SCREWS - MetallicsROUND TRI-DRIVE MACHINE SCREWS steel Zinc Introduced nationally by Metallics in 1994 An IndusTRY FIRsT! A free square drive bit with each jar of Tri-Drive Machine

11

A

SCREWS

www.metal l i cs .us

ROUND TRI-DRIVE MACHINE SCREWS

steel ZincIntroduced nationally by Metallics in 1994

An IndusTRY FIRsT!A free square drive bit with each jar of

Tri-Drive Machine Screws

Manufactured byavanti screw, inc.,A Metallics Affiliate

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

OnLYMETALLICs!

Slotted

Phillips

SquareDrive

Hex

Three drivesin one head!

PART# UPC# DIAMETER LENGTH WT. PER

PKG.STD. PKG./

MSTR. SLEEVESUGGESTED

TRADE LIST PRICE PERJTRM80 80003 6-32 ½ .28 100/500 5.86/cJTRM81 80004 6-32 ¾ .36 100/500 5.86/cJTRM63 80005 6-32 1 .43 100/500 6.36/cJTRM82 80006 6-32 1½ .58 100/500 7.44/cJTRM83 80007 6-32 2 .73 100/500 9.13/cJTRM15 78615 8-32 3/8 .34 100/500 8.70/cJTRM84 80008 8-32 ½ .45 100/500 8.70/cJTRM85 80009 8-32 ¾ .51 100/500 8.74/cJTRM86 80010 8-32 1 .65 100/500 8.76/cJTRM87 80011 8-32 1¼ .75 100/500 8.84/cJTRM88 80012 8-32 1½ .86 100/500 11.25/cJTRM89 80013 8-32 2 1.07 100/500 11.54/cJTRM16 81255 10-32 ¼ .49 100/500 4.96/cJTRM20 78620 10-32 3/8 .48 100/500 8.70/cJTRM33 80014 10-32 ½ .57 100/500 7.08/cJTRM92 78692 10-32 ¾ .70 100/500 9.50/cJTRM98 80015 10-32 1 .89 100/500 9.56/cJTRM69 78669 10-32 1¼ .95 100/500 10.50/cJTRM75 78675 10-32 1½ 1.12 100/500 11.25/cJTRM113 78611 10-32 2 1.39 100/500 13.50/cJTRM22 80016 ¼ -20 3/8 .95 100/500 12.19/cJTRM99 80017 ¼ -20 ½ 1.10 100/500 12.25/cJTRM100 80018 ¼ -20 ¾ 1.33 100/500 12.29/cJTRM101 80019 ¼ -20 1 1.58 100/500 14.55/cJTRM102 80020 ¼ -20 1¼ 1.77 100/500 17.71/cJTRM103 80021 ¼ -20 1½ 2.08 100/500 17.79/cJTRM104 80022 ¼ -20 2 2.62 100 22.68/calso available–tri-drive™ sheet metal screws other sizes and quantities available by request

In 1959, F. Michael Mola started Metallics Inc. As owner and CEO he was the originator of the TriDrive Screw in 1994 and in 1999 he developed the QuaDrive Screw. He is still active in our corporation here in 2018.

A

SCREWS

12 www.metal l i cs .us

Slotted

Phillips

SquareDrive

Hex


1000 PACK ROUND HEAD TRI-DRIVE

MACHINE SCREW KITS steel Zinc

drive bit included in each pack.


PKG.STD. PKG./


TRADE LIST PRICE PERTRM80M 27780 6-32 ½ 2.30 1000 56.69/mTRM81M 27781 6-32 ¾ 3.10 1000 57.29/mTRM63M 27763 6-32 1 3.80 1000 62.56/mTRM82M 27782 6-32 1½ 5.80 1000 66.31/mTRM83M 27783 6-32 2 6.80 1000 88.50/mTRM84M 27784 8-32 ½ 3.51 1000 84.29/mTRM85M 27785 8-32 ¾ 4.80 1000 85.03/mTRM86M 27786 8-32 1 6.00 1000 85.23/mTRM87M 27787 8-32 1¼ 7.00 1000 85.79/mTRM88M 27788 8-32 1½ 8.10 1000 88.00/mTRM89M 27789 8-32 2 10.30 1000 91.75/mTRM33M 27733 10-32 ½ 5.70 1000 87.38/mTRM92M 27792 10-32 ¾ 7.00 1000 92.50/mTRM98M 27798 10-32 1 8.90 1000 90.31/mTRM69M 27769 10-32 1¼ 9.50 1000 100.00/mTRM75M 27775 10-32 1½ 11.20 1000 112.50/mTRM113M 27813 10-32 2 13.90 1000 130.00/mTRM99M 27799 ¼ -20 ½ 11.00 1000 116.39/mTRM100M 27800 ¼ -20 ¾ 13.30 1000 119.13/mTRM101M 27801 ¼ -20 1 15.80 1000 138.35/mTRM102M 27802 ¼ -20 1¼ 17.70 1000 166.65/mTRM103M 27803 ¼ -20 1½ 10.80 1000 168.44/mTRM104M 27804 ¼ -20 2 25.60 1000 212.19/mother sizes and quantities available by request


★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

METALLICS“Growth Through Innovation”We believe Metallics has the largest ratio of

American made to foreign produced product of any other American fastener company.

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

SERVING THEELECTRICAL, PLUMBING, HEATING AND AIR CONDITIONING

DISTRIBUTOR MARKETPLACE

13

A

SCREWS


ROUND HEAD TRI-DRIVE MACHINE SCREW KITS

steel Zinc

Slotted

Phillips

SquareDrive

Hex



PKG.STD. PKG./


TRADE LIST PRICE PER

TRMK632(415 pcs) 76877

6-32 ½

2.53

50

48.98/ea kit

6-32 ¾ 506-32 1 756-32 1½ 1006-32 2 140#1 1 Square Power Bit 1

TRMK832(375 pcs) 76878

8-32 ½

2.50

75

39.85/ea kit

8-32 ¾ 758-32 1 758-32 1¼ 508-32 1½ 508-32 2 50#2 1 Square Power Bit 1

TRMK1032(600 pcs) 76879

10-32 ¼

3.92

200

47.03/ea kit10-32 ½ 20010-32 1 200

#3 2 Square Power Bit 1

TRMK1420(124 pcs) 76880

¼ -20 ½

2.08

35 pcs

22.25/ea kit

¼ -20 ¾ 30 pcs¼ -20 1 20 pcs¼ -20 1¼ 15 pcs¼ -20 1½ 12 pcs¼ -20 2 12 pcs

#3 2 Square Power Bit 1 pcother sizes and quantities available by request

drive bit included in each pack.Manufactured byavanti screw, inc.,A Metallics Affiliate

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

METALLICSAMERICA’S SOURCE FOR PREMIER ANDINNOVATIVE FASTENERS & ANCHORS

A

SCREWS


In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s!

ROUND HEAD SLOTTED/PHILLIPS/ COMBO MACHINE SCREWS

steel Zinc

Slotted

Phillips

SquareDrive

Hex

COnTInuEd On nEXT PAGE

ROUND HEAD SLOTTED/PHILLIPS/ ROUND HEAD SLOTTED/PHILLIPS/


PKG.STD. PKG./


TRADE LIST PRICE PERSLOTTEDJRM15SLT 28892 4-40 3/8 .16 100/500 5.10/cJRM30SLT 28894 4-40 ½ .20 100/500 5.30/cJRM46SLT 28900 4-40 ¾ .27 100/500 5.83/cJRM61SLT 28908 4-40 1 .30 100/500 7.68/cJRM73SLT 28911 4-40 1½ .38 100/500 12.38/cJRM3SLT 28899 6-32 ¼ .22 100/500 5.15/cJRM10SLT 28886 6-32 5/16 .23 100/500 5.35/cJRM39SLT 28898 6-32 5/8 .33 100/500 4.22/cJRM81SLT 28795 6-32 ¾ .34 100/500 4.08/cJRM82SLT 28796 6-32 1½ .56 100/500 4.05/cJRM107SLT 28887 6-32 3½ 1.19 100 12.38/cJRM144SLT 28891 6-32 4 1.41 100 31.07/cJRM4SLT 28902 8-32 ¼ .31 100/500 5.93/cJRM11SLT 28888 8-32 5/16 .34 100/500 4.28/cJRM136SLT 28797 8-32 5/8 .45 100/500 4.28/cJRM137SLT 28798 8-32 7/8 .57 100/500 5.15/cJRM87SLT 28799 8-32 1¼ .73 100/500 5.80/cJRM106SLT 28885 8-32 1¾ .98 100/500 9.53/cJRM89SLT 28800 8-32 2 1.08 100/500 9.53/cJRM90SLT 28801 8-32 2½ 1.27 100/500 10.34/cJRM91SLT 28802 8-32 3 1.58 100 12.00/cJRM108SLT 28864 8-32 3½ 1.74 100 12.25/cJRM23SLT 28804 8-32 4 2.01 100 15.90/cJRM12SLT 28918 10-24 5/16 .47 100/500 4.38/cJRM41SLT 28948 10-24 5/8 .53 100/500 5.19/cJRM34SLT 28943 10-24 7/8 .72 100/500 5.86/cJRM93SLT 28805 10-24 1 .81 100/500 5.86/cJRM94SLT 28806 10-24 1¼ .95 100/500 6.47/cJRM95SLT 28807 10-24 1½ 1.12 100/500 7.57/cJRM96SLT 28916 10-24 1¾ 1.22 100/500 8.64/cJRM127SLT 28808 10-24 3 1.97 100 13.40/cJRM312SLT 28936 10-24 3½ 2.29 100 15.00/cJRM150SLT 28925 10-24 4 2.57 100 17.25/cJRM152SLT 28927 10-24 5 2.29 100 19.75/cJRM154SLT 28929 10-24 6 4.09 100 26.05/cJRM13SLT 28919 10-32 5/16 .47 100/500 4.38/cJRM42SLT 28949 10-32 5/8 .64 100/500 5.19/cJRM125SLT 28843 12-24 2 1.99 100/500 11.00/cJRM133SLT 28816 ¼-20 5 5.95 100 29.75/cJRM134SLT 28817 ¼-20 6 6.52 100 36.88/cJRM35SLT 28896 5/16 -18 ½ 1.88 100/500 16.33/cJRM50SLT 28901 5/16 -18 ¾ 2.12 100/500 18.49/cJRM65SLT 28818 5/16 -18 1 2.70 100/500 18.49/cJRM38SLT 28820 5/16 -18 1½ 3.58 100/500 18.49/cJRM122SLT 28822 5/16 -18 2½ 5.15 100 28.50/cRM129SLT 10347 5/16 -18 3 6.00 100 29.53/cRM146SLT 13188 5/16 -18 4 7.15 100 66.00/cRM147SLT 13189 5/16 -18 5 8.12 100 47.81/cother sizes and quantities available by request †= Painted Ivory Heads, ‡= Painted White Heads

15

A

SCREWS



COnTInuEd


steel ZincSlotted

Phillips

SquareDrive

Hex ROUND HEAD SLOTTED/PHILLIPS/ ROUND HEAD SLOTTED/PHILLIPS/


PKG.STD. PKG./


TRADE LIST PRICE PERSLOTTEDJRM36SLT 71058 3/8 -16 ½ 3.03 100/500 22.19/cJRM51SLT 28826 3/8 -16 ¾ 3.43 100 25.31/cJRM66SLT 28827 3/8 -16 1 4.03 100 25.47/cJRM72SLT 28828 3/8 -16 1¼ 4.47 100 26.82/cJRM79SLT 28913 3/8 -16 1¾ 6.50 100 39.75/cJRM116SLT 28830 3/8 -16 2 6.54 100 33.42/cJRM123SLT 28831 3/8 -16 2½ 7.54 100 41.83/cJRM130SLT 28832 3/8 -16 3 4.34 50 47.72/cJRM135SLT 28833 3/8 -16 4 5.65 50 64.16/cJRM124SLT 28794 3/8 -16 5 6.98 50 143.74/cJRM53SLT 28834 ½-13 1 7.45 100 54.00/cJRM55SLT 28835 ½-13 1¼ 4.08 50 62.00/cJRM143SLT 28837 ½-13 2 12.20 100 84.38/cJRM56SLT 28838 ½-13 3 8.21 50 118.13/cJRM57SLT 28839 ½-13 3½ 2.08 25 123.75/cDOMESTIC STEEL ZINC – PHILLIPSJRMP66D 86196 3/8 -16 1 4.03 100/500 78.75/cJRMP78D 86198 3/8 -16 1½ 5.00 100/500 84.38/cPHILLIPSJRMP440 61097 4-40 ¼ .16 100/500 5.10/cJRMP117 61091 4-40 3/8 .17 100/500 6.93/cJRMP30 61098 4-40 ½ .26 100/500 5.30/cJRMP129 61094 6-32 5/8 .33 100/500 4.22/cJRMP5 61100 10-24 ¼ .45 100/500 4.35/cJRMP6 61102 10-32 ¼ .44 100/500 4.57/cJRMP112 61085 10-32 1¾ 1.30 100/500 8.80/cJRMP114 61088 10-32 2½ 1.79 100 10.60/cJRMP178 61096 12-24 3/8 .76 100/500 5.37/cJRMP111 61084 12-24 ½ .66 100/500 5.37/cJRMP45 61099 12-24 1 1.12 100/500 9.88/cJRMP52 61101 12-24 1½ 1.50 100/500 17.38/cJRMP125 61086 12-24 2 1.98 100 17.38/cJRMP67 61104 5/16 -18 2 4.55 100 24.47/cCOMBOJRM17 80023 6-32 3/8 .25 100/500 3.83/cJRM80 80024 6-32 ½ .27 100/500 4.22/cJRM81 80025 6-32 ¾ .34 100/500 4.08/cJRM63 80026 6-32 1 .42 100/500 4.54/cJRM68 80027 6-32 1¼ .49 100/500 4.96/cJRM82 80028 6-32 1½ .56 100/500 6.15/cJRM82I† 87682 6-32 1½ .56 100/500 16.80/cJRM82W‡ 87482 6-32 1½ .56 100/500 16.80/cJRM83 80029 6-32 2 .70 100/500 8.89/cJRM140 80030 6-32 2½ .86 100/500 9.31/cJRM142 80031 6-32 3 1.02 100 10.79/cother sizes and quantities available by request †= Painted Ivory Heads, ‡= Painted White Heads


A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERCOMBOJRM18 80032 8-32 3/8 .34 100/500 3.83/cJRM84 80033 8-32 ½ .40 100/500 4.28/cJRM85 80034 8-32 ¾ .51 100/500 4.57/cJRM86 80035 8-32 1 .60 100/500 5.15/cJRM87 80036 8-32 1¼ .73 100/500 5.80/cJRM88 80037 8-32 1½ .83 100/500 6.83/cJRM89 80038 8-32 2 1.08 100/500 9.53/cJRM90 80039 8-32 2½ 1.27 100/500 10.34/cJRM91 80040 8-32 3 1.58 100 12.00/cJRM23 81085 8-32 4 2.01 100 15.90/cJRM19 80041 10-24 3/8 .45 100/500 4.35/cJRM32 80042 10-24 ½ .52 100/500 4.38/cJRM92 80043 10-24 ¾ .67 100/500 5.19/cJRM93 80044 10-24 1 .81 100/500 5.86/cJRM94 80045 10-24 1¼ .95 100/500 6.47/cJRM95 80046 10-24 1½ 1.12 100/500 7.57/cJRM96 80047 10-24 2 1.39 100/500 9.53/cJRM97 80048 10-24 2½ 1.65 100 11.49/cJRM127 80049 10-24 3 1.97 100 13.40/cJRM20 80050 10-32 3/8 .48 100/500 4.35/cJRM33 80051 10-32 ½ .55 100/500 4.38/cJRM48 80052 10-32 ¾ .70 100/500 5.19/cJRM98 80053 10-32 1 .86 100/500 5.86/cJRM69 80054 10-32 1¼ .99 100/500 6.47/cJRM75 80055 10-32 1½ 1.14 100/500 7.57/cJRM113 80056 10-32 2 1.47 100/500 9.53/cJRM114 86114 10-32 2½ 1.79 100 10.60/cJRM22 80057 1/4-20 3/8 .90 100/500 5.88/cJRM99 80058 1/4-20 ½ 1.00 100/500 6.23/cJRM100 80060 1/4-20 ¾ 1.25 100/500 6.90/cJRM101 80061 1/4-20 1 1.54 100/500 7.88/cJRM102 80062 1/4-20 1¼ 1.78 100/500 8.03/cJRM103 80063 1/4-20 1½ 2.00 100/500 8.15/cJRM104 80064 1/4-20 2 2.52 100 11.00/cJRM105 81105 1/4-20 2½ 3.06 100 13.93/cJRM128 81110 1/4-20 3 3.58 100 14.60/cJRM132 81115 1/4-20 4 4.61 100 18.85/cJRM133 81116 1/4-20 5 5.95 100 36.93/cJRM134 81119 1/4-20 6 6.77 100 67.18/cJRM36 80065 3/8 -16 ½ 2.91 100/500 22.19/cJRM51 80066 3/8 -16 ¾ 3.43 100 25.31/cJRM66 80067 3/8 -16 1 4.03 100 25.47/cJRM72 80068 3/8 -16 1¼ 4.47 100 26.82/cJRM78 80069 3/8 -16 1½ 5.00 100 31.14/cJRM116 80070 3/8 -16 2 6.48 100 33.42/cJRM123 80071 3/8 -16 2½ 7.54 100 41.83/cJRM130 80072 3/8 -16 3 4.34 50 47.72/cJRM135 81120 3/8 -16 4 5.65 50 64.16/cRM137 10132 3/8 -16 6 16.05 100 156.97/cother sizes and quantities available by request †= Painted Ivory Heads, ‡= Painted White Heads


COnTInuEd


steel ZincSlotted

Phillips

SquareDrive

Hex ROUND HEAD SLOTTED/PHILLIPS/ ROUND HEAD SLOTTED/PHILLIPS/

17

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERJSRM50 80073 6-32 3/8 .24 100/500 10.05/cJSRM10 80074 6-32 ½ .29 100/500 12.30/cJSRM51 80075 6-32 ¾ .38 100/500 17.33/cJSRM11 80076 6-32 1 .44 100/500 18.42/cJSRM12 80077 6-32 1¼ .51 100/500 19.54/cJSRM13 80078 6-32 1½ .58 100/500 20.09/cJSRM14 80079 6-32 2 .72 100/500 22.31/cJSRM60 80080 8-32 3/8 .35 100/500 13.29/cJSRM15 80081 8-32 ½ .41 100/500 13.94/cJSRM61 80082 8-32 5/8 .43 100/500 15.61/cJSRM16 80083 8-32 ¾ .54 100/500 16.20/cJSRM17 80084 8-32 1 .64 100/500 16.71/cJSRM18 80085 8-32 1¼ .70 100/500 25.57/cJSRM19 80086 8-32 1½ .84 100/500 27.37/cJSRM20 80087 8-32 2 1.08 100/500 40.41/cJSRM21 80088 10-24 ½ .53 100/500 16.71/cJSRM71 80089 10-24 5/8 .59 100/500 17.00/cJSRM22 80090 10-24 ¾ .70 100/500 18.96/cJSRM23 80091 10-24 1 .84 100/500 22.31/cJSRM24 80092 10-24 1¼ 1.00 100/500 31.82/cJSRM144 85144 10-24 1½ 1.13 100/500 37.64/cJSRM74 80093 10-24 1¾ 1.27 100/500 41.61/cJSRM146 85146 10-24 2 1.43 100/500 46.01/cJSRM25 80094 10-32 ½ .57 100/500 16.71/cJSRM26 80095 10-32 ¾ .74 100/500 20.68/cJSRM27 80096 10-32 1 .87 100/500 24.51/cJSRM28 80097 10-32 1¼ 1.02 100/500 31.69/cJSRM33 83733 10-32 1½ 1.18 100/500 38.23/cJSRM148 85148 10-32 2 1.46 100/500 46.02/cJSRM29 80098 ¼-20 3/8 .67 100/500 35.68/cJSRM30 80099 ¼-20 ½ 1.01 100/500 41.87/cJSRM31 80100 ¼-20 ¾ 1.29 100/500 45.75/cJSRM32 80101 ¼-20 1 1.51 100/500 45.75/cJSRM85 80102 ¼-20 1¼ 1.80 100/500 46.01/cJSRM90 80103 ¼-20 1½ 2.07 100/500 63.59/cJSRM95 83795 ¼-20 2 2.60 100 86.14/cJSRM97 83797 ¼-20 2½ 2.83 100 131.25/cJSRM100 85100 ¼-20 3 3.70 100 118.34/cJSRM132 89232 ¼-20 4 2.38 50 161.01/cSRM136 12020 ¼-20 6 6.86 100 479.65/cJSRM133 85133 3/8 -16 ½ 2.86 100/500 106.01/cJSRM66 83766 3/8 -16 1 4.22 100 172.53/cJSRM134 85134 3/8 -16 1½ 5.20 100 178.97/cother sizes and quantities available by request

ROUND HEADSLOTTED MACHINE SCREWS

18-8 STAINLESSSlotted

Phillips

SquareDrive

Hex

SlottedSlotted

A

SCREWS


ROUND HEAD SLOTTED MACHINE SCREWS

BRASS


PKG.STD. PKG./


TRADE LIST PRICE PERJRMB75 83475 4-40 1 .31 100/500 13.57/cJRMB6 83406 6-32 3/8 .27 100/500 18.61/cJRMB61 80104 6-32 ½ .29 100/500 12.85/cJRMB62 80105 6-32 ¾ .37 100/500 15.71/cJRMB63 80106 6-32 1 .45 100/500 25.31/cJRMB64 83464 6-32 1¼ .53 100/500 27.18/cJRMB66 83466 6-32 2 .79 100/500 29.50/cJRMB140 83540 6-32 2½ .89 100/500 31.88/cJRMB77 83477 6-32 3 1.47 100/500 50.29/cJRMB8 83408 8-32 3/8 .34 100/500 19.54/cJRMB83 80107 8-32 ½ .43 100/500 16.59/cJRMB85 80108 8-32 ¾ .54 100/500 21.19/cJRMB86 80109 8-32 1 .61 100/500 26.57/cJRMB87 83487 8-32 1¼ .80 100/500 27.80/cJRMB88 83488 8-32 1½ .88 100/500 25.12/cJRMB91 80110 8-32 2 1.16 100/500 46.25/cJRMB90 83490 8-32 2½ 1.33 100/500 60.54/cJRMB78 83478 8-32 3 1.65 100/500 78.09/cJRMB7 83407 10-24 3/8 .45 100/500 23.27/cJRMB49 83449 10-24 ½ .58 100/500 24.80/cJRMB92 83450 10-24 ¾ .79 100/500 32.23/cJRMB93 83493 10-24 1 .84 100/500 37.64/cJRMB94 83494 10-24 1¼ .99 100/500 43.39/cJRMB96 83495 10-24 2 1.46 100/500 50.12/cJRMB1 83401 10-24 2½ 1.37 100/500 58.52/cJRMB103 83403 10-32 ¼ .41 100/500 8.06/cJRMB95 80111 10-32 ½ .57 100/500 30.43/cJRMB48 80112 10-32 ¾ .73 100/500 28.83/cJRMB98 80113 10-32 1 .91 100/500 30.83/cJRMB73 83473 10-32 1½ 1.35 100/500 44.44/cJRMB113 83537 10-32 2 1.46 100/500 57.32/cJRMB105 83529 10-32 2½ 1.80 100/500 66.98/cJRMB76 83476 12-24 ½ .75 100/500 29.94/cJRMB79 83479 12-24 ¾ .77 100/500 36.79/cJRMB80 83480 12-24 1 1.15 100/500 43.27/cJRMB22 83422 ¼ -20 3/8 .90 100/500 42.38/cJRMB99 83499 ¼ -20 ½ 1.00 100/500 49.05/cJRMB100 83524 ¼ -20 ¾ 1.32 100/500 53.91/cJRMB30 86268 ¼ -20 1 1.59 100/500 56.22/cJRMB102 83526 ¼ -20 1¼ 1.78 100/500 57.80/cJRMB104 83528 ¼ -20 2 2.52 100/500 107.40/c JRMB2 83402 ¼ -28 ½ 1.03 100/500 145.52/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

SlottedSlotted

Helpful Hints From Metallics: Did You forget to ask? GOT FASTENERS?

19

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERSILICON BRONZEJRM63SB 75663 6-32 1 .46 100/500 26.74/cJRM84SB 75684 8-32 ½ .48 100/500 23.32/cJRM85SB 83439 8-32 ¾ .54 100/500 49.82/cJRM86SB 75686 8-32 1 .74 100/500 33.74/cJRM88SB 75688 8-32 1½ .97 100/500 51.00/cJRM89SB 75689 8-32 2 1.26 100/500 62.19/cJRM93SB 75693 10-24 1 .94 100/500 43.01/cJRM95SB 75695 10-24 1½ 1.26 100/500 58.05/cJRM96SB 75696 10-24 2 1.65 100/500 76.71/cJRM33SB 75633 10-32 ½ .57 100/500 26.97/cJRM48SB 83433 10-32 ¾ .74 100/500 61.84/cJRM98SB 75698 10-32 1 1.04 100/500 43.01/cJRM79SB 83436 3/8 -16 1¾ 5.37 100 327.03/cNYLONJRMN84 72384 8-32 1 .21 100/500 28.13/cJRMN94 72394 10-24 1¼ .20 100/500 33.75/cJRMN99 72399 ¼-20 ½ .19 100/500 33.75/cJRMN102 72402 ¼-20 1¼ .24 100/500 39.38/cJRMN6 72306 5/16 -16 1 .23 50/250 253.13/cJRMN71 72371 5/16 -16 1¼ .27 50/250 337.50/cother sizes and quantities available by request

ROUND HEADSLOTTED MACHINE SCREWS

SILICON BRONzE • NyLONSlotted

Phillips

SquareDrive

Hex

SlottedSlotted

STOVE BOLTSsteel Zinc

standard Package square Plastic Jarround Head “Combo” (slotted and Phillips)

Machine screws with Hex nuts

Slotted

Phillips

SquareDrive

Hex

Two drivesin one head!


PKG.STD. PKG./


TRADE LIST PRICE PERRSB63 10488 6-32 1 .88 100/500 8.42/cRSB86 10491 8-32 1 .99 100/500 9.25/cRSB89 10492 8-32 2 1.30 100/500 14.28/cRSB90 10493 8-32 2½ 1.56 100/500 17.04/cRSB91 84291 8-32 3 1.83 100/500 19.41/cRSB94 10173 8-32 4 2.23 100/500 21.80/c RSB92 10466 10-24 ¾ .97 100/500 10.40/cRSB93 10158 10-24 1 1.14 100/500 12.03/cRSB95 10467 10-24 1½ 1.31 100/500 14.86/cRSB16 10340 10-32 ½ .86 100/500 6.01/cRSB17 10341 10-32 ¾ .98 100/500 6.62/cRSB18 10342 10-32 1 1.13 100/500 7.15/cRSB19 10343 10-32 1¼ 1.28 100/500 7.63/cother sizes and quantities available by request


A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERRSB20 10344 10-32 1½ 1.42 100/500 8.42/cRSB21 10345 10-32 2 1.72 100 9.82/cRSB22 10159 ¼ -20 3/8 1.58 100/500 7.29/cRSB99 10160 ¼ -20 ½ 1.67 100/500 7.66/cRSB100 10161 ¼ -20 ¾ 1.96 100/500 8.79/cRSB101 10162 ¼ -20 1 2.22 100/500 9.43/cRSB102 10163 ¼ -20 1¼ 2.42 100/500 10.56/cRSB103 10164 ¼ -20 1½ 2.68 100 11.87/cRSB104 10165 ¼ -20 2 3.22 100 14.19/cRSB105 13037 ¼ -20 2½ 3.98 100 16.67/cRSB106 13045 ¼ -20 3 4.30 100 21.48/cRSB66 10157 3/8 -16 1 5.67 100 39.35/cRSB72 10489 3/8 -16 1¼ 6.64 100 44.20/cRSB78 10490 3/8 -16 1½ 7.68 100 47.40/cRSB116 13038 3/8 -16 2 9.60 100 54.30/cother sizes and quantities available by request

COnTInuEd

STOVE BOLTSsteel Zinc

standard Package square Plastic Jarround Head “Combo” (slotted and Phillips)

Machine screws with Hex nuts

Slotted

Phillips

SquareDrive

Hex

Two drivesin one head!

STOVE BOLTS 18-8 STAINLESSSlotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERRSB100S 98800 ¼ -20 ¾ 2.07 100/500 59.99/cRSB101S 98801 ¼ -20 1 2.37 100/500 66.62/cRSB103S 98803 ¼ -20 1½ 2.79 100 79.41/cRSB104S 98804 ¼ -20 2 3.31 100 95.28/cother sizes and quantities available by request

Metallics Stands Tall Behind Authorized Distributors And Their Professional Users: Any product purchased from this catalogue may be returned within 30 days of purchase if our distributor, their contractor or customer is not fully satisfied with the quality.

Distributor–please include Metallics invoice with item, if deemed faulty or of poor quality. We will replace the individual item or issue full credit .

our goal is to please you. call to inquire about our return Merchandise agreement Policy.

AMERICA’S SOURCE FOR PREMIER & INNOVATIVE FASTENERS AND ANCHORS

Metallics Stands Tall Behind Authorized Distributors And Their Professional Users:

QUALITY GUARANTEED

21

A

SCREWS

www.metal l i cs .usCOnTInuEd On nEXT PAGE

ROUND HEAD PHILLIPS MACHINE SCREWS

18-8 STAINLESS

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJSRM11P 93511 6-32 1 .44 100/500 16.59/cJSRM13P 93513 6-32 1½ 1.27 100/500 18.07/cJSRM14P 93514 6-32 2 .72 100/500 20.09/cJSRM15P 93515 8-32 ½ .42 100/500 16.21/cJSRM17P 93517 8-32 1 .64 100/500 15.04/cJSRM19P 93519 8-32 1½ .86 100/500 24.61/cJSRM20P 93520 8-32 2 1.03 100/500 36.75/cJSRM21P 93521 10-24 ½ .55 100/500 38.32/cJSRM23P 93523 10-24 1 .84 100/500 38.81/cJSRM24P 93524 10-24 1¼ .99 100/500 47.98/cJSRM74P 93574 10-24 1¾ 1.32 100/500 51.20/cJSRM27P 93527 10-32 1 .89 100/500 22.06/cJSRM33P 93533 10-32 1½ 1.19 100/500 41.15/cJSRM148P 93648 10-32 2 1.53 100/500 41.45/cJSRM190P 85194 10-32 3 2.21 100 69.59/cJSRM100P 93600 12-24 ¾ .92 100/500 39.22/cJSRM101P 93601 12-24 1 1.13 100/500 49.85/cJSRM102P 93602 12-24 1½ 1.51 100/500 65.02/cJSRM30P 93530 ¼ -20 ½ 1.02 100/500 29.95/cJSRM31P 93531 ¼ -20 ¾ 1.31 100/500 33.94/cJSRM32P 93532 ¼ -20 1 1.62 100/500 41.15/cJSRM85P 93585 ¼ -20 1¼ 1.78 100/500 43.79/cJSRM90P 93590 ¼ -20 1½ 2.03 100/500 57.22/cJSRM95P 93595 ¼ -20 2 2.55 100/500 75.29/cJSRM137P 93637 3/8 -16 ¾ 3.66 100/500 257.93/cJSRM138P 93638 3/8 -16 1 4.22 100/500 183.55/cJSRM139P 93639 3/8 -16 1½ 5.39 100 380.29/cJSRM140P 93640 3/8 -16 2 6.49 100 445.49/cother sizes and quantities available by request


PKG.STD. PKG./


TRADE LIST PRICE PER18-8 STAINLESSJSPM344SS 84534 4-40 3/8 .14 100/500 10.75/cJSPM30SS 84530 4-40 7/16 .19 100/500 9.00/cJSPM6SS 84506 6-32 ¼ .21 100/500 5.57/cJSPM50SS 84550 6-32 3/8 .24 100/500 12.54/cJSPM8SS 84508 6-32 ½ .29 100/500 7.79/cJSPM9SS 84509 6-32 ¾ .35 100/500 8.97/cJSPM10SS 84510 6-32 1 .43 100/500 12.51/cJSPM11SS 84511 6-32 1¼ .51 100/500 13.38/cother sizes and quantities available by request

PAN HEAD SLOTTED MACHINE SCREWS

18-8 STAINLESS • BRASSSlotted

Phillips

SquareDrive

Hex

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PER18-8 STAINLESSJSPM12SS 84512 8-32 3/8 .36 100/500 8.85/cJSPM13SS 84513 8-32 ½ .44 100/500 10.30/cJSPM14SS 84514 8-32 ¾ .52 100/500 13.38/cJSPM15SS 84515 8-32 1 .63 100/500 12.38/cJSPM16SS 84516 10-24 ½ .55 100/500 13.98/cJSPM17SS 84517 10-24 ¾ .70 100/500 17.08/cJSPM18SS 84518 10-24 1 .83 100/500 22.23/cJSPM19SS 84519 10-32 ½ .59 100/500 15.00/cJSPM20SS 84520 10-32 1 .89 100/500 23.13/cJSPM28SS 84528 10-32 1¼ .96 100/500 27.25/cJSPM102SS 92281 12-24 ¾ .95 100/500 37.25/cJSPM103SS 92282 12-24 1 1.13 100/500 45.71/cJSPM104SS 92283 12-24 1¼ 1.33 100/500 44.75/cJSPM115SS 92294 ¼ -20 1½ 2.13 100/500 54.50/cBRASSJSPMB67 53167 4-40 ½ .21 100/500 9.88/cJSPMB99 53199 ¼ -20 ½ 1.02 100/500 52.50/cJSPMB100 53200 ¼ -20 ¾ 1.29 100/500 65.00/cJSPMB101 53201 ¼ -20 1 1.71 100/500 80.00/cJSPMB102 53202 ¼ -20 1¼ 1.80 100/500 125.00/cJSPMB103 53203 ¼ -20 1½ 2.07 100/500 137.50/cother sizes and quantities available by request

COnTInuEd

PAN HEAD SLOTTED MACHINE SCREWS

18-8 STAINLESS • BRASSSlotted

Phillips

SquareDrive

Hex


PAN HEAD PHILLIPSMACHINE SCREWS

steel Zinc

Slotted

Phillips

SquareDrive

Hex

PART# UPC# DIAMETER LENGTHWT. PER

PKG.STD. PKG./


TRADE LIST PRICE PERJPMP66 86310 4-40 ¼ .16 100/500 5.10/cJPMP118 85992 4-40 ½ .20 100/500 7.75/cJPMP119 85993 4-40 1 .40 100/500 9.00/cJPMP78 86312 6-32 ¼ .23 100/500 6.81/cJPMP80 86261 6-32 ½ .30 100/500 4.84/cJPMP81 86262 6-32 ¾ .34 100/500 6.70/cJPMP63 86263 6-32 1 .44 100/500 6.87/cJPMP82 86265 6-32 1¼ .49 100/500 9.89/cJPMP113 82296 6-32 1½ .56 100/500 10.58/cJPMP13 86278 6-32 2 .70 100/500 12.45/cJPMP4 86255 8-32 ¼ .34 100/500 5.99/cJPMP90 86276 8-32 3/8 .38 100/500 6.16/cJPMP84 86270 8-32 ½ .43 100/500 6.05/cJPMP43 86326 8-32 5/8 .50 100/500 5.75/cJPMP85 86271 8-32 ¾ .55 100/500 6.31/cJPMP86 86272 8-32 1 .66 100/500 6.40/cJPMP87 86273 8-32 1¼ .73 100/500 10.51/cother sizes and quantities available by request

23

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERJPMP88 86266 8-32 1½ .83 100 10.60/cJPMP89 86275 8-32 2 1.08 100 15.21/cJPMP39 86259 10-24 ½ .58 100/500 17.36/cJPMP37 86308 10-24 ¾ .65 100/500 17.85/cJPMP40 86319 10-24 1 .81 100/500 18.40/cJPMP42 86325 10-24 1¼ .95 100/500 19.75/cJPMP41 86323 10-24 1½ 1.14 100/500 21.55/cJPMP6 86257 10-32 ¼ .47 100/500 6.59/cJPMP20 86288 10-32 3/8 .56 100/500 6.05/cJPMP33 72033 10-32 ½ .61 100/500 11.93/cJPMP36 86307 10-32 ¾ .68 100/500 19.44/cJPMP1032 86234 10-32 1 .95 100/500 10.73/cJPMP69 86292 10-32 1¼ 1.05 100 14.99/cJPMP75 86294 10-32 1½ 1.27 100 11.83/cJPMP76 86295 10-32 1¾ 1.38 100 34.61/cJPMP114 86322 10-32 2 1.75 100 24.63/cJPMP5 85977 12-24 ½ .77 100 37.88/cJPMP38 86269 12-24 ¾ 1.00 100 39.56/cJPMP99 86298 ¼ -20 ½ 1.15 100/500 17.73/cJPMP100 86299 ¼ -20 ¾ 1.45 100/500 19.19/cJPMP101 86300 ¼ -20 1 1.62 100/500 27.59/cJPMP102 86301 ¼ -20 1¼ 1.92 100/500 28.03/cJPMP103 86302 ¼ -20 1½ 2.09 100 38.51/cJPMP104 86303 ¼ -20 2 2.67 100 39.48/cother sizes and quantities available by request

COnTInuEd

PAN HEAD PHILLIPSMACHINE SCREWS

steel Zinc

Slotted

Phillips

SquareDrive

Hex

PAN HEAD PHILLIPS MACHINE SCREWS

18-8 STAINLESS • 316 STAINLESS • BRASS

Slotted

Phillips

SquareDrive

Hex

Phillips


PKG.STD. PKG./


TRADE LIST PRICE PER18-8 STAINLESSJSPMP78SS 98978 6-32 ¼ .22 100/500 8.69/cJSPMP17SS 98917 6-32 3/8 .26 100/500 18.13/cJSPMP80SS 98980 6-32 ½ .30 100/500 18.29/cJSPMP15SS 98915 8-32 ½ .44 100/500 18.39/cJSPMP16SS 98916 8-32 ¾ .63 100/500 18.29/cJSPMP18SS 98918 8-32 1 .65 100/500 18.03/cJSPMP1SS 98901 8-32 1½ .86 100/500 19.49/cJSPMP20SS 98920 8-32 2 1.11 100/500 24.80/cJSPMP22SS 98922 8-32 2½ 1.27 100 19.73/cother sizes and quantities available by request


A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PER18-8 STAINLESSJSPMP21SS 98921 10-24 ½ .61 100/500 18.99/cJSPMP2SS 98902 10-24 ¾ .74 100/500 21.54/cJSPMP7SS 98907 10-24 1 .90 100/500 29.79/cJSPMP4SS 98904 10-24 1¼ 1.04 100/500 23.44/cJSPMP5SS 98905 10-24 1½ 1.15 100/500 26.57/cJSPMP30SS 98930 10-32 3/8 .54 100/500 13.72/cJSPMP33SS 98933 10-32 ½ .59 100/500 19.06/cJSPMP3SS 98903 10-32 ¾ .73 100/500 19.20/cJSPMP23SS 98923 10-32 7/8 .77 100/500 24.35/cJSPMP35SS 98935 10-32 1 1.02 100/500 24.30/cJSPMP36SS 98936 10-32 1½ 1.14 100 15.92/cJSPMP37SS 98937 10-32 2 1.60 100 33.13/cJSPMP38SS 98938 10-32 2½ 1.90 100 60.21/cJSPMP122434SS 99122 12-24 ¾ 1.00 100/500 13.55/cJSPMP29SS 98929 ¼ -20 3/8 1.01 100/500 26.57/cJSPMP102SS 98702 ¼ -20 1¼ 1.78 100/500 60.98/cJSPMP116SS 96116 ¼ -20 2½ 3.20 100 70.00/cJSPMP132SS 99132 ¼ -20 4 4.61 100 140.00/c316 STAINLESSJSPMP18SS316 14227 8-32 1 .65 100/500 20.00/cJSPMP21SS316 14225 10-24 ½ .61 100/500 22.00/cBRASSJPMP117BR 98717 4-40 3/8 .17 100/500 12.25/cJPMP12BR 79512 10-32 ½ .66 100/500 15.43/cJPMP100BR 86366 ¼ -20 ¾ 1.32 100/500 77.34/cJPMP101BR 86367 ¼ -20 1 1.63 100/500 91.71/cJPMP102BR 86368 ¼ -20 1¼ 1.71 100/500 114.71/cJPMP103BR 86369 ¼ -20 1½ 1.78 100/500 137.71/cother sizes and quantities available by request

COnTInuEd

PAN HEAD PHILLIPS MACHINE SCREWS

18-8 STAINLESS • 316 STAINLESS • BRASS

Slotted

Phillips

SquareDrive

Hex

Phillips

PAN HEAD SQUARE DRIVE MACHINE SCREWS

18-8 STAINLESS

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJSPS10SS 96510 8-32 ½ .40 100/500 13.69/cJSPS20SS 96520 8-32 ¾ .55 100/500 16.10/cJSPS40SS 96540 8-32 1¼ .77 100/500 20.70/cJSPS60SS 96560 8-32 2 1.12 100/500 35.65/cother sizes and quantities available by request

AMERICA’S SOURCE FOR PREMIER AND INNOVATIVEFASTENERS & ANCHORS

25

A

SCREWS


PAN HEAD PHILLIPS METRIC MACHINE SCREWS

STEEL zINC • 18-8 STAINLESS

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERSTEEL ZINCJMPMP36 79788 M3 6 .20 100 3.62/cJMPMP38 79790 M3 8 .22 100 3.70/cJMPMP310 79792 M3 10 .24 100 4.12/cJMPMP46 79789 M4 6 .36 100 7.20/cJMPMP48 79822 M4 8 .39 100 4.37/cJMPMP410 79824 M4 10 .41 100 4.12/cJMPMP412 79826 M4 12 .44 100 10.90/cJMPMP414 62917 M4 14 .47 100 15.04/cJMPMP420 79834 M4 20 .53 100 15.21/cJMPMP430 79844 M4 30 .58 100 16.15/cJMPMP58 62921 M5 8 .66 100 21.00/cJMPMP510 79854 M5 10 .71 100 21.10/cJMPMP512 79856 M5 12 .82 100 22.12/cJMPMP516 79860 M5 16 .86 100 9.91/cJMPMP520 79864 M5 20 .96 100 11.42/cJMPMP612 62923 M6 12 1.17 100 13.03/cJMPMP616 62927 M6 16 1.25 100 14.54/cJMPMP620 62931 M6 20 1.46 100 16.05/cJMPMP630 79938 M6 30 1.88 100 17.32/cJMPMP635 79939 M6 35 2.03 100 17.72/cJMPMP640 79940 M6 40 2.27 100 17.91/cJMPMP812 79905 M8 12 2.45 100 52.17/c18-8 STAINLESSJMPMP258SS 62913 M2.5 8 .15 100 3.38/cJMPMP38SS 62915 M3 8 .21 100 3.49/cJMPMP46SS 79820 M4 6 .35 100 5.63/cJMPMP510SS 62919 M5 10 .69 100 10.13/cJMPMP516SS 79916 M5 16 .86 100 14.63/cJMPMP830SS 79934 M8 30 .91 100 65.25/cother sizes and quantities available by request

OVAL HEAD PHILLIPS MACHINE SCREWS

18-8 STAINLESS


PKG.STD. PKG./


TRADE LIST PRICE PERJSRMO1 85094 8-32 1½ .84 100/500 17.68/cJSRMO2 85095 10-24 1½ 1.13 100/500 23.90/cJSRMO3 85096 10-32 1½ 1.18 100/500 25.43/cJSRMO44 85097 ¼ -20 1½ 2.07 100/500 42.30/cJSRMO5 85098 ¼ -20 2 2.60 100/500 52.20/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERJFM15 92019 4-40 3/8 .12 100/500 5.94/cJFM30 83830 4-40 ½ .18 100/500 5.94/cJFM46 83846 4-40 ¾ .23 100/500 6.52/cJFM61 92027 4-40 1 .25 100/500 7.14/cJFM73 92029 4-40 1½ .27 100/500 13.86/cJFM31 92020 5-40 ½ .21 100/500 6.36/cJFM38 92021 5-40 5/8 .23 100/500 6.72/cJFM47 83847 5-40 ¾ .23 100/500 6.72/cJFM62 83862 5-40 1 .33 100/500 7.50/cJFM3 83803 6-32 ¼ .18 100/500 5.15/cJFM10 92009 6-32 5/16 .21 100/500 5.15/cJFM17 83817 6-32 3/8 .21 100/500 3.91/cJFM80 80114 6-32 ½ .24 100/500 3.29/cJFM39 83839 6-32 5/8 .28 100/500 6.36/cJFM81 80115 6-32 ¾ .30 100/500 3.61/cJFM63 80116 6-32 1 .39 100/500 3.63/cJFM68 80117 6-32 1¼ .46 100/500 4.12/cJFM82 80118 6-32 1½ .53 100/500 5.59/cJFM79 83879 6-32 1¾ .62 100/500 2.91/cJFM83 80119 6-32 2 .62 100/500 6.65/cJFM140 80120 6-32 2½ .82 100/500 4.07/cJFM142 80121 6-32 3 .97 100/500 11.72/cJFM144 81916 6-32 4 1.28 100/500 31.07/cJFM4 92022 8-32 ¼ .20 100/500 4.54/cJFM11 92011 8-32 5/16 .22 100/500 4.54/cJFM18 83818 8-32 3/8 .27 100/500 4.12/cJFM84 80122 8-32 ½ .33 100/500 3.66/cJFM40 92023 8-32 5/8 .36 100/500 4.79/cJFM85 80123 8-32 ¾ .48 100/500 4.16/cJFM86 80124 8-32 1 .55 100/500 4.37/cJFM87 80125 8-32 1¼ .64 100/500 5.95/cJFM88 80126 8-32 1½ .77 100/500 6.65/cJFM106 83906 8-32 1¾ .87 100/500 9.95/cJFM89 80127 8-32 2 1.00 100/500 7.78/cJFM90 80128 8-32 2½ 1.25 100/500 12.36/cJFM91 80129 8-32 3 1.46 100/500 16.42/cJFM117 83917 8-32 4 1.94 100 28.72/cJFM5 92026 10-24 ¼ .26 100/500 4.54/cJFM19 83819 10-24 3/8 .38 100/500 4.94/cJFM32 83832 10-24 ½ .50 100/500 5.22/cJFM41 92024 10-24 5/8 .56 100/500 5.22/cJFM194 76594 10-24 ¾ .58 100/500 6.07/cJFM113 83913 10-24 1 .76 100/500 6.81/cJFM109 83909 10-24 1¼ .99 100/500 13.10/cJFM95 83895 10-24 1½ 1.04 100/500 10.56/cJFM107 92010 10-24 1¾ 1.28 100/500 10.56/cJFM96 83896 10-24 2 1.38 100/500 12.54/cJFM97 92035 10-24 2½ 1.89 100 12.54/cJFM127 83927 10-24 3 1.96 100 32.80/cJFM150 84430 10-24 4 2.51 100 28.73/cJFM152 92041 10-24 5 2.61 100 28.73/cJFM154 92043 10-24 6 2.87 100 54.63/cother sizes and quantities available by request

FLAT HEAD SLOTTEDMACHINE SCREWS

steel ZincSlotted

Phillips

SquareDrive

Hex

Slotted


27

A

SCREWS


COnTInuEd

FLAT HEAD SLOTTED MACHINE SCREWS

steel ZincSlotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJFM6 83806 10-32 ¼ .28 100 6.92/cJFM20 83820 10-32 3/8 .38 100/500 5.56/cJFM33 80130 10-32 ½ .50 100/500 4.67/cJFM42 83842 10-32 5/8 .56 100/500 4.92/cJFM48 80131 10-32 ¾ .73 100/500 4.92/cJFM98 80132 10-32 1 .76 100/500 5.16/cJFM69 80133 10-32 1¼ .96 100/500 6.78/cJFM92 81175 10-32 1½ 1.04 100/500 7.17/cJFM108 83908 10-32 1¾ 1.23 100/500 8.12/cJFM93 81176 10-32 2 1.41 100/500 9.04/cJFM94 81177 10-32 3 2.01 100/500 12.70/cJFM196 76596 12-24 ½ .59 100 5.48/cJFM9 83809 12-24 1 1.04 100 10.20/cJFM195 92050 12-24 1½ 1.36 100 12.70/cJFM76 83876 12-24 2 1.73 100 14.25/cJFM22 83822 ¼ -20 3/8 .69 100/500 9.37/cJFM99 80134 ¼ -20 ½ .89 100/500 7.78/cJFM44 92025 ¼ -20 5/8 .93 100/500 9.30/cJFM100 80135 ¼ -20 ¾ 1.06 100/500 8.24/cJFM101 80136 ¼ -20 1 1.30 100/500 9.49/cJFM102 83902 ¼ -20 1¼ 1.54 100/500 11.38/cJFM103 81900 ¼ -20 1½ 1.83 100/500 12.70/cJFM110 92012 ¼ -20 1¾ 1.98 100/500 17.05/cJFM104 80137 ¼ -20 2 2.55 100/500 13.25/cJFM128 83928 ¼ -20 2½ 2.81 100 16.33/cJFM105 81185 ¼ -20 3 3.38 100 17.82/cJFM131 92016 ¼ -20 3½ 4.02 100 30.60/cJFM132 84086 ¼ -20 4 4.41 100 37.72/cJFM133 92017 ¼ -20 5 5.21 100 47.85/cJFM134 92018 ¼ -20 6 6.74 100 61.05/cJFM35 83835 5/16 -18 ½ .95 100/500 25.24/cJFM50 83850 5/16 -18 ¾ 1.26 100/500 28.72/cJFM65 83865 5/16 -18 1 2.26 100/500 29.00/c JFM71 81897 5/16 -18 1¼ 2.46 100/500 29.00/cJFM77 81898 5/16 -18 1½ 2.73 100/500 29.25/cJFM115 81901 5/16 -18 2 2.81 100 32.65/cJFM122 81902 5/16 -18 2½ 2.90 100 32.65/cJFM129 76529 5/16 -18 3 5.70 100 57.82/cJFM36 83836 3/8 -16 ½ 2.06 100/500 36.68/cJFM51 83851 3/8 -16 ¾ 2.96 100/500 38.94/cJFM66 83866 3/8 -16 1 3.32 100 48.78/cJFM72 83872 3/8 -16 1¼ 3.80 100 48.83/cJFM78 83878 3/8 -16 1½ 5.41 100 55.85/cJFM116 83916 3/8 -16 2 6.47 100 42.28/cJFM123 83923 3/8 -16 2½ 6.94 100 75.99/cJFM130 84084 3/8 -16 3 8.19 100 89.08/cJFM135 84089 3/8 -16 4 2.76 25 83.20/cFM136 10302 3/8 -16 5 3.41 25 94.44/cFM137 10316 3

8 -16 6 4.08 25 119.50/cJFM114 92013 ½ -13 1 5.52 100 44.46/cother sizes and quantities available by request

A

SCREWS


FLAT HEAD SLOTTEDMACHINE SCREWS

BRASS • NyLON


PKG.STD. PKG./


TRADE LIST PRICE PERBRASSJFMB83 72883 8-32 ½ .35 100 17.64/cJFMB86 72886 8-32 1 .59 100 23.33/cJFMB87 72887 8-32 1¼ .68 100 16.68/cJFMB88 81155 8-32 1½ .84 100/500 33.20/cJFMB89 81156 8-32 2 1.05 100/500 37.00/cJFMB92 72892 10-24 ¾ .66 100 33.58/cJFMB98 72898 10-32 1 .79 100 40.21/cJFMB100 77600 ¼ -20 ¾ 1.14 100 55.47/cNYLONJFMN68 74568 6-32 1¼ .12 100/500 36.12/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

SlottedSlotted

FLAT HEAD SLOTTED MACHINE SCREWS

18-8 STAINLESS


PKG.STD. PKG./


TRADE LIST PRICE PERJFM63SS 91963 6-32 1 .39 100/500 19.91/cJFM82SS 91982 6-32 1½ .50 100/500 24.19/cJFM83SS 91983 6-32 2 .60 100/500 24.19/cJFM17SS 91917 8-32 3/8 .28 100/500 9.24/cJFM84SS 91984 8-32 ½ .35 100/500 11.18/cJFM97SS 91997 8-32 5/8 .41 100/500 11.06/cJFM85SS 91985 8-32 ¾ .45 100/500 14.01/cJFM95SS 91995 8-32 7/8 .52 100/500 20.78/cJFM86SS 91986 8-32 1 .56 100/500 18.01/cJFM110SS 93210 8-32 11/8 .60 100/500 25.37/cJFM87SS 91987 8-32 1¼ .67 100/500 30.50/cJFM92SS 91992 10-32 1½ 1.08 100/500 39.77/cJFM99SS 91999 ¼ -20 ½ .81 100/500 26.57/cJFM100SS 92000 ¼ -20 ¾ 1.08 100/500 39.22/cJFM101SS 93201 ¼ -20 1 1.32 100/500 44.56/cJFM102SS 93202 ¼ -20 1¼ 1.56 100/500 50.40/cJFM103SS 93203 ¼ -20 1½ 1.83 100/500 51.41/cJFM106SS 93206 ¼ -20 1¾ 2.12 100 67.58/cJFM104SS 93204 ¼ -20 2 2.55 100 78.29/cJFM107SS 93207 ¼ -20 2½ 2.89 100 94.08/cother sizes and quantities available by request

29

A

SCREWS


FLAT HEAD METRIC PHILLIPSMACHINE SCREWS

steel Zinc


PKG.STD. PKG./


TRADE LIST PRICE PERJMFMP416 60500 M4 (0.7) 16mm .36 100/500 6.10/cJMFMP425 60501 M4 (0.7) 25mm .51 100/500 10.20/cJMFMP58 60505 M5 (0.8) 8mm .37 100/500 10.20/cJMFMP516 60502 M5 (0.8) 16mm .56 100/500 9.20/cJMFMP525 60503 M5 (0.8) 25mm .80 100/500 12.20/cJMFMP540 60504 M5 (1.0) 40mm 1.18 100/500 16.30/cJMFMP610 60506 M6 (1.0) 10mm .59 100/500 13.30/cJMFMP616 60507 M6 (1.0) 16mm .78 100/500 11.20/cJMFMP850 60508 M8 (1.25) 50mm 3.77 100 50.00/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

other sizes and quantities available by request

FLAT HEAD PHILLIPS MACHINE SCREWSsteel Zinc


PKG.STD. PKG./


TRADE LIST PRICE PERJFMP80 84116 6-32 ½ .23 100/500 9.44/cJFMP81 84117 6-32 ¾ .33 100/500 3.61/cJFMP63 84063 6-32 1 .39 100/500 3.48/cJFMP68 84068 6-32 1¼ .46 100/500 12.12/cJFMP82 84118 6-32 1½ .54 100/500 13.73/cJFMP83 84119 6-32 2 .69 100/500 8.33/cJFMP140 85740 6-32 2½ .83 100/500 21.10/cJFMP142 85742 6-32 3 .99 100 22.65/cJFMP64 84064 6-32 4 1.03 100 21.00/cJFMP84 84120 8-32 ½ .33 100/500 4.03/cJFMP85 84121 8-32 ¾ .44 100/500 4.15/cJFMP86 84122 8-32 1 .55 100/500 5.80/cJFMP87 84123 8-32 1¼ .64 100/500 9.00/cJFMP88 84124 8-32 1½ .74 100/500 9.62/cJFMP89 84125 8-32 2 1.00 100/500 15.97/cJFMP70 84070 10-24 ½ .50 100/500 6.22/cJFMP75 84075 10-24 ¾ .48 100/500 6.72/cJFMP72 84072 10-24 1 .76 100/500 11.35/cJFMP30 72030 10-24 1¼ .90 100/500 13.42/cJFMP31 72031 10-24 2 1.41 100/500 20.31/cJFMP127 85727 10-24 3 2.01 100 27.94/cJFMP47 72047 10-32 3/8 .40 100/500 9.95/cJFMP49 72049 10-32 ½ .50 100/500 7.48/cJFMP48 72048 10-32 ¾ .60 100/500 7.55/cJFMP98 84134 10-32 1 .76 100/500 7.55/cJFMP69 84069 10-32 1¼ .96 100/500 15.18/cJFMP92 84128 10-32 1½ 1.04 100/500 15.83/cJFMP93 84129 10-32 2 1.41 100/500 17.42/cJFMP94 84130 10-32 3 2.01 100 21.54/cJFMP96 84132 10-32 4 1.36 100 19.60/cJFMP194 85794 12-24 ¾ .70 100/500 9.21/cJFMP22 72022 ¼ -20 3/8 .63 100/500 22.40/cJFMP100 85700 ¼ -20 ¾ 1.12 100/500 8.85/cJFMP103 84139 ¼ -20 1½ 1.77 100/500 20.72/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

A

SCREWS


FLAT HEAD MACHINE SCREW KITSsteel Zinc

several popular drive styles in assorted sizesPacked in a rigid plastic box with dividers

PART# UPC# DESCRIPTION OF CONTENTSWT. PER

PKG.STD. PKG./


TRADE LIST PRICEFMK632

10263370 pcs - 6-32 Flat Head Slotted

1.79 1/25 19.78/ea kit100 - ¾ , 75 - 1 , 75 - 1¼ , 50 - 1½ , 40 - 2 , 30 - 3

FMKP632

10356370 pcs - 6-32 Flat Head Phillips

1.84 1/25 19.92/ea kit100 - ¾ , 75 - 1 , 75 - 1¼ , 50 - 1½ , 40 - 2 , 30 - 3

FMK83210883

370 pcs - 8-32 Flat Head Slotted1.81 1/25 20.90/ea kit100 - ½ , 75 - ¾ , 75 - 1 , 50 - 1¼ ,

40 - 1½ , 30 - 2 other sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

PART#

FLAT HEAD

DESCRIPTION OF CONTENTS

SCREWS

370 pcs - 6-32

FLAT HEAD

PART# UPC# DESCRIPTION OF CONTENTS

FLAT HEAD PHILLIPS MACHINE SCREWS

18-8 STAINLESS


PKG.STD. PKG./


TRADE LIST PRICE PERJFMP64SS 93464 6-32 ¼ .17 100/500 4.12/cJFMP80SS 91980 6-32 ½ .20 100/500 6.06/cJFMP81SS 93481 6-32 ¾ .32 100/500 7.76/cJFMP63SS 93463 6-32 1 .39 100/500 10.05/cJFMP68SS 93468 6-32 1¼ .45 100/500 7.74/cJFMP82SS 93482 6-32 1½ .52 100/500 13.14/cJFMP83SS 93483 6-32 2 .69 100/500 13.20/cJFMP140SS 98440 6-32 2½ 2.34 100 18.47/cJFMP142SS 98442 6-32 3 1.03 100 21.54/cJFMP90SS 93490 8-32 2½ 1.17 100 25.50/cJFMP91SS 93491 8-32 3 1.40 100 31.83/cJFMP19SS 98500 10-24 3/8 .38 100/500 12.25/cJFMP70SS 93970 10-24 ½ .44 100/500 11.06/cJFMP71SS 93971 10-24 ¾ .58 100/500 14.34/cJFMP72SS 93972 10-24 1 .73 100/500 17.98/cJFMP49SS 93949 10-32 ½ .44 100/500 13.27/cJFMP50SS 93950 10-32 5/8 .53 100/500 13.86/cJFMP48SS 91948 10-32 ¾ .61 100/500 22.13/cJFMP51SS 93951 10-32 1 .77 100/500 22.58/cJFMP69SS 93469 10-32 1¼ .89 100/500 13.23/cJFMP92SS 93492 10-32 1½ 1.06 100 21.93/cJFMP93SS 93493 10-32 2 1.34 100 27.05/cJFMP94SS 93494 10-32 3 1.95 100 33.71/cJFMP99SS 93499 ¼ -20 ½ .78 100/500 14.75/cJFMP100SS 93500 ¼ -20 ¾ 1.15 100/500 26.77/cJFMP101SS 92280 ¼ -20 1 1.30 100/500 57.48/cJFMP103SS 98403 ¼ -20 1½ 1.83 100/500 39.45/cJFMP104SS 98404 ¼ -20 2 2.55 100 42.96/cJFMP107SS 98407 ¼ -20 2½ 3.03 100 94.08/cJFMP105SS 98405 ¼ -20 3 3.51 100 48.12/cJFMP65SS 93965 5/16 -18 1 2.08 100/500 55.72/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

31

A

SCREWS


TRUSS HEAD SLOTTED/PHILLIPS/ COMBO MACHINE SCREWS

steel Zinc

PART#

UPC# DIAMETER LENGTHWT. PER

PKG.STD. PKG./

MSTR. SLEEVESUGGESTED TRADE

LIST PRICE PERSLOTTEDJTMS1038 92895 10-32 3/8 .58 100/500 18.47/cJTMS33 92898 10-32 ½ .62 100/500 15.06/cJTMS14 92892 ¼-20 1 1.64 100/500 9.21/cJTMS86 92888 5/16-18 2 3.79 100 39.45/cPHILLIPSJTMP18 63718 8-32 3/8 .40 100/500 12.14/cJTMP84 63784 8-32 ½ .40 100/500 13.27/cJTMP85 63785 8-32 ¾ .53 100/500 15.24/cJTMP86 63786 8-32 1 .68 100/500 17.85/cJTMP87 63787 8-32 1¼ .79 100/500 18.50/cJTMP32 63732 10-24 ½ .57 100/500 2.96/cJTMP20 63720 10-32 3/8 .62 100/500 12.07/cJTMP33 63733 10-32 ½ .70 100/500 12.23/cJTMP48 63748 10-32 ¾ .81 100/500 13.45/cJTMP98 63798 10-32 1 .97 100/500 22.77/cJTMP69 63769 10-32 1¼ 1.19 100/500 42.02/cJTMP22 63722 ¼-20 3/8 .87 100/500 23.21/cJTMP99 63799 ¼-20 ½ 1.19 100/500 10.66/cJTMP100 63800 ¼-20 ¾ 1.40 100/500 25.38/cJTMP101 63801 ¼-20 1 1.69 100/500 30.52/cJTMP102 63802 ¼-20 1¼ 1.91 100 34.18/cCOMBOJTMSP143 92908 ¼-20 3 5.92 100 21.71/cJTMSP144 92909 ¼-20 4 4.85 100 25.07/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

PART#


PKG.STD. PKG./


LIST PRICE PERJTMS1SS 92893 ¼ - 20 1 1.68 100 180.59/cJTMS2SS 92894 ¼ - 20 2 2.67 100 180.59/cother sizes and quantities available by request

THUMB SCREWS18-8 STAINLESS


SOCKET SET SCREWS CUP TYPE ALLOy STEEL BLACk


PKG.STD. PKG./


TRADE LIST PRICE PERJSS614 65517 6-32 ¼ .12 100 8.75/cJSS638 65525 6-32 3/8 .16 100 9.80/cJSS612 65533 6-32 ½ .22 100 10.64/cJSS658 64451 6-32 5/8 .24 100 17.79/cJSS634 65549 6-32 ¾ .33 100 19.25/cother sizes and quantities available by request

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERJSS8316 65581 8-32 3/16 .19 100 8.05/cJSS814 65585 8-32 ¼ .15 100 8.40/cJSS8516 65589 8-32 5/16 .19 100 9.11/cJSS838 65593 8-32 3/8 .20 100 9.45/cJSS812 65601 8-32 ½ .31 100 11.13/cJSS858 65609 8-32 5/8 .38 100 15.47/cJSS834 65617 8-32 ¾ .42 100 18.83/cJSS81 65632 8-32 1 .62 100 26.25/cJSS24316 65651 10-24 3/16 .19 100 8.40/cJSS2414 65655 10-24 ¼ .14 100 8.47/cJSS24516 65659 10-24 5/16 .19 100 8.75/cJSS2438 65663 10-24 3/8 .23 100 9.11/cJSS2412 65671 10-24 ½ .31 100 10.85/cJSS2458 65679 10-24 5/8 .45 100 13.93/cJSS2434 65687 10-24 ¾ .74 100 15.89/cJSS2478 65694 10-24 7/8 .62 100 20.93/cJSS241 65702 10-24 1 .60 100 26.19/cJSS32316 65721 10-32 3/16 .14 100 8.40/cJSS3214 65725 10-32 ¼ .17 100 8.75/cJSS32516 65729 10-32 5/16 .21 100 8.89/cJSS3238 65733 10-32 3/8 .31 100 9.11/cJSS3212 65741 10-32 ½ .34 100 11.55/cJSS3258 65749 10-32 5/8 .45 100 12.81/cJSS3234 65757 10-32 ¾ .53 100 15.75/cJSS321 65772 10-32 1 .98 100 26.19/cJSS14316 65791 ¼ -20 3/16 .33 100 12.25/cJSS1414 65795 ¼ -20 ¼ .23 100 10.51/cJSS14516 65799 ¼ -20 5/16 .29 100 10.85/cJSS1438 65803 ¼ -20 3/8 .36 100 11.20/cJSS1412 65811 ¼ -20 ½ .49 100 12.95/cJSS1458 65819 ¼ -20 5/8 .45 100 16.45/cJSS1434 65827 ¼ -20 ¾ .77 100 20.31/cJSS1478 65834 ¼ -20 7/8 .66 100 23.11/cJSS141 65842 ¼ -20 1 .98 100 27.65/cJSS14114 65858 ¼ -20 1¼ 1.92 100 36.40/cJSS14112 65874 ¼ -20 1½ 2.31 100 41.93/cJSS51614 65921 5/16 -18 ¼ .33 100 17.23/cJSS516516 65925 5/16 -18 5/16 .40 100 14.71/cJSS51638 65929 5/16 -18 3/8 .52 100 15.05/cJSS51612 65937 5/16 -18 ½ .72 100 18.83/cJSS51658 65945 5/16 -18 5/8 .88 100 21.35/cJSS51634 65953 5/16 -18 ¾ .88 100 25.55/cJSS51678 65960 5/16 -18 7/8 .87 100 31.08/cJSS5161 65968 5/16 -18 1 1.22 100 37.03/cJSS3814 66047 3/8 -16 ¼ .25 100 27.44/cJSS3838 66055 3/8 -16 3/8 .28 100 19.32/cJSS3812 66063 3/8 -16 ½ .32 100 22.83/cJSS3858 66071 3/8 -16 5/8 .37 100 29.19/cJSS3834 66079 3/8 -16 ¾ .41 100 30.67/cJSS3878 66086 3/8 -16 7/8 .45 100 43.61/cJSS381 66094 3/8 -16 1 .49 100 50.83/cother sizes and quantities available by request

SOCKET SET SCREWS CUP TYPE ALLOy STEEL BLACk

COnTInuEd

33

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERJSS611SS 91411 6-32 3/16 .10 100/500 7.45/cJSS614SS 91414 6-32 ¼ .12 100/500 7.79/cJSS638SS 91423 6-32 3/8 .16 100/500 10.18/cJSS818SS 91433 8-32 1/8 .10 100/500 8.28/cJSS8316SS 91435 8-32 3/16 .12 100/500 7.10/cJSS814SS 91434 8-32 ¼ .15 100/500 7.10/cJSS838SS 91436 8-32 3/8 .20 100/500 8.97/cJSS2414SS 92872 10-24 1/8 .14 100/500 8.28/cJSS2438SS 92880 10-24 3/8 .23 100/500 9.49/cJSS2412SS 92870 10-24 ½ .31 100/500 11.36/cJSS3216SS 91304 10-32 3/16 .14 100/500 7.79/cJSS3214SS 92891 10-32 ¼ .17 100/500 7.79/cJSS32516SS 91305 10-32 5/16 .21 100/500 9.49/cJSS3238SS 91290 10-32 3/8 .31 100/500 9.63/cJSS3212SS 91291 10-32 ½ .34 100/500 10.67/cJSS3234SS 91292 10-32 ¾ .53 100/500 16.07/cJSS1414SS 91654 ¼-20 ¼ .23 100/500 8.97/cJSS14516SS 91655 ¼-20 5/16 .29 100/500 11.36/cJSS1438SS 91656 ¼-20 3/8 .36 100/500 13.05/cJSS14716SS 91657 ¼-20 7/16 .43 100/500 20.79/cJSS1412SS 91658 ¼-20 ½ .49 100/500 17.77/cJSS1434SS 91662 ¼-20 ¾ .77 100/500 28.78/cJSS142838SS 94263 ¼ -28 3/8 .36 100/500 17.37/cJSS51614SS 94004 5/16 -18 ¼ .33 100/500 27.23/cJSS516516SS 94005 5/16 -18 5/16 .40 100/500 16.59/cJSS51638SS 94006 5/16 -18 3/8 .52 100/500 20.15/cJSS516716SS 94007 5/16-18 7/16 .62 100/500 31.14/cJSS51612SS 94008 5/16-18 ½ .72 100/500 31.32/cJSS52438SS 93844 5/16-24 3/8 .56 100/500 17.44/cJSS52412SS 93846 5/16-24 ½ .77 100/500 22.22/cJSS52434SS 92905 5/16-24 ¾ 1.22 100/500 48.38/cJSS524112SS 93862 5/16-24 1½ 2.56 100/500 66.38/cJSS38516SS 94053 3/8-16 5/16 .57 100/500 23.63/cJSS3838SS 94054 3/8-16 3/8 .68 100/500 24.88/cJSS3812SS 94056 3/8-16 ½ 1.00 100/500 31.50/cJSS382438SS 94206 3/8-24 3/8 .75 100/500 24.75/cJSS382412SS 94208 3/8-24 ½ 1.06 100/500 31.75/cJSS382434SS 94212 3/8-24 ¾ 1.74 100/500 52.32/cJSS71612SS 94558 7/16-20 ½ 1.34 100/500 68.18/cJSS121312SS 92832 ½-13 ½ 1.57 100/500 68.85/cJSS121334SS 94261 ½-13 ¾ 2.75 100/500 74.93/cJSS12131SS 92831 ½-13 1 3.87 100/500 115.88/cother sizes and quantities available by request

SOCKET SET SCREWS CUP TYPE

18-8 STAINLESS

A

SCREWS

34 www.metal l i cs .usCOnTInuEd On nEXT PAGE


PKG.STD. PKG./


TRADE LIST PRICE PERJSSMSS43 90143 M4 6mm .13 100/500 13.37/cJSSMSS44 90144 M4 8mm .16 100/500 13.51/cJSSMSS45 90145 M4 10mm .20 100/500 15.41/cJSSMSS52 90152 M5 5mm .54 100/500 13.44/cJSSMSS53 90153 M5 6mm .15 100/500 13.37/cJSSMSS54 90154 M5 8mm .21 100/500 15.73/cJSSMSS55 90155 M5 10mm .27 100/500 16.52/cJSSMSS56 90156 M5 12mm .32 100/500 20.35/cJSSMSS63 92382 M6 6mm .21 100/500 16.00/cJSSMSS64 92383 M6 8mm .25 100/500 16.30/cJSSMSS65 92384 M6 10mm .34 100/500 16.43/cJSSMSS66 92385 M6 12mm .42 100/500 21.10/cJSSMSS68 92387 M6 20mm .73 100/500 28.18/cJSSMSS69 92388 M6 25mm .92 100/500 44.81/cJSSMSS84 94470 M8 8mm .45 100/500 25.23/cJSSMSS85 94471 M8 10mm .54 100/500 26.04/cJSSMSS86 94472 M8 12mm .68 100/500 33.23/cJSSMSS87 94473 M8 16mm .95 100/500 45.79/cJSSMSS88 94474 M8 20mm 1.23 100/500 51.89/cJSSMSS105 94491 M10 10mm .81 100/500 40.89/cJSSMSS106 94492 M10 12mm .95 100/500 45.03/cJSSMSS107 94493 M10 16mm 1.50 100/500 49.16/cJSSMSS109 94495 M10 25mm 2.40 100/500 86.61/cother sizes and quantities available by request

SOCKET SET METRICSCREWS CUP TYPE

18-8 STAINLESS

Slotted

Phillips

SquareDrive

HexSOCKET BUTTON HEAD CAP SCREWS

ALLOy STEEL BLACkHex


PKG.STD. PKG./


TRADE LIST PRICE PERJBSC614 66172 6-32 ¼ .20 100 7.18/cJBSC638 66174 6-32 3/8 .23 100 7.50/cJBSC612 66176 6-32 ½ .26 100 8.44/cJBSC634 66180 6-32 ¾ .31 100 8.87/cJBSC61 66170 6-32 1 .46 100 9.22/cJBSC814 66201 8-32 ¼ .31 100 8.13/cJBSC838 66023 8-32 3/8 .35 100 9.06/cJBSC812 66205 8-32 ½ .40 100 8.47/cJBSC834 66189 8-32 ¾ .47 100 9.22/cJBSC81 66184 8-32 1 .53 100 10.03/cJBSC8112 66185 8-32 1½ .61 100 14.73/cJBSC82 66186 8-32 2 .72 100 43.54/cJBSC1038 66232 10-24 3/8 .50 100 9.06/cJBSC1012 66234 10-24 ½ .54 100 9.69/cJBSC1034 66238 10-24 ¾ .69 100 11.88/cother sizes and quantities available by request

35

A

SCREWS


Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJBSC103212 66193 10-32 ½ .54 100 8.27/cJBSC103234 66195 10-32 ¾ .69 100 9.03/cJBSC10321 66191 10-32 1 .73 100 10.40/cJBSC1032112 66192 10-32 1½ .75 100 14.95/cJBSC10322 66194 10-32 2 .81 100 18.05/cJBSC1438 66261 ¼ -20 3/8 .93 100 10.56/cJBSC1412 66263 ¼ -20 ½ 1.07 100 12.44/cJBSC1458 66265 ¼ -20 5/8 1.14 100 13.75/cJBSC1434 66267 ¼ -20 ¾ 1.32 100 15.44/cJBSC141 66270 ¼ -20 1 1.59 100 18.75/cJBSC51638 66415 5/16 -18 3/8 1.35 100 22.81/cJBSC51612 66417 5/16 -18 ½ 1.40 100 22.50/cJBSC51658 66419 5/16 -18 5/8 1.55 100 23.13/cJBSC51634 66421 5/16 -18 ¾ 1.72 100 26.56/cJBSC51678 66423 5/16 -18 7/8 1.89 100 27.19/cJBSC5161 66424 5/16 -18 1 2.10 100 29.38/cother sizes and quantities available by request

COnTInuEd

SOCKET BUTTON HEAD CAP SCREWSALLOy STEEL BLACk

SOCKET FLAT HEAD CAP SCREWS ALLOy STEEL BLACk


PKG.STD. PKG./


TRADE LIST PRICE PERJFSC638 66570 6-32 3/8 .23 100 7.94/cJFSC612 66572 6-32 ½ .26 100 8.44/cJFSC658 66574 6-32 5/8 .28 100 8.75/cJFSC634 66576 6-32 ¾ .34 100 9.38/cJFSC838 66599 8-32 3/8 .35 100 7.81/cJFSC812 66601 8-32 ½ .40 100 8.56/cJFSC858 66603 8-32 5/8 .46 100 9.69/cJFSC834 66605 8-32 ¾ .51 100 10.94/cJFSC1038 66628 10-24 3/8 .50 100 8.13/cJFSC1012 66630 10-24 ½ .54 100 8.44/cJFSC1034 66634 10-24 ¾ .69 100 10.63/cJFSC101 66637 10-24 1 .83 100 12.19/cJFSC1412 66659 ¼ -20 ½ 1.07 100 13.75/cJFSC1458 66661 ¼ -20 5/8 1.14 100 14.06/cJFSC1434 66663 ¼ -20 ¾ 1.24 100 15.00/cJFSC141 66666 ¼ -20 1 1.59 100 18.44/cJFSC14114 66669 ¼ -20 1¼ 1.86 100 22.19/cJFSC14112 66673 ¼ -20 1½ 2.10 100 25.94/cJFSC51634 66817 5/16 -18 ¾ 1.72 100 24.38/cJFSC5161 66820 5/16 -18 1 2.10 100 30.25/cJFSC516114 66823 5/16 -18 1¼ 2.35 100 35.56/cJFSC516112 66827 5/16 -18 1½ 2.56 100 37.38/cother sizes and quantities available by request


Slotted

Phillips

SquareDrive

Hex

UPC#

A

SCREWS


COnTInuEd

SOCKET FLAT HEAD CAP SCREWS ALLOy STEEL BLACk


PKG.STD. PKG./


TRADE LIST PRICE PERJFSC3834 66971 3/8 -16 ¾ 2.12 100 39.06/cJFSC381 66974 3/8 -16 1 2.97 100 45.00/cJFSC38114 66977 3/8 -16 1¼ 3.05 100 50.25/cJFSC38112 66981 3/8 -16 1½ 3.56 100 54.38/cJFSC121 67128 ½ -13 1 3.15 100 79.69/cJFSC12112 67135 ½ -13 1½ 3.55 50 52.85/cJFSC122 67142 ½ -13 2 4.00 50 62.91/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex


SOCKET HEAD CAP SCREWS ALLOy STEEL BLACk

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJSHC614 67271 6-32 ¼ .27 100 9.70/cJSHC638 67273 6-32 3/8 .33 100 10.06/cJSHC612 67276 6-32 ½ .32 100 10.31/cJSHC658 67277 6-32 5/8 .38 100 11.19/cJSHC634 67279 6-32 ¾ .41 100 11.56/cJSHC61 67282 6-32 1 .63 100 12.19/cJSHC814 67300 8-32 ¼ .27 100 10.94/cJSHC838 67302 8-32 3/8 .42 100 11.19/cJSHC812 67304 8-32 ½ .47 100 11.56/cJSHC858 67306 8-32 5/8 .52 100 11.88/cJSHC834 67308 8-32 ¾ .58 100 12.56/cJSHC878 67310 8-32 7/8 .63 100 13.13/cJSHC81 67311 8-32 1 .92 100 13.44/cJSHC1038 67331 10-24 3/8 .42 100 10.06/cJSHC1012 67333 10-24 ½ .82 100 10.94/cJSHC1058 67335 10-24 5/8 .70 100 11.56/cJSHC1034 67337 10-24 ¾ .79 100 11.88/cJSHC1078 67339 10-24 7/8 .92 100 13.44/cJSHC101 67340 10-24 1 .98 100 14.06/cJSHC10114 67343 10-24 1¼ 1.13 100 15.75/cJSHC10112 67347 10-24 1½ 1.60 100 18.44/cJSHC10134 67351 10-24 1¾ 1.79 100 21.88/cJSHC102 67354 10-24 2 1.66 100 26.56/cJSHC1438 67360 ¼ -20 3/8 1.08 100 14.94/cJSHC1412 67362 ¼ -20 ½ 1.14 100 13.13/cJSHC1458 67364 ¼ -20 5/8 1.25 100 13.75/cJSHC1434 67366 ¼ -20 ¾ 1.38 100 15.06/cJSHC1478 67522 ¼ -20 7/8 1.52 100 16.06/cJSHC141 67523 ¼ -20 1 1.66 100 18.06/cJSHC14114 67526 ¼ -20 1¼ 1.92 100 20.94/cJSHC14112 67530 ¼ -20 1½ 2.31 100 24.38/cJSHC14134 67534 ¼ -20 1¾ 2.67 100 27.81/cJSHC142 67537 ¼ -20 2 3.02 100 32.75/cJSHC51612 67670 5/16 -18 ½ 2.09 100 25.94/cJSHC51658 67672 5/16 -18 5/8 2.18 100 26.25/cJSHC51634 67674 5/16 -18 ¾ 2.48 100 26.56/cother sizes and quantities available by request

37

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERJSHC51678 67676 5/16 -18 7/8 2.32 100 28.44/cJSHC5161 67677 5/16 -18 1 2.83 100 30.94/cJSHC516114 67680 5/16 -18 1¼ 3.31 100 35.63/cJSHC516112 67684 5/16 -18 1½ 3.91 100 42.06/cJSHC516134 67688 5/16 -18 1¾ 4.36 100 47.06/cJSHC5162 67691 5/16 -18 2 4.98 100 48.25/cJSHC516212 67698 5/16 -18 2½ 6.09 100 65.25/cJSHC3812 67824 3/8 -16 ½ 2.91 100 35.94/cJSHC3858 67826 3/8 -16 5/8 3.33 100 40.00/cJSHC3834 67828 3/8 -16 ¾ 3.80 100 40.63/cJSHC3878 67830 3/8 -16 7/8 4.02 100 46.81/cJSHC381 67831 3/8 -16 1 4.72 100 48.44/cJSHC38114 67834 3/8 -16 1¼ 5.20 100 54.06/cJSHC38112 67838 3/8 -16 1½ 5.47 100 60.25/cJSHC38134 67842 3/8 -16 1¾ 5.74 100 70.06/cJSHC382 67845 3/8 -16 2 1.80 25 18.72/cJSHC71634 67982 7/16 -14 ¾ 5.03 100 68.06/cJSHC7161 67985 7/16 -14 1 5.83 100 79.69/cJSHC716114 67988 7/16 -14 1¼ 7.01 100 89.06/cJSHC716112 67992 7/16 -14 1½ 8.18 100 99.38/cJSHC716134 67996 7/16 -14 1¾ 6.80 100 119.88/cJSHC7162 67999 7/16 -14 2 9.06 100 125.63/cJSHC71234 68136 ½ -13 ¾ 3.46 100 90.63/cJSHC7121 68139 ½ -13 1 3.95 100 99.56/cJSHC712114 68142 ½ -13 1¼ 4.49 100 106.81/cJSHC712112 68146 ½ -13 1½ 5.20 100 117.94/cJSHC712134 68150 ½ -13 1¾ 6.00 50 65.47/cJSHC7122 68153 ½ -13 2 6.65 50 69.69/cJSHC712212 86160 ½ -13 2½ 7.48 50 84.38/cJSHC7123 68167 ½ -13 3 8.82 50 101.41/cJSHC712312 68174 ½ -13 3½ 9.72 50 121.10/cJSHC7124 68181 ½ -13 4 11.50 50 136.44/cJSHC581 68293 5/8 -11 1 4.25 50 94.53/cJSHC58114 68296 5/8 -11 1¼ 4.50 50 100.63/cJSHC58112 68300 5/8 -11 1½ 4.62 50 110.16/cJSHC58134 68304 5/8 -11 1¾ 4.89 50 116.16/cJSHC582 68307 5/8 -11 2 5.50 50 129.07/cJSHC58214 68310 5/8 -11 2¼ 3.50 25 66.38/cJSHC58212 68314 5/8 -11 2½ 3.75 25 72.38/cJSHC58234 68318 5/8 -11 2¾ 4.00 25 80.39/cJSHC583 68321 5/8 -11 3 4.50 25 87.11/cJSHC58312 68328 5/8 -11 3½ 5.00 25 98.45/cJSHC584 68335 5/8 -11 4 5.75 25 109.89/cJSHC58412 58342 5/8 -11 4½ 6.30 25 121.69/cJSHC585 68349 5/8 -11 5 7.25 25 136.72/cJSHC34114 68444 ¾ -10 1¼ 2.35 25 82.88/cJSHC34112 68447 ¾ -10 1½ 2.48 25 85.35/cJSHC34134 68458 ¾ -10 1¾ 2.75 25 86.60/cJSHC342 68461 ¾ -10 2 3.10 25 95.81/cJSHC34214 68464 ¾ -10 2¼ 3.75 25 101.41/cJSHC34212 68468 ¾ -10 2½ 4.10 25 108.92/cJSHC343 68475 ¾ -10 3 4.89 25 127.69/cJSHC34312 68482 ¾ -10 3½ 5.26 25 150.55/cJSHC344 68489 ¾ -10 4 6.29 25 168.60/cJSHC345 68503 ¾ -10 5 7.78 25 203.13/cother sizes and quantities available by request

COnTInuEd

Slotted

Phillips

SquareDrive

HexSOCKET HEAD CAP SCREWS

ALLOy STEEL BLACk

UPC#

A

SCREWS


SOCKET HEAD CAP SCREWS steel Zinc

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJSHCZ1434 78440 ¼ -20 ¾ 1.40 100 37.25/cJSHCZ141 78442 ¼ -20 1 1.68 100 42.25/cJSHCZ14114 78439 ¼ -20 1¼ 1.92 100 44.75/cJSHCZ14112 78437 ¼ -20 1½ 2.31 100 62.25/cJSHCZ142 78444 ¼ -20 2 2.96 100 67.25/cother sizes and quantities available by request

UPC#


PKG.STD. PKG./


TRADE LIST PRICE PERJSHC614SS 91165 6-32 ¼ .27 100 9.49/cJSHC612SS 91163 6-32 ½ .32 100 11.85/cJSHC634SS 91167 6-32 ¾ .41 100 14.89/cJSHC61SS 91129 6-32 1 .49 100 18.66/cJSHC838SS 91391 8-32 3/8 .42 100 13.69/cJSHC812SS 91932 8-32 ½ .47 100 15.38/cJSHC858SS 91393 8-32 5/8 .52 100 16.59/cJSHC834SS 91394 8-32 ¾ .58 100 18.95/cJSHC81SS 91395 8-32 1 .71 100 23.72/cJSHC1012SS 91455 10-24 ½ .82 100 20.79/cJSHC1034SS 91477 10-24 ¾ .79 100 26.05/cJSHC101SS 91139 10-24 1 .98 100 30.79/cJSHC102SS 91140 10-24 2 1.66 100 33.70/cJSHC3212SS 91271 10-32 ½ .67 100 21.33/cJSHC3234SS 91150 10-32 ¾ .81 100 27.57/cJSHC321SS 91273 10-32 1 .98 100 30.79/cJSHC325SS 91277 10-32 2 1.67 100 87.87/cJSHC1412SS 91145 ¼-20 ½ 1.14 100 39.79/cJSHC1434SS 93663 ¼-20 ¾ 1.41 100 35.02/cJSHC1458SS 93661 ¼-20 5/8 1.25 100 42.12/cJSHC141SS 93667 ¼-20 1 1.66 100 39.79/cJSHC14112SS 93675 ¼-20 1½ 2.31 100 52.79/cJSHC142SS 93683 ¼-20 2 3.02 100 69.89/cJSHC5161SS 91160 5/16 -18 1 2.87 100 93.58/cJSHC516112SS 91161 5/16 -18 1½ 3.73 100 126.21/cJSHC381SS 98106 3/8 -16 1 2.29 100 57.36/cJSHC38114SS 98107 3/8 -16 1¼ 2.60 100 61.53/cJSHC38112SS 98108 3/8 -16 1½ 2.92 100 65.70/cother sizes and quantities available by request

SOCKET HEAD CAP SCREWS 18-8 STAINLESS

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

HexSOCKET HEAD METRIC CAP SCREWS

18-8 STAINLESS • 316 STAINLESS


PKG.STD. PKG./


TRADE LIST PRICE PER18-8 STAINLESSJMSHC36SS 91316 M3 (0.5) 6mm .21 100 14.23/cJMSHC34SS 91314 M3 (0.5) 14mm .29 100 21.33/cJMSHC412SS 91309 M4 (0.7) 12mm .48 100 11.00/cJMSHC420SS 91311 M4 (0.7) 20mm .60 100 12.13/cJMSHC512SS 91310 M5 (0.8) 12mm .78 100 13.50/cJMSHC520SS 91312 M5 (0.8) 20mm .95 100 19.50/cJMSHC1230SS 91307 M12 (0.5) 30mm 9.44 100 130.00/c316 STAINLESSMSHC305316SS 20872 M3 (0.5) 25mm A4-70 2.76 2500 495.00/mother sizes and quantities available by request

39

A

SCREWS



PKG.STD. PKG./



SHTBK1 16461

6-32 1½

1.12

25

72.45/ea kit8-32 1½ 25

10-24 1½ 2510-32 1½ 25

HEX HEAD MACHINE SCREW KIT18-8 STAINLESSSHTBK1:

Contains #6, #8, and #10 Hex Head Stainless Steel Machine Screws 1½ long with full thread.

PART# UPC# DIAMETER

6-32

HSHTBK1:Contains #6, #8, and #10 Hex Head Stainless Steel Machine Screws 1½ long with full thread.

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERSTEEL ZINCJTEL1032 84440 10-32 5/8 .64 100/500 122.33/cJTEL103234 84442 10-32 ¾ .74 100/500 19.54/cJTEL1224 84445 12-24 5/8 .48 50/250 19.54/cJTEL1228 84450 12-28 5/8 .48 50/250 19.54/cBLACK OXIDETEL1024BLK 39250 10-24 5/8 .31 50 59.47/cJTEL1024BLK 84444 10-24 5/8 .62 100/500 59.47/cTEL1032BLK 39260 10-32 5/8 .33 50 59.47/cJTEL1032BLK 84441 10-32 5/8 .64 100/500 59.47/cTEL1032BLKV 39262 10-32 5/8 3.06 500 59.47/cTEL1224BLK 39097 12-24 5/8 .48 50 11.74/cJTEL1224BLK 84446 12-24 5/8 .85 100 23.48/cTEL1224BLKV 39099 12-24 5/8 4.08 500 23.48/cother sizes and quantities available by request

PAN HEAD TRI-DRIVE TELECOM CABINET SCREWS

STEEL zINC • BLACk OxIDEFor use in Telecom Cabinets, relay racks and Patch Panels


★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

HEX KEYS steel

PART# UPC# SIZEWT. PER

PKG.STD. PKG./


TRADE LIST PRICE PERHK116 32728 1/16 .01 1 1.88/eaHK564 32718 5/64 .01 1 1.88/eaHK332 32721 3/32 .01 1 2.13/eaJHK332 13340 3/32 .12 20 42.50/eaHK764 32724 7/64 .01 1 2.13/eaHK18 32727 1/8 .01 1 2.13/eaHK964 32730 9/64 .02 1 2.13/eaHK532 32733 5/32 .02 1 2.13/eaHK316 32736 3/16 .03 1 2.13/eaHK732 32739 7/32 .05 1 2.13/eaHK14 32741 ¼ .07 1 2.25/eaHK516 32744 5/16 .12 1 2.25/eaHK38 32747 3/8 .20 1 2.88/eaHK12 32750 ½ .43 1 10.75/eaHK58 32753 5/8 .81 1 27.50/eaother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

UPC#

A

SCREWS


PAN HEAD SCREW KITS 410 STAINLESS • 18-8 STAINLESS

Two separate kits with the most popular sizes:

kit TEKPK1SS contains #8 and #10 pan head phillips 410 Stainless Steel drill screw with a #2 phillips power bit.

kit TSK10SS contains #10 pan head phillips 18-8 Stainless Steel tapping screw with a #2 phillips power bit.

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./



TEKPK1SS 39611

8 ½

1.89

100

73.60/ea kit

8 ¾ 608 1 50

10 ½ 8010 ¾ 5010 1 402 2 Phillips Power Bit 1

TSK10SS 39510

10 ½

1.97

75

51.33/ea kit

10 ¾ 5010 1 4510 1¼ 3010 1½ 2510 2 202 2 Phillips Power Bit 1

PART# UPC# ITEMWT. PER

PKG.SUGGESTED


SBHK1420 94875

(50) ¼ -20 x ¾ Hex Head Cap Screws - Stainless Steel

5.35 111.72/ea kit

(50) ¼ -20 x 1 Hex Head Cap Screws - Stainless Steel(50) ¼ -20 x 1½ Hex Head Cap Screws - Stainless Steel(200) ¼ Split Lock Washers - Stainless Steel(200) ¼ Flat SAE Washers - Stainless Steel(150) ¼ -20 Hex Nuts - Stainless Steel

SBHK3816 94880

(40) 3/8 -16 x 1 Hex Head Cap Screws - Stainless Steel

7.85 139.72/ea kit

(30) 3/8 -16 x 1¼ Hex Head Cap Screws - Stainless Steel(20) 3/8 -16 x 1½ Hex Head Cap Screws - Stainless Steel(150) 3/8 split lock Washers - stainless steel(150) 3/8 flat sae Washers - stainless steel(90) 3/8 -16 Hex Nuts - Stainless Steel

SBHK1213 94980

(20) ½ -13 x 1 Hex Head Cap Screws - Stainless Steel

8.75 167.72/ea kit

(15) ½ -13 x 1½ Hex Head Cap Screws - Stainless Steel(10) ½ -13 x 2 Hex Head Cap Screws - Stainless Steel(75) ½ Split Lock Washers - Stainless Steel(75) ½ Flat SAE Washers - Stainless Steel(45) ½ -13 Hex Nuts - Stainless Steel

HEX BOLT, NUT AND WASHER KITS

18-8 STAINLESS• Each kit contains Nuts, Flat Washers, Split Lock Washers

and three of the most common lengths of Hex Head Bolts.

• kits are available in ¼ -20, 3/8 -16, and ½ -13.

Slotted

Phillips

SquareDrive

Hex

41

A

SCREWS


TRUSS HEAD RECEPTACLE & WIRING

DEVICE SCREW KIT steel Zinc

Complete kit of 6-32 Truss Head Combo drive (phillips/slotted) Machine screws in the most popular sizes. screws have a lead point and are steel zinc. each kit includes a #1 Phillips x 2" Power Bit.Phillips/Slotted


★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★


PKG.STD. PKG./



TMSK1 39631

6-32 ½

1.67

100

33.81/ea kit

6-32 ¾ 906-32 1 656-32 1¼ 506-32 1½ 406-32 2 35


PKG.STD. PKG./


TRADE LIST PRICE PERSTEEL ZINCJTSF10 81861 4 ½ .15 100/500 5.01/cJTSF101 81995 4 ¾ .20 100/500 6.53/cJTSF11 81862 4 1 .25 100/500 8.56/cJTSF13 83024 4 1½ .34 100/500 11.12/cJTSF7 83021 6 3/8 .18 100/500 8.02/cJTSF12 80225 6 ½ .23 100/500 3.90/cJTSF14 80226 6 ¾ .30 100/500 4.21/cJTSF15 80227 6 1 .35 100/500 4.28/cJTSF9 80228 6 1¼ .40 100/500 4.33/cJTSF38 83036 6 1½ .49 100/500 17.27/cJTSF16 81863 6 2 .63 100/500 39.77/cJTSF44 81592 6 2½ .79 100/500 10.92/cJTSF17 83025 8 3/8 .25 100/500 10.66/cJTSF18 81865 8 ½ .26 100/500 6.32/cJTSF20 80229 8 ¾ .36 100/500 4.71/cJTSF21 80230 8 1 .46 100/500 5.19/cJTSF22 80231 8 1¼ .59 100/500 5.64/cJTSF23 80232 8 1½ .67 100/500 6.14/cJTSF45 81593 8 1¾ .76 100/500 13.87/cJTSF24 83027 8 2 .86 100/500 6.99/cJTSF26 83029 8 2½ 1.05 100/500 27.31/cJTSF19 83026 8 3 1.32 100 17.98/cJTSF25 83028 10 ½ .35 100/500 14.86/cJTSF27 80233 10 ¾ .52 100/500 5.73/cJTSF28 80234 10 1 .61 100/500 6.78/cJTSF29 80235 10 1¼ .75 100/500 7.38/cJTSF30 80236 10 1½ .85 100/500 9.22/cJTSF43 78243 10 1¾ .95 100/500 47.60/cJTSF31 81866 10 2 1.15 100/500 25.97/cJTSF42 78242 10 2½ 1.35 100 14.50/cother sizes and quantities available by request

FLAT HEAD PHILLIPS TAPPING SCREWSSTEEL zINC • 18-8 STAINLESS

Slotted

Phillips

SquareDrive

Hex

FLAT HEAD PHILLIPS Phillips


A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERSTEEL ZINCJTSF32 83030 12 ½ .49 100/500 23.69/cJTSF33 83031 12 ¾ .68 100/500 21.39/cJTSF34 83032 12 1 .85 100/500 18.89/cJTSF35 83033 12 1¼ .95 100/500 26.41/cJTSF36 83034 12 1½ .92 100/500 42.09/cJTSF37 83035 12 2 1.40 100 35.40/cJTSF41 78241 12 2½ 1.86 100 17.14/cJTSF40 83038 12 3 2.06 100 10.53/cJTSF57 78257 14 ¾ .87 100/500 30.20/cJTSF59 78259 14 1 1.01 100/500 32.18/cJTSF60 78260 14 1¼ 1.30 100/500 39.37/cJTSF61 78261 14 1½ 1.46 100/500 42.43/c18-8 STAINLESSJTSF7SS 99707 6 3/8 .12 100/500 16.96/cJTSF18SS 99718 8 ½ .31 100/500 12.02/cJTSF39SS 99729 14 1½ 1.52 100 32.14/cother sizes and quantities available by request

FLAT HEAD PHILLIPS TAPPING SCREWSSTEEL zINC • 18-8 STAINLESS

Slotted

Phillips

SquareDrive

Hex

FLAT HEAD PHILLIPS PhillipsPhillips

PAN HEAD SLOTTED TAPPING SCREWS

18-8 STAINLESS


PKG.STD. PKG./


TRADE LIST PRICE PERJSTS10 80206 6 ½ .25 100/500 10.27/cJSTS11 80207 6 ¾ .32 100/500 12.85/cJSTS12 80208 6 1 .33 100/500 14.49/cJSTS13 80209 8 ½ .34 100/500 13.94/cJSTS14 80210 8 ¾ .47 100/500 22.00/cJSTS15 80211 8 1 .54 100/500 31.17/cJSTS16 80212 8 1¼ .63 100/500 21.19/cJSTS17 80213 8 1½ .74 100/500 23.44/cJSTS18 80214 8 2 .92 100/500 37.93/cJSTS19 80215 10 ½ .48 100/500 20.68/cJSTS20 80216 10 5/8 .52 100/500 23.37/cJSTS21 80217 10 ¾ .60 100/500 26.02/cJSTS22 80218 10 1 .70 100/500 27.12/cJSTS23 80219 10 1¼ .87 100/500 34.59/cJSTS24 80220 10 1½ .98 100/500 34.81/cJSTS25 80221 10 2 1.23 100/500 42.38/cJSTS26 80222 12 ½ .66 100/500 24.32/cJSTS27 80223 12 ¾ .88 100/500 35.39/cJSTS28 80224 12 1 .94 100/500 34.59/cJSTS1412 12243 14 ½ .83 100 39.79/cJSTS60 12244 14 1½ 1.84 100 78.90/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

Slotted

COnTInuEd

FLAT HEAD SQUARE DRIVE TAPPING SCREWS

18-8 STAINLESS

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJTSFS21SS 83039 8 1 .46 100/500 10.21/cother sizes and quantities available by request

FLAT HEAD SQUARE DRIVE

43

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERJSTSP39 84039 6 3/8 .23 100/500 13.94/cJSTSP10 84010 6 ½ .27 100/500 13.50/cJSTSP11 84011 6 ¾ .29 100/500 12.86/cJSTSP12 84012 6 1 .42 100/500 18.19/cJSTSP125 84427 6 1½ .54 100/500 18.36/cJSTSP37 84037 8 3/8 .19 100/500 15.10/cJSTSP13 84013 8 ½ .39 100/500 13.94/cJSTSP14 84014 8 ¾ .47 100/500 19.71/cJSTSP15 84015 8 1 .58 100/500 23.83/cJSTSP16 84016 8 1¼ .67 100/500 34.40/cJSTSP17 84017 8 1½ .76 100/500 29.95/cJSTSP18 84018 8 2 .98 100/500 41.41/cJSTSP19 84019 10 ½ .52 100/500 20.97/cJSTSP20 84020 10 5/8 .61 100/500 23.37/cJSTSP21 84021 10 ¾ .64 100/500 27.41/cJSTSP22 84022 10 1 .77 100/500 34.26/cJSTSP23 84023 10 1¼ 1.22 100/500 36.06/cJSTSP24 84024 10 1½ .98 100/500 41.92/cJSTSP25 84025 10 2 1.46 100/500 56.22/cJSTSP29 84029 10 3 1.81 100 57.96/cJSTSP26 84026 12 ½ .49 100/500 35.81/cJSTSP27 84027 12 ¾ .88 100/500 38.16/cJSTSP28 84028 12 1 1.05 100/500 42.40/cJSTSP33 84033 12 1¼ 1.22 100/500 40.22/cJSTSP32 84032 12 1½ 1.37 100/500 45.56/cJSTSP34 84034 12 2 1.68 100 48.33/cJSTSP35 84035 12 3 2.51 100 68.43/cJSTSP30 84030 14 ¾ 1.15 100/500 90.74/cother sizes and quantities available by request

PAN HEAD PHILLIPS TAPPING SCREWS18-8 STAINLESS

PAN HEAD PHILLIPS TAPPING SCREWS

PAN HEAD TRI-DRIVE TAPPING SCREWSsteel Zinc

Introduced nationally in 1994 by Metallics

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJTTS12 80138 6 ½ .29 100/500 6.86/cJTTS14 80139 6 ¾ .36 100/500 7.05/cJTTS14M 75500 6 ¾ 3.60 1000 68.14/mJTTS15 80140 6 1 .42 100/500 7.05/cJTTS38 80141 6 1½ .56 100/500 9.24/cJTTS18 80142 8 ½ .37 100/500 7.19/cJTTS20 80143 8 ¾ .48 100/500 7.94/cJTTS21 80144 8 1 .58 100/500 8.59/cJTTS22 80145 8 1¼ .64 100/500 9.60/cJTTS23 80146 8 1½ .75 100/500 10.06/cJTTS24 80147 8 2 .97 100/500 17.21/cJTTS25 80148 10 ½ .50 100/500 7.76/cJTTS27 80149 10 ¾ .64 100/500 8.20/cJTTS28 80150 10 1 .75 100/500 8.59/cJTTS29 80151 10 1¼ .88 100/500 8.95/cJTTS30 80152 10 1½ 1.01 100/500 10.06/cJTTS31 80153 10 2 1.26 100/500 16.14/cJTTS33 80154 12 ¾ .82 100/500 10.35/cJTTS34 80155 12 1 .98 100/500 12.19/cJTTS35 80156 12 1¼ 1.23 100/500 14.24/cJTTS36 80157 12 1½ 1.32 100/500 15.93/cJTTS37 80158 12 2 1.68 100 21.53/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

UPC#

PAN HEAD TRI-DRIVE

UPC#UPC#

Manufactured byavanti screw, inc.,

A Metallics Affiliate

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

A

SCREWS


PAN HEAD SQUARE DRIVETAPPING SCREWS

steel Zinc

Slotted

Phillips

SquareDrive

Hex

SquareDriveSquareDriveSquare


PKG.STD. PKG./


TRADE LIST PRICE PERJTSS1 80237 6 ½ .26 100/500 4.97/cJTSS2 80238 6 ¾ .35 100/500 5.13/cJTSS3 80239 6 1 .40 100/500 6.56/cJTSS4 80240 6 1¼ .43 100500 7.84/cJTSS5 80241 6 1½ .54 100/500 9.04/cJTSS6 80242 6 2 .66 100/500 16.30/cJTSS7 80243 8 ½ .38 100/500 5.31/cJTSS8 80244 8 ¾ .49 100/500 5.56/cJTSS9 80245 8 1 .59 100/500 6.81/cJTSS10 80246 8 1¼ .66 100/500 9.25/cJTSS11 80247 8 1½ .77 100/500 10.47/cJTSS12 80248 8 2 .92 100/500 12.21/cJTSS25 80249 10 ½ .49 100/500 6.78/cJTSS27 80250 10 ¾ .62 100/500 7.50/cJTSS28 80251 10 1 .76 100/500 8.42/cJTSS29 80252 10 1¼ .90 100/500 10.44/cJTSS30 80253 10 1½ 1.02 100/500 11.87/cJTSS31 80254 10 2 1.29 100/500 14.04/cJTSS32 80255 10 2½ 1.58 100 19.69/cJTSS81 80256 10 3 1.73 100 26.28/cJTSS33 80257 12 ¾ .88 100/500 11.82/cJTSS34 80258 12 1 1.04 100/500 13.00/cJTSS35 80259 12 1¼ 1.28 100/500 14.07/cJTSS36 80260 12 1½ 1.38 100/500 16.33/cJTSS37 80261 12 2 1.75 100 20.08/cJTSS83 80262 12 3 2.44 100 26.28/cother sizes and quantities available by request


PKG.STD. PKG./


TRADE LIST PRICE PERJTSS7SS 96407 8 ½ .39 100/500 14.92/cJTSS8SS 96408 8 ¾ .51 100/500 20.33/cJTSS9SS 96409 8 1 .60 100/500 11.50/cJTSS10SS 96410 8 1¼ .68 100/500 13.51/cJTSS11SS 96411 8 1½ .79 100/500 15.81/cJTSS25SS 96425 10 ½ .52 100/500 15.81/cJTSS27SS 96427 10 ¾ .60 100/500 17.68/cJTSS28SS 96428 10 1 .99 100/500 25.30/cJTSS29SS 96429 10 1¼ .87 100/500 33.21/cJTSS30SS 96430 10 1½ .94 100/500 34.07/cJTSS31SS 96431 10 2 1.25 100/500 41.49/cJTSS81SS 96841 10 3 1.82 100/500 39.18/cother sizes and quantities available by request

PAN HEAD SQUARE DRIVE TAPPING SCREWS

18-8 STAINLESS

Slotted

Phillips

SquareDrive

Hex


45

A

SCREWS


OVAL HEAD PHILLIPS TAPPING SCREWS

18-8 STAINLESS

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJSTPO1 22356 6 2 .67 100/500 18.03/cJSTPO2 22357 8 ¾ .51 100/500 8.51/cJSTPO3 22358 8 1 .59 100/500 18.03/cJSTPO4 22359 8 1½ .77 100/500 14.42/cJSTPO5 22360 10 ¾ .64 100/500 11.54/cJSTPO6 22361 10 1 .76 100/500 14.42/cJSTPO7 22362 10 1¼ .88 100/500 16.72/cJSTPO8 22363 10 1½ 1.01 100/500 19.15/cJSTPO9 22364 10 2 1.26 100/500 23.83/cJSTPO10 22365 12 1 .98 100/500 19.91/cJSTPO11 22366 12 1¼ 1.23 100/500 26.60/cother sizes and quantities available by request

ROUND WASHER HEAD SQUARE/PHILLIPSTAPPING SCREWS

steel ZincManufactured by

avanti screw, inc., A Metallics Affiliate

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PER100 PACKJRWS7 80263 8 ½ .41 100/500 7.94/cJRWS8 80264 8 ¾ .52 100/500 7.94/cJRWS9 80265 8 1 .59 100/500 8.59/cJRWS10 80266 8 1¼ .69 100/500 9.60/cJRWS11 80267 8 1½ .83 100/500 10.06/cJRWS12 80268 8 2 1.00 100/500 17.21/cJRWS26 80269 10 ½ .55 100/500 8.55/cJRWS27 80270 10 ¾ .68 100/500 8.78/cJRWS28 80271 10 1 .81 100/500 9.95/cJRWS29 80272 10 1¼ .89 100/500 18.26/cJRWS30 80273 10 1½ 1.10 100/500 18.86/cJRWS31 80274 10 2 1.30 100/500 25.16/c500 PACKJRWS7V 97607 8 ½ 2.05 500 7.70/cJRWS8V 97608 8 ¾ 2.60 500 7.78/cJRWS9V 97609 8 1 2.95 500 7.80/cJRWS10V 97610 8 1¼ 3.45 500 8.35/cJRWS11V 97611 8 1½ 4.15 500 9.76/cJRWS12V 97612 8 2 5.00 500 16.69/cJRWS26V 97626 10 ½ 2.75 500 8.29/cJRWS27V 97627 10 ¾ 3.16 500 8.52/cJRWS28V 97628 10 1 4.05 500 9.65/cJRWS29V 97629 10 1¼ 4.45 500 17.71/cJRWS30V 97630 10 1½ 5.50 500 18.29/cJRWS31V 97631 10 2 6.38 500 24.40/cBULKRWS75B 54030 8 ½ 17.90 5000 74.69/mRWS710B 54031 8 ½ 35.82 10000 72.45/mJRWS10M 88910 8 1¼ 6.90 1000 80.99/mRWS105B 54052 8 1¼ 34.50 5000 78.56/mJRWS29M 88929 10 1¼ 8.94 1000 171.79/mother sizes and quantities available by request

UPC#UPC#

Phillips

A

SCREWS


PART# UPC# DIAMETER LENGTH COATINGWASHER

SIZEWT. PER

PKG.STD. PKG/

MSTR SLEEVESUGGESTED TRADE

LIST PRICE PERLTCC2859C 22747 12 1¼ Mechanical Zinc 5/8 1.38 100 43.15/cLTCC2859M 22746 12 1¼ Mechanical Zinc 5/8 13.80 1000 420.73/mLTCC2859B 22739 12 1¼ Mechanical Zinc 5/8 69.00 5000 410.00/mLTZP2859C 22744 12 1¼ Zinc 5/8 1.38 100 35.85/cLTZP2859M 22745 12 1¼ Zinc 5/8 13.80 1000 340.58/mLTZP2859B 22738 12 1¼ Zinc 5/8 69.00 5000 323.55/m

The Game ChangerMECHANICAL zINC COATING • zINC PLATE

A screw and 5/8 washer in one!Manufactured by

avanti screw, inc., A Metallics Affiliate

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

STD. PKG/ SUGGESTED T

LATE

Mechanical Zinc Coating Corrosion resistant

Zinc Plate

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERSLOTTEDJTS85 86204 6 1¾ .60 100/500 11.00/cJTS65 82584 14 2½ 2.69 100 23.77/cTS65B 98365 14 2½ 48.42 1800 230.62/mTS66 10585 14 3 3.08 100 29.96/cTS66M 73466 14 3 31.73 1000 261.66/mPHILLIPSJTSP39 98183 6 2 .66 100/500 11.20/cJTSP16 95247 8 ¼ .29 100/500 4.90/cJTSP20 98178 8 ¾ .42 100/500 4.80/cTSP85B 12861 8 2½ 32.50 3000 28.63/mJTSP43 98185 8 3 1.41 100 6.70/cJTSP29 98180 10 1¼ .93 100/500 6.92/cJTSP30 98181 10 1½ .99 100/500 8.40/cJTSP86 98186 12 4 3.01 100 22.43/cTSP67B 12859 14 2¼ 19.90 800 22.61/cTSP68V 98184 14 3½ 19.16 500 71.13/cTSP70B 12862 14 4 12.68 300 78.16/cCOMBOJTS1 82553 4 ¼ .14 100/500 3.24/cJTS2 82554 4 3/8 .17 100/500 3.48/cJTS10 80159 4 ½ .20 100/500 3.94/cJTS3 82555 4 5/8 .22 100/500JTS4 80160 4 ¾ .23 100/500 4.58/cJTS11 80161 4 1 .28 100/500 4.85/cJTS6 80162 6 ¼ .19 100/500 3.36/cJTS7 80163 6 3/8 .23 100/500 3.38/cJTS12 80164 6 ½ .26 100/500 3.91/cJTS12M 73412 6 ½ 2.60 1000 37.52/mJTS13 80165 6 5/8 .28 100/500 4.00/cJTS14 80166 6 ¾ .33 100/500 4.21/cJTS14M 81171 6 ¾ 3.30 1000 37.52/mJTS15 80167 6 1 .39 100/500 3.91/cJTS15M 73415 6 1 3.53 1000 37.52/mJTS9 80168 6 1¼ .47 100/500 4.33/cJTS38 80169 6 1½ .53 100/500 5.50/cJTS17 80171 8 3/8 .32 100/500 3.54/cJTS18 80172 8 ½ .37 100/500 4.05/cJTS18M 81172 8 ½ 3.20 1000 33.10/mother sizes and quantities available by request

PAN HEAD SLOTTED/PHILLIPS/COMBO TAPPING SCREWS

steel Zinc

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

PAN HEAD SLOTTED/PHILLIPS/COMBO PAN HEAD SLOTTED/PHILLIPS/COMBO Slotted

Phillips

CONTINUED ON NEXT PAGE

47

A

SCREWS

www.metal l i cs .usCONTINUED ON NEXT PAGE


PKG.STD. PKG./


TRADE LIST PRICE PERCOMBOJTS19 80173 8 5/8 .41 100/500 4.30/cJTS20 80174 8 ¾ .47 100/500 4.70/cJTS21 80175 8 1 .57 100/500 5.22/cJTS21M 81173 8 1 5.09 1000 44.52/mTS215M 17323 8 1 25.47 5000 41.65/mTS2110M 17324 8 1 51.11 10000 39.93/mJTS22 80176 8 1¼ .66 100/500 5.64/cTS225M 17325 8 1¼ 29.89 5000 41.65/mJTS23 80177 8 1½ .73 100/500 6.14/cJTS48 80178 8 1¾ .86 100/500 9.40/cJTS24 80179 8 2 1.00 100/500 9.46/cJTS84 82603 8 2½ 1.14 100 10.95/cJTS49 80180 10 3/8 .44 100/500 4.00/cJTS25 80181 10 ½ .50 100/500 4.33/cJTS25M 73425 10 ½ 4.57 1000 35.00/mTS25B 90725 10 ½ 47.82 10000 33.90/mJTS26 80182 10 5/8 .57 100/500 4.85/cJTS27 80183 10 ¾ .63 100/500 5.73/cJTS27V 95248 10 ¾ 2.95 500 56.25/mJTS27M 73427 10 ¾ 5.90 1000 55.09/mTS27B 20336 10 ¾ 22.84 4000 53.43/mJTS28 80184 10 1 .74 100/500 6.78/cTS28B 90728 10 1 68.55 10000 43.40/mJTS28V 95249 10 1 3.75 500 57.12/mTS285M 17326 10 1 34.14 5000 50.06/mJTS29 80185 10 1¼ .86 100/500 6.96/cJTS29M 73429 10 1¼ 8.07 1000 56.00/mTS29B 90729 10 1¼ 80.25 10000 53.74/mJTS30 80186 10 1½ .95 100/500 9.22/cTS30B 90730 10 1½ 47.00 5000 67.45/mJTS30M 73430 10 1½ 9.40 1000 88.48/mJTS51 80187 10 1¾ 1.14 100/500 9.37/cJTS51M 73451 10 1¾ 11.12 1000 89.37/mJTS31 80188 10 2 1.29 100/500 13.34/cJTS80 80189 10 2½ 1.54 100 16.08/cJTS81 80190 10 3 1.82 100 17.43/cTS81M 72981 10 3 17.65 1000 140.56/mJTS32 80191 12 ½ .65 100/500 6.60/cJTS52 82577 12 5/8 .74 100/500 13.13/cJTS33 80192 12 ¾ .79 100/500 6.96/cJTS33M 73433 12 ¾ 7.90 1000 66.82/mJTS34 80193 12 1 1.00 100/500 7.84/cTS34B 90734 12 1 50.00 5000 60.74/mJTS35 80194 12 1¼ 1.15 100/500 9.13/cJTS36 80195 12 1½ 1.33 100/500 10.60/cJTS54 80196 12 1¾ 1.53 100/500 13.48/cJTS37 80197 12 2 1.60 100 15.11/cJTS82 80198 12 2½ 2.06 100 22.70/cJTS83 80199 12 3 2.37 100 28.47/cother sizes and quantities available by request

COnTInuEd

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

Slotted

Phillips


steel Zinc

A

SCREWS


INDENTED HEX HEAD SLOTTED TAPPING SCREWS

STEEL zINC • 18-8 STAINLESSSlotted

Phillips

SquareDrive

Hex

SlottedSlotted



PKG.STD. PKG./


TRADE LIST PRICE PERSTEEL ZINC1/4 HEADJDS150 80275 6 3/8 .27 100/500 4.70/cJDS150V 97450 6 3/8 1.35 500 4.08/cJDS150M 53089 6 3/8 2.70 1000 36.78/mJDS161 80276 6 ½ .30 100/500 4.77/cJDS161V 97461 6 ½ 1.50 500 4.14/cJDS161M 88062 6 ½ 2.43 1000 28.64/mJDS160 80277 6 ¾ .37 100/500 4.96/cJDS160V 97460 6 ¾ 1.85 500 4.36/cJDS163 80278 6 1 .43 100/500 5.92/cJDS163V 97463 6 1 2.15 500 5.15/cJDS164 80279 6 1¼ .51 100/500 7.11/cJDS164V 97464 6 1¼ 2.55 500 6.19/cJDS165 80280 6 1½ .62 100/500 8.18/cJDS165V 97465 6 1½ 3.10 500 7.11/cJDS151 80281 7 ½ .33 100/500 5.25/cJDS151V 97451 7 ½ 1.65 500 4.21/cJDS166 80282 7 ¾ .43 100/500 5.51/cJDS166V 97466 7 ¾ 1.80 500 4.31/cJDS152 80283 8 ½ .37 100/500 5.51/cJDS152V 97452 8 ½ 1.85 500 4.79/cJDS152M 88052 8 ½ 3.11 1000 46.77/mDS1525M 13977 8 ½ 15.94 5000 34.87/mDS152B 14552 8 ½ 37.00 10000 27.22/mother sizes and quantities available by request


PKG.STD. PKG./


TRADE LIST PRICE PERCOMBOJTS55 80200 14 ½ .93 100/500 10.26/cTS55B 98355 14 ½ 45.15 5000 99.52/mJTS56 81174 14 5/8 1.03 100/500 14.70/cJTS57 80201 14 ¾ 1.13 100/500 11.36/cTS57B 98357 14 ¾ 32.53 3000 104.72/mJTS59 80202 14 1 1.44 100/500 12.30/cTS59B 98359 14 1 38.80 3000 106.64/mJTS60 80203 14 1¼ 1.55 100/500 16.03/cTS60B 98360 14 1¼ 34.03 2000 125.56/mJTS61 80204 14 1½ 1.84 100/500 18.22/cTS61B 98361 14 1½ 52.90 3000 157.54/mJTS62 82582 14 1¾ 2.04 100 17.02/cTS62B 98362 14 1¾ 36.13 1800 16.03/cJTS63 80205 14 2 2.34 100 18.93/cTS63B 98363 14 2 34.78 1500 18.54/cJTS47 81999 14 3 3.19 100 21.08/cother sizes and quantities available by request

COnTInuEd

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

Slotted

Phillips


steel Zinc

49

A

SCREWS




Phillips

SquareDrive

Hex

SlottedSlotted


PKG.STD. PKG./


TRADE LIST PRICE PERSTEEL ZINC1/4 HEADJDS153 80284 8 ¾ .45 100/500 6.15/cJDS153V 97453 8 ¾ 2.25 500 5.35/cJDS153M 88053 8 ¾ 4.50 1000 52.25/mJDS82 81706 8 5/8 .43 100/500 5.75/cJDS154 80285 8 1 .56 100/500 6.60/cJDS154V 97454 8 1 2.65 500 6.01/cJDS154M 92155 8 1 5.23 1000 60.30/mDS1545M 26545 8 1 26.35 5000 38.57/mJDS162 80286 8 1¼ .68 100/500 8.40/cJDS162V 97462 8 1¼ 3.40 500 7.31/cJDS157 80287 8 1½ .75 100/500 9.37/cJDS157V 97457 8 1½ 3.75 500 8.15/cJDS159 80288 8 2 1.00 100/500 12.01/cJDS159V 97459 8 2 4.67 500 10.44/cJDS84 81708 8 2½ 1.16 100/500 19.03/cJDS155 80289 10 ½ .37 100/500 5.99/cJDS155V 97455 10 ½ 1.85 500 5.21/cJDS156 80290 10 ¾ .51 100/500 7.02/cJDS156V 97456 10 ¾ 2.55 500 6.10/cJDS158 80291 10 1 .61 100/500 8.09/cJDS158V 97458 10 1 3.05 500 7.03/cJDS168 80293 10 1½ .88 100/500 12.01/cJDS168V 97468 10 1½ 4.23 500 10.45/cJDS169 80294 10 2 1.12 100/500 15.97/cJDS169V 97469 10 2 5.60 500 13.98/c5/16 HEADJDS180 80295 10 ½ .55 100/500 6.41/cJDS180V 97480 10 ½ 2.75 500 5.57/cJDS181 80296 10 ¾ .63 100/500 7.02/cJDS181V 97481 10 ¾ 3.15 500 6.25/cDS181B 92181 10 ¾ 17.87 3000 54.87/mJDS182 80297 10 1 .75 100/500 8.09/cJDS182V 92782 10 1 1.15 500 7.28/cDS182M 10783 10 1 7.27 1000 70.00/mJDS182M 97500 10 1 6.10 1000 62.50/mDS182B 92182 10 1 29.25 4000 55.27/mJDS183 80298 10 1¼ .89 100/500 9.72/cJDS183V 97483 10 1¼ 4.30 500 8.46/cDS183M 10784 10 1¼ 2.47 1000 84.00/mJDS184 80299 10 1½ 1.03 100/500 11.27/cJDS184V 97484 10 1½ 5.00 500 10.61/cDS184M 10785 10 1½ 9.68 1000 98.00/mDS184B 10754 10 1½ 29.04 3000 93.10/mJDS185 80300 10 2 1.30 100 16.23/cJDS185V 97485 10 2 6.25 500 14.11/cDS185M 10786 10 2 12.00 1000 134.00/mDS185B 92185 10 2 39.11 3125 105.85/mJDS80 80301 10 2½ 1.53 100 18.94/cJDS80V 97380 10 2½ 7.75 500 16.46/cDS80M 10781 10 2½ 14.74 1000 150.00/mother sizes and quantities available by request


A

SCREWS




Phillips

SquareDrive

Hex

Slotted

INDENTED HEX HEAD SLOTTED INDENTED HEX HEAD SLOTTED Slotted


PKG.STD. PKG./


TRADE LIST PRICE PERSTEEL ZINC5/16 HEADJDS81 80302 10 3 1.81 100 21.77/cJDS81V 97381 10 3 9.05 500 18.93/cJDS186 81767 12 ½ .67 100/500 9.78/cJDS170 80303 12 ¾ .79 100/500 10.92/cJDS170V 97470 12 ¾ 3.95 500 9.49/cJDS171 80304 12 1 1.00 100/500 11.27/cJDS171V 97471 12 1 5.00 500 9.80/cDS1715M 13979 12 1 48.17 5000 83.38/mJDS172 80305 12 1¼ 1.17 100/500 12.66/cJDS172V 97472 12 1¼ 5.85 500 11.01/cDS172M 69798 12 1¼ 11.70 1000 102.00/mJDS173 80306 12 1½ 1.32 100/500 14.58/cJDS173V 97473 12 1½ 6.60 500 12.67/cJDS174 80307 12 2 1.66 100 16.78/cJDS174V 97474 12 2 8.15 500 14.59/cDS174M 69799 12 2 16.35 1000 102.11/mJDS86 81710 12 2½ 2.05 100 18.58/cJDS83 81707 12 3 2.47 100 20.93/c3/8 HEADJDS85 81709 14 ½ .94 100/500 9.83/cJDS191 81772 14 5/8 1.17 100/500 10.83/cJDS175 80308 14 ¾ .97 100/500 16.68/cJDS175V 97475 14 ¾ 4.85 500 14.51/cJDS176 80309 14 1 1.53 100/500 17.58/cJDS176V 97476 14 1 7.65 500 15.29/cJDS177 80310 14 1¼ 1.70 100 19.99/cJDS177V 97477 14 1¼ 8.50 500 17.39/cJDS178 80311 14 1½ 1.96 100 20.38/cDS178M 10749 14 1½ 19.60 1000 162.34/mJDS178V 97478 14 1½ 10.05 500 17.73/cJDS179 80312 14 2 2.45 100 29.04/cJDS179V 97479 14 2 12.25 500 25.25/cDS179M 10753 14 2 24.50 1000 213.78/mJDS187 81768 14 2½ 2.91 100 85.37/cJDS143 80313 14 3 3.38 100 33.33/cJDS143V 97443 14 3 16.90 500 28.98/c1/2 HEADJDS5161 90401 5/16 1 2.77 100/500 22.75/c18-8 STAINLESS1/4 HEADJDS152SS 92752 8 ½ .38 100/500 14.29/cJDS154SS 92754 8 1 .54 100/500 19.81/cJDS162SS 92762 8 1¼ .69 100/500 19.73/cJDS157SS 92757 8 1½ .77 100/500 22.71/cJDS159SS 92759 8 2 .98 100/500 28.88/cJDS192SS 92792 8 3 1.40 100 78.68/cJDS158SS 92758 10 1 .81 100/500 25.90/cother sizes and quantities available by request

COnTInuEd


51

A

SCREWS


Four drives in one head

Introduced in 1999


PKG.STD. PKG./


TRADE LIST PRICE PER1/4 HEADQDS152 39100 8 ½ .39 100/500 10.81/cQDS152V 39116 8 ½ 1.95 500 10.60/cQDS153 39101 8 ¾ .48 100/500 11.58/cQDS153V 39117 8 ¾ 2.40 500 11.36/cQDS154 39102 8 1 .59 100/500 12.40/cQDS156 39103 10 ¾ .55 100/500 12.00/cQDS158 39104 10 1 .66 100/500 13.15/c5/16 HEADQDS181 39106 10 ¾ .68 100/500 12.40/cQDS181V 39119 10 ¾ 3.36 500 12.15/cQDS182 39107 10 1 .82 100/500 13.66/cQDS183 39108 10 1¼ .95 100/500 14.13/cQDS184 39109 10 1½ 1.09 100/500 15.06/cQDS185 39110 10 2 1.36 100 17.43/cQDS185V 39118 10 2 6.80 500 17.10/cQDS80 39111 10 2½ 1.62 100 21.31/cQDS171 39112 12 1 .97 100/500 16.68/cQDS172 39113 12 1¼ 1.12 100/500 17.65/cQDS174 39114 12 2 1.71 100 22.00/cother sizes and quantities available by request

HEX HEAD QuaDrive TAPPING SCREWSIndented Hex Washer, slotted, Phillips, square recess Head

steel ZincFIRST IN THE WORLD

The ideal fastener for light gauge sheet metal


a MetallicsAffiliate

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★Slotted

Phillips

SquareDrive

Hex

Introduced in 1999

Indented Hex Washer,

Introduced in 1999



Phillips

SquareDrive

Hex

COnTInuEd


PKG.STD. PKG./


TRADE LIST PRICE PER18-8 STAINLESS5/16 HEADJDS180SS 92780 10 ½ .52 100/500 19.07/cJDS181SS 92781 10 ¾ .67 100/500 19.84/cJDS182SS 92782 10 1 .80 100/500 23.15/cJDS183SS 92783 10 1¼ .87 100/500 25.29/cJDS184SS 81764 10 1½ 1.02 100/500 29.59/cJDS185SS 81765 10 2 1.33 100 30.75/cJDS80SS 92680 10 2½ 1.53 100 45.25/cJDS81SS 92681 10 3 1.83 100 69.50/cJDS186SS 92786 12 ½ .75 100/500 42.03/cJDS170SS 92770 12 ¾ .89 100/500 42.39/cJDS171SS 92771 12 1 1.04 100/500 33.33/cJDS173SS 92773 12 1½ 1.35 100/500 39.55/cJDS174SS 92774 12 2 1.70 100/500 34.31/c3/8 HEADJDS187SS 92787 14 1 1.63 100/500 46.66/cJDS177SS 92777 14 1¼ 1.81 100 62.49/cJDS178SS 92778 14 1½ 2.22 100 60.48/cJDS179SS 92779 14 2 2.69 100 69.93/cother sizes and quantities available by request

A

SCREWS


HEX HEAD SLOTTED SHARP POINT SELF-PIERCING/TAPPING SCREWS

steel ZincSlotted

Phillips

SquareDrive

Hex

Slotted

Hex

Slotted

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERDOMESTIC 1/4 HEADJQK10D 50077 8 ¾ .43 100/500 11.50/cJQK10DV 50078 8 ¾ 2.15 500 11.50/cDOMESTIC BULK PACKS — 1/4 HEADQK10DM 50079 8 ¾ 4.30 1000 115.00/mQK10DB 50080 8 ¾ 38.80 10000 115.00/m1/4 HEADJQK1 80314 7 ½ .32 100/500 4.92/cJQK1V 97501 7 ½ 1.60 500 4.77/cQK1M 10660 7 ½ 2.76 1000 45.63/m QK18M 78308 7 ½ 25.60 8000 44.26/mJQK5 80315 8 ½ .35 100/500 3.68/cJQK5V 97505 8 ½ 1.75 500 3.57/cQK5M 10661 8 ½ 3.02 1000 34.16/mQK55M 78315 8 ½ 15.14 5000 33.14/mQK510M 90221 8 ½ 29.52 10000 32.15/mQK512M 78314 8 ½ 36.24 12000 31.19/mJQK10 80316 8 ¾ .43 100/500 4.05/cJQK10V 97510 8 ¾ 2.15 500 3.93/cQK10M 10662 8 ¾ 3.86 1000 37.69/mQK10B 77359 8 ¾ 38.80 10000 36.56/mJQK15V 97515 8 1 2.70 500 4.21/cQK15M 10663 8 1 4.95 1000 40.54/mQK155M 78310 8 1 24.75 5000 39.32/mQK158M 78311 8 1 43.20 8000 38.14/mQK1510M 78312 8 1 54.00 10000 36.99/mJQK15 80317 8 1 .54 100/500 4.34/cJQK16 75816 8 1¼ .63 100/500 6.20/cJQK16V 97516 8 1¼ 3.10 500 6.10/cQK16M 27890 8 1¼ 6.03 1000 60.14/mQK168M 27886 8 1¼ 47.06 8000 58.34/mQK1610M 27877 8 1¼ 60.30 10000 56.59/mJQK17 80318 8 1½ .71 100/500 6.24/cQK17CCL 78317 8 1½ 1.78 250 6.05/cJQK17V 97517 8 1½ 3.55 500 6.05/cQK17M 10664 8 1½ 6.59 1000 58.10/mQK175M 27617 8 1½ 32.95 5000 56.38/mQK178M 27905 8 1½ 52.72 8000 54.67/mQK1710M 27904 8 1½ 65.90 10000 53.03/mJQK19 80319 8 2 .88 100/500 9.60/cQK19CCL 73819 8 2 2.20 250 9.31/cJQK19V 97519 8 2 4.40 500 9.31/cQK19M 10665 8 2 8.45 1000 89.44/mJQK20 80320 10 ½ .53 100/500 4.40/cJQK20V 97520 10 ½ 2.65 500 4.40/cQK20M 10666 10 ½ 3.53 1000 40.94/mJQK25 80321 10 ¾ .51 100/500 5.00/cJQK25V 97525 10 ¾ 2.55 500 5.00/cQK25M 10667 10 ¾ 4.85 1000 46.66/mQK254M5V 10773 10 ¾ 22.95 4500 45.26/mJQK30 80322 10 1 .61 100/500 5.43/cJQK30V 97525 10 1 2.99 500 5.43/cQK30M 10668 10 1 7.10 1000 50.63/mJQK21 75821 10 1¼ .82 100/500 10.25/cJQK21CCL 69421 10 1¼ 2.05 250 10.25/cJQK21V 97521 10 1¼ 4.10 500 10.25/cJQK22 75822 10 1½ .87 100/500 13.15/cJQK22V 80865 10 1½ 4.22 500 13.15/cJQK23 75823 10 2 1.25 100/500 17.35/cJQK23V 80866 10 2 6.25 500 17.35/cother sizes and quantities available by request COnTInuEd On nEXT PAGE

53

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PER5/16 HEADJQK59 75859 10 1 .71 100/500 8.91/cJQK60ª 75860 10 2 1.25 100/500 7.69/cQK60M 51387 10 2 2.50 1000 97.50/mJQK12114 85983 12 1¼ 1.11 100/500 16.13/cother sizes and quantities available by request

COnTInuEd

HEX HEAD SLOTTED SHARP POINT SELF-PIERCING/TAPPING SCREWS

steel ZincSlotted

Phillips

SquareDrive

Hex

Slotted

Hex

Slotted

Hex

GRAY HEX HEAD SLOTTED SHARP POINT SELF-PIERCING/TAPPING SCREWS

steel ZincSlotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERGRAY 1/4 HEADJQK15GR 50072 8 1 .54 100/500 5.55/cJQK15GRV 50073 8 1 2.70 500 5.28/cQK15GRM 27871 8 1 5.40 1000 51.75/mQK15GR8M 27872 8 1 43.20 8000 51.75/mQK15GR10M 27870 8 1 54.00 10000 51.75/mJQK16GR 27880 8 1¼ .63 100/500 7.40/cJQK16GRV 27881 8 1¼ 3.10 500 7.40/cQK16GRM 27888 8 1¼ 6.08 1000 72.52/mQK16GR8M 27889 8 1¼ 45.57 8000 72.52/mQK16GR10M 27887 8 1¼ 60.80 10000 72.52/mJQK17GR 27897 8 1½ .71 100/500 7.48/cJQK17GRV 27898 8 1½ 3.55 500 7.48/cQK17GRM 27908 8 1½ 7.10 1000 73.31/mQK17GR8M 27907 8 1½ 56.80 8000 73.31/mQK17GR10M 27906 8 1½ 71.00 10000 73.31/mother sizes and quantities available by request

WHITE HEX HEAD SLOTTED SHARP POINT SELF-PIERCING/TAPPING SCREWS

steel ZincSlotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERWHITE 1/4 HEADJQK15W 50074 8 1 .54 100/500 13.13/cJQK15WV 50075 8 1 2.70 500 12.74/cQK15WM 27875 8 1 5.40 1000 127.40/mQK15W8M 27874 8 1 43.20 8000 127.40/mQK15W10M 27873 8 1 54.00 10000 127.40/mJQK16W 27884 8 1¼ .63 100/500 17.38/cJQK16WV 27883 8 1¼ 3.10 500 17.38/cQK16WM 27894 8 1¼ 6.08 1000 170.32/mQK16W8M 27892 8 1¼ 45.57 8000 16.86/mQK16W10M 27891 8 1¼ 60.80 10000 170.32/mJQK17W 27899 8 1½ .71 100/500 18.13/cJQK17WV 27900 8 1½ 3.55 500 18.13/cQK17WM 27911 8 1½ 7.10 1000 177.67/mQK17W8M 27910 8 1½ 56.80 8000 177.67/mQK17W10M 27909 8 1½ 71.00 10000 177.67/mJQK19W 97522 8 2 .88 100/500 9.75/cJQK19WCCL 97600 8 2 2.50 250 9.75/cQK19WM 10686 8 2 8.90 1000 95.55/mother sizes and quantities available by request

GRAY HEX HEAD SLOTTED SHARP POINT Slotted

Hex

PART# UPC#

WHITE HEX HEAD SLOTTED SHARP POINT Slotted

Hex

A

SCREWS


HEX HEAD SLOTTED SHARP POINT SELF-PIERCING/TAPPING SCREW KIT

steel Zinc• 4 Popular Sheet Metal Screw Sizes – 500 pieces total• High Performance - Hex Slotted Sharp Point• Double lead thread means twice the driving speed!• Convenient, Reusable Container• Plumbing, HVAC & Electrical Contractor

Hex Slotted

SELF-PIERCING/TAPPING SCREW KITSELF-PIERCING/TAPPING SCREW KIT


PKG.STD. PKG./



QKK1 39291

8 ½

2.23

200

26.98/ea kit8 ¾ 1508 1 1008 1½ 50

PAN HEAD SQUARE/PHILLIPS SELF-DRILLING & TAPPING SCREWS

steel Zinc • 410 STAINLESS


PKG.STD. PKG./


TRADE LIST PRICE PER#2 DRILL POINT STEEL ZINCJTEKS1 80323 8 ½ .36 100/500 8.51/cJTEKS1V 97901 8 ½ 1.80 500 8.26/cJTEKS3 80324 8 5/8 .43 100/500 9.04/cJTEKS3V 97903 8 5/8 2.15 500 8.77/cJTEKS2 80325 8 ¾ .48 100/500 10.16/cJTEKS2V 97902 8 ¾ 2.40 500 9.86/cJTEKS14 80326 8 1 .57 100/500 11.32/cJTEKS14V 97914 8 1 2.85 500 10.98/cJTEKS5 80327 10 ½ .51 100/500 13.43/cJTEKS5V 97905 10 ½ 2.55 500 13.03/cJTEKS8 80328 10 5/8 .57 100/500 16.42/cJTEKS8V 97908 10 5/8 2.85 500 15.93/cJTEKS6 80329 10 ¾ .66 100/500 14.28/cJTEKS6V 97906 10 ¾ 3.30 500 13.85/cJTEKS7 80330 10 1 .75 100/500 15.59/cJTEKS7V 97907 10 1 3.75 500 15.12/cJTEKS15 80331 10 1¼ .85 100/500 17.25/cJTEKS15V 97915 10 1¼ 4.25 500 16.73/cJTEKS19 80332 10 1½ 1.00 100/500 19.69/cJTEKS19V 97919 10 1½ 5.00 500 19.10/c#2 DRILL POINT 410 STAINLESSJTEKS15SS 99015 10 1¼ .85 100/500 47.74/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

DriveSquareDriveSquareDriveSquare

FLAT HEAD PHILLIPS SELF-DRILLING & TAPPING SCREWS

410 STAINLESS

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PER#2 DRILL POINTJTEKDF1SS 91001 8 1 .44 100/500 22.76/cJTEKDF2SS 91002 10 1½ .82 100/500 52.42/cother sizes and quantities available by request

Phillips

55

A

SCREWS


PAN HEAD PHILLIPS SELF-DRILLING & TAPPING SCREWS

steel Zinc • 410 STAINLESS

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PER#2 DRILL POINT STEEL ZINCJTEK34P 82294 6 3/8 .22 100/500 9.22/cJTEK10P 80333 6 ½ .25 100/500 8.18/cJTEK10PV 97710 6 ½ 1.25 500 7.93/cTEK10PB 62410 6 ½ 20.78 10000 76.89/mJTEK11P 80334 6 ¾ .32 100/500 9.22/cJTEK11PV 97711 6 ¾ 1.41 500 8.94/cJTEK12P 80335 6 1 .39 100/500 9.82/cJTEK12PV 97712 6 1 1.95 500 9.52/cJTEK1P 80336 8 ½ .36 100/500 8.58/cJTEK1PV 97701 8 ½ 1.65 500 8.32/cTEK1P5M 74705 8 ½ 15.82 5000 80.65/mTEK1P10M 75706 8 ½ 31.23 10000 78.23/mJTEK2P 80337 8 ¾ .49 100/500 9.22/cJTEK2PV 97702 8 ¾ 2.45 500 8.95/cJTEK16P 90080 8 5/8 .41 100/500 14.87/cJTEK14P 80338 8 1 .55 100/500 10.19/cJTEK14PV 97714 8 1 2.75 500 9.88/cJTEK114P 77714 8 1¼ .61 100/500 11.91/cJTEK15P 80339 8 1½ .74 100/500 13.48/cJTEK15PV 97715 8 1½ 3.70 500 13.07/cJTEK82P 77682 8 2 .94 100/500 27.59/cJTEK4P 80340 10 ½ .51 100/500 16.87/cJTEK4PV 97704 10 ½ 2.55 500 16.36/cTEK4PM 94404 10 ½ 4.46 1000 158.69/mJTEK3P 80341 10 ¾ .61 100/500 13.34/cJTEK3PV 97703 10 ¾ 3.05 500 12.94/cJTEK7P 80342 10 1 .75 100/500 14.35/cTEK7PB 11597 10 1 1.88 250 13.92/cJTEK7PV 97707 10 1 3.75 500 13.50/cJTEK18P 80343 10 1¼ .87 100/500 16.17/cJTEK18PV 97718 10 1¼ 4.35 500 15.68/cJTEK19P 80344 10 1½ .98 100/500 17.43/cJTEK19PV 97719 10 1½ 4.90 500 16.91/cJTEK20P 81311 10 2 1.23 100/500 16.54/c#2 DRILL POINT 410 STAINLESSJTEK10PSS 84560 6 ½ .24 100/500 7.20/cJTEK11PSS 84561 6 ¾ .31 100/500 8.48/cJTEK1PSS 84563 8 ½ .38 100/500 19.84/cJTEK2PSS 84564 8 ¾ .46 100/500 23.29/cJTEK14PSS 84565 8 1 .54 100/500 23.25/cJTEK4PSS 84567 10 ½ .47 100/500 32.06/cJTEK3PSS 84553 10 ¾ .61 100/500 47.09/cJTEK7PSS 84569 10 1 .72 100/500 51.93/cJTEK19PSS 84571 10 1½ 1.03 100/500 56.11/cother sizes and quantities available by request

PANPhillipsPhillips

A

SCREWS


HEX “HIGH HAT” WASHER HEAD SELF-DRILLING & TAPPING SCREWS

steel ZincFor Maximum drilling engagement “don’t slip When you drive”

PART# UPC# DIAMETER LENGTHDRILL

POINT SIZEWT. PER

PKG.STD. PKG/

MSTR SLEEVESUGGESTED

TRADE LIST PRICE PER100 PACKJTEKDHH6 19728 10 ¾ #3 .65 100 8.32/cJTEKDHH7 19732 10 1 #3 .77 100 8.96/cJTEKDHH19 19736 10 1½ #3 1.05 100 12.88/c1000 PACKJTEKDHH6M 19729 10 ¾ #3 6.50 1000 78.96/mJTEKDHH7M 19733 10 1 #3 7.70 1000 85.12/mJTEKDHH19M 19737 10 1½ #3 10.50 1000 122.36/mBULK PACKTEKDHH65M 19730 10 ¾ #3 32.50 5000 75.02/mTEKDHH75M 19734 10 1 #3 38.50 5000 80.86/mTEKDHH195M 19738 10 1½ #3 52.50 5000 116.33/mTEKDHH6B 19731 10 ¾ #3 65.00 10000 71.30/mTEKDHH7B 19735 10 1 #3 77.00 10000 77.00/mTEKDHH19B 19739 10 1½ #3 105.00 10000 110.60/m

We believe Metallics has the largest ratio of American made to foreign produced product of any other American fastener company.

SERVING THE ELECTRICAL, PLUMBING, HEATING AND AIR CONDITIONING DISTRIBUTOR MARKETPLACE.

57

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PER1/4 HEAD #2 DRILL POINT QTEKD1 39120 8 ½ .38 100/500 11.94/cQTEKD1V 98001 8 ½ 1.60 500 11.58/cQTEKD2 39121 8 ¾ .48 100/500 13.01/cQTEKD2V 98002 8 ¾ 2.40 500 12.62/cQTEKD14 39122 8 1 .58 100/500 13.80/cQTEKD14V 98014 8 1 2.90 500 13.39/cQTEKD4 39123 10 ½ .41 100/500 14.38/cQTEKD4V 98004 10 ½ 2.05 500 13.95/cQTEKD3 39124 10 ¾ .52 100/500 14.88/cQTEKD3V 98003 10 ¾ 2.60 500 14.42/c5/16 HEAD #2 DRILL POINTQTEKD5 39125 10 ½ .54 100/500 14.38/cQTEKD5V 98005 10 ½ 2.70 500 13.95/cQTEKD5M 39141 10 ½ 5.80 1000 135.32/mQTEKD17 39126 10 5/8 .59 100/500 14.88/cQTEKD17V 98017 10 5/8 2.88 500 14.42/cQTEKD17M 39133 10 5/8 5.40 1000 139.87/mQTEKD6 39127 10 ¾ .66 100/500 15.56/cQTEKD6V 98006 10 ¾ 3.30 500 15.09/cQTEKD6M 39142 10 ¾ 7.00 1000 146.37/mQTEKD7 39128 10 1 .79 100/500 17.21/cQTEKD7V 98007 10 1 3.95 500 16.69/cQTEKD7M 39143 10 1 8.70 1000 161.89/mQTEKD18 39129 10 1¼ .91 100/500 18.48/cQTEKD18V 98018 10 1¼ 4.55 500 17.93/cQTEKD18M 39134 10 1¼ 9.90 1000 173.92/mQTEKD19 39130 10 1½ 1.05 100/500 19.90/cQTEKD19V 98019 10 1½ 5.25 500 19.30/cQTEKD19M 39132 10 1½ 11.40 1000 187.24/m5/16 HEAD #3 DRILL POINTQTEKD12 39135 10 ¾ .69 100/500 15.81/cQTEKD12V 98012 10 ¾ 3.45 500 15.33/cQTEKD13 39136 10 1 .81 100/500 14.31/cQTEKD13V 98013 10 1 4.05 500 13.88/cQTEKD20 39137 12 ¾ .77 100/500 17.29/cQTEKD20V 98020 12 ¾ 3.85 500 16.77/cQTEKD8 39138 12 1 .95 100/500 19.57/cQTEKD8V 98008 12 1 4.75 500 18.98/cother sizes and quantities available by request

HEX HEAD QuaDrive SELF-DRILLINGAND TAPPING SCREWS

FIRST IN THE WORLDsteel Zinc

Four drives in one head • Introduced in 1999



★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

AND TAPPINGAND TAPPINGSlotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex


A

SCREWS


HEX HEAD SELF-DRILLING/TAPPING SCREWS INDENTED HEX WASHER

STEEL zINC • 410 STAINLESS

Slotted

Phillips

SquareDrive

Hex

HEX HEAD SELF-DRILLING/TAPPING SCREWS

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERSTEEL ZINC1/4 HEAD #2 DRILL POINTJTEKD26 83324 6 3/8 .28 100/500 6.08/cJTEKD25 83323 6 ½ .32 100/500 3.70/cJTEKD27 83326 6 1 .44 100/500 6.89/cJTEKD1 80345 8 ½ .37 100/500 8.83/cJTEKD1V 97801 8 ½ 1.69 500 8.55/cTEKD175 11067 8 ½ 2.78 750 8.27/cJTEKD1M 81450 8 ½ 3.22 1000 80.28/mTEKD15M 33914 8 ½ 15.66 5000 77.88/mJTEKD16 80346 8 5/8 .44 100/500 9.04/cJTEKD16V 97816 8 5/8 1.42 500 8.78/cTEKD16M 33016 8 5/8 3.84 1000 85.13/mJTEKD2 80347 8 ¾ .46 100/500 9.62/cJTEKD2V 97802 8 ¾ 2.30 500 9.33/cJTEKD2M 81452 8 ¾ 4.11 1000 90.45/mTEKD25M 33915 8 ¾ 20.35 5000 87.75/mTEKD210M 33916 8 ¾ 41.61 10000 85.13/mJTEKD14 80348 8 1 .54 100/500 10.19/cJTEKD14V 97814 8 1 2.70 500 9.90/cJTEKD114 90661 8 1¼ .36 50/250 10.19/cJTEKD15 80349 8 1½ .78 100/500 12.82/cJTEKD15V 97815 8 1½ 3.63 500 12.45/cJTEKD82 83382 8 2 1.02 100/500 25.61/cJTEKD4 80350 10 ½ .46 100/500 10.90/cJTEKD4V 97804 10 ½ 2.30 500 10.58/cJTEKD4M 81455 10 ½ 4.60 1000 102.58/mJTEKD3 80351 10 ¾ .54 100/500 10.99/cJTEKD3V 97803 10 ¾ 2.70 500 10.65/cJTEKD3M 81456 10 ¾ 5.40 1000 103.30/m5/16 HEAD #2 DRILL POINT JTEKD5 80352 10 ½ .52 100/500 10.86/cJTEKD5V 97805 10 ½ 2.50 500 10.55/cJTEKD5M 81457 10 ½ 5.00 1000 102.35/mTEKD55M 33919 10 ½ 22.76 5000 91.25/mJTEKD17 80353 10 5/8 .57 100/500 11.69/cJTEKD17V 97817 10 5/8 2.85 500 11.33/cJTEKD6 80354 10 ¾ .64 100/500 12.70/cJTEKD6V 97806 10 ¾ 3.06 500 12.30/cTEKD675 11068 10 ¾ 4.76 750 11.93/cJTEKD6M 81459 10 ¾ 6.05 1000 115.75/mTEKD65M 33917 10 ¾ 29.78 5000 112.28/mTEKD610M 33810 10 ¾ 59.10 10000 108.90/mJTEKD7 80355 10 1 .76 100/500 13.25/cJTEKD7V 97807 10 1 3.75 500 12.85/cJTEKD7M 81460 10 1 7.50 1000 124.95/mTEKD75M 33918 10 1 36.59 5000 121.20/mother sizes and quantities available by request


59

A

SCREWS


COnTInuEd


PKG.STD. PKG./


TRADE LIST PRICE PER5/16 HEAD #2 DRILL POINT JTEKD18 80356 10 1¼ .88 100/500 14.13/cJTEKD18V 97818 10 1¼ 4.45 500 13.73/cJTEKD19 80357 10 1½ 1.04 100/500 15.60/cJTEKD19V 97819 10 1½ 4.76 500 15.13/cJTEKD24 83322 10 2½ 1.57 100 12.91/c JTEKD23 83321 10 3 1.86 100 49.96/cJTEKD28 83327 12 ½ .67 100/500 16.63/c5/16 HEAD #3 DRILL POINT JTEKD12 80358 10 ¾ .62 100/500 13.71/cJTEKD12V 97812 10 ¾ 3.10 500 13.30/cTEK12M 39003 10 ¾ 6.20 1000 129.00/mTEKD125M 32985 10 ¾ 29.65 5000 127.30/mTEKD1210M 33920 10 ¾ 59.30 10000 126.13/mJTEKD13 80359 10 1 .75 100/500 14.93/cJTEKD13V 97813 10 1 3.75 500 14.48/cTEK13M 39004 10 1 7.50 1000 140.40/mTEKD135M 33921 10 1 37.50 5000 138.20/mTEKD1310M 33922 10 1 75.00 10000 136.05/mJTEKD22 80360 10 2 1.28 100/500 21.83/cJTEKD22V 97822 10 2 6.40 500 21.18/cJTEKD20 80361 12 ¾ .81 100/500 17.00/cJTEKD20V 97820 12 ¾ 4.05 500 16.50/cJTEKD20M 56087 12 ¾ 7.68 1000 160.05/mTEKD20B 62214 12 ¾ 40.50 5000 155.25/mJTEKD8 80362 12 1 1.00 100/500 19.29/cJTEKD8V 97808 12 1 5.00 500 18.73/cJTEKD8M 81467 12 1 10.00 1000 181.63/mJTEKD35 83335 12 1¼ 1.03 100/500 19.50/cJTEKD21 80363 12 1½ 1.33 100/500 22.28/cJTEKD21V 97821 12 1½ 6.65 500 21.63/cJTEKD32 80364 12 2 1.71 100 25.00/cJTEKD32V 97832 12 2 8.55 500 24.25/cJTEKD32M 53078 12 2 17.10 1000 235.23/mJTEKD12212 90655 12 2½ 2.07 100 30.37/cJTEKD30 83313 12 3 2.29 100 49.20/c5/16 HEAD #4 DRILL POINTJTEKD31 83331 12 7/8 .88 100/500 23.52/c3/8 HEAD #3 DRILL POINTJTEKD9 80365 14 ¾ 1.23 100/500 22.15/cJTEKD9V 97809 14 ¾ 6.15 500 21.48/cJTEKD9M 81470 14 ¾ 12.30 1000 208.30/mTEKD95M 33923 14 ¾ 61.50 5000 202.05/mJTEKD10 80366 14 1 1.41 100/500 25.21/cJTEKD10V 97810 14 1 7.05 500 24.45/cTEK10M 39011 14 1 14.10 1000 237.18/mTEKD105M 33983 14 1 70.50 5000 230.08/mJTEKD37 83337 14 1¼ 1.69 100/500 25.91/cTEKD37M 33037 14 1¼ 17.00 1000 251.23/mJTEKD11 80367 14 1½ 1.75 100/500 28.26/cJTEKD11V 97811 14 1½ 9.72 500 27.40/cTEK11M 39012 14 1½ 17.50 1000 265.78/mJTEKD34 80368 14 2 2.44 100 44.90/cJTEKD34V 97834 14 2 12.20 500 43.53/cTEKD34M 61137 14 2 24.40 1000 422.20/mJTEKD90 83390 14 2½ 2.84 100 54.63/cJTEKD36 83336 14 3 3.41 100 56.28/cJTEKD99 83399 14 4 4.39 100 72.95/cother sizes and quantities available by request

HEX HEAD SELF-DRILLING & TAPPING SCREWS INDENTED HEX WASHER

STEEL zINC • 410 STAINLESS

Slotted

Phillips

SquareDrive

Hex

HEX HEAD SELF-DRILLING & TAPPING SCREWS

Hex


A

SCREWS


Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PER410 STAINLESS1/4 HEAD #2 DRILL POINTJTEKD1SS 85211 8 ½ .38 100/500 22.22/cJTEKD2SS 85213 8 ¾ .50 100/500 22.86/cJTEKD14SS 85214 8 1 .57 100/500 29.95/cJTEKD15SS 85215 8 1½ .78 100/500 55.10/c5/16 HEAD #2 DRILL POINTJTEKD5SS 85220 10 ½ .43 100/500 52.98/cJTEKD6SS 85222 10 ¾ .63 100/500 39.84/c5/16 HEAD #3 DRILL POINTJTEKD4SS 53080 10 ½ .40 100/500 34.10/cJTEKD12SS 85227 10 ¾ .64 100/500 38.74/cJTEKD7SS 85223 10 1 .78 100/500 59.44/cTEKD7SSM 11610 10 1 7.51 1000 398.13/mJTEKD18SS 85244 10 1¼ .91 100/500 48.20/cJTEKD19SS 85255 10 1½ 1.02 100/500 56.31/cJTEKD8SS 85217 10 1¾ 1.14 100/500 86.40/cJTEKD22SS 85229 10 2 1.26 100/500 79.25/cJTEKD27SS 85243 10 3 1.78 100 103.17/cJTEKD20SS 85230 12 ¾ .85 100/500 57.74/cJTEKD29SS 79629 12 1 1.00 100/500 56.80/cJTEKD21SS 85231 12 1½ 1.34 100/500 71.50/cJTEKD92SS 79692 14 1½ 2.00 100/500 97.35/cJTEKD93SS 79693 14 2 2.44 100 100.43/c3/8 HEAD #3 DRILL POINTJTEKD9SS 85235 14 ¾ 1.25 100/500 79.63/cJTEKD10SS 85236 14 1 1.42 100/500 68.24/cJTEKD23SS 85238 14 3 3.32 100 162.61/cTEKD44SSB 61175 14 3½ 54.65 1425 148.61/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

HEX HEAD SELF DRILLING SCREW KIT

410 STAINLESS Kit contains #8 and #10 hex

washer head with 1/4 and 5/16 nut setters.410 Stainless

PART# UPC# DIAMETER LENGTH HEAD SIZEWT. PER

PKG.STD. PKG./



TEKDK1SS 39621

8 ½ ¼

1.64

100

72.89/ea kit

8 ¾ ¼ 508 1 ¼ 40

10 ½ 5/16 5010 ¾ 5/16 3510 1 5/16 30

¼ Driver - 15/16 driver - 1

COnTInuEd

HEX HEAD SELF-DRILLING & TAPPING SCREWS INDENTED HEX WASHER

STEEL zINC • 410 STAINLESSHex

HEX HEAD SELF-DRILLING & TAPPING SCREWSHex

61

A

SCREWS


PART# UPC# DIAMETER LENGTH HEAD SIZE WT. PER

PKG.STD. PKG./


TRADE LIST PRICE PERWITH BONDED WASHERTGW9151 25735 9-15 1 ¼ .43 50/250 26.82/cTGW9151M 72683 9-15 1 ¼ 7.48 1000 260.15/mTGW91515M 14297 9-15 1½ ¼ 9.55 1000 261.21/mWITHOUT WASHERTG9151 25740 9-15 1 ¼ .36 50/250 13.80/cother sizes and quantities available by request

HEX HEAD METAL TO WOOD SCREWS

STEEL zINC/ALL-WEATHER COATINGself-drilling fasteners for attaching roof and wall metal panels over insulation

to wood framing. Gimlet drill point. Available with or without washer.

Provides excellent corrosion resistance and lower tapping torque.

Slotted

Phillips

SquareDrive

HexHexHex

HEX HEAD HEAVY DUTY DRILL SCREWS

HeaVY dutY steel-to-steel aPPlication STEEL zINC/ALL-WEATHER COATING

self-drilling fasteners for structural steel or bar joists up to ½ thickMilled drill point • Corrosion Resistant Finish 1000 Hours of Salt Spray Resistance

• Unique double fluted point dramatically improves drilling performance over conventional drill screws.

• Attaches items directly to structural steel or bar joist.• Corrosion Resistant Finish 1000 Hours of Salt Spray Resistance.• Engineered for faster drilling with less effort.• The only fastener recommended for hanging jack chain without pre-drilling.• We recommend using JW113 Fender Washer ¼ x 1 with heavy duty drill

screw to ensure proper grip on jack chain.

elf-drilling fasteners for structural steel or bar joists up to ½ thick

PART#JAR


PKG.STD. PKG./


TRADE LIST PRICE PER5/16 HEAD #5 DRILL POINT CORROSION RESISTANTTXV12114 25730 12-24 1¼ .66 50/250 118.60/cTXV12114B 62181 12-24 1¼ 31.00 2500 388.75/mTXV12112 25728 12-24 1½ .78 50/250 52.62/cTXV12200 25925 12-24 2 .97 50 74.61/cTXV14400 25780 ¼-20 4 4.43 100 105.95/c5/16 HEAD #5 DRILL POINT STEEL ZINCTXV12114Z 25785 12 1¼ 1.08 100/500 38.70/cTXV123Z 25722 12 3 2.31 100 46.05/cother sizes and quantities available by request

elf-drilling fasteners for attaching roof and wall metal panels over insulation elf-drilling fasteners for attaching roof and wall metal panels over insulation

Metallics was the first in America to offer the Combo Head — 1985

A

SCREWS


HEX HEAD BONDED SEALING WASHER SELF-DRILLING

STEEL zINC/ALL-WEATHER COATING economical fasteners for applications requiring a weather-tight seal

PART# UPC# DIAMETER LENGTHDRILL

POINT SIZEWT. PER

PKG.STD. PKG/


TRADE LIST PRICE PERTXW1034 25811 10-16 ¾ #3 .41 100 24.50/cTXW10112 25809 10-16 1½ #3 .79 100 29.38/cTXW1234 25765 12-14 ¾ #3 .62 50 21.25/cTXW12114 25806 12-14 1¼ #3 .84 100 29.88/cTXW12112 25804 12-14 1½ #3 .92 100 31.00/cTXW121 25807 12-14 1 #3 1.32 100 28.63/cTXW122 25803 12-14 2 #3 2.06 100 35.25/cTXW123 25802 12-14 3 #3 2.81 100 47.13/cTXW1278 25808 12-24 7/8 #4 1.27 100 36.00/cTXW1224112 25799 12-24 1½ #5 1.64 100 58.20/cTXW1478 25770 ¼ -14 7/8 #1 .69 50 38.75/cTXW1434 25798 ¼ -14 ¾ #3 1.72 100 38.38/cTXW141 25796 ¼ -14 1 #3 1.86 100 39.13/cTXW14114 25795 ¼ -14 1¼ #3 2.07 100 39.75/cTXW14112 25794 ¼ -14 1½ #3 2.31 100 44.00/cTXW142 25793 ¼ -14 2 #3 2.89 100 49.00/c

Slotted

Phillips

SquareDrive

Hex

• Drill point has precise cutting edges to improve drill performance with less effort.• Special winged fasteners ream a hole in wood preventing thread engagement during drilling.• Wafer head design has a large bearing surface ideal for plywood.• Flat head design countersinks and seats flush in wood.• Corrosion Resistant Finish 1000 Hours of Salt Spray Resistance.

FLAT HEAD WOOD TO METAL SELF-DRILLING SCREWS

STEEL zINC/ALL-WEATHER COATING Fast, efficient attachment of wood to steel framing with no pre-drilling.

Must be used in 16 gauge steel or greater for engagement.

Slotted

Phillips

SquareDrive

Hex

PART#

UPC#

DIAMETER

LENGTH HEAD STYLE DRILL POINT

WT. PER PKG.

STD. PKG./ MSTR. SLEEVE

SUGGESTED TRADE LIST PRICE PER

TW101716 25745 10-24 17/16 Phillips/Flat #3 .53 50 57.84/cTW12212 25750 12-24 2¾ Phillips/Flat #4 1.22 50 122.40/cother sizes and quantities available by request

If you can’t find the fastener you are looking for, call and experience the Metallics difference. ?’s

Call Us. 1-800-243-8272

63

A

SCREWS


PART# UPC#

DIAMETER LENGTHSIZE/

HEAD STYLE DRILL POINT

WT. PER PKG.



WITHOUT WASHERTX1234 25755 12-14 ¾ 5/16 Hex #3 .44 50/250 45.78/cTX1478 25760 ¼ -14 7/8 3/8 Hex #1 .54 50/250 49.26/cWITH BONDED WASHERSTXW1234 25765 12-14 ¾ 5/16 Hex #3 .62 50/250 42.50/cTXW1224114 25791 12-24 1¼ 5/16 Hex #5 1.45 100/500 44.28/cTXW1478 25770 ¼ -14 7/8 3/8 Hex #1 .69 50/250 38.76/c410 STAINLESS STEEL WITH BONDED WASHERTX12114SS 25775 12-14 1¼ 5/16 Hex #3 .81 50/250 155.42/cTX12114SSB 25732 12-14 1¼ 5/16 Hex #3 4.05 250 150.00/cWITH NEO-EPDM WASHER No. 3 POINT STEEL ZINCJTXW381Z 83706 3/8-12 1 9/16 Hex #3 2.38 50 71.54/cother sizes and quantities available by request

HEX HEAD METAL TO METAL SELF-DRILLING SCREWS

STEEL zINC/ALL-WEATHER COATING Fasteners for attaching standing roof clips and wall/roof metal panels

to steel framing (purlin/bar joist).

Slotted

Phillips

SquareDrive

Hex

• Milled drill point• Available with or without bonded washer.• Corrosion Resistant Finish 1000 Hours of Salt Spray Resistance.

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERWSK10 41425 #10 Wood Screw kit - 302 pieces 2.55 1 38.92/ea kitWSK10CD1 41426 #10 Wood Screw kit Display Case-14 kits total 35.70 1 474.32/ea

FLAT HEAD PHILLIPSWOOD SCREW KIT & DISPLAY

302 PIECE kIT • STEEL zINC

WSK10flat Head Phillips Wood screw - Steel zinc (302 pc kit)- 150 (10 x 1)- 86 (10 x 1½ )- 66 (10 x 2)

WSK10CD1cardboard display case contains 14 kits - includes a 13% savings on each kit!

Helpful Hints From Metallics: Did You forget to ask? GOT FASTENERS?

A

SCREWS


FLAT HEAD PHILLIPSWOOD SCREWS

steel Zinc

Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJFWP120 88120 4 ½ .11 100/500 21.64/cJFWP61 84661 4 ¾ .20 100/500 6.74/cJFWP62 84662 4 1 .24 100/500 9.28/cJFWP08 81849 5 ½ .18 100/500 8.90/cJFWP69 84669 5 ¾ .25 100/500 11.13/cJFWP09 81850 5 1 .31 100/500 11.67/cJFWP9 84609 6 ½ .27 100/500 5.58/cJFWP10 80369 6 ¾ .28 100/500 5.89/cJFWP10M 81852 6 ¾ 2.53 1000 57.25/mJFWP11 80370 6 1 .35 100/500 6.31/cJFWP11M 81857 6 1 3.50 1000 61.13/mJFWP12 81853 6 1¼ .43 100/500 6.40/cJFWP13 84613 6 1½ .49 100/500 7.87/cJFWP14 81855 6 2 .64 100/500 11.13/cJFWP17 84617 8 ½ .31 100/500 5.68/cJFWP18 80371 8 ¾ .34 100/500 6.31/cJFWP19 80372 8 1 .48 100/500 6.52/cJFWP20 80373 8 1¼ .61 100/500 7.09/cJFWP21 80374 8 1½ .67 100/500 7.93/cJFWP65 84665 8 1¾ .69 100/500 25.09/cJFWP22 80375 8 2 .84 100/500 10.93/cFWP22M 81859 8 2 8.45 1000 104.03/mJFWP23 84623 8 2½ 1.05 100/500 13.24/cJFWP24 80376 8 3 1.34 100 18.94/cJFWP25 84625 8 3½ 1.68 100 22.46/cJFWP27 84627 10 ½ .40 100/500 5.96/cJFWP28 80377 10 ¾ .53 100/500 7.09/cJFWP29 80378 10 1 .67 100/500 7.81/cJFWP30 80379 10 1¼ .72 100/500 9.18/cJFWP31 80380 10 1½ .99 100/500 10.73/cJFWP67 84667 10 1¾ 1.12 100/500 46.73/cJFWP32 80381 10 2 1.12 100/500 12.63/cJFWP33 80382 10 2½ 1.59 100 16.46/cJFWP34 84634 10 3 1.63 100 22.36/cJFWP35 84635 10 3½ 2.33 100 35.00/cJFWP36 84636 10 4 2.51 100 42.73/cJFWP39 84639 12 1 .91 100 10.64/cJFWP40 80383 12 1¼ .96 100/500 11.98/cJFWP41 80384 12 1½ 1.30 100/500 13.14/cJFWP42 80385 12 2 1.45 100/500 14.74/cJFWP43 80386 12 2½ 1.74 100 26.53/cJFWP44 84644 12 3 2.07 100 25.09/cJFWP45 84645 12 3½ 2.89 100 33.99/cJFWP46 84646 12 4 3.68 100 47.07/cJFWP49 84649 14 1½ 1.67 100/500 16.80/cJFWP47 84647 14 1¾ 1.77 100/500 19.22/cJFWP48 84648 14 2 2.05 100 20.92/cJFWP89 84689 14 2½ 2.28 100 21.00/cJFWP50 84650 14 3 3.07 100 31.05/cother sizes and quantities available by request

65

A

SCREWS


FLAT HEAD PHILLIPS WOOD SCREW

18-8 STAINLESS


PKG.STD. PKG./


TRADE LIST PRICE PERJFWP9SS 92209 6 ½ .27 100 17.63/cJFWP10SS 92210 6 ¾ .28 100 24.44/cJFWP11SS 92211 6 1 .35 100 30.57/cJFWP12SS 92212 6 1¼ .48 100 38.10/cJFWP13SS 92213 6 1½ .49 100 25.16/cJFWP14SS 92214 6 2 .55 100 53.91/cJFWP18SS 92218 8 ¾ .40 100 30.57/cJFWP19SS 92219 8 1 .50 100 45.66/cJFWP21SS 92221 8 1½ .67 100 54.63/cJFWP65SS 92315 8 1¾ .69 100 65.41/cJFWP22SS 92222 8 2 .84 100 50.31/cJFWP28SS 92228 10 ¾ .53 100 25.70/cJFWP29SS 92229 10 1 .67 100 35.59/cJFWP30SS 92230 10 1¼ .72 100 58.22/cJFWP31SS 92231 10 1½ 1.04 100 61.81/cJFWP67SS 92317 10 1¾ 1.12 100 79.06/cJFWP32SS 92232 10 2 1.12 100 86.25/cJFWP40SS 92240 12 1¼ 1.20 100 83.38/cJFWP44SS 92244 12 3 2.40 100 143.46/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

FLAT HEAD PHILLIPS WOOD SCREW

BRASS


PKG.STD. PKG./


TRADE LIST PRICE PERJFWPB45 73145 4 ½ .17 100 8.72/cJFWPB61 73161 4 ¾ .21 100 11.62/cJFWPB62 73162 4 1 .27 100 14.43/cJFWPB63 73163 4 1¼ .32 100 22.92/cJFWPB64 73164 4 1½ .37 100 27.83/cJFWPB12 73112 6 1¼ .61 100 29.07/cJFWPB18 73118 8 ¾ .34 100 28.46/cJFWPB19 73119 8 1 .48 100 30.35/cJFWPB20 73120 8 1¼ .61 100 37.12/cJFWPB21 73121 8 1½ .75 100 43.56/cJFWPB22 73122 8 2 .91 100 60.43/cJFWPB31 73131 10 1½ .89 100 58.13/cJFWPB34 73134 10 3 1.82 100 143.41/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

A

SCREWS


BUGLE HEAD PHILLIPS COARSE THREAD DRYWALL SCREWS

STEEL BLACk PHOSPHATE

Slotted

Phillips

SquareDrive

Hex UGLEBUGLEBUGLEPhillips


PKG.STD. PKG./


TRADE LIST PRICE PER100 PACKJDWC1C 90501 6 1 .35 100/500 5.31/cJDWC3C 90503 6 1¼ .43 100/500 5.41/cJDWC4C 90504 6 15/8 .51 100/500 6.38/cJDWC5C 90505 6 2 .60 100/500 8.67/cJDWC6C 90506 6 2¼ .70 100/500 9.34/cJDWC7C 90507 8 2½ 1.00 100/500 12.08/cJDWC9C 90509 8 3 1.12 100/500 14.13/cJDWC11C 90511 10 4 2.12 100 18.90/cJDWC13C 74013 10 5 2.48 100 103.13/c500 PACKJDWC3V 90513 6 1¼ 2.15 500 5.25/cDWC4V 91464 6 15/8 2.38 500 6.18/c1000 PACK IN SQUARE PLASTIC JAR — 1 Power Bit included FREE in 1000 PackDWC1M 90331 6 1 3.03 1000 49.48/mDWC3M 90333 6 1¼ 3.74 1000 47.61/mDWC4M 90334 6 15/8 4.84 1000 57.99/mDWC5M 90335 6 2 5.63 1000 82.10/mDWC9M 90339 8 3 10.80 1000 121.78/mBULK PACK IN CARTON — 3 Power Bits included FREE in Bulk PackDWC3B 83308 6 1¼ 29.99 8000 24.11/mDWC4B 83309 6 15/8 23.40 5000 41.88/mDWC5B 83515 6 2 19.29 3500 51.58/mJDWC6B 90517 6 2¼ 1.75 250 9.08/cDWC6B 83516 6 2¼ 18.57 3000 57.14/mDWC7B 83517 8 2½ 22.98 2500 76.00/mDWC75B 15556 8 2½ 50.00 5000 73.00/mDWC9B 83519 8 3 22.25 2000 81.55/mDWC10B 83520 10 3½ 27.05 1500 149.82/mother sizes and quantities available by request

BUGLE HEAD PHILLIPS FINE THREAD DRYWALL SCREWS


Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJDWS2MD 61148 6 11/8 3.80 1000 36.58/mJDWS3CD 76503 6 1¼ .46 100 11.92/cDWS3MD 76843 6 1¼ 3.75 1000 100.72/mJDWS4CD 76504 6 15/8 .56 100 12.66/cDWS4MD 76844 6 15/8 4.75 1000 107.50/mJDWS5CD 76505 6 2 .71 100 14.17/cDWS5MD 76845 6 2 5.52 1000 120.02/m



★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

67

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PER100 PACKJDWS75C 75975 6 ¾ .31 100/500 4.15/cJDWS1C 80387 6 1 .37 100/500 4.46/cJDWS3C 80388 6 1¼ .41 100/500 4.51/cJDWS4C 80389 6 15/8 .50 100/500 5.31/cJDWS5C 80390 6 2 .56 100/500 7.30/cJDWS6C 80391 6 2¼ .69 100/500 7.78/cJDWS7C 80392 8 2½ .98 100/500 12.08/cJDWS9C 80393 8 3 1.16 100 14.13/cJDWS10C 84099 10 3½ 1.86 100 16.17/c500 PACKDWS1V 27115 6 1 1.83 500 4.34/cDWS3V 27043 6 1¼ 1.93 500 4.37/cJDWS4V 76854 6 15/8 5.03 500 5.15/cDWS5V 27045 6 2 2.87 500 7.09/cDWS9V 27049 8 3 5.43 500 13.71/c1000 PACK IN SQUARE PLASTIC JAR – #2 DRIVE POWER BIT INCLUDED FREE IN 1000 PACK – SAVE OVER 100 PACKDWS1M 27001 6 1 3.65 1000 40.96/mDWS3M 27007 6 1¼ 3.75 1000 41.81/mDWS4M 27010 6 15/8 4.70 1000 49.56/mDWS5M 27013 6 2 5.52 1000 63.04/mDWS6M 27016 6 2¼ 6.40 1000 72.52/mDWS7M 27019 8 2½ 6.43 1000 112.29/mDWS9M 27025 8 3 10.55 1000 131.54/mBULK PACK IN CARTON – THREE #2 DRIVE POWER BITS INCLUDED FREE IN BULK PACK – SAVE OVER 100 PACKDWS1B 27002 6 1 36.50 10000 35.24/mDWS3B 27008 6 1¼ 32.80 8000 36.06/mDWS4B 27011 6 15/8 23.40 5000 42.62/mDWS5B 27014 6 2 21.35 3500 58.19/mDWS55B 15530 6 2 26.15 5000 35.20/mDWS6B 27017 6 2¼ 24.00 3000 62.29/mDWS7B 27020 8 2½ 27.00 2500 96.71/mDWS75B 15535 8 2½ 45.60 5000 87.45/mDWS9B 27026 8 3 26.00 2000 113.11/mDWS93B 15543 8 3 29.00 3000 69.64/mDWS10B 10695 10 3½ 19.50 10000 149.82/mDWS11B 27311 10 5 13.89 200 59.40/cother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

Phillips

BUGLE HEAD PHILLIPS FINE THREAD DRYWALL SCREWS


METALLICSTrim Head Screw Kit

Catalog # THSK1

BLACK PHOSPHATE FINISH

SQUARE DRIVE

TRIM HEAD SHARP POINT

FOR ATTACHING WOOD TRIM

TO WOOD OR METAL STUDS

�

�

�

�

StockNumber

UPC# Description Weightper Kit

81794 1.5 lbs.

THSK1 Contains

FOR INFORMATION CALL

METALLICS EAST AT (800) 243-8272 OR METALLICS WEST AT (800) 269-5183

Metallics Inc.

SuggestedTrade List

$23.20THSK1100 pcs #6x1, 75pcs#6x1-5/8

50 pcs #6x2-1/4 50 pcs #8x3

Metallics & Avanti Screw, Inc.Where Manufacturing Quality is Job One!

A

SCREWS


Slotted

Phillips

SquareDrive

Hex

PART# UPC# DIAMETER LENGTH/ITEMWT.

EACH QTY. STD. PKG.

MSTR. CARTON SUGGESTED


DWSK1 12712

6 1

1.40

75

1/25 30.19/ea kit

6 1¼ 506 15/8 406 2 308 2½ 208 3 202 2 Phillips Power Bit 1


BUGLE HEAD FINE THREAD DRYWALL SCREW KIT


UPC# DIAMETER

PhillipsPhillips


PKG.STD. PKG./


TRADE LIST PRICE PER100 PACK – BIT NOT INCLUDEDJGDS0 81679 6 1 .35 100/500 4.51/cJGDS1 81680 6 1¼ .42 100/500 4.51/cJGDS2 81681 6 15/8 .51 100/500 5.31/cJGDS3 81682 6 2 .61 100/500 7.30/cJGDS4 81683 8 2½ .96 100 12.08/cJGDS5 81684 8 3 1.16 100 14.13/cJGDS6 81685 10 3½ 1.88 100 22.56/cJGDS7 81686 10 4 2.16 100 23.81/c500 PACK – 1 POWER BIT INCLUDED FREE IN 500 PACK SAVEJGDS1V 80417 6 1¼ 1.97 500 4.18/cJGDS2V 80418 6 15/8 2.40 500 4.96/cJGDS3V 80419 6 2 2.99 500 6.76/cJGDS4V 80420 8 2½ 4.68 500 10.86/cJGDS5V 80421 8 3 5.62 500 13.11/cGDS6V 12725 10 3½ 9.09 500 19.21/cGDS7V 12726 10 4 12.50 500 18.10/c1000 PACK – 1 POWER BIT INCLUDED FREE IN 1000 PACK SAVEJGDS1M 82730 6 1¼ 3.74 1000 40.57/mJGDS2M 82731 6 15/8 4.70 1000 47.91/mJGDS3M 82732 6 2 6.29 1000 65.55/mGDS4M 12733 8 2½ 10.42 1000 88.95/mGDS5M 12734 8 3 11.13 1000 113.45/mGDS6M 12735 10 3½ 18.18 1000 166.18/mGDS7M 12736 10 4 25.00 1000 175.25/mBULK PACKGDS25B 54065 6 15/8 25.50 5000 79.13/mGDS55B 54070 8 3 29.00 5000 104.92/mother sizes and quantities available by request

FLAT HEAD PHILLIPS COARSE THREAD DECK SCREWS

steel YelloW Zinc

Slotted

Phillips

SquareDrive

Hex

Phillips

69

A

SCREWS


TRIM HEAD SQUARE DRIVE FINE THREAD SCREW KIT


Slotted

Phillips

SquareDrive

Hex

PART# UPC# DIAMETER LENGTHWT.

EACH QTY. STD. PKG.

MSTR. CARTON SUGGESTED


THSK1 81794

6 1

1.60

100

1/25 30.19/ea kit6 15/8 756 2¼ 508 3 50

1 #1 x 1" Square Drive Insert Bitother sizes and quantities available by request

UPC# DIAMETER


UPC# DIAMETER6


UPC# DIAMETER

TRIM HEAD SQUARE DRIVE FINE THREAD SHARP POINT DRYWALL SCREWS


PART# UPC# DIAMETER LENGTH BIT SIZEWT. PER

PKG.STD. PKG./


LIST PRICE PERJTHS1 81775 6 1 #1 .50 100/500 6.44/cTHS1B 27857 6 1 #1 50.00 10000 62.47/mJTHS2 81778 6 15/8 #1 .72 100/500 6.55/cTHS2B 27858 6 15/8 #1 40.15 10000 63.54/mJTHS3 81781 6 2¼ #1 2.40 100/500 6.72/cTHS3B 27859 6 2¼ #1 31.57 6000 65.18/mJTHS4 81793 8 3 #2 3.00 100/500 7.56/cTHS4B 27860 8 3 #2 40.73 4000 73.33/m

Slotted

Phillips

SquareDrive

Hex

TRIM HEAD SQUARE DRIVE FINE THREAD SHARP POINT


BUGLE HEAD PHILLIPS FINE THREAD SELF-DRILLING/TAPPING DRYWALL SCREWS

steel Zinc

UGLEDRILLING/TAPPING DRYWALL SCREWS

BUGLEDRILLING/TAPPING DRYWALL SCREWS

BUGLEDRILLING/TAPPING DRYWALL SCREWS

PART# UPC# DIAMETER LENGTH BIT SIZE

WT. PER PKG.



100 PACKJSDS1C 80405 6 1 #1 .39 100/500 5.22/cJSDS3C 80406 6 1¼ #1 .43 100/500 6.14/c JSDS4C 80407 6 15/8 #1 .53 100/500 8.39/c JSDS5C 80408 6 17/8 #1 .61 100/500 10.07/c JSDS6C 83101 7 2 #1 .65 100/500 10.53/cJSDS7C 80409 8 25/8 #2 1.10 100 14.53/c JSDS9C 80410 8 3 #2 1.24 100 14.99/c 1000 PACK IN SQUARE PLASTIC JAR – POWER BIT INCLUDED FREE IN 1000 PACKSDS1M 27051 6 1 #1 3.45 1000 27.20/mSDS3M 27057 6 1¼ #1 4.04 1000 57.38/mSDS4M 27060 6 15/8 #1 5.25 1000 77.85/mSDS5M 27063 6 17/8 #1 7.00 1000 93.45/mSDS7M 27069 8 25/8 #2 10.49 1000 135.22/mSDS9M 27075 8 3 #2 12.07 1000 138.92/mBULK PACK IN BOX CARTON – 3 POWER BITS INCLUDED FREE IN BULK PACKSDS1B 27052 6 1 #1 39.00 10000 41.80/mSDS3B 27058 6 1¼ #1 36.80 8000 49.18/mSDS4B 27061 6 15/8 #1 29.00 5000 66.80/mSDS5B 27064 6 17/8 #1 28.00 4000 80.32/mSDS7B 27070 8 25/8 #2 23.00 2000 114.74/mSDS8B 27073 8 23/8 #2 29.33 3000 67.90/mSDS9B 27076 8 3 #2 18.45 1500 99.67/mother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex

A

SCREWS


BUGLE HEAD PHILLIPS FINE THREAD SELF-DRILLING/TAPPING

DRYWALL SCREWS STEEL BLACk PHOSPHATE

PART# UPC# DIAMETER LENGTH BIT SIZEWT. PER

PKG.STD. PKG./


LIST PRICE PERSDSBL1B 27851 6 1 #1 18.85 6000 265.55/mSDSBL2B 27852 6 15/8 #1 49.95 10000 531.00/m

Slotted

Phillips

SquareDrive

HexBUGLE HEAD PHILLIPS FINE THREAD

Phillips

WAFER HEAD PHILLIPS SHARP POINT SELF-PIERCING/TAPPING DRYWALL SCREWS

steel Zinc

Slotted

Phillips

SquareDrive

Hex WAFER HEAD PWAFER HEAD PWAFER HEAD PPhillips


PKG.STD. PKG./


TRADE LIST PRICE PERJWDW1C 80411 8 ½ .36 100/500 4.92/cJWDW1V 74401 8 ½ 1.57 500 4.75/cJWDW2C 80412 8 ¾ .43 100/500 5.40/cJWDW3C 80413 8 1 .59 100/500 6.35/cJWDW4C 81039 8 1¼ .68 100/500 6.99/c1000 PACK IN VISUAL PLASTIC JAR – POWER BIT INCLUDED FREE IN 1000 PACKWDW1M 27034 8 ½ 3.91 1000 45.88/mWDW2M 27091 8 ¾ 4.77 1000 50.85/mWDW3M 27092 8 1 5.59 1000 59.02/mWDW4M 27089 8 1¼ 6.22 1000 65.07/mBULK PACK IN BOX CARTON – 3 POWER BITS INCLUDED FREE IN BULK PACKWDW1B 62163 8 ½ 36.95 10000 39.34/mWDW2B 27093 8 ¾ 45.98 10000 43.44/mWDW3B 27094 8 1 59.00 10000 50.92/mWDW45B 54035 8 1¼ 34.00 5000 57.38/mWDW4B 27099 8 1¼ 69.85 10000 57.38/mother sizes and quantities available by request

NEED BULK SCREWS...Let Us Make Them For You!

A M E TA L L I C S A F F I L I AT E

P.O. Box 1600 • 231 Cross StreetBristol, CT 06011-1600

Tel: 800-984-8945 • Fax: 800-984-8946

MANUFACTURING CAPABILITIESDiameter range #2 thru 5/16” / 1.5mm thru 8mm • Length range 1/8” thru 3” / 3.5mm thru 75mm

Materials: Steel, Brass, Stainless, Aluminum, Bronze.

CAPABILITIES LIST PLANT SIZE: 100,000 SQUARE FEET

LOCATION: Bristol, Connecticut

EQUIPMENT: 27 Hi-Speed Cold Headers 8 Burr-Free Screw Slotters 3 Shank Slotters 2 Pointers 14 High Speed Thread Rollers

ADDITIONAL PLANT Modern shipping facility utilizing digital scale counting machines. INFO: in-house packaging facilities - boxing, sorting, baggings. All material boxed, palletized & labeled with your needs in mind for domestic or export shipping.

SECONDARY WORK: All plating & heat treating is done on the outside and certified for your guarantee.

INFORMATION our facility has new and upgraded technology to meet your SYSTEMS: customers specific requirements.

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

71

A

SCREWS


drill Pointself-Piercing

Slotted

Phillips

SquareDrive

Hex

PART# UPC# DIAMETER LENGTH POINTWT. PER

PKG.STD. PKG./


TRADE LIST PRICE PERDOMESTIC SELF-PIERCINGJPDW1CD 76831 6 7/16 sharp .32 100/500 13.79/cPDW1MD 77151 6 7/16 sharp 2.68 1000 116.88/mDOMESTIC DRILL POINTJPDS1CD 82695 6 7/16 drill .35 100/500 13.79/cPDS1MD 27130 6 7/16 drill 2.80 1000 116.88/m

PAN HEAD PHILLIPS SHARP POINT SELF-PIERCING FRAMING SCREWS


Slotted

Phillips

SquareDrive

Hex


PKG.STD. PKG./


TRADE LIST PRICE PERJPDW1C 80401 6 7/16 .32 100/500 4.33/c1000 PACK IN SQUARE PLASTIC JAR – POWER BIT INCLUDED FREE IN 1000 PACKPDW1M 27031 6 7/16 2.68 1000 40.16/mBULK PACK IN BOX CARTON – 3 POWER BITS INCLUDED FREE IN BULK PACKPDW1B 27032 6 7/16 39.75 15000 34.83/mother sizes and quantities available by request

PAN HEAD PHILLIPS FRAMING SCREWS

STEEL BLACk PHOSPHATEManufactured byavanti screw, inc.,A Metallics Affiliate

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

WAFER HEAD PHILLIPS SELF-DRILLING/ TAPPING DRYWALL SCREWS

steel Zinc

Slotted

Phillips

SquareDrive

Hex WAFER HEAD PWAFER HEAD PPhillips


PKG.STD. PKG./


TRADE LIST PRICE PERJWDS1C 80414 8 ½ .38 100/500 4.79/cJWDS1V 77194 8 ½ 1.66 500 4.66/cJWDS2C 80415 8 ¾ .56 100/500 5.25/cJWDS3C 82043 8 1 .62 100/500 10.23/cJWDS4C 80416 8 1¼ .70 100/500 7.45/cJWDS4V 40004 8 1¼ 3.50 500 7.22/cJWDS6C 82046 8 15/8 .87 100/500 42.43/c1000 PACK IN VISUAL PLASTIC JAR – POWER BIT INCLUDED FREE IN 1000 PACKWDS1M 27084 8 ½ 3.27 1000 43.86/mWDS2M 27095 8 ¾ 4.85 1000 48.80/mWDS3M 27040 8 1 7.90 1000 92.20/mWDS4M 27098 8 1¼ 6.73 1000 69.68/mBULK PACK IN BOX CARTON – 3 POWER BITS INCLUDED FREE IN BULK PACKWDS15B 27102 8 ½ 17.10 5000 38.11/mWDS1B 27085 8 ½ 33.25 10000 38.11/mWDS2B 27096 8 ¾ 55.00 10000 41.80/mWDS3B 27104 8 1 79.00 10000 77.86/mWDS45B 54042 8 1¼ 35.00 5000 59.83/mWDS4B 27097 8 1¼ 87.10 10000 59.84/mother sizes and quantities available by request

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PERJPDS1C 80403 6 7/16 .33 100/500 5.16/cJPDS1V 82689 6 7/16 1.32 500 5.01/c1000 PACK IN SQUARE PLASTIC JAR – POWER BIT INCLUDED FREE IN 1000 PACKPDS1M 27081 6 7/16 2.82 1000 47.73/mBULK PACK – 3 POWER BITS INCLUDED FREE IN BULK PACK PDS1B 27082 6 7/16 42.30 15000 54.64/mother sizes and quantities available by request

PAN HEAD PHILLIPS SELF-DRILLING/ TAPPING FRAMING SCREWS


Slotted

Phillips

SquareDrive

Hex

PANCAKE HEAD SELF-DRILLING/TAPPING SCREWS

410 STAInleSS


PKG.STD. PKG/


TRADE LIST PRICE PERJWDS20CSS 77195 10 ¾ .81 100 31.13/cWDS20MSS 27107 10 ¾ 8.10 1000 295.70/mWDS20BSS 27106 10 ¾ 81.00 10000 285.00/m

Slotted

Phillips

SquareDrive

Hex

BUGLE HEAD SQUARE DRIVE TYPE 17 COARSE THREAD

DECK SCREWSSTEEL zINC/ALL-WEATHER COATING

Slotted

Phillips

SquareDrive

Hex BUGLE HEAD TYPE 17 COARSE THREAD


PKG.STD. PKG./


TRADE LIST PRICE PER100 PACKJRDS1 81727 8 1¼ .50 100 9.49/cJRDS2 81728 8 15/8 .74 100 12.73/cJRDS3 81729 9 2 .81 100 17.25/cJRDS4 81737 9 2½ 1.23 100 27.91/cJRDS5 81738 9 3 1.41 100 25.87/cJRDS6 81739 10 4 2.50 100 40.02/c500 PACK – 1 POWER BIT INCLUDED FREE IN 500 PACKJRDS1V 81740 8 1¼ 2.28 500 8.84/cJRDS2V 81741 8 15/8 3.62 500 11.79/cJRDS3V 81742 9 2 4.94 500 16.04/cJRDS4V 81743 9 2½ 6.15 500 20.76/cRDS5V 12744 9 3 6.02 500 21.47/cRDS6V 12745 10 4 9.09 500 33.20/c1000 PACK – 1 POWER BIT INCLUDED FREE IN 1000 PACKJRDS1M 81750 8 1¼ 4.55 1000 66.83/mJRDS2M 81751 8 15/8 4.81 1000 89.30/mRDS3M 12752 9 2 6.29 1000 135.69/mRDS4M 12753 9 2½ 10.42 1000 175.42/mRDS5M 12754 9 3 13.95 1000 203.03/mRDS6M 12755 10 4 18.18 1000 314.30/mother sizes and quantities available by request

73

A

SCREWS



PKG.STD. PKG./


TRADE LIST PRICE PER100 PACKJCPD1 77007 8 15/8 .68 100 17.90/cJCPD2 77009 8 2 .89 100 24.15/cJCPD3 77010 9 2½ 1.18 100 29.39/cJCPD4 77025 9 3 1.39 100 29.39/cJCPD5 77040 10 3½ 1.86 100 70.03/c500 PACK – 1 POWER BIT INCLUDED FREE IN 500 PACKCPD1V 77057 8 15/8 3.14 500 13.29/cCPD2V 77059 8 2 3.56 500 19.30/cCPD3V 77074 9 2½ 5.79 500 26.69/cCPD4V 77075 9 3 6.84 500 30.27/cCPD5V 77090 10 3½ 9.32 500 63.95/c1000 PACK – 1 POWER BIT INCLUDED FREE IN 1000 PACKCPD1M 77107 8 15/8 6.27 1000 127.74/mCPD2M 77109 8 2 6.94 1000 185.34/mCPD3M 77124 9 2½ 11.50 1000 245.53/mCPD4M 77125 9 3 13.22 1000 289.49/mCPD5M 77140 10 3½ 18.64 1000 608.94/mother sizes and quantities available by request

Slotted

Phillips

SquareDrive

Hex BUGLE HEAD SQUARE/PHILLIPS TYPE 17 COARSE THREAD

DECK SCREWSsteel ceraMic coated

BUGLE HEAD 6 LOBE DRIVE TYPE 17

DECK SCREWS 18-8 STAINLESS


PKG.STD. PKG/


TRADE LIST PRICE PER100 PACKJSDL8 61064 8 1½ .85 100 19.13/cJSDL10 61065 10 2 1.05 100 31.50/cJSDL14 61069 14 3 3.22 100 101.50/c1000 PACKSDL8M 51041 8 1½ 8.50 1000 181.75/mSDL10M 51042 10 2 10.50 1000 299.25/mSDL14M 51043 14 3 32.20 1000 961.86/mBULK PACKSDL8B 51046 8 1½ 85.00 10000 172.13/mSDL10B 51047 10 2 105.00 10000 283.50/mSDL14B 51048 14 3 322.00 10000 911.25/mother sizes and quantities available by request

6 LOBE D


A

SCREWS



PKG.STD. PKG/


TRADE LIST PRICE PER100 PACKJSDSS8 60841 8 1½ .74 100 15.13/cJSDSS10 60843 10 2 1.17 100 23.00/cJSDSS14 60847 14 3 2.99 100 86.63/c1000 PACKSSDS8M 51051 8 1½ 7.50 1000 143.60/mSSDS10M 51052 10 2 11.80 1000 218.50/mSSDS14M 51033 14 3 29.90 1000 822.88/mBULK PACKSSDS8B 51056 8 1½ 18.80 2500 136.45/mSSDS10B 51057 10 2 25.00 2500 207.58/mSSDS14B 51058 14 3 74.80 2500 781.75/mother sizes and quantities available by request

BUGLE HEAD SQUARE DRIVE TYPE 17

DECK SCREWS 18-8 STAINLESS

SSlotted

Phillips

SquareDrive

Hex


PKG.STD. PKG/


TRADE LIST PRICE PER100 PACKJRSDS1 31970 8 1¼ .61 100 7.38/c JRSDS2 31971 8 15/8 .88 100 7.75/c JRSDS3 31972 8 1¾ 5.47 100 7.88/c JRSDS4 31973 8 2 .87 100 8.75/c JRSDS5 31974 9 2½ 1.20 100 9.12/c JRSDS6 31975 9 3 1.47 100 9.75/c JRSDS7 31976 10 3½ 1.70 100 18.13/c 500 PACKRSDS1V 31977 8 1¼ 3.05 500 6.63/c RSDS2V 31978 8 15/8 4.40 500 7.00/c RSDS3V 31979 8 1¾ 27.35 500 7.25/c RSDS4V 31980 8 2 4.35 500 7.88/c RSDS5V 31981 9 2½ 6.00 500 8.25/c RSDS6V 31982 9 3 7.35 500 8.75/c BULK PACKRSDS1B 31983 8 1¼ 15.74 2580 5.88/c RSDS2B 31984 8 15/8 17.60 2000 6.25/c RSDS3B 31985 8 1¾ 102.56 1875 6.50/c RSDS4B 31986 8 2 15.23 1750 7.00/c RSDS5B 31987 9 2½ 71.40 1190 7.38/c RSDS6B 31988 9 3 12.21 722 7.88/c RSDS7B 31989 9 3½ 7.48 440 14.75/c other sizes and quantities available by request

BUGLE HEAD STAR DRIVE TYPE 17 DECK SCREWS

steel YelloW Zinc

UPC#UPC# DIAMETERIAMETERIAMETERIAMETERIAMETERIAMETERIAMETER

B

75

A

SCREWS


OVAL HEAD SPANNER TAMPER-RESISTMACHINE SCREWS

18-8 STAINLESSSpanner Head

Star Head

Hex Head


PKG.STD. PKG./

MSTR. SLEEVETP800SOC 32775 6-32 ¼ .16 100TP801SOC 40432 6-32 5/16 .18 100TP803SOC 32777 6-32 3/8 .20 100TP804SOC 32778 6-32 ½ .23 100TP805SOC 32779 6-32 5/8 .34 100TP806SOC 32780 6-32 ¾ .31 100TP807SOC 32871 6-32 1 .38 100TP808SOC 32782 6-32 1¼ .46 100TP809SOC 32783 6-32 1½ .53 100TP810SOC 32784 6-32 2 .62 100TP811SOC 32790 8-32 ½ .35 100TP812SOC 32792 8-32 ¾ .47 100TP813SOC 32793 8-32 1 .58 100TP814SOC 32794 8-32 1¼ .69 100TP815SOC 32795 8-32 1½ .80 100TP816SOC 32796 8-32 2 1.05 100TP817SOC 32797 8-32 2½ 1.25 100TP818SOC 32802 10-24 3/8 .42 100TP819SOC 32803 10-24 ½ .49 100TP820SOC 32804 10-24 5/8 .57 100TP821SOC 32805 10-24 ¾ .64 100TP822SOC 32806 10-24 1 .78 100TP823SOC 32807 10-24 1¼ .93 100TP824SOC 32808 10-24 1½ 1.07 100TP825SOC 32809 10-24 2 1.36 100TP826SOC 32816 10-32 ½ .49 100TP827SOC 32817 10-32 5/8 .57 100TP828SOC 32818 10-32 ¾ .64 100TP829SOC 32819 10-32 1 .78 100TP830SOC 32820 10-32 1¼ .93 100TP831SOC 32821 10-32 1½ 1.07 100TP832SOC 32822 10-32 2 1.36 100TP833SOC 32832 ¼-20 1 1.50 100TP834SOC 32834 ¼-20 1½ 2.02 100TP835SOC 32835 ¼-20 2 2.54 100other sizes and quantities available by request See page 82 for Driver Stock Numbers. Because of the special nature of these products we do not provide a recommended trade list price.

CALLMETALLICs

FOR PRICInG


★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

A

SCREWS


SPANNER ONE-WAY

SIZEFLAT

STOCK#WT. PER

PKG.PAN

STOCK#WT. PER

PKG.

ROUND HEAD

STOCK#WT. PER

PKG.6-32 DRIVER SIZE #6 DRIVER SIZE #6¼ TP324SFC .15 – –3/8 TP326SFC .20 – –½ TP300SFC .23 TP300SPC .28 TP400SRC .235/8 TP327SFC .29 – –¾ TP301SFC .31 TP301SPC .31 TP401SRC .351 TP302SFC .38 TP302SPC .38 TP402SRC .421¼ TP303SFC .46 TP303SPC .46 –1½ TP304SFC .53 TP304SPC .53 TP404SRC .582 TP305SFC .68 TP305SPC .76 –3 TP701SFC .98 TP326SPC .99 –8-32 DRIVER SIZE #8 DRIVER SIZE #83/8 TP328SFC .30 – –½ TP306SFC .33 TP306SPC .35 TP406SRC .355/8 TP329SFC .41 TP328SPC .41 –¾ TP307SFC .47 TP307SPC .47 TP407SRC .471 TP308SFC .58 TP308SPC .58 TP408SRC .581¼ TP309SFC .69 TP309SPC .69 TP409SRC .691½ TP310SFC .80 TP310SPC .80 TP410SRC .802 TP311SFC 1.03 TP311SPC 1.03 –3 – TP327SPC 1.07 –10-24 DRIVER SIZE #10 DRIVER SIZE #103/8 TP330SFC .42 – –½ TP312SFC .49 TP312SPC .49 TP412SRC .505/8 TP331SFC .57 – –¾ TP313SFC .57 TP313SPC .64 TP413SRC .641 TP314SFC .78 TP314SPC .80 TP414SRC .781¼ TP315SFC .93 TP315SPC .93 TP415SRC .931½ TP316SFC 1.07 TP316SPC 1.07 TP416SRC 1.072 TP317SFC 1.36 TP317SPC 1.39 –10-32 DRIVER SIZE #10 DRIVER SIZE #103/8 TP333SFC .42 – –½ TP334SFC .49 TP332SPC .49 TP424SRC .505/8 TP335SFC .57 TP351SPC .57 –¾ TP336SFC .64 TP333SPC .64 TP425SRC .641 TP337SFC .78 TP334SPC .57 TP426SRC .781¼ TP338SFC .93 TP335SPC .93 –1½ TP339SFC 1.07 TP336SPC 1.07 TP427SRC 1.072 TP340SFC 1.36 TP337SPC 1.36 TP428SRC 1.372½ TP341SFC 1.35 TP338SPC 1.36 –12-24 DRIVER SIZE #101 TP124SFC 1.08 TP702SPC 1.08 –other sizes and quantities available by request See page 82 for Driver Stock Numbers. Because of the special nature of these products we do not provide a recommended trade list price.

CALLMETALLICs

FOR PRICInG

FLAT/PAN/ROUND HEAD SPANNER & ONE-WAY TAMPER-RESIST MACHINE SCREWS

18-8 STAINLESS

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

Spanner Head

Star Head

Hex Head

all items listed are special order itemsplease allow 1-2 weeks for delivery

sPECIALORdER

77

A

SCREWS


SPANNER ONE-WAY

SIZEFLAT

STOCK#WT. PER

PKG.PAN

STOCK#WT. PER

PKG.ROUND STOCK#

WT. PER PKG.

1/4-20 DRIVER SIZE #14 DRIVER SIZE #143/8 TP342SFC .85 – –½ TP318SFC .98 TP318SPC .98 TP418SRC .985/8 TP344SFC 1.11 – –¾ TP319SFC 1.24 TP319SPC 1.24 TP419SRC 1.241 TP346SFC 1.50 TP320SPC 1.72 TP420SRC 1.501¼ TP321SFC 1.76 TP321SPC 1.76 TP421SRC 1.761½ TP322SFC 2.02 TP322SPC 2.02 TP422SRC 2.022 TP323SFC 2.50 TP323SPC 2.54 TP423SRC 2.542½ TP350SFC 3.13 – –3 – TP352SPC 3.88 –1/4-28 DRIVER SIZE #14 DRIVER SIZE #14¾ – TP325SPC 2.40 –other sizes and quantities available by request See page 82 for Driver Stock Numbers. Because of the special nature of these products we do not provide a recommended trade list price.

CALLMETALLICs

FOR PRICInG

Spanner Head

Star Head

Hex Head

FLAT/PAN/ROUND HEAD SPANNER & ONE-WAY TAMPER-RESIST MACHINE SCREWS

18-8 STAINLESS

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★


sPECIALORdER

helpful hints from metallics

AMERICA’S SOURCE FOR PREMIER AND INNOVATIVE FASTENERS & ANCHORS

A

SCREWS


FLAT & BUTTON HEAD HEX & STAR PIN TAMPER-RESIST SHEET METAL SCREWS

18-8 STAINLESS

HEX PIN STAR PIN

SIZEFLAT

STOCK#WT. PER

PKG.BUTTON STOCK#

WT. PER PKG.

FLAT STOCK#

WT. PER PKG.

BUTTON STOCK#

WT. PER PKG.

6 DRIVER SIZE 1/8 DRIVER SIZE T10 DRIVER SIZE T103/8 TP520SFC .23 TP520SBC .23 – –½ TP500SFC .24 TP500SBC .25 TP600SFC .18 TP600SBC .205/8 TP521SFC .28 TP521SBC .28 – –¾ TP501SFC .31 TP501SBC .31 TP601SFC .25 TP601SBC .271 TP502SFC .30 TP502SBC .34 TP602SFC .32 TP602SBC .341½ TP503SFC .51 TP503SBC .55 TP603SFC .48 TP603SBC .508 DRIVER SIZE 5/32 DRIVER SIZE T15 DRIVER SIZE T153/8 – TP522SBC .25 – –½ TP504SFC .30 TP504SBC .34 TP604SFC .27 TP604SBC .295/8 TP522SFC .40 TP523SBC .40 – –¾ TP505SFC .40 TP505SBC .42 TP605SFC .39 TP605SBC .391 TP506SFC .68 TP506SBC .68 TP606SFC .48 TP606SBC .481¼ TP523SFC .67 – – –1½ TP507SFC .83 TP507SBC .83 TP607SFC .72 TP607SBC .672 TP524SFC .95 TP524SBC .95 – –10 DRIVER SIZE 5/32 DRIVER SIZE T20 DRIVER SIZE T25½ TP508SFC .41 TP508SBC .58 TP608SFC .60 TP608SBC .415/8 TP525SFC .53 TP525SBC .53 – –¾ TP509SFC .58 TP509SBC .52 TP609SFC .52 TP609SBC .521 TP510SFC .69 TP510SBC .65 TP610SFC .65 TP610SBC .651¼ TP511SFC 1.04 TP511SBC .65 TP611SFC .80 TP611SBC .801½ TP512SFC 1.20 TP512SBC .94 TP612SFC .83 TP612SBC .902 TP513SFC 1.20 TP513SBC 1.24 TP613SFC 1.06 TP613SBC 1.222½ TP526SFC 1.27 TP526SBC 1.52 – –12 DRIVER SIZE 5/32 DRIVER SIZE T20 DRIVER SIZE T25½ TP527SFC .64 TP527SBC .65 – –¾ TP528SFC .70 TP528SBC .72 – –1 TP529SFC .98 TP529SBC 1.00 – –1¼ TP530SFC 1.13 – – –1½ TP531SFC 1.30 TP530SBC 1.33 – –14 DRIVER SIZE 5/32 DRIVER SIZE T30 DRIVER SIZE T27½ TP514SFC 1.15 TP514SBC 1.15 TP614SFC 1.30 TP614SBC 1.305/8 TP532SFC .89 TP531SBC .90 – –¾ TP515SFC 1.36 TP515SBC 1.36 TP615SFC 1.40 TP615SBC 1.401 TP516SFC 1.60 TP516SBC 1.60 TP616SFC 1.60 TP616SBC 1.601¼ TP517SFC 1.87 TP517SBC 1.87 TP617SFC 1.90 TP617SBC 1.901½ TP518SFC 2.00 TP518SBC 2.00 TP618SFC 2.12 TP618SBC 2.122 TP519SFC 2.62 TP519SBC 2.62 – TP619SBC 2.12other sizes and quantities available by request See page 82 for Driver Stock Numbers. Because of the special nature of these products we do not provide a recommended trade list price.

Spanner Head

Star Head

Hex Head

Spanner Head

Star Head

Hex Head

CALLMETALLICs

FOR PRICInG


sPECIALORdER

79

A

SCREWS


FLAT & BUTTON HEAD HEX & STAR PIN TAMPER-RESIST MACHINE SCREWS

18-8 STAINLESS


HEX PIN STAR PIN

SIZEFLAT

STOCK#WT. PER

PKG.BUTTON STOCK#

WT. PER PKG.

FLAT STOCK#

WT. PER PKG.

BUTTON STOCK#

WT. PER PKG.

4-40 DRIVER SIZE 1/8 DRIVER SIZE T10¼ – – – TP122SBC .096-32 DRIVER SIZE 1/8 DRIVER SIZE T10¼ – TP123SBC .16 TP222SFC .18 TP223SBC .163/8 TP122SFC .18 TP124SBC .20 TP199SFC .20 –½ TP100SFC .28 TP100SBC .25 TP200SFC .23 TP200SBC .23½ TP100SFCSI .28 – – –¾ TP101SFC .35 TP101SBC .35 TP201SFC .31 TP201SBC .311 TP102SFC .40 TP102SBC .41 TP202SFC .41 TP202SBC .421 TP102SFCSI .40 – – –1¼ TP103SFC .49 TP103SBC .50 TP203SFC .44 TP203SBC .431½ TP104SFC .59 TP104SBC .57 TP204SFC .56 TP204SBC .502 TP332SFC .72 – – –8-32 DRIVER SIZE 5/32 DRIVER SIZE T25¼ – – TP224SFC .22 TP225SBC .243/8 TP125SFC .27 TP125SBC .34 TP225SFC .30 TP226SBC .30½ TP105SFC .31 TP105SBC .35 TP205SFC .35 TP205SBC .35¾ TP106SFC .41 TP106SBC .47 TP206SFC .48 TP206SBC .471 TP107SFC .52 TP107SBC .58 TP207SFC .58 TP207SBC .581¼ TP108SFC .72 TP108SBC .72 TP208SFC .61 TP208SBC .671½ TP109SFC .84 TP109SBC .80 TP209SFC .84 TP209SBC .782 TP110SFC 1.10 TP110SBC 1.11 TP210SFC 1.10 TP210SBC 1.1210-24 DRIVER SIZE 5/32 DRIVER SIZE T253/8 TP126SFC .37 – TP226SFC .37 –½ TP111SFC .44 TP111SBC .50 TP227SFC .44 TP211SBC .49

– – TP228SFC .57 –¾ TP112SFC .58 TP112SBC .64 TP212SFC .64 TP212SBC .641 TP113SFC .78 TP113SBC .78 TP213SFC .76 TP213SBC .781¼ TP114SFC .87 TP114SBC .95 TP214SFC .93 TP214SBC .931½ TP115SFC .98 TP115SBC 1.07 TP215SFC 1.10 TP215SBC 1.1110-32 DRIVER SIZE 5/32 DRIVER SIZE T253/8 TP127SFC .37 – TP229SFC .42 TP227SBC .42½ TP128SFC .44 – TP623SFC .49 TP228SBC .495/8 – – – TP229SBC .54¾ TP129SFC .58 – TP231SFC .64 TP230SBC .641 TP130SFC .76 TP126SBC .78 TP232SFC .78 TP231SBC .781¼ – – TP233SFC .93 TP232SBC .931½ TP131SFC 1.08 – TP707SFC 1.04 TP233SBC 1.055/16 -18 DRIVER SIZE 5/32 DRIVER SIZE T3/8 – TP127SBC 1.27 – –½ TP133SFC 1.48 TP128SBC 1.88 – –¾ TP134SFC 1.96 TP129SBC 2.10 – –1 TP135SFC 2.34 TP130SBC 2.28 – –1¼ TP136SFC 2.72 TP131SBC 3.82 – –1½ TP137SFC 3.09 TP132SBC 3.15 – –2 TP138SFC 4.06 TP133SBC 4.00 – –other sizes and quantities available by request See page 82 for Driver Stock Numbers. Because of the special nature of these products we do not provide a recommended trade list price.

Spanner Head

Star Head

Hex Head

Spanner Head

Star Head

Hex Head

CALLMETALLICs

FOR PRICInG

sPECIALORdER

A

SCREWS


FLAT & BUTTON HEAD HEX & STAR PIN TAMPER-RESIST MACHINE SCREWS

18-8 STAINLESS


HEX PIN STAR PIN

SIZEFLAT

STOCK#WT. PER

PKG.BUTTON STOCK#

WT. PER PKG.

FLAT STOCK#

WT. PER PKG.

BUTTON STOCK#

WT. PER PKG.

1/4-20 DRIVER SIZE 5/32 DRIVER SIZE T303/8 – – TP235SFC .78 TP234SBC .79½ TP116SFC .88 TP116SBC .98 TP216SFC .98 TP216SBC .985/8 – – TP236SFC 1.04 –¾ TP117SFC 1.06 TP117SBC 1.24 TP217SFC 1.24 TP217SBC 1.241 TP118SFC 1.35 TP118SBC 1.50 TP218SFC 1.50 TP218SBC 1.501¼ TP119SFC 1.58 TP119SBC 1.76 TP219SFC 1.76 TP219SBC 1.761½ TP120SFC 1.82 TP120SBC 2.02 TP220SFC 2.02 TP220SBC 2.022 TP121SFC 2.46 TP121SBC 2.54 TP221SFC 2.38 TP221SBC 2.383/8-16 DRIVER SIZE 5/32 DRIVER SIZE T30½ TP139SFC 2.39 TP134SBC 2.34 – –¾ TP140SFC 3.10 TP135SBC 3.08 – TP222SBC 3.101 TP141SFC 3.66 TP136SBC 3.67 – –1¼ TP142SFC 4.21 TP137SBC 4.26 – –1½ TP143SFC 4.76 TP138SBC 4.86 – –2 TP144SFC 5.85 TP139SBC 6.10 – –1/2-13 DRIVER SIZE 5/32 DRIVER SIZE T301 – TP140SBC 6.90 – –1½ – TP141SBC 9.00 – –2 – TP142SBC 12.00 – –2½ – TP143SBC 13.67 – –3 – TP144SBC 16.10 – –3½ – TP145SBC 18.70 – –other sizes and quantities available by request See page 82 for Driver Stock Numbers. Because of the special nature of these products we do not provide a recommended trade list price.

Spanner Head

Star Head

Hex Head

Spanner Head

Star Head

Hex Head

CALLMETALLICs

FOR PRICInG

sPECIALORdER


★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

81

A

SCREWS


ONE-WAY

SIZE ROUND STOCK# WT. PER PKG.6 DRIVER SIZE #6¼ TP700SRC .17½ TP701SRC .20¾ TP702SRC .271 TP703SRC .348 DRIVER SIZE #8½ TP704SRC .29¾ TP705SRC .391 TP706SRC .481¼ TP707SRC .591½ TP708SRC .672 TP709SRC .7210 DRIVER SIZE#10½ TP710SRC .41¾ TP711SRC .521 TP712SRC .651¼ TP713SRC .801½ TP714SRC .902 TP715SRC 1.1314 DRIVER SIZE #14½ TP716SRC .84¾ TP717SRC 1.071 TP718SRC 1.251½ TP719SRC 1.67other sizes and quantities available by request See page 82 for Driver Stock Numbers. Because of the special nature of these products we do not provide a recommended trade list price

CALLMETALLICs

FOR PRICInG

ROUND HEAD ONE-WAY TAMPER-RESIST SHEET METAL SCREWS

18-8 STAINLESS

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★


sPECIALORdER

Helpful Hints From Metallics:

GOT FASTENERS?Did You forget to ask…

A

SCREWS


POWER INSERT BITS PART# UPC# SIZEWT. PER

PKG.SUGGESTED


SPANNER BIT

00SP6B 25027 #6 .01 6.31/ea00SP8B 10195 #8 .01 6.31/ea00SP10B 10196 #10 .01 6.31/ea00SP12B 10194 #12 .01 6.31/ea00SP14B 10197 #14 .01 6.31/ea

STAR PIN(TORX)

00TP06 25035 T6 .01 6.31/ea00TP08 25036 T8 .01 6.31/ea00TP09 41199 T9 .01 6.31/ea00TP10 41200 T10 .01 6.31/ea00TP15 41210 T15 .01 6.31/ea00TP20 41215 T20 .01 6.31/ea00TP25 41220 T25 .01 6.31/ea00TP27 41222 T27 .01 6.31/ea00TP30 41230 T30 .01 6.31/ea00TP40 25037 T40 .01 6.31/ea

HEX PIN00HP18B 41255 1/8 .01 6.31/ea00HP32B 41260 5/32 .01 6.31/eaother sizes and quantities available by request

TAMPER-RESIST BITS

ONE-WAY REMOVAL TOOLOne-way machine screw installation and removal• Install with a standard blade screwdriver• Remove only with a one-Way removal toolUse with TP400 Series screws

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

Use with TP400 Series screwsUse with TP400 Series screws

PART# UPC# SIZE WT. EACHSTD. PKG./


TRADE LIST PRICE PERRT1W 41270 6-8 .23 1 67.36/eaRT2W 41271 10-12 .30 1 67.36/eaRT3W 41272 ¼ .38 1 67.36/eaother sizes and quantities available by request

Spanner Head

Star Head

Hex Head

Spanner Head

Star Head

Hex Head

MAGNETIC HAND DRIVERBIT STORAGE IN HANDLE

(order bits separately)

PART# UPC# SIZE/TYPE WT.STD. PKG./


TRADE LIST PRICE PERHDT14 41265 ¼ Hex .24 1 22.77/ea

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

UPC# SIZE/TYPE¼ Hex

Spanner Head

Star Head

Hex Head

Spanner Head

Star Head

Hex Head

83

A

SCREWS


PART# UPC#WT. PER

PKG.STD. PKG./


TRADE LIST PRICE PEREVBK100 26720 2 1 113.38/ea kit

ISOMAX®Assortment of Insert Bits

100 Pc. Security & Non Security Bit kit

isomax® is a registered trademark

Kit Contains the Following Bits

TIP TYPES TIP SIZES LENGTH

socket adapters ¼ 1¼ 2

female socket adapters ¼ 1Y-cup Hook Installer/Remover fits all 1

Bit Holder ¼ Hex 2-3/8 Phillips®

(2) each#0 1#1 1#2 1#3 1

octo-driv®

fits Pozi-Drive® - (2) each#0 1#1 1#2 1#3 1

slotted 2 12.5 13 14 1

4.5 15 16 17 18 1


tee*star® T8 1T9 1

T10 1T15 1T20 1T25 1T27 1T30 1T40 1

security tee*star®

(fits Security Torx®)T8 1T9 1

T10 1T15 1T20 1T25 1T27 1T30 1T40 1

Hex key (fits Allen®)

2mm 12.5mm 13mm 14mm 15mm 1

5.5mm 16mm 17mm 18mm 1

1/16 15/64 13/32 17/64 11/8 15/32 13/16 17/32 1¼ 1

5/16 1


security Hex (fits Security Allen®)

2mm 12.5mm 13mm 14mm 15mm 16mm 1

5/64 13/32 17/64 11/8 19/64 15/32 1

spanner #4 1#6 1#8 1

#10 1triple-Y®

(fits Tri-Wing®)1 12 13 14 1

tee-cross®

(fits Torq-Set®)6 18 1

10 1square recess R0 1

R1 1R2 1R3 1

spline #4 1#5 1#6 1

clutch #1 1#2 1#3 1

socket adapters ¼ 1

LENGTHTIP TYPES TIP SIZES LENGTH

socket adapters ¼ 1

30-PIECE TAMPER-RESIST KITPART# UPC#

NO. OF PIECES WT.


TPK30 41280 30 1.04 133.48/ea kitINCLUDES BIT/PT. SIZE

driver ¼ (magnetic w/storage handle)TORx® Bits T8, T9, T10, T15, T20, T25, T27, T30, T40Hex Pin Bits 3/32; 1/8; 9/64; /32; 3/16; 7/32; ¼; 5/16 Spanner Bits 6; 8; 10tri-WinG® Bits 1; 2; 3PoZidriV® Bit 1; 2; 3socket adapter 1 Bit Holder 1

A

SCREWS


PART# UPC# DIAMETER LENGTH DESCRIPTIONWT. PER

PKG.STD. PKG./

MSTR SLEEVESUGGESTED TRADE

LIST PRICE PER

SWPK1 20360

6 - 32 ½ slotted oval Head White Painted screw

.98 50 31.51/ea kit

6 - 32 ½ slotted oval Head ivory Painted screw6 - 32 ½ slotted oval Head almond Painted screw6 - 32 ¾ slotted flat Head Machine screw6 - 32 1 slotted flat Head Machine screw

- - Quick Fix GB® spacers

SUPER WALL PLATE SCREW KITA complete wall plate kit to make insulation easy and safer.

Each kit contains:• 50 Wall plate screws in white, ivory and almond.• 50 screws to secure electrical devive to electrical box.• 50 Quick Fix GB® spacers to shim electrical device so wall plate

is flush to wall.


PKGSTD. PKG./


TRADE LIST PRICETSK8 10494 300 pcs - #8 Pan Head Combo (phillips/slotted) 1.66 1/25 19.21/ea kit

100 - ½ , 75 - ¾ , 50 - 1 , 30 - 1¼ ,25 - 1½ , 20 - 2 1 - #2 2 Phillips Power Bit - 100P2B

TSK10 10495 245 pcs - #10 Pan Head Combo (phillips/slotted) 1.84 1/25 20.49/ea kit75 - ½ , 50 - ¾ , 45 - 1 , 30 - 1¼ ,25 - 1½ , 20 - 2 1 - #2 2 Phillips Power Bit - 100P2B

DSK8 10496 300 pcs - #8 ª Hex Slotted Washer Head 1.69 1/25 22.51/ea kit100 - ½ , 75 - ¾ , 50 - 1 , 30 - 1¼ ,25 - 1½ , 20 - 2 1 - ¼ x 15/8 Hex Nut Driver - MT208B

DSK10 10497 245 pcs - #10 5/16 Hex Slotted Washer Head 1.59 1/25 24.18/ea kit75 - ½ , 50 - ¾ , 45 - 1 , 30 - 1¼ ,25 - 1½ , 20 - 2 1 - 5/16 x 15/8 Hex nut driver - MT210B

DSK12 10473 245 pcs - #12 5/16 Hex Slotted Washer Head 2.47 1/25 27.25/ea kit75 - ½ , 50 - ¾ , 45 - 1 , 30 - 1¼ ,25 - 1½ , 20 - 2 1 - 5/16 x 15/8 Hex nut driver - MT210B

TSSK8 10498 300 pcs - #8 Pan Head Square Drive Recess 1.50 1/25 23.79/ea kit100 - ½ , 75 - ¾ , 50 - 1 , 30 - 1¼ ,25 - 1½ , 20 - 2 1 - #2 2 Square Drive Power Bit - 100R2B

TTSK10 10499 245 pcs - #10 Pan Head Tri-Drive (square/phillips/slotted)75 - ½ , 50 - ¾ , 45 - 1 , 30 - 1¼ ,25 - 1½ , 20 - 21 - #2 2 Square Drive Power Bit - 100R2B

1.75 1/25 26.35/ea kit


PAN/HEX HEAD SHEET METAL SCREW KITS

steel ZincPower bits and drivers included

Manufactured byavanti screw, inc.,A Metallics AffiliatescreWs

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★★ ★ ★ ★ ★

★ ★ ★ ★ ★ ★

OnLYMETALLICs!

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

PART#

-

PART#10494 300 pcs - #8 Pan Head Combo (phillips/slotted)

PART# UPC# ITEM

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

85

A

SCREWS


BUGLE HEAD PHILLIPS COARSE THREAD DECK SCREW KIT

steel YelloW Zinc

PART# UPC#WT. PER

PKG.STD. PKG./


TRADE LIST PRICEGDSK1 12704 1.99 1/25 20.13/ea kitother sizes and quantities available by request

• 80 - 6 x 1• 70 - 6 x 1¼

• 60 - 6 x 15/8 • 40 - 6 x 2

• 30 - 8 x 2½ • 20 - 8 x 3

• 1 - 6 Compartment Box

Kit Includes: 300 screws

COARSE THREAD DECK SCREW KIT

Slotted

Phillips

SquareDrive

Hex

SELF DRILLING SCREW KITSsteel Zinc

Power bits and setters included


PKGSTD. PKG./


TRADE LIST PRICETEKDK1 10503 305 pcs - #8 & #10 Hex Washer Head Screws 1.69 1/25 35.70/ea kit

#8 WITH ¼ HEx HEAD 100 - ½ , 50 - ¾ -, 40 - 1 , #10 WITH 5/16 HEx HEAD 50 - ½ , 35 - ¾ , 30 - 1 1 - ¼ Nut Setter - MT208B 1 - 5/16 Nut Setter - MT210B

TEKSK1 10504 380 pcs - #8 & #10 Square Drive Pan Head Screws 1.18 1/25 27.45/ea kit100 - #8 ½ , 60 - #8 ¾ , 50 - #8 1 , 80 - #10 ½ , 50 - #10 ¾ , 40 - #10 1 1 - #2 2 Square Drive Power Bit - 100R2B

TEKPK1 10505 380 pcs - #8 & #10 Pan Head Phillips Screws 1.96 1/25 27.45/ea kit100 - #8 ½ , 60 - #8 ¾ , 50 - #8 1 , 80 - #10 ½ , 50 - #10 ¾ , 40 - #10 1 1 - #2 2 Phillips Power Bit - 100P2B


Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

HexSlotted

Phillips

SquareDrive

Hex

DESCRIPTION OF CONTENTSPART# UPC# DESCRIPTION OF CONTENTS10503 305 pcs - #8 & #10 Hex Washer Head Screws

¼ H



PKGSTD. PKG./


TRADE LIST PRICERMK632 10894 370 pcs - 6-32 Round Head Combo (Phillips/slotted) 1.92 1/25 35.70/ea kit

100 - ¾ , 75 - 1 , 75 - 1¼ , 50 - 1½ , 40 - 2 , 30 - 3

RMK832 10264 370 pcs - 8-32 Round Head Combo (Phillips/slotted) 2.28 1/25 27.45/ea kit100 - ½ , 75 - ¾ , 75 - 1 , 50 - 1¼ , 40 - 1½ , 30 - 2

RMK1032 10501 245 pcs - 10-32 Round Head Combo (Phillips/slotted) 2.18 1/25 27.45/ea kit75 - ½ , 50 - ¾ , 40 - 1 , 30 - 1¼ , 25 - 1½ , 25 - 2

RMK1420 10502 124 pcs - 1/4-20 Round Head Combo (Phillips/slotted) 2.02 1/25 27.45/ea kit35 - ½ , 30 - ¾ , 20 - 1 , 15 - 1¼ , 12 - 1½ , 12 - 2


ROUND HEADMACHINE SCREW KITS

steel Zinc

Slotted

Phillips

SquareDrive

Hex

request

UPC# DESCRIPTION OF CONTENTS

#2 2 Phillips Power Bit#2 2 Phillips Power Bit#2 2 Phillips Power Bit#2 2 Phillips Power Bitand quantities available by request

DESCRIPTION OF CONTENTS370 pcs - 6-32 Round Head Combo

quantities request

UPC# DESCRIPTION OF CONTENTS

Slotted

Phillips

SquareDrive

Hex

A

SCREWS




PKGSTD. PKG./


TRADE LIST PRICERSBK1 10365 6-32 Round Head Combo

(Phillips and Slotted) MS1.23 1/25 36.11/ea kit

50 - ½ , 30 - ¾ , 20 - 1 , 20- 1¼ ,15 - 1½ , 15 - 2 150 - 6-32 Hex Nuts total pieces in kit

500100 #6 SAE Washers100 #6 Lock Washers

RSBK2 10366 8-32 Round Head Combo (Phillips and Slotted) MS

1.64 1/25 40.41/ea kit

50 - ½ , 30 - ¾ , 20 - 1 , 20 - 1¼ ,15 - 1½ , 15 - 2 150 - 8-32 Hex Nuts total pieces in kit


RSBK3 10367 10-32 Round Head Combo (Phillips and Slotted) MS

2.14 1/25 42.51/ea kit

50 - ½ , 30 - ¾ , 20 - 1 , 20- 1¼ ,15 - 1½ , 15 - 2 150 - 10-32 Hex Nuts total pieces in kit


RSBK4 10368 1/4-20 Round Head Combo (Phillips and Slotted) MS

3.25 1/25 35.18/ea kit

35 - ½ , 30 - ¾ , 20 - 1 , 15 - 1¼ ,12 - 1½ , 12 - 2 100 - ¼ -20 Hex Nuts total pieces in kit

32450 ¼ SAE Washers50 ¼ Lock Washers

RSBK212 13070 Round Head Combo (Phillips and Slotted) MS100 - 6-32 x 2½100 - 8-32100 - 10-24100 - 10-32

100 - 6-32 Hex Nuts100 - 8-32100 - 10-24100 - 10-32

16.50 1

total pieces in kit 1600

169.75/ea kit


STOVE BOLT KITSsteel Zinc

PART# DESCRIPTION OF CONTENTS

SCREWS

PART#10365 6-32 Round Head Combo

(Phillips and Slotted) MS


Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex

Slotted

Phillips

SquareDrive

Hex 100 - #6 Flat SAE Washers100 - #8200 - #10

100 - #6 Split Lock Washers100 - #8200 - #10

87

A

SCREWS


A 11 lb. Assortment of Screws, Nuts, Bolts, Washers, Nails, Anchors, etc.

no set amount of any one item.

find the GOLD screw and receive a free Gift from your distributor!

TREASURE CHESTend of The run

Assortment of Fasteners

SINGLE SIDED AND DOUBLE SIDEDORGANIZERS

organizer boxes have clear lids to see product inside,and dividers have dovetails to lock in place

• ORG1 is single sided and offers 22 storage compartments. Includes 18 dovetail dividers allowing you to customize the size of the compartments.

• ORG2 is double sided and offers 32 storage compartments. Includes 24 dovetail dividers.

PART# UPC# SIZE COMPARTMENTSWT. PER

PKGSTD. PKG./


TRADE LIST PRICE PERORG1 34501 13 L x 10 W x 2 H 22 .97 1 33.88/eaORG2 34502 13 L x 10 W x 3 H 32 1.56 1 50.03/eaother sizes and quantities available by request

PART#UPC NO.

WT. PER PKG

SUGGESTED TRADE LIST PRICE

FA1 11500 11.35 34.27/eaother sizes and quantities available by request

PACKED WITH PRIDE as a part of our Quality Program, each shipment and each single carton leaving our facilities has a label affixed to it, indicating the person who packed the order.

HARD BODY PACKING When you, the distributor, compare price and performance to other fastener suppliers, please compare our Hard Body Packing to the way they ship products.

We do it the right way–the quality way–the Metallics way.

Documents

SCREWS - MetallicsROUND TRI-DRIVE MACHINE SCREWS steel Zinc Introduced nationally by Metallics in 1994 An IndusTRY FIRsT! A free square drive bit with each jar of Tri-Drive Machine