Scando 650 Variations.pdf

7/26/2019 Scando 650 Variations.pdf

1/16

3825

E

F

2500

2000

*

Pay-load capacity (fuse 100 A) kg 1800 1700 1700 1600


Speed 50 Hz / 60 Hz m/min 0 65 0 65 0 65 0 65

Max. lifting height meter 200 200 200 200

Increased lifting height on request

No. of buffer springs pcs. 3 3 3 3

Safety device type GFD P/no. 9099255-1014

CAR DIMENSIONS

Internal width meter 1.5 1.5 1.5 1.5

Internal length meter 3.9 3.9 3.9 3.9

External length ( E ) meter add 0.12 m to internal length above

Internal height meter 2.3 2.3 2.3 2.3

Door opening W x H meter 1.5 or 3.2 4) x 2.0

ELECTRICAL DATA

Power supply range 400 500 V, 50 or 60 Hz, 3 PhaseAt 400 V/50 Hz: (step-up transformer above 160 m required)

Power supply fuses A~ 100 or 125 alternatively

Triple motor machinery kW 3 x 11

Starting current (fuse 100 A) A~ 97


Power consumpt.(fuse 100 A) kVA~ 58


Power cable guiding system Cable trolley

Data for other voltages on request

WEIGHTS

Base unit weight approx. kg 3450 2) 2) 2)

Mast section with one rack kg 115 115 115 115Mast section with two racks kg 135 135 135 135

Mast section length mm 1508 1508 1508 1508

TRANSPORT DIMENSIONS

Base unit incl. ground enclosure:

Length ( F ): m add 0.50 3)m to external length (E)

Width (G): m 2.55 2.6 4) 2.55 2.6 4)

Maximum height: m 3.10 3.10 3.10 3.10

machinery excl.

S C A N D O 6 5 0 F C / 3 9

3.9 m car with two 1) vertical doors X (C52)

3.9 m car with three vertical doors X (C53)

3.9 m car with one load ramp and one 1) vertical door X (C55)

3.9 m car with one load ramp and two vertical doors X (C56)

No 1220 E Dec. -07.

1) A 1.5 ms slim 3rd exit door also possible.

2)

Weights indicated for base model including standard entrance and exit door.Add additional 147 kg or 117 kg respectively, where optional load ramp occurs.

3) Add additional 0.1 m where accessories for pipe support equipment are added to the ground enclosure.

4) Is intended for the 3rd vertical lift door (location C). Add additional 235 mm to G, where double leaf swing door occurs.

G

Dua

lcars

4280

,

4380

or

4850

mm

1500

1492

ALIMAK AB, P O Box 720, SE-931 27 Skellefte, Sweden. Tel. +46 910 87000.

Fax +46 910 56690. E-mail: [email protected]. Web site: www.alimak.com.

* Maximum height

2300 mm possible

with all 1.5 m wide

doors


2/16

S C A N D O 6 5 0 M o d u la r S y s te m

No 1220 E Dec. -07.

Pictures are illustrative only and do not necessarily show the configuration of products on the market at the given point in time. Products must be used in conformity with safe

practice and applicable statues, regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice.

Printed in Sweden

3.5 m car base structure incl. safety railings (100 kg)

weight 1116 kg

Triple motor machineryincl. VFC-panel (75 kW). Weight 890 kg

Exit door combined with

optional electric / hydraulic

operated load ramp.

Weight 280 kg.

Add 147 kg when changed

from standard exit door.

Vertical full height

entrance door, weight 155 kg

Vertical exit door

in two parts,

weight 133 kg

Vertical slim

1.5 m exit door in two

parts, weight 75 kg


slim 3.2 m entrance

door, weight 210 kg


optional manual load ramp.

Weight 250 kg.



Closed, solid wall

on exit side,

weight 55 kg


3/16

3825

E

F

2500

2000

*

Pay-load capacity (fuse 125 A) kg 2500 2500

Speed 50 Hz / 60 Hz m/min 0 54 0 54

Max. lifting height meter 200 200


No. of buffer springs pcs. 3 3


CAR DIMENSIONS

Internal width meter 2.0 2.0

Internal length meter 5.0 5.0


Internal height meter 2.3 2.3

Door opening W x H1)

meter A & B= 2.0x2.0 C=2.0x2.0 or 3.2x2.0

ELECTRICAL DATA


Power supply fuses A~ 125






WEIGHTS

Base unit weight approx. kg 4150 4550

Mast section with one rack kg 115 115Mast section with two racks kg 135 135

Mast section length mm 1508 1508




Width (G): m 3.05 3.05

Maximum height: m 3.10 3.10

machinery excl.

S CANDO 6 5 0 F C 5 0

Extended 5.0 m car with two 1) vertical doors X

Extended 5.0 m car with three vertical doors X

Extended 5.0 m car with one load ramp and one 1) vertical door NA

Extended 5.0 m car with one load ramp and two vertical doors NA

Order No 809620 - 21 / 2(2) rev. A

1)A 1.5w x 2.0h or 3.2w x 2.0hslim 3rd exit door(c-gate) also possible.

2)

Weights indicated for base model including standard entrance and exit door.


G

5280

2000

1992



* Maximum height

2300 mm possible

with all 2.0 m wide

doors


4/16

Order No 809620 - 21 / 2(2) rev. A



Printed in Sweden



weight 1640 kg

Additional section

to increase car length

0.55 m in one or two

sides (0.55 + 0.55 m).

Weight 150 kg each.


Vertical full height exit &



slim 3.2 m entrance

door, weight 250 kg

Closed, solid wall

on exit side,




5/16

4325

E

F

2500

2500

*


Speed 50 Hz / 60 Hz m/min 0 54 0 54





CAR DIMENSIONS





Door opening W x H meter all equal =2.0x 2.5

ELECTRICAL DATA








WEIGHTS




TRANSPORTDIMENSIONS



Width (G): m 3.05 3.05


machinery excl.

S CANDO 6 5 0 FC 5 0

Extended 5.0 m car with two 1) vertical doors X

Extended 5.0 m car with three vertical doors X

Extended 5.0 m car with one load ramp and one vertical door NA

Extended 5.0 m car with one load ramp and two vertical doors NA

1)Add additional 0.1 m where accessories for pipe support equipment are added to the ground enclosure.

G

5280

2000

1992



* Maximum height

2800 mm possible

with all 2.0 m wide

doors

Preliminary 2.0 x 5.0 x 2.8 2(2)


6/16

Preliminary 2.0 x 5.0 x 2.8 2(2)



Printed in Sweden



weight 1640 kg

Additional section

to increase car length

0.55 m in one or two

sides (0.55 + 0.55 m).

Weight 150 kg each.





slim 3.2 m entrance

door, weight 250 kg

Closed, solid wall

on exit side,




7/16

3825

E

F

2500

2000

*


Speed 50 Hz / 60 Hz m/min 0 54 0 54





CAR DIMENSIONS





Door opening W x H meter 2.0x 2.0(A & B), 3.2 x 2.0 (C)

ELECTRICAL DATA








WEIGHTS







Width (G): m 3.05 3.05


machinery excl.

S C A N D O 6 5 0 F C / 3 9

3.9 m car with two 1) vertical doors X

3.9 m car with three vertical doors X

3.9 m car with one load ramp and one 1) vertical door NA

3.9 m car with one load ramp and two vertical doors NA

Order No 809620 - 21 / 1(2) rev. A

1) A 1.5 m slim 3rd exit door (c-side) also possibleinstead of 3.2m.

2) Weights indicated for base model including standard entrance and exit door.


G

5280

2000

1992



* Maximum height

2300 mm possible

with all 2.0 m wide

doors

C

A

B


8/16

Order No 809620- 21/ 1(2)rev. A




weight 1640 kg



Printed in Sweden




slim 3.2 m entrance

door, weight 250 kg

Closed, solid wall

on exit side,




9/16


10/16


11/16

3825

E

F

2500

2000

*



Speed 50 Hz / 60 Hz m/min 0 54 0 54 0 54 0 54

Max. lifting height meter 200 200 200 200


No. of buffer springs pcs. 3 3 3 3


CAR DIMENSIONS

Internal width meter 1.5 1.5 1.5 1.5

Internal length meter 3.9 3.9 3.9 3.9


Internal height meter 2.3 2.3 2.3 2.3

Door opening W x H meter 1.5 or 3.2 4) x 2.0

ELECTRICAL DATA


Power supply fuses A~ 100 or 125 alternatively








WEIGHTS

Base unit weight approx. kg 3450 2) 2) 2)

Mast section with one rack kg 115 115 115 115Mast section with two racks kg 135 135 135 135

Mast section length mm 1508 1508 1508 1508




Width (G): m 2.55 2.6 4) 2.55 2.6 4)

Maximum height: m 3.10 3.10 3.10 3.10

machinery excl.

S C A N D O 6 5 0 F C / 3 9

3.9 m car with two 1) vertical doors X (C52)

3.9 m car with three vertical doors X (C53)

3.9 m car with one load ramp and one 1) vertical door X (C55)

3.9 m car with one load ramp and two vertical doors X (C56)

No 1218 E Dec. -07.

1)A 1.5 ms slim 3rd exit door also possible.

2)

Weights indicated for base model including standard entrance and exit door.Add additional 147 kg or 117 kg respectively, where optional load ramp occurs.


4) Is intended for the 3rd vertical lift door (location C). Add additional 235 mm to G, where double leaf swing door occurs.

G

Dual

cars

4280

,

4380

or

4850

mm

1500

1492



* Maximum height

2300 mm possible

with all 1.5 m wide

doors


12/16

No 1218 E Dec. -07.




Printed in Sweden


weight 1116 kg



optional electric / hydraulic

operated load ramp.

Weight 280 kg.





Vertical exit door

in two parts,

weight 133 kg

Vertical slim

1.5 m exit door in two

parts, weight 75 kg


slim 3.2 m entrance

door, weight 210 kg


optional manual load ramp.

Weight 250 kg.



Closed, solid wall

on exit side,

weight 55 kg


13/16


14/16


15/16


16/16

Documents

Scando 650 Variations.pdf