Selftestengine..599-01.68Questins - gratisexam.com · Section: (none) Explanation Explanation/Reference: QUESTION 2 If performing a disaster recovery (DR) test, what commands …

http://www.gratisexam.com/

Selftestengine..599-01.68Questins

Number: 599-01Passing Score: 800Time Limit: 120 minFile Version: 6.1


599-01Riverbed Certified Solutions Professional - Storage Delivery Exam

A) I wanted to thank this Great VCE file for helping me to achieve success in test with remarkable scores 92%.B) You can use it to study but don't forget to train and train and train again or your efforts will be useless.C) From my understanding it's valid ALL Over the World.D) It really looks fresh and updated. Questions cover all the new areas of new exam pattern.E) I think This VCe is a ray of hope to pass the exam in first attempt with great scores.F) It contains all the tricky questions, which really helpful to succeed.


Exam A

QUESTION 1Match the slot to the type of add in card that is appropriate for each slot:

Select and Place:



Correct Answer:



Section: (none)Explanation

Explanation/Reference:

QUESTION 2If performing a disaster recovery (DR) test, what commands and in what order do they need to be run?

Select and Place:

Correct Answer:




QUESTION 3On a Granite Edge, which is used to store transient data, per example, no requirement to replicate back to the data center?

A. ESXi partitionB. VSP partitionC. Local LUND. Pinned LUN

Correct Answer: CSection: (none)Explanation



QUESTION 4-- Exhibit


-- Exhibit --

Refer to the exhibit. Customer is attempting to implement the following Granite Design, but for some reason the Windows Server in the Branch never manages todiscover a LUN. Which of the following Granite configuration steps that they implemented would cause the problem? (Assume the basic networking is correct)

Step A. Granite Edge is configured to add the Granite Core. Step B. Granite Core discovers Granite Edge and ISCSI SAN. Step C. ISCSI San Administrator mapsLUN to Granite Core. Step D. Granite Core discovers LUN and projects it to Granite Edge. Step E. Granite Edge maps LUN to iqn.1998-01.com.vmware:Windows_Server. Step F. Windows Server connects to 172.1.1.1 via ISCSI client.

A. Step AB. Step BC. Step CD. Step DE. Step EF. Step F

Correct Answer: ESection: (none)Explanation


QUESTION 5Which mechanisms can cause Whitewater appliance replication to pause or effect the optimization service? (Select 4)


A. Cloud provider outage.B. Backup application crash.C. WAN outage.D. Whitewater bandwidth settings.E. Incorrect cloud provider credentials.


Correct Answer: ACDESection: (none)Explanation


QUESTION 6Which transmission protocols do Whitewater appliances support? (Select 2)

A. iSCSIB. NDMPC. NFSD. OSTE. SMB/CIFS

Correct Answer: CESection: (none)Explanation


QUESTION 7Which three cloud providers are currently supported with Whitewater appliances? (Select 3)

A. IBM SmartCloud.B. Microsoft Windows Azure.C. Amazon Glacier.D. Cloudian.E. Rackspace.

Correct Answer: BCESection: (none)Explanation

Explanation/Reference:fine answer.


QUESTION 8Whitewater appliance peer replication is supported in which of the following modes? (Select 2)

A. Single active/single passive (cloud only).B. Single active/single passive (secondary Whitewater appliance only).C. Single active/dual passive (cloud and secondary Whitewater appliance).D. Single active/dual active (cloud and secondary Whitewater appliance in high availability mode).

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:valid answer.

QUESTION 9Which VIF configurations does the Whitewater appliance support? (Select 3)

A. Round robinB. 801a.dC. 802.3adD. Transmit/receive load balanceE. Transmit load balanceF. Receive load balance

Correct Answer: CDESection: (none)Explanation

Explanation/Reference:elaborated.

QUESTION 10An environment has 5TB of file server data and 5TB of database data backed up with a full backup each week. Assume the average dedupe rates for Whitewater,and assume standard 1% change and 10% annual growth rate. With a requirement to keep a minimum of two weeks of backups locally on the Whitewater cache,which Whitewater appliances would satisfy the requirements above? (Select 2)

A. Virtual Whitewater appliance 210.


B. Virtual Whitewater appliance 410.C. Whitewater appliance 730.D. Whitewater appliance 2030.E. Whitewater appliance 3030.

Correct Answer: DESection: (none)Explanation

Explanation/Reference:actual answer.

QUESTION 11Which port is used for management information between the Granite Edge and Granite Core?

A. 7770B. 7970C. 7950D. 7750E. 7951

Correct Answer: BSection: (none)Explanation

Explanation/Reference:excellent answer.

QUESTION 12Which of the following storage array features does Granite appliance allow customers to take advantage of in their branch offices? (Select 2)

A. DeduplicationB. Extends data center thin provisioningC. Backup and restore

Correct Answer: ABSection: (none)Explanation


Explanation/Reference:actual answer.

QUESTION 13Which block store encryption options are supported on a Granite Edge? (Select 2)

A. DESB. SSLv3C. AES 64D. AES 192E. AES 256

Correct Answer: DESection: (none)Explanation


QUESTION 14The term for "fixing" a LUN's blocks in blockstore so that they may not be ejected via LRU is:

A. PinningB. PrepopC. SnapshotD. Online

Correct Answer: ASection: (none)Explanation

Explanation/Reference:real answer.

QUESTION 15Which Granite appliance feature would be used to implement disconnected operations? (Select2)


A. PinningB. OffliningC. High availabilityD. MPIOE. Prepopulation

Correct Answer: AESection: (none)Explanation


QUESTION 16What are the default ports used between the Granite Edge and Granite Core on a Steelhead EX platform?

A. 7150-7154, 7170B. 7950-7954, 7970C. Granite uses the same default ports as the Steelhead WAN OptimizationD. 7750-7754, 7770E. 7050-7050, 7070


Explanation/Reference:true answer.

QUESTION 17In a solution where Granite appliance is providing projected LUNs to the branch office the Granite Edge is considered what?

A. ESXi server and LUNB. MPIO initiatorC. iSCSI targetD. iSCSI initiator

Correct Answer: C




QUESTION 18When configuring high availability for Granite Edge, which of the following is true?

A. MPIO is enabled on a Steelhead EX appliance to achieve high availability.B. A pair of Steelhead CX appliances act as active/standby peers.C. Granite Edge does not support high availability.D. A pair of Steelhead EX appliances act as active/active peers.E. A pair of Steelhead EX appliances act as active/standby peers.


Explanation/Reference:sophisticated answer.

QUESTION 19What is the maximum number of bytes recommended for iSCSI traffic for jumbo frames in the Granite Core configuration due to performance restrictions?

A. 1500B. 1600C. 4000D. 8000E. 9000


Explanation/Reference:given answer is right.

QUESTION 20


What RAID levels are recommended/used with virtual and physical Whitewater appliances?

A. RAID0 for virtual Whitewater appliance, RAID5 for physical Whitewater appliance.B. RAID1 for virtual Whitewater appliance, RAID5 for physical Whitewater appliance.C. RAID0 for virtual Whitewater appliance, RAID6 for physical Whitewater appliance.D. RAID1 for virtual Whitewater appliance, RAID6 for physical Whitewater appliance.E. RAID10 for virtual Whitewater appliance, RAID10 for physical Whitewater appliance.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:true answer.

QUESTION 21If a user is considering having backup data sent to Amazon Glacier, select which recommendations should be reviewed to ensure Whitewater appliance isappropriately designed for the environment? (Select 2)

A. Whitewater appliances should be sized larger to reduce the amount of potential access activity from Amazon Glacier.B. Whitewater appliances should only deduplicate against local cache storage and not against local and Amazon Glacier storage.C. Whitewater appliances should only accept archive data if using Amazon Glacier storage.


Explanation/Reference:valuable answer.

QUESTION 22Which versions of SMB and NFS protocols are supported with Whitewater appliances?

A. SMBv2 and NFSv2B. SMBv2 and NFSv3C. SMBv3 and NFSv2D. SMBv3 and NFSv3

Correct Answer: B



Explanation/Reference:precious answer.

QUESTION 23If implementing a virtual Whitewater appliance v210 or higher to support a greater then 2TB volume for cache, which version of ESXi and storage type should beused?

A. ESXi 4.x and VMDK volumes.B. ESXi 4.x and spanned VMDK volumes.C. ESXi 5.x and VMDK volumes.D. ESXi 5.x and RAW volumes.E. ESXi 5.x and spanned VMDK volumes.


Explanation/Reference:definite answer.

QUESTION 24What is the maximum recommended number of initial backup jobs (streams) that each Whitewater appliance data interface should be configured with?

A. 3B. 4C. 5D. 6E. 7F. 10


Explanation/Reference:perfect answer.


QUESTION 25When configuring your backup software to utilize a Whitewater appliance, what possible target must the backup software be able to write to? (Select 2)

A. Virtual tape libraryB. NFSC. CIFSD. iSCSI targetE. Physical tape library

Correct Answer: BCSection: (none)Explanation

Explanation/Reference:rightful.

QUESTION 26If a Backup Exec server is going to maximize throughput to a physical Whitewater appliance, how many backup to disk folders (or storage targets) should becreated on Backup Exec server?

A. 1B. 2C. 3D. 4E. 5F. 6


Explanation/Reference:exact answer.

QUESTION 27How much additional cloud capacity (beyond the license stated amount) is granted by a license before Whitewater appliances begin to fail writes?

A. 5%


B. 10%C. 15%D. 20%



QUESTION 28How long can the battery backup unit run before needing to be put into a relearn cycle?

A. 21 daysB. 28 daysC. 30 daysD. 45 daysE. 60 days



QUESTION 29If Amazon Glacier is used for cloud storage, which default deduplication mode will the Whitewater appliance use?

A. Deduplicate against cloud and local contents.B. Deduplicate against cloud contents only.C. Deduplicate against local contents only.




QUESTION 30If a Virtual Whitewater appliance datastore disk is undersized relative to the cloud license applied, what happens?

A. The Virtual Whitewater appliance system fails to boot.B. The Virtual Whitewater appliance system boots, but the optimization service does not start.C. The Virtual Whitewater appliance system boots, but triggers a critical alarm.D. The Virtual Whitewater appliance system boots, but triggers a degraded alarm.E. The Virtual Whitewater appliance system deletes the offending cloud license.



QUESTION 31What is the minimum size of the data store disk for the Virtual Whitewater appliance?

A. 5% of the cloud license capacity.B. 10% of the cloud license capacity.C. 15% of the cloud license capacity.D. 20% of the cloud license capacity.E. 25% of the cloud license capacity.


Explanation/Reference:authenticate.

QUESTION 32Which of the following is an iSCSI-compliant SAN technology with snapshot integration that has been qualified with Granite appliance?

A. EMC VMAX 5876B. Dell FAS270


C. NetApp FAS270D. Hitachi PS4000E. IBM XIV 3000



QUESTION 33A crash-consistent snapshot leaves the LUN in the same state as: (Select 2)

A. Warm bootB. Cold rebootC. Hard resetD. Logout



QUESTION 34If performing a disaster recovery (DR), what commands and in what order do they need to be run?

Select and Place:


Correct Answer:




QUESTION 35From the list below, what would be the Whitewater appliance correct order steps for disaster recovery (DR)?

Select and Place:


Correct Answer:




QUESTION 36If performing a disaster recovery (DR) test, what commands and in what order do they need to be run?

Select and Place:


Correct Answer:




QUESTION 37What is the port range for block reads on an optimized Granite Edge appliance to core connection(s)?

A. 7952-7954B. 7950-7954C. 7954-7970D. 8000-8080




QUESTION 38What file systems would most benefit on pinning a LUN? (Select 2)

A. NTFS formatted LUN.


B. EXT3 formatted LUN.C. FAT32 formatted LUN.D. VMFS 3 formatted LUN.



QUESTION 39The Riverbed hardware snapshot provider will run on which of the following operating systems? (Choose 2)

A. Redhat LinuxB. Windows 2008 R2C. Windows 2003D. Windows 2008E. SUSE Enterprise

Correct Answer: BDSection: (none)Explanation



QUESTION 40Which acceptable ways Whitewater appliances can be expanded to hold additional storage? (Select 2)

A. Use external USB drives connected to the rear USB ports of Whitewater appliance.B. Add an additional (up to 2) shelf to the Whitewater appliance head unit.C. Adjust the data store disk size on the virtual Whitewater VM (within the ESXi host) while the virtual Whitewater appliance VM is offline.D. Connect a 3rd party SAS drive array shelf to the Whitewater appliance head unit.



QUESTION 41What is the minimum number of CPUs and memory required when deploying a Virtual Whitewater appliance?

A. 2 CPUs/6 GBB. 4 CPUs/8 GBC. 2 CPUs/8 GBD. 4 CPUs/4 GB



QUESTION 42Please select the correct best practices for Whitewater appliance deployment below? (Select 4)

A. A Whitewater appliance gateway CIFS folder should only receive backups from one backup server.B. A pair of Whitewater appliances should be configured as active/standby peers.C. Backups pointed to a Whitewater appliance should always be unencrypted and uncompressed.D. Whitewater appliances should always be deployed in pairs.


E. 32-bit or 64-bit capable CPU for virtual Whitewater appliance.

Correct Answer: ABCDSection: (none)Explanation


QUESTION 43Before installing a Whitewater appliance 2030 into production, you need to work out the approximate amount of time it's going to take to "seed" the cloud, todetermine whether the current internet link is appropriate. Some stats around the seeding requirement:Full backup: 10 TB Bandwidth to the Internet: 50 Mb/s first pass deduplication ratio reported by Whitewater appliance during POC: 4x

How long will it take (assuming you have the full bandwidth available)?

A. 3.3 minutesB. 26.6 minutesC. 27.7 hoursD. 111.1 hoursE. 444.4 hours



QUESTION 44How long can the battery backup unit run before needing to be put into a relearn cycle?

A. 21 daysB. 28 daysC. 30 daysD. 45 daysE. 60 days

Correct Answer: B




QUESTION 45What are the two steps needed for peer replication configuration? (Select 2)

A. Configure role, password, and secondary Whitewater IP on the primary Whitewater appliance.B. Configure role, password, and megastore ID on the primary Whitewater appliance.C. Configure role, password, and primary Whitewater IP on the secondary Whitewater appliance.D. Configure role, password, and megastore ID on the secondary Whitewater appliance.

Correct Answer: ADSection: (none)Explanation


QUESTION 46On a NetApp Filer, which of the following licenses are required to integrate the FAS appliance with Granite appliance (including VSS consistent Snapshotfunctionality)? (Select 2)

A. SnapMirror LicenseB. FlexClone LicenseC. SnapDrive LicenseD. iSCSI LicenseE. SnapVault LicenseF. Snapshot License

Correct Answer: BDSection: (none)Explanation



QUESTION 47Which of the following CLI commands would you run on a Windows Host (which has the RHSP plugin installed) to take an application consistent snapshot ofGranite appliance attached LUN?

A. snapB. diskshadowC. snapshotD. vssE. volume



QUESTION 48Granite high availability is typically combined with what other high availability services or protocols? (Select 2)

A. MPIOB. Redundant WAN linksC. EtherChannelD. HSRPE. PBR


Explanation/Reference:appropriate answer.

QUESTION 49After connecting a Granite Core appliance to a Granite Edge appliance, all Granite appliances configurations are completed at:

A. The EdgeB. The Core


C. The arrayD. The server



QUESTION 50What information is needed to configure a Granite Edge in the Granite Core?

A. Granite Edge Identifier.B. IP address of the Granite Edge.C. Primary IP address of the Granite Edge.D. Granite Edge IQN (iSCSI Qualified Name).E. In-path IP address of Granite Edge.


Explanation/Reference:proper answer.

QUESTION 51The Riverbed hardware snapshot provider enables what?

A. Multipath I/OB. Application-consistent snapshotsC. Crash-consistent snapshotsD. Storage array snapshots




QUESTION 52What are three available disk management modes for the Granite Edge? (Select 3)

A. Granite storage mode.B. Granite standalone mode.C. VSP standalone storage mode.D. VSP and local LUN mode.E. VSP and Granite storage mode.

Correct Answer: ACESection: (none)Explanation


QUESTION 53The delay between taking a snapshot at the edge and flushing the snapshot to the storage array is called what?

A. Snapshot TargetB. Snapshot LagC. Snapshot WindowD. Snapshot Integration



QUESTION 54What are two optional Windows server plugins utilities for branch offices using Granite appliance?

A. DFS and VSS.B. VSS and Turbo Boot.C. IPCFG and Diskshadow.


D. RHSP and Turbo Boot.E. iSCSI Initiator and iSCSI target.



QUESTION 55Which are some best practices for Granite appliance implementations? (Select 4)

A. Deploy Granite Core appliance on GigE network when possible.B. Configure jumbo frames in your network infrastructure.C. Segregate storage traffic from management traffic.D. Recommend mutual CHAP authentication when possible.E. Must use separate IP addresses for primary, aux. and eth0_x ports.

Correct Answer: ABCDSection: (none)Explanation


QUESTION 56A Whitewater appliance v.3.0 can be upgraded from which previous versions of Whitewater operating system (WWOS)? (Select 3)

A. WWOS v1.xB. WWOS v2.0C. WWOS v2.1D. WWOS v2.1.1

Correct Answer: BCDSection: (none)Explanation



good answer.

QUESTION 57If the following system log messages occur during cloud storage provider configuration on Whitewater appliance, select the actions below that can be taken todiagnose the causE. (Select5)

Riverbed rfsd[29622]: [retry.ERR] (29625) failed request 0 of get_buckets after receiving 1032:"1032: There was a mismatch between the signature in the request and the signature computed by the server.", status=access denied Riverbed rfsd[29622]:[replicator.ERR] (29625) Failed to list buckets : access denied Riverbed rfsd[29622]: [rfsd.ERR] (29625) Cloud test faileD. access denied Riverbed rfsd[29622]:[rfsd.ERR] (29625) Cloud test failed

A. Reboot the Whitewater appliance and see if the error resolves itself.B. Restart the Whitewater appliance storage optimization service and see if the error resolves itself.C. Verify the cloud storage provider credentials within Whitewater appliance.D. Verify the cloud storage provider credentials outside of Whitewater appliance.E. Take a TCP trace.F. Check the Whitewater appliance system date/time.

Correct Answer: BCDEFSection: (none)Explanation

Explanation/Reference:Answer: B, C, D, E, F

QUESTION 58Utilizing Granite appliance allows customers to: (Select 2)

A. Remove storage from the branch.B. Centralize backups.C. Collaborate on shared files across the whole network.D. Accelerate centralized file servers.




QUESTION 59What is the default write reserve percentage of blockstore size?

A. 5%B. 10%C. 25%D. 30%



QUESTION 60Some users at a specific branch have been reporting that occasionally when accessing their local file server (which is being presented out through Graniteappliance onto ESXi), it is continually hanging when attempting to access certain files, which eventually reports "File does not exist". Other users at the samebranch are reporting everything is working perfectly for them. What is the most likely problem?

A. The SAN array is having communications issues with the Granite appliance Core.B. The Granite appliance Core is having communications issues with the Granite appliance Edge.C. ESXi is having issues communicating to the Granite appliance Edge.D. ESXi is having issues communicating to the Granite appliance Core.E. The Steelhead appliance is not optimizing the Granite appliance traffic.



QUESTION 61What feature should be used to increase the performance of a Windows server booting on a Granite appliance LUN that is not pinned and prepopulated? (Select 3)

A. RHSP Riverbed Hardware Server Process.


B. Steelhead Granite Application Acceleration.C. Riverbed Turbo Boot.D. High Speed TCP Options for Granite.E. Local LUN on Granite Edge.

Correct Answer: CDESection: (none)Explanation

Explanation/Reference:nice answer.

QUESTION 62Which operating system below supports Riverbed Turbo Boot?

A. Windows XP.B. Windows 2003.C. Windows Server 2003.D. Windows Server 2008 r2.E. Windows Server 2003 r2.



QUESTION 63-- Exhibit


-- Exhibit --

Refer to the exhibit. Which interface should be used for the Granite Edge connection?

A. Aux PortB. Eth0_1C. Eth0_2D. Primary PortE. Eth0_3




QUESTION 64Associate each interface on the correct place on the diagram below based on their function on the Granite Core appliance:

Select and Place:

Correct Answer:




QUESTION 65From the list below, use the available text boxes to correctly order the minimum steps needed to get a Virtual Whitewater installed and ready to backup data to acloud provider:

Select and Place:


Correct Answer:





QUESTION 66From the list below, identify the 3 needed steps (in order) to configure peer monitoring for Whitewater appliance:

Select and Place:

Correct Answer:




QUESTION 67If a backup application server fails to send data to a Whitewater CIFS share, what are the 6 applicable troubleshooting techniques from the list below we can use toidentify the cause of the failure? (Match the troubleshooting techniques to the action provided spaces)

Select and Place:


Correct Answer:





QUESTION 68How many upgrade parts that are added to the following Whitewater appliances head units support a shelf unit?

Select and Place:

Correct Answer:





Documents

Selftestengine..599-01.68Questins - gratisexam.com · Section: (none) Explanation Explanation/Reference: QUESTION 2 If performing a disaster recovery (DR) test, what commands …