Sales product catalog 2015-2016 - Water Weights · Sales Product Catalog ... lifting equipment. ... Water Weights have, in line with Lifting Equipment Engineering Association (LEEA)

Water Weights Europe

Sales product catalog

2015-2016

Load & Force Measurement

®WATER WEIGHTS Standard water filled proof load bags Page 4® WATER WEIGHTS Lifeboat & Gangway Testing Bags Page 5® WATER WEIGHTS Platform, Bridge & Floor Testing Page 6® WATER WEIGHTS safety facts Page 7

LE Load Link Series (load cells 5t-300t) Page 10

SL Load Measuring Shackle (load cells 12t-1000t) Page 11

GL112 Telemetry Load Display Page 12

Accessories - Transport Cases Page 13

Accessories - Shackles Page 13

Accessories - Spare Parts Page 13

Custom Systems Page 14

Other Information

Water Weights General Terms & conditions Page 16

Contact & Route to Water Weights Europe Page 17

Water Weights Europe BV, Leeghwaterstraat 23A, 3364 AE Sliedrecht, The Netherlands - Tel. +31(0)184 430 190 Fax. +31(0)184 421 900 www.waterweights.nl

Page 02

Sales Product Catalog - Contents

®WATER WEIGHTS Bags / Test Weights

Page 04

Technical data

Type Capacity Size when empty Length Size when filled (metric tonne) (packed: lxbxh) (empty) (Dia x Height) (empty)

BS 01 S 1.0 70 50 40 240 120 x 230 23 kgBS 02 S 2.0 70 50 40 370 160 x 350 45 kgBS 02 L 2.0 70 50 40 250 170 x 210 45 kgBS 03 S 3.0 100 50 40 430 190 x 400 65 kgBS 03 L 3.0 100 50 40 300 190 x 220 65 kgBS 05 S 5.0 110 70 70 490 200 x 460 95 kgBS 05 L 5.0 110 70 70 340 270 x 250 95 kgBS 10 S 10.0 110 80 80 610 250 x 580 135 kgBS 12 L 12.0 120 80 80 460 300 x 410 140 kg

5BS 12 L 12.5 120 80 80 480 320 x 430 150 kgBS 15 L 15.0 120 100 100 570 260 x 520 165 kgBS 20 S 20.0 130 100 100 620 350 x 580 230 kgBS 25 S 25.0 140 110 110 660 380 x 610 240 kg

BS 35 S 35.0 160 120 120 760 420 x 700 340 kg

BS 55 S 55.0 140 110 110 930 460 x 850 450 kg

Weight

®WATER WEIGHTS water filled proof load bags are a well

proven method for testing cranes, beams, davits or any

lifting equipment. They are used for marine as well as

industrial and engineering applications.® Fifteen standard types of WATER WEIGHTS proof load bags between 1 and 55

metric tonnes are avaiable in our standard range. Combining different

capacities and specially designed spreaders, any load can be applied.

Specialist "low headroom" bags (marked with “L“ in the table below) are

available for testing where headroom is restricted. These bags are designed for

use of only one bag at each lifting point.

Standard shaped bags (marked with “S“ in the table below) have the shape of a

rain drop, which is the most natural shape for a flexible water container. This

specific shape makes combinations of three bags from a single point possible.

®Branding: WATER WEIGHTS

Skin material: PVC coated, Woven Polyester Fibre

Tensile strength: 8300-9800 N/50mm

Tear resistance: 1500 N

Skin thickness: 1650 GSM

Bursting pressure: 355 PSI

Safety factor: NEL Certified 6:1 (55t 4:1)

Proof loaded: All bags 2:1

Filling connection: On Request


Note: If bags are

filled to less than

their capacity they

will increase in

length and reduce

in diameter.

35

s

20

s10

s5L

0,0

Height in Meters

1,0

2,0

3,0

4,0

5,0

6,0

7,0

2,01,00,01,02,0

Radius in Meters

2L

5s2

s

1s

512 L

12L

15L

25

s

512 L

8,0

9,0

55

s

3L3L

Sales Product Catalo g - ®WATER WEIGHTS Bags / Test Weights

®WATER WEIGHTS Standard Proof Load Bags

Technical data

These specially designed Life boat testing bags of 100kg or 375kg each can be

supplied as a complete life boat/gangway testing set. A remote system with a

manifold and filling hoses, allows proof load testing to be conducted safely,

without entering the craft in the ‘dangerous’ overload situation.

Larger gangways and small bridges can be tested with our 1 tonne WATER ®WEIGHTS Matress bags (MB1000). These bags offer much flexibility by their

shape, and higher capacities can be achieved.


Material: PVC coated Polyester Fibre

Material thickness: 1650 GSM

Weight Tolerance: ±2% of filled weight

Coupling: Standard 1´´ Camlock F

Extras: Pressure relief valve, anchor tabs

Note: Above are the standard sizes. Other shapes and capacities are available

on request. Bags can be purchased as a complete kit including accessories, or

as single units.

Page 05

®WATER WEIGHTS

apply an evenly distributed load to a lifeboat, gangway,

or any other object that has to be proof loaded.

lifeboat testing bags can be used to


Type Size when empty Size when filled (packed set: lxbxh) (length x width x height) (each empty) (each)

LB100 120 x 100 x 120 110 x 28 6 kg 100 kgLB375 120 x 100 x 120 250 x 44 10 kg 375 kg

MB1000 120 x 100 x 120 300 x 130 x 30 kg 1000 kg

Weight Capacity

21


®WATER WEIGHTS Lifeboat & Gangway Test Bags

Page 06

Technical data

Type Size when empty Size when filled (packed: lxbxh) (Length x Width x Height) (empty)

MB1000 1 t. 50 x 40 x 40 300 x 130 x 30* 22 kgFT 5000 5 t. 75 x 80 x 80 250 x 250 x 95* 20 kgFT 8000 8 t. 100 x 80 x 80 300 x 280 x 90* 40 kgFT16 16 t. 120 x 90 x 90 800 x 200 x 100* 50 kgFD25 25 t. 150 x 90 x 90 415 x 415 x 250 55 kgFD35 35 t. 150 x 100 x 100 560 x 150 60 kgFD100 100 t. 280 x 130 x 100 840 x 840 x 180 330 kg

Capacity Weight

Water Weights provide specialist products and services

for load testing of all kinds of structures, platforms,

bridges, floors, gangways, loading ramps and decks.

Note:

totally enclosed bags (Matress bags

or Flexitainers, MB, FT), other bags

are open top Flexidams (FD).

Note: Many other versions, shapes

or sizes are available on request.

Please contact us for possibilities.

Bags marked with * are our

Easy handling and positioning on site and low carriage costs are some of the

advantages of this testing system. As gradual application of the test load can

more easily be achieved with water weights than solid weights. The amount of

water inside the bags is measured with a calibrated flow track meter.

Water Weights have tested several RO-RO ferry ramps, arranged ballasting

arrangements for ships, tested floors during building renovations and tested

several elevator systems and bridges.


Skin material: PVC coated, Woven Polyester Fibre

Tensile strength: 8300-9800 N/50mm

Tear resistance: 1500 N

Skin thickness: 1650 GSM

Bursting pressure: 355 PSI

Filling connection: On Request

MB 10000,0

Height in Meters

1,0

2,0

3,0

5,0

4,0

3,0

2,0

1,0

0,0

Length

in M

ete

rs

8,0

7,0

6,0

FT5000

FT8000

FT16

FD100

FD35

FD25



®WATER WEIGHTS Platform, Bridge & Floor Testing

®WATER WEIGHTS Safety Facts

Page 07



1. In the majority of countries proof load testing of lifting equipment is a

mandatory requirement. Such requirements are legal minimums and many

companies or industries choose to set more rigorous standards.

2. Proof load testing is an essential part of any inspection, repair and

maintenance programme for lifting equipment. In situations where live load

testing is not specifically mandated, it is still an essential element of safe

maintenance and advisable for liability purposes.

3. Successful proof load testing instills confidence in customer, operator and

owner.

® 4. The use of WATER WEIGHTS water filled proof load bags for load testing all

kinds of lifting equipment is recognised world-wide as a safe, efficient and cost

effective system.

® 5. WATER WEIGHTS water filled proof load bags have been specifically

designed and physically proof load tested to verify that their operational

integrity exceeds UK Health and Safety Executive Standards.

6. Water Weights have, in line with Lifting Equipment Engineering Association

(LEEA) Guidance Document 051, a physical load test programme. All

equipment has a proven and certified factor of safety in excess of 6:1 and each

bag is physically proof load tested to a minimum of twice its rated capacity.

7. Gradual application of load under test conditions is essential. This is ®more easily achieved using WATER WEIGHTS water filled proof load

bags than traditional solid weights.

8. In the event of failure of the equipment under test, consequential

loss or damage is usually limited and often prevented when using ®WATER WEIGHTS water filled proof load bags.

9. There have been several serious accidents throughout the world

during proof load testing involving sub-standard water containers

which were simply not designed for the physical demands of proof

load testing. Water Weights strongly advise potential users of 'water

containers' to request evidence of physical proof load test certificates

from a recognised Government body or testing authority, proving

that the equipment meets with the minimum factor of safety legally

required.

®10. WATER WEIGHTS water filled proof load bags fully meet the

essential safety requirement of the European Machinery Directive

and are fully certified in accordance with LEEA Guidance Document

051 and the America Bureau of Shipping (ABS) Product Design

Assessment. Water Weights is approved toISO 9001:2008.

Sales Product Catalog - Load & Force measurement

LE Load Link Series

The Water Weights LE series use microprocessor based electronics, providing

excellent power management to ensure maximum battery life. Load cell will

switch from active to eco mode (standard one-third of the sample speed) if no

changes in load are detected to save battery power. Specific algorithms within

the LE software and advanced measurement filtering ensure best linearity.

Configuration and calibration can be performed by your supplier.

The LE load link is standard available as a radio telemetry version, however a

cabled version is available on request. The load link will come as a set together

with the GL112 handheld telemetry display (see page 13 of our sales product

catalog). Link ID selection allow multiple load cells within the same area.

The LE load link series is the base model within our load

cell range. A range from 5 up to 300 metric tonne is

available.

A

B

D

C

E

Technical Details

Safety factor 5:1

Proof loaded 150%

Max. overload 150%

Ultimate overload 300%

Enclosure / IP rating IP66

Material Aluminium

Accuracy 0,5%

Sample rate (active) 1 Hz (0,25Hz - 8Hz on request)

Sample rate (eco) 0,3 Hz (0,08Hz - 3Hz on request)

Transmitter range > 150 mtr

Battery life (active) > 200 hrs (20°C)

Battery life (eco) > 500 hrs (20°C)

Battery type (<50t) 1x AA

Battery type (>50t) 2x AA

Temp Range -10°C / +70°C

Transmitter Freq. 434 MHz

Optional on request IP67, IP68, ATEX

Stainless Steel body

C-type batteries

Custom Frequency

Capacity Model A B C D E Weight

5 ton LE05TA 108 105 41 30 164 1.4 kg12 ton LE12TA 120 105 41 38 210 2.0 kg17 ton LE17TA 131 125 58 53 255 4.0 kg25 ton LE25TA 131 125 58 53 255 4.0 kg35 ton LE35TA 147 158 58 60 305 5.0 kg50 ton LE50TA 170 150 78 73 345 8.5 kg85 ton LE85TA 190 186 100 85 410 16 kg100 ton LE100TA 228 220 120 100 455 27 kg120 ton LE120TA 228 220 120 100 480 28 kg150 ton LE150TA 255 260 125 115 555 43 kg200 ton LE200TA 292 285 165 135 680 60 kg250 ton LE250TA 330 304 190 145 680 87 kg

300 ton LE300TA 370 350 190 155 750 110 kg


Page 10


SL Load Measuring Shackle

The Water Weights SL telemetry load shackles are based on a standard bow

shackle, with a load measuring system built into its pin. The design and body is

ultra-rugged, ensuring exceptional protection from mechanical damage. The

system uses the LE microprocessor electronics and LE software, (previous

page) providing excellent power management and advanced linearity control.

Configuration / calibration can be performed by your supplier.

The SL load shackles are standard available as radio telemetry units, however a

cabled version is available on request. The load link will come as a set together

with the GL112 handheld telemetry display (see page 13 of our sales product

catalog). Link ID selection allow multiple load cells within the same area.

This type of load cell provide a robust and flexible

solution for load measuring. Capacities from 12t up to

and over 1000t could be achieved.

Technical Details

Safety factor 5:1

Proof loaded 150%

Max. overload 150%

Ultimate overload 300%


Material High tensile steel

Accuracy 0,5%

Sample rate (active) 1 Hz (0,25Hz - 8Hz on request)

Sample rate (eco) 0,3 Hz (0,08Hz - 3Hz on request)

Transmitter range > 150 mtr

Battery life (active) > 200 hrs (20°C)

Battery life (eco) > 500 hrs (20°C)

Battery type 1x AA, 2x AA, 2xC, 2x D

(depending on capacity)


Transmitter Freq. 434 MHz


Stainless Steel body

Custom Frequency

Custom design

Capacity Model A B C D Weight

12 ton SL12TA 51 35 100 32 8 kg17 ton SL17TA 60 42 132 38 13 kg25 ton SL25TA 73 51 187 127 20 kg35 ton SL35TA 83 57 197 146 29 kg50 ton SL50TA 105 70 267 184 51 kg85 ton SL85TA 127 83 330 200 76 kg120 ton SL120TA 133 95 372 229 130 kg150 ton SL150TA 140 108 368 254 163 kg200 ton SL200TA 175 130 500 290 250 kg250 ton SL250TA 200 140 540 305 305 kg

300t - 1000t or bigger? Dimensions and details on request

If you want an existing shackle conversion? Ask for possibilities.

A

B

D

C


Page 11


GL112 telemetry load display

The Water Weights GL112 display is an easy to use, lightweight radio telemetry

display. The unit will operate with any LE-based measuring system and

provides live readout, battery indication for both the load cell and the display,

tare functionality and measurement unit selection.

Link ID selection allow use of multiple load cells within the same area, as well as

using one display for multiple devices (not simultaneously). As all calibration is

set in the load cell, choosing another load cell would not affect the readout.

Optional is a signal output connection (either RS232 serial or analog) allowing

you to monitor, record or analyse the loadcell readout in your own system,

laptop, PC or printer.

The small handheld GL112 digital telemetry load display

comes with all LE and SL load measuring devices. Its size

and weight makes it comfortable to operate.

Technical Details

Dimensions 150 x 85 x 28 mm

Weight 280 gramme


Display 8 digit LCD

Digit type Alphanumeric, 9 mm

Units Metric ton, US ton, LBS

Keypad 6 keys tactile

Receiver Freq. 434 MHz

Receiver range > 150 mtr


Battery type 2x AA

Recommended Batt. Rechargable NiMH

Battery life > 50 hrs (20°C)

Charging time < 10 hrs (depending on Battery type)

Comes with All LE and SL telemetry systems

Included accessories Protection case

External Antenna

Power supply / charger

Data output cable (RS232 only)


Custom Frequency

Serial RS232 output

Analog voltage output

Portable data logger

RS232 Printer


Page 12


Accessories - Transport Cases


For transport and storage of the load measuring equipment we recommend to

use our heavy duty transport cases. These cases are made of ultra-high impact

ABS and are shock, dust and (partly) water proof. The cases are supplied with

soft foam insert (for light weight apparatus) or padded dividers (heavy

equipment). Accessories like document pouches are also available.

Type Inside (mm) Outside (mm) Example what it can store (no guarantee)

3000 329 x 233 x 152 364 x 295 x 169 GL112 display, antenna detached, charger, A5 documents.

T45 400 x 260 x 98 440 x 325 x 115 GL112 display, antenna attached, charger, A4 documents.

5000 432 x 301 x 170 468 x 365 x 188 LE05-LE25 load link, GL112, charger, A4 documents.

6000 473 x 351 x 196 510 x 419 x 215 LE05-LE12 load link, GL112, charger, A4 docs & pair of shackles.

LE25-LE85 load link, GL112, charger, A4 documents.

SL12-SL25 load shackle, GL112, charger, A4 documents.

6700 534 x 357 x 225 609 x 428 x 263 LE17-LE35 load link, GL112, charger, A4 docs & pair of shackles.

(this is a trolley case with telescopic handle) LE85-LE150 load link,GL112, charger, A4 documents.

SL25 -SL35 load shackle, GL112, charger, A4 documents.

All kinds of heavier equipment and accessories.

Accessories - Shackles

However you are free to use your own shackles, Water Weights can supply the

full range of green pin shackles (or other brands if required) to be used with

your load cell, or in an advanced water bag rigging.

Please contact our office and ask for possibilities.

Accessories - Spare Parts

In case some of the parts get lost or damaged over

time, we can supply spare parts for the load

measuring units. Below is a list of the most common

parts, but more are available on request.

1. LE Battery caps

2. LE telemetry antenna

3. GL telemetry antenna

4. GL protective cover

5. GL charger

6. RS232 cable

1 2 3

4 5 6

Page 13

Custom Systems

Water Weights does supply systems to all industries: Offshore, Construction,

Cranes, Oil & Gas, Marine & many more. A wide variety of load monitoring

systems is available. Here below is a brief overview of possible products.

- Custom load pins

- Compression load cell systems (1)

- Tension load sensors

- Running line tension meters (2)

- Cable speed & payout monitoring

- Jack-up measuring systems

- Load monitoring instruments (3)

- Handheld and integrated load monitoring

- LCD, LED and full color displays

- Data logging systems

- RS232 serial data devices

- Multiple sensors on single display

- Center of gravity (CoG) measurement

-Other custom weighing systems (4)

Don’t hesitate to ask for possibilities. We are willing to discuss and select the

best solution for your project.

A wide range of other load measurement & data

processing systems can be supplied, specially designed

to your requirements.



1

3

2

D

D

Page 14

4

Sales Product Catalog - Other Information

General Terms and ConditionsArticle 1: General Provisions 1. These general conditions shall apply to all offers made by us and/or to

us, to all agreements concluded with us, including the execution thereof, and to all other contracts with us, without any exclusions. With these conditions the application of any general conditions applied by the lessee, under whatever name, shall be expressly rejected.

2. Any departures from the conditions below can only be accepted when concluded in writing and shall only apply after our express acknowledgement in writing to the lessee.

Article 2: Definitions 1. a. Lessor: Water Weights Europe B.V;

b. Lessee: The legal and/or natural person hiring the ‘installation’ , including representatives; c. Installation: The installation, machine, requisites, and parts, which Water Weights Europe B.V . hires to the lessor; d.A week shall consist of seven consecutive days.

Article 3: Good condition 1. By signing the delivery receipt the lessee shall declare to have received

the hired installation in good condition, and that the installation displays no signs of damages.

Article 4: Application of the installation 1. The lessee shall use the installation expertly and for the intended

purpose for which the installation is equipped, and in accordance with any applicable laws, regulations, provisions, etc.

2. The lessee shall not be allowed to alienate the object, nor pawn or encumber it, nor to hire, let or otherwise put it at someone else’s disposal for money or for free, or to pass the rights and duties ensuing from this agreement to third parties.

3.

The lessee shall not move the installation or have it moved outside the location known to the lessor without the lessor’s written consent.

4.

The lessee shall not modify the installation or add to it, nor have it modified or expanded.

5. The lessor shall have the right to transfer the installation and this agreement to a third party designated by the lessor .

Article 5: Repairs and Maintenance 1.

The lessee shall be obliged to clean the installation regularly and to keep it in good condition.

2.

Cleaning and maintenance costs shall be borne by the lessee, subject to the provisions of article 9 paragraph 4.

Article 6: Liability and Indemnity 1. The lessee shall be liable for any damages, incidental and accidental to

the installation, irrespective of whether these are caused by fault of the lessee or third parties, or by force majeure.

2.

In the course of the term of hire the lessee shall bear all risks of the installation. The lessor shall not be liable for any faults or unfitness of the installation, any defects within or of the installation or any direct or consequential damages caused by the installation or by any shortcomings of the installation.

3.

The lessor shall indemnify the lessor against any claims from third parties with respect to damages resulting from any faults or unfitness of the installation, any defects or shortcomings within or of the installation.

Article 7: Insurance Payments or Payments of Damages 1.

The lessee shall at their own costs insure and keep insured the risks pertaining to the installation and he shall do so on an all-risks policy on extensive terms.

2.

Any claim which the lessee may receive on account of damages to and/or caused by the installation to third parties shall be pledged by the lessee, when necessary in advance, by signing the agreement with the lessor , just as the lessor shall accept this pledge by signing the contract. On his own account the lessee shall provide the lessor with all data concerning any claim(s) and he will co-operate to formalise this pledge without any reservations by signing a so-called pledge bond. The lessee shall also authorize the lessor to perform everything necessary in order to achieve this pledge. The insurance payment that the lessor will receive shall be used in the first place to pay for any repairs and other expenses to be paid by the lessor and ensuing from or caused by the incident, while the remainder of the payments shall be deducted from the amount the lessor still may claim from the lessee with respect to this agreement. If the insurance company has deducted a sum from the reimbursement on account of the owner’s risk or the lessee’s liability , the lessor shall charge the sum of this deduction to the lessee’s account.

3.

The lessee shall be liable towards the lessor for the full replacement value of any part lost or stolen and for the full repair costs. Full lease instalments shall remain due for as long as the installation has not yet been fully repaired.

Article 8: Terms of hire 1. The installation shall be deemed to have been hired from the time the

installation leaves the lessor’s premises until the time it is returned and unloaded.

2. Hire ‘cancellation’ by telephone shall be confirmed by the attribution of an ‘off-hire’ number (end of hire). Following this, the lessee shall confirm in writing when the object may be picked up.

3. The sole fact that the installation for whatever reason and by whatever cause cannot be used, shall not affect the lessee’s obligation to pay, subject to the provisions of article 9 paragraph 4.

4. The lessor shall not be liable for any delay in the delivery. The dates provided by him in this must be considered ‘approximate’ dates.

Article 9: Defects 1.

The lessee shall inform the lessor at once in case of loss or damages to the installation.

2. When the installation has been hired without an operator appointed by the lessor , the lessee shall immediately inform the lessor by fax or by telegram of any defect or malfunctioning of any part of the installation.

3. Any rights – in the form of lower rent - for the period of time that the installation is defect, as provided for in the next paragraph, can only be considered as from the date and time the fax or telegram was sent.

4. The time necessary for repairs to and/or replacement of the installation shall be deducted from the rent, provided the defect is caused by normal wear , this to be decided by the lessor , and through no fault of the lessee. In that case the lessor shall bear the costs of the replacement, but he shall not be liable for any consequential damages suffered or to be suffered by the lessee as a result of the defect (stagnation damages etc.).

5. If necessary, a test certificate shall be provided with every shipment.

Article 10: Payments 1. Payments should be made weekly . 2.

The lessee shall never have the right to make cuts on or crediting to the payments.

3. When any payment is overdue the lessee shall owe the lessor an interest of 1.5 per cent per month for the payments still due starting from the date due up to and including the date of the payment. In case of delays of payments the lessor will first deduct payments made by the lessee from costs and interest due, and then assigned to the oldest term due, and so forth. The lessor also has the right – in case the lessee is in default – to raise the amount due with collection charges, legal costs and other recovery costs, including the expenses of the lessor’s solicitor and other extrajudicial costs.

4.

The lessor’s accounts shall serve as full evidence with respect to the amount due to the lessor by the lessee, subject to counter-evidence from the lessee.

Article 11: Technical Inspection 1.

At the request of the lessor the lessee shall have the installation available for inspection or give the lessor the opportunity to inspect the installation and/or take it back. The lessee shall authorize the lessor or the persons appointed by the latter to enter the installation site.

2.

If the lessee does not meet the obligation as referred to in article 5, the lessor shall have the right – without prejudice to any right ensuing from this agreement – to reclaim the installation and to enter (or authorize someone to enter) the installation site. The lessee shall be accountable for all expenses the lessor will have in connection with the reclamation of the installation, including its transport and the costs of any overdue maintenance.

Article 12: Attachment and Third Party Measures 1.

In case third parties claim any rights or exert any measures with respect to the installation, the lessee shall immediately inform them of the property rights of the lessor .

2.

The lessor shall be allowed take all measures considered necessary by him in order to protect his rights – also in the name of the lessee. The costs of these measures shall be borne by the lessee, unless the lessor is accountable for the occasion of the measures.

Article 13: Test 1.

If the installation is used to perform a test, this shall be under the sole responsibility and liability of the lessee. The lessee shall be liable for all persons assigned by the lessor to start up and/or operate the installation or hired as such by the lessee. The lessor shall never be liable in such a case for damages ensuing from actions or negligence of these persons.

Article 14: Final Provisions 1.

The provisions of this contract shall be governed by the laws of the Netherlands exclusively . Any disputes shall be settled by the competent court of the city in which the lessor is situated, on the understanding that the lessor has the right without the above condition to put the dispute to a judge who is competent to learn from the dispute.

Page 16


Sales Product Catalog - Other Information

Page 17


Contact information

Postal address:

Leeghwaterstraat 23A, 3364 AE Sliedrecht, The Netherlands

Visiting / Collecting Goods:

The entrance of our office is located in the Vierlinghstraat.

Tel: +31 (0) 184 430 190

Fax: +31 (0) 184 421 900

Email: [email protected]

Web: www.waterweights.nl

VATno: NL804452611B01

CoC/KvK: 23080856

From Rotterdam:

Take A15 direction Gorinchem/Nijmegen

· On highway A15 take exit 24 (Sliedrecht-West)

· At the end of the exit, turn left

· At the traffic lights turn left (under highway

viaduct)

· Follow the road for approx. 2 km and than

turn right (Enter industrial estate,

Calandstraat)

· Immediately (60m) turn right (Lelystraat)

· After approx. 100m turn left (Vierlinghstraat)

· The entrance to our office/warehouse can be

found in the Vierlinghstraat.

Route to Water Weights

From Utrecht:

Take A27 to Gorinchem and than A15 dir. Rotterdam

· On highway A15 take exit 24 (Sliedrecht-West)

· At the end of the exit, turn right

· Follow the road for approx. 2 km and than

turn right (Enter industrial estate,

Calandstraat)

· Immediately (60m) turn right (Lelystraat)

· After approx. 100m turn left (Vierlinghstraat)

· The entrance to our office/warehouse can be

found in the Vierlinghstraat.

Documents

Sales product catalog 2015-2016 - Water Weights · Sales Product Catalog ... lifting equipment. ... Water Weights have, in line with Lifting Equipment Engineering Association (LEEA)