Setting Coin Counts

Coin Machine

• If you have a 7 formula machine made after about 2000 and your processor card looks similar to this, then use this procedure.

• If you have a Single Formula machine with either the coin dip switch on the processor card or on a separate coin card use this procedure.

Determine Type of Machine

How Do I?

• Set my Coin Requirements1 Setting for Formula 12 Setting for Formula 23 Setting for Formula 34 Setting for Formula 45 Setting for Formula 56 Setting for Formula 67 Setting for Formula 78 Flash ROM

A--Switches 3 and 5 are ON = 11 Quarters

B--Switches 2 and 5 are ON = 13 Quarters

Set the DIP switches when the machine power is OFF

How Do I?

• Set my Coin Requirements

The table does not show all possible combinations of switch positions. Determine the number of coins you desire and then determine the combination of switch positions that will add to that number of coins.

EXAMPLE: Desire 13 Coins for a formula.Position 4 is 8 coins, Position 3 is 4 coins, and Position 1 is 1 Coin. 8+4+1=13 coins

10Coins

Set the DIP switches when the machine power is OFF