Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Date received: 05/02/18
Date of issue: 16/02/18
Report consists of 7 test reports.
Sample name: Chair EOS
SAMPLE N° 245844
List performed tests: 1. Outdoor furniture - General safety requirements EN 581-1:2017 2. Stability - EN 1022:2005 3. Seat and back static load test EN 1728:2012+AC:2013 4. Seat and back fatigue test EN 1728:2012+AC:2013 5. Leg forward static load test EN 1728:2012+AC:2013 6. Leg sideways static load test EN 1728:2012+AC:2013 7. Seat impact test EN 1728:2012+AC:2013
SAVAS PLASTIK SAN. VE. TIC. A.S.BEYSAN SAN. SIT. BIRLIK CAD. NO: 18-BEY.34524 ISTANBUL ()TR - TURKEY
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
Page 1 of 2
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
Defects before testing: None
Overall dimensions: 470 x 460 x 820 (h) mm
Tests, certification and research
CATAS S.p.A. via Antica, 24/3 33048 San Giovanni al Natisone (UD) +39 0432 747211 - [email protected] www.catas.com
Testing site: via Braide Matte, 4 33048 San Giovanni al Natisone (UD) tel. +39 0432 747211 [email protected]
Date of issue: 16/02/18
Sample name: Chair EOS
SAMPLE N° 245844
Page 2 of 2
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
Side view Rear view
Bottom view
Sample weight: Not determined
Tests, certification and research
CATAS S.p.A. via Antica, 24/3 33048 San Giovanni al Natisone (UD) +39 0432 747211 - [email protected] www.catas.com
Testing site: via Braide Matte, 4 33048 San Giovanni al Natisone (UD) tel. +39 0432 747211 [email protected]
TEST REPORT
245844 / 1Date received: 05/02/18Date of test: 06/02/18Date of issue: 16/02/18Sample name: Chair EOS
Outdoor furniture - General safety requirements EN 581-1:2017
SAVAS PLASTIK SAN. VE. TIC. A.S.BEYSAN SAN. SIT. BIRLIK CAD. NO: 18-BEY.34524 ISTANBULTR - TURKEY
Tests, certification and research
CATAS S.p.A. via Antica, 24/3 33048 San Giovanni al Natisone (UD) +39 0432 747211 - [email protected] www.catas.com
Testing site: via Braide Matte, 4 33048 San Giovanni al Natisone (UD) tel. +39 0432 747211 [email protected]
5.1 General:Observed RemarksRequirement
Edges of seat, back rest and arm rests rounded andchamfered Yes None
All other parts: free from burrs, sharp edges andsharp points. Yes NoneMovable and adjustable parts designed so thatinjuries and inadvertent operation are avoided Not present None
Any load bearing part of forniture not come looseunintentionally Yes None
Lubricated parts are protected Not present None
5.2 Tubular components:Observed RemarksRequirement
Absence of tubulat components with diameter> 7 mm and < 12 mm with a depth > 10 mm. Yes None
Tubulars in contact with the floor are closed. Holesin them are allowed as long as they are < 7 mm or> 12 mm
Yes None
5.3 Shear and squeeze points:Observed RemarksRequirement
Shear and squeeze points that are created onlyduring adjusting and folding away are acceptableif the user has the control of his/her movements.
Not present None
Absence of shear and squeeze points, createdby parts operated by powered mechanism. Not present None
Absence of shear and squeeze points, createdby loads applied during normal use. Yes None
Conformity to requirements of clause 5 of standard EN 581-1:2017: YES
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
245844 / 2Date received: 05/02/18Date of test: 06/02/18Date of issue: 16/02/18Sample name: Chair EOS
Stability - EN 1022:2005
SAVAS PLASTIK SAN. VE. TIC. A.S.BEYSAN SAN. SIT. BIRLIK CAD. NO: 18-BEY.34524 ISTANBULTR - TURKEY
Tests, certification and research
CATAS S.p.A. via Antica, 24/3 33048 San Giovanni al Natisone (UD) +39 0432 747211 - [email protected] www.catas.com
Testing site: via Braide Matte, 4 33048 San Giovanni al Natisone (UD) tel. +39 0432 747211 [email protected]
Type of chair: fixed geometry
: 20 N does not overturn
Minimum horizontal force for rearwards overturning of fixed back chair: 166 N
Forwards overturning Horizontal force
Rearwards overturning
: 161 N overturns Fixed back chair Horizontal force
Tilting chair in the rearmost position: /
N does not overturn
Loading discs on the seat
Sideways overturning for chairs with arms: / Horizontal force
Sideways overturning for chairs without arms: 20 Horizontal force
Forwards overturning for chairs with footrest: / Horizontal force
Test fail
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
245844 / 3Date received: 05/02/18Date of test: 08/02/18Date of issue: 16/02/18Sample name: Chair EOS
Seat and back static load test EN 1728:2012+AC:2013
SAVAS PLASTIK SAN. VE. TIC. A.S.BEYSAN SAN. SIT. BIRLIK CAD. NO: 18-BEY.34524 ISTANBULTR - TURKEY
Tests, certification and research
CATAS S.p.A. via Antica, 24/3 33048 San Giovanni al Natisone (UD) +39 0432 747211 - [email protected] www.catas.com
Testing site: via Braide Matte, 4 33048 San Giovanni al Natisone (UD) tel. +39 0432 747211 [email protected]
Seat and back static load test, clause 6.4
Back forceN
Numberof cycles Remarks
EN 16139
SI NO
EN 12520
SI NO IKEA IOS-PRF-0040 SI NOTest results:
a) Rotture di componenti o giunzioni a) Rotture di componenti o giunzioniSeat load
N
SI NO SI
Stabilità
NO
2.000 530 10 x 10 s No defects b) Allentamenti di giunzioni b) Nessun componente rigido è allentato Rotture di componenti o giunzioni
2.000 530 1 x 30 min No defects c) No elemento strutturale importante notevolm. def. c) Funzioni inalterate dopo rimoz. carichi Rotture di componenti strutturali
Note:
Numberof cycles
d) Funzioni inalterate dopo rimoz. carichi
Remarks
d) stabilità Allentamenti di giunzioni
According to EN 1728:2012, back force has been reduced from 560 N to 530 N to avoid tipping. Deformazioni o rotture che pregiudicano utilizzo campione
Apparecchiatura ApparecchiaturaSeat front edge static load, clause 6.5
Danni su movimeto di parti meccanicheEN 581-2 EN 12727 Funzioni inalterate dopo rimoz. carichi
Seat loadN Rotture di componenti o giunzioni Rotture di componenti o giunzioni Apparecchiatura
x
x1.300 10 No defects Allentamenti di giunzioni x Allentamenti di giunzioni
Funzioni inalterate dopo rimoz. carichiNote:
Funzioni inalterateRispetto requisiti EN 581-1 x Rispetto requisiti EN 12727, punto 5.1 e 5.2
The test has been carried out according to table 2 of EN 581-2:2015, contract level. Stabilità x
ApparecchiaturaApparecchiatura 1827
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
245844 / 4Date received: 05/02/18Date of test: 13/02/18Date of issue: 16/02/18Sample name: Chair EOS
Seat and back fatigue test EN 1728:2012+AC:2013
SAVAS PLASTIK SAN. VE. TIC. A.S.BEYSAN SAN. SIT. BIRLIK CAD. NO: 18-BEY.34524 ISTANBULTR - TURKEY
Tests, certification and research
CATAS S.p.A. via Antica, 24/3 33048 San Giovanni al Natisone (UD) +39 0432 747211 - [email protected] www.catas.com
Testing site: via Braide Matte, 4 33048 San Giovanni al Natisone (UD) tel. +39 0432 747211 [email protected]
Seat and back fatigue test, clause 6.17
Back forceN
Numberof cycles Remarks
EN 16139
1945
SI NO
EN 12520
SI NOTest results: a) Rotture di componenti o giunzioni a) Rotture di componenti o giunzioni
SI NO SI NO
b) Allentamenti di giunzioni
Seat forceN
b) Nessun componente rigido è allentato
c) No elemento strutturale importante notevolm. def. c) Funzioni inalterate dopo rimoz. carichi1.000 333 50.000 No defects d) Funzioni inalterate dopo rimoz. carichi d) stabilità
Note:Apparecchiatura ApparecchiaturaEN 581-2 EN 12727
The test has been carried out according to table 2 of EN 581-2:2015, contract level.Rotture di componenti o giunzioni Rotture di componenti o giunzionix
x
Allentamenti di giunzioni x Allentamenti di giunzioniFunzioni inalterate dopo rimoz. carichi x Funzioni inalterateRispetto requisiti EN 581-1 x Rispetto requisiti EN 12727, punto 5.1 e 5.2Stabilità
ApparecchiaturaApparecchiatura
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
245844 / 5Date received: 05/02/18Date of test: 16/02/18Date of issue: 16/02/18Sample name: Chair EOS
Leg forward static load test EN 1728:2012+AC:2013
SAVAS PLASTIK SAN. VE. TIC. A.S.BEYSAN SAN. SIT. BIRLIK CAD. NO: 18-BEY.34524 ISTANBULTR - TURKEY
Tests, certification and research
CATAS S.p.A. via Antica, 24/3 33048 San Giovanni al Natisone (UD) +39 0432 747211 - [email protected] www.catas.com
Testing site: via Braide Matte, 4 33048 San Giovanni al Natisone (UD) tel. +39 0432 747211 [email protected]
Leg forward static load test clause 6.15
Balancingseat force
NNumberof cycles Remarks
EN 16139
SI NO
EN 12520
SI NOIKEA IOS-PRF-0040 SI NO
Test results:a) Rotture di componenti o giunzioni a) Rotture di componenti o giunzioni
Stabilità
SI NO
Rotture di componenti o giunzionib) Allentamenti di giunzioni b) Nessun componente rigido è allentato Rotture di componenti strutturalic) No elemento strutturale importante notevolm. def.
Forwardhorizontal force
N
c) Funzioni inalterate dopo rimoz. carichi Allentamenti di giunzioni
d) Funzioni inalterate dopo rimoz. carichi d) stabilità Deformazioni o rotture che pregiudicano utilizzo campione400 1.000 10 No defects Danni su movimeto di parti meccaniche
Apparecchiatura Apparecchiatura
Note:
Funzioni inalterate dopo rimoz. carichiEN 581-2
ApparecchiaturaRotture di componenti o giunzioniThe test has been carried out according to table 2 of EN 581-2:2015, contract level.
x
xAllentamenti di giunzioni xFunzioni inalterate dopo rimoz. carichi x
Rispetto requisiti EN 581-1x
Stabilità
Apparecchiatura
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
245844 / 6Date received: 05/02/18Date of test: 16/02/18Date of issue: 16/02/18Sample name: Chair EOS
Leg sideways static load test EN 1728:2012+AC:2013
SAVAS PLASTIK SAN. VE. TIC. A.S.BEYSAN SAN. SIT. BIRLIK CAD. NO: 18-BEY.34524 ISTANBULTR - TURKEY
Tests, certification and research
CATAS S.p.A. via Antica, 24/3 33048 San Giovanni al Natisone (UD) +39 0432 747211 - [email protected] www.catas.com
Testing site: via Braide Matte, 4 33048 San Giovanni al Natisone (UD) tel. +39 0432 747211 [email protected]
Leg sideways static load test clause 6.16
Balancingseat force
NNumberof cycles Remarks
EN 16139
SI NO
EN 12520
SI NOIKEA IOS-PRF-0040 SI NO
Test results:a) Rotture di componenti o giunzioni a) Rotture di componenti o giunzioni
Stabilità
SI NO
Rotture di componenti o giunzionib) Allentamenti di giunzioni b) Nessun componente rigido è allentato Rotture di componenti strutturalic) No elemento strutturale importante notevolm. def.
Sidewayshorizontal force
N
c) Funzioni inalterate dopo rimoz. carichi Allentamenti di giunzioni
d) Funzioni inalterate dopo rimoz. carichi d) stabilità Deformazioni o rotture che pregiudicano utilizzo campione300 1.000 10 No defects Danni su movimeto di parti meccaniche
Apparecchiatura Apparecchiatura
Note:
Funzioni inalterate dopo rimoz. carichiEN 581-2
ApparecchiaturaRotture di componenti o giunzioniThe test has been carried out according to table 2 of EN 581-2:2015, contract level.
x
xAllentamenti di giunzioni xFunzioni inalterate dopo rimoz. carichi x
Rispetto requisiti EN 581-1x
Stabilità
Apparecchiatura
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
245844 / 7Date received: 05/02/18Date of test: 16/02/18Date of issue: 16/02/18Sample name: Chair EOS
Seat impact test EN 1728:2012+AC:2013
SAVAS PLASTIK SAN. VE. TIC. A.S.BEYSAN SAN. SIT. BIRLIK CAD. NO: 18-BEY.34524 ISTANBULTR - TURKEY
Tests, certification and research
CATAS S.p.A. via Antica, 24/3 33048 San Giovanni al Natisone (UD) +39 0432 747211 - [email protected] www.catas.com
Testing site: via Braide Matte, 4 33048 San Giovanni al Natisone (UD) tel. +39 0432 747211 [email protected]
Seat impact test clause 6.24
Heightof drop
mmNumberof drops Remarks
EN 16139
SI NO
EN 12520
SI NO
IKEA IOS-PRF-0040 SI NOStabilità
Test results:a) Rotture di componenti o giunzioni a) Rotture di componenti o giunzioni
Rotture di componenti o giunzioni
SI NO SI
Rotture di componenti strutturali
NO
b) Allentamenti di giunzioni b) Nessun componente rigido è allentato Allentamenti di giunzionic) No elemento strutturale importante notevolm. def.
Mass ofimpactor
kg
c) Funzioni inalterate dopo rimoz. carichi Deformazioni o rotture che pregiudicano utilizzo campione
d) Funzioni inalterate dopo rimoz. carichi d) stabilità Danni su movimeto di parti meccaniche25 240 10 No defects Funzioni inalterate dopo rimoz. carichi
Apparecchiatura Apparecchiatura
Note:ApparecchiaturaEN 581-2 EN 12727
Rotture di componenti o giunzioni Rotture di componenti o giunzioniThe test has been carried out according to table 2 of EN 581-2:2015, contract level.
x
xAllentamenti di giunzioni x Allentamenti di giunzioniFunzioni inalterate dopo rimoz. carichi x Funzioni inalterateRispetto requisiti EN 581-1 x Rispetto requisiti EN 12727, punto 5.1 e 5.2Stabilità
ApparecchiaturaApparecchiatura
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon