View
232
Download
3
Tags:
Embed Size (px)
Citation preview
April 04, 2002 Agilent Restricted
Building a Sequence for Automated Analysis
1. Go to the Method and Run Control view.
2. From the Sequence menu, select New Sequence.
3. Edit the Sequence Parameters.
4. Edit the Sequence Table.
5. Select a Sequence Output.
6. Save the Sequence
7. Run the Sequence form the RunControl menu or the Sequence Table.
April 04, 2002 Agilent Restricted
Standard ALS Sequence Table
Additional Columns inSequence Tables:
• Sample Amount• ISTD Amount• Multiplier• Dilution • Data file• Inj Volume
April 04, 2002 Agilent Restricted
WPS Sequence table
The set up sequence starts with well plate 1 at location A1 to B4 and ends on plate 2 where samples from B5 to G10 are analyzed.
Sample table set up screen
Next Previous Text Home
April 04, 2002 Agilent Restricted
Fill in Sequence Table Using Sequence Table Fill Down - Standard ALS
1. Insert Values2. Apply
April 04, 2002 Agilent Restricted
WPS Sequence table
The set up sequence starts with well plate 1 at location A1 to B4 and ends on plate 2 where samples from B5 to G10 are analyzed.
Sample table set up screen
Next Previous Text Home
April 04, 2002 Agilent Restricted
Sequence Data Files
Format for Automatic Injection: 003-0101003 Vial Number01 Sequence Line01 Replicate
PrefixPrefix01Prefix02, etc. for a total of 8 characters
April 04, 2002 Agilent Restricted
Sequence Sampling Diagram
Shows sequence tray set-up and sequenceprocessing status. Click to set-up sequence.
Standard ALS
Wellplate Sampler