SEE PAGE 4 SEE PAGES 10 & 11 SEE PAGES 14 -19 · latest materials and technologies available in the UK. Discover innovations designed to streamline your daily processes and enhance

In partnership with Co-located with

REGISTER FOR DTS 2015 NOWRegister online at www.the-dts.co.uk/showtime or call + 44 (0)20 7013 4981

SEE PAGE 4

LECTURE THEATRE PROGRAMME

SEE PAGES 10 & 11

DTS 2015 FLOOR PLAN & EXHIBITOR LIST

SEE PAGES 14 -19

PRODUCTS & SERVICES GUIDE

Among the many highlights will be the impressive trade floor, offering free access to over 100 leading lab-dedicated manufacturers and suppliers from the UK and abroad. These will include some of the biggest names in the industry today including 3M ESPE, 3Shape, Schottlander, Metrodent, Cendres+Métaux, Ivoclar Vivadent, GSK, Henry Schein, Nobel Biocare, Sirona, GC UK, Bracon, and Straumann.

Following global product launches at IDS Cologne, the new and exciting Launchpad UK will present your first chance to see the very latest materials and technologies available in the UK. Discover innovations designed to streamline your daily processes and enhance the quality of

products created, ensuring the utmost satisfaction from both your clients and their patients.

The trade floor will also be the perfect place to network, enabling you to create and develop the widespread professional relationships you need to promote and grow your business. With The Dentistry Show running alongside DTS once again, and more than 7,500 delegates expected, there will even more networking opportunities than ever before.

For those looking to update, refresh and advance their knowledge and skills across a wide range of technical and business areas, the two-day educational programme won’t disappoint. National and international professionals will share their extensive knowledge, including Steve Taylor, John Wibberley, Jonathan Bill, Sascha Hein, Vanik Jinoian, Xabier Egurbide and Peter Fairbairn, speaking throughout the

Lecture Theatre, Practical Theatre and ADI Implant Theatre. Bringing you and your team to the very cutting-edge of the industry, sessions will offer up to 10 hours of vCPD and cover everything from implant-retained dentures to occlusion, all ceramic restorations and bio-emulation.

DTS is also opening a brand new CAD/CAM Theatre, providing insight into the best technologies currently available. Sessions will be led by leading suppliers such as 3Shape, Nobel Biocare and BEGO with experts offering guidance on the endless possibilities achievable when digital technologies are fully utilised.

Comments from DTS 2014 visitors included:

“We have thoroughly enjoyed the lectures… such good content for free.” Vivienne Smith, Hospital Dental Technician.

“You always learn something when you come to the DTS.” Martin Ellis, Laboratory Owner/ Dental Technician, West Sussex

“My team came to DTS to look at what is happening with CAD/CAM and digital impressions to see how much it is taking off because it is set to revolutionise everything.” Ian Hammerton, Laboratory Owner, Hinckley

As the Dental Laboratory Association’s (DLA) flagship event, DTS 2015 will share your passion for high quality dentistry, offering numerous ways for you and your team to enhance your technical work and build your business. With world-class education and training, CPD, networking and the chance to attend the prestigious Dental Awards 2015, there really is something for everyone.

The Dental Technology Showcase 2015 -

IT’S SHOWTIME

Presenting first-class education, an outstanding speaker line-up, the very latest innovations and a buzzing atmosphere, the Dental Technology Showcase (DTS) 2015 is almost here!

Chairman of the educational programme at the Dental Technology Showcase (DTS) 2015 will be CDT Steve Taylor DipPS ( Implantology), Fellow of the British Institute of Dental & Surgical Te c h n o l o g i s t s (BIDST) and owner of Taylor Dental Technology Centre in Leyland. With more than 25 years’ of experience to draw on, Steve understands the demands placed on modern technicians and laboratory owners, and will be helping to shape the 2015 lecture programme to suit your needs.

Steve provides a taster of what delegates can expect:

“It was an honour to be asked to Chair the educational programme for DTS 2015,” he says. “DTS is a great event because it is designed specifically for the modern dental technician and lab owner. Lectures and practical demonstrations have always been informative and relevant – the programme is created by and delivered by technicians, for technicians. There is always a pearl of wisdom to be had!

“For 2015, we are hoping to build on the success of previous years, presenting a programme that is as informative and up-to-date as possible. An effective blend of topics will be covered, from implants to crown and bridge work, dentures and orthodontic appliances, ensuring there is something for everyone.”

AT THE FOREFRONT OF DENTAL TECHNOLOGy

Steve Taylor

Continued on page 2...

In partnership with: Official media partner: Supported by: Sponsored by:

www.the-dts.co.uk2 www.the-dts.co.uk 3

www.the-dts.co.uk17th & 18th April 2015NEC BirminghamFind us on stand 115

At the forefront of the quality and technology expected in today’s ever

evolving Laboratory market.

So call today on: 01580 817000 or email: [email protected]

Proud to represent some of the best quality manufacturers from around the world!

Bracon Ltd

SUA2367 April 2015 Show Ad 261x178_FINAL.indd 1 10/03/2015 09:20

30°

2005ATLANTIS ISUS is introduced

Angulations up to 30 degrees

ATLANTIS ISUS implant connections sold globally

>500,000

Compatible implant connections

290The proof is in the numbers. Delivering the best patient-specific suprastructures requires restorative versatility, workflow efficiency and flexibility, and design options that are as individual as each patient. ATLANTIS™ ISUS provides you with all this, plus:

• Suprastructures compatible with all major implant systems• Savings on labour and materials• Rapid turnaround - deliveries in one week• 24/7 online processing via ATLANTIS WebOrder• Optimal positioning of screw access hole• Simplified restorative procedure with reduced chairtime

for clinicians

Beyond CAD/CAM

Don’t forget we’re exhibiting at DTS -

visit us at stand 130

www.dentsplyimplants.co.uk [email protected]

Comprehensive warranty programme

TITANIUM COBALT-CHROME

10-Year

@DENTSPLYImplUK

Connect with us:

0845 450 0586

John Wibberley, world-class dental technician and renowned educator, will be speaking at The Dental Technology Showcase 2015. His talk is one of many that are likely to inspire and motivate you, giving you new ideas and perspectives to succeed in your profession.

In an increasingly competitive market, our lives can revolve around work, so it is paramount that we spend those working hours in a state of happiness. When a person enjoys their job, they work harder, longer and more successfully. It is human nature to seek out the things we love and try to prolong that enjoyment for as long as we can. People who are passionate about their job employ maximum effort to achieve their goals; they are more productive and often become more successful in their field.

Individuals who love their job are able to meet challenges with enthusiasm to reach their full potential and, as we spend a relatively long time at work, they enjoy a better quality of life. When a job is a passion it empowers the motivation, enthusiasm and energy of an individual, which leads to confidence and strength. Similarly if a person has a specialised interest, talent or flair that brings them pleasure in their work, they are able to enjoy success and often recognition.

One such man is John Wibberley who is widely considered to be one of the most experienced dental technicians in the UK, working alongside many of the countries leading implant dentists. With his wealth of experience and knowledge of commercial laboratories, John is also the managing director of the award-winning Waters Edge Ceramic Dental Laboratory where 19 full time dental technicians specialise in implantology and high quality restorations.

John is very passionate about the subject and has been running dental technician courses and lecturing for over 20 years around the world, including the Association of Dental Implantology and British Academy of Aesthetic Dentistry.

John has also spent some time on the board of the Dental Laboratories Association as Director of Education helping to develop dental technology training and education. He believes in a formal training system for dental technicians but one that provides the correct balance between academic and vocational skills so that talented individuals are not discouraged from taking up the profession.

As recognition for all his hard work and his positive influences to the industry John was awarded with the title of Fellow of the British Institute of Dental and Surgical Technologists in 2005. This year John is lecturing at the Dental Technology Showcase on Friday the 17th of April in the Lecture Theatre at 11.45am. He will present ‘Implant Retained Dentures and Denture Stabilisation’ as part of the two-day educational programme. He recently spoke about his lecture:

“There are various materials available today to address the patient’s aesthetic and functional needs. The advantages and disadvantages of these materials will be discussed, as without a systematic approach with good communication, the end result is sometimes a huge disappointment for the technician, clinician and the patient.”

John aims to give technicians an insight into material selection and processing and will present and discuss three cases:

1. Fixed full dentures with two locator attachments in the lower denture: examining the choice of materials used and the techniques to produce high aesthetic results.

2. Milled bar over denture: discussing the choice of materials used and the techniques required to produce a high quality result.

3. Fixed All-on-4® restoration: considering the treatment planning, immediate loading and the final restoration.

This is a great opportunity for the whole dental team to benefit from John Wibberley’s experience and outstanding knowledge. The Dental Technology Showcase will also feature

an array of other nationally and internationally renowned speakers at the leading edge of their profession, providing dedicated and informative verifiable CPD sessions for DTs and CDTs. Attendees can also visit the Practical Theatre to watch live demonstrations and innovative techniques as well as the Technicians Workshop where they will have the chance to try new materials and gain hands-on experience.

New for 2015 will be Launchpad UK, providing delegates with the chance to see the latest products, technology and materials available in the UK dental industry. To take full advantage of the visit, attendees can register to receive updates and details of the manufacturers and suppliers exhibiting so they can plan their time at the showcase more effectively.

Dental Technology Showcase 2015 promises to be a worthwhile destination this year with an extensive programme of events to enlighten, enthuse and enhance the passion of technicians, clinical dental technicians and laboratory owners. There will also be opportunities to network and socialise for every member of the team so don’t miss it.

AT THE FOREFRONT OF DENTAL TECHNOLOGyContinued from front page...

DTS 2015 will provide the opportunity to explore different areas of modern dental technology, including tips for enhanced teamwork and introductions to new products and equipment. Aside from the two-day conference programme and CPD opportunities, the extensive trade exhibition will host more than 100 leading dental suppliers and manufacturers including 3Shape, Cendres + Metaux, Nobel Biocare, Straumann, Metrodent, Ivoclar Vivadent and Schottlander to name but a few. Each demonstrating the latest products, materials and technologies available, experts will be on hand to provide any information or advice you may need, helping you to choose the most suitable equipment for optimal clinical results, streamlined workflows and maximum return on investment.

With more than 1,800 dental technicians, clinical dental technicians and lab owners expected to attend, this will also be the perfect place to meet old friends and new.

As Steve concludes, this is one event truly designed for you and your team:

“The biggest benefit of attendance will be the exposure to new technologies. Held in a convenient location, DTS 2015 also provides a concentrated exhibition and lecture programme so that technicians can make efficient use of their time. The event is designed in the best interests of dental technicians and laboratory owners, and it is important that the industry is represented and supported in this way.”

Register for your FREE pass today: www.the-dts.co.uk/showtime

GET INSPIRED AT THE DENTAL TECHNOLOGy SHOWCASE

John Wibberley

Another year has rolled around, and once again the DLA are delighted to be working with CloserStill Media to deliver what looks to be the biggest and best DTS exhibition and conference to date.

It’s our aim to make sure DTS offers something for

everybody. Just take a look through this newspaper, and I’m sure you will find something – if not several things – of interest to you. This year we have several exciting new developments on show at DTS: many of your suppliers are presenting brand new products and services, there are international manufacturers, and some new companies based here in the UK will even be getting involved. Not only is all of this offered for free, but you also get access to an extensive range of seminars which count towards your verifiable CPD.

Throughout 2014 and since the beginning of this year, the DLA has been busy as usual with developments to support dental laboratories and dental technicians in the UK. Our British Bite Mark campaign is continuing to spread its message far and wide, educating dentists and the wider general public about the importance of knowing where our custom-made dental appliances come from and the benefits of supporting home-grown British labs.

The DTS exhibition this year is not to be missed and let’s not forget it’s also here to assist you as an individual technician or laboratory owner, so no matter how small or niche your business may be, don’t hesitate to speak to us about how we can support you at future events.

On behalf of the DLA and everybody involved with the Dental Technology Showcase who work so hard to make it happen, we look forward to seeing you at the NEC on the 17th and 18th April.

Jonathan Bill President, Dental Laboratories Association

THE DLA WELCOME yOU TO THE DENTAL TECHNOLOGy SHOWCASE 2015


CAD/CAM – ALL THE VERy LATEST AT DTS 2015

An intuitive display, easy handling and eight preset shooting modes guarantee perfect dental photos for anyone, anytime, anywhere.

Dentistry Show / DTS SHOFU Stand N50 • Metrodent Stand 20

SHOFU UK Riverside House · River Lawn Road Tonbridge · Kent · TN9 1EP Tel: 01732 / 783580 · www.shofu.co.uk

The camera, designed

exclusively for dentistry

Lecture Theatre

Each education stream will have a full two day programme. For full details, please visit www.the-dts.co.uk/conference

FRIDAy 17TH APRIL

09:30 - 09:45

Opening WelcomeSteve Taylor, Fellow of the British Institute of Dental & Surgical Technologists (BIDST) and Conference Chairperson

09:45 - 11:15

IPS e.max Aesthetic Considerations and Technical DevelopmentsRob Lynock, Dental Technician & Owner, Naturally Beautiful Smiles

11:45 - 12:30

Implant Retained Dentures, Fixed and RemovableJohn Wibberley CDT FBIDST, John Wibberley Dental Seminars

12:45 - 13:45

Identifying Oral DiseasesGraham Gilmour

14:00 - 15:00

Beyond Private Dentures – Offering Your Clients Premium Aesthetics and FunctionRowan Garstang BSc Hons HNC OND, Registered Dental Technician and Dr Finlay Sutton BDS DGDP (UK) MSc MFDS RCS Ed MRD RCS Ed PhD FDS (Rest Dent) RCS Ed., Registered Specialist in Restorative Dentistry, Prosthodontics, Endodontics & Periodontics

15:15 - 16:00

Patient Centred Occlusion for Fully Functional DenturesJohn Bill, Registered Dental Technician, Dentology Sciences Ltd

16:30 - 17:30

Function and All Ceramic RestorationsJulian Dorey

SATURDAy 18TH APRIL

09:30 - 09:45

Opening WelcomeSteve Taylor, Fellow of the British Institute of Dental & Surgical Technologists (BIDST) and Conference Chairperson

09:45 - 11:15

Bio-Emulation: Science Meets ArtSascha Hein

11:45 - 12:30

Everything Digital? New Time Saving Materials & Techniques Vanik Jinoian, CDT

12:45 - 13:45

How to Construct an “Unbreakable” Orthodontic ApplianceS James Abbott Bsc (Hons) Prof. Dip LOTA RDT, SeniorOrthodontic Technician, William Harvey Hospital, Ashford, EastKent Hospitals University Foundation Trust

14:00 - 14:45

Polymers: The New Gold StandardPhil Reddington, Managing Director and Head Ceramist, Beever Dental Technology, Leeds

15:15 - 16:15

Embracing Technology: A Digital OdysseyStephen Green RDT MBA

Official Media Partner

Education Partners

CAD/CAM Theatre

FRIDAy 17TH APRIL

10:00 - 11:00

Joining Clinics and Labs in Complete Digital WorkflowsMorten Ryde Holm-Hansen, Clinical Dental Technician, 3Shape

11:30 - 12:30

‘The Bridge’ - building a bridge between traditional handicraft and modern CAD/CAM technology!Ralf Oppacher, Master Dental Technician, Shera

13:00 - 14:00

Dental Implantology - Total Oral RehabilitationManoj Vijayanarayanan, MBA, Technology Director, EvoDental Implant Centre

14:30 - 15:30

CAD/CAM, a Level Playing Field?Dave Woolridge, Sales Manager UK, Bego GmbH

16:00 - 17:00

New Digital Treatment Concepts in Implant DentistryDr Andrew Dawood, MRD RCS (Eng) MSc BDS, Founding Partner, Dawood-Tanner

New for 2015 the CAD/CAM Theatre hosts a variety of speakers from home and abroad, experts in the field of digital dentistry. The Theatre has been designed to create an intimate environment to interact with and gain the most from the speakers.

A great opportunity to find out where dental technologies are heading, the impact on the dental laboratory and how to integrate into and alongside existing working practices.

For full details on the education streams, please visit www.the-dts.co.uk/conference

No longer a new concept in dentistry, digital workflow has evolved as more companies are offering tried and tested solutions designed specifically for dental laboratories.

Following so many exciting developments, it’s no wonder this is one of the hottest topics in dentistry right now. In fact, of the 1,600 dental technicians, CDTs and lab owners who attended the Dental Technology Showcase (DTS) 2014, 50% were already searching for CAD/CAM solutions to suit them.

To this end, DTS 2015 will provide the perfect platform for you to delve further into the world of CAD/CAM. Within the extensive trade show you will find everything you need to adopt new technologies or enhance your current digital capabilities. From scanners of all prices and sizes to software, milling machines, 3D printers, lasers and consumables, there is a huge amount of free knowledge to be gained, as well as the opportunity to get hands-on with the vast array of equipment and materials available. Among more than 40 exhibiting companies offering CAD/CAM will be 3M ESPE, 3Shape, Amann Girrbach, Attenborough Dental, Bego, Bristol CAD/CAM, Carestream Dental, Consilio3D, Delcam, Doceram, GoPrint3D, Ivoclar Vivadent, LMI Technologies, Nobel Biocare, Laser Lines, Panadent, Renishaw, Sagemax, Schottlander, Sirona, Smart Optics, Straumann, Techceram, ZFX, Zirkonzahn and many more representing hundreds of products!

What’s more, the two-day educational programme at DTS will provide further insight into the modern digital workflow, with leading speakers exploring the intricacies of today’s CAD/CAM technologies both in the Lecture

Theatre and brand new CAD/CAM Theatre. Sessions will be presented by Stephen Green, Vanik Jinoian, John Wibberley, Morten Ryde Holm-Hansen, Dave Woolridge, Xabier Egurbide, Gianni Storni and many more. They will cover everything from the construction of orthodontic appliances to how legislation and trends are going to affect how we treat patients of the future, as well as how CAD/CAM can be utilised alongside existing practises for enhance outcomes. You’ll also have the chance to witness the smooth workflow achievable with digital workflows live on stage, explore the endless designing possibilities of CAD/CAM and learn more about the critical steps needed to ensure accuracy for complex screw retained restorations.

As Stephen Green says:

“A one-man lab may not require the same technologies as a large operation, and it’s important to choose the most appropriate piece of equipment for the business. As with any investment, the return achieved is an important aspect to think about even before purchase.”

For information and advice on the very latest CAD/CAM solutions, as well as a huge choice of technology, education and training, don’t miss DTS 2015. There really is something for everyone!

“AS with Any invEStmEnt, thE rEturn AchiEvEd iS An imPortAnt ASPEct to think About EvEn bEforE PurchASE”

Don’t miss out on all this FREE vCPD education, register online at www.the-dts.co.uk/showtime

SATURDAy 18TH APRIL

10:00 - 11:00

Joining Clinics and Labs in Complete Digital WorkflowsMorten Ryde Holm-Hansen, Clinical Dental Technician, 3Shape

11:30 - 12:30

CAD/CAM, a Level Playing Field?Dave Woolridge, Sales Manager UK, Bego GmbH

14:30 - 15:30

Restorative Treatment Plan Options for Removable Prosthetics Utilizing CAD/CAM Technology and/or Traditional Wax Up TechniquesGianni Storni, Rhein 83

STAND 42Schottlander will be presenting on-stand seminars and workshops, demonstrating all the latest skills, techniques and technologies.


COME FORTH INTO THE LIGHT OF THINGS, LET NATURE BE yOUR TEACHER.

Practical Theatre

Seminar SuitesFRIDAy 17TH APRIL 10:45 – 11:30 - Seminar Suite 2 SATURDAy 18TH APRIL 10:45 – 11:30 - Seminar Suite 3

Valplast Flexible Partial Dentures, Answers to your clinical and laboratory questions to achieve the ideal Valplast!Derren Neve, DCP MDTA, Sales and Technical Director, RDT Technology Ltd and James Neilson, CDT

Cendres + Metaux have created an education area at DTS this year with seminars and hands on demonstrations. Come and learn from the range of Creation Ceramists that include: Sascha Hein, Naoki Aiba, Fechmi Housein, John Wibberley, Gary Jenkinson, Phil Reddington, Lee Mullins, Richard Gidden, Simon Newbold and Julian Dorey. All of the presenters have been asked to present on subjects they have a passion for, so look out for what is sure to be an exciting line up at DTS this year.

THEATRE STAND 205

TICKETS ARE LIMITED SO BOOK yOURS TODAy!

£18 PER TICKET (INC VAT) OR £80 FOR 5 TICKETS• Hot buffet meal• Complimentary drinks

Call Matt Stokes on 020 7348 5263 or email: [email protected] to book your tickets now!

DTS 2015FRIDAy NIGHT SOCIAL

In partnership with

DELEGATES & EXHIBITORS WELCOME

JOIN US FOR A FUN-FILLEDEVENING ON FRIDAy 17TH APRIL, 5.30PM-9.30PM AT WETHERSPOONS (ON-SITE AT THE NEC).The pub is conveniently located on-site at NEC.

After a busy first day at The Dental Technology Showcase, bring the team, clients and friends along to enjoy a buffet dinner, plenty of drinks and a friendly atmosphere.

William Wordsworth

SASCHA HEINBiography:

Sascha Hein, MDT graduated in dental technology in 1997 in his native Germany before working in a number of dental laboratories in Europe and the United Arab Emirates. He completed further studies in dental ceramics under Masahiro Kuwata in Tokyo, Japan and in 2004/05 he attended Master School in Freiburg, Germany where he graduated top of school and won silver in the annual Kanter Award Competition which premiers Germanys top three Master School students.

In 2007, founder Willi Geller inducted Sascha into the international Oral Design group and since 2011 he has served as editorial board member of the German Quintessence of Dental Technology. In 2012 he was welcomed into the Bio-Emulation group of which he currently holds presidency. Sascha Hein has lectured internationally for many years and has authored numerous publications of which some were featured in the 2009, 2011 & 2014 QDT Yearbook. After spending twelve years in Perth Western Australia, Sascha returned to his hometown in southern Germany in 2013 where he now lives and works.

Throughout existence, humans have learnt from nature to solve complex problems. Nature provides engineering solutions and inspires new technology everyday – researchers study all areas of nature to emulate its unique properties for scientific advancement.

For example, the centripetal spirals found in flowers and shells assist with the ideal flow of liquid; principles from the highly developed, reflective structure of butterfly wings have improved display technology; engineers have observed the characteristics of birds and fish to create efficient aerodynamics and the study of flora and fauna of the ocean have influenced the design of underwater turbines for tidal power generation. Similarly, architects frequently emulate the shapes and properties of plants, land and sea to inspire designs for buildings and structures.

Dental professionals are also constantly emulating nature when matching the colour of the dentition as well as the shape, colour and texture to create natural looking restorations. This is an example of bio-emulation and a thorough understanding of the structures and light interaction of the natural teeth is required for practitioners to achieve the best aesthetic results.

This fascinating world is an area that the Bio-Emulation Study Group is dedicated to. This international group of dental professionals are devoted to the advancement of excellence in aesthetic dentistry by using biomimetic approaches to recreate the anatomical form and optical features of the natural tooth. The group’s principal, Sascha Hein MDT, explains:

“To emulate nature as closely as possible has always been at the core of human desire. It has formed the foundation for many cultural and artistic developments.

“Modern dental technology also perpetually strives for individual aesthetic perfection. However the consistent and precise reproduction of the shade of natural teeth still presents us with an unchanged challenge - despite the immense academic and scientific efforts of the last twenty years.”

Sascha Hein has conducted a wealth of independent research into bio-emulation. He has authored many publications and his studies have led to the development of the visual_eyes liquid and the fluor_eyes flash system for fluorescent dental photography. Sascha has lectured around the world for many years and is due to deliver a 45 minute presentation entitled “Bio-Emulation: Science meets Art” in the Lecture

Theatre of the Dental Technology Showcase (DTS) 2015. The flagship event of the Dental Laboratories Association (DLA) will take place on Friday 17th and Saturday 18th April, at the NEC in Birmingham, held alongside The Dentistry Show.

Sascha adds:

“I am keen to share my practical experience as well as the results of my many years of research and investigations with delegates - from the shade taking process, to dental photography, to the practical realisation.

“Both the demystification and the recognition of established ideas is necessary to foster personal development and growth, to produce consistent results in the every day of a busy dental laboratory. Join me on this creative adventure in search of nature and origin!”

There is always something new to learn and as William Wordsworth puts it so eloquently, ‘let nature be your teacher’.

Further learning opportunities available throughout DTS 2015 will be delivered through the brand new CAD/CAM Theatre. Bringing you the latest news and ideas in modern technologies and enhanced workflows, this Theatre will host leading dental manufacturers and suppliers who are keen to show how you can enhance your business processes with CAD/CAM.

Also new to DTS 2015 will be Launchpad UK, where you will have the chance to discover all the latest materials and innovations in the UK market. Registrants will even receive updates in the weeks leading up to event, so you can plan your visit and make the most of everything on offer.

Finally, designed specifically for dental technicians, clinical dental technicians and lab owners, the lab-dedicated Lecture Theatre, Practical Theatre Technicians Workshop will offer over 70 lectures, live demonstrations and interactive workshops. In addition to Sascha Hein, world-class speakers including John Wibberley, Jonathan Bill, Stephen Green and Phil Reddington will be presenting, with verifiable CPD available throughout.

For all this, plus copious networking and socialising opportunities make sure you and your team don’t miss DTS 2015! Register for your free delegate passes online today.

“i Am kEEn to ShArE my PrActicAl ExPEriEncE AS wEll AS thE rESultS of my mAny yEArS of rESEArch And invEStiGAtionS with dElEGAtES”

Sascha Hein’s lecture takes place in the Lecture Theatre on 18th April at 09:45. A session not to be missed!

The Practical Theatre hosts a series of at bench practical presentations of materials and techniques in a dedicated theatre on the show floor. These presentations and case studies will be to a theatre audience with live work projected onto a screen behind the presenter.

Sessions offer the chance for technicians to learn first-hand how to implement aspects of the presentations into their day to day working practice.

FRIDAy 17TH APRIL

10:00 - 11:00

GC LiSi. The New Future Orientated Ceramic for Lithium Di Silicate CeramicsRalf Dahl MDT, Managing Director MB Dental Technik, GC UK Ltd

11:45 - 13:00

Screw Retained Solutions through CAD / CAM for Simple and Complex CasesXabier Egurbide BBS, Internationalization Director, Createch Medical

13:15 - 14:00

Industrial 3D Printing of Removable Partial Dentures, Crowns & Bridges & Dental ModelsGregor Szwedka, Dipl. Ing. Dental Technology & CDT, Additive Manufacturing Consultant - Dental, EOS GmbH

14:30 - 15:30

Denture Characterisation - Teeth and Pink AestheticTomasz Dabrowski, Dental Technician, Lab Owner, ProfiLab s.c., Warsaw

SATURDAy 18TH APRIL

13:15 - 14:00

Clean Dentures - Not a Simple Solution. Helping Patients Maintain Their DenturesDr David Attrill, BDS PhD FDS RCS(Ed) FDS RCS (Rest. Dent.) FHEA, Senior Lecturer and Hon. Consultant in Restorative Dentistry, University of Birmingham

14:30 - 15:45

Screw Retained Solutions through CAD / CAM for Simple and Complex CasesXabier Egurbide BBS, Internationalization Director, Createch Medical

1. 3M ESPE Internal Data. Claim number 5224. 2. 3M ESPE Internal Data. Claim Number 5215

3M, ESPE and Lava are trademarks of 3M Company or 3M Deutschland GmbH. VITA, VITA 3D-Master, 3D-Master color designations (except 3M1, 3M2, 3M3) and VITA VM are trademarks of VITA Zahnfabrik H. Rauter GmbH & Co. ©2014, 3M. All rights reserved.

0845 602 5094 www.3MESPE.co.uk

Now in Disc Format.Trusted Brand.

NEWSTAND P55

• Available in 98 mm Disc format with or without step to fi t most

open source milling systems

• Excellent match to VITA Classic and VITA System 3D-Master ® Shades1

• 3M’s patented shading technology results in warm and natural aesthetics2

• Choose from easy Dip Shading or Natural Gradient Shading for

unlimited individualisation

Lava™ Plus High Translucency Zirconia Disc

WHEN & WHEREFriday 17th April and Saturday 18th April 2015Registration opens at 08:30

Hall 18 NEC, Birmingham, UKNearest Train Station: Birmingham InternationalPostcode for Sat Nav: B40 1NTDTS has appointed event specialists, Event Express to negotiate special deals on nearby accommodation to suit all budgets and within easy reach of the show. Visit the-dts.co.uk/travel

rEGiStEr for frEE ONLINE: THE-DTS.CO.UK/SHOWTIME BY PHONE: 020 7348 5776


Help your patients eat, speak and smile with confi dence with the POLIGRIP® denture care regime.

CHGBI/CHPOLG/0006/15b

*In vitro single species biofi lm after 5 minutes soak.References: 1. Glass RT et al. J Prosthet Dent. 2010; 103(6): 384-389. 2. GSK Data on File, literature review. August 2013.

3. GSK Data on File, Fernandez et al. 2006. 4. GSK Data on File, Lux R. 2012. 5. GSK Data on File, April 2011. POLIGRIP is a registered trade mark of the GSK group of companies.

Come and visit us at DTS stand 610

Dentures contain surface pores which microorganisms can colonise.1 Good denture hygiene is therefore essential – but, because dentures are about 10 times softer than enamel,2

cleaning them with non-specialist products like regular toothpaste can damage the surface.3

POLIGRIP® Denture Cleansers are proven to penetrate the biofi lm* and kill microorganisms within hard-to-reach surface pores.4 Available in a choice of variants, POLIGRIP® Denture Cleansers are non-abrasive3 to clean5 the delicate denture material without scratching.3

SM6252 Poligrip DTS Half Page Ad 2.indd 1 11/03/2015 09:04

ADI Implant Theatre In PartnershipWith

FRIDAy 17TH APRIL

10:00 - 11:00

Lower Face Trauma in Civilian and Combatant War Victims in Misurata Libya with Dental Implants - Lessons Learned by an Oral SurgeonDr Abdulhakim Zaggut , BDS MSc, Oral Surgeon, Misurata Dental School

11:30 - 12:30

Starting Out in Implant Dentistry: Safety First, New Technology & the ADIDr Peter JM Fairbairn BDS, Scarsdale Dental Aesthetic and Implant Clinic

13:15 - 14:15

Immediate Load Implant Technology and How it Will Change the Way You Practice DentistryDr Charles Schlesinger DDS FICOI, Chief Operating Officer, OCO Biomedical

14:30 - 15:30

Achieving Predictability with Immediate Implants in Aesthetic AreasGonçalo Dias DMD MSc, Oral Surgeon, Implant Direct

15:45 - 16:45

Improve your Implantology with a Digital WorkflowMaria Hardman, BDS DUI MJDF RCS MFDS RCS, Clinic 95 Private Practice

SATURDAy 18TH APRIL

10:00 - 11:00

Starting Out in Implant Dentistry: Safety First, New Technology & the ADIDr Peter JM Fairbairn BDS, Scarsdale Dental Aesthetic and Implant Clinic

11:30 - 12:30

The Full Arch Implant Bridge - Immediate Placement, Loading and Aesthetics! Douglas Lee BDS

13:00 - 14:00

Is It Time for Dental Implant Treatment to Employ Patient’s Perspective?Shahram Nik PhD, CEO and R&D Director, S&S Biomat Ltd

14:30 - 15:30

When Implants Go Wrong - Rescues and RemediesDr Wail Girgis, Specialist Prosthodontist, Clinical Lecturer and Examiner, Devonshire House Dental Education

CORE CPD TheatreThe CORE CPD conference returns in 2015, with an expanded and improved two-day programme. Covering all the major CPD topics, experts will run presentations on infection control and prevention, radiation protection and medical emergencies, as well as early detection of oral cancer.Tailored to meet the needs of all dental professionals, this is a fantastic chance to refresh your knowledge and top up your CPD file.

FRIDAy 17TH APRIL

09:30 - 10:15

Radiation Protection for Dental Diagnostic RadiographyMichael Thomas O’Mahony BA BSc (Hon) MSRP, Radiation Protection Adviser, Radioactive Waste Adviser and Director, Radiation Protection Advice and Services

10:30 - 11:15

Decontamination and HTM 01-05Nicky Benbow, Decontamination Specialist, Henry Schein Dental

11:30 - 12:15

Medical Emergencies in the Dental PracticeHelen Watson, RGN PGDip ALSi, Lead Trainer, Orchard Training Services

14:30 - 15:15


15:30 - 16:15

Medical Emergencies in the Dental PracticeHelen Watson, RGN PGDip ALSi, Lead Trainer, Orchard Training Services

16:30 - 17:15

The Early Detection of Mouth Cancer - A Team Effort!Philip Lewis BDS, Ambassador, Mouth Cancer Foundation

SATURDAy 18TH APRIL

09:30 - 10:15

Empowerment in Mouth Cancer: Your Patient from Diagnosis to RehabilitationLet’s Talk About Mouth Cancer, Campaign Team, Consultant Maxillofacial Surgeon and Dental Core Trainees

10:30 - 11:15

Focus on CBCT: Why Scanning, Referral Criteria & the Use of Viewing SoftwareVeronique Sauret-Jackson MPhys, MSc, PhD, MBA, Consultant Medical Physicist and Managing Director, Cavendish Imaging Ltd

11:30 - 12:15


14:30 - 15:15

Early Detection of Oral CancerChristina Chatfield, Hygienist / Clinical Director and Sarah Murray, Programme Lead for Dental Care Professionals, Barts and The London School of Medicine and Dentistry


B80

B85

C80 C85 D90 D92D91 E80

E81

E82

E75

E76

D98 D96 D95

D80 D82

D88 D85

D72C75B70

A70A67

A64

A62

A61

A50

A52

A40

A32

A30

A25

A22

A20

A10

A05

A01 B01 B05

B10

B20

B35

B45

B40

B44

B55

B50 B51

B56

B66

B65

C60

C50

C40 C42

C30 C32 D30

D35C38

C20

C10

C01 C02 D01 D03E01

E05

E10 E15 E16 E17 E19

G01 G06 H01 H02 05 100 200 300 400 402 404 500

610

605

615

618

620

634

636

640 650 660

R50

S68

S67

S65

S60 S62R60R69

S70

S75

S80

S89

S85

S87

S77

S72

R70

S82

R62

D10

C22 D22 D23

D20C28

C48

D40 D42

D45

C52 D55

D54

D51

D50

D52

C54

D60

D65

B52

B42

B32

B60 B61 B62

C70

510

515

508

511

505

525

523 527

310 308

303305301

333

330

345 347

346

340

M55

M50

M65

M64

M63

M60 M62

M70

M80

M88

M89

M85L80

K70J71 J72J70H70

H81H80

H88

G95

G80

G85

G70

G75

G60

G50

G55

G40

G30

G32 G36

G22 G20

G25F25

F20

F33

F30

F48

F40

F50

F60E60

E62

E63 E64

E65

E50 E51

E59

E54 E53

E52

E55

E40

E42

E32E30

E39 E38

E26E27E25E20D28

E22D25

E23

E29

E56

F72

E78E70

F70 F75

F78

F62

G10

G12

G14

G18

G35

G41

G42

G45

G72

G82

G86

H82

H97H98 H96H92H90

H85

J75

J65J60

J62

J50

42 45

40

3035

32

31

20

15

H25 H23 H22

H21H20

H34 H35

H30

H40

H55 H58

H50 H52

H42

H38

H32

8 10

J52

J55

J68

K72

K75

L87

L85 L84

L82

L70

L75

L60

L62

L50K52K50

K58K51L55

240

245

230

220

225

210110

120

130

145

140

147

142

132

122

115

208

205

236

238

248

L72 M72

M75

M52

335

530

545

540

P60

P70

N70

N72

N60 N62

N65

N50 N52

N53

N54

N78

N75

546

B63

306

C72

B30

G90 G92

670

SPRYXYLITOL

ASPIRADENT

GUMSAVER

A65SOLEMATES

VELOPEX

A66INTERNET DENTAL MARKETING

OCOBIOMEDICAL

BDHF

BOCHEALTHCARE

DBDENTALEQUIPMENT

HAPPYTHREADS

GRAHAMEGARDNER

MEDIDENTITALIA

SHARESERVE

DENTALNURSING

HARRIETELLIS

RA ACCOUNTANTSLLP

TRYCARE

SIXMONTHSMILES

ISONHARRISONdbgORAL-B

GDPUK.comMERCIA DENTAL

EQUIPMENT

GLAXOSMITHKLINE

A-DEC DENTAL UK LTD

DPASDENTAL PLANS

DENTAL CPDPRO

QUDENT

SEPTODONT PARSDENTAL

FRANK TAYLOR& ASSOCIATES

CTSDENTAL

SUPPLIES

MED IMAGINGNIMRODENTAL

CORTEXDENTAL

IMPLANTS

CARESTREAMDENTAL

SURVIVAL-32

TECHNIK INSTRUMENTS

J & SDAVIS

DENTAL TRADENETWORK

LILY HEADPRACTICE SALES

DENTALDESIGN

AMSACCOUNTANTS

MEDICAL

D48ORALIGN

DENTALSKY

SNOWBIRDFINANCE

BUPA BELMONT

DB DENTALAUSTRALIA

BALDUSMEDIZINTECHNIK

GMBHDP

MEDICALSYSTEMS

MUSTAFAOZPOLAT

UKLOUPES

TURN KEYDENTALSUPPLIES

A-DEC DENTALUK LTD

AUTOBIN.CO.UK

CURAPROX UK

WATERPIK ALPHA DENTIMPLANTS

MIDMARKEMA

DENTAID

VATECH DENTALMANUFACTURING

DENTAL SUPPLIES MAGAZINE

ANGLIANDENTAL

YIRRO-PLUS

AWANZA SURGIDENT CO.

PURPLEORCHID PHARMA

AGIRO CAPITALBOND

PREVISERORA HEALTHASSESMENT

DENPLAN

IDH GROUPDENTISTRY SHOW

OFFICE &INFORMATION POINT

BRIDGE 2 AID – VILLAGE GREEN

APOLLINE SMILE-ON

ROYALBANK OFSCOTLAND

CENOBIOLOGICS

INSTAWHITE

CHRYSALISFINANCE

LEADERSINC

BEAUTYGATE

DENTALPROTECTION

ZESTY

KFA MEDICAL

F2 MEDICALSUPPLIES

MEDIFINANCIAL /MEDICRUIT /MEDISTATES

QUICKSTRAIGHT

TEETH CITY OF LONDONDENTAL SCHOOL

FGDP(UK)

OASISDENTAL CARE

FOOCOO

TRYCARE

DENTAL FOCUS DDU

DENTISTS PROVIDENT

WE LOVE SURVEYS

HEARTYOUR SMILE

JUST DENTALMARKETING

LTD

ZFXIMPLANTIUM

BIRLESIKGRUP DENTAL

JOHN WINTER & TAVOM

ENVISIONTEC

RPS &PRODWAYS

3SHAPE

CONSILIO 3D

LDF DENTALA

VOCO

OSTEOCAREIMPLANTSYSTEMLTD

NABERTHERM

LASERLINES

AMANNGIRRBACH

AG

JJ THOMPSON LTD /EURODONTIC LTD

TECHCERAM

DOCERAMMEDICAL

CERAMICS

CONSULTSEARCH +

SELECTION

CROWNSURGICAL

CORPDENTALWAREHOUSE

ESM DIGITALSOLUTIONS

DENTSPLYIMPLANTS

RENISHAW SAGEMAX

ATTENBOROUGHDENTAL

BRACON CENDRES +METAUX THEATRE MILNES BROS

DLABACDTBIDST

CDG

DENTLABMANAGERDB LAB

SUPPLIES KEMDENT

LABTRACSOLUTIONS

SMARTOPTICSLMI TECH KALABHAI

KARSON EOS – ELECTROOPTICAL SYSTEMS

DTA

GOPRINT3D

DEGOS

HK 3DPRINTING

RDT TECHNOLOGY- VALPLAST

ARC AESTHETIC PROFESSIONALS

3M ESPE

WHW

CONNECT-DENTAL

DEVONSHIRE DENTALMEDICALAESTHETICSTRAINING

DENTSPLY

CLARK DENTAL,MEDIFINANCE,

TAYLOR ROBERTS,DR BOB KHANNA

CHRISAD

UKDENTISTRY

RAVAT & RAYDENTAL CARE

PHILIPS ORALHEALTHCARE

KERR

DENTALTRIBUNE

INTERNATIONAL

SIRONA DENTAL SYSTEMS

ROSE & CODERMAPEN

3DAESTHETICS

SYNERONCANDELA UK

MONEY4DENTISTS INTELLIGENT

ALIGNMENTSYSTEMS

DENTAL CIRCLE

VSDENT

PARKCAMERAS

BAUSCH

PRESTIGEDENTAL PANADENT

ABBEY DENTALSUPPLIES

EUROPA DENTAL LABORATORIES

DIGITAL DENTAL

EVIDENTLABS

ACORNPOLYMERS

IMETRIC3D

MILLPONDMILLING

TOC THEORTHODONTIC

COMPANY

CENDRES +METAUX

STRAUMANN

ZIRKONZAHN TECHNICAREDENTAL SUPPLIES

IVOCLARVIVADENT

NDSAIDITE

CERAMICS

IVOCLARVIVADENT

QUINTESSENCEPUBLISHING

DENTAL-DEVICES/TRIHAWK BURS

DENTAL PRACTICEGROWTH UK

ANSONSSOLICITORS

IMPLANTDIRECTEUROPE

AG

OSSTEMIMPLANT

MDDUS SKINBRANDS

SHOFU

DUXDENTAL

SCICAN

MEDSTARS

ENLIGHTENSMILES

FMC &INDEPENDENT

SEMINARS

HERAEUSKULZER BLUE PRINT

DENTAL

INVISALIGN

MEDISICOCLINICS

WHWCLINICAL

BRISTOLCAD/CAM

& BRISTOLCROWN

COMPANY

MR DENTALSUPPLIES

BIOHORIZONS

AB DENTALIMPLANTS

ACTEON

ASSOCIATIONOF DENTAL

IMPLANTOLOGY (ADI)PARADIGM

DESIGNSOLUTIONS

DENTALDIRECTORY

SOFTWAREOF

EXCELLENCECOSTECH ELITE

COMPLY

DENTALELITE

Z-SYSTEMS

COSTCOWHOLESALE

VSMHEALTHCARE

AXISDENTAL

ADMORDENTALPLUS

JFHLAW

WEXPHOTOGRAPHIC

BIRMINGHAMMETROPOLITAN COLLEGE

CERAMICRECONSTRUCTIONS

BREDENT BIOMET 3i

AWBTEXTILES

COSMETICCOURSES

UNIVERSITYOF WARWICK

RXALIGNERS

NDC

VESTRAWEALTH LLP

B.J.MLABORATORIES

SENDOLINE

HATCHARDMEDICAL

JSPDENTISTRY

SHOWSTUDIO

COSMETICINSURE

Q.E.D

ICE SWEDEN +MARTINA GEISTLICH

REFRESHDENTIST WIPES

MOUTH CANCERFOUNDATION

LEASEUK

PRACTICEPLAN

METRODENT

BEGO

DENTALDIAMONDS.CO.UK

PREMIERINADA

MIDLANDLEAD HEALTHCARE

CEREZENDEVICE

MEDICARELTD

SUPPORTDESIGN

PSUK

DENTALDECONTAMINATION

DENTALA2Z

HENRYSCHEINDENTAL

BUSINESSIQ

CHIRALSYSTEMS

CLICK CONVERT SELL

CYNOSUREUK

ORASCOPTIC

DENTALFINANCE

ALKAPHARMUK

PURPLEMEDIA

SOLUTIONS

MDSMEDICAL

OPTILOUPE

BROSCH DIRECT

ESAM CATTANIUK LTD

PERFORMANCEFINANCE

SCHOTTLANDER SCHOTTLANDER

BIEN-AIR DENTAL

OPTIDENT

EVIDENTCOLTENE

PERIOCHIPNATUREIMPLANTSCHRISTIE & CO

SAPPSUMA

ORTHO-CAREUK LTD

GEORGEWARMAN

PUBLICATIONS

NOBELBIOCARE

PLANMECA

CAMLOG

LLOYDSBANKINGGROUP

BQE

THEENTREPRENEURS

CIRCLE

iSMILE

VICARGECOURT

WISDOMTOOTHBRUSHESLTD

WISEPRESSTIME2 SEO DESIGN SOCIAL

SARAHGRACE

AIS CAVENDISHIMAGING

LONSDALEINSURANCE

COUNTY ASSET FINANCE

PRACTICEPLAN

MICROMINDERWESLEYAN

INITIAL MEDICALSERVICES

COLGATE

SHIRE DENTAL

GLOVEMANSUPPLIES

PRACTICEGROWTH

SMILEIMAGING

AMLHEALTHCARE

ASHLEY LATTER

CAREQUALITY

COMMISSIONHCB

SOLICITORS

HARLEY STREETACCOUNTANTSNUVIEW

NASDAL CLEANCERT

SOUTHERNIMPLANTS WIRED

ORTHODONTICS

DENTAL PRACTICEJOURNAL

RHEIN83PERIO IMPLANT

INTERNATIONAL

DEEP TISSUEMASSAGER

CUSTOMDENTAL

DENT-O-CARE

S4S(UK)Ltd

M-CUBEDACCOUNTANTS

KING'S COLLEGE LONDONDENTAL INSTITUTE

S&S BIOMAT

PEPPERSMITH

SWALLOWDENTAL SUPPLIES

PM & DNT

DR BRIANFRANKSTRAININGEXPERIENCE

ZENOPAQUICKLASE

QUICKWHITE

SURGERYEXPRESS

SMILECONCEPTS

JOHNSON & JOHNSON

LABELMAN

TANDEX SPINALISDENTAL

BADT

BSDHT

BADN BSP BACD

ADAM

BOS

BESGLAXOSMITHKLINE

NEUMANS LLP

ONE VISION HEALTH

DENTALMARKETING EXPERT

MATT RICKARD

MEHRIAGROUP

MEDICACCOUNTANTS

EON ALIGNER

LEMONCHASE MEDIPLUS

JWHINKS

GERRYBLATTER

BIOEDENSTEM CELL BANK

SINTONSLAWTePe

ORAL HYGIENE PRODUCTS

DELEGATE CATERING DELEGATE CATERING DELEGATE CATERING

NATIONALDENTAL

NURSINGCONFERENCE

CORE CPDTHEATRE

HYGIENISTS &THERAPISTSSYMPOSIUM

GDPTHEATRE

DENTALBUSINESSTHEATRE

DTSLECTURE THEATRE

DTSPRACTICAL

THEATRE

DELEGATE SEATING

AESTHETICDENTISTTHEATRE

HANDS-ONWORKSHOPFACIAL

AESTHETICSTHEATRE

HANDS-ONWORKSHOP

HANDS-ONWORKSHOP

ENDOLOUNGE

HANDS-ONWORKSHOP

BSP PERIOLOUNGE

BUSINESSSKILLS

WORKSHOPPROFESSIONAL

HUB

VIP LOUNGE

SHORT-TERMORTHO LOUNGE

COMPLIANCECLINIC ADI IMPLANT

THEATRE

MEMBERSHIPLOUNGE

DTSVIP

LOUNGECAD/CAMTHEATRE

Correct at time of print.Not to scale.

M81

M82 N80 P80 P85

P72 P75

P50 P52 P53

P55

S50

S55S54

S53

S52

SPONSORED BY:

SMG3DGC UK

AME GROUP

ELOSMEDTECH

THOMAS DORNANPRINTERS

COOKSONDENTAL OTA

GLAXOSMITHKLINE

REITEL

H10

H15

H11

H12H18

H19

K81K80 K82

K88

K86 K85

K84

SPONSORED BY:

HR DEPT.

DENTISTRY SHOWDELEGATE ENTRANCE

DENTAL TECHNOLOGYSHOWCASE

DELEGATE ENTRANCE

FASTBRACES

MUNROESUTTON

NAPC

STORAGE

CHARMINGDENTAL

WEST ONEDENTAL

SUPPLIES LTD.

625

S63

STAND BOOKED DTS

STAND BOOKED DS

H99

IN PARTNERSHIP WITH

OFFICAL MEDIA PARTNER:

IN PARTNERSHIP WITH:

3M ESPE (dS)3ShapeAbbey Dental SuppliesAcorn Polymers UK LtdAIDITE HIGH-TECHNICAL CERAMICS CO., LTDAlkapharm (dS)Amann Girrbach AGAme GroupAttenborough DentalBioHorizons (dS)Biomet 3i (dS)Birlesik Grup DentalBirmingham Metropolitan College (dS)BOC Healthcare (dS)BQE (dS)BraconBredent (dS)Bristol CAD/CAM Bristol Crown CompanyBritish Association of Clinical Dental Technology (dS)Camlog (dS)Carestream Dental (dS)CDG

Cendres + MetauxCentriCharming DentalChrisad (dS)Coltene Ltd (dS)Consilio 3D LtdConsult Search + SelectionCookson DentalDanville (dS)DB Lab Supplies DEGOS Dental GmbHDelcamDental A2Z Ltd (dS)Dental Design (dS)Dental Focus (dS)Dental Laboratories AssociationDental Practice Journal (dS)Dental Technologists AssociationDental Tribune International (dS)Dental Warehouse (dS)Dental-Devices.co.uk / TriHawk Burs (dS)DentaurumDentech DentalDentlab Manager

DENTSPLY (dS)Dentsply ImplantsDigital DentalDOCERAM Medical CeramicsEGSElos MedtechEnvisionTECeon aligner (dS)EOS - Electro Optical SystemsESM Digital SolutionsEuropa Dental Laboratories LtdEvident (dS)Evident LabsExamVision (dS)GC UKGlaxoSmithKlineGoPrint3DHenry Schein Dental (dS)Heraeus Kulzer (dS)HK 3D Printing LtdImetric 3DImplantium UK LtdIvoclar VivadentJJ Thompson Ltd / Eurodontic Ltd

John Winter & TAVOMKalabhai Karson Pvt LtdKemdentKerr (dS)King’s College London Dental Institute (dS)Labtrac SolutionsLaser Lines LtdLease UK (dS)Lloyds Banking Group (dS)LMI TechnologiesM Cubed Chartered Accountants (dS)Med Imaging Ltd (dS)Medifinance (dS)Mediplus Co., Ltd (dS)Mercia Dental Equipment (dS)MestraMetrodentMillpond MillingMilnes BrosMouth Cancer Foundation (dS)MR Dental SuppliesNabertherm GmbHNational Dental SuppliesNeotek Ltd

Nobel Biocare UK Ltd (dS)One Vision Health (dS)Optident Ltd (dS)Orthodontic Technicians Association (UK)PanadentPark Cameras (dS)Planmeca (dS)Prestige DentalProfessional Vocational Training (dS)RA Accountants LLP (dS)RDT Technology - ValplastREITELRenishawRPS & ProdwaysSagemax SchottlanderSheraShofu UK (dS)Sirona Dental Systems (dS)Smart Optics Sensortechnik GmbhSMG3DSmile Imaging (dS)Snowbird Finance Ltd (dS)Southern Implants (dS)

SpinaliS Dental & Lab Stools (dS)StratasysStraumannTalon Metal & Crown Cutters (dS)TavomTechceram LtdTechnicare Dental Supplies LtdThomas Dornan PrintersTOC The Orthodontic CompanyTrihawk Europe (dS)UKDentistry Dental Supplies (dS)VertexVisiomed Sp. z o.o. (dS)VSDent (dS)WassermannWHWYirro-plus (dS)ZfxZhermackZirkonzahn

DTS 2015 Floorplan

Exhibitor StAnd no.

P5545

660615346F62245305110J55L75

5K70A61F72115K72132132

Members Lounge

F78B42303

100 & 205530508S72N60

40230523H52210510147D70C40E17

Members LoungeH20500P80K58M62530510308

P7513067014514833030

D95404140650H52636H52310610515H22N7250562008

340240

15300208P72E15400248L70F75200E23D42P60E64D0311520

618301L87236142345523

F50D82G60527640S55F60546E40B0554060512031

1224215

N50R50402306G90C22F20

D91530220

M6215

225335525634

M62S82

15F43S63115530B56

10115333

Exhibitor StAnd no. Exhibitor StAnd no. Exhibitor StAnd no. Exhibitor StAnd no. Exhibitor StAnd no.

(dS) denotes companies located in the co-located Dentistry Show that would also like to meet with dental lab owners and dental technicians (dS) denotes companies located in the co-located Dentistry Show that would also like to meet with dental lab owners and dental technicians New DTS 2015 exhibitorNew DTS 2015 exhibitor


Visit us on Stand DTS 42www.enigmalife.co.uk

The new denture teeth system

Inspired by nature, designed for living

DTS Lecture TheatreFriday 17th April - 14:00 to 15:00

Dr. Finlay Sutton & Mr Rowan Garstang presentBeyond Private Dentures - Offering Your Clients

Premium Aesthetics & Function.

Schottlander Hands-on WorkshopFriday 17th and Saturday 18th April, 11:30 to 13:00

Dr. Finlay Sutton & Mr Rowan Garstang presentImproving Denture Aesthetics & Function.

DTS_Ad_newspaper 3/3/15 12:25 PM Page 1

DS30 - optical scanning

Call 01453 524543 for more information or visit www.renishaw.com/dental

The DS30 scanner projects light patterns on to the object to be scanned and the digital surface is calculated from the image

data of two cameras. The use of advanced ‘blue light’ technology allows for quicker and more accurate scanning into narrow

and deep areas than conventional dental scanners.

Using only the smaller blue light wavelength, the scanner does not require a door, making it spacious, easy and quick to

access.

The blue light technology allows the scanner to produce images accurate to 10 microns.

Intelligent multi-view allows the selection of the best possible angles to acquire the required data. Impression scanning is fast

and accurate, allowing the digital manufacturing process to proceed without the need of a conventional model.

Renishaw plc Charfi eld, Wotton-under-Edge, Gloucestershire GL12 8SP United KingdomT +44 (0)1453 524524 F +44 (0)1453 524901 E [email protected]

www.renishaw.com

DS30 - optical scanner

• Renishaw Dental Studio powered by Exocad

• Low up-front investment with easy expansions for advanced features

• Fully open software - no fees to export STL data

• Free up-front training plus ongoing dedicated UK support

• High productivity - scan and design 8 shell copings in less than 8 minutes

DS30 blue light scanner and Renishaw Dental Studio CAD


We live in a very cosmetic world. As the importance of appearance continue to dominate society, the public are becoming ever more aesthetically aware of their smiles. As such, modern dentistry has seen a growing number of requests for purely cosmetic procedures, and aesthetic results are prioritised in a vast majority of routine treatments.

While it is of course essential to deliver the outcomes desired by patients, it is also important to remember that the teeth are not a solely cosmetic feature. They serve a very specific purpose, and any treatment performed must maintain or enhance their functionality as well as their aesthetics.

This is a topic that Julian Dorey, Owner of Kingsbridge Dental Laboratory, feels very passionately about, and he is keen to remind both dentists and dental technicians of the fundamentals of all treatment procedures they complete.

“In an attempt to achieve beautiful smiles, we rightly focus on the aesthetic outcome of restorations we produce and place,” he says. “However, the shape of the functional surfaces are usually left smoothed and rounded, instead of sharp. This compromises on the mechanical success of the teeth, and I think it is the functionality of the smiles we are creating that is sometimes overlooked. If we go into a restaurant and order steak and are given two spoons to eat it with, we would have problems. Teeth are primarily designed to break up food, and not just to look good.”

Julian will be speaking on the subject within the Lecture Theatre at the Dental Technology Showcase (DTS) 2015. The Dental Laboratories Association’s (DLA) flagship event, the show has changed its dates to Friday 17th and Saturday 18th April, at the NEC in Birmingham.

“Due to the change of dates for DTS 2015, I was delighted to be able to accept the invitation to speak at the next event. I run a functional occlusal course for dental technicians and dentists, so it follows that my presentation will be suitable for professionals in both roles. I would encourage

dentists and technicians who work together to attend the session together, in order to strengthen understanding between the two and enhance collaboration.

“I want to encourage delegates to consider the shapes they produce when restoring teeth, whether that is with regards to crowns, composite additions or other restorative materials. I believe there is a virtuous circle of increased function inducing increased beauty and decreasing overall forces. Focusing on the colours and transitions of our ceramics or composites is not the only factor in need of attention and I will show how functional surfaces can be an aid to better layering.

“My lecture will concentrate on the functional aspects of teeth, the morphology and how we can improve the function of teeth by creating sharpness. It is this sharpness that cuts through food, whereas rounded surfaces, like spoons, can only be made effective with with more force being applied. Increasing the forces increases the pressure on the natural teeth and our restorations.

“I will also blend this with some material information concerning all-ceramic dentistry, including zirconia an e. max. I think some all-ceramic materials are still associated with some bad press, but in my experience, this is not always justified. I hope to offer some best practice tips about the materials and design, to help address some of the misconceptions about them.

“Looking at a more philosophical side of dentistry, rather than just technical, I hope delegates find my session thought-provoking.”

Julian will be joined by a carefully selected line-up of speakers, including the likes of Stephen Green, Jonathan Bill, Sascha Hein and Phil Reddington to name but a few. A packed programme will bring you two days of inspiration, information and intrigue, with verifiable and non-verifiable CPD available throughout.

Additional learning opportunities at DTS 2015 will include the brand new CAD/CAM Theatre, located on the trade floor. Leading suppliers and manufactures will demonstrate their innovations, sharing their expertise and experience so that you may improve your understanding and make the most of the equipment on offer.

Also new to 2015 will be Launchpad UK, providing you with a first-chance look at the very latest products, materials and technologies to reach the UK dental market. Registrants will receive updates and details of what to expect from who, ensuring you can plan your visit to your best advantage.

Hands-on workshops, live demonstrations and an array of networking and socialising opportunities will be provided over the course of the two days as well, for all members of your team to enjoy.

Make sure you don’t miss out and register for free online today!

FUNCTION FIRST

Join Julian Dorey and a host of world renowned speakers at DTS 2015, register online at www.the-dts.co.uk/showtime

“i will Show how functionAl SurfAcES cAn bE An Aid to bEttEr lAyErinG”

Julian Dorey

Exhibitor Product CategoriesAbrasive / Rotary ToolsBredentColtene LtdDental WarehouseDental-Devices.co.uk / TriHawk BursMestraNational Dental SuppliesPrestige DentalShofu UKTechnicare Dental Supplies LtdTOC The Orthodontic CompanyTrihawk Europe

Anti-snoring AppliancesAcorn Polymers UK LtdJJ Thompson Ltd / Eurodontic Ltd

Associations / Charities / OrganisationsBridge2AidBritish Academy of Cosmetic DentistryBritish Association of Clinical Dental TechnologyDental Laboratories AssociationDental Technologists AssociationHeart your SmileMouth Cancer FoundationOrthodontic Technicians Association (UK)

BenchesBQEJohn Winter & TAVOMSchottlanderSpinaliS Dental & Lab Stools

Bench LightsMediplus Co., LtdMilnes Bros

BrushesCharming DentalMR. Dental Supplies LtdShofu UK

CAD / CAMAIDITE HIGH-TECHNICAL CERAMICS CO., LTDAmann Girrbach AGAme GroupAttenborough DentalBiomet 3iBredentBristol CAD/CAMBristol Crown CompanyCarestream DentalCarestream DentalConsilio3D LtdDB Lab SuppliesDEGOS Dental GmbHDentsply ImplantsDigital DentalDOCERAM Medical CeramicsElos Medtech ABEnvisionTECEOS - Electro Optical SystemsESM Digital SolutionsGC UKGoPrint3DHenry Schein DentalHeraeus KulzerHK 3D Printing LtdImetric 3DIvoclar VivadentKerrLaser Lines LtdLMI TechnologiesMediplus Co., LtdMillpond MillingNabertherm GmbHNobel Biocare UK LtdPanadentPlanmecaPro Cam Implants RenishawSagemaxSirona Dental Systems LtdSmart Optics Sensortechnik Gmbh

SMG3DSmile ImagingStratasysStraumannTechceram LtdWHWZfxZhermackZirkonzahn

Casting ApparatusGoPrint3DHK 3D Printing LtdJohn Winter & TAVOMREITEL

CeramicsCendres + MetauxCharming DentalDEGOS Dental GmbHDOCERAM Medical CeramicsGC UKHenry Schein DentalHeraeus KulzerJohn Winter & TAVOMMetrodentSagemaxSchottlanderShofu UKSirona Dental Systems LtdTechnicare Dental Supplies LtdZirkonzahn

Cobalt ChromiumDB Lab SuppliesDentaurumDentech DentalHK 3D Printing LtdMetrodentMillpond MillingZirkonzahn

Composites3M ESPEAbbey Dental SuppliesBirlesik Grup DentalBredentCendres + MetauxCharming DentalColtene LtdGC UKJohn Winter & TAVOMKerrMillpond MillingOptident LtdShofu UKSMG3DVSDentZhermack

CompressorsDental WarehouseMercia Dental EquipmentPlanmeca

CPD Education / TrainingBioHorizonsBirmingham Metropolitan CollegeBOC HealthcareBritish Association of Clinical Dental TechnologyCendres + MetauxConsult Search + SelectionIvoclar VivadentKFA Medical LtdKing’s College London Dental InstituteNobel Biocare UK LtdOrthodontic Technicians Association (UK)PanadentProfessional Vocational TrainingRDT Technology - ValplastSchottlanderStraumann

Crown & Bridge AppliancesBristol Crown CompanyCookson DentalDental-Devices.co.uk / TriHawk BursEOS - Electro Optical SystemsEuropa Dental Laboratories LtdHeraeus KulzerHK 3D Printing LtdJohn Winter & TAVOMMillpond MillingPanadentPrestige DentalStratasysTalon Metal & Crown CuttersZfxZirkonzahn

Denture Base MaterialsAcorn Polymers UK LtdBirlesik Grup DentalCentriGlaxoSmithKlineHenry Schein DentalHeraeus KulzerIvoclar VivadentKemdentMR. Dental Supplies LtdRDT Technology - ValplastSchottlanderZhermack

Denture MarkingAIDITE HIGH-TECHNICAL CERAMICS CO., LTD

Duplicating MachinesEnvisionTECGoPrint3DLaser Lines LtdPanadentREITEL

Dust & Fume ExtractorsDanvilleEvidentOptident LtdWassermann

Financial ServicesDentlab ManagerLloyds Banking GroupM Cubed Chartered AccountantsMedifinanceRA Accountants LLPSnowbird Finance LtdLease UK

Flasks & Dental PressesIvoclar VivadentRDT Technology - Valplast

FurnacesHenry Schein DentalIvoclar VivadentMestraMilnes BrosNabertherm GmbH

Furniture & PlanningBQESchottlanderSpinaliS Dental & Lab Stools

HandpiecesBioHorizonsMediplus Co., LtdMercia Dental EquipmentNational Dental SuppliesPlanmecaTechnicare Dental Supplies Ltd

ImplantsBioHorizonsBiomet 3iBredentCamlogCendres + Metaux

Dental-Devices.co.uk / TriHawk BursDENTSPLYDentsply ImplantsEOS - Electro Optical SystemsEuropa Dental Laboratories LtdHK 3D Printing LtdImplantium UK LtdMillpond MillingNobel Biocare UK LtdPanadentPrestige DentalPro Cam Implants Sirona Dental Systems LtdSouthern ImplantsStraumannZfx

InsuranceMedifinance

InvestmentsDentaurumGC UKSchottlanderZhermack

IT & WebsitesChrisadDental DesignDental FocusDentlab ManagerOne Vision Health

Laboratory Instruments & ToolsCookson DentalDental A2Z LtdDental WarehouseDental-Devices.co.uk / TriHawk BursDentech DentalGoPrint3DJJ Thompson Ltd / Eurodontic LtdLMI TechnologiesMestraMetrodentNabertherm GmbHNational Dental SuppliesPark CamerasTalon Metal & Crown CuttersTOC The Orthodontic Company

Laboratory MotorsMilnes Bros

Laboratory Software3ShapeAmann Girrbach AGBristol Crown CompanyConsilio3D LtdDentlab ManagerEvident LabsLabtrac SolutionsNobel Biocare UK LtdPlanmecaSirona Dental Systems LtdSmile Imaging

Laboratory Sundries3M ESPEAbbey Dental SuppliesDental WarehouseDentech DentalHenry Schein DentalJJ Thompson Ltd / Eurodontic LtdKemdentKerrMetrodentNational Dental SuppliesSchottlanderTechnicare Dental Supplies LtdTOC The Orthodontic Company

Lathes PolishingMestraMR. Dental Supplies LtdREITELWassermann

Marketing ServicesChrisadDental DesignDental FocusOne Vision HealthOrthodontic Technicians Association (UK)Thomas Dornan Printers

Media & PublicationsChrisadDental Practice JournalDental Tribune InternationalOrthodontic Technicians Association (UK)Park CamerasThomas Dornan Printers

Metals (Non Precious)DB Lab SuppliesDentaurumDentech Dental

Milling EquipmentBristol Crown CompanyConsilio3D LtdDEGOS Dental GmbHGoPrint3DHenry Schein DentalLaser Lines LtdPlanmecaSirona Dental Systems LtdTechceram LtdZfxPro Cam Implants

Model TraysAme GroupKemdentLaser Lines LtdMestraNeotek LtdTechnicare Dental Supplies Ltd

Mouthguard Equipment & MaterialsAcorn Polymers UK LtdDB Lab SuppliesJJ Thompson Ltd / Eurodontic LtdMilnes BrosRDT Technology - ValplastTOC The Orthodontic CompanyWHW

Orthodontic Products3ShapeAcorn Polymers UK LtdAme GroupCentriConsilio3D LtdDB Lab SuppliesDental WarehouseDentaurumEon AlignerEuropa Dental Laboratories LtdJJ Thompson Ltd / Eurodontic LtdKalabhai Karson Pvt LtdLaser Lines LtdStratasysTOC The Orthodontic CompanyWHW

PlastersGC UKKalabhai Karson Pvt Ltd

Polishing Products3M ESPEKemdentKerrOptident LtdWassermann

PorcelainHenry Schein DentalSchottlanderShofu UK

Precious Metal Recovery

Cookson DentalZirkonzahn

Precision AttachmentsCendres + MetauxCookson Dental

Prosthetics3M ESPEBioHorizonsCentriColtene LtdCookson DentalDental-Devices.co.uk / TriHawk BursDENTSPLYDentsply ImplantsElos Medtech ABEuropa Dental Laboratories LtdHenry Schein DentalMetrodentPrestige DentalPro Cam Implants RDT Technology - ValplastSchottlanderSouthern ImplantsStraumannWHWZfx

RecruitmentConsult Search + Selection

Sand BlastersDanvilleEvidentOptident LtdREITELWassermann

TeethAbbey Dental SuppliesAme GroupBirlesik Grup DentalBredentCentriDentsply ImplantsGlaxoSmithKlineHenry Schein DentalHeraeus KulzerMR. Dental Supplies LtdNational Dental SuppliesSchottlanderWHW

TrimmersNational Dental SuppliesREITEL

UltrasonicsAlkapharmColtene Ltd

UV Light BoxesCharming DentalMilnes Bros

Vacuum PumpsMercia Dental EquipmentWassermann

VibratorsKalabhai Karson Pvt Ltd

WaxCharming DentalKemdentMR. Dental Supplies LtdPrestige DentalSagemaxSchottlander

Welders & Soldering UnitsNational Dental Supplies


BristolCrownCoYour Digital Partner

17th & 18th April 2015, NEC Birminghamwww.the-dts.co.uk

VISIT US ONSTAND 132

SPECIAL OFFER: Try your first

at HALF PRICE, for both our loyal existing

customers and new ones!

We have the zirconias, the expertise and the service.

Highly popular, full contour crowns

made totally in premium grade

high translucency zirconia.

The original and our best open zirconia, also

with a 20% higher translucency

option available!

Our latest zirconia with exceptional

translucency. Fully anatomic or reduced for

porcelain addition.

Custom titanium

abutments.

The no-frills economy zirconia.

Quality from 3M based on years

of thorough research.

80% nano ceramic particles embedded

in a highly cured resin matrix.

Zirconia and Alumina from the original

manufacturers.

Zirconia from the Japanese

masters.

High quality CAD/CAM PMMA

for long term temporary use.

Call us now on 0117 977 3593 or visit www.bristolcrown.com

www.the-dts.co.uk17th & 18th April 2015NEC BirminghamFind us on stand 115

At the forefront of the quality and technology expected in today’s ever

evolving Laboratory market.

So call today!

01580 817000 [email protected]

Proud to represent some of the best quality manufacturers

from around the world!

Bracon Ltd

SUA2367 April 2015 Show Ad 128x178_FINAL.indd 1 10/03/2015 09:22

Help your patients eat, speak and smile with confi dence with the POLIGRIP® denture care regime.

Dentures contain surface pores which microorganisms can colonise.1 Good denture hygiene is therefore essential – but, because dentures are about 10 times softer than enamel,2 cleaning them with non-specialist products like

regular toothpaste can damage the surface.3

POLIGRIP® Denture Cleansers are proven to penetrate the biofi lm* and kill microorganisms within hard-to-reach surface pores.4 Available in a choice

of variants, POLIGRIP® Denture Cleansers are non-abrasive3 to clean5 the delicate denture material without scratching.3

CHGBI/CHPOLG/0006/15b

*In vitro single species biofi lm after 5 minutes soak.References: 1. Glass RT et al. J Prosthet Dent.

2010; 103(6): 384-389. 2. GSK Data on File, literature review. August 2013. 3. GSK Data on File, Fernandez et al. 2006.

4. GSK Data on File, Lux R. 2012. 5. GSK Data on File, April 2011. POLIGRIP is a registered trade mark of the GSK group of companies.

Come and visit us at DTS stand 610

SM6183 Poligrip Press 1/4 Ad - Denistry Show 6.indd 1 10/03/2015 17:16

CONSILIO3D LTD.Consilio3D, specialist

consultants in digital healthcare solutions, offer a unique 3D scanning system which digitally captures and stores your study models.

You don’t need to be IT savvy because utilising the perfect match of all initial IT training, Maestro3D digital dentistry software and 3D White Light scanner, we enable dental practices and laboratories to create in-house, clear brace’s for your patients, at a fraction of the cost of traditional systems on the market today. The Maestro hardware and software in combination with our 3D printing bureau services gives both practices and laboratories the optimal solution for starting small, and growing your business in the lucrative area of own brand clear brace provision. From supply of scanner through to a flexible scanning service. We can provide cloud point data or a full CAD model in a file format of your choice.

viSit uS At StAnd 40

BIRLESIK GRUP DENTAL LTDNatural colour blending through advance tooling and precise computer-controls of three coloured layers:

• Naturally occuring blue/white opalescence and fluorescence

• Canines darker mesially and more translucent laterally

• A wide range of Anterior and Posterior moulds

• Vitality across the 16 standard shades ranged A1-A4

• Excellent colour stability

• Guaranteed bonding to all denture bases

• Has CE 2292 and ISO 13485:2012 quality certificate

viSit uS At StAnd 5

MOUTH CANCER FOUNDATION

The Mouth Cancer Foundation is committed to raising awareness of mouth cancer.

Dental practices in the UK should be performing thorough mouth cancer checks on their patients. This quick, detailed examination takes just 2 minutes, yet very few patients are aware they should receive this at least once a year.

The charity’s Mouth Cancer Screening Accreditation Scheme is successfully raising awareness amongst both patients and dental practices by calling every dental practice in the UK to be carrying out a thorough head and neck examination as part of regular check-ups. The scheme is a ‘Two minutes to save a life’ screening protocol that every dentist should be able to include in their routine examinations in order to increase early detection rates and save lives.

Membership to the scheme costs £200 in the first year but dental practices joining us during DTS will get a £50 discount.”

viSit uS At StAnd l87

REITEL FEINWERKTECHNIK GMBHREITEL stands for stainless steel! The new ERGORET AQUA is designed for trimming and cutting under wet conditions, where

protection for health and clothes is requirement; it is especially useful when processing zirconium.

REITEL´s ROTOGRIND MINI and ROTOGRIND NT stainless steel grinders are available at very special offer. Come and see at the booth 605.”


CHRISADChrisad is the world’s largest & oldest dental marketing agency. For 3+ decades

we have guided thousands of dental practices in the United States, Canada & the United Kingdom to rapid, sustainable longterm growth.

We are a fully-equipped marketing firm whose offerings include branding, direct mail, web and more. Our localised, research-based strategies bring in more new patients while increasing referrals, treatment acceptance and existing patient retention. In 2014, we generated average growth of 14.46% for our 1600+ clients. Visit our booth to see what our unique integrated marketing can do for your practice and you will be entered to win an iPad in our raffle and will be eligible for one year of free Practice Management. With chrisad as your growth partner, there are no limits to your success!

viSit uS At StAnd S72

SNOWBIRD FINANCESnowbird Finance provide bespoke financial solutions for dental

professionals and their practices.

We offer equipment finance, practice finance, business & personal loans and vehicle finance with competitive low rates and flexible terms to suit your individual requirements. Visit us on stand C22 and pick up a £50 note flyer which you can redeem for a real £50 note when you take out your next equipment finance deal with us.

viSit uS At StAnd c22

The Dental Technology Showcase (DTS) has now been running for 12 years, and in that time has grown into a technical and business conference, and major trade exhibition, catering for the whole lab team.

With over 100 companies, DTS 2015 will be the largest and most diverse assembly of trade suppliers, service providers and professional organisations available to Lab Owners and Technicians at any UK event. Each and every exhibitor will have a new product, new idea or specialist advice while many will be showcasing the latest equipment or materials, the best offers and support services to help you and your team run a smarter, more efficient, and profitable dental business.

At DTS 2015 there are already 30 exhibitors that were not with us in 2014, so if you think you saw it all last year, then think again. New suppliers are highlighted on page 10 and 11 of this newspaper - please make sure you visit them and see what they have to offer, they may just have the solution you’ve been looking for!

Across the trade floor you will find manufacturers from around the world who are looking for a UK agent, distributor or wholesaler to help them take their product to market. If you offer these services to international companies then, again, please make the time to find out what they’re looking to introduce to the UK profession.

The success and expansion of DTS is down to thousands of proactive, passionate lab owners and technicians like you, utilising the event to meet the trade. Your support has created a marketplace for suppliers to showcase their portfolio of products and, in turn, from their support and investment we are able to improve and enhance the delegate experience each year by offering a more enriched clinical and business education programme for the profession, for FREE.

All the lab and technician membership bodies and regulatory organisations that will be present at DTS 2015 provide exceptional support to dental professionals, so please visit those relevant to you and find out how they can support your career and business.

This will be the biggest and, hopefully, best DTS yet – I hope you can make it. Register for your frEE place if you haven’t already done so by visiting: www.the-dts.co.uk/psguide or call 020 7348 5776.

Kind Regards

matt Stokes Show Manager, Dental Technology Showcase

DENTLAB MANAGERState of the art technology for your dental laboratory. You will easily register orders and do the invoicing in the end.

This software also includes all European Union requirements within the Health industry such as Traceability, Electronic Health Record, Quality Assurance, Back Up, Statement of Conformity, Deviations and Reports. Improve control over the workload in the overview ”Active orders”, as green or red lights will help you to prioritize. No more delayed orders!

Every technician will be able to see their work depending on what department they belong to. Pictures and information on every order will be shared effectively, automatic e-mailing of invoices is available.

An extended version was developed for greater labs and their needs. Production overview in detail in a calendar to help you forecast busy days, barcode functionalities, and reports on employee production in detail. Large Dental Laboratories can save important time on DLM Enterprise.”


BQENew -Comfort Move for your back in the future!

When designing the ComfortMove we focused on creating a combination of comfort, optimal support and freedom of movement. The 5cm thick upholstery provides equal pressure and prevents pressure points on the circulatory system, allowing for free blood flow in the legs.”

viSit uS At StAnd f72

PRODUCTS & SERVICES GUIDE


Come andsee us onstandH22

The latest IDS CAD/CAM

technology

Why choose Henry Schein Dental Laboratory:

A team of experts ready to help digitise your restorative process.Specialist support and advice on:·

CAD/CAMCrown & BridgeProsthetics

Nationwide technical support on software and hardware through field engineers.Large stock of digital, traditional materials and tooth ranges available.Same day dispatch.Free delivery with orders over £40.Education and business support services.6 month price plan available.

SPECIAL OFFERUp to 30% off consumables, teeth and equipment

or call 0800 0283168

for more information

Lab Focus Ad 178 x 128 Quark H22 _Layout 1 11/03/2015 11:06 Page 1

DENTSPLY IMPLANTS DENTSPLY Implants’ digital range,

ATLANTIS™ is a market leader in patient-specific prosthetics. The digital solution has played a pioneering role within the industry for 15 years, allowing dental technicians and clinicians the freedom to create the best possible patient outcomes while streamlining the treatment workflow.

The truly open solution is fully flexible and compatible with all major implant systems, freedom which shouldn’t be underestimated when matched with optimal clinical outcomes. The reliability of ATLANTIS cannot be questioned either, when faced with the facts; over 1.5million abutments sold globally, 85 compatible implant connections, and 33 published clinical studies and case reports.

Join the UK’s leading dental implant company and digital range at DTS. Find out about its latest developments and how the brand at the forefront of digital implant dentistry can improve your profitability and support your business growth.

Visit us at stand 130, or take a look at the website for more information: www.dentsplyimplants.com.


KERRFor over 120 years Kerr has been

developing and manufacturing a wide range of high quality dental products for your practice, which is our inspiration.

Visit stand P72 to see Bill Seddon demonstrating their new elementsfree obturation system has all the great benefits of the original Elements, plus it’s cordless!

viSit uS At StAnd P72

DEGOS DENTAL GMBHDEGOS Dental GmbH is a German company specializing in

CAD/CAM machines and high-quality milling materials for both copy-milling and CAD/CAM systems. DEGOS Dental products are available for:

Open CAD/CAM systems, Amann Girrbach®, Zirkonzahn®, Sirona®, Schütz Dental®, etc.

Beside our top Zirconia products, PMMA and Wax, DEGOS also offers highend-polymers like Acetal, PEEK, and

Fibra Comp, as well as chrome-cobalt blanks and carbide burs.

Our new highlights:• Zirconia HT-Anterior: as translucent as lithium-disilicate• PEEK: minimal friction, ideal for allergic patients• L-Temp MultiColor: highly esthetic with 20 colour layers• Fibra Comp: for permanent use, easy to mill and as stable

as steel

Meet our DEGOS Star Line:• 3D Strip Light Scanning Scanner with Exocad• Simultaneous five-axis milling machine with integrated

liquid cooling system• Speed Sintering Furnace with free programming

Further information on all machines and products are available upon request.


MEDIFINANCE LTDMedifinance’s team of highly experienced consultants will

be on hand to advise on all aspects of practice finance including the most tax efficient ways to purchase equipment, cars and other capital assets. Loans for tax payments, practice renovations and indeed purchasing the practice itself are all available from Medifinance.

viSit uS At StAnd P60

MR. DENTALThis year, MR. Dental has introduced a Fantastic New Range of laboratory and surgery products.

Here are few of our new products:

• Lathe Brushes

• Sovereign High Impact Material

• Soft Relining Material

• Modelling Waxes

• Duplicating Gels

• Medi-Debub (Debubblizer surfactant)

• Z4 Shock Heat Precision Investment Material

• Royale Elite Heat Cure Denture Base

• Diamond Burs

Plus many more. Visit our Stand 236. Check our NEW Online catalogue: www.mrdental.co.uk


LASER LINES LTD.The Stratasys Objet Eden260VS Dental Advantage is the ideal 3D

Printer for increased throughput for growing labs and is competitively priced.

For in-house production of dental models, orthodontic appliances and surgical guides, the Objet Eden260VS Dental Advantage delivers the lowest cost per part with the accuracy and consistency needed for fine details and complex surface geometries. Supports ALL Dental Materials - MED610, MED620, MED670 & MED690.


THE BRISTOL CROWN COMPANY

We have for many years operated a lab to lab service providing a range of quality CadCam zirconia products.

All our substructures are manufactured in our Bristol milling centre using medical grade isostatic zirconia and as technicians we pride themselves on providing excellent products and a great service to our fellow technicians.

We accept models for design and scan or can process the design files from your scanner.

Our latest product is SpectraMax, a zirconia with exceptional translucency. It is made from a fully bio compatible isostatic zirconia and at 600mpa it is much stronger than lithium disilicate but has the same translucency. It is suitable for any part of the mouth and can be used for single units and bridges (maximum 3 units)

Please come and see us at the show to arrange your 1st SpectraMax for free Please ring 0117 977 3593 or visit www.bristolcrown.com for more information.


THE ORTHODONTIC COMPANY (TOC)

Visit us on stand 634 where we will have many products on display and we will also have some excellent DTS show offers available.

The new TOC Laboratory catalogue will also be available to take a copy away with you.


CENDRES+METAUx UK

Cendres+ Métaux formed around 130 years ago in the precious metal refining business. For many years alloys and attachments provided the foundation for CMUK to become a modern comprehensive dental supplier.

Our product portfolio now includes Willi Geller Creation Ceramics, DESS implant components, Smile Line and DEKEMA with the latest additions of Pekkton® High Performance Polymer and Anaxgum. Yet we offer more!

Our CM Tech Studio, an unmatched state of the art education suite. With an enviable list of world class technicians and the UK’s best home-grown talent we offer some of the finest technical education in the UK.

Where else can you get photography, shade taking, composite, ceramics, social media and DEKEMA courses under one roof?

We are much more than an alloy & attachment supplier in 2015!

viSit uS At StAnd 100 & 205

NABERTHERM GMBHNABERTHERMS high-temperature

LHT 03/17 D furnace with a max. temperature of 1650 °C is perfectly suited for sintering translucent zirconia.

The special molybdenum-discilicide heating elements offer best possible protection against chemical interaction between charge/heating elements. The furnace controller can be freely programmed for the individual sintering of the zirconia material. The zirconia units are positioned in ceramic saggars. Up to three saggars with approx. 25 units each are stackable.

NABERTHERM’S high-temperature LHT 02/17 LB Speed sintering furnace, equipped with MoSi2 Super HT heating elements for a maximum operating temperature of 1650 °C, is perfectly suited for sintering translucent zirconia. The furnace is equipped with automatically drying function which is very important when using coloring liquids. The furnace has additionally a rapid cooling device and allows the table to automatically open stepwise for faster cooling. Depending on the charge and the type of saggars, processing can be accomplished within two hours.


ZIRKONZAHNAt this year’s Dental Technology

Showcase Zirkonzahn will be presenting its product novelties, just like the CAD/CAM System 1-TEC Wet Heavy Metal, the highly translucent and strong zirconia “Prettau® Anterior” and the new pre-coloured zirconia “Anatomic Coloured”!

Don’t miss the chance to take a look at Zirkonzahn’s latest developed products & news, new and unique course –opportunities and lots of other projects coming up soon!

We are looking forward to meeting YOU soon!


COOKSON DENTALWith an ever expanding product

range to both the Crown & Bridge and Prosthetic Laboratory, our aim is to supply the best quality products and service at competitive prices.

• Mattigold & EC Alloy ranges

• Platinum foil for PJC’s or Veneers

• 17ct Dental wire

• Sterngold Attachments including

• ERA, Tube Lock, Hader Bar and

• Implant analogues systems

• Dental Plasters and Investments

• Equipment, Tools and sundries

• Ceramco 3 Porcelain

• Kemdent Waxes and Acrylics

• Kaili & Maist Teeth by HUGE Dental

• Burs, Cutters, Discs and Polishing materials

• Scrap recovery service

See our latest Catalogue, packed full of new and existing products including our latest range of high quality yet competitively priced Maist teeth designed for both independent and private cases.

Order via our website at www.cooksondental.com or call us on Freephone 0800 289881


GOPRINT3DGoPrint3D will be

demonstrating the Form 1+ from Formlabs, a high definition, affordable, desktop 3D printer that produces high quality models at a low cost, allowing dentists to bring digital orthodontics in-house, saving time and money.

We will also be showcasing a High-Precision DepthPhase® scanner perfect for 3D data capture.


LABTRAC SOLUTIONSDesigned for Labs of any size Labtrac dental lab management software

offers the best way to manage your business, improve efficiency and focus on quality.

Our new range of products are backed with secure and affordable cloud services, allowing you collaboration with customers and partners anywhere in the world, 24/7.


NATIONAL DENTAL SUPPLIESCome to stand 345 and discuss our

offers on the Marathon Microtech range of Laboratory Micromotors. We also have start up deals on the Ruthinium range of private, independant and economy acrylic teeth. We manufacture separating solutions, duplicating gels and Laboratory cleaning liquids.


RDT TECHNOLOGY LTD (VALPLAST)Gold Tripoli - Valplast have formulated an exciting new pre-polishing compound,

Gold Tripoli. It reduces the stages used when polishing a Valplast flexible partial dentures by one and reduces the overall polishing time while still giving an even deeper lustre and high shine to the surface of the finished partial.

Care Kit

The care kit has been put together to include all of the items required to keep a patient’s Valplast® flexible partial denture looking and feeling like new. Supplied in a convenient, professional looking zip top presentation care kit bag.

Flexible Denture Brush

Specially developed to be used on Valplast® appliances. The bristles are made from 100% highest quality silicone. Soft enough to be safely used on Valplast® flexible partials but still strong enough to be effective. It is also ideal for patients with sensitive gums and is supplied in a convenient travel tube for safe storage.


AME GROUP LTD.In the medical and dentistry markets, AME have been providing fast accurate prototypes for use in surgery or fast orthodontics without

the fuss, cost and delay associated with other methods. “3D printing” is, in simple terms a way of producing a physical part quickly from a 3D generated model.

AME Group have been “3D Printing” for 18 years using different technologies and is only a small part of our complete service offering. Our team of product designers can develop your new and innovative product, our bank of 3D printers can produce your prototype and our model making team and low volume production facility can make your product reality. AME Group has the strength, experience and capacity to develop your new product from concept to market.


IMPLANTIUM UKImplantium UK presents the Implant Pilot a guided implant placement surgery system that is

designed to ensure a safer implant plan, which can be used with all implant systems.

The guide is specially designed according to the initial impression that is taken by the implant dentist this impression also allows our lab to create a life size model of your patient’s teeth so that restorative features can be designed and made prior to the actual implant placement.

The key part of a guided implant procedure is the use of a CT scan; this CT-scan will show the density and structure of a patients jaw bone so that our experienced implant surgeon can accordingly plan where the implant is going to be placed.

We also have the option of selecting the LAUNCHPAD route for the implant pilot so that you receive Digital Mentoring.

Visit us at Stand 08 to find out more.


CDGProJet 1200 is a new affordable 3D Printer which is ideal for Dental Labs. It is very fast, accurate and

offers ultra thin layers and very high resolution.

There is a choice of materials including a castable resin. CDG hold this equipment in stock to immediate delivery.


DS30 - optical scanning


The DS30 scanner projects light patterns on to the object to be scanned and the digital surface is calculated from the image

data of two cameras. The use of advanced ‘blue light’ technology allows for quicker and more accurate scanning into narrow

and deep areas than conventional dental scanners.

Using only the smaller blue light wavelength, the scanner does not require a door, making it spacious, easy and quick to

access.

The blue light technology allows the scanner to produce images accurate to 10 microns.

Intelligent multi-view allows the selection of the best possible angles to acquire the required data. Impression scanning is fast

and accurate, allowing the digital manufacturing process to proceed without the need of a conventional model.

Renishaw plc Charfi eld, Wotton-under-Edge, Gloucestershire GL12 8SP United KingdomT +44 (0)1453 524524 F +44 (0)1453 524901 E [email protected]

www.renishaw.com

DS30 - optical scanner

• Renishaw Dental Studio powered by Exocad

• Low up-front investment with easy expansions for advanced features

• Fully open software - no fees to export STL data

• Free up-front training plus ongoing dedicated UK support

• High productivity - scan and design 8 shell copings in less than 8 minutes

DS30 blue light scanner and Renishaw Dental Studio CAD



A truly open system delivered by a truly open partner

Authorized Reseller

[email protected] www.esmdigitalsolutions.com

UK: (020) 8816 7840 Ireland: (01) 808 4446

“3Shape provides the innovation and ESM provides the support and partnership to ensure you embrace

everything that Dental System can offer your business.”

NEW D2000 Scanner

D2000 Delivers 5 micron accuracy verified to

ISO 12836

Scan both arches together, no occlusion scan

27-line blue light technology for faster scanning

Full Colour Scanning

Meet ESM and see 3Shape’s latest

innovations for 2015 at Stand 140

For more information contact Straumann on 01293 651230 or visit www.straumann.com/connect2cares

What does efficiency mean to your business?• Introducing Straumann® CARES® X-Stream™ - the complete implant-based, single tooth, full prosthetic restoration in one step: 1 scan, 1 design and 1 delivery

• Directly veneerable Straumann® CARES® TAN abutment for a quick path to your final restoration

• New CARES® screw-retained bridges and bars increase treatment flexibility

• Ability to connect your CADCAM system to Straumann® CARES® Prosthetics – no additional investment or training required

Cost-effective workflow solutions. More than efficiency.

See us at Stand 220!

FOREFRONT OF INNOVATION ESM DIGITAL SOLUTIONS

ESM Digital Solutions is one of the UK’s leading providers of 3Shape CAD/CAM technology and we have been delivering these market leading solutions to Dental and Orthodontic Laboratories and Clinics across the country since 2007. Meet with us at Stand 140 and find out more about 3Shape’s latest innovations for 2015. We will be presenting 3Shape’s latest desktop scanning technology including the revolutionary D2000 5m, two-cast scanner as well as the full suite of Dental, Orthodontic and Implant planning software. We will also be presenting TRIOS, 3Shape’s groundbreaking intra-oral scanner which will enable your dentists to capture and send you accurate, detailed and reliable full colour digital impressions via 3Shape’s seamless ‘Communicate’ online platform. We are looking forward to meeting with you, learning about your vision and ambitions and working together to help you realise your goals.


PANADENTPanadent, established in 1968, prides itself on selling innovative quality products through education.

We are a specialist Agent for Vita, Sirona CAD/CAM , Dreve, Lampert and Rietel to name a few of our prestigious Manufacturers and we will featuring all their latest products on our stand.


STRAUMANNAs a global leader in implant, restorative and regenerative

dentistry, Straumann believe patients should only come into contact with safe, high-quality products.

“Quality” has always been a guiding principle when developing and manufacturing products based on innovation, precision, reliability and simplicity.


PRESTIGE DENTALPrestige Dental has developed a reputation for bringing together an extensive range of quality dental products under one banner.

It combines innovative new products with old favourites and prides itself on its diversity of products.

All Prestige Dental products are carefully selected and undergo rigorous investigation to ensure they conform to our high standards. These high standards have ensured the customer loyalty of which we are so justly proud.

We will continue to scour the international markets to ensure that the products that we offer our customers are at the forefront of dental technology. It is our policy to ensure that all customers’ requirements are fulfilled in terms of product quality, fitness for purpose, timeliness of delivery, subsequent customer service, CE marking and safety of product.


DIGITAL DENTALPlan for a brilliant future.

The digital dental revolution has already begun and 3D technology

is going to transform the entire field. Planmeca offer open CAD/CAM solutions for dentists and dental laboratories.

Planmeca CAD/CAM™ Chairside - ultra-fast and portable intraoral scanner , sophisticated design software and high-precision milling unit. The Planmeca CAD/CAM™ Lab solution includes a desktop lab scanner, a sophisticated design software suite and an accurate 5-axis milling unit.

See the unique Promax 3D CBCT and extra oral imaging system. 3D Endodontics, 3D Orthodontics, 3D Ultra Low Dose, 3D Facial Photo, 3D Model scanning and 4D Jaw Motion. Planmeca Romexis® 4.0, the first software in the world to combine 2D, 3D imaging and CAD/CAM in a fully digital workflow.

Understand all of the different connotations, learn how to integrate different data and see how it will affect your business. So you can plan for a brilliant future.

T: 0800 7565642 www.digitaldental.co.uk


AME GROUPIn the medical and dentistry markets, AME have been

providing fast accurate prototypes for use in surgery or fast orthodontics without the fuss, cost and delay associated with other methods.

“3D printing” is, in simple terms a way of producing a physical part quickly from a 3D generated model. AME Group have been “3D Printing” for 18 years using different technologies and is only a small part of our complete service offering.

Our team of product designers can develop your new and innovative product, our bank

of 3D printers can produce your prototype and our model making team and low volume production facility can make your product reality.

AME Group has the strength, experience and capacity to develop your new product from concept to market.


BEGO MEDICALCAD/CAM technology at the highest level

Being a pioneer of CAD/CAM technology and a specialist in digital processes, BEGO offers both: a vast variety of materials and processing techniques for every indication as well as high quality CAD/CAM crowns & bridges and CAD/CAM implant prosthetics. Based on BEGO’s decades of experience in alloy, there is a wide range of precious and non-precious metal alloys

available (as Wirobond®), as well as materials like BeCe® CAD Zirkon (ceramic), BeCe® Temp (colored plastic temporary restauration) and BEGO Titan Grade 5 (for individual abutments, bar restorations and screw-retained bridges). The production is based in the high-tech fabrication center in Bremen using a wide range of different procedures, for example Selective Laser Melting (SLM), CAD/Cast®, High Speed Cutting or Rapid Prototyping. With its latest innovation, the 3D printing system BEGO enables the manufacturing of high-performance plastic treatments in the dental laboratories.


AMANN GIRRBACHThe In-house Company

Keep the full value creation in-house

– this is what many companies want and not least dental laboratories. Amann Girrbach, one of the leading innovators and full-service provider in digital dental prosthetics, is championing the cause to enable a complete in-house process chain for its customers.

Its mission - the development and manufacture of system components which intermesh uninterruptedly to guarantee continuous working processes from A to Z. As a result labs profit from perfect quality frameworks, but also from efficiently arranged workflows, reproducibility and dependable processing. Thus, the Ceramill CAD/CAM system is one of the most versatile and technically adept on the market which incorporates 35 years’ experience and know-how in CNC and CAD/CAM. The high degree of inhouse production spanning the product idea, development and manufacture up to final assembly allows Amann Girrbach to adapt its systems to economic and dental-specific requirements right from scratch.


DENTLAB MANAGERYou can quickly register the orders, and follow the logistic in details, before payment in the end.

DentLab Manager has 400 users in Scandinavia an UK, and was made in association

with the Norwegian with the Norwegian Dental Association to cover EU-directives

DentLab Manager has 3 different versions that will be useful for labs at all sizes.

There are single units that use a basic versions as well as big labs that use all the modules such as barcoding and the extended logistic version with details on the departments many days ahead.

Check out the latest release that includes the customer portal. You can make the dentist enter the orders, and follow the progress in the portal.


HENRY SCHEIN DENTALExperience digital technology in action, ‘test drive’ the

latest dental innovations and find out more about the latest products and equipment. Talk to us today by visiting Henry Schein Dental on Stand H22 and discover everything you need to provide the best patient healthcare and discuss our aim of helping you run a successful and profitable practice.

Our strong partnerships with many of the world’s leading manufacturers means Henry Schein Dental can offer an outstanding range of consumables, essential surgery and decontamination equipment, right through to lasers, digital technology, servicing and practice software.

To support this extensive offering, Henry Schein Dental has teams of experienced specialists in every area, each dedicated to providing superior customer service, reliable delivery and unrivalled after-sales support. So whether you need help with a move to a digital workflow or want to know more about how laser technology can help you meet clinical challenges, Henry Schein Dental has everything you need to run a successful and profitable practice.

viSit uS At StAnd h22

The development and integration of CAD/CAM technology is fast becoming commonplace within modern dental laboratories. The many benefits of a digitised workflow ensure the delivery of a high quality and reliable

service, in turn encouraging trust and satisfaction from clients for increased referrals and business profits.

The speed and efficiency it offers for a wide variety of cases, enables a short turnaround for maximum productivity. The accuracy produced is unparalleled compared to traditional methods, increasing the precision of fit first time. What’s more, digital methods provide more robust security for data, while also improving communications with the dentist for better collaboration and a more successful clinical result.

With so many different options now available on the market, however, how do you choose which is right for you? What should you be looking for? Where should you be looking? What training or support will you need?

In his lecture at the Dental Technology Showcase (DTS) 2015, Stephen Green will attempt to answer some of these questions so that you may make the best decisions for your business. As owner of Stephen Green Dental Studio in Nottinghamshire, a leading laboratory in restorative crown and bridgework, Stephen has much experience with many different CAD/CAM technologies.

“My lecture will be about adopting new technology, exploring the variety of CAD/CAM options available to labs and how we as a business developed these technologies,” he says.

“I will look at why labs should consider digital technology if they haven’t already, the equipment available to them, what it does and where it is from. I will discuss where to look and what to look for, and how to review the options depending on delegates’ individual circumstances. After all, a one-man lab may not require the same technologies as a large operation, and it is important to choose the most appropriate piece of equipment for the business. As with any investment, the return achieved is an important aspect to think about even before purchase. With regards to this, I will share my experiences of CAD/CAM technology and how I measure the return on each piece of equipment I buy.”

For lab owners, the initial purchase or upgrade of CAD/CAM technologies also requires thought towards staff recruitment and training. Stephen also hopes to look at these areas and offer some advice and proven ideas to help you avoid any potential pitfalls.

“We have a predetermined recruitment and training processes we follow at Stephen Green Dental Studio with regards to digital technologies, and I hope to share this during my DTS lecture. I’ll also consider what has worked and not worked for us as a business in the past, so that delegates may gain ideas of how best to approach the subject in their own labs.”

Following on the theme, the brand new CAD/CAM Theatre at DTS 2015 will offer further insight into the various technological options on offer in dentistry. An array of leading manufacturers and suppliers will take to the stage to demonstrate the cutting-edge solutions they provide, sharing their own experiences and expertise to ensure you find the right product for you.

Also brought to you for the first time will be the exciting Launchpad UK. With its new dates of Friday 17th and Saturday 18th April, DTS 2015 will be ideally placed to introduce you to the very latest products, materials and equipment available in the UK. The experts will be on hand

to give you all the information you may need, and those who pre-register will receive updates and details of what to expect in the weeks leading up to the event, enabling you to plan your visit.

In addition to all this, verifiable CPD will be delivered throughout the lab-dedicated two-day programme in the Lecture Theatre, with demonstrations held by leading professionals in the Practical Theatre and hands-on sessions available in the Technicians Workshop. The outstanding speaker line-up will include those at the very forefront of the field including Jonathan Bill, Sascha Hein, Julain Dorey and Phil Reddington to name but a few. The extensive trade floor will also return from previous years, with more than 80 leading suppliers such as 3Shape, Biomet 3i, Cendres+Métaux, Heraeus Kulzer, Nobel Biocare, Straumann, amongst many other reputable names.

Remaining the Dental Laboratories Association’s (DLA) flagship event, DTS 2015 promises to deliver education, inspiration and networking opportunities for all dental technicians, clinical dental technicians and lab owners. Make sure you and your team don’t miss out by registering online for your free passes today!

Stephen Green

BRIDGING THEGAPIN DENTISTRy

register your team for frEE the-dts.co.uk/showtime

The ultimate meeting place for dental technicians and trade suppliers

Research and source from over 100 relevant companies on the exhibition floor

Access free hands-on and practical workshops covering the latest materials and techniques

Learn from world-renowned speakers

All lectures and seminars qualify for FREE vCPD

Bringing the latest product launches to the UK following IDS Cologne

New CAD/CAM Seminars

Network with over 2,000 fellow dental technicians

Connect with dentists from the co-located Dentistry Show

In Partnership with

Supported by:

Documents

SEE PAGE 4 SEE PAGES 10 & 11 SEE PAGES 14 -19 · latest materials and technologies available in the UK. Discover innovations designed to streamline your daily processes and enhance