The professional’s answer to reliable floor preparation.www.probondproducts.com S

EL

EC

TO

R G

UID

E

SERIES SERIES SERIES

SERIES SERIES SERIES

SERIES SERIES SERIES

DPM and Primer – the added reassurance of a perfect finish

Levelling Compounds – making it simple to find the ideal solution

Adhesives – permanent & peelable for vinyl, carpet tiles, capping, coving and skirting

Getting the perfect floor the first time is all about the process. PROBOND® Series 200, 300, and 400 gives you a comprehensive and complete system to subfloor preparation and covering application, as well as total peace of mind.

The www.probondproducts.com website gives you advice on which products are ideal for your requirements.

We show the complete system of PROBOND® products available to you and include a simple to use calculator to make your job even easier.

We are adding new products all the time, so visit the site to view our latest range additions.

Coverage1 litre + 3 litres water = 40m2

Drying TimeAbsorbent surfaces = 30-60mins

Coverage1kg = 15-20m2

Drying TimeNon-absorbent 3-6 hours

The importance of a good Primer

• Improves adhesion of levelling compounds to subfloors

• Maximises levelling compound flow and strength development

• Helps control absorbency, bond strength and drying rate of flooring adhesives

• Significantly reduces shrinkage

• Improves resistance to water, shock, frost and chemical damage

We are able to recommend PROBOND® PR260 for all of the following substrates:

Anhydrite ScreedsConcreteElectric Underfloor HeatingExisting Ceramic TilesExisting Natural Stone TilesExisting Porcelain TilesExisting Vinyl TilesFibre Cement SheetFibreglassFloating Floors

Floor Grade Asphalt & BitumenGreen ScreedPlywood OverlaySand/Cement ScreedSteel / Metal SurfacesT&G FloorboardsTile Backer BoardsWet System Underfloor Heating

PROBOND® PR260 All Purpose Primer is an acrylic primer (Styrene Butadiene) making it a perfect one-part primer for use on porous and difficult substrates prior to tiling or screeding. It also seals gypsum plasters and screeds prior to the addition of cement-based products. It is coloured green for easy identification.

PROBOND® PR220 is an excellent Primer for non-porous surfaces. 1x 5Kg tub covers up to 100m2.

• Coloured orange, for ease of application

• Wide range of substrates

• Excellent adhesion

• Easy to use 2 part mixing system

When you need a DPMInstalling a DPM is an essential element, as it acts as a barrier to prevent damp rising up through the substrate, from the ground below. PROBOND® PR298 works as a DPM where a structural damp proof membrane is not present or is defective, or where the residual moisture content is up to 98% RH. After curing, the membrane produced can accommodate 98% (Relative Humidity) RH on cement screeds and 87% RH on anhydrite / calcium sulphate screeds without any bond strength issues.

PROBOND® PR298 is structured to resist water, grease, oil, dilute mineral and organic acids. It is a two-part, solvent free, epoxy damp proof membrane. It is a one-coat system, however if a structural membrane is not present PROBOND® PR298 should be applied as a 2-coat system.

COVERAGE

95-98% RH One coat. Uniform pin-hole finish. Maximum coverage rate of 22m2

Below 95% RH One coat. Uniform pin-hole finish. Maximum coverage rate of 25m2

Up to 87% RH (An-hydrite / Calcium Sulphate)

One coat. Uniform pin-hole finish. Maximum coverage rate of 22m2

Structural Damp Proof Membrane not present

Two coats. Apply both coats to a coverage of 18-22m² per 10kg. Coverage depends on type of substrate and porosity. Let the first coat cure before applying the second.

A fast curing system, PROBOND® PR298 cures in 4-5 hours. Within 24 hours of PROBOND® PR298 being applied, PROBOND® FL390 and FL301 can be applied directly to the surface without the need to prime.

If 24 hours has elapsed, or other products (instead of FL390 or FL301) are used (such as PROBOND® FL325, FL307 or FL330) within 24 hours, the surface must be primed with one coat of PROBOND® PR260.

If the DPM is tacky, it is not fully cured and additional time should be left for curing.

Help in choosing the right Levelling CompoundThere is without doubt a wide choice of options available and advice should be taken if a specialist compound may be required. To choose the right type of floor levelling compound, it is necessary to consider the difference in levels needed for a particular floor, compatibility with the type of substrate, the area of work and the necessary timeframe of the job.

Your Easy ChecklistUse this simple checklist to determine which levelling compound gives you the perfect solution.

Questions that help you decide The PROBOND® Series product that meets this requirement. List Products:

My floor substrate is:

The floor level varies from:

I need a slower drying time or fastest on this project:

If more than 1 option still remains, consider greatest coverage and if a bag and bottle is better than a water-based product – i.e. general site restrictions / requirements:

Don’t forget to see our website for a great calculator on how many bags of levelling compound you need.

We recommend priming for FL307, FL325 and FL330. For FL390 and FL301 priming is essential for surface types highlighted (p).

Always check datasheets for more information.

Fast Setting Flexible

2 Part Multi-Purpose

2 Part Rapid Setting High Performance

Fine Flow Smooth

Super-Fast 2 Part High

PerformancePatch Repair Feather Edge

SURFACE TYPE FL 307 FL 325 FL 390 FL330 FL301 FL 315Adhesive Residue (Existing) ✘ ✘ ✓ ✘ ✓

Chipboard Overlay - Min 18mm

Concrete

Existing Floor Tiles

Existing Vinyl Tiles

Fibre Cement Sheet

Floating Floors

Floor Grade Asphalt

Floor Grade Bitumen

Plywood Overlay - Min 6mm

Sand/Cement Screed

T & G Floorboards

Tile Backer Boards

Below DPM (Moisture Tolerant) ✘ ✘ ✓ ✘ ✓

Ceramic Tiles ✓ ✓ ✓ ✓ ✓

Concrete ✓ ✓ ✓ ✓ ✓

Epoxy DPM ✘ ✘ ✓ ✓ ✓

Fibreglass ✓ ✘ ✓(p) ✘ ✓(p)

Floating Floors ✓* ✘ ✘ ✘ ✘

Floor Grade Asphalt ✓ ✓ ✓ ✘ ✓

Floor Grade Bitumen ✓ ✓ ✓ ✘ ✓

Green Screed ✘ ✘ ✓ ✘ ✓

Metal Surfaces ✓ ✘ ✓(p) ✘ ✓

Natural Stone Tiles ✓ ✓ ✓ ✓ ✓

Plywood Overlay Min 6mm Min 15mm Min 6mm ✘ Min 6mm

Porcelain ✓ ✓ ✓ ✓ ✓

Sand/Cement Screed ✓ ✓ ✓ ✓ ✓

Tile Backer Boards ✓ ✓ ✓ ✘ ✓

Tongue & Groove Boards Min 4mm ✘ ✘ ✘ ✘

Underfloor Heating ✓ ✓ ✓ ✓ ✓

Vinyl Tiles ✓ ✓ ✓ ✓ ✓

1. Levelling Compound Selector – check your substrate options

2. Levelling Compound Selector - compare performance with your requirements

Patch Repair Feather Edge

Super-Fast 2 Part High Performance Fast Setting Flexible 2 Part Multi-

Purpose2 Part Rapid Setting High Performance Fine Flow Smooth

FL 315 FL 301 FL 307 FL 325 FL 390 FL330

Apply From 0 – 3mm (12mm Max. successive coats) 2 – 15mm 2 – 50mm 2 – 12mm 2 – 12mm Feather – 20mm

Working Time 10-15 mins 10-15 mins 20-30 mins 20-25 mins 20-25 mins 20-30 mins

Foot Traffic 15 mins 30 mins 3 hrs Foot Traffic 2 hrs Foot Traffic 90 mins Foot Traffic 3 hrs Foot Traffic

Cover Ready 15 mins 90 mins, Ceramic 45-60 mins

Tile 3 hrs Resilient Flooring

24hrs

Tile 4hrs, Resilient Flooring

12hrs

Tile 3hrs, Resilient Flooring

4hrs

Tile 3hrs, Resilient Flooring

24hrs

Flexural Strength 6N/mm2

at 28 days6N/mm2

at 28 days6N/mm2

at 28 days6N/mm2

at 28 days7N/mm2

at 28 days7N/mm2

at 28 days

Compressive Strength n/a 16N/mm2

at 28 days25N/mm2

at 28 days20N/mm2

at 28 days16N/mm2

at 28 days30N/mm2

at 28 days

Approximate Coverage 11kg = 50m2 at 1mm

20kg = 4.2m2 at 3mm

20kg = 4.2m2 at 3mm

20kg = 5m2 at 3mm

20kg = 5m2 at 3mm

20kg = 4.2m2 at 3mm

Application Temperature +5ºC to + 30ºC

Know your levelling compounds and looking for a particular benefit?When all levelling compounds are right for the job, consider what benefits make the job easier for you

– the PROBOND® 300 Series has it covered.

* See selector guide for substrates that require priming. Note: in some cases priming will be required.

FEATURES BENEFITS BEST SOLUTION

Doesn’t require a Primer* When speed and simplicity is important

Rapid Setting When a fast walk on time is required

Levels to a Depth over 30mm For vastly uneven floors

Extra Fine and Fast Flowing Ideal for sheet vinyl / no rubbing down

2 Part Solution When no water is on site

For patch repair and feather finish Need a fast setting solution

PROBOND® B400 PROBOND® B420 PROBOND® B421 PROBOND® B430 PROBOND® B460 PROBOND® B460 PROBOND® B443 PROBOND® B446 PROBOND® B490

Vinyl Adhesive Carpet Tile Tackifier Carpet Tile Tackifier All Purpose Adhesive Premium Contact Spray Adhesive

Premium Contact Spray Adhesive Vinyl Adhesive Premium Pressure

Sensitive Adhesive Grab Adhesive

Permanent Peelable Peelable Permanent Permanent Permanent Permanent Permanent PermanentPRODUCTS INCLUDEBitumen Carpet Tiles ✓ ✓ ✓ ✓ ✓ Stair Nosings

Gripper

Metal Trims

Coving

Skirting

Capping

Capping, Coving & Skirting ✓ ✓Foam & Gel Backed Carpet Tiles some ✓ ✓ ✓ ✓ ✓PVC Backed Carpet Tiles most most ✓ ✓ ✓Rubber Flooring ✓ ✓ ✓ ✓Sheet Flooring ✓ ✓ ✓ ✓ ✓ ✓Vinyl Tiles ✓ ✓ ✓ ✓ ✓ ✓Looselay Vinyl Tiles/Planks ✓Linoleum Sheets ✓

SUBSTRATES INCLUDEConcrete ✓ ✓ ✓ ✓ ✓ ✓ ✓Most Metal ✓ ✓ ✓ ✓Plywood ✓ ✓ ✓ ✓ ✓ ✓ ✓Sand / Cement ✓ ✓ ✓ ✓ ✓ ✓Most Stone ✓ ✓ ✓ ✓ ✓ ✓ ✓Existing Resilient Flooring ✓

A range of Adhesives for Floor Coverings & Finishing TouchesThe PROBOND® 400 series is a comprehensive set of adhesives in a wide range of application formats to meet the demands of any flooring job. Whether you need to adhere vinyl or carpet tiles across a large floor expanse or simply have a convenient spray to hand for finishing touches, we offer the perfect solution.

Always evaluate the adhesives performance in application conditions before commercial use, subject to manufacturer’s recommendations.

Below is a guide, see packaging for more details.

PROBOND® B400 PROBOND® B420 PROBOND® B421 PROBOND® B430 PROBOND® B460 PROBOND® B460 PROBOND® B443 PROBOND® B446 PROBOND® B490

Vinyl Adhesive Carpet Tile Tackifier Carpet Tile Tackifier All Purpose Adhesive Premium Contact Spray Adhesive

Premium Contact Spray Adhesive Vinyl Adhesive Premium Pressure

Sensitive Adhesive Grab Adhesive

Permanent Peelable Peelable Permanent Permanent Permanent Permanent Permanent PermanentPRODUCTS INCLUDEBitumen Carpet Tiles ✓ ✓ ✓ ✓ ✓ Stair Nosings

Gripper

Metal Trims

Coving

Skirting

Capping

Capping, Coving & Skirting ✓ ✓Foam & Gel Backed Carpet Tiles some ✓ ✓ ✓ ✓ ✓PVC Backed Carpet Tiles most most ✓ ✓ ✓Rubber Flooring ✓ ✓ ✓ ✓Sheet Flooring ✓ ✓ ✓ ✓ ✓ ✓Vinyl Tiles ✓ ✓ ✓ ✓ ✓ ✓Looselay Vinyl Tiles/Planks ✓Linoleum Sheets ✓

SUBSTRATES INCLUDEConcrete ✓ ✓ ✓ ✓ ✓ ✓ ✓Most Metal ✓ ✓ ✓ ✓Plywood ✓ ✓ ✓ ✓ ✓ ✓ ✓Sand / Cement ✓ ✓ ✓ ✓ ✓ ✓Most Stone ✓ ✓ ✓ ✓ ✓ ✓ ✓Existing Resilient Flooring ✓

WWW.PROBONDPRODUCTS.COM

MIDLANDS

SOUTH

NORTH

DISTRIBUTED NATIONALLY ACROSS THE UK

SASGO Ltd.sales@sasgo.co.uk

LangleyT: 01753 597 750

LeedsT: 0113 243 2131

GlenrothesT: 01592 809 900