foams" 6th International Conference on Sandwich Constructions (ICSC6), Fort

Lauderdale, Florida, Vol. 1, April (2003), pp. 513-521.

184. Mahfuz, H., Islam, S. and Jeelani S., "Flexural Response of Sandwich Composites

with Nanophased Cores," 6th International Conference on Sandwich Constructions

(ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 213-226.

185. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S., "Dynamic Compression of

Foam Core Sandwich Composites," 6th International Conference on Sandwich

Constructions (ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 410-417.

186. Hosur, M. V., Adya, M, Dutta, P. and Jeelani, S. "High Strain Rate Response of

Woven Graphite/Epoxy Composites at Elevated Temperatures,” 44th

AIAA/ASME/ASCE/ASC Structures, Structural Dynamics and Materials

Conference, Norfolk, VA, April (2003).

187. Salekeen, S., Rahman, M.M., Mahfuz, H., and Jeelani, S., "Long-term Creep and

Creep Rupture Behavior of Woven Ceramic Matrix Composites at Elevated

Temperatures," 2004 ASME International Mechanical Engineering Congress,

Anaheim, California, November 13-19, (2004).

188. Hosur, M. V., John, M. K., Menon, A., Rangari, V. and Jeelani, S. "Studies on the

Microwave Curing and Characterization of SC-15 Epoxy Reinforced with ZnO

Nanoparticles,” 19th Annual Technical Conference of the American Society for

43

Composites, October 17-20(2004), Atlanta, GA.

189. Baseer, M.A. Mahfuz, H., Rangari, V. J., Zhou, Y., and Jeelani, S." Evaluation of

Thermal and Mechanical Properties of Nanophased Carbon Prepregs," American

Society for Composites 19th Annual Tech. Conf., Atlanta, Georgia, October 17-20

(2004), Paper NT-22.

190. Hosur, M. V., Abdullah, M. and Jeelani, S. "Fabrication and Low Velocity Impact

Response of Innovative Foam Filled 3-D Integrated Core Sandwich Composites, 11th

U. S. Japan Conference on Composite Materials, September 9-11 (2004), Yonezawa,

Japan.

191. John, K. M., Hosur, M. V., Rangari, V. and Jeelani, S. "On the Processability of

Nanophased Composites using Microwave,” 22 Southeastern Conference on

Theoretical and Applied Mechanics, SECTAM XXII, August 17(2004), Tuskegee,

Alabama.

192. Hasan M., Mahfuz, H., Rangari, V. and Jeelani, S., "Thermal and Mechanical

Characterization of Nylon-6 Filaments Infused with Nanoparticles, Southeastern

Conference on Theoretical and Applied SECTAM XXII, August 15-17(2004),

Tuskegee, AL.

193. Hosur, M. V., Abdullah, M. and Jeelani, S. "Response of Hollow and Foam Filled

Integrated Core Sandwich Composites under Low Velocity Impact Loading,”

International Conference on Advances in Structural Integrity, July 14-17 (2004),

Bangalore, India.

194. Hosur, M.V., Islam, W., Vaidya, U. K. and Jeelani, S. "Dynamic Response of Satin

Weave Graphite Epoxy Composite under Punch Shear Loading at Room and

Elevated Temperatures,” International Conference on Advances in Structural

Integrity, July 14-17(2004), Bangalore, India.

195. Mahfuz, H., Uddin, M., Rangari, V., and Jeelani, S., “High Strain Rate Response of

Sandwich Composites with Nanophased Cores," 2004 SEM X International

Congress on Experimental and Applied Mechanics, Costa Mesa, California, June 7-

10(2004).

196. Hosur, M. V., Islam, W., Vaidya, U. K. and Jeelani, S. "Dynamic Punch Shear

Characterization of Twill Weave Graphite/Epoxy Composites,” SAMPE 2004, Long

Beach CA.

197. Uddin, M., Saha, M., Mahfuz, H., Rangari, V. and Jeelani, S., "Strain Rate effects

on Nanophased Polyurethane Foams," SAMPE 2004, May 16-20 (2004), Long

Beach, CA.

198. Salekeen, S., Nana, J., Mahfuz, H., and Jeelani, S., "Thermal Shock Behavior of

Nicalon Fiber SiCN Ceramic Matrix Composites," SAMPE 2004, May 16-20

(2004), Long Beach, CA.

199. Mahfuz, H., Baseer, M., Rangari, V., and Jeelani, S., "Fabrication, Characterization

and Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE

May 16-20 (2004), Long Beach, CA.

200. Hosur, M. V., Abdullah, M. and Jeelani, S. "Low Velocity Impact Characterization of

Hollow Integrated Core Sandwich Composites,” SAMPE 2004, May 16-20, (2004),

Long Beach, CA

201. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Enhancement of Thermal and

Mechanical Properties of Woven Carbon/Epoxy Composites through Nanoclay,"

International Conference on Computational and Experimental Engineering and

44

Sciences, ICCES'05, Chennai, India, December 1-6, 2005.

202. Robinson, D., Hosur, M., Mahfuz, H., Rangari, V. K., Jeelani, S., "Optimization of

Ultrasonic Parameters & Manufacturing Process and Characterization of Nano-

phased Low Density Polyurethane Form,” 2005 ASME International Mechanical

Engineering Congress, Orlando, Florida, November 4-10, (2005).

203. Pervin, F.; Zhou, Y.; Rangari, V.K.; Jeelani, S.; "Evaluation of Thermal and

Mechanical Properties of Carbon Nano Fiber Reinforced SC-15 epoxy,” 2005 ASME

International Mechanical Engineering Congress, Orlando, Florida, November 4-

10, (2005).

204. Zhou, Y., Mao, P., Uddin M. F., Jeelani, S.; "High Strain rate Tensile Behavior of

Carbon Fiber Reinforced Aluminum Laminates,” 2005 ASME International

Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005).

205. Hosur, M., Mohammed, A., Jeelani, S., "Processing and Performance of

Polyurethane/nanoclay Nanocomposite Foams,” 2005 ASME International

Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005).

206. Zhou, Y.; Baseer, M. A.; Mahfuz, H., and Jeelani, S.; "Numerical Simulation on

Tensile Failure process of Unidirectional Carbon Prepregs with Different Matrix,”

Proceedings of the 20th Annual Technical Conference of the American Society for

Composites, September 7-9, (2005), Philadelphia, PA.

207. Pervin, F.; Zhou, Y.; Biswas, M.A.; Rangari, V.K.; Jelanee, S.; "Fabrication and

Characterization of Clay / Epoxy Nanocomposite,” CD Proceeding of 5th Annual

Automotive Composites Conference and Exhibition, September 12-14, (2005),

Tory, MI.

208. Zhou, Y.; Baseer, M. A.; Mahfuz, H.; Jeelani, S.; "Fabrication and Evaluation on

Nano-Phased Unidirectional Carbon Fiber Reinforced Epoxy,” CD Proceeding of 5th

Annual Automotive Composites Conference and Exhibition, September 12-14,

(2005), Tory, MI.

209. Zhou, Y.; Rangari, V.; Mahfuz, H.; Jeelani, S.; Mallick, P.K.; "Thermal and

Mechanical Behavior of Polypropylene, Talc-filled Polypropylene and

Polypropylene Nanocomposites,” International SAMPE Symposium and Exhibition

(Proceedings), v 50, SAMPE 05: New Horizons for Materials and Processing

Technologies - Conference Proceedings, (2005), p 1655-1657, May 2005, Long

Beach CA.

210. Zhou, Y.; Baseer, M. A.; Mahfuz, H.; Jeelani, S.; "Experimental Study on the Fatigue

Strength Distribution of T700 Carbon Fiber,” International SAMPE Symposium and

Exhibition (Proceedings), v 50, SAMPE 05: New Horizons for Materials and

Processing Technologies - Conference Proceedings, 2005, p 1625-1634, May

(2005), Long Beach CA.

211. Hosur, M. Mohammed, A., Jeelani, S. "Studies on the Synthesis and Characterization

of Polyurethane/Nanoclay Nanocomposite Foams," 20th American Society for

Composites Annual Technical Conference, September 7-9 (2005), Philadelphia, PA.

212. Hosur, M., Jain, K., Jeelani, S., "Studies On The Low-Velocity Impact Response Of

Carbon/Epoxy Composites Subjected To Environmental Conditioning," SAMPE

2005 Conference, Long Beach CA May 1-5, (2005).

213. Saha, M.C., Nilufar, S., and Jeelani, S., "Studies on Processing and Characterization

of Hollow Glass Microballoons Filled Composites," 2006 ASME International

Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 5-

45

10, 2006.

214. Saha, M.C., Kabir, M.E., and Jeelani, S., "Effect of Nanoparticles on Mode-I

Fracture Toughness," 2006 ASME International Mechanical Engineering Congress

and Exposition, Chicago, Illinois, November 5-10, 2006.

215. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Processing and Low- Velocity

Impact Performance of Nanophased Woven Carbon/Epoxy Composite Laminates,"

U.S Japan Conference on Composite Materials, Dearborn, Michigan, Sept. 20-22,

2006.

216. Robinson, D.C., Hosur M.V., and Jeelani, S., "Process Optimization and

Characterization of Low Density Polyurethane Foam," Proceedings of the 21st

Annual Technical Conference of the American Society for Composites, Dearborn,

MI, Sept. 17-20, 2006.

217. Saha, M.C., Nilufar, S., and Jeelani, S., " Processing and Performance Evaluation of

Syntactic Foams Infused with Nanoclay," 21st Annual Technical Conference of the

American Society for Composites, Dearborn, MI, Sept. 17-20, 2006

218. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Studies on Flexural and Thermal

Response of Hand-layup Carbon/SC-15 Epoxy Composites," SEM Annual

Conference & Exposition on Experimental and Applied Mechanics, St. Louis,

Missouri, June 5- 7, 2006.

219. Saha, M.C., Kabir, M.E., and Jeelani, S., "Core/Skin Debond Fracture Toughness of

S2-Glass/Epoxy Sandwich Composites with Nanophased Polyurethane Foam," SEM

Annual Conference & Exposition on Experimental and Applied Mechanics, Saint

Louis, Missouri, June 4-7, 2006.

220. Saha, M.C., Nilufar, S., and Jeelani, S., "Effect of Strain Rate on Compressive

Behavior of Syntactic Foam," 2006 SEM Annual Conference & Exposition on

Experimental and Applied Mechanics, Saint Louis, Missouri, June 4-7, 2006.

221. Farhana, P., Zhou, Y., Rangari, V., and Jeelani, S., "Fracture and Fatigue behavior

of carbon nano fiber reinforced epoxy,” Proceedings of the 2006 SEM Annual

Conference and Exposition on Experimental an d A p p l i ed Mechanics. Saint Louis,

Missouri, USA. June 4-7, 2006.

222. Hosur, M.V., Chowdhury, F.H., Mohammed A.A., and Jeelani, S., "Studies on the

Processing and Performance of Nanocomposites for Structural Applications," 23rd

Southeastern Conference in Theoretical and Applied Mechanics Mayagüez, Puerto

Rico, May 21 - 23, 2006.

223. Saha, M.C., Nilufar, S., and Jeelani, S., "Manufacturing and Characterization of

Hollow Spheres Filled Epoxy Composites," Twenty Second Southeastern

Conference on Theoretical and Applied Mechanics, Puerto Rico, May 21-23, 2006.

224. Chowdhury, F.H., Hosur, M.V., and Jeelani, S., "Fabrication and Characterization

of Plain Weave Carbon/Nanoclay-Epoxy Composites," SAMPE 2006, April 30-May

4, 2006, Long Beach, CA.

225. Farhana, F., Zhou, Y., Rangari, V., Jeelani, S.; "Fabrication and characterization of

carbon-CNF-epoxy nanocomposite,” SAMPE 2006, April 30-May 4 2006, Long

Beach CA.

226. Hasan M. M.; Zhou, Y., Mahfuz, H., and Jeelani, S.; "Effect of SiO2 nanoparticle

on tensile behavior of Nylon 6 at different strain rate,” SAMPE 2006, April 30-May

4 2006, Long Beach CA.

227. Rangari, V., Fredrick Baker, Tarig A. Hassan and Shaik Jeelani, “Thermal and

46

Mechanical Properties of SiC/SiO2 Epoxy Nanocomposite,” CANCOM-2007,

Winnipeg, Canada.

228. Rangari, V., Tarig A. Hassan, Quentin Mayo and Shaik Jeelani, “Effect of ultrasound

on tungsten oxide nanoparticles and its applications in epoxy nanocomposites,”

ICCM-16-2007, Kyoto, Japan.

229. Rangari, V., M.Yousuf and Shaik Jeelani, “Filament extrusion process, thermal and

mechanical characterization of nylon6-and Silicon carbide coated Silicon nitride

nanoparticle,” Proceedings of International and INCCOM-6 Conference Future

Trends in Composite Materials and Processing, December 12-14, 2007, Indian

Institute of Technology Kanpur, India.

230. Mahesh V. Hosur, Orion Gebremedhin, Shaik Jeelani, “Processing and Performance

Evaluation of Epon 828,” CD Proceedings of the ASME International Mechanical

Engineering Congress and Exposition, 11-15 November 2007, Seattle, WA.

231. Sandrea B. Young, Merlin Theodore, Mahesh V. Hosur, Shaik Jeelani

“Characterization of Amine Functionalized Multi-Walled Carbon Nanotubes Epoxy-

Based Nanocomposites,” CD Proceedings of the SAMPE Fall Meeting, October 29-

November 1, 2007,Cincinnati, OH.

232. Wanda D. Jones, Rangari, V., and Shaik Jeelani, “Mechanical and Thermal

Properties of Epoxy based Composites with POSS modified Carbon Nanotubes,”

SAMPE- Oct 29-1 Nov. 2007.

233. Jessie Mayo B. Jr., Mahesh V. Hosur, Shaik Jeelani “Dynamic and Quasi- Static

Stab Resistance of Thermoplastic and Silica-Polyethylene Glycol Gel Infused

Fabrics,” CD Proceedings of the 22nd Annual Technical Conference of the

American Society for Composites, September 17–19, 2007, Seattle, WA.

234. Rodgers, R., Mahfuz, H., Rangari, V., Jeelani, S., Carlsson, L, “Tensile Response

of SiC-Nanoparticles Reinforced Epoxy Composites at Room and Elevated

Temperatures,” 16th Intl. Conference on Composite Materials (ICCM-16), Kyoto,

Japan, July 8-13, 2007, Paper presented and published in the CD Proceeding..

235. 245.Dangale C. Robinson, Mahesh V. Hosur, Shaik Jeelani, “Process Optimization

and Characterization of Low Density Polyurethane Foam,” CD Proceedings of the

16th International Conference on Composite Materials, July 8-13, 2007, Kyoto,

Japan.

236. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani “Characterization

of Epon 862 Reinforced With Functionalized MCNT's,” CD Proceedings of the 16th

International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan.

237. Mahesh V. Hosur, Aleem A. Mohammed, Shaik Jeelani, “Impact Response of

Nanophased Polyurethane Foam Core Sandwich Composites,” CD Proceedings of

the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto,

Japan.

238. M. V. Hosur, J. B. Mayo Jr., E. Wetzel, and S. Jeelani, “Studies on the Fabrication

and Stab Resistance Characterization of Novel Thermoplastic- Kevlar Composites,”

CD Proceedings of the International Conference on Materials for Advanced

Technologies- ICMAT-2007, July 1-6, 2007, Singapore.

239. 249.O. Gebremedhin, M. V. Hosur, J. Thomas, S. Jeelani, “Processing and

Performance of Nanoclay infused EPON-828,” CD Proceedings of the

SAMPE 2007, June 4-8, 2007, Baltimore, MD.

240. Wanda D. Jones, Rangari, V., and Shaik Jeelani, “Decoration of carbon nanotubes

47

with magnetite nanoparticles and its applications in polymer composites,” SAMPE-

2007, Baltimore, June 7.

241. M. Theodore, M. V. Hosur, J. Thomas, S. Jeelani, “Effect of functionalization on the

properties of multi-walled carbon nanotubes,” CD Proceedings of the SAMPE 2007,

June 4-8, 2007, Baltimore, MD.

242. Rangari, V., Tarig A. Hassan and Shaik Jeelani, “Synthesis and Characterization of

Shear Thickening Fluid for Body Armor Applications,” SAMPE-2007, Baltimore,

June 7.

243. Vijaya K. Rangari, Tarig A. Hassan, Clifton Mayo and Shaik Jeelani, “Titanium

Carbide Infused Phenolic Balsa Foam Nanocomposite,” Plasticity 2007: Alyeska

(Alaska), June 2-6, 2007.

244. M. Theodore, M. V. Hosur, J. Thomas, and S. Jeelani, “Processing and

Characterization of Epon 862 reinforced with functionalized MWCNT’s,” 2007 NIST

Nanotechnology Conference and Trade Show, May 20-24, 2007, Santa Clara,

California, U.S.A.

245. Yuanxin Zhou, Everett White, Shaik Jeelani, “Effect of particle size on the

mechanical properties of polymer matrix nanocomposite,” Nanotech 2007, Santa

Clara, CA, USA, May 22, 2007

246. Yuanxin Zhou, Sajedur Rahman Akanda, Shaik Jeelani, “Nonlinear constitutive

equation for vapor-grown carbon nanofiber-reinforced SC-15 epoxy at different

strain rate,” ANTECH 2007, Cincinnati, OH, USA, May 8, 2007

247. J. Mayo, M. V. Hosur, E. Wetzel, S. Jeelani, “Resistance of Novel Thermoplastic-

Kevlar Composites to Spike Penetration,” 2nd International Conference on recent

advanced in composite materials, Feb. 20-23, 2007, New-Delhi, India.

248. M. V. Hosur, A. A. Mohammed, S. Jeelani, “Impact Response of the Nanophased

Foam Core Sandwich Composites,” 2nd International Conference on recent advanced

in composite materials, Feb. 20-23, 2007, New-Delhi, India.

249. M. V. Hosur, S. Krishnamoorthy, S. Jeelani, “Processing and Mechanical

Performance of Woven Fabric Carbon/Polyimide Composites,” 2nd International

Conference on recent advanced in composite materials, Feb. 20- 23, 2007, New-

Delhi, India.

250. M. V. Hosur, F. H. Chowdhury, S. Jeelani, “Impact Performance of Nanophased

Woven Fabric Carbon/Epoxy Composite Laminates,” International Conference on

Computational and Experimental Engineering and Sciences, ICCES’07, January 3-

8, 2007, Miami, FL.

251. Mahesh Hosur, Merlin Theodore, Shaik Jeelani, “Effect of Functionalization on the

Morphology, Cure Kinetics and Mechanical Behavior of Thermosetting Polymers,”

Proceedings of the IUTAM-MMSS2008 Symposium on Multifunctional Materials,

Structures and Systems, December 10-12, 2008, Bangalore, India.

252. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and Performance

of Nanophased Braided Carbon/Epoxy Composites,” Proceedings of the 2nd

International Symposium on Advanced Materials and Polymers for Aerospace and

Defense Applications (SAMPADA-2008), December 8-12, 2008, Pune, India.

253. Rangari, V., Mohmmad S. Bhuyan and Shaik eelani, “Microwave processing and

charactering of Epoxy 862/CNT nanocomposites,” SAMPADA-2008, Dec 8-12,

University of Pune, India

254. Rangari, V., M. Yousuf, M. Ghouse and Shaik Jeelani, “Thermal and mechanical

48

characterization of polymer nanocomposites of Si3N4/ Polypropylene fibers,”

ISAMPE National Conference on Composites : INCCOM-7, National Aerospace

Laboratories, Bangalore-17 (NAL’s Golden Jubilee Year 2008)

255. Mahesh V. Hosur, Tamanna Rahman, Sandrea Brundidge-Young, and Shaik Jeelani,

“Mechanical and Thermal Properties of Amine Functionalized Multi- walled Carbon

Nanotubes Epoxy Based Nanocomposite,” Proceedings of the Second International

Conference on Polymer Blends, Composites, IPNs, Membranes, Poly Electrolytes

and Gels, Macro to Nano Scales (ICBC-2008), September 22-24, 2008, Kottayam,

Kerala, India.

256. Mahfuz, H. and Khan, M., “Synthesis and Characterization of Low Density

Polyethylene (LDPE) Reinforced with Functionalized CNTs,” ASME International

Mechanical Engineering Congress and Exposition, October 31 – November 6, 2008,

Boston, Massachusetts, Presented and published in the Conference Proceedings.

257. Md. A. Bhuiyan, Mahesh Hosur, Yaseen Farooq, Shaik Jeelani, “Mechanical and

Thermal Properties of Carbon-Nanofiber Infused Polyurethane Foam,” ASME

IMECE, Nov. 2008, Boston, MA.

258. Mary E. Moore, Mahesh Hosur, Adriane G. Ludwick, and Shaik Jeelani,

“Preparation and Characterization of Layered Silicate Nanocomposites Based on

Resole Phenolic Resins and Brominated Resole Phenolic Copolymer Resins,” CD

Proceedings of the Annual technical Conference of American Society for

Composites, Sept. 9-11, 2008, Memphis, TN.

259. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, “Characterization

of neat and nanophased epoxy polymers subjected to accelerated aging conditions,”

CD Proceedings of the Annual technical Conference of American Society for

Composites, Sept. 9-11, 2008, Memphis, TN.

260. Tiffany Nelson, Mahesh Hosur, John LaScala, Shaik Jeelani, “Synthesis and

Characterization of Modified Soybean Oil and Methacrylated Fatty Acid Derived

Resins for Sheet Molding Compounds,” CD Proceedings of the Annual technical

Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN.

261. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, “Durability Study

of Neat/ Nanophased GFRP Composites Under Different Environmental

Conditioning,” CD Proceedings of the Annual technical Conference of American

Society for Composites, Sept. 9-11, 2008, Memphis, TN.

262. B. Dey, Yuanxin Zhou, Mahesh Hosur, Shaik Jeelani, Ashok Kumar, L. D.

Stephenson, “Evaluation of Thermal Effects on Mechanical Properties of Epoxy,

Carbon Fiber and Carbon/epoxy Composite,” CD Proceedings of the Annual

technical Conference of American Society for Composites, Sept. 9-11, 2008,

Memphis, TN.

263. Dangale C. Robinson, Mahesh V. Hosur, Shaik Jeelani, “Processing and

Performance of Nanoclay Infused Low Density Polyurethane Foams,” CD

Proceedings of the Fall Meeting of the Society for Advancement of Materials and

Process Engineering (SAMPE), Sept. 9-11, 2008, Memphis, TN.

264. Harish M Rao, Jessie Mayo. Jr., Mahesh V. Hosur, and Shaik Jeelani, “Stab

Characterization of Ballistic Fabrics Impregnated With Shear Thickening Fluid,” CD

Proceedings of the Fall Meeting of the Society for Advancement of Materials and

Process Engineering (SAMPE), Sept. 9-11, 2008, Memphis, TN.

265. Rangari, V., Ghouse, M. Mohammal , Shaik Jeelani, Komal Vig, Seyhan Boyoglu,

49

Shree Ram Singh, and Shreekumar Pillai, “Synthesis of Nylon/CNT/Ag fiber for

antimicrobial textile applications,” Force Health Protection - Prevention is the Key,

11th Annual Force Health Protection Conference, Albuquerque Convention Center

Albuquerque, New Mexico 9 - 15 August 2008.

266. Rangari, V., M. Y. Shaik, and S. Jeelani, “Characterization of nanocomposite

materials using electron microscopy,” Microscopy & Microanalysis 2008

Meeting, August 3-7, 2008, Albuquerque Convention Center, Albuquerque, New

Mexico

267. W.D. Jones, V. Rangari, S. Jeelani, “Thermal and Mechanical Response of POSS

coated Nanophased expandable foam core materials,” NSTI, Nanotech June 1-5,

Boston-2008,

268. Rangari, V., S. Dey, S. Jeelani, “In-situ synthesis of Cu nanoparticles on

MWCNTS using Microwave irradiation,” NSTI, Nanotech June 1-5, Boston-2008,

269. N. Wright Bolden, V. Rangari, S. Jeelani, “Synthesis of magnetic nanoparticles

and its applications in drug delivery systems,” NSTI, Nanotech June 1-5, Boston-

2008,

270. Rangari, V., G. M. Mohammad, S. Jeelani, “Fabrication of Nylon nanocomposite

fibers for Antimicrobial Textile applications,” The 2nd International Conference on

Heterogeneous Materials Mechanics (ICHMM-2008) June 3-8, 2008 Huangshan,

China

271. Mahesh Hosur, Farhan Chowdhury, Orion Gebremedhin, Shaik Jeelani, “Recent

Advanced on the Effect of Nanoclay on the Properties of Epoxies and Fiber

Reinforced Polymer Composites,” Second International Conference on

Heterogeneous Materials Mechanics, June 5, 2008, Huangshan, China.

272. Rangari, V., Tarig A. Hassan and Shaik Jeelani, “Synthesis and Mechanical

Properties of Shear Thickening Fluid/Kevlar Composite for Body Armor

Application,” SAMPE '08 Long Beach, Material and Process Innovations: Changing

our World, May 16-21, 2008

273. Y. X. Zhou, B. Dey, M.V. Hosur, S. Jeelani, A. Kumar, and L. D. Stephenson, “Effect

of degraded Matrix on the Tensile Failure Process of Unidirectional Carbon Fiber

Reinforced Epoxy,” Proceedings of the International Conference of Computational

and Experimental Engineering and Sciences, ICCES’08, March 15-21, 2008,

Honolulu, HI.

274. M. V. Hosur, M. M. Islam, S. Jeelani, “Low-Velocity Impact of Braided

Carbon/Epoxy Composites,” Proceedings of the International Conference of

Computational and Experimental Engineering and Sciences, ICCES’08, March

15-21, 2008, Honolulu, HI.

275. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur and Shaik

Jeelani, “Mechanical and Thermal Characterization of CNF-Filled Polyester

Nanophased Composite,” International Conference of Mechanical Engineering,

Dakha, Bangladesh, December 26-28, 2009.

276. M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Comparison of Static

and Dynamic Behavior of Nanophased Glass Polyester Composite,” ASME

International Mechanical Engineering Congress and Exposition 2009, November 13-

19, 2009, Lake Buena Vista, Florida.

277. Gregory Strawder, Mahesh Hosur, Jeelani, and Yuanxin Zhou, “Thermal and

Mechanical Studies of Wood Flour Reinforced Polyurethane Composites,” ASMPE

http://www.nsti.org/Nanotech2008/showabstract.html?absno=837








50

Fall Meeting, Wichita, Kansas, October 19-21, 2009.

278. Dangale C. Robinson Meda, Mahesh V. Hosur, and Shaik Jeelani, “Process

Optimization and Characterization of Nanoclay Infused Polyurethane Foam,” The

1st joint American- Canadian International Conference on Composites September

17, 2009.

279. Yuanxin Zhou, M S. Shaik, Shaik Jeelani, Thomas E. Lacy, “Fabrication and

Characterization of Vapor Grown Carbon Nanofiber Reinforced Polyester,”

American Society for Composites 2009 Annual Technical Conference, Newark, DE,

USA, September 15, 2009.

280. Mohammad K. Hossain, Muhammad E. Hossain, Mahesh Hosur, and Shaik Jeelani,

“Comparison of Low Velocity Impact Behavior of Conventional Glass‐Polyester and

CNF‐Filled Glass Polyester Nanophased Composites,” The 1st joint American-

Canadian International Conference on Composites September 16, 2009.

281. S. Zainuddin, M. V. Hosur, R. Barua, and A. V. Anafo, Ashok Kumar and S. Jeelani,

“Effects of Ultraviolet Radiation and Condensation on Static and High Strain

Rate Behavior of Nanophased Glass/ Epoxy Composites,” The 1st joint American-

Canadian International Conference on Composites September 16, 2009.

282. Jessie B. Mayo, Mahesh V. Hosur, and Shaik Jeelani, Eric D. Wetzel “Cut

Behavior of High Performance Fibers,” The 1st joint American- Canadian

International Conference on Composites September 17, 2009.

283. Yuanxin Zhou, M.S. Shaik, Shaik Jeelani, Thomas Lacy, Mark F. Horstemeyer,

“Experimental Study on Thermal and Mechanical Properties of Clay Modified

Carbon Fiber Reinforced epoxy,” American Society for Composites 2008 Annual

Technical Conference, Memphis, TN, USA, September 11, 2008.

284. S. Akanda, Yuanxin Zhou, Shaik Jeelani, “Effect of Structure on Electrical

conductance of Single Wall Carbon Nanotubes,” American Society for Composites

2008 Annual Technical Conference, Memphis, TN, USA, September 11, 2008.

285. N Wright Bolden, V. Rangari, S. Jeelani, “Synthesis of drug loaded iron oxide

nanoparticles,” ICCM-17 17th International Conference on Composite Materials, 27

Jul 2009 - 31 Jul 2009, Edinburgh International Convention Centre (EICC),

Edinburgh, UK

286. T. Nelson, M. V. Hosur, S. Jeelani, “Development of Bio-Based, Hazardous Air

Pollutant Free Sheet Molding Compounds,” International Conference on Composite

Materials, ICCM-17, Edinburgh, UK, July 30, 2009.

287. M. V. Hosur, Md. A Bhuiyan, S. Jeelani, “Low-Velocity Impact Response of

Sandwich Composites with Nanophased Core,” International Conference on

Composite Materials, ICCM-17, Edinburgh, UK, July 27, 2009.

288. Rangari, V., Mohammad S. Bhuyan, Shaik Jeelani, “Synthesis, Comparative Study

of Thermal and Microwave cured Epon862/CNFs Nanocomposites,” ICCM-17 17th

h International Conference on Composite Materials 27 Jul 2009 - 31 Jul 2009,

Edinburgh, International, Convention Centre (EICC), Edinburgh, UK

289. S. Zainuddin, M. V. Hosur, A. Kumar, S. Jeelani, “Durability Studies of Nanophased

FRP Composites under synergistic exposure conditions,” International Conference on

Composite Materials, ICCM-17, Edinburgh, UK, July 27, 2009.

290. M. V. Hosur, Md. A. Bhuiyan, S. Jeelani, “Impact Response of Nanophased Foam

Core/Braided Face Sheet Sandwich Composites,” 2009 Annual Society for

51

Experimental Mechanics Conference, Albuquerque, NM, June 1-4, 2009.

291. H. Rao, M. V. Hosur, J. Mayo, S. Burton, S. Jeelani, “Stab Characterization of Hybrid

Ballistic Fabrics,” 2009 Annual Society for Experimental Mechanics Conference,

Albuquerque, NM, June 1-4, 2009.

292. S. Zainuddin, M. V. Hosur, A. Tcherbi-Narteh, Ashok Kumar and S. Jeelani,

“Dynamic Compression Response of Nanophased Composites Subjected to UV

Radiation,” 2009 Annual Society for Experimental Mechanics Conference,

Albuquerque, NM, June 1-4, 2009.

293. T. Nelson, M. Hosur, S. Jeelani, A. Netravali, “Physical and Mechanical

Characterization of Alkali Treated Kenaf Fibers,” SAMPE 2009 Conference,

Baltimore, MD, May 2009.

294. V. Rangari, G. M. Mohammad, S. Jeelani, Y. U.Butenko, V. R. Dhanak, “Fabrication

of Nylon Nano Diamond Coated MWCNT Composite Fibers,” SAMPE ’09

Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009

295. V. Rangari, T. A. Hassan, V. K. Rangari, S. Jeelani, “Synthesis and Characterization

of Calcium Carbonate Nanoparticles Derived from Eggshell,” SAMPE ’09

Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009

296. N. W. Bolden, V. K. Rangari, S. Jeelani, “Synthesis and Characterization of Drug

coated Magnetic Nanoparticles,” SAMPE ’09 Conference and Exhibition,

Baltimore, Maryland, May 18-21, 2009

297. L. Adiani, P. Subbarayan, S.Boyoglu, K. Vig, S. Pillai, V. Rangari, S.R. Singh,

“Silver Coated Carbon Nanotubes Inhibit RSV Infection,” Nanotech Conference &

Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX.

298. .K. Vig, S. Boyoglu, V. Rangari, S. Pillai, S.R. Singh, “Respiratory Syncytial Virus

Inhibition by Gold and Titanium Nanoparticles,” Nanotech Conference & Expo,

George R.Brown Convention Center, May 3-7, 2009, Houston, TX

299. D. Ashour, P. Subbarayan, L. Adiani, S. Boyoglu, G. Mohammad, V. Rangari, S.

Jeelani, S. Ram Singh, S. Pillai, “Antimicrobial properties of silver coated CNT,”

Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009,

Houston, TX,

300. T.A. Hassan, Rangari, V., S. Jeelani, “Synthesis and Characterization of Calcium

Silicate via mechanochemical and Sonochemical method,” Nanotech Conference &

Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX,

301. M. E. Moore, M. Hosur, S. Jeelani, “Effect of Bromine Position on the Thermal

Properties of Brominated Resole Phenolic Resins,” SAMPE 2009 Conference,

Baltimore, MD, May 2009.

302. Yuanxin Zhou, Sajedur Akanda, Mahesh Hosur, Shaik Jeelani, “Atom Scale

Simulation of Contact Resistance between Two Single-Walled Carbon Nanotubes,”

SAMPE 2009 Conference, Baltimore, MD, May 2009.

303. Mahesh V. Hosur, Md. Mazedul Islam, Aziz Ahmed, Shaik Jeelani, “Low Velocity

and High Strain rate Compression Response of Braided Carbon/Epoxy Composites,”

SAMPE 2009 Conference, Baltimore, MD, May 2009.

304. J. Mayo, Jr., A. Lewis, M. V. Hosur, S. Jeelani, “Cut Studies of Brittle and Ductile

Fibers,” SAMPE 2009 Conference, Baltimore, MD, May 2009.

305. M. E. Moore, M. V. Hosur, A. G. Ludwick, and S. Jeelani, “Effect of Bromine

Substitution and Position on the Thermal Stability and Thermal decomposition

Kinetics of Brominated Resole Phenolic Resins,” American Chemical Society

http://www.nsti.org/Nanotech2009/abs.html?i=357

52

Conference 2009, Salt Lake City, UT, March 2009

306. Rangari, V., Mohmmad S. Bhuyan and Shaik Jeelani, “Synthesis, Thermal and

Mechanical characterization of Microwave cured Epoxy/CNTs nanocomposites,”

ICCST/7 –Seventh International Conference on Composite Science and

Technology Jan, 20-22, 2009 - SHARJAH, UNITED ARAB EMIRATES

307. Rangari, V., Sanchita Dey and Shaik Jeelani, Decoration of Ag-Cu nanoparticles on

Multiwalled carbon nanotubes and their applications in polymer composites, MRS,

Spring, April 5-9, 2010, San Francisco, CA.

308. Tarig Hassan, Vijaya K Ragnari and Shaik Jeelani, Synthesis, Fabrication, Thermal

and Mechanical Characterization of Eggshell Based Bio- Nanocomposites,, Gordon

Research Conference – Composites, January,17-22, 2010, Ventura, CA

309. N. Wright Bolden, Rangari, V., S. Jeelani, S. Boyoglu, J. Babu, Synthesis,

Characterization and analysis of iron oxide –paclitaxel microspheres,, Gordon

Research Conference – Composites, January,17-22, 2010, Ventura, CA.

310. Rangari, V., M. Ghouse and Shaik Jeelani, Fabrication and characterization of

high strength nanocomposite single fibers for multifunctional applications., INDO-

US WORKSHOP ON NANOTECHNOLOGY: APPLICATIONS AND

IMPLICATIONS, Indian Institute of Chemical Technology, Hyderabad November

10-12, 2009

311. Tarig Hassan, Ragnari, V., and Shaik Jeelani, Sonochemical Synthesis and

Characterization of Bio-Based Hydroxyapatite Nanoparticles, MRS Fall Meeting,

Nov 30-Dec 4, 2009, Boston, MA

312. Rangari, V., M. Ghouse, Shaik Jeelani, Fabrication and Characterization of High

Strength Antimicrobial Nanocomposite Fibers, ASME International Mechanical

Engineering Congress & Exposition, Nov 13-19, 2009, Lake Buena Visa, FL’

313. Rangari, V., Rahman Samsur, Shaik Jeelani, Growth mechanism of MWCNTs using

nanoparticles as catalysts Joint Canadian-American Society for Composites,

Twenty-fourth Technical Conference, Sept 15-17 2009, University of Delaware,

Delaware

314. Ragnari, V., and Shaik Jeelani, Synthesis of Bio Calcium Carbonate Nanoparticles

by Size Reduction of Eggshell, Tarig Hassan, , MRS Spring Meeting,April,13-

17,2009, San Francisco, CA

315. Sirajus Salekeen, M.G.Kibria Khan, Mahesh Hosur, and Shaik Jeelani, “Ballistic

Properties for Nano-Infused Epoxy Composite/Ceramic Armor,” International

Conference on Composites Science and Technology, Sharjah, UAE, Jan 21, 2009.

316. Mahesh Hosur and Shaik Jeelani, “Polymer Matrix/MWCNT Nanocomposites:

Challenges and Opportunities as Materials for Structural Applications,” “Carbon

Nanotechnology: Potential and Challenges,” with a theme of “Innovations in Carbon

Nanotechnology for the New Century,” 15-17 December 2010, Kanpur, India

(invited).

317. M. K. Hossain, M. W. Dewan, M. Hosur and S. Jeelani, “Thermal and Mechanical

Characterization of Jute-Biopol Nanophased Green Composites,” MRS Fall Meeting

2010, Boston, MA, November 29-December 03, 2010.

318. 330.M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Study of Mechanical

Responses and Thermal Expansion of CNF-modified Polyester Nanocomposites

Processed by Different Mixing Systems,” MRS Fall Meeting 2010 Boston, MA,

November 29-December 03, 2010.

53

319. Mohammad K Hossain, Kazi Al Imran, Mahesh Hosur and Shaik Jeelani, “Effect of

Seawater on Thermal Behavior of Conventional and Nanophased Carbon/Epoxy

Composites,” MRS Fall Meeting 2010Boston, MA, November 29-December 03,

2010

320. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, “Static and

High Strain Rate Compression Response of Carbon/Epoxy- Nanoclay Composites

Subjected to Synergistic Effect of UV Radiation and Condensation,” 7th Asian

Australasian Conference on Composite Materials, ACCM-7, 15-18 November, 2010,

Taipei, Taiwan.

321. Shaik Zainuddin, Mahesh Hosur, Harish Rao, Rajib Barua, Shaik Jeelani, Ashok

Kumar, Jonathan Trovillion, “Influence of Non-Functionalized and Functionalized

MWCNTs on Mechanical and Thermal Properties of Epoxy Composites,”

International Mechanical Engineering Congress and Exposition, IMECE 2010,

November 12-18, Vancouver, Canada.

322. M. K. Hossain, M. W. Dewan, M. Hosur and S. Jeelani, “Interfacial Improvement of

Nanopahsed Jute-Based Green Composite by Surface Modification,” ASME

International Mechanical Engineering Congress and Exposition 2010, Vancouver,

British Columbia, Canada, November 12-18, 2010.

323. M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Investigation of Carbon

Nanofibers (CNFs) Effects on the Flexural and Thermal Behavior of E-

Glass/Polyester Composites” ASME International Mechanical Engineering Congress

and Exposition 2010. British Columbia, Canada, November 12-18, 2010

324. S. Zainuddin, M. V. Hosur, R. Barua, H. Rao and S. Jeelani, “Influence of amino

functionalized multi-walled carbon nanotube reinforcement on the mechanical and

thermal properties of SC-15 epoxy nanocomposite,” ‘nano Future’, for the 21st

Century, International conference on “Nanotechnology – Materials and Composites

for Frontier Applications,” 14-15, October, 2010, Pune, India (Invited).

325. Alfred Tcherbi-Narteh, Mahesh V. Hosur, Shaik Zainuddin, Shaik Jeelani,

“Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites

Subjected to UV Radiation and Condensation,” International Mechanical

Engineering Congress and Exposition, IMECE 2010, November 12-18, Vancouver,

Canada.

326. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani

“Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites

Subjected to UV Radiation and Condensation,” SAMPE Fall Conference, 11-14

October, 2010, Salt Lake City, UT.

327. M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Comparison of High Strain

Rate Compressive Responses of Conventional and CNF-Filled Nanophased E-

Glass/Polyester Composites,” Materials Science & Technology 2010 Conference &

Exhibition. Houston, TX, October 17-21, 2010.

328. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, “Processing and

Characterization of VGCNF Infused Epoxy Nanocomposites Using Three Different

Techniques,” SAMPE Fall Conference, 11-14 October, 2010, Salt Lake City, UT.

329. Mahesh V. Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar,

Jonathan Trovillion, “Processing Optimization and Characterization of MWCNT

infused Epoxy Nanocomposites Using Three Different Techniques,” proceedings of

the American Society for Composites, technical conference, Sept. 19-21, 2010,

54

Dayton, OH.

330. G. Strawder, M. Hosur, S. Jeelani, “Thermal and Mechanical Studies of Wood Flour

Reinforced Polyurethane Composites,” proceedings of the American Society for

Composites, technical conference, Sept. 19-21, 2010, Dayton, OH.

331. M. K. Hossain, M.W. Dewan, M. Hosur, S. Jeelani, “Mechanical and Thermal

Characterization of Modified Jute/Biopol Nanophased Green Composite,”

Proceedings of the American Society for Composites, Technical conference, Sept.

19-21, 2010, Dayton, OH.

332. M. K. Hossain, M. Hosur, S. Jeelani, “Effects of CNF on Compression and Thermal

Responses of E-Glass/Polyester Nanocomposite,” Proceedings of the American

Society for Composites, technical conference, Sept. 19-21, 2010, Dayton, OH.

333. Alfred Tcherbi-Narteh, M.V. Hosur, S. Jeelani, “Effect of UV Radiation on

Mechanical and Thermal Properties of Carbon Fiber Reinforced Polymer

Composites,” Proceedings of the American Society for Composites, technical

conference, Sept. 19-21, 2010, Dayton, OH.

334. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar,

Jonathan Trovillion, Yadira Perez, “Processing and Characterization of Epoxy

Nanocomposites with MWCNTs/CNFs Using Thinky and 3-Roll Shear Mixing

Techniques,” 1st TMS-ABM International Materials Congress, July 26-30, 2010,

Rio de Janeiro, Brazil.

335. Mahesh Hosur, Md. Atiqur Rahman, Shaik Jeelani, “Impact Response of Nanophase

Foam Core Sandwich Composites with Braided Carbon/Epoxy Facings,” 9th

International Conference on Sandwich Structures, ICSS 9, Pasadena, CA, June 14-

16, 2010.

336. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik

Jeelani and Rangari, V., “High Strain Rate Compression Behavior of Conventional

and CNF-Filled-Nanophased Glass/Polyester Composites,”, Proceedings of the

NSTI-Nanotech Conference, CA, USA, June 21-24 (2010).


Jeelani and Rangari, V., “Fabrication and Thermo-mechanical Characterization of

CNF-Filled Polyester and E-Glass/Polyester Nanophased Composites,” Proceedings

of the NSTI-Nanotech Conference, CA, USA, June 21-24 (2010).


Jeelani and Rangari, V., “High Strain Rate Compression Behavior of Conventional

and CNF-Filled-Nanophased Glass/Polyester Composites,” Proceedings of the

NSTI-Nanotech Conference, CA, USA, June 21-24 (2010).

339. Mohammad K. Hossain, Muhammad E. Hossain, Mahesh V. Hosur and Shaik

Jeelani, “Dynamic Characterization of CNF-Filled E-Glass/Polyester Nanophased

Composite,” Proceedings of the SAMPE ’10, the International SAMPE Symposium

and Exhibition, Seattle, WA, USA, May 17-20 (2010).

340. Y. Zhou, E. White II, M. Hosur, S. Jeelani, “Influence of TiO2 Nanoparticles on

Flexural Properties of Epoxy,” Proceedings of the SAMPE ’10, the International

SAMPE Symposium and Exhibition, Seattle, WA, USA, May 17-20 (2010).

341. Md. A. Bhuiyan, M. V. Hosur, S. Jeelani, “ Low-Velocity Impact Behavior of

Sandwich Composites with Neat and Nanophased Foam Core and Triaxial (0±45°

and 0±60°) Braided Carbon Fiber Face Sheets, International Conference on

Computational & Experimental Engineering and Sciences, ICCES10, Las Vegas,

55

March 29-April 2, 2010.H.

342. Mahfuz, F. Powell, R. Granata, M. Hosur, “Treatment of Carbon Fibers with POSS

and Enhancement in Mechanical Properties of Composites,” Proceedings of the

SAMPE ’10, the International SAMPE Symposium and Exhibition, Seattle, WA,

USA, May 17-20 (2010).

343. Rangari, V., Sanchita Dey, Mohammad Ghouse, Shaik Jeelani, Metal and metal

oxide coated CNTs their applications in thermoset and thermoplastic polymers,

,International Conference on Carbon Nanotechnology: Potential and Challenges,

Indian Institute of Technology Kanpur, INDIA, December 15-17, 2010.

344. Rangari, V., T. A. Hassan, S.Jeelani R. K. Rana, Size Reduction of Egg Shell

Particles: The Effect of Ball Milling and Sonication Time Variation, MRS- Fall

meeting Nov 30th 2010, Boston.

345. Rangari, V., A. Perveen and S. Jeelani, Synthesis and Crystal Growth of Iron Oxide

Nanoparticles for Drug Delivery Applications, MRS-Fall meeting Nov 29- 2010,

Boston

346. Rangari, V., M. Ghouse, Seyhan Boyoglu and Shaik Jeelani, Synthesis of ZnO/CNTs

hybrid nanoparticles and their reinforcement in Nylon-6 polymer fibers, ACCM-7

(The 7th Asian-Australian Conference on Composite Materials) Nov 15-18, 2010,

Taipei, Taiwan

347. Tarig A. Hassan, Rangari, V., and Shaik Jeelani, Bio-based Calcium Carbonate

Nanoparticles and their polymer nanocomposites, ICNP, September 24-26, 2010,

Kottayam, Kerala , India.

348. Rangari,V., Sanchita Dey and Shaik Jeelani, Synthesis of Au and Au/Cu alloy

nanoparticles on multiwalled carbon nanotubes by using microwave irradiation, 18th

Congress IFHTSE, July, 26 to 30, 2010, in Rio de Janeiro - RJ - Brazil,

349. Rangari, V., SanchitaDey, and S. Jeelani, Synthesis and microscopic characterization

of metal and metal alloy nanoparticles coated CNTs hybrid composites, M&M

(Microscopy and Microanalysis), August1-5, 2010, Portland, OR.

350. Rangari, V., M. Yousuf, S. Jeelani, Alignment of Si3N4 nanorods in Polypropylene

single fibers, Nanotech June 21-24, 2010, Anaheim, CA.

351. T.A. Hassan, Rangari, V., V. Fallon, Y. Farooq, S. Jeelani, Mechanochemical and

Sonochemical Synthesis of Bio Based Nanoparticles Nanotech June 21-24, 2010,

Anaheim, CA.

352. Rangari, V., Sanchita Dey and S Jeelani, Synthesis and characterization of

Ag/CNTs and their polymer nanocomposites, SAMPE-2010, May 17-20, 2010,

Washington State Convention Center, Seattle, WA.

353. Tarig A. Hassan, Rangari, V., an Shaik Jeelani, Synthesis and characterization of

eggshell/polylite bio nanocomposites, SAMPE-2010, May 17-20, 2010, Washington

State Convention Center, Seattle, WA.

354. Rangari, V., Md. Reza-E-Rabby, Shaik Jeelani, Synthesis and XPS characterization

of SiC/Polyhedral oligomeric sil-sesquioxane, SAMPE-2010, May 17-20, 2010,

Washington State Convention Center, Seattle, WA.

355. Synthesis and Characterization of Bio-based CaCO3/Polylite polymer

nanocomposites, Tarig A. Hassan, Vijay K. Rangari and Shaik Jeelani, ICME-2011,

18-20 December 2011, BUET, Dhaka, Bangladesh.

56

356. Thermal and Mechanical Properties of Microwave curedSiC/ EPOXY

Nanocomposites. V.K.Rangari, Md. Reza-E-Rabby, S. Jeelani, ICCM-18

International Conference of Composite Materials Jeju, Korea Aug 21st-26th 2011.

357. Synthesis and characterization of Hybrid titanium/ calcium carbonate nanoparticles

for Tissue regeneration applications Ashley Heard, Vitus Apalangya, Vijaya K

Rangari and Shaik Jeelani, 241st ACS National Meeting & Exposition, March 27-31,

2011, Anaheim, CA.

358. In-situ growth of CNTs on Woven Carbon Fiber for Advanced Structural

Applications, V.K. Rangari, R. Samsur, S. Jeelani,SAMPE-May 23-26, 2011, Long

Beach, CA.

359. Synthesis and Characterization of Poly(Methyl Methacrylate)/Aerosil Silica

Nanocomposite Thin Films, V.K. Rangari, A. Gaines, S. Jeelani, SAMPE-May 23-

26, 2011, Long Beach, CA.

360. M. V. Hosur, H. Maroju, and S. Jeelani, “Effect of Alkali Treatment on the

Performance of Flax Fiber Reinforced Polyester Composites,” Proceedings of the

International Conference on Mechanical Engineering (ICME 2011), Dhaka,

Bangladesh.

361. M. B. A. Salaam, M. V. Hosur, S. Zainuddin and S. Jeelani, “Characterization of NH2-

MWCNT/Epoxy Nanocomposites Using Two Different Cure Cycles,” Proceedings

of the International Conference on Mechanical Engineering (ICME 2011), Dhaka,

Bangladesh.

362. M. M. Rahman, S. Zainuddin, M. V. Hosur, A. Kumar, J. Trovillion, and S. Jeelani,

“Effect of Enhanced Cross-link Density on Interfacial Shear Strength of E-

Glass/Epoxy Composites Modified by Amino-Functionalized MWCNTs”,

Proceedings of the International Conference on Mechanical Engineering (ICME

2011), Dhaka, Bangladesh.

363. N. Jahan, M. V. Hosur, S. Zainuddin, and S. Jeelani, “Mechanical and Thermal

Characterization of COOH-Functionalized MWCNT Infused Epon 862

Nanocomposites,” Proceedings of the International Conference on Mechanical

Engineering (ICME 2011), Dhaka, Bangladesh.

364. Y. Zhou, M. Hosur, S. Jeelani, and S. Zainuddin, “Effect of clay on tensile, flex and

fatigue behavior of carbon fiber reinforced epoxy,” Proceedings of IMECE 20011,

2011 ASME International Mechanical Engineering Congress and Exposition,

November 11-17, 2011, Denver, Colorado, USA.

365. M. M. Rahman, S. Zainuddin, M. V. Hosur, C. J. Robertson, M.B.A. Salam, Ashok

Kumar, S. Jeelani, “Experimental Investigation of E-Glass/Epoxy Composites

Modified Using NH2 Functionalized Multi-Walled Carbon Nanotubes Through

Sonication and Calendaring Methods,” Proceedings of the SAMPE Fall Conference,

Fort Worth, TX, October 17-20, 2011.

366. M.B.A. Salam, S. Zainuddin, M. V. Hosur, M. M. Rahman, J. Holly Jr., S. Jeelani,

“Mechanical and Thermal Investigation of NH2 Functionalized Multi-Walled Carbon

Nanotube Epoxy Nanocomposites,” Proceedings of the SAMPE Fall Conference, Fort

Worth, TX, October 17-20, 2011.

367. A. Tcherbi-Narteh, M. Hosur, and S. Jeelani, “Mechanical and Thermal Properties of

Carbon/Epoxy Nanoclay Composites Exposed to Synergistic Effect of UV Radiation

and Condensation,” Proceedings of the 18th International Conference on Composite

Materials (ICCM-18), August 21-26, 2011, Jeju Islands, South Korea.

57

368. M. Harika, M. Hosur, S. Jeelani, “Studies on the Fabrication and Characterization of

Flax Fiber/Bio-Composites,” CD Proceedings of the 18th International Conference on

Composite Materials (ICCM-18), August 21-26, 2011, Jeju Islands, South Korea.

369. M. K. Hossain, M. W. Dewan, M. V. Hosur, and S. Jeelani, “Durability Study of

Nanophased Jute-Based Green Composites,” CD proceedings of the Nanotech

Conference and Expo 2011, June 13-16, 2011.

370. M. K. Hossain, C. Okoro, M. V. Hosur, S. Jeelani, and V. Rangari, “Mechanical

Characterization of XD-Grade Carbon Nanotube/Epon 862 Processed by Dual Phase

Dispersion Technique,” CD proceedings of the Nanotech Conference and Expo 2011,

June 13-16, 2011.

371. C.U. Okoro, M.K. Hossain, M. Hosur, S. Jeelani, “Mechanical and Thermal

Characterization of XD- Grade Carbon Nanotube/Epon 862 Processed by Dual Phase

Dispersion Technique,” Proceedings of the SAMPE Conference, 2011, Long Beach,

CA, May 23, 2011.

372. M.K. Hossain, M.W. Dewan, R. Carver, M. Hosur, S. Jeelani, “Thermal and

Mechanical Performance of Jute- Polyester Nanophased Biocomposites,”

Proceedings of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011.

373. M.K. Hossain, K.A. Imran, M. Hosur, S. Jeelani, “Effect of Seawater on Mechanical

Behavior of Conventional and Nanophased Carbon/Epoxy Composites,” Proceedings

of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011.

374. Alfred Tcherbi-Narteh, Mahesh Hosur and Shaik Jeelani, “Influence of Nanoclay on

the Durability of Woven Carbon/Epoxy Composites,” International Conference on

Composites for 21st Century: Current & Future Trends, Jan. 4-7, 2011, Bangalore,

India.

375. Mechanochemical Synthesis of Bio Based Calcium Silicate Nanoparticles for

Biomedical Applications, Vijaya Kumar Rangari, Boniface Tiimob, Shaik Jeelani,

MRS Fall Meeting & Exhibit, November 25 - 30, 2012, Hynes Convention Center,

Boston, MA.

376. Fabrication and Characterization of Poly (methyl methacrylate) /Bio-based

Hydroxyapatite Composites for Scaffold Applications, Vijaya Kumar Rangari,

Temesgen Samuel, Vitus Apalangya, Shaik Jeelani. MRS Fall Meeting & Exhibit,

November 25 - 30, 2012, Hynes Convention Center, Boston, MA.

377. Synthesis and Characterization of Bio-based CaCO3/Bio- plast GS 2189

Nanocomposites, T.A. Hassan, V.K. Rangari, S. Jeelani, Tuskegee University,

SAMPE-Tech 2012. Charleston Convention Center, North Charleston, South

Carolina Conference: October 22-25, 2012.

378. Bio-Based Calcium Carbonate Nanoparticles for Drug Delivery Applications, D.L.

Render, V. Rangari, S. Jeelani, T. Samuel, K. Fadlalla, Tuskegee University,

SAMPE-Tech 2012 Charleston Convention Center, North Charleston, South Carolina

Conference: October 22-25, 2012.

379. Microscopic, Thermal and Mechanical Characterization of Hybrid Nanoparticles of

SiC/SiO2 Infused Polypropylene Composites; James L. Davis, Vijaya K. Rangari and

Shaik Jeelani, Microscopy and Microanalysis, July 29-Aug2nd 2012, Phoenix, AZ.

380. Biobased Calcium Carbonate (CaCO3) Nanoparticles for Drug Delivery Applications

Diane Render, Vijaya Rangari, Khalda Fadlalla, Temesgen Samueland Shaik Jeelani

Biosensors & Bioelectronics-2012 May 14-16 Las Vegas, USA.

58

381. Synthesis of silver nanoparticles in porous activated charcoal for water purification

applications, Vitus Apalangya, Vijaya Rangari Temesgen Samuel and Shaik Jeelani,

Biosensors & Bioelectronics-2012 May 14-16 Las Vegas, USA

382. Profiling and Characterization of Silver, Zinc Oxide and Silver/ Zinc Oxide Hybrid

Nanoparticles for antimicrobial and antifungal properties, Myisha Roberson, Vijaya

Rangari, Clayton Yates, Temesgen Samuel, and Shaik Jeelani, MRS Spring, April 5-

3, 2012, San Francisco, CA.

383. PBT/BRAZILIAN Clay Nanocomposites Prepared by melt intercalation: Effect of

Organophilic clay content and Ionizing Radiation Treatment”. Mariana N. Sartori1,

Maiara S. Ferreira, Francisco R. Valenzuela Díaz, Vijaya K. Rangari, Shaik Jeelani,

Esperidiana A. B. Moura TMS 2014 143rd ANNUAL MEETING & EXHIBITION,

February 16-20, San Diego Convention Center, San Diego, California.

384. M. M. Rahman, S. Zainuddin, M. V. Hosur, J.E. Malone, Ashok Kumar, S. Jeelani,

“Optimization of low velocity impact properties of E-glass/epoxy composites using

plasticizing modifier,” ASME, International Mechanical Engineering Congress and

Exposition, November 9-15, 2012, Houston, TX

385. Mohammad K Hossain, Emory Head, Mahesh Hosur, Shaik Jeelani, Fabrication and

Characterization of Untreated, Alkali Treated, and POSS Treated Jute Fiber

Reinforced–Polylactic Acid Composites, IMECE 2012, Houston, Texas, November

9-14, 2012.

386. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “studies on cure kinetics and

UV radiation of nanoclay modified SC15 epoxy resin used in structural applications,”

SAMPE Fall Conference, October 25, 2012, Charleston, SC.

387. Eldon D. Triggs II, Alfred Tcherbi - Narteh, Mahesh V. Hosur, Shaik Jeelani, “Cure

and Thermomechanical Characterization of Partially Bio-renewable Soybean Based

Polyester Resin and Jute Fiber Laminates,” SAMPE Fall Conference, October 23,

2012, Charleston, SC.

388. M.B.A. Salam, M.V. Hosur, M. Jones, M. Fletcher, S. Jeelani, “Mechanical and

Thermomechanical Behavior of Carbon/Epoxy Composites with Carboxyl

Functionalized Multi-Walled Carbon Nanotubes,” Proceedings of the Nanocon 012,

2nd International Conference on Nanotechnology Innovative Materials, Processes,

Products and Applications, October 18-19, 2012, Pune, India.

389. Eldon D. Triggs II, Mahesh V. Hosur, Shaik Jeelani, “Jute and Flax Based

Biodegradable Composites for High Power Amateur Rocket Structural Applications,”

Proceedings of the American Society for Composites Conference, Sept. 30- Oct. 3,

2012, Arlington, TX.

390. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effects of UV Radiation On

Degradation of Material Properties of Diglycidyl Ether of Bisphenol A (DGEBA)

Epoxy Modified With Different Montmorillonite Nanoclays,” Proceedings of the

American Society for Composites Conference, Sept. 30- Oct. 3, 2012, Arlington, TX.

391. Muhammad Rahman, Mahesh Hosur, Shaik Zainuddin, Uday Vaidya, Ashok Kumar,

Jonathan Trovillion, Shaik Jeelani, “Effect of amino-functionalized MWCNTs on

high velocity impact properties of E-glass/epoxy composites,” Proceedings of the

American Society for Composites Conference, Sept. 30-Oct. 3, 2012, Arlington, TX.

392. M.M. Rahman, S. Zainuddin, M.V. Hosur, S. Jeelani, “Enhancement of Energy

Absorption Capability of GFRP Composites using Plasticizing Modifier,” CD

Proceedings of the SAMPE 2012, May 22, Baltimore, MD.

59

393. Mahesh Hosur, Mohammad Hossain, Alfred-Tcherbi Narteh, Md. Kazi Imraan, and

S. Jeelani, “Effect of Nanoclay in Reducing Environmental Degradation of

Carbon/Epoxy Nanocomposites,” Proceedings of the 33rd International Technical

Conference and Forum, SEICO 12, Paris, France, March 2012.

394. Bio-waste derived calcium silicate nanoparticles for tissue regeneration and structural

reinforcement applications. Boniface J. Tiimob, Vijaya K. Rangari, Tsemesgen

Samuel, Shaik Jeelani. Nanobio-summit, Montgomery Al, October 18, 2013.

395. Synthesis and characterization of monocalcium silicate nanoparticles from egg Shell

and the study of their biological and mechanical properties. Boniface J.Tiimob, Vijaya

K. Rangari, Tsemesgen Samuel, Shaik Jeelani Poster presented at science and

technology conference, Montgomery Al, April 5-6, 2013.

396. Preparation and Evaluation of 5-fluorouracil Drug Delivery System with Calcium

Carbonate Nanoparticles, Diane Render, Vijaya Rangari, Temesgen Samuel, Madan

Vig, Jay Ramapuram, Kasturi Pawar, and Shaik Jeelani, EPSCoR National

Conference, Nov. 4-6, 2013, Nashville, TN.

397. Electron-Beam induced cross-linking of extruded Nylon-6 nano-composite fibers:

Effect of irradiation doses and incorporated with Diamond coated Carbon Nano

Tubes and Diamond nano-particles, Muhammad A. Imam, M.G. Gomes,

Eesperidiana.A.B. Moura, Shaik Jeelani and Vijay.K. Rangari, 18th International

Conference on Surface modification materials by ion beams (SMMIB) Sept 15-20,

2013, Kusadasi, Turkey.

398. Effect of Electron-Beam Irradiation on Nylon-6/Diamond Coated CNTS Composite

Fiber, M.A. Imam, S. Jeelani,V.K. Rangari, Tuskegee University; M.G. Gomes,

E.A.B. Moura,Sampe Tec, October, 21-24, 2013 2013, Century II Convention

Center, Wichita, Kansas.

399. Synthesis of metal and metal oxide/CNTs hybrid nanoparticles and their

reinforcement in polymers, V. K Rangari, M. Ghouse, S. Dey, S. Jeelani, 19th ICCM,

July 28th -2nd August, 2013, Montreal, Canada.

400. Development of Drug Delivery System Using Biobased Calcium Carbonate

Nanoparticles, Diane Render, Vijaya Rangari, Temesgen Samuel, Madan Vig, Jay

Ramapuram, Kasturi Pawar, and Shaik Jeelani, Nanotech May 13-16, 2013,

Washington, DC

401. Synthesis of TiO2/CNTs hybrid nanoparticles and their reinforcement in Nylon-6

polymer fibres, Vijaya K. Rangari, Ghouse M Mohammad Shaik Jeelani, Spring 2013

ACS National Meeting (April 7-11, 2013), New Orleans.

402. Fabrication and characterization of biodegradable polymer/eggshell based

hydroxyapatite composite fibers for scaffold applications, V. A. Apalangya, T.

Samuel, V. K. Rangari, S. Jeelani, Emerging Researchers National (ERN) conference,

February 28 - March 2, 2013. Washington D.C April 2013.

403. Mohammad K Hossain, Md. Mahmudur R Chowdhury, Kazi A Imran, Mahmud B

Salam, Mahesh Hosur and Shaik Jeelani, “Durability Study of Low velocity Impact

Responses of Conventional and Nanophased CFRP Composites Exposed to

Seawater,” Proceeding of IMECE2013, ASME International Mechanical Engineering

Congress and Exposition, November 15-21, 2013, San Diego, CA.

404. Shaik Zainuddin, Tauhid Arefin, Mahesh Hosur, Shaik Jeelani, Ashok Kumar,

“Recovery of low-velocity impact properties of glass fiber reinforced composites

through self-healing technique,” Proceeding of IMECE2013, ASME International

60

Mechanical Engineering Congress and Exposition, November 15-21, 2013, San

Diego, CA.

405. Mahesh Hosur, Harika Maroju, Shaik Jeelani, “Influence of Alkali Treatment on

Properties of Flax Fiber Reinforced Polyester Composites,” Proceedings of the ICCM

13: International Conference on Composite Materials, Dubai, UAE, October 22-23,

2013.

406. Md. Nuruddin, Alfred Tcherbi-Narteh, Mahesh Hosur, Reaz A Chowdhury, S.

Jeelani, Peter Gichuhi, “Cellulose Microfibrils Extracted from Wheat Straw: A Novel

Approach,” SAMPE Fall Conference, October 21-24, 2013, Wichita, KS.

407. Tanjheel H. Mahdi, Md. E. Islam, Mahesh V. Hosur, Shaik Jeelani, “Low Velocity

Impact Characterization of Carbon Fiber Reinforced Epoxy Composites Modified

with Multi-Walled Carbon Nanotubes, Nanoclay and Hybrid Nanoparticles,” A Novel

Approach,” SAMPE Fall Conference, October 21-24, 2013, Wichita, KS.

408. Md Ekramul Islam, Muhammad M. Rahman, Mahesh V. Hosur, Shaik Jeelani, “Kinetics

of Degradation of Epoxy Composites Modified with Reactive Polyol Diluent And

Amino-Functionalized Multi-Walled Carbon Nanotubes,” SAMPE Fall Conference,

October 21-24, 2013, Wichita, KS.

409. S. Zainuddin, T. Arifin, F. Abdalla, M. V. Hosur, J.D. Tyson, S. Jeelani, “Mechanical

and Thermo-Mechanical Properties of Jute/Epoxy, Glass/Epoxy and Hybrid

Jute/Glass/Epoxy Composites,” SAMPE Fall Conference, October 21-24, 2013,

Wichita, KS.

410. Mohammad K. Hossain, Md. Mahmudur R. Chowdhury, Mahmud B. Salam, Mahesh

V. Hosur, Shaik Jeelani, and Nydeia Wright Bolden, “Tensile and Flexural Properties

of Woven Carbon/Epoxy-XD-CNT Nanophased Composites,” SAMPE Fall

Conference, October 21-24, 2013, Wichita, KS.

411. Mahesh Hosur, Gregory Strawder, Shaik Jeelani, “Effects of Filler Type on the

Behavior of Closed Cell Polyurethane Composite Foams and their Sandwich

Constructions,” Foams® 2013, 11th International Conference on Advances in Foam

Materials & Technology, September 11-12, 2013, Seattle, WA.

412. Alfred Tcherbi-Narteh, Mahesh Hosur, Eldon Triggs, Shaik Jeelani, “Behavior of

Partially Cured Epoxy Composites Modified With Different Amounts of

Montmorillonite Nanoclay Exposed To UV Radiation,” Proceedings of the American

Society for Composites-Twenty-Eight Technical Conference, September 9-11, 2013,

College Park, PA.

413. Eldon D. Triggs II Alfred Tcherbi-Narteh, Mahesh V. Hosur, Shaik Jeelani, “Thermo-

Mechanical Characterization of Sustainable Composites Made From Bio-Based

Polyester Resins and Nitroxide Mediated Hydroperoxide Initiators,” Proceedings of

the American Society for Composites-Twenty-Eight Technical Conference,

September 9-11, 2013, College Park, PA.

414. Mahesh Hosur, Gregory Strawder, Shaik Jeelani, “Low-Velocity Impact Response

of Sandwich Composites with FRP Facesheets and Nanoclay-Wood Flour Modified

Polyurethane Foam, The 8th Pacific Rim International Conference on Advanced

Materials and Processing, August 4-9, 2013, Waikoloa, Hawaii.

415. Eldon Triggs, Michael Wells, Mahesh Hosur, Alfred Tcherbi-Narteh, Shaik Jeelani,

“Cure and Thermo-Mechanical Characteristics of Bio-Based Polyester Composites

Using Hydroperoxide Initiators,” 19th International Conference on Composite

Materials, July 28-August 2, 2013, Montreal, Canada.

61

416. Muhammad M Rahman, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, “High

Velocity Impact Response of E-Glass/Epoxy Composites Modified With NH2-

MWCNT,” 19th International Conference on Composite Materials, July 28-August 2,

2013, Montreal, Canada

417. Mahesh Hosur, Gregory Strawder, Shaik Jeelani, “Effects of Nanoclays and Wood

Flour on the Performance of Polyurethane Foams,” 19th International Conference on

Composite Materials, July 28-August 2, 2013, Montreal, Canada.

418. A. Tcherbi-Narteh, M. Hosur, E. Triggs, S. Jeelani, “Thermal and Viscoelastic

Properties of SC-15 Epoxy Resin Composites Modified With Montmorillonite

Nanoclay Exposed To UV Radiation,” 19th International Conference on Composite

Materials, July 28-August 2, 2013, Montreal, Canada.

419. M Hosur, H Maroju, S Jeelani, “Comparative Studies on the Mechanical and Thermo-

Mechanical Performance of Flax Fiber Reinforced Polyester and Polyester-

Biopolymer Blend Resins,” Advanced Materials Research, August 2013, 747, 399-

402, edited by Narongrit Sombatsompop, Debes Bhattacharyya and Karen Hoi-Yan

Cheung, The 4th International Conference on Multi-Functional Materials and

Structures (MFMS 2013), July 14-17, 2013, Bangkok, Thailand.

420. Nusrat Jahan, Mahesh Hosur, Shaik Jeelani, “Low-Velocity Impact of Woven

Carbon/Epoxy Composites with MWCNTs,” 54th AIAA/ASME/ASCE/AHS/ ASC

Structures, Structural Dynamics, and Materials Conference, 7-11, April 2013, Boston,

MA

421. Influence of eggshell nanopowder on the tomato plant absorption of calcium toward

mitigating blossom end rot problem. Lashachiah Parks and Desmond G. Mortley,

Boniface J. Tiimob, Vijaya K. Rangari, Shaik Jeelani, George Washington Carver

Lecture Series, Tuskegee AL, 30th October, 2014.

422. Effect of eggshell nanopowder on the thermal and mechanical properties of eco-

friendly polymer matrix. Boniface J. Tiimob, Vijaya K. Rangari and Shaik Jeelani.

Nanobio Summit. The University of Alabama, Tuscaloosa AL, 23-24th October 2014.

423. Effects of the incorporation of clay on properties of the biodegradable

copolyester/PLA flexible film. Andressa Alves da Silva, Valquiria A. Silva, Boniface

Tiimob, Vijaya K. Rangari, Shaik Jeelani, Francisco R. Valenzuela-Diaz, Esperidiana

A. B. Moura, Technical contribution to the 69th ABM International Annual Congress,

Sao Paulo Brazil, 21-25th July, 2014.

424. Studies on PBT/Brazilian clay nanocomposites by melt-intercalation process -

synthesis and characterization. Andressa A. Silva, Roberta A. Lima, Boniface

Tiimob, Shaik Jeelani, Vijaya K. Rangari, Francisco R. V. Díaz, Esperidiana A. B.

Moura. Pan American Materials Conference, Sao Paulo Brazil 21-25th July 2014.

425. Graphene/Ag Hybrid Nanoparticles for Multifunctional Composite Applications with

Graphene Layered Carbon Fiber, Chinedu Okoro ,Vijaya Rangari ,Shaik Jeelani,

MRS-sprin April 21-25th 2014, San Francisco, California.

426. Effects of green calcium carbonate addition on mechanical and morphological

properties of flexible films based on biodegradable polymer” Alexandra A. R. Silva;

Valquiria A. Silva; Vijaya K. Rangari, Shaik Jeelani, Rene R. Oliveira, Francisco R.

Valenzuela-Diaz, Esperidiana A. B. Moura TMS 2014 143rd ANNUAL MEETING

& EXHIBITION, February 16-20, San Diego Convention Center, San Diego,

California.

https://mrsspring14.zerista.com/event/member/112493

https://mrsspring14.zerista.com/event/member/112493

62

427. Vijaya Rangari, Shaik Jeelani, Design, synthesis of nanoparticles and fabrication of

polymer nanocomposites, PACIFICHEM, 2015, Dec 15-20, Honolulu, Hawaii.

428. Md. Ekramul Islam, Tanjheel H. Mahdi, Mahesh V. Hosur, Shaik Jeelani,

"Characterization of Carbon Fiber Reinforced Epoxy Composites Modified with

Nanoclay and Carbon Nanotubes," 6th BSME International Conference on Thermal

Engineering (ICTE 2014), 19-21 December, 2014, Dhaka, Bangladesh.

429. Md. Nuruddin, Mahesh Hosur, Eldon Triggs, Shaik Jeelani, “Comparative Study of

Properties of Cellulose Nanofibers from Wheat Straw Obtained by Chemical and

Chemi-Mechanical Treatments,” ASME International Mechanical Engineering

Congress & Exposition, November 14-20, 2014, Montreal, Canada.

430. Peter Owuor, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Durability

Studies of Hybrid Composite of E-Glass/Carbon Fibers in Different Solvents for

Bridge Deck Panel Application,” ASME International Mechanical Engineering


431. T. H. Mahdi, M. E. Islam, M. V. Hosur, Alfred Tcherbi-Narteh, S. Jeelani,

“Characterization of Mechanical and Viscoelastic Properties of SC-15 Epoxy

Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes, Nanoclay and

Binary Nanoparticles," ASME International Mechanical Engineering Congress &

Exposition, November 14-20, 2014, Montreal, Canada.

432. Md. Ekramul Islam, Tanjheel H. Mahdi, Mahesh V Hosur, Alfred Tcherbi-Narteh,

Shaik Jeelani, “Low Velocity Impact Characterization of Nanoclay and MWCNTs

Binary Nanoparticles modified Carbon/Epoxy Composites Subjected to Marine

Environmental Conditioning,” ASME International Mechanical Engineering


433. T. H. Mahdi, M. E. Islam, M. V. Hosur, S. Jeelani, “Characterization of Mechanical

and Viscoelastic Properties of Carbon Fiber Reinforced Epoxy Composites Modified

with Multi-walled Carbon Nanotubes, Nanoclay and Hybrid Nanoparticles,”

Composites and Advanced Materials Expo (CAMX), Orlando, FL October 13-16,

2014.

434. Md. Nuruddin, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effect of

Chemical treatments on Morphology, Crystalline and Thermal properties of Kenaf

Fiber,” Composites and Advanced Materials Expo (CAMX), Orlando, FL October

13-16, 2014.

435. T. H. Mahdi, M. E. Islam, M. V. Hosur, S. Jeelani, “Synergistic Effects of Nanoclay

and MWCNTs on the Performance of Epoxy and Carbon Fiber Reinforced Epoxy

Composites,” Nanotechnology-Smart Materials, Composites, Applications and New

Innovations, 3rd International Conference, NANOCON 014, 14-15, October 2014,

Pune, India

436. Shaik Zainuddin, Mahesh Hosur, Chuckwuma Nweke, David Price, Shaik Jeelani,

Ashok Kumar, “Durability of glass/epoxy nanocomposites subjected to synergistic

elevated temperature and moisture conditions,” American Society for Composites

29th Technical Conference, 16th US-Japan Conference on Composite Materials &

ASTM-D30 Meeting, September 8-10, 2014, University of California San Diego, La

Jolla, CA USA.

437. Eldon D. Triggs II, Mahesh Hosur, Shaik Jeelani, “Comparative Life Cycle Analysis

of Tung Oil/Jute Fiber Bio-Composites to Synthetic Unsaturated Polyester Resins/E-

glass Composites,” American Society for Composites 29th Technical Conference,

63

16th US-Japan Conference on Composite Materials & ASTM-D30 Meeting,

September 8-10, 2014, University of California San Diego, La Jolla, CA USA.

438. Md. Nuruddin, T. H. Mahdi, M. V. Hosur, S. Jeelani, “Mechanical and Thermal

Properties of Cellulose Nanofibers Reinforced Epoxy Polymer Nanocomposites,”

American Society for Composites 29th Technical Conference, 16th US-Japan

Conference on Composite Materials & ASTM-D30 Meeting, September 8-10, 2014,

University of California San Diego, La Jolla, CA USA.

439. Md. Ekramul Islam, Tanjheel H. Mahdi, Mahesh V Hosur, Alfred Tcherbi-Narteh,

Shaik Jeelani, “Comparison of Low Velocity Impact Properties of MMT, MWCNT

and MMT/MWCNT Hybrid Nanoparticles modified Carbon/Epoxy Composites

Subjected to Marine Environmental Conditioning,” American Society for Composites

29th Technical Conference, 16th US-Japan Conference on Composite Materials &

ASTM-D30 Meeting, September 8-10, 2014, University of California San Diego, La

Jolla, CA USA.

440. T. H. Mahdi, M. E. Islam, M. V. Hosur, S. Jeelani, "Evaluation of Fatigue Properties

of Carbon Fiber Reinforced Epoxy Composites Modified with Nanoclay," First World

Conference on Fracture and Damage Mechanics: Metals, Glass, Ceramics, Semi-

conductors, Polymers, Alloys, Composites, Nanocomposites, Gels, and Adhesives

(FRACTURE 2014): August 9- 11, 2014 at Mahatma Gandhi University, Kottayam,

Kerala, India.

441. Shaik Zainuddin, Abdullah Fahim, Tauhid Arefin, Mahesh Hosur, Shaik Jeelani,

“Mechanical performance of jute/epoxy, glass/epoxy and hybrid jute/glass/epoxy

composites,” Proceeding of SAMPE 2014, Seattle, June 2-5, 2014.

442. Abdullah Fahim, Shaik Zainuddin, Ema K. Masuma, Jeremiah Tyson, Mahesh V.

Hosur, Shaik Jeelani, “Morphological, Thermal and Tensile Properties of Halloysite

Nanotubes Filled Poly Hydroxybutyrate-co-Hydroxyvalerate (PHBV)

Nanocomposites,” Proceeding of SAMPE 2014, Seattle, June 2-5, 2014.

443. Shaik Zainuddin, Masuma Ema, Price David, Mahesh Hosur, Shaik Jeelani, “Flexure,

Thermomechanical and Thermal Properties of Epon Composites Using Bentonite

Nanoclay,” Proceeding of SAMPE 2014, Seattle, June 2-5, 2014.

444. Boniface Tiimob, Vijaya Rangari, Shaik Jeelani, Lashachiah Parks, Desmond George

Mortley. Influence of Eggshell Nanopowder on Calcium Uptake in Tomato. American

Society of Horticulture Science (ASHA), New Orleans LA, 6th

August, 2015.

445. Synthesis of Graphenenanoplates from organoclay templates and their reinforcement

in thermoset polymer, Vijaya K Rangari, Emanuel Akugre, and Shaik Jeelani, ICCM-

20 July 19-24, 2015, Copenhegan, Denmark.

446. Investigation on Mechanical and Thermal Behaviours of Copolyester/pla blend

reinforced with TiO2 nanoparticle, Roberta Lima, Andressa Silva, Vijaya Rangari,

Shaik Jeelani , Esperidiana Moura, 2015 TMS Annual Meeting & Exhibition, March

15-19 2015, Walt Disney world Orelando, Fl, USA.

447. Development of functional nanomaterials from waste avian eggshells. Boniface J.

Tiimob, Vijaya K. Rangari, and Shaik Jeelani. Emerging Researchers National

Conference, Washington DC, 19-21st February 2015.

448. Aliphatic-aromatic copolyester/PLA biodegradable binary polymer blends for

potential packaging applications. Boniface J. Tiimob, Vijaya K. Rangari and Shaik

Jeelani, Science and technology open house, Montgomery AL, 30-31th January 2015.

64

449. Shatori Meadows, Alfred Tcherbi-Narteh, Mahesh Hosur, and Shaik Jeelani, “Kinetic

Analysis of Different Peroxide Initiators on the Cure Behavior of Biobased and

Recycled Unsaturated Polyester Envirez Resins,” Proceedings of The Composites and

Advanced Materials Expo (CAMX 2015), October 26-29, 2015, Dallas, Texas, USA.

450. Md Nuruddin, Raju Gupta, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani,

“Preparation of poly(L-lactide )/Poly(methyl methacrylate) polymer blend: A Novel

Approach,” Proceedings of The Composites and Advanced Materials Expo (CAMX

2015), October 26-29, 2015, Dallas, Texas, USA.

451. Md Nuruddin, James McKee, Alfred Tcherbi-Narteh, Raju Gupta, Mahesh Hosur,

Shaik Jeelani, “Flexure and Impact Behavior of E-glass/Carbon Hybrid Fiber

Reinforced Epoxy Polymer Composite,” Proceedings of The Composites and

Advanced Materials Expo (CAMX 2015), October 26-29, 2015, Dallas, Texas, USA.

452. Dereca Hubbard, Md. Nuruddin, Alfred Tcherbi-Narteh, Mahesh Hosur, and Shaik

Jeelani, “Synthesis and Characterization of Novel Phenolic Resin System Based on

Lignin Extracted From Different Biomass Resources,” Proceedings of The

Composites and Advanced Materials Expo (CAMX 2015), October 26-29, 2015,

Dallas, Texas, USA.

453. Mahesh Hosur, Tanjheel Mahdi, Md. Ekramul Islam, Alfred Tcerbi-Narteh, Shaik

Jeelani, “Fabrication and Performance of Carbon/Epoxy Composites With Hybrid of

Nanoclay and MWCNTS,” 20th International Conference on Composites Materials

(ICCM-20), Copenhagen, Denmark, July 22, 2015.

454. Alfred Tcherbi-Narteh, Md. Nuruddin, Mahesh Hosur, Raju Gupta, Allyson

Lattimore, and Shaik Jeelani “Influence of Montmorillonite Nanoclay, Graphene

Nanoplatelets and Combined Nanoclay/Graphene Hybrid on Properties of Epoxy

Composite,” 20th International Conference on Composites Materials (ICCM-20),

Copenhagen, Denmark, July 23, 2015.

455. Nano-engineered eggshell toughened polylactic acid/aliphatic-aromatic copolyester

flexible polymer blend, Boniface Tiimob, Vijaya Rangari, and Shaik Jeelani, ACS

251th meeting at San Diego, CA, March 14th-18th. 2016.

456. Vijay Rangari, Vitus Apalangya, Shaik Jeelani; Tiimob Boniface, Samuel Temesgen,

Fabrication of Polymer/Bio-based Hydroxyapatite Composite Electrospunn Fibers

for Scaffold Applications, (Oral)TMS-2016, Feb 14-18, 145th Annual Meeting and

Exhibition at Nashville TN,

457. Boniface J.Tiimob, Shaik Jeelani and Vijaya K. Rangari, Nano Eggshell Toughened

Polylactic Acid/Aliphatic‐aromatic Copolyester Flexible Biodegradable Blend. ERN-

Conference in STEM, Washington DC, 25-27th

February 2016.

458. Boniface J.Tiimob, Shaik Jeelani and Vijaya K. Rangari. Effect of reinforcement of

eggshell based nanopowder on biodegradable flexible polymer blends. Emerging

Researchers National Conference, Washington DC, 25-27th

February 2016.

459. Azizi Turner, Boniface J. Tiimob, Shaik Jeelani, Vijaya K. Rangari. Nano eggshell

tailored polyurethane foam composites for structural material design. Emerging

Researchers National Conference, Washington DC, 25-27th, February 2016.

460. Marilyn H. Creer, Boniface Tiimob, Shaik Jeelani, Vijaya Rangari. Effect of bagasse

filler nanoparticles on the thermomechanical properties of bio-based epoxy system.

Emerging Researchers National Conference, Washington DC, 19-21st February 2015;

25-27th, 2016.

65

461. Farooq Syed, Shaik Zainuddin, Amari carter, Mackenzie Matthews, Mahesh Hosur,

Shaik Jeelani, “Single-walled carbon nanotube added epon 862 nanocomposites:

Investigating the crosslinking behavior and interfacial properties through molecular

dynamic simulations,” SAMPE, Long Beach, CA, May 23-26, 2016.

462. Shaik Zainuddin, Abdullah Fahim, Shaik Shoieb, Mahesh V. Hosur, Dawen Li,

Brittany Terry, Shaik Jeelani, “Jute nanobiocomposites reinforced with grafted

halloysite nanotubes added PHBV polymer,” SAMPE, Long Beach, CA, May 23-26,

2016.

463. Chukwuma E. Nweke, Shaik Zainuddin, Mahesh Hosur, Vincent Hollowman, Shaik

Jeelani, “Processing and characterization of CNT/core shell siloxane modified high

temperature bismaleimide polymeric composites,” SAMPE, Long Beach, CA, May

23-26, 2016.

464. Vertonica Powell-Rose, Mahesh Hosur, Shaik Jeelani, Influence of Nanoclay on

Curing, Mechanical and Thermal Properties of Bio-Based Epoxy Resin System,

CAMX, The Composites and Advanced materials Expo, September 26-29, 2016,

Anaheim, CA.

465. M. Hosur, T. Mahdi, E. Islam, S. Jeelani, Flexural, thermomechanical and low-

velocity impact studies of CFRP composites with nanoclay and multiwalled carbon

nanotubes, American Society for Composites 31st Technical Conference and ASTM

Committee D30 Meeting, September 19-22, 2016, Williamsburg, VA.

466. Conversion of Egg and Seashell Waste into a Printable Biomaterial for Dental Tissue

Engineering Scaffolds, V. Hembrick-Holloman, S. Jeelani

and V. Rangari Nov 9-10,

2017, 5th Nanobiosumit-2017.

467. Fabrication of Polycarbonate-Silica Polymer Nanocomposites Layer by Layer

Through 3D Printing, Chibu O. Umerah, Mohanad Idrees, Vijaya K. Rangari, Shaik

Jeelani, Nov 9-10, 2017,5th Nanobiosumit-2017.

468. Eggshell-silver nanoparticles reinforcement in polymer films and their applications,

Boniface J. Tiimob, Shaik Jeelani, Vijaya K. Rangari, ICCM-21, Xian, China, August

20th -26th 2017.

469. Highly Porous Carbon Nanoparticles from Recycled Waste Papers for Water

Filtration applications, Manik Biswas, Vijay Rangari and Shaik Jeelani, SAMPE–

Seattle May 22nd -25th, 2017.

470. Synthesis of Porous Carbon from waste Peanut Hull by pyrolysis, Alayna Huckleby,

Shaik Jeelani and Vijaya Rangari, 2017 Emerging Researchers National

(ERN) Conference in STEM on March 2-4, 2017.

471. Conversion of Egg and Sea Shell Waste into a Valuable Nanomaterial for Tissue

Engineering, Vincent Hembrick-Holloman, Vijay Rangari, Shaik Jeelani,

2017 Emerging Researchers National (ERN) Conference in STEM on March 2-4,

2017.

472. Studying the Bioactivity of Tissue Engineering Scaffolds Derived from Egg and Sea

Shell Waste Using SEM, EDS, & TEM, V Hembrick-Holloman, VK Rangari, T

Samuel, S Jeelani, Microscopy and Microanalysis 25 (S2), 1058-1059.

473. Shaik Zainuddin, Chukwuma E. Nweke, Mahesh Hosur, Vincent Hollowman, Shaik

Jeelani, “Effect of Core Shell Siloxane/Carbon Nanotubes Modifiers on the

Mechanical and Thermal Performance of Bismaleimide Nanocomposites,” CAMX,

The Composites and Advanced materials Expo, December 11-14, 2017, Orlando, FL.

66

474. Alfred Tcherbi-Narteh, Delroy Watson, Shatori Meadows, Lenore S. Miller, Shavette

Thompson, Mohammad Zaheeruddin, Mahesh Hosur, and Shaik Jeelani,

“Interactions between Different Nanoparticles used as Binary Reinforcements in

Polymer Nanocomposites,” Proceedings of the American Society for Composites

32nd Technical Conference, October 22-25, 2017, West Lafayette, IN.

475. Mahesh Hosur, Md. Nuruddin, Dereca Hubbard, Alfred Tcherbi-Narteh, Shaik

Jeelani, “Extraction of cellulose and lignin from biomass and their use in reinforcing

polymers and synthesis of phenolic resins,” The 21st International Conference on

Composites Materials (ICCM-21), August 20-25, 2017, Xi'an, China.

476. Alfred Tcherbi-Narteh, Delroy Watson, Mohammad Zaheeruddin, Donnell Tobias,

Mahesh Hosur, Shaik Jeelani, “Studies on Nanocomposites Reinforced with

Nanoclay and Graphene Nanoplatelets, and Hybrid Composites with Glass and

Carbon Fabric Reinforcements,” The 21st International Conference on Composites

Materials (ICCM-21), August 20-25, 2017, Xi'an, China.

477. Shatori Meadows, Mahesh Hosur, Alfred Tcherbi-Narteh, Shaik Jeelani,

“Optimization Studies on the Synthesis and Characterization of Bio-based Epoxidized

Soybean Oil (ESBO),” The 21st International Conference on Composites Materials

(ICCM-21), August 20-25, 2017, Xi'an, China.

478. Development of 3D printing of Polycarbonate/Silica polymer Nanocomposites,

Chibu O. Umerah, Mohanad O. Idrees, Shaik Jeelani, Vijaya K. Rangari, SAMPE,

May, 21-24, 2018, Long Beach, CA.

479. Synthesis and characterization of highly porous carbon from waste packaging

material for value added, Vijay Rangari, Mohanad Idrees and Shaik Jeelani, March

11-15, 2018 TMS Annual Meeting & Exhibition, Phoenix, AR.

480. Mahesh Hosur, Tanjheel Mahdi, Ekramul Islam, Shaik Jeelani, “Nanoparticle

incorporation in thermoset polymers to enhance the performance of fiber reinforced

composites,” proceedings of the Nanocon 018, nanotechnology – Applications,

Advances and Innovations, Pune, India, 25-26, October, 2018.

481. Mahesh Hosur, Alfred Tcherbi-Narteh, Delroy Watson, Mohamed Zaheeruddin,

Kristoff McIntosh, Shaik Jeelani, “Polymeric Nanocomposites With Binary

Nanoparticles Reinforcements and Hybrid Composites for Marine Applications,

ECCM 18-18th European Conference on Composite Materials, Athens Greece, 22-

24th June 2018.

482. Alfred Tcherbi-Narteh, Delroy Watson, Zaheeruddin Mohammad, Tobias Donnell,

Mahesh Hosur and Shaik Jeelani, "Properties of Carbon, E-glass and Hybrid E-

glass/Carbon Fiber Reinforced Polymer Composites Exposed to Seawater

Conditioning," SAMPE 2018 Conference and Exhibition, May 21-24, 2018, Long

Beach, CA.

483. Synthesis of Biochar and 3D Printing of Sustainable Biochar Recycled PET

Composite: Vijaya Rangari, Mohanad Idrees, Shaik Jeelani, TMS, March 10-14th

2019, San Antonio, TX.

484. SEM/EDS as a Tool to Investigate Pyrolysis Induced Transformations in Chicken

Feather Fibers, Z Mohammed, S Jeelani, V Rangari, Microscopy and Microanalysis

25 (S2), 1112-1113.

485. Surface Modification of Bio Derived Carbon with Low Temperature Plasma

Treatment for Polymer Composite Filler Applications, Vijaya Rangari, Zaheeruddin

Mohammed, Shaik Jeelani, TMS conference San Diago, Feb 23-27, 2020.

67

Technical Reports

1. “Power Accelerator System for Axial Impact Studies”, Report No. 69-3, February

1969 for the Department for the US Navy Office of Naval Research.No.

N00014-68-0187

2. “Design and Performance of Power Accelerator Systems for Impact Studies”,

Technical Report No. 71-2 for the US Navy Office of Naval Research. No. N00014-

68-0197.

3. “Two State Light-Gas Gun Installation for Hyper-Velocity Impact Studies”, Report

No. 73-3 for the US Navy Office of Naval Research. Ministry of Defense, Contract

No. N00014-0197.

4. “Surface Integrity in the Machining of Certain High Strength Materials Part II

(Measurement of Residual Stress),”

5. Surface and Sub-Surface Damage in the Machining of 18% Nickel Maraging

Steel, 6242Titanium Alloy and Red Brass” For the National Science Foundation,

Grant GH-33761.

6. “Prediction of Cumulative Fatigue Damage”. Report No. TI-NAVY-1 for the

Department of the US Navy, Naval Air Systems Command. Contract No. N00019-

78-0034.

7. “Investigation of Cumulative Fatigue Damage for Selected Materials”, Report No. TI-

NAVY-2 for the Department of the US Navy, Naval Air Systems Command,

Contract No. N00019-80-c-0564.

8. “A Study of Cumulative Fatigue Damage in 2024-T4 Aluminum Alloy”. Report

No. TI-NAVY-3 for the Department of the US Navy, Naval Air Systems Command.


9. “A Study of Cumulative Fatigue Damage in 2011-T3 Aluminum Alloy”. Report

No. TI-NAVY-4 for the Department of the US Navy, Naval Air Systems Command.


10. “Investigation of Cumulative Fatigue Damage for Selected Materials”, Report No. TI-

NAVY-5 October 1983 for the Department of the US Navy, Naval Air

Systems Command, Contract No. N00019-82-c-0316.

11. “Effect of Cutting Conditions on Fatigue Life of 2024-T351 Aluminum Alloy”,

Report No. TI-NAVY-6 December 1983 for the Department of the US Navy, Naval

Air Systems Command, Contract No. N00019-82-c-0316.

12. “Characterization of High-Cycle Fatigue Behavior of Selected materials (Titanium

6A1-4V and AISI 4130 Steel) for NASA-MSFC, under grant No. NAG 8-20.13.

“Design of a Sub-Sized Fatigue Specimen”, for NASA-MSFC, under grant No.

NAG8-20.

13. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”, for

NASA-MSFC, under Grant No. NGT-01-005-751.

14. “A New Technique of Fatigue Life Prediction”. Report for NASA-MSFC, Under

Grant No. NAG-068, April 1988.

15. “Manufacture and Characterization of SiC/SiC Composites”, TU-ONR/URI-1,

(September 15, 1986 – September 30, 1987).


(October 1, 1987 – September 30, 1988).

17. Hygrothermal Influence on Flexural Properties o Kevlar 49-Graphite/Epoxy Hybrid

68

Composites”, TU-ONR/URI-2/E (October 1, 1987-September 30, 1988.)

18. Hygrothermal Influence on Inter-laminar Shear Strength of Kevlar 49-

Graphite/Epoxy Hybrid Composites”, TU-ONR/URI-2/F (October 1, 1987-

September 30, 1988.)


(October 1, 1988 – September 30, 1989).

20. “Moisture and Temperature Induced Degradation in Tensile Properties of Kevlar-

Graphite/Epoxy Hybrid Composites”, TU-ONR/URI-3/B

21. “Characterization of Ceramic/Ceramic Composites”, TU-ONR/URI-3/C. (October 1,

1988-September 30, 1989.)

22. Characterization of Ceramic/Ceramic Composites”, TU-ONR/URI-4 23. “Effects of

Reinforcement Geometry on the Mechanical Properties of SiCw/A1203 Composites”,

TU-ONR/URI-4E.

23. “High Temperature Characterization of SiCw/SiC Composites and Prediction of

Flexural Properties by Energy Method”, TU-ONR/URI-5A.

24. “Compressive Response of Thermoplastic Composites by Layered Shell Elements”,

ALCOA Foundation, Pittsburgh, Pennsylvania.

25. Mechanical Property Characterization of Refractory Composites”, National

Aerospace Plane/Joint Program Office (NASP/JPO), WPAFB, OH.

26. An Investigation of the Effects of Environment and Compression on the Response of

Carbon/Peek Thermoplastic Composites”, NASA Marshall Space Flight Center,

Huntsville, AL.

27. Mechanical Property Testing of Resin Transfer Molded Materials”, McDonnel

Douglas Missile Systems, St. Louis, Missouri.

28. Reverse Fatigue of RTM Composites”, 3M Corporation, St. Paul, Minnesota.

29. “Effect of Stress Ratio on the Fatigue Damage in C/C Composites”, Strategic

Defense Command (SDC), US Army, Huntsville, Alabama.

30. “High Temperature Fatigue of Continuous Fiber Reinforced Silicon Carbide/Silicon

Nitride Composites”, National Science Foundation (NSF), Washington, DC 20550.

31. “Survivability of Affordable Aircraft Composite structures” Interim Progress Report,

April 2001, Air force Research laboratory, Grant No. F33615-99-C-3608.

32. “Dynamic Characterization of Graphite/Epoxy Composite Laminate Under

Inplane Compression, Single and Double Lap Shear Loading at Subzero, Room

and Elevated temperatures”, Interim Progress Report, September 2001, U.S.

Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039.

33. “Survivability of Affordable Aircraft Composite Structures” Interim Progress Report,

October 2001, Air force Research Laboratory, Grant No. F33615-99-C-3608.

34. “Dynamic Characterization of Graphite/Epoxy Composite Laminate Under Inplane

Compression, Single and Double Lap Shear Loading at Subzero, Room and

Elevated temperatures”, Interim Progress Report, January 2002, U.S. Army Cold

Regions Research Laboratory, Grant No. DACA42-01-C-0039.

35. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under In-plane

Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated

temperatures,” Interim Progress Report, March 2002, U.S. Army Cold Regions

Research Laboratory, Grant No. DACA42-01-C-0039.

36. “Dynamic Characterization of Graphite/Epoxy Composite Laminate under Inplane


69

Elevated Temperatures”, Interim Progress Report, June 2002, U.S. Army Cold



April 2002, Air force Research laboratory, Grant No. F33615-99-C-3608.


September 2002, Air force Research laboratory, Grant No. F33615-99-C-3608.

39. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under Inplane


temperatures,” Interim Progress Report, September 2002, U.S. Army Cold Regions




Elevated temperatures,” Interim Progress Report, December 2002, U.S. Army Cold




Elevated temperatures,” Interim Progress Report, March 2003, U.S. Army Cold


42. “Survivability of Affordable Aircraft Composite structures” Final Technical Report,

April 2003, AFRL-VA-WP-TR-2003-3071, Vol. 1: Overview, Manufacturing of

Affordable Composites and Ballistic Impact Testing.


April 2003, AFRL-VA-WP-TR-2003-3072, Vol. 2: High Strain Rate

Characterization of Affordable Composites.


April 2003, AFRL-VA-WP-TR-2003-3073, Vol. 3: Studies on the Low-Velocity

Impact Response of Woven Composites.



temperatures,” Interim Progress Report, June 2003, U.S. Army Cold Regions


46. “Dynamic Characterization of Graphite/Epoxy Composite Laminates Under Inplane

Compression, Punch Shear and Transverse Loading, Volume I: Overview and High

Strain Rate Characterization,” Final Technical Report, October 2003, U.S. Army Cold


47. “Dynamic Characterization of Graphite/Epoxy Composite Laminates Under Inplane

Compression, Punch Shear and Transverse Loading, Volume II: Transverse Loading

of Adhesively Bonded Composite Structures: Analysis and Experimentation,” Final

Technical Report, October 2003, U.S. Army Cold Regions Research Laboratory,

Grant No. DACA42-01-C-0039. Honors and Award

1. Global Messenger Award presented by Southeastern Consortium for Minorities in

Engineering (SECME), 2001

2. Outstanding Contribution Award by the National Association of Minority Program

Administrators (NAMEP A), 1996

70

3. Exxon Foundation Faculty Development Award for Outstanding Research, 1984.

4. Outstanding Teacher from ME Department, 1978-1979

5. Outstanding Teacher from School of Engineering, 1977-1978


7. Faculty Achievement Award, 1977

8. Outstanding Teacher from School of Engineering, 1977

9. UNCF Professor of the Year, 1976

10. Tuskegee Teacher of the Year, 1976


Professional and Scientific Societies 1. Registered Professional Engineering in the State of Alabama, (Alabama PE#1197)

Member, American Society of Mechanical Engineers (ASME)

2. Member, American Society of Engineering Education, (ASEE)

3. Member, Society of Experimental Stress Analysis (SESA)

4. Member, American Ceramic Society

5. Member, Sigma XI

6. Member, Pi Tau Sigma Honor Society

7. Secretary of Chattahoochee Sub-Section of ASME, 1984-1985

8. Vice President of Chattahoochee Sub Section of ASME, 1985-1986

9. Secretary of Chattahoochee Sub-Section of ASME, 1986-1987, 1987-1988

10. Member, American Ceramic Society

K-12 Initiatives

Dr. Jeelani was responsible (1980-1996) for writing proposals and raising approximately

$600,000 each year and conducting recruitment and retention programs in the School of

Engineering and Architecture at Tuskegee University. Most significant one was the $2.25

million grant from the DOD/ ARO grant for the period 1993-1998.

Tuskegee University is well known for its innovative K-12 programs- all designed and

implemented by Dr. Jeelani, during his tenure as a faculty member and Associate Dean of

Engineering and Architecture. These programs have become effective mechanisms to

identify, motivate and recruit students for academic programs in science and engineering.

The programs are briefly described below.

Saturday Academy

The program was offered for 8th through l2th graders attending Schools in Macon County,

Alabama, throughout the academic year to strengthen their background in Mathematics,

Physics, Chemistry, Biology and Physical Science, so that they could qualify for admission

in science and engineering curricula at the college level. Approximately l00 students were

served, each year.

71

Pre-Freshman Enrichment Program (PREP-8, PREP-9 and PREP-10)

These were six-week summer programs for students completing their 8th

, 9th

, and 10th

grades, respectively. PREP consisted of instruction in Mathematics, Biology, Chemistry,

Physics and Computer Programming. Laboratory sessions were designed to provide

students with experience in experimentation, report writing and problem solving. Field trips

were arranged for the students’ professional development. Approximately 75 students were

served, each summer.

Minority Introduction to Engineering (MITE)

MITE was a one to two week summer program designed to expose high school juniors/rising

seniors to various aspect of engineering and college life. The main features of the program

were lectures on engineering by faculty and engineering alumni, laboratory demonstrations,

seminars, field trips and picnics. The program was offered at no cost to the students, except

their transportation to and from Tuskegee. Approximately 60 students were served

through MITE, each summer.

Research Apprenticeship for Disadvantaged High Schoolers (RADHS)

RADHS was a summer program designed to provide high school juniors/rising seniors

the opportunity for “hands on” laboratory experience under the supervision of research

faculty. The students were also provided instruction in Computer Programming, Computer

Aided Design, Technical Writing and basic skills in research. Seminars, guest lectures, field

trips and career counseling were some additional features of RADHS. The students were

provided a stipend at a rate of minimum wage for the entire duration of the program.

Approximately 20 students were involved in RAHDS, each summer.

Freshmen Accelerated Start-Up and Training for Retention in Engineering Curricula

(FASTREC)

FASTREC was an eight-week summer program offered at Tuskegee every year for high

school graduates who were about to enter college. In the FASTREC program students

pursued an intensive program of study in English, Mathematics and Engineering Graphics

or Computer programming. Up to ten semesters credit hours were be earned towards the

B.S. Degree in Engineering. The students also attended guest lectures, seminars, field trips

and picnics. The program was at no cost to the student. Non- commuting students were

required to stay in the campus dormitory. Approximately 100 students participated in

FASTREC, each summer.

MITE, RADHS and FASTREC are still offered at Tuskegee University. At least 90% of the

FASTREC participants enter science and engineering programs at Tuskegee University.

Scholarship and Mentoring Program

Dr. Jeelani has developed and implemented an impressive scholarship and mentoring

program with support from the industry and the national labs. Corporations and foundations

such as Boeing, Ford Foundation, GEM, General Electric, General Motors, NACME, Proctor

and Gamble and Raytheon provide scholarship and mentoring support for students. Students

are selected for these scholarships based on merit and need. Scholarship recipients are also

assigned the responsibility of tutoring and mentoring their juniors and serving as big brothers

72

and big sisters. Dr. Jeelani has authored several educational partnership agreements (EPA)

with corporations and national labs. These EPAs include scholarships, support with

academic preparation, internships and mentoring. Two EPAs, Tuskegee-Raytheon and

Tuskegee-AFML (Air Force Materials Laboratory), are being replicated at other institutions.

Documents

Shaik Jeelani, Ph.D., P.E. - Tuskegee University...Co-PI with Dr. Mahesh Hosur 57. “A Partnership for Innovations in Nano Composites Technology,” National Science Foundation, ($600,000,