Section 14 - General Methods and InstrumentationVolume 14.01, January 2005Healthcare Informatics

E1239-04 Practice for Description of Reservation/Registration-Admission, Discharge, Transfer (R-ADT) Systems for Electronic Health Record (EHR) SystemsE1284-97 Guide for Construction of a Clinical Nomenclature for Support of Electronic Health RecordsE1340-96 Guide for Rapid Prototyping of Computerized SystemsE1384-02A Practice for Content and Structure of the Electronic Health Record (EHR)E1467 Specification for Transferring Digital Neurophysiological Data Between Independent Computer SystemsE1633-02A Specification for Coded Values Used in the Electronic Health RecordE1713 Specification for Transferring Digital Waveform Data Between Independent Computer SystemsE1714-00 Guide for Properties of a Universal Healthcare Identifier (UHID)E1715-01 Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record SystemsE1744-04 Practice for View of Emergency Medical Care in the Electronic Health RecordE1762-95R03 Guide for Electronic Authentication of Health Care InformationE1769 Guide for Properties of Electronic Health Records and Record SystemsE1869-04 Guide for Confidentiality, Privacy, Access, and Data Security Principles for Health Information Including Electronic Health RecordsE1902-02 Specification for Management of the Confidentiality and Security of Dictation, Transcription, and Transcribed Health RecordsE1959-98 Guide for Requests for Proposals Regarding Medical Transcription Services for Healthcare InstitutionsE1985-98 Guide for User Authentication and AuthorizationE1986-98 Guide for Information Access Privileges to Health InformationE1987-98 Guide for Individual Rights Regarding Health InformationE1988-98 Guide for Training of Persons who have Access to Health InformationE2017-99 Guide for Amendments to Health InformationE2084-00 Specification for Authentication of Healthcare Information Using Digital SignaturesE2085-00A Guide on Security Framework for Healthcare InformationE2086-00 Guide for Internet and Intranet Healthcare SecurityE2087-00 Specification for Quality Indicators for Controlled Health VocabulariesE2117-00 Guide for Identification and Establishment of a Quality Assurance Program for Medical TranscriptionE2145-01 Practice for Modeling in Health InformaticsE2147-01 Specification for Audit and Disclosure Logs for Use in Health Information SystemsE2171-02 Practice for Rating-Scale Measures Relevant to the Electronic Health RecordE2182-02 Specification for Clinical XML DTDs in HealthcareE2183-02 Guide for XML DTD Design, Architecture and ImplementationE2184-02 Specification for Healthcare Document FormatsE2185-01 Specification for Transferring Digital Voice Data Between Independent Digital Dictation Systems and WorkstationsE2210-02 Specification for Guideline Elements Model (GEM)\MDocument Model for Clinical Practice GuidelinesE2211-02 Specification for Relationship Between a Person (Consumer) and a Supplier of an Electronic Personal (Consumer) Health RecordE2212-02A Practice for Healthcare Certificate PolicyE2344-04 Guide for Data Capture through the Dictation ProcessE2364-04 Guide to Speech Recognition Technology Products in Health Care

Volume 14.02, July 2005General Test Methods; Forensic Psychophysiology; Terminology; Conformity Assessment; Statistical Methods

D4356-84R02 Practice for Establishing Consistent Test Method TolerancesE0011-04 Specification for Wire Cloth and Sieves for Testing PurposesE0029-04 Practice for Using Significant Digits in Test Data to Determine Conformance with SpecificationsE0105-04 Practice for Probability Sampling Of MaterialsE0122-00 Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for a Characteristic of a Lot or ProcessE0141-91R03 Practice for Acceptance of Evidence Based on the Results of Probability SamplingE0161-00R04 Specification for Precision Electroformed SievesE0177-04E01 Practice for Use of the Terms Precision and Bias in ASTM Test MethodsE0178-02 Practice for Dealing With Outlying ObservationsE0228-95 Test Method for Linear Thermal Expansion of Solid Materials With a Vitreous Silica DilatometerE0289-04 Test Method for Linear Thermal Expansion of Rigid Solids with InterferometryE0323-80R04 Specification for Perforated-Plate Sieves for Testing PurposesE0444-98 Descriptions of Scope of Work Relating to Forensic Document ExaminersE0454-80R04 Specification for Industrial Perforated Plate and Screens (Square Opening Series)E0456-04 Terminology Relating to Quality and StatisticsE0473-04 Terminology Relating to Thermal Analysis and RheologyE0476-87R01 Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test)E0487-04 Test Method for Constant-Temperature Stability Of Chemical MaterialsE0502-84R00 Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup MethodsE0537-02 Test Method for The Thermal Stability Of Chemicals By Differential Scanning CalorimetryE0541-01 Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured BuildingE0548 Guide for General Criteria Used for Evaluating Laboratory CompetenceE0582-04 Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous MixturesE0620-04 Practice for Reporting Opinions of Scientific or Technical ExpertsE0651_E0651M-01 Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured BuildingE0659-78R00 Test Method for Autoignition Temperature of Liquid ChemicalsE0674-80R04 Specification for Industrial Perforated Plate and Screens (Round Opening Series)E0678-98 Practice for Evaluation of Technical DataE0680-79R05 Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous MaterialsE0681-04 Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)E0691-99 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test MethodE0698-05 Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa MethodE0699-03 Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building ComponentsE0789-95R01 Test Method for Dust Explosions in a 1.2-Litre Closed Cylindrical VesselE0793-01 Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning CalorimetryE0794-01 Test Method for Melting And Crystallization Temperatures By Thermal AnalysisE0799-03 Practice for Determining Data Criteria and Processing for Liquid Drop Size AnalysisE0831-03 Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical AnalysisE0860-97 Practice for Examining And Testing Items That Are Or May Become Involved In LitigationE0918-83R99 Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and PressureE0928-03 Test Method for Purity by Differential Scanning CalorimetryE0967-03 Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal AnalyzersE0968-02 Practice for Heat Flow Calibration of Differential Scanning CalorimetersE0994 Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and RecognitionE1020-96 Practice for Reporting IncidentsE1131-03 Test Method for Compositional Analysis by ThermogravimetryE1142-04 Terminology Relating to Thermophysical PropertiesE1169-02 Guide for Conducting Ruggedness TestsE1187-97 Terminology Relating to Conformity AssessmentE1224 Guide for Categorizing Fields of Capability for Laboratory Accreditation PurposesE1225-04 Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow TechniqueE1226-00E01 Test Method for Pressure and Rate of Pressure Rise for Combustible DustsE1231-01E01 Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable MaterialsE1232-02 Test Method for Temperature Limit of Flammability of ChemicalsE1260-03 Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering InstrumentsE1269-05 Test Method for Determining Specific Heat Capacity by Differential Scanning CalorimetryE1301-95R03 Guide for Proficiency Testing by Interlaboratory ComparisonsE1323-89R02 Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting DataE1325-02 Terminology Relating to Design of ExperimentsE1356-03 Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning CalorimetryE1363-03 Test Method for Temperature Calibration of Thermomechanical AnalyzersE1385-00 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Steam DistillationE1386-00 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Solvent ExtractionE1387-01 Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas ChromatographyE1388-00 Practice for Sampling of Headspace Vapors from Fire Debris SamplesE1389 Practice for Cleanup of Fire Debris Sample Extracts by Acid StrippingE1402-99 Terminology Relating to SamplingE1412-00 Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated CharcoalE1413-00 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace ConcentrationE1422-01 Guide for Test Methods for Forensic Writing Ink ComparisonE1445-03 Terminology Relating to Hazard Potential of ChemicalsE1458-92R01 Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask ReticlesE1459-92R98 Guide for Physical Evidence Labeling and Related DocumentationE1461-01 Test Method for Thermal Diffusivity by the Flash MethodE1488-02E01 Guide for Statistical Procedures to Use in Developing and Applying Test MethodsE1491-97R02 Test Method for Minimum Autoignition Temperature of Dust CloudsE1492-92R99 Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science LaboratoryE1515-03A Test Method for Minimum Explosible Concentration of Combustible DustsE1530-04 Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter TechniqueE1545-00 Test Method for Assignment of the Glass Transition Temperature by Thermomechanical AnalysisE1579 Guide for Ensuring Data Integrity in Highly Computerized Laboratory OperationsE1580-93R02 Guide for Surveillance of Accredited LaboratoriesE1582-04 Practice for Calibration of Temperature Scale for ThermogravimetryE1588-95R01 Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy\MDispersive SpectroscopyE1610-02 Guide for Forensic Paint Analysis and ComparisonE1617-97R02 Practice for Reporting Particle Size Characterization DataE1618-01 Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass SpectrometryE1620-97R04 Terminology Relating to Liquid Particles and AtomizationE1626-02 Guide for Including Government Procurement Requirements in ASTM DocumentsE1638-94R04 Terminology Relating to Sieve AnalysisE1640-04 Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical AnalysisE1641-04 Test Method for Decomposition Kinetics by ThermogravimetryE1658-04 Terminology for Expressing Conclusions of Forensic Document ExaminersE1719-05 Test Method for Vapor Pressure of Liquids by EbulliometryE1732-96AE01 Terminology Relating to Forensic ScienceE1738 Guide for Development of a Directory of Accredited Laboratories by an Accrediting BodyE1782-03 Test Method for Determining Vapor Pressure by Thermal AnalysisE1789-04 Guide for Writing Ink IdentificationE1824-02 Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under TensionE1843-96R03 Guide for Sexual Assault Investigation, Examination, and Evidence CollectionE1858-03 Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning CalorimetryE1860-02 Test Method for Elapsed Time Calibration of Thermal AnalyzersE1867-01 Test Method for Temperature Calibration of Dynamic Mechanical AnalyzersE1868-04 Test Method for Loss-On-Drying by ThermogravimetryE1877-00R05 Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition DataE1884 Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality SystemsE1904 Guide for General Criteria for a Supplier's Declaration of ConformityE1905 Guide for General Requirements for Assessment and Accreditation of Certification/Registration BodiesE1906 Guide for General Requirements for Bodies Operating Product Certification SystemsE1919-03 Guide for Worldwide Published Standards Relating to Particle and Spray CharacterizationE1952-01 Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning CalorimetryE1953-02 Practice for Description of Thermal Analysis ApparatusE1954-05 Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)E1964-98 Practice for Compiling and Writing TerminologyE1967-98R03 Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast MicroscopeE1968-98R03 Guide for Microcrystal Testing in the Forensic Analysis of CocaineE1969-01 Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and AmphetamineE1970-01 Practice for Statistical Treatment of Thermoanalytical DataE1981-98R04 Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate CalorimetryE1992-99B Terminology Relating to Terminology ManagementE1994-98R03 Practice for Use of Process Oriented AOQL and LTPD Sampling PlansE2000-05 Guide for Minimum Basic Education and Training of Individuals Involved in the Detection of Deception (PDD)

E2008-04 Test Method for Volatility Rate by ThermogravimetryE2009-02 Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning CalorimetryE2012-00 Guide for the Preparation of a Binary Chemical Compatibility ChartE2016-99R04E01 Specification for Industrial Woven Wire ClothE2019-03 Test Method for Minimum Ignition Energy of a Dust Cloud in AirE2021-01 Test Method for Hot-Surface Ignition Temperature of Dust LayersE2031-99R04 Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) ExaminationsE2035-05 Terminology Relating to Forensic PsychophysiologyE2038-99R04 Test Method for Temperature Calibration of Dielectric AnalyzersE2039-04 Test Method for Determining and Reporting Dynamic Dielectric PropertiesE2040-03 Test Method for Mass Scale Calibration of Thermogravimetric AnalyzersE2041-03 Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels MethodE2046-03 Test Method for Reaction Induction Time by Thermal AnalysisE2057-00 Specification for Preparation of Laboratory Analysis Requests In Sexual Assault InvestigationsE2062-00 Guide for PDD Examination Standards of PracticeE2063-00 Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) ExaminationsE2064-00 Guide for Minimum Continuing Education of Individuals Involved in the Psychophysiological Detection of Deception (PDD)E2065-02 Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) ExaminersE2069-00 Test Method for Temperature Calibration on Cooling of Differential Scanning CalorimetersE2070-03 Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal MethodsE2071-00R05 Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure DataE2079-01 Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and VaporsE2080-00 Guide for Clinical Psychophysiological Detection of Deception (PDD) Examinations for Sex OffendersE2092-04 Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical AnalysisE2113-04 Test Method for Length Change Calibration of Thermomechanical AnalyzersE2123-01 Practice for the Transmittal of Evidence in Sexual Assault InvestigationE2124-01 Practice for the Specification for Equipment and Supplies in Sexual Assault InvestigationsE2125-01 Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its AnaloguesE2154-01 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)E2159-01 Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical ExpertsE2160-04 Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning CalorimetryE2161-01 Terminology Relating to Performance Validation in Thermal AnalysisE2162-01 Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) Testing of Sex OffendersE2163-01 Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar ProgramsE2195-02E01 Terminology Relating to the Examination of Questioned DocumentsE2206-02 Method for Force Calibration Of Thermomechnical AnalyzersE2224-02 Guide for Forensic Analysis of Fibers by Infrared SpectroscopyE2225-02 Guide for Forensic Examination of Fabrics and CordageE2227-02 Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer ChromatographyE2228-02 Guide for Microscopic Examination of Textile FibersE2229-02 Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) DataE2253-03 Method for Enthalpy Measurement Validation of Differential Scanning CalorimetersE2254-03 Test Method for Storage Modulus Calibration of Dynamic Mechanical AnalyzersE2281-03 Practice for Process and Measurement Capability IndicesE2282-03 Guide for Defining the Test Result of a Test MethodE2285-03 Guide for Examination of Mechanical Checkwriter ImpressionsE2286-03 Guide for Examination of Dry Seal ImpressionsE2287-03 Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed TextE2288-03 Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document ExaminationsE2289-03 Guide for Examination of Rubber Stamp ImpressionsE2290-03 Guide for Examination of Handwritten ItemsE2291-03 Guide for Indentation ExaminationsE2292-04 Practice for Investigation of Investigating Carbon Monoxide Poisoning IncidentsE2324-04 Guide for PDD Paired TestingE2326-04 Practice for Education and Training of Seized-Drug AnalystsE2327-04 Practice for Quality Assurance of Laboratories Performing Seized-Drug AnalysisE2328-04 Terminology Relating to Seized-Drug AnalysisE2329-04 Practice for Identification of Seized DrugsE2330-04 Test Method for Determination of Trace Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS)E2331-04 Guide for Examination of Altered DocumentsE2332-04 Practice for Investigation and Analysis of Physical Component FailuresE2334-03 Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample

E2345-04 Practice for Investigating Electrical IncidentsE2347-04 Test Method for Indentation Softening Temperature by Thermomechanical AnalysisE2386-04 Guide for the Conduct of PDD Screening ExaminationsE2403-04 Test Method for Sulfated Ash of Organic Materials by ThermogravimetryF0311-97R02 Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane FiltersF0312-97R03 Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane FiltersF0328-98R03 Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical ParticlesF0649-01 Practice for Secondary Calibration of Airborne Particle Counter Using Comparison ProceduresF0658-00A Practice for Calibration of a Liquid-Borne Particle Counter Using an Optical System Based Upon Light Extinction

Volume 14.03, July 2005Temperature Measurement

E0001-03A Specification for ASTM Liquid-in-Glass ThermometersE0077-98R03 Test Method for Inspection and Verification of ThermometersE0100-03 Specification for ASTM HydrometersE0126-92R98 Test Method for Inspection and Verification of HydrometersE0207-00 Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature PropertiesE0220-02 Test Method for Calibration of Thermocouples By Comparison TechniquesE0230-03 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized ThermocouplesE0235-03 Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability ApplicationsE0344-02 Terminology Relating to Thermometry and HydrometryE0452-02 Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation ThermometerE0563-02E01 Practice for Preparation and Use of an Ice-Point Bath as a Reference TemperatureE0574-00 Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber InsulationE0585_E0585M-04 Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple CableE0601-81R97 Test Method for Comparing EMF Stability of Single-Element Base-Metal Thermocouple Materials in AirE0608_E0608M-00R04 Specification for Mineral-Insulated, Metal-Sheathed Base Metal ThermocouplesE0644-04 Test Methods for Testing Industrial Resistance ThermometersE0667-98R03 Specification for Mercury-in-Glass, Maximum Self-Registering Clinical ThermometersE0696-00 Specification for Tungsten-Rhenium Alloy Thermocouple WireE0710-86R97 Test Method for Comparing EMF Stabilities of Base-Metal Thermoelements in Air Using Dual, Simultaneous, Thermal-EMF IndicatorsE0780-92R98 Test Method for Measuring the Insulation Resistance of Sheathed Thermocouple Material at Room TemperatureE0825-98R03 Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human TemperatureE0839-96 Test Methods for Sheathed Thermocouples and Sheathed Thermocouple MaterialE0879-01 Specification for Thermistor Sensors for Clinical Laboratory Temperature MeasurementsE0988-96R02 Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium ThermocouplesE1061-01 Specification for Direct-Reading Liquid Crystal Forehead ThermometersE1104-98R03 Specification for Clinical Thermometer Probe Covers and SheathsE1112-00 Specification for Electronic Thermometer for Intermittent Determination of Patient TemperatureE1129_E1129M-98R02 Specification for Thermocouple ConnectorsE1137_E1137M-04 Specification for Industrial Platinum Resistance ThermometersE1159-98R03 Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and PlatinumE1256-95R01 Test Methods for Radiation Thermometers (Single Waveband Type)E1299-96R02 Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human TemperatureE1350-97R01 Guide for Testing Sheathed Thermocouples Prior to, During, and After InstallationE1502-98R03E01 Guide for Use of Freezing-Point Cells for Reference TemperaturesE1594-99 Guide for Expression of TemperatureE1652-03 Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples

E1684-00 Specification for Miniature Thermocouple ConnectorsE1750-02 Guide for Use of Water Triple Point CellsE1751-00 Guide for Temperature Electromotive Force (EMF) Tables for Non-Letter Designated Thermocouple CombinationsE1965-98R03 Specification for Infrared Thermometers for Intermittent Determination of Patient TemperatureE2181_E2181M-01 Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple CableE2251-03A Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids

Volume 14.04, July 2005Laboratory Apparatus; Degradation of Materials; SI; Oxygen Fire Safety

D2512-95R02 Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)E0041-92R04 Terminology Relating To ConditioningE0095-68R01 Specification for Cell-Type Oven With Controlled Rates of VentilationE0123-02 Specification for Apparatus for Determination of Water by DistillationE0124-94R05 Specification for Weighing and Drying Apparatus for Microchemical AnalysisE0128-99 Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory UseE0133-92R00E01 Specification for Distillation EquipmentE0144-94R01 Practice for Safe Use Of Oxygen Combustion BombsE0145-94R01 Specification for Gravity-Convection And\t Forced-Ventilation\t OvensE0147-61R01 Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl MethodE0175-82R99E01 Terminology of MicroscopyE0191-64R99E01 Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic CompoundsE0193-94R99 Specification for Laboratory Glass MicropipetsE0205-96R00 Specification for Glass and Oxygen Combustion FlaskE0210-63R99E01 Specification for Microscope Objective ThreadE0211-82R99E01 Specification for Cover Glasses and Glass Slides for Use in MicroscopyE0236-66R01E01 Specification for Apparatus For Microdetermination Of Alkoxyl GroupsE0237-02 Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)E0287-02 Specification for Laboratory Glass Graduated BuretsE0288-03 Specification for Laboratory Glass Volumetric FlasksE0319-85R03 Practice for the Evaluation of Single-Pan Mechanical BalancesE0438-92R01E01 Specification for Glasses in Laboratory ApparatusE0542-01 Practice for Calibration of Laboratory Volumetric ApparatusE0617-97R03 Specification for Laboratory Weights and Precision Mass StandardsE0632 Practice for Developing Accelerated Tests to Aid Prediction of the Service Life of Building Components and MaterialsE0671-98R04 Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory ApparatusE0672-87R01E01 Specification for Disposable Glass MicropipetsE0675-02 Specification for Interchangeable Taper-Ground Stopcocks And StoppersE0676-02 Specification for Interchangeable Taper-Ground JointsE0677-94R04 Specification for Interchangeable Spherical Ground JointsE0694-99 Specification for Laboratory Glass Volumetric ApparatusE0714-94R04 Specification for Disposable Glass Serological PipetsE0715-80R01 Specification for Gravity-Convection And Forced-Circulation Water BathsE0732-80R01E01 Specification for Disposable Pasteur-Type PipetE0733-80R99E01 Specification for 44.7--L Disposable Glass MicropipetsE0734-80R99E01 Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)E0784-89R00E01 Specification for Clamps, Utility, Laboratory, and Holders, Buret and ClampE0785-81R01 Specification for Crucibles, Ignition, Laboratory, MetalE0786-81R01 Specification for Dishes, Evaporating, PlatinumE0787-81R01E01 Specification for Disposable Glass Micro Blood Collection PipetsE0788-97R03 Specification for Pipet, Blood DilutingE0816-95R02 Test Method for Calibration of Pyrheliometers by Comparison to Reference PyrheliometersE0824-94R02 Test Method for Transfer of Calibration From Reference to Field RadiometersE0832-81R03 Specification for Laboratory Filter PapersE0890-94R04 Specification for Disposable Glass Culture TubesE0898-88R00 Method of Testing Top-Loading, Direct-Reading Laboratory Scales and BalancesE0911-98R04 Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) PlugsE0913-82R99 Method for Calibration of Reference Pyranometers With Axis Vertical by the Shading MethodE0920-97R03 Specification for Commercially Packaged Laboratory ApparatusE0921-97R03 Specification for Export Packaged Laboratory ApparatusE0923-97R03 Specification for Glass Westergen Tube, ReusableE0934-94R04 Specification for Serological Pipet, Disposable PlasticE0941-83R99 Test Method for Calibration of Reference Pyranometers With Axis Tilted by the Shading MethodE0960-93R03 Specification for Laboratory Glass BeakersE0961-97R03 Specification for Blood Sedimentation Tube, Wintrobe, Glass, ReusableE0969-02 Specification for Glass Volumetric (Transfer) PipetsE0982-94R04 Specification for Laboratory Glass Test TubesE1043-00 Specification for Pipets, Milk and Cream ExaminationE1044-96R01 Specification for Glass Serological Pipets (General Purpose and Kahn)E1045-00 Specification for Pipet, Sahli HemoglobinE1046-85R00E01 Specification for Glass Westergren Tube, DisposableE1047-85R00E01 Specification for Blood Sedimentation Tube, Wintrobe, Glass, DisposableE1048-88R99E01 Specification for Color-Coding Pipets or Containers Coated with AnticoagulantsE1092-91R00E01 Specification for Glass Micro Folin Pipet, DisposableE1093-91R00E01 Specification for Glass Prothrombin Pipet, DisposableE1094-04 Specification for Pharmaceutical Glass GraduatesE1095-99 Specification for Common Laboratory Glass FunnelsE1096-86R01E01 Specification for Laboratory Glass Separatory FunnelsE1133-86R00 Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government ProcurementsE1154-89R03 Specification for Piston or Plunger Operated Volumetric ApparatusE1157-87R01E01 Specification for Sampling and Testing of Reusable Laboratory GlasswareE1189-00 Specification for Micro-Burets (Koch Style)E1270-88R03 Test Method for Equal Arm BalancesE1272-02 Specification for Laboratory Glass Graduated CylindersE1273-88R03 Specification for Color Coding of Reusable Laboratory PipetsE1292-94R01 Specification for Gravity Convection and Forced Ventilation IncubatorsE1293-02 Specification for Glass Measuring PipetsE1377-99 Specification for Laboratory Glass Kjeldahl FlasksE1378-99 Specification for Laboratory Glass Multiple Neck Distilling/Boiling FlasksE1379-90R99E01 Specification for Laboratory Glass Dewar FlaskE1380-90R99E01 Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposible MicropipetsE1403-97R03 Specification for Laboratory Glass Boiling FlasksE1404-94R03 Specification for Laboratory Glass Conical FlasksE1405-98R03 Specification for Laboratory Glass Distillation FlasksE1406-95R99 Specification for Laboratory Glass Filter FlasksE1522-93R03 Specification for Autoclavable Protective Coatings on Laboratory GlasswareE1878-97R03 Specification for Laboratory Glass Volumetric Flasks, Special UseG0007-05 Practice for Atmospheric Environmental Exposure Testing of Nonmetallic MaterialsG0021-96R02 Practice for Determining Resistance of Synthetic Polymeric Materials to FungiG0024-05 Practice for Conducting Exposures to Daylight Filtered Through GlassG0029-96R02 Practice for Determining Algal Resistance of Plastic FilmsG0063-99 Guide for Evaluating Nonmetallic Materials for Oxygen ServiceG0072-01 Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched EnvironmentG0074-01 Test Method for Ignition Sensitivity of Materials to Gaseous Fluid ImpactG0086-98A Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen EnvironmentsG0088-90R97E01 Guide for Designing Systems for Oxygen ServiceG0090-98 Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural SunlightG0093-03E01 Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched EnvironmentsG0094-92R98 Guide for Evaluating Metals for Oxygen ServiceG0113-03 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic MaterialsG0114-98 Practice for Aging Oxygen-Service Materials Prior to Ignitibility or Flammability TestingG0120-01 Practice for Determination of Soluble Residual Contamination by Soxhlet ExtractionG0121-98R04 Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning AgentsG0122-96R02 Test Method for Evaluating the Effectiveness of Cleaning AgentsG0124-95R03 Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched AtmospheresG0125-00 Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous OxidantsG0126-00 Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched AtmospheresG0127-95R00 Guide for the Selection of Cleaning Agents for Oxygen SystemsG0128-02E01 Guide for Control of Hazards and Risks in Oxygen Enriched SystemsG0130-95R02 Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a SpectroradiometerG0131-96R02 Practice for Cleaning of Materials and Components by Ultrasonic TechniquesG0136-03 Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic ExtractionG0138-03 Test Method for Calibration of a Spectroradiometer Using a Standard Source of IrradianceG0141-03 Guide for Addressing Variability in Exposure Testing of Nonmetallic MaterialsG0144-01 Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a HighTemperature Combustion AnalyzerG0145-96R01 Guide for Studying Fire Incidents in Oxygen SystemsG0147-02 Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering TestsG0151-00 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light SourcesG0152-05 Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic MaterialsG0153-04 Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic MaterialsG0154-04 Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic MaterialsG0155-04A Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

G0156-02 Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure TestG0159-98 Tables for References Solar Spectral Irradiance at Air Mass 1.5: Direct Normal and Hemispherical for a 37|SD Tilted SurfaceG0160-03 Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil BurialG0166-00 Guide for Statistical Analysis of Service Life DataG0167-00 Test Method for Calibration of a Pyranometer Using a PyrheliometerG0169-01 Guide for Application of Basic Statistical Methods to Weathering TestsG0172-03 Guide for Statistical Analysis of Accelerated Service Life DataG0173-03 Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37|SD Tilted SurfaceG0175-03 Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency ApplicationsG0177-03 Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37|SD Tilted SurfaceG0178-03 Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic TechniqueG0179-04 Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering TestsG0183-05 Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers