SCIENTIFIC CALCULATOR OPERATION GUIDE...(FIX mode TAB = 3) (SCI mode) (ENG mode) (normal mode) The distance from the earth to the sun is approx. 150,000,000 (1.5 x 108) km. Values

SCIENTIFICCALCULATOR

OPERATION GUIDE

SCIENTIFICCALCULATOR

OPERATION GUIDE

● If you are accessing from Europe, please visit: http://www.sharp-calculators.com/ You can get the Guide book of the latest model.● If you are accessing from U.S.A., please visit: https://sharpcalculators.com/ You can get the Guide book of the latest model.

http://www.sharp-calculators.com/https://sharpcalculators.com/

1 2

Arc trigonometric functions 43

CONTENTS

HOW TO OPERATERead Before Using

Functions and Key OperationsON/OFF, entry correction keys 7Data entry keys 8Random key 9Modify key 10Basic arithmetic keys, parentheses 11Percent 12Inverse, square, cube, xth power of y, square root, cube root, xth root of y 13

Key layout 3Reset switch/Display pattern 4Display format and decimal setting function 4-5Exponent display 5Angular unit 6

STATISTICS FUNCTIONSData input and correction 64“ANS” keys for 1-variable statistics 65-69Data correction 70-72“ANS” keys for 2-variable statistics 73

10 to the power of x, common logarithm, logarithm of x to base a 17

Binary, pental, octal, decimal, and hexadecimal operations (N-base) 49

e to the power of x, natural logarithm 21Exponential, logarithmic 18-20

Permutations, combinations 24-26Matrix calculation 27-31

Hyperbolic 44-46

Differentiation calculation 50-51Integration calculation 52-54Polynomial equation 55-58Simultaneous calculation 59-61Complex calculation 62-63

Power and radical root 14-16

Factorials 22-23

Time calculation 32Fractional calculations 33Memory calculations 34Last answer memory 35User-defined functions 36Absolute value 37Trigonometric functions 38-42

Hyperbolic functions 47Coordinate conversion 48

~

~

B X

xdxCB

d�dx x

�

3

How to Operate

Mode key

1. KEY LAYOUT

≈Read Before Using≈This operation guide has been written based on the EL-W531X, EL-W535X, EL-W531XH, EL-W531XG, EL-W531, EL-W506X, EL-W516X and EL-W506 models. Some functions described here are not featured on other models. In addition, key operations and symbols on the display may differ according to the model.

(SD): Single variable statistic calculation

(LINE): Linear regression calculation

(QUAD): Quadratic regression calculation

(E_EXP): Eular Exponential regression calculation

(LOG): Logarithmic regression calculation

(POWER): Power regression calculation

(INV): Inverse regression calculation

(EXP): Exponential regression calculation

2nd function, ALPHA keysPressing these keys will enable the functions written in orange (2nd F) or green (ALPHA) above the calculator buttons.

This calculator can operate in three different modes as follows.

[Normal mode] •Mode = 0; normal mode for performing normal arithmetic and function calculations.

ON/C, OFF keyDirect function

2nd functionWritten in orange above the ON/C key

(EL-W506X/EL-W516X/EL-W506 only)

[STAT mode] •Mode = 1; mode for performing 1- or 2-variable statistical calculations. To select the statistical sub-mode, press the corresponding number key after .

[Drill mode] •Mode = 2; mode for performing drill calculations. To select the drill sub-mode, press the corresponding number key after .

(MATH): Math drill

(TABLE): Multiplication table drill

4

(specifies normal mode)

3. DISPLAY PATTERN

Initial display

The actual display does not appear like this. This illustration is for explanatory purposes only.

Note: The calculator has two settings for displaying a floating point number: NORM1 (default setting) and NORM2. In each display setting, a number is automatically displayed in scientific notation outside a preset range:• NORM1: 0.000000001

5

5. EXPONENT DISPLAY

0.32 191.6

(FIX mode TAB = 3)

(SCI mode)

(ENG mode)

(normal mode)

The distance from the earth to the sun is approx. 150,000,000 (1.5 x 108) km. Values such as this with many zeros are often used in scientific calculations, but entering the zeros one by one is a great deal of work and it’s easy to make mistakes. In such cases, the numerical values are divided into mantissa and exponent portions, displayed and calculated.

What is the number of electrons flowing in a conductor whenthe electrical charge across a given cross-section is 0.32 coulombs. (The charge on a single electron = 1.6 x 10-19 coulombs).

6

6. ANGULAR UNIT

Operation Display

90

Angular values are converted from DEG to RAD to GRAD with each push of the DRGkey. This function is used when doing calculations related to trigonometric functions orcoordinate geometry conversions.

Degrees (DEG is shown at the top of the display)A commonly used unit of measure for angles. The angular measure of a circle is expressed as 360°.

Radians (RAD is shown at the top of the display)Radians are different from degrees and express angles based on the circumference of a circle. 180° is equivalent to π radians. Therefore, the angular mea-sure of a circle is 2π radians.

Grads (GRAD is shown at the top of the display)Grads are a unit of angular measure used in Europe, particularly in France. An angle of 90 degrees is equivalent to 100 grads.

The relationships between the three typesof angular units can be expressed as right: π

�90° (DEG) =π/2 (RAD) =100 (GRAD) =

Check to confirm 90 degrees equalling π/2 radiansequalling 100 grads. (π=3.14159...)

6

6. ANGULAR UNIT

Operation Display

90

Angular values are converted from DEG to RAD to GRAD with each push of the DRGkey. This function is used when doing calculations related to trigonometric functions orcoordinate geometry conversions.

Degrees (DEG is shown at the top of the display)A commonly used unit of measure for angles. The angular measure of a circle is expressed as 360°.

Radians (RAD is shown at the top of the display)Radians are different from degrees and express angles based on the circumference of a circle. 180° is equivalent to π radians. Therefore, the angular mea-sure of a circle is 2π radians.

Grads (GRAD is shown at the top of the display)Grads are a unit of angular measure used in Europe, particularly in France. An angle of 90 degrees is equivalent to 100 grads.

The relationships between the three typesof angular units can be expressed as right: π

�90° (DEG) =π/2 (RAD) =100 (GRAD) =

Check to confirm 90 degrees equalling π/2 radiansequalling 100 grads. (π=3.14159...)

7

Turns the calculator on or clears the data. It also clears the contents of the calculator display and voids any calculator command; however, coefficients in 3-variable linear equations and statistics, as well as values stored in the independent memory in normal mode, are not erased.

Clears all internal values, including the last answer (ANS) and statistics. Values stored in memory in normal mode are not erased.

These arrow keys are useful for Multi-Line playback, which lets you scroll through calculation steps one by one.

Turns the calculator off.

These keys are useful for editing equations. The key moves the cursor to the left, and the key moves the cursor to the right. The key deletes the symbol/number at the left of the cursor, and the key deletes the symbol/number at the cursor.

≈Functions and Key Operations≈

ON/OFF, EntryCorrection Keys

8

Data Entry Keys

0 to 9

Operation

21.496 8

Display

Decimal point key. Enters a decimal point.

Numeric keys for entering data values.

Pressing this key switches to scientific notation data entry.

Provided the earth is moving around the sun in a circular orbit,how many kilometers will it travel in a year?

Circumference equals diameter x π; therefore,1.496 x 108 x 2 x π

* The average distance between the earth and the sun being1.496 x 108 km.

Pressing π automatically enters the value for π (3.14159...).The constant π, used frequently in function calculations, is the ratio of thecircumference of a circle to its diameter

Enters the minus symbol.The subtraction key is not used for entering negative numbers.

( EL-W506X/EL-W516X/EL-W506 only)

9

Random Key

0. *** (A random number is generated.)

[Random Dice]To simulate a die-rolling, a random integer between 1 and 6 can be generated by pressing . To generate the next random dice number, press .[Random Coin]To simulate a coin flip, 0 (heads) or 1 (tails) can be randomly generated by pressing . To generate the next random coin number, press .[Random Integer]An integer between 0 and 99 can be generated randomly by pressing . To generate the next random integer, press .

Generates random numbers.Random numbers are three-decimal-place values between 0.000 and 0.999. Using thisfunction enables the user to obtain unbiased sampling data derived from randomvalues generated by the calculator. (Using line mode is preferable since in W-View mode, the numbers are generated by fractions.)

APPLICATIONS:Building sample sets for statistics or research.

10

5.0

0.6

0.6

5.4

5 9

9

5 9

9

Modify KeyFunction to round calculation results.Even after setting the number of decimal places on the display, the calculator per-forms calculations using a larger number of decimal places than that which appearson the display. By using this function, internal calculations will be performed usingonly the displayed value.

FIX mode TAB = 1 (normal calculation)

Rounded calculation (MDF)

(internally, 0.5555...)


(internally, 0.6)

APPLICATIONS:Frequently used in scientific and technical fields, as well as business,when performing chained calculations.

(In W-View mode, press to show the answer in decimal.)

10

5.0

0.6

0.6

5.4

5 9

9

5 9

9

Modify KeyFunction to round calculation results.Even after setting the number of decimal places on the display, the calculator per-forms calculations using a larger number of decimal places than that which appearson the display. By using this function, internal calculations will be performed usingonly the displayed value.

FIX mode TAB = 1 (normal calculation)

Rounded calculation (MDF)



(internally, 0.6)

APPLICATIONS:Frequently used in scientific and technical fields, as well as business,when performing chained calculations.

(In W-View mode, press to show the answer in decimal.)

11

The four basic operators. Each is used in the same way as a standardcalculator:+ (addition), – (subtraction), x (multiplication), and ÷ (division).

Used to specify calculations in which certain operations have precedence.You can make addition and subtraction operations have precedence overmultiplication and division by enclosing them in parentheses.

Finds the result in the same way as a standard calculator.

Basic ArithmeticKeys, Parentheses

12

125 10

Percent

125 20

125 15

125 5

For calculating percentages. Four methods of calculating percentagesare presented as follows.

1) $125 increased by 10%…137.5

2) $125 reduced by 20%…100

3) 15% of $125…18.75

4) When $125 equals 5% of X, X equals…2500

13

Operation Display

Inverse, Square, Cube, xth Power of y,Square Root, Cube Root, xth Root of y

2 2 2 2

4 16

2 4

Calculates the inverse of the value on the display.

Squares the value on the display.

Cubes the value on the display.

Calculates exponential values.

Calculates the square root of the value on the display.

Calculates the cube root of the value on the display.

Calculates the xth root of y.

13

Operation Display

Inverse, Square, Cube, xth Power of y,Square Root, Cube Root, xth Root of y

2 2 2 2

4 16

2 4

Calculates the inverse of the value on the display.

Squares the value on the display.

Cubes the value on the display.

Calculates exponential values.

Calculates the square root of the value on the display.

Calculates the cube root of the value on the display.

Calculates the xth root of y.

Design a shaft that bears a torque T (= 9,550 Nm). is a constant that is determined by the material of the shaft, and is taken to be = 20 N/mm2.

(Function for EL-W531X/EL-W535X/EL-W531XH/EL-W531XG/EL-W531)

Operation Display

16 9550

20

14

Power and Radical root

d = 16T3

Use instead of .

(Function for EL-W506X/EL-W516X/EL-W506)

If the principal is a (¥), the annual interest rate is r (%), and the number of years of interest accumulation is x (years), the final amount y (¥) is given by the following equation:

(1) Find the final amount when a principal of ¥400,000 is deposited for three years at an annual interest rate of 5% and the interest is compounded annually.

(2) When a principal of ¥300,000 is deposited for five years and the interest is compounded annually, the final amount is ¥339,422. The annual interest rate r is given by the equation below. Find the annual interest rate r.

(1)

(2)

xr = 100 - 1( )ya

5- 1339422300000

y = 400000 1 +( )51003

r = 100 ( )

5 100

300000

y = a ( 1 + r / 100 )x

400000 1

3

100

5 339422

1

Operation Display


15

16

The musical note A is 440 Hz. Calculate the frequencies of the notes in (1) to (3).(1) "C" of A, A# (B ), B, C

(2) "C" of A, G, F, E, D, C

(3) "A" one octave higher

(1)

(2)

12 2

440

3

12

(3)

12 2

440

12

3 2

2

400 x (12 2)3

400 x (12 2)12

400 x (12 2)3

2

440

Operation Display


17

1000

3

Operation Display

10 to the Power of x,Common Logarithm, Logarithm of x to Base a

Calculates the value of 10 raised to the xth power.

Calculates the logarithm, the exponent of the power to which 10 must beraised to equal the given value.

Calculates the logarithm of x to power a.

3 45

Operation Display

logE = 4.8 + 1.5M

logE - 4.81.5M =

(1)

(2)

1.5

1

1.5

2

If E (units: joules) is the amount of energy released by an earthquake and M is the magnitude, the relation

holds. If E' is the energy when the magnitude increases by N,

holds.

(1) When the magnitude increases by 1, by what factor does the energy increase?(2) When the magnitude increases by 2, by what factor does the energy increase?(3) The amount of energy in 20,000 tons of TNT is 8 x 1013 joules. When this energy is converted to a magnitude,

holds. Find the magnitude M.

= 101.5NE'E

18

Exponential, Logarithmic

(3)

4.8

8

13

1.5

Operation Display

1000000

1000000

101000

1000000 101000

0.01

1000000 0.01

0.434

Air is held inside a cylinder of volume V1 (= 0.01 m3) at a pressure P1 (= 1,000,000 Pa) at 27°C with a piston. Find the quantity of thermal energy Q needed to expand the air at constant temperature to a pressure of P2 (= 101,000 Pa).

19

Q = p1V1In p2p1

p2p1log

p1V10.434


Operation Display

20

Find the pH of hydrochloric acid HCl at a concentration of 1.0 x 10-8 mol/L* pH = 7 (neutral), pH < 7 (acidic), pH > 7 (alkaline)

pH = -log10 2- aa2+4x10-14a +( )

1.0

10

14

8

4

2

Enter the value of a

Calculate the pH




Use instead of .

21

10

5

Operation Display

e to the Power of x,Natural Logarithm

Calculates powers based on the constant e (2.718281828).

Computes the value of the natural logarithm, the exponent of the powerto which e must be raised to equal the given value.

22

Operation Display

7

FactorialsThe product of a given positive integer n multiplied by all the lesser positiveintegers from 1 to n-1 is indicated by n! and called the factorial of n.

c.fn! = 1 x 2 x 3 x …xn

APPLICATIONS:Used in statistics and mathematics. In statistics, this function is used in calculations involving combinations and permutations.

Operation Display

How many arrangements exist of cards of three colors: red, blue, and yellow?

3! = 3 x 2 x 1 = 6

3

23

Factorials

(2)

5

3 3

3

5

24

Operation Display

(1) When three cards are selected from five cards numbered 1 to 5 and placed in a row, how many possible orderings of the cards are there?

(2) When three cards are selected from five cards numbered 1 to 5, how many ways of selecting the cards are possible?

5P3 = 5 x 4 x 3

Let the number of ways of selecting the cards be C. There are 3! possible orderings of the cards, and thus when ordered in a row

Therefore C is

(1)

5

3

Permutations, Combinations

*This is written as 5C3.

C x 3! = 5P3

C = 5P3 ÷ 3!

13 x 4C2

12C3 x 43

43

52 5

Find the probability of drawing one pair when 5 cards are drawn from a deck of 52 cards. No jokers are included in the deck.Probability of drawing one pair = Ways of selecting one pair Ways of selecting 5 cards Ways of selecting one pair = Ways of selecting two cards to make a pair x Ways of selecting 3 remaining cards

Ways of selecting two cards to make a pairWays of selecting the number: 13 possibilities from 1 to 13 (King)Ways of selecting the suit: Two suits selected from four, 4C2Hence

Ways of selecting five cards 52C5The probability of drawing one pair is(13 x 4C2) x (12C3 x 43) 52C5

Ways of selecting remaining three cardsWays of selecting the number: Three types are selected from (13 - 1) types (13-1)C3

Ways of selecting the suit: For each number on the three cards, there are 4 types of suit 43Hence

Operation Display

413

12

2

25

Permutations, Combinations

26

Operation Display

6 4

6 4

Permutations, CombinationsThis function finds the number of different possible orderings in selectingr objects from a set of n objects. For example, there are six differentways of ordering the letters ABC in groups of three letters—ABC, ACB,BAC, BCA, CAB, and CBA.The calculation equation is 3P3 = 3 x 2 x 1 = 6 (ways).

This function finds the number of ways of selecting r objects from a set ofn objects. For example, from the three letters ABC, there are three wayswe can extract groups of two different letters—AB, AC, and CB.The calculation equation is 3C2.

APPLICATIONS:Used in statistics (probability calculations) and in simulation hypotheses in fields such as medicine, pharmaceutics, and physics. Also, can be used to determine the chances of winning in lotteries.

27

Matrix CalculationIn a certain year (year 0), the share of manufacturer A is 10% and the share of manufacturer B is 90%. Manufacturer A then releases a new product, and each following year it maintains 90% of the share ak it had the previous year (year k), and usurps 20% of the share bk of manufacturer B.Find the transition matrix for this process and the shares of manufacturers A and B after 5 years.

The share of each company after one year is expressed as follows using a0 and b0.

Thus, a1 and b1 are

The transition matrix is

: This is equal to matA2. (Refer to Example 1)

Answer

0.9 0.20.1 0.8A =

0.83 0.340.17 0.66A

2 =

a1 = 0.9a0 + 0.2b0b1 = (1-0.9)a0 + (1-0.2)b0

Expressing a2 and b2 using a0 and b0 givesa2 = 0.9(0.9a0 + 0.2b0) + 0.2(0.1a0 + 0.8b0) = (0.9 x 0.9 + 0.2 x 0.1)a0 + (0.9 x 0.2 + 0.2 x 0.8)b0 = 0.83a0 + 0.34b0b2 = 0.1(0.9a0 + 0.2b0) + 0.8(0.1a0 + 0.8b0) = (0.1 x 0.9 + 0.8 x 0.1)a0 + (0.1 x 0.2 + 0.8 x 0.8)b0 = 0.17a0 + 0.66b0

In the same way, after two yearsa2 = 0.9a1 + 0.2b1b2 = 0.1a1 + 0.8b1

a2 = 0.9a1 + 0.2b1 b2 = 0.1a1 + 0.8b1

In summary,a2 = 0.83a0 + 0.34b0 b2 = 0.17a0 + 0.66b0

Manufacturer A

Share 10%

20%

10%

20%20%

(Royalties) (Royalties)Manufacturer B

Share 90%

28

Finding a3 and b3 in the same way,

After 5 years: C = A5 = A2 x A3 (Refer to Example 2 - 1)

(Refer to Example 2 - 2)

Expressing the coefficients as a matrix gives

From the above, the coefficients of the calculation formula of each company's share after 5 years can be found by repeated application of matrix A.

: This is equal to matA3. (Refer to Example 1)0.781 0.4380.219 0.562A

3 =

a3 = 0.781a0 + 0.438b0b3 = 0.219a0 + 0.562b0

The shares of manufacturers A and B after 5 years and 10 years area2 = 0.72269a0 + 0.55462b0 = 57 %b2 = 0.27731a0 + 0.44538b0 = 43 %

Matrix Calculation

29

1 (MATRIX) 0

0

Calculate

1 (MATRIX) 0


Let

Find matA2 and matA3

Enter matA

Set the mode to Matrix

Matrix mode

matA = 0.9 0.20.1 0.8

Operation Display

4 (MATRIX)

4 (STORE)

2 (EDIT)

0.9 0.20.1 0.8

Matrix Calculation

30

Calculate the same way as in NORMAL mode

a5 = 0.77269 x 10 + 0.55462 x 90 = 57.6427b5 = 0.27731 x 10 + 0.44538 x 90 = 42.8573

1 (MATRIX)

1

0.77269 10

0.55462 90

57.6427

Calculate (1)

3.

1 (MATRIX) 2

(2)

Enter matC

4 (STORE)

2 (EDIT)

2 2

2

0.781 0.4380.219 0.562

0.27731 10

0.44538 90

42.8573

Matrix mode

Operation Display

Set the mode to Matrix

4 (MATRIX)

Enter matB

4 (STORE)

2 (EDIT)

2 2

1

0.83 0.340.17 0.66

Matrix Calculation

Let

0.83 0.340.17 0.66matB =

c de fmatD =

0.781 0.4380.219 0.562matC =

(1) Find matB x matC.

(2) The calculation result of (1) is

Letting a0 = 10, b0 = 90, Calculate a5 = ca0 + db0 b5 = ea0 + fb0


31

Matrix Calculation

1 (MATRIX)

1

0.77269 10

0.55462 90

57.6427

Calculate (1)

3.

1 (MATRIX) 2

(2)

Enter matC

4 (STORE)

2 (EDIT)

2 2

2

0.781 0.4380.219 0.562

0.27731 10

0.44538 90

42.8573

32

Operation Display

24 28 35

Time CalculationConverts a sexagesimal value displayed in degrees, minutes, seconds to decimal notation. Also, converts a decimal value to sexagesimal notataion (degrees, minutes, seconds).

Convert 24° 28’ 35” (24 degrees, 28 minutes, 35 seconds) to decimal notation. Then convert 24.476° to sexagesimal notation.

Inputs values in sexagesimal notation (degrees, minutes, seconds).

Convert to decimal notation

Repeat last key operation to return to the previous display.

APPLICATIONS:Used in calculations of angles and angular velocity in physics, and latitude and longitude in geography.

32

Operation Display

24 28 35

Time CalculationConverts a sexagesimal value displayed in degrees, minutes, seconds to decimal notation. Also, converts a decimal value to sexagesimal notataion (degrees, minutes, seconds).

Convert 24° 28’ 35” (24 degrees, 28 minutes, 35 seconds) to decimal notation. Then convert 24.476° to sexagesimal notation.

Inputs values in sexagesimal notation (degrees, minutes, seconds).


Repeat last key operation to return to the previous display.

APPLICATIONS:Used in calculations of angles and angular velocity in physics, and latitude and longitude in geography.

33

Operation Display

5

Fractional CalculationsInputs proper or improper fractions which consist of a numerator and denominator.

Inputs a mixed fraction.

12

57Add 3 and , and convert to decimal notation.

Convert to an improper fraction


APPLICATIONS:There is a wide variety of applications for this function because fractions are such a basic part of mathematics. This function is useful for calculations involving electrical circuit resistance.

3 1 2

7

34

25 27

7 3

Operation Display

~

~

Operation Display

Calculates $/¥ at the designated exchange rate.$1 = ¥110¥26,510 = $?$2,750 = ¥?

110

26510

2750

Memory Calculations�t�res dis�la�ed �alues in �e��ries �� .

�ecalls �alues st�red in �� .

�e��rar� �e��ries

�nde�endent �e��r�

�dds the dis�la�ed �alue t� the �alue in the inde�endent �e��r� �.

�u�tracts the dis�la�ed �alue �r�� the �alue in the inde�endent �e��r� �.

0��nter � ��r ��

35

y = 4 xandx = 2 + 3

Operation Display

2 3

4

Last Answer MemoryAutomatically recalls the last answer calculated by pressing

Solve for x first and then solve for y using x.



Use instead of .

36

Operation Display

User-Defined FunctionsRecall a function that was defined by the user.

APPLICATIONS:Functions that you have previously defined, including those using common 2nd Function buttons, can be stored in D1~ D4 for later use, thus saving time on keystrokes.

26

~

~

37

Operation

Absolute ValueReturns an absolute value.

Display

3

-4

38

[DEG mode]

Operation Display

sinθ = ba

tanθ = bc

cosθ = ca

a

c

b

θ

Trigonometric functions determine the ratio of three sides of a right triangle. The combinations of the three sides are sin, cos, and tan. Their relations are:

alculates the sine of an angle.

alculates the cosine of an angle.

alculates the tangent of an angle.

The angle from a oint 1 meters froma building to the highest floor of thebuilding is . o tall is the building

45 15

1 5View point

��O��Trigonometric functions are useful in mathematics and arious engineering calculations. The are often used in astronomical obserations, ciil engineering and in calculations inoling electrical circuits, as ell as in calculations for hsics such as arabolic motion and ae motion.

Trigonometric Functions

39

Find the length of the side of the following triangle.

30

20

A

B

B

C CA

a xy

2

17

b

a = 20 sin 30b = 20 cos 30x = tan17

2

y = sin172

[DEG mode]

Operation Display

0 (DRG)

0 (DEG)



40

20 30

20

17

2

30

17

2



Use instead of .

41

The instantaneous value V of the AC voltage is expressed by the equation below.

Find the instantaneous value of the AC voltage at time t = 2.000, 2.002, 2.004, 2.008, 2.012, 2.016

Operation Display

0 (DRG)

1 (RAD)

2

2

2

100

2.00060

Root mean square value Ve = 100 [V]Frequency f = 60 [Hz]

V = 2Vesin(2 ft) [V]



42

4

8

12

16



Use instead of .

Use instead of .

Use instead of .

43

[DEG mode]

Operation Display

θ = sin-1 ba

θ = cos-1 ca

θ = tan-1 bc

c

ab

θ

100

80

Arc Trigonometric FunctionsArc trigonometric functions, the inverse of trigonomet-ric functions, are used to determine an angle from ratiosof a right triangle. The combinations of the three sidesare sin-1, cos-1, and tan-1. Their relations are;

(arc sine) Determines an angle based on the ratiob/a of two sides of a right triangle.

(arc cosine) Determines an angle based on the ratioc/a for two sides of a right triangle.

(arc tangent) Determines an angle based on theratio b/c for two sides of a right triangle.

At what angle should an air�lane climb in orderto climb �� meters in 1�� meters�

44

The length L of rope that creates this sag is expressed by the following equation.

When a = 0.846 and b = 2, find the rope sag D and the rope length L.

* The value a is called the catenary factor, and determines the shape of the curve.

D = acosh 2a ab -

L = 2asinh 2ab

Operation Display

0.846

0.846

0.846

2

2

The curve that forms when a rope hangs from two fixed points is called a "catenary", and the sag D of the rope can be expressed using a hyperbolic function.

0.846

0.846

2

2 2

Catenary

b (width between fixed points)

Sag D

Hyperbolic

45

A = 6.82B = 1.44(A and B are constants determined by a raindrop diameter of 1 mm and the physical properties of air.)

Find the fall velocity at time t = 0, 1, 2, 5, 10, 15.

*As the calculations are continued, v approaches 6.82. Therefore, the velocity of a raindrop is about 6.82 m/s (24.6 km/h) when it reaches the ground.

Note: The fall distance from time t = 0 to 15 [s] is given by the following equation. (Calculation of integral)

v = AtanhBt [m/s]

Additional note: Simulation calculationThis function is convenient for repeated calculations using varying values of X.1. Enter Atanh(BX) (use the characters A, B, and X to enter)

[DEG mode]

Answer

Operation Display

A drop of rain falls against an air resistance proportional to the square of the fall velocity. The velocity v at time t seconds after the start of the fall is given by the following equation:

B

X

(6.82tanh(1.44x))dx = 99.0171851815

0

Hyperbolic

x01251015

v06.09501856.7771538516.8199923976.826.82

B X


46

2. Press the [MATH] key and select [ALGB]

For example,

4. Enter the value of B

3. Enter the value of A

5. Enter the value of X

6. The answer is obtained.Repeat 2 to 6

(If 6.82 appears, press only the key)6.82

(If 1.44 appears, press only the key)1.44

1

1 (ALGB)

Hyperbolic B X

47

Hyperbolic FunctionsThe hyperbolic function is defined by using natural exponents in trigo-nometric functions.

Arc hyperbolic functions are defined by using natural logarithms in trigono-metric functions.

APPLICATIONS:Hyperbolic and arc hyperbolic functions are very useful in electrical engineering and physics.

48

Rectangular coordinates

P (x,y)

y

xo

y

x

y

P (r,θ)

xo

r

Polar coordinates

θ

[DEG mode]Operation Display

7 3

7.6 23.2

Coordinate Conversion

θConverts rectangular coordinates to polar coordinates (x, y → r, )

θConverts polar coordinates to rectangular coordinates (r, → x, y)

Splits data used for dual-variable data input.

Determine the polar coordinates (r, ) when the rectangu-lar coordinates of Point P are (x = 7, y = 3).

θ

��O��Coordinate conversion is often used in mathematics and engineering, espe-cially for impedance calculations in electronics and electrical engineering.

49

Binary, Pental, Octal, Decimal, and Hexadecimal Operations (N-Base)This calculator can perform conversions between numbers expressed in binary, pental, octal, decimal, and hexadecimal systems. It can also perform the four basic arithmetic operations, calculations with parentheses and memory calculations using binary, pental, octal, decimal, and hexadecimal numbers. In addition, the calculator can carry out the logical operations AND, OR, NOT, NEG, XOR, and XNOR on binary, pental, octal, and hexadecimal numbers.

Conversion is performed on the displayed value when these keys are pressed.

Operation Display HEX(1AC) �BIN �PEN �OCT �DEC

1011 AND 101 = (BIN) �DECOperation Display

1AC

1011101

Converts to the binary system. IN appears.Converts to the pental system. EN appears.Converts to the octal system. OCT appears.

Converts to the hexadecimal system. EX appears.Converts to the decimal system. IN , EN , OCT , and EX disappear from the display.

50

d/dx xDifferentiation calculation

D = - 24P25920

If the demand curve is expressed by

find the price elasticity of demand when P=360 (D=48).*Price elasticity of demand: A value that indicates how sensitive demand is to changes of price.

PdPDdD

DP

dPdDPrice elasticity

of demand

Rate of demand changeRate of price change

= = =- - -

Operation Display

48

24

360

360

25920d/dx

x

Find the following value when P=360 and D=48.

x = 360

- 24x25920

DP d( )

dx-


51

The semicircle above is given by the equation

Find the slope of the tangent AB at point B (-1/2, 3/2) on the semicircle.

x = -dx 21d

( )

Operation Display

1

1

2

d/dx

x

- x21y =

- x21

AO

120

1

B (-1/2, 3/2)

Differentiation calculationxd/dx


52

Integration calculation

(1)

Let the demand curve of the overall market be D = 3000 - 10P, the supply curve be S = 20P, the equilibrium price be 100, and the equilibrium output be 2000.

(1) Find the consumer surplus of the overall market.

(2) Find the producer surplus of the overall market.

(3) Find the total surplus of the overall market.

(3000 - 10x - 2000) dx

Operation Display

100

10

3000

2000

0

x

x

dx

(2)

100

20

2000

0

x

dx

dx

100

0

(2000 - 20x) dx100

0

(3000 - 10x - 20x) dx100

0


53

(3)

100

10

20

3000

0

x

x

dx

Integration calculation xdx

54

Operation Display

1

1

0

x

- x21y =- x21y =

dx

O 1dx

The fan shaped curve at left is given by the equation

Find the area of the fan shape with radius 1 and central angle 90 .

- x211

dx0

xdxIntegration calculation


55

Let the hydrochloric acid concentration be c (= 1.0 x 10-8 mol / ), and the hydrogen ion concentration be x.

(1) Solve the following quadratic equation to find the hydrogen ion concentration x: x2 - cx - Kw = 0

where Kw = 1.0 x 10-14 [mol / ] (ionic product of water)

(2) Use the result of (1) to find the pH (= - log x) of hydrochloric acid.

Save constants

(1)

pH = - log x (x>0)

1.0 14

0 (NORMAL)

Operation

1.0 8

B

B

C

CPolynomial equation

Display


56

Set the mode to Equation

6 (EQUATION) 2 (QUAD)

0.000000105

Solve the equation (enter coefficients a, b, c)

1C

B

Set the mode to Normal

0 (NORMAL)

(2)

B CPolynomial equation

57

Let the acetic acid concentration be c (= 0.1 mol / ), and the hydrogen ion concentration be x.

(1) Solve the following quadratic equation to find the hydrogen ion concentration x: x3 + Kax2 - (cKa + Kw)x - KaKw = 0

where Ka = 2.75 x 10-5 [mol / ] (ionization equilibrium constant of acetic acid) Kw = 1.0 x 10-14 [mol / ] (ionic product of water)

(2) Use the result of (1) to find the pH (= - log x) of acetic acid.

Save constants

(1)

pH = - log x (x>0)

2.75 5

0 (NORMAL)

Operation

1.0

0.1

14

B

C

Display

Polynomial equation CB


58


6 (EQUATION)3 (CUBIC)

0.001644619

Solve the equation (enter coefficients a, b, c, d)

1

C

B

B


0 (NORMAL)

(2)

Polynomial equation CB

59

To produce one unit of product X, 3 kg of material A and 1 kg of material B are required.To product one unit of product Y, 1 kg of material A and 2 kg of material B are required.There are 9 kg of A and 8 kg of B in stock.If the selling price of product X is 30,000 yen/unit and the selling price of product Y is 20,000 yen/unit, how many units of product X and how many units of product Y should be produced in order to maximize sales K?(Do not include the cost of materials and production or other expenses)

If the quantities produced of each product are x and y, the sales K can be expressed as K = 3x + 2yThe following relations hold for the quantities in stock: 3x + y 9 x + 2y 8 x 0, y 0Based on these conditions, find the values of x and y that maximize sales K.

The conditions can be graphed as shown above.The sales K is a maximum where the line K = 3x + 2y passes through the intersection point P of lines 3x + y = 9 and x + 2y = 8.

The intersection point P can be obtained from the following simultaneous equations: 3x + y = 9 x + 2y = 8Solving these gives x = 2, y = 3and thus the maximum value of the sales K is K = 3 x 2 + 2 x 3 = 12 (x 10,000) yen (when x = 2 units and y = 3 units)

9

4

2

0 3

y

P

K=3x+2y

x8

K

Simultaneous Calculation(Function for EL-W506X/EL-W516X/EL-W506)

60

(1) Solve the following simultaneous equations. 3x + y = 9 x + 2y = 8

K = 3x + y(2) Use the result of (1) to find the following value.



Enter the coefficients a1 = 3 , b1 = 1 , c1 = 9 a2 = 1 , b2 = 2 , c2 = 8

(1)

(2)

0 (2-VLE)

6 (EQUATION)

Operation

0 (NORMAL)

3 1 9

1 2 8

3 2

2 3

Simultaneous Calculation

Display

61

When ethanol C2H5OH is completely combusted, carbon dioxide CO2 and water H2O are created.The chemical reaction formula of this reaction is expressed as follows: x C2H5OH + 3O2 y CO2 + z H2O

Find the values of x, y, and z to complete the chemical reaction formula.

The numbers of C, H, and O before and after the reaction are equal, hence Number of C: 2x = y Number of H: 5x + 1 = y Number of O: x + 3 x 2 = zAs such, the following simultaneous equations are obtained: 2x - y + = 0 6x - 2z = 0 x - 2y - z = - 6Solving these gives x = 1, y = 2, z = 3and the chemical reaction formula is C2H5OH + 3O2 2CO2 + 3H2O

Enter the coefficients


a1 = 2 , b1 = -1 , c1 = 0 , d1 = 0 a2 = 6 , b2 = 0 , c2 = -2 , d2 = 0 a3 = 1 , b3 = -2 , c3 = -1 , d3 = -6

1 (3-VLE)

6 (EQUATION)

Operation

2 1 0

0 6 0

2 0 1

2 1 6

Simultaneous Calculation

Display


62

An AC sine wave voltage of 100 V, 50 Hz is applied to a circuit consisting of a resistor (R = 250 ) and capacitor (C = 20 x 10-6F) connected in parallel. Find the impedance of this circuit.

Circuit impedance = Value of polar coordinate r

Complex mode

(Rectangular coordinates)

(Angle units: RAD)

(Polar coordinates)

3 (CPLX)

0 (DRG)

1 (RAD)

Operation

1

2

1 250

50 20

6i

Let R = 250, C = 20 x 10-6, and f = 50. If the complex number Z = 1 ((1 R) + 2 fCi), find the value of the complex number Z and the values of r.

i

Display

Complex Calculation(Function for EL-W506X/EL-W516X/EL-W506)

63

An AC sine wave voltage of 100V, 60Hz is applied to a circuit consisting of a resistor (R = 120 ), coil (L = 4 H), and capacitor (C = 3 x 10-6F) connected in series.

(1) Find the impedance of the circuit.(2) Find the phase difference between the current and the voltage.

Circuit impedance = Value of polar coordinate r

(rectangular coordinats)

(Angle units: DEG)

(Polar coordinates)

0 (DRG)

0 (DEG)

Operation

120

3

2

2

60

1

6

4

60

i

i

Phase difference = Polar coordinateLet R = 120, L = 4, C = 3 x 10-6, and f = 60. If the complex number Z = R + 2 fLi + 1 (2 fCi), find the value of the complex number Z and the values of r and .

i

Display

Complex Calculation


64

Operation Display

Data table 1

No.ScoreNo. of pupils

1 2 3 4 5 6 7 8 30 40 50 60 70 80 90 100 2 4 5 7 12 10 8 2

Select single-variable statistics mode

Statistics FunctionsThe statistics function is excellent for analyzing qualities of an event. Though primarilyused for engineering and mathematics, the function is also applied to nearly all otherfields including economics and medicine.

DATA INPUT AND CORRECTIONEnters data for statistical calculations.

Splits data used for dual-variable data input.(Used for dual-variable statistical calculations.)

Here is a table of examination results. Input this data for analysis.

Clears data input.

.

.

.

30 2

100 2

64

Operation Display

Data table 1

No.ScoreNo. of pupils

1 2 3 4 5 6 7 8 30 40 50 60 70 80 90 100 2 4 5 7 12 10 8 2


Statistics FunctionsThe statistics function is excellent for analyzing qualities of an event. Though primarilyused for engineering and mathematics, the function is also applied to nearly all otherfields including economics and medicine.

DATA INPUT AND CORRECTIONEnters data for statistical calculations.

Splits data used for dual-variable data input.(Used for dual-variable statistical calculations.)

Here is a table of examination results. Input this data for analysis.

Clears data input.

.

.

.

30 2

100 2

65

Calculates the average value of the data (sample data x).

Calculates the standard deviation for the data (sample data x).

Calculates the standard deviation of a data population (sample data x).

Displays the number of input data (sample data x).

Calculates the sum of the data (sample data x).

Calculates the sum of the data (sample data x) raised to the second power.

NOTE:1. Sample data refers to data selected randomly from the population.2. Standard deviation of samples is determined by the sample data shift from an average value.3. Standard deviation for the population is standard deviation when the sample data is deemed a population (full data).

Let’s check the results based on the previous data.

“ANS” KEYS FOR 1-VARIABLE STATISTICS

69 (average value)

17.75686128 (standard deviation)

17.57839583 (standard deviation of the population)

50 (total count of data)

3450 (total)

When the weight of a calculator was measured, the results at left were obtained. Find the average and standard deviation of the weight.

Average

Select Statistics mode

1 (STAT) 0 (SD)

Operation

97.27

No1 97.27

96.8396.65

234 96.905 96.77

Weight [g]

96.83

96.77...

Standard deviation

66

Display

67

When a weight was hung on a spring, the following relation was obtained for the extension of the spring and the force applied to the spring. Use linear regression to find the coefficients a and b of the relational expressiony = a + bx, and the correlation cofficient r.


1 (STAT) 1 (LINE)

Operation

0.028 0.20

0.073

0.207...

Spring extension x [m] Force F [N]0.0280.073

0.207

0.1180.16

0.20.39

1

0.60.77

0.39

1.00

a

b

r

Display

68

2. (Cartesian coordinates)

(Angle units: RAD)

(Polar coordinates)

1

2

1 250

50 20

6 i

3. Standard deviation

The hot water inside an electric pot is maintained at 92 C.When a thermometer is placed in this hot water, the values indicated by the thermometer at times x and the differences y between these values and the temperature of the hot water are shown below. Using Euler's exponential regression, find the formula that expresses the relation between each time x and the temperature difference y.


1 (STAT) 3 (E_EXP)

0 (DRG)

1 (RAD)

Operation

0 67

4

40...

37

1

Temperature difference y [ C] from liquid(Room temperature 25 C, hot water temperature 92 C)Time x [S] Thermometer temperature [ C]

048

1216202428323640

2555717985889090919191

673721137422111

e: Napier's constante=2.718281828…

Display

When x and y are in the following relationship, use Euler's exponential regression to find the coefficients a and b of the relational expression y = aebx, and the correlation coefficient r.

0x y

48

1216202428323640

67372113

7422111

Correlation coefficient

r 1Correlation exists

Fig. 1 Fig. 2 Fig. 3

Correlation exists No correlationr -1 r = 0

y

x

x xx x

x xx x

x xx x xx x

x xxx x

x

x

xx

x x

xx

x

x

xx

x x

y y

69

2. (Cartesian coordinates)

(Angle units: RAD)

(Polar coordinates)0 (DRG)

1 (RAD)

1

2

1 250

50 20

6 i

3. Standard deviation

a

b

r

70

Operation Display

Correction after pressing :

Correction prior to pressing immediately after a data entry: Delete incorrect data with , then enter the correct data.

Use to display the data previously entered.Press to display data items in ascending (oldest first) order. To reverse the display order to descending (latest first), press the key.Each item is displayed with 'X:', 'Y:', or 'F:' (n is the sequential number of the data set).Display the data item to modify, input the correct value, then press . Using , you can correct the values of the data set all at once.• When or appears, more data items can be browsed by pressing or .• To delete a data set, display an item of the data set to delete, then press . The data set will be deleted.• To add a new data set, press and input the values, then press .

Data table 2X: 30, 40, 40, 50

X: 30, 45, 45, 45, 60


40 2

50

30

DATA CORRECTION

71

Operation Display

45 3

60

APPLICATIONS:Single-variable statistical calculations are used in a broad range of fields, including engineering, business, and economics. They are most often applied to analysis in atmospheric observations and physics experiments, as well as for quality control in factories.

72

Data table 3

Operation Display

6.2 13

6.1 15

8.2 7

The table below summarizes the dates in April when cherryblossoms bloom, and the average temperature for March inthat same area. Determine basic statistical quantities fordata X and data Y based on the data table.

Select dual-variable statistics mode and linear regression calculation in sub-mode.

1998 1999 2000 2001 2002 2003 2004 2005 6.2 7.0 6.8 8.7 7.9 6.5 6.1 8.2 13 9 11 5 7 12 15 7

Yearx Average temperaturey Date blossoms bloom

.

.

.

73

“ANS” KEYS FOR 2-VARIABLE STATISTICSIn addition to the 1-variable statistic keys, the following keys have been added for calcu-lating 2-variable statistics.

NOTE:The codes for basic statistical quantities of sample data x and their meaningsare the same as those for single-variable statistical calculations.

Let’ s check the results based on the previous data.

Calculates the sum of the product for sample data x and sample data y.

Calculates the sum of the data (sample data y).

Calculates the sum of the data (sample data y) raised to the second power.

Calculates the average value of the data (sample data y).

Calculates the standard deviation for the data (sample data y).

Calculates the standard deviation of a data population (sample data y).

7.175 (Average for data x)

0.973579551 (Standard deviation for data x)

0.91070028 (Standard deviation of the population for data x)

9.875 (Average for data y)

3.440826313 (Standard deviation for data y)

3.218598297 (Standard deviation of the population for data y)

8 (Total count of data)

57.4 (Sum of data x)

418.48 (Sum of data x raised to the second power)

544.1 (Sum of the product of data x and data y)

79 (Sum of data y)

863 (Sum of data y raised to the second power)

SHARP CORPORATION (APR. 2019)19DSC42E2

Documents

SCIENTIFIC CALCULATOR OPERATION GUIDE...(FIX mode TAB = 3) (SCI mode) (ENG mode) (normal mode) The distance from the earth to the sun is approx. 150,000,000 (1.5 x 108) km. Values