Lifting Devices Catalog 2015

7/23/2019 Lifting Devices Catalog 2015

1/36

LD-2015

LiftingDevices

PRODUCTS FOR BETTER LIFTING


2/36

2

Lifting Beams

Economical

Adjustable Spreader/Lifting Beam

(ASLB16) ............................................. 4

Adjustable Lifting Beam (ALB17) .............. 4

Fixed Spread Lifting Beam (FSLB19) ....... 5

Basket Sling Lifting Beam (BSLB18) ........ 5

Industrial

Low Headroom Multiple Spread

Lifting Beam (LHLB20) .................... 6, 7

Heavy Duty Twin Basket Sling Lifting

Beam (HDLB22) .................................. 8Twin Hoist Lifting Beam (THLB25) ........... 9

Spreader

Fixed Spreader Beam (FSB30) ............... 10

Adjustable Spreader Beam (ASB32) .......11

Modular Spreader Beam (MSB14) .......... 12

Coil Lifter

Dixon Coil Hook with Pivoting

Wedge (DCH80) .....................................13

. Heavy Duty Coil Hook (HDCH82) ..............13

Construction Tools

Beam/Girder Clamps

Beam Flange Clamp (BFC) .....................14

Beam Grab (F) ........................................15

Pipe & Manhole Lifting

Pipe Grab (C/S) ...................................... 16

Pipe Tongs (PTL) ....................................17

Concrete Manhole Lifter (MHL) .............. 18

Manhole Sleeve Lifter (MCL).................. 19 Tea Cup Pipe Carrier (TC)...................... 20

Tea Cup Sling (TCS) .............................. 20

Pipe Pick (CPP)...................................... 21

Barrier Grab (BLG) ................................. 22

TABLE OF CONTENTS

Fork Lift Accessories

Booms

Fixed Fork Lift Booms (FFLB) ........................ 23

Single Fork Hook (SFH) ................................. 23

Telescoping Fork Lift Booms (TFLB) .............. 24

Double Fork Beam (DFB) ............................... 24

Pivoting Fork Lift Booms (PFLB) .................... 25

Specialty Products

Fiberglass Battery Lifting Beam (BLB) ............. 26

Battery Lifting Beam, Low Headroom

(BLBLHA) ...................................................... 27

Adjust-A-Link .................................................... 28

Adjust-A-Leg ..................................................... 29

Gantry Cranes

Fixed Steel (H90)........................................30, 31

Adjustable Steel (K90) ................................ 32, 33

Fixed Aluminum (HA90).................................... 34

Adjustable Aluminum (KA90) ............................ 35


3/36

3

Quality Engineered Products

All of the products in this catalog have been

engineered and produced to the highest quality

standards and meet or exceed all applicable U.S.

government standards including OSHA and

ASME B30.20 AND B30.9. Random proof testing

is standard. Proof testing with certication is

available upon request for a nominal charge.

Product Overview

Lifting Beams

PRODUCT INFORMATION

Allow for multiple pick points of

the load for balance or support

issues. Spreader Beamshave

a top rigging that add stability to

the lift. Available in 9 standard

styles.

Beam/Girder Clamps

For use in lifting and positioning

structural beams. Two styles

may also be hung from load

bearing beams to suspend

hoists or other lifting devices.

Coil Lifters

Use to lift, manipulate and

reposition coils. Requiresminimum aisle space equal to

Lifter arm length. Available in 2

standard styles.

Gantry CranesThese portable cranes allow for

the pick up and transport of a

load wherever you have a

smooth and level oor. Available

in either steel or aluminum, xed

or adjustable height.

Pipe & Manhole Lifting

For the lifting and positioning

of steel, iron and concrete pipes.Pipe Grabs are for metal pipes.

Pipe Picks and Tea Cups for

concrete pipes.

Barrier Grabs

Scissor style grab is the easy

way to lift and move concrete

road barriers. Auto-latch for

hands-off operation.

Forklift Accessories

Three styles of booms and

two hook devices provide

added lifting capabilities to

your forklift trucks.

Battery Beamsprovide a non-

conductive lifting method for

industrial batteries. (i.e.-forklift

batteries)

Adjust-A-Legslings allow

controlled lifting of loads where

lift points are not equidistant

from the loads center of gravity.

Specialty Products


4/36

4

FEATURES

Use for 2, 3 or 4 point lifting or

as spreader beam (add top rigging) Adjustable lifting points

Good for unbalanced loads

Low headroom

Shackles included

6" spread adjustments

4" bail adjustments

OPTIONS

Pair of swivel hooks - Code S*

Top chain rigging - Code C

FEATURES Adjust bail for unbalanced load

6" spread adjustments

Shackles included

OPTIONS

Pair of swivel hooks - Code S*

ECONOMICAL LIFTING BEAMS

Adjustable Spreader/Lifting Beam (ASLB16)

Rated

Cap.(Tons) Part No.*

Spread (Ft.)Bail

Adj.(In.)

Bolt Style Anchor

Shackles (Tons)

Headroom(In.) Weight(Lbs.)Max. Min. Top Bottom

1/4 ASLB.5 4 1 16 1 1/2 1 1/2 7.1 37

1/2 ASLB1 6 3 24 1 1/2 1 1/2 9.9 76

1 ASLB2 6 3 24 1 1/2 1 1/2 9.9 76

2 ASLB4 6 3 24 3 1/4 2 12.6 128

4 ASLB8 8 4 32 4 3/4 4 3/4 16.6 270

5 ASLB10 10 5 40 6 1/2 4 3/4 20.2 445

7 ASLB14 12 6 48 8 1/2 6 1/2 23.8 755

Rated

Cap.

(Tons) Part No.*

Spread (Ft.)

Bail Adj.

(In.)

Bail

Dimensions

ABCT

(In.)

Headroom

(In.)

Weight

(Lbs.)Max. Min. Range D

1 1/4 ALB2.5 6 3 24 3 1.535.63 14.7 150

2 ALB4 6 3 24 3 1.535.63 14.7 155

4 ALB8 8 4.5 36 3 247.75 19.8 285

* For Optional Swivel Hooks, add an S to part No. Contact Lift-All for added cost.

Adjustable Lifting Beam (ALB17)

Bail Adjustment for

Unbalanced Loads

Lift Point Adjustment

for Load Length

Bail Adj.

Headroom

Spread Min.

Spread Max.


5/36

5

ECONOMICAL LIFTING BEAMS

FEATURES

Fixed spread lifting

Eye hooks with latches

Sealed construction for cleaner beam

Fixed Spread Lifting Beam

(FSLB19)

Basket Sling Lifting Beam

(BSLB18)

FEATURES

Best beam for low headroom applications

Fixed spread lifting

Bent bar hooks allow for 2" wide sling eyes

- One set for 3' & 4' spreads

- Two sets for 6' - 12' spreads

Spread 2 is 1/2 of Spread 1

Rated

Cap.

(Tons) Part No.

Spread

(Ft.)

Bail

Dimensions

ABCH

(In.)

Headroom

(In.)

Weight

(Lbs.)

1/2

FSLB1x4

FSLB1x6

FSLB1x8

FSLB1x10

4

6

8

10

A .75

B 3.0

C 5.0

H .89

13 1/4

13 1/4

13 1/4

14 1/4

39

53

64

95

1

FSLB2x4

FSLB2x6FSLB2x8

FSLB2x10

4

68

10

A 1.0

B3.0C 5.0

H .89

13 1/4

14 1/415 1/4

15 1/4

40

75100

117

2

FSLB4x4

FSLB4x6

FSLB4x8

FSLB4x10

4

6

8

10

A 1.0

B 3.0

C 5.0

H 1.0

16 3/4

17 3/4

19 3/4

19 3/4

45

89

114

138

3

FSLB6x4

FSLB6x6

FSLB6x8

FSLB6x10

4

6

8

10

A 1.5

B 4.0

C 7.0

H 1.0

21

23

23

23

78

138

173

284

Rated

Cap.

(Tons) Part No.

Spread

(Ft.)

Bail

Dimensions

ABCT

(In.)

Headroom

(In.)

Weight

(Lbs.)

1/2

BSLB1x3

BSLB1x4

BSLB1x6

BSLB1x8

BSLB1x10

BSLB1x12

3

4

6

8

10

12

A .88

B 3.0

C 5.0

T .75

8 1/2

8 1/2

8 1/2

8 1/2

8 1/2

9 1/2

40

48

78

95

113

171

1

BSLB2x3

BSLB2x4

BSLB2x6

BSLB2x8

BSLB2x10

BSLB2x12

3

4

6

8

10

12

A .88

B 3.0

C 5.0

T .75

8 1/2

8 1/2

9 1/2

10 1/2

10 1/2

11 1/2

40

48

93

136

175

239

2

BSLB4x3

BSLB4x4

BSLB4x6BSLB4x8

BSLB4x10

BSLB4x12

3

4

68

10

12

A .88

B3.0C 5.0

T .75

9 1/2

10 1/2

10 1/211 1/2

12 1/2

13 1/2

52

75

139169

246

326

5

BSLB10x3

BSLB10x4

BSLB10x6

BSLB10x8

BSLB10x10

BSLB10x12

3

4

6

8

10

12

A 2.0

B 4.0

C 7.0

T 1.25

13 1/2

14 1/2

15 1/2

16 1/2

17 1/2

19 1/2

104

135

211

310

423

618


6/36

6

FEATURES

Great for low headroom

applications

Swivel hooks with latches

standard

3' & 4' beams have 2 spreads

6' & longer beams have 3 spreads

(Inner spread lengths are shorter

than outer spreads by 1' increments

Additional or repositioned holes

available

INDUSTRIAL LIFTING BEAMS

Low Headroom Multiple Spread Lifting Beam (LHLB20)

Rated

Cap.

(Tons) Part No.

Spread

(Ft.)

Bail

Dimensions

ABCTH

(In.)

Headroom

(In.)

Weight

(Lbs.)

1/2

LHLB1x3

LHLB1x4

LHLB1x6

LHLB1x8

LHLB1x10

LHLB1x12

LHLB1x14LHLB1x16

LHLB1x18

LHLB1x20

LHLB1x24

LHLB1x30

3

4

6

8

10

12

1416

18

20

24

30

A .88

B 3.0

C5.0T .75

H .88

12 3/4

12 3/4

12 3/4

12 3/4

13 3/4

13 3/4

14 3/415 3/4

16 3/4

16 3/4

20 1/4

22 1/4

40

50

65

95

140

160

230305

400

450

830

1340

1

LHLB2x3

LHLB2x4

LHLB2x6

LHLB2x8

LHLB2x10

LHLB2x12

LHLB2x14

LHLB2x16

LHLB2x18

LHLB2x20

LHLB2x24

3

4

6

8

10

12

14

16

18

20

24

A .88

B 3.0

C 5.0

T .75

H .88

12 3/4

12 3/4

13 3/4

13 3/4

14 3/4

15 3/4

16 3/4

18 1/2

20 1/4

20 1/4

22 1/4

40

50

85

115

165

230

320

415

605

675

1095

2

LHLB4x3

LHLB4x4

LHLB4x6

LHLB4x8

LHLB4x10

LHLB4x12

LHLB4x14

LHLB4x16

LHLB4x18

LHLB4x20

LHLB4x24

3

4

6

8

10

12

14

16

18

20

24

A .88

B 3.0

C 5.0

T .75

H .88

13 3/4

13 3/4

14 3/4

16 1/2

17 1/2

18 1/4

20 1/4

20 1/4

24 3/4

24 3/4

27 3/4

50

65

100

165

230

315

480

540

800

900

1730


7/36

7

Extra Holes

Allows for extra

hook positions in

addition to thestandard holes.

Specify number

and spread.

Low Headroom Multiple Spread Lifting Beam (Continued)

Rated

Cap.

(Tons) Part No.

Spread

(Ft.)

Bail

Dimensions

ABCTH

(In.)

Headroom

(In.)

Weight

(Lbs.)

3

LHLB6x3

LHLB6x4

LHLB6x6

LHLB6x8LHLB6x10

LHLB6x12

LHLB6x14

LHLB6x16

LHLB6x18

LHLB6x20

LHLB6x24

3

4

6

810

12

14

16

18

20

24

A 1.25B 3.0

C 5.0

T 1.0

H 1.0

15 1/4

15 1/4

16 1/4

17 1/418 1/4

22 1/2

24 1/2

24 1/2

27 1/2

27 1/2

27 1/2

70

80

140

200275

415

650

730

1295

1450

1765

5

LHLB10x3

LHLB10x4

LHLB10x6

LHLB10x8

LHLB10x10

LHLB10x12

LHLB10x14

LHLB10x16

LHLB10x18

LHLB10x20

LHLB10x24

3

4

6

8

10

12

14

16

18

20

24

A 2.0

B 4.0

C 7.0

T 1.25

H 1.94

19 1/2

20 1/2

21 1/2

25 1/2

25 1/2

27 1/2

27 1/2

30 1/4

30 1/4

30 1/4

33 1/4

115

145

205

325

390

580

690

1210

1340

1505

2275

7 1/2

LHLB15x3

LHLB15x4

LHLB15x6

LHLB15x8

LHLB15x10

LHLB15x12

LHLB15x14

LBLH15x16

LBLH15x18

3

4

6

8

10

12

14

16

18

A 2.0

B 4.0

C 7.0

T 1.25

H 1.5

22 1/2

23 1/2

25 1/4

27 1/4

27 1/4

30 1/4

30 1/4

30 1/4

33

135

170

265

415

500

910

1070

1600

1665

10

LHLB20x3

LHLB20x4

LHLB20x6

LHLB20x8

LHLB20x10

LHLB20x12

LHLB20x14

LBLH20x16

LBLH20x18

3

4

6

8

10

12

14

16

18

A 2.0

B 4.0

C 7.0

T 1.25

H 1.56

23 1/4

25 1/4

27 1/4

27 1/4

30 1/4

30 1/4

30 1/4

33

33

150

205

335

420

775

910

1075

1500

1670

Options:

Extra Hooks

Allows for multiple

pick points.

Saves time from

having to move

hooks.

FasPinsAllows for easy

repositioning of

hooks.

Recommended

for frequent hookposition changes.


8/36

8

FEATURES

For use with slings in a basket hitch

Latch hooks designed to minimize

sling eye damage

Four fixed hooks are standard for 3

and 4 lengths.

Eight fixed hooks are standard

for all lengths over 4'

Inner spread is 1/2 of outer spread

Extra spreads available upon request


Heavy Duty Twin Basket Sling Lifting Beam (HDLB22)

Rated

Cap.

(Tons) Part No.

Spread

(Ft.)

Bail / Hook

Dimensions

ABCTH

(In.)

Headroom

(In.)

Weight

(Lbs.)

1/2

HDLB1x3

HDLB1x4

HDLB1x6

HDLB1x8

HDLB1x10

HDLB1x12

3

4

6

8

10

12

A .88

B 3.0

C 5.0

T .75

H 1.06

8 1/2

8 1/2

8 1/2

8 1/2

9 1/2

9 1/2

50

65

110

150

200

220

1

HDLB2x3

HDLB2x4

HDLB2x6

HDLB2x8HDLB2x10

HDLB2x12

3

4

6

810

12

A .88

B 3.0

C 5.0

T .75H 1.12

8 1/2

8 1/2

9 1/2

10 1/210 1/2

11 1/2

50

65

145

210230

290

2

HDLB4x3

HDLB4x4

HDLB4x6

HDLB4x8

HDLB4x10

HDLB4x12

3

4

6

8

10

12

A .88

B 3.0

C 5.0

T .75

H 1.12

9 1/2

10 1/2

10 1/2

11 1/2

12 1/2

13 1/2

70

90

160

225

300

375

5

HDLB10x3

HDLB10x4

HDLB10x6

HDLB10x8

HDLB10x10

HDLB10x12

3

4

6

8

10

12

A 2.0

B 4.0

C 7.0

T 1.0

H 1.12

13 1/2

14 1/2

15 1/2

16 1/2

16 1/2

16 1/2

90

160

275

350

450

500

7 1/2

HDLB15x3

HDLB15x4

HDLB15x6

HDLB15x8

HDLB15x10

HDLB15x12

3

4

6

8

10

12

A 2.0

B 4.0

C 7.0

T 1.25

H 1.75

14 1/2

15 1/2

16 1/2

17 1/2

17 1/2

19 1/2

155

180

330

410

500

700

10

HDLB20x3

HDLB20x4

HDLB20x6

HDLB20x8

HDLB20x10

HDLB20x12

3

4

6

8

10

12

A 2.0

B 4.0

C 7.0

T 1.25

H 1.75

15 1/2

16 1/2

17 1/2

19 1/2

19 1/2

19 1/2

150

200

360

500

850

1000

Eight hook version

shown


9/36

9

Rated

Cap.

(Tons) Part No.

Spread

(Ft.)

Bail / Hook

Dimensions

ABCTH

(In.)

Headroom

(In.)

Weight

(Lbs.)

2

THLB4x6

THLB4x8

THLB4x10

THLB4x12

THLB4x14

THLB4x16

6

8

10

12

14

16

A 1.5

B 3.0

C 5.0

T .63

H 1.12

16 3/4

16 3/4

17 3/4

17 3/4

18 3/4

18 3/4

125

160

240

280

360

400

4

THLB8x6

THLB8x8

THLB8x10

THLB8x12

THLB8x14

THLB8x16

6

8

10

12

14

16

A 1.5

B 3.0

C 5.0

T .63

H 1.5

20

21

22

23

23

25

160

240

310

410

500

725

6

THLB12x6

THLB12x8

THLB12x10

THLB12X12

THLB12x14

THLB12x16

6

8

10

12

14

16

A 1.5

B 3.0

C 5.0

T .75

H 2.06

27 1/2

28 1/2

28 1/2

30 1/2

30 1/2

30 1/2

220

300

380

550

640

780

10

THLB20x6

THLB20x8

THLB20x10THLB20x12

THLB20x14

THLB20x16

6

8

1012

14

16

A 2.0

B 4.0

C 7.0T 1.0

H 2.25

29

29

3232

32

32

340

420

800920

1100

1220

15

THLB30x8

THLB30x10

THLB30x12

THLB30x14

THLB30x16

8

10

12

14

16

A 2.0

B 4.0

C 7.0

T 1.25

H 2.25

38 1/4

38 1/4

38 1/4

41 1/4

41 1/4

740

865

1050

1930

2158

20

THLB40x8

THLB40x10

THLB40x12

THLB40x14

THLB40x16

8

10

12

14

16

A 2.0

B 4.0

C 7.0

T 1.25

H 3.0

35 1/2

38 1/2

38 1/2

38 1/2

38 1/2

830

1130

1266

1926

2196

FEATURES

For use with two hoists to increase lift

capacity

Swivel hook with latch standard

Twin Hoist Lifting Beam (THLB25)


Center hook offset to accommodate

hoists of unequal capacities.Custom pick points for both top

and bottom.

Center bail and extra pair of

hooks for maximum versatility.


10/36

10

FEATURES

Adds stability to lift where headroom

is not limited

Chain rigging standard, wire rope

rigging available

Fixed Spreader Beam (FSB30)

SPREADER BEAMS

* Add a "W" for Wire Rope RIgging

Add an "A" for Adjust-A-Link Rigging

Rated

Cap.

(Tons) Part No.*

Spread

(Ft.)

Bail / Hook

Dimensions

ABCH

(In.)

Headroom

(In.)

Weight (Lbs.)

With

Chain

With

Wire

Rope

2

FSB4x4

FSB4x6

FSB4x8FSB4x10

4

6

810

A .5

B 2.5C 5.0

H .97

34

46

5870

55

72

96111

59

75

98112

FSB4x12

FSB4x16

FSB4x20

FSB4x24

12

16

20

24

82

106

132

156

133

283

474

519

133

265

450

486

5

FSB10x4

FSB10x6

FSB10x8

FSB10x10

4

6

8

10

A 1.0

B 3.5

C 7.0

H 1.06

37

49

61

73

115

135

161

182

134

153

178

198

FSB10x12

FSB10x16

FSB10x20

FSB10x24

12

16

20

24

83

110

134

158

237

407

551

791

251

394

534

761

10

FSB20x4FSB20x6

FSB20x8

FSB20x10

46

8

10

A 1.25

B 4.38

C 8.75

H 1.5

4153

64

77

188222

266

302

231258

297

327

FSB20x12

FSB20x16

FSB20x20

FSB20x24

12

16

20

24

86

113

138

163

371

533

706

1110

391

543

705

1098


11/36

11

Rated

Cap.

(Tons) Part No.*

Spread

(Ft.)

Bail / Hook

Dimensions

ABCH

(In.)

Headroom

(In.)

Weight (Lbs.)

With

Chain

With

Wire

Rope

2ASB4x4-6ASB4x6-10

ASB4x8-14

ASB4x12-20

4 to 66 to 10

8 to 14

12 to 20

A .5B 2.36

C 3.94

H .97

48/5772/88

96/113

132/166

7998

192

268

8198

190

263

5ASB10x4-6

ASB10x6-10

ASB10x8-14

ASB10x12-20

4 to 6

6 to 10

8 to 14

12 to 20

A 1.0

B 3.94

C 7.09

H 1.41

55/64

79/95

102/126

138/172

139

207

266

752

144

205

257

727

10ASB20x4-6

ASB20x6-10

ASB20x8-14

ASB20x12-20

4 to 6

6 to 10

8 to 14

12 to 20

A 1.25

B 5.51

C 10.63

H 1.78

60/69

74/111

108/132

144/163

179

244

548

798

175

265

559

793

15

ASB30x4-6

ASB30x6-10

ASB30x8-14

ASB30x12-20

4 to 6

6 to 10

8 to 14

12 to 20

A 1.5

B 5.25

C 10.5

H 2.22

64/72

87/104

111/135

147/180

243

476

623

894

324

541

671

913

SPREADER BEAMS

Adjustable Spreader Beam (ASB32)

FEATURES

Great versatility and stability where headroom is

not limited

Chain rigging standard, wire rope rigging

available

Telescoping spread adjusts in 1 in. increments

* Add a "W" for Wire Rope Rigging

Headroom

Spread

B

AC

H


12/36

12

Rated

Cap.(Tons) Part No.

Spread

(Ft.)Min/Max

at Min.Spread

at Max.Spread A B C

Hook

OpeningWith Latch

Wt.(Lbs.)

1 MSB2 10/22 135.6 150.7 0.5 2.5 5 0.97 195

2 MSB4 10/22 135.6 150.7 0.75 3 6 0.97 275

Spreader Part No. For Spreader Lengths Rigging Part No.

MSB210' - 16'

16' - 22'

DO-EN30 x 11'6"

DO-EN30 x 16'

MSB410' - 16'

16' - 22'

DO-EN60 x 11'6"

DO-EN60 x 16'

SPREADER BEAMS

Modular Spreader Beam (MSB14)

FEATURES Designed to accommodate spreads from

10' to 22'

Capacities in 1 and 2 tons

Lightweight

Faspin with lanyard allows for quick adjustment of

spread in 1' increments

Hair pin cotter to rigging attachment

Designed and manufactured to ASME

standards

Recommended Optional Top Rigging (Add "R" to Part Number)

2 Sets of 2-Leg Tuex Roundslings per Beam

Outer Tube

Inner Tube - each system contains (2) Short TubeLifting Eye Dimensions


13/36

13

COIL LIFTERS

Dixon Coil Hook with Pivoting Wedge (DCH80)

Heavy Duty Coil Hook (HDCH82)

FEATURES

For easy upending of coils from horizontal to vertical

Pivoting wedge great for lifting coils that have been stacked

Wedge also acts as a coil retainer

Excels in use with small, lightweight coils

Good for limited overhead clearance

Standard handle for easier coil positioning

Rated

Cap.

(Tons) Part No.

Max.

Coil

Width

(In.)

Max.

Radial

(In.)

Min.

ID (In.)

Bail Dimensions

(In.)

Wt.

(Lbs.)A B C T

1/2 DCH1x6 6 13 9 .81 2 3.3 .5 20

1/2 DCH1x12 12 13 13 .81 2 3.3 .5 281 DCH2x8 8 16 10 .81 2 3.3 .5 23

2 DCH4x10 10 18 12 1/2 1 2.6 4 .75 42

3 1/2 DCH7x12 12 20 14 1/2 1.875 3.6 5.3 1 80

FEATURES

Designed for heavy duty applications

High tensile alloy steel plate reduces physical size and weight

Counter balanced to hang level when empty

Inside radius on hooks avoid coil edge contact

Guide handles for ease of hook positioning Handles a wide range of coil widths

Available with optional padding for additional coil protection

Rated

Cap.

(Tons) Part No.

Coil

Width

(In.)

Max/Min Throat

HR

Headroom

Bail Dimensions (In.)

Wt.

(Lbs.)A B C T

5

HDCH10x36 36/24 24 37-3/8 1-1/2 4 7 1-1/4 420

HDCH10x48 48/30 24 38 1-1/2 4 7 1-1/4 584

HDCH10x60 60/36 24 38-1/2 1-1/2 4 7 1-1/4 680

7-1/2

HDCH15x36 36/24 24 37-1/2 1-1/2 4 7 1-1/2 615

HDCH15x48 48/30 24 38-1/4 1-1/2 4 7 1-1/2 774

HDCH15x60 60/36 24 39 1-1/2 4 7 1-1/2 942

10

HDCH20x48 48/30 24 41-1/4 2 5 9 1-3/4 928

HDCH20x60 60/36 24 41-3/8 2 5 9 1-3/4 1295

HDCH20x72 72/42 24 42-1/2 2 5 9 1-3/4 1616

15

HDCH30x48 48/30 30 47-7/8 2 5 9 1-3/4 1450

HDCH30x60 60/36 30 48 2 5 9 1-3/4 1824

HDCH30x72 72/42 30 48-3/4 2 5 9 1-3/4 2227

20HDCH40x60 60/36 30 52-1/8 2-1/4 6 12 2 2175

HDCH40x72 72/42 30 52-5/16 2-1/4 6 12 2 2625

Throat

Coil Width

Headroom


14/36

14

CONSTRUCTION TOOLS

Model

Number

Rated

Capacity

(lbs.)

Dimensions (inches)

Weight.

(Lbs.)

D HR Headroom (in.)

F GH

J A B C TMin. Max. @ Man. D @ Mix. D

BFC1 2200 3.00 7.50 12.25 3.00 9.25 0.88 2.10 0.75 2.00 2.00 0.63 3 5 8

BFC2 4400 3.00 7.50 12.25 3.00 9.25 0.88 2.10 0.75 2.00 2.00 0.63 3 5 6

BFC3 6600 6.00 12.00 19.75 4.25 11.00 1.25 2.38 1.00 2.50 2.50 1.00 4.5 7.5 19

BFC5 11000 6.00 12.00 19.75 4.25 11.00 1.25 2.38 1.00 2.50 2.50 1.00 4.5 7.5 22

BFC10 22000 6.00 13.25 22.50 6.00 14.63 1.75 4.65 1.38 3.75 6.25 1.25 7.5 10.25 50

Beam Flange Clamps (BFC)Great for the lifting of or suspensionfrom I-Beams

FEATURES:

Rated load capacities from 1 to 10 metric tons.

Proof test with certificate.

Lightweight and portable design.

Left-hand thread and right-hand thread screw spindle

allows for rapid clamping and unclamping.

Lock nut prevents inadvertent loosening of clamp.

Jaw opening adjusts to a wide range of beam types

and f ange widths.

Use only for vertical loading.

Built-in suspension pin provides lower headroom.

Powder coated finish.

Available with Large Bail option for oversized hoist hooks.

5:1 design factor meets portions of ASME B30.16.

Complies with ASME B30.20 and BTH-1 standard.

OPTION LB

Large Bail

Applications

Allows for the capability

of hanging hoists or

rigging from an overhead

load bearing structure.

For lifting and positioning

structural beams. Can be used

in pairs in conjuction with a

spreader beam for additional

versatility.

Option LB

DiameterE

Max.

SPECIFICATIONS

NOTE: Weights are for clamp only.Option LB - Large Bail

G

H

J

HR

D F

T B

C

A

E


15/36

15

FEATURES

Heavy duty design for lifting wide flange beams and

plate girders

Recessed base accepts studs in beam surface

Eliminates need for slings, chokers and spreader bars

CONSTRUCTION TOOLS

Rated

Cap.

(Tons)

Part

No.

Unit

Height

(H) (In.)

Flange

Width (W)

(In.)

Flange

Thickness (T)

(In.)Wt.

(Lbs.)Min. Max. Min. Max.

5 F5 22.7

4 4 1/4 1/4

685 5 1/4 3/8

6 10 1/4 1

15 F15 30.1

7 7 1/2 3/4

182

8 8 1/2 1

9 9 1/2 1 1/4

10 10 1/2 1 1/2

11 17 1/4 2

25 F25 44.816 17 1 1/4 3

54118 24 1 3

35 F35 52.9

16 18 2.25 4

841

20 22 2 4

24 24 1.75 4

26 26 1.75 4

28 36 1 4

Beam Grab (F)(For vertical lifting only, not suspension)

Operation:

1. Lower grab onto beam.

2. Lift arms, if necessary, to slide under beam flange.

3. As beam is lifted, pressure forces arms together to secure beam.

4. The heavier the beam, the greater the clamping force.

W

T

H


16/36

16

FEATURES

Automatically clamps to pipe when lowered onto it

Moveable outriggers stabilize the pipe during lift

No blocking required

Quick and efficient handling of properly balanced pipe

CONSTRUCTION TOOLS

Pipe Grab (C OR S)

(For cast iron or steel pipe only)

Operation:

1. Lower grab onto approximate center of pipe. Grab will open

and seat on pipe.

2. Lift slowly to check for pipe balance. Never exceed a 15 angle.

3. If angle exceeds 15, lower pipe and reposition grab.

Rated

Cap.

(Lbs.)

Cast Iron Steel

Height

(H) (In.)

Width

(W) (In.)

Depth

(D) (In.)

Shackle Dim.

(In.)

Dia.BC

Wt.

(Lbs.)

Part

No.

Pipe

OD

(In.)

Part

No.

Pipe

OD

(In.)

450 C3 4.0 S3 3.5 10 5 6 .381.031.44 7

600 C4 4.8 S4 4.5 14 8 7 .441.161.69 9

1000 C6 6.9 S6 6.63 17 11 11 .51.311.88 15

1400 C8 9.05 S8 8.63 22 13 14 .51.311.88 25


17/36

17

FEATURES

Pipe Tongs are made of sturdy construction to

handle pipe, round bars, castings, etc

Tongs are provided with bare steel curved

gripping arms

Optional replaceable urethane pads available

to protect smooth or polished surfaces

Load must be balanced and controlled when lifting

May be used in pairs with a lifting beam for added

stability

CONSTRUCTION TOOLS

Pipe Tongs (PTL)

(For vertical lifting only, not suspension)

Decreasing the load by bumping or substantial imbalance can, under certain circumstances loosen the grip.

Do not use in diameters other than those specified on nameplate.

Rated

Cap.

(Lbs.) Part No.

Dia.

(In.)

Headroom

(In.)

Min.

A

(In.)

B

(In.)

Wt.

(Lbs.)

1000 PTLF5 5 15 - 1/2 0.5 1.31 17

2000 PTLF8 8 23 - 1/2 0.5 1.31 25

Rated

Cap.

(Lbs) Part No.

Bare Steel

Range

Min/Max

(In.)

Urethane Pad

Range

Min/Max (In.)

HR Headroom

Min.-Max. (In.)

Pad

Width

(In.)

A

(In.)

B

(In.)

Wt.

(Lbs.)

1000 PTLA4 2-4 1.25-3.25 11.21-15.15 2.25 0.5 1.31 8

2000 PTLA8 4-8 3.25-7.25 19.18-26.49 5 0.5 1.31 29

2000 PTLA12 7-12 6.25-11.25 25.95-35.81 6 0.5 1.31 49

2000 PTLA15 10-15 9.25-14.25 30.03-38.67 6 0.5 1.31 77

Specifcations - Fixed Diameter

Specifcations - Adjustable Diameter

WARNING

FixedAdjustable


18/36

18

FEATURES

Designed for 4"-6" concrete wall

thickness

Will not damage concrete seat

Legs can be quickly positioned to

balance load

2 and 3 leg models available

Conforms to ASME B30.9 &

B30.20

Note: Constant tension required to

maintain positive load contact.

CONSTRUCTION TOOLS

Concrete Manhole Housing Lifter (MHL)

Rated

Cap.

(Lbs.) Part No. Description

Max.

Dia.

Wt.

(Lbs.)

10,000 MHL5 2 Leg Model (42" each) 92.5 131

15,000 MHL7 1/2 3 Leg Model (2@42", 1@72") 101 181

5,000 MHLC Clamp Only - 45

2 Leg Model3 Leg Model


19/36

19

TWO LEG LIFTERS THREE LEG LIFTERS

FEATURES

Easy to attach and release from sleeve

The quick and easy way to place cast

manhole sleeves

2 or 3 leg models available

Manhole Sleeve Lifter (MCL)

Rated

Cap.

(Lbs.) Part No. Description

Wt.

(Lbs.)

1,000 MCL1/2 2 Leg Model 24

1,500 MCL3/4 3 Leg Model (2@18", 1@30") 26

Note: Flange diameter range 12"-30".

CONSTRUCTION TOOLS


20/36

20

FEATURES

Efficiently handles concrete water and sewer pipes

Three sizes available to lift up to 18 tons

Standard hand grip for ease of installation

Optional spoon handle available to assist Tea Cup

placement (Model TC66 only) in small diameter pipes

CONSTRUCTION TOOLS

Tea Cup Pipe Carrier (TC)

Rated

Cap.

(Tons) Part No.

Sling

Dia.

(In.)

For

Use

With:

Wt.

(Lbs.)

4.9 TCS34 3/4TC66

9

6.6 TCS78 7/8 14

8.5 TCS1 1

TC130

19

10 TCS118 1 1/8 26

13 TCS114 1 1/4 33

18 TCS112 1 1/2 TC180 52

Tea Cup Sling(TCS)

For use with Tea Cup Carriers

5 ft. standard length

OPERATION1. Drop TCS Sling

down through hole

in pipe

2. Align and insert

Tea Cup Pipe

Carrier onto sling

3. Lift pipe

Model TC66

Rated

Cap.

(Tons)

Part

No.

Dimensions (In.)

Wt.

(Lbs.)A B C D E F G

6.6 TC66 5 9/16 2 2 1/8 1 1/8 4 3/4 1 3/4 1 1/8 9

13 TC130 6 2 1/2 2 5/8 1 3/8 5 3/4 1 3/4 1 3/8 12

18 TC180 8 3 3 1/4 1 5/8 7 5/8 2 3/4 1 5/8 22

Tea Cup Spoon

Handle (TCSH)

(Includes Bolt-on Lip)


21/36

21

FEATURES

Simple and fast No need to reach inside the pipe

Worker remains above the pipe at all times

Use to easily join length of pipe

CONSTRUCTION TOOLS

Pipe Pick (PP)(For concrete pipe only)

Rated

Cap.

(Lbs.)

Part

No.

Min. Pipe

ID

(In.)

Dimensions (In.)

Wt.

(Lbs.)A B C T D E F G

3,000 CPP1.5 12 .62 1.62 2.37 .62 1.5 23 10.75 16.25 10

6,000 CPP3 14 .75 1.93 2.93 .75 1.75 27.62 12 20 18

10,000 CPP5 16 1 2.75 3 1 2.25 43.5 13 36 38

Tilt handle for easy positioning

Lift arm counter-weighted

for easy removal


22/36

22

PRODUCT FEATURES AND BENEFITS:

New, compact & rugged design holds up to the

work environment where barriers are used.

Handles concrete barriers from 6 12 nominal

width at the top of barrier.

Stainless steel Auto-Latch.

Auto-Latch mounting insures proper alignment.

Locating assembly orientates tong on barrier

without operator intervention and will pivot

when grab is set on the ground.

Gripping pads pivot to conform with the load.

Replaceable polyurethane pads protect barrier.

Alloy steel dog-point pads bite into painted barrier

surfaces (typical in coastal areas).

Centering guide cut out on grab shoe helps

to properly center tong over barrier for a level lift.

Extended handles on each side keep operator

away from load and can be adjusted as needed.

Lifting eye allows for easy hook attachment,

self-centers rigging, and will accommodate a fork.

CONSTRUCTION TOOLS

Rated

Cap.

(Lbs.) Part No. Wt. (Lbs.)

With Polyurethane Lifting Pads

8,500 BLG-4 602

14,500 BLG-7 652

With Steel "Dog Point" Lifting Pads

8,500 BLG-4-DP 602

14,500 BLG-7-DP 652

SPECIFICATIONS

OperationPlace tong on barrier, lower

crane completely to

disengage the Auto-Latch.

Lift and position barrier in

desired location.

Lower crane, line must go

slack to engage Auto-Latch, lift

tong off barrier and repeat!

Barrier Lifting Grab (BLG-1)


23/36

23

FEATURES

Easy attachment - no tools required

Welded construction for durability

Promotes versatility of fork lift trucks

3,000 lb. rated capacity

FEATURES

Fixed length beam design

Restraining chain with grab hook

FORK LIFT ACCESSORIESFixed Fork Lift Booms (FFLB)

Note: Fixed hook shown, swivel hook also available.

FFLB-15 Single Pick Point

Use with 1" or 2" wide web sling

Optional swivel hook available

FFLB-40 Multiple Pick Points

5 alternate hook positions at 1 foot intervals

Fixed or swivel hooks available

Single Fork Hook (SFH)

Part No.

Max.

Cap.

(Lbs.)

Headroom

(In.)

Maximum Capacity at Hook Position (Lbs.)

Wt.

(Lbs.)4' 5' 6' 7' 8'

FFLB-15 1500 7 - - - - 1,500 185

FFLB-40 4000 6.3 4,000 3,500 3,000 2,500 2,000 200

Fixed

Hook

Part No.

Swivel

Hook

Part No.

Dimensions (In.)

Wt.

(Lbs.)A B C (Fixed) C (Swivel) D E

SFHF4 SFHS4 4 1/2 2 1/2 4 11/16 6 9/16 1 1 7

SFHF5 SFHS5 5 1/2 2 1/2 4 11/16 6 9/16 1 1 8

SFHF6 SFHS6 6 1/2 2 1/2 4 11/16 6 9/16 1 1 9


24/36

24

FEATURES

Telescoping boom for versatility

T-Pin locks boom into position

Handle on end for easy

extension of boom

Swivel hooks with latch are

standard

Restraining chain with grab

hook standard

12 ft. maximum horizontal reach

FORK LIFT ACCESSORIESTelescoping Fork Lift Booms (TFLB)

FEATURES

Easy attachment - no tools

required

Welded construction for

durability

Promotes versatility of fork

lift trucks

Part No.

Maximum Capacity at Hook Position (Lbs.)Wt.

(Lbs.)3'-6' 7' 8' 9' 10' 11' 12'

TFLB30 3,000 3,000 2,600 2,200 1,900 1,600 1,500 340

TFLB40 4,000 3,200 2,600 2,200 1,900 1,600 1,500 340

TFLB60 6,000 5,000 4,200 3,500 3,000 2,700 2,500 390

TFLB80 8,000 7,000 5,700 4,800 4,100 3,600 3,100 520

Fixed

Hook

Part No.

Swivel

Hook

Part No.

Rated

Capacity

(Lbs.)

Dimensions (In.)

A C D

F F

(Fixed) E(Swivel) O

Wt.

(Lbs.)

DFBF4 DFBS4 4,000 20 31/4 9 1/8 71/4 8 7/8 11/8 1 5/32 21

DFBF10 DFBS10 10,000 24 31/4 10 3/4 91/4 117/16 1 13/16 1 11/16 42

Double Fork Beams (DFB)

Note: Swivel hook shown, fixed hook also available.


25/36

25

FEATURES

Vertical adjustability in 5

increments up to 40, 6' 4"

maximum height

Telescoping boom for versability

T-Pin locks boom into position

Handle on end for easy

extension of boom

Swivel hooks with latch are

standard

Restraining chain with grab

hook standard reach

FORK LIFT ACCESSORIES

Pivoting Fork Lift Booms (PFLB)

Part No.

Maximum Capacity at Hook Position (Lbs.)Wt.

(Lbs.)3'-6' 7' 8' 9' 10' 11' 12'PFLB30 3,000 3,000 2,600 2,200 1,900 1,600 1,500 350

PFLB40 4,000 3,200 2,600 2,200 1,900 1,600 1,500 350

PFLB60 6,000 5,000 4,200 3,500 3,000 2,700 2,500 420

PFLB80 8,000 7,000 5,700 4,800 4,100 3,600 3,100 540


26/36

26

FEATURES

Non-conductive for lifting industrial size fork lift or

similar batteries

Up to 70% lighter than other beams

Available for single or multiple size batteries

Heavy duty capacities of 4,800 lbs. and 7,000 lbs.

Acid resistant coated polyester straps and hooks

36" standard spread - custom lengths available

Swivel hooks standard

SPECIALTY BEAMS

Fiberglass Battery Lifting Beam (BLB)

Rated

Cap.

(Lbs.)

Part

No.*

Oblong Size

(in.)

Dia. BC

Headroom

(in.)

Wt.

(Lbs.)

4,800 BLB48A .6336 39 17

7,000 BLB70A .752.755.5 40 1/2 20

Fixed Length (BLBF)

Adjustable (BLBA)

Optional J Hooks

Available in place of swivel hooks

Note: Maximum spread range is 12"

* Add a "J" to Part No. for Optional J Hooks

Rated

Cap.

(Lbs.)

Part

No.*

Oblong Size

(in.)

Dia. BC

Headroom

(in.)

Wt.

(Lbs.)

4,800 BLB48F .6336 29 16

7,000 BLB70F .752.755.5 30 20


27/36

27

FEATURES

Low Headroom, 18.3"

Adjustable to handle batteries of different lengths

Non-conductive beam

Acid-resistant, coated polyester straps with either

swivel or J-hook

SPECIALTY BEAMS

Battery Lifting Beam (BLBLHA)

Low Headroom, Adjustable

Rated

Capacity

(Lbs.) Part No.

Standard

Spread

(In.)

Wt.

(Lbs.)

7,000 BLBLHA 45 110

Swivel HooksStandard

J Hooks Available


28/36

28

FEATURES

Chain cannot be removed from the master control plate, assuring

the capacity rating will not be compromised

Alloy steel master control plate for strength and reliability

Each assembly serialized for traceability

Complies with OSHA - proof tested and certified

Grade 100 chain provides approximately 25% higher capacities

than our previousAdjust-A-Links- replaces larger, more

expensive slings

New angled plate design reduces bending torque on chain and

plate - reduces wear and extends sling life

Wider top bearing surface reduces wear to both plate andcrane hook

Versatile - one sling does many jobs

Using twoAdjust-A-Links on the same crane hook eliminates

the need for expensive triples and quads

Heat treated alloy steel construction for long sling life

Yellow powder coating on master plate and hooks prevents rust

extends sling life

More compact plate design fits larger hooks for easier rigging

Less bulky than typical double adjustable chain slings

High visibility yellow fittings make assembly easy to spot

Easily adjustable to accommodate a wide range of applications

No time wasted searching for just the right sling

SPECIALTY SLINGSAdjust-A-Link

The adjustable, two leg chain sling

Chain

Size

(In.)

1Rated Capacity *

(Lbs.)

Dimensions

(in.) 6 Ft. Length 10 Ft. Length 14 Ft. Length

Single

@ 90

Double

@ 60

Eye

Width

A

Eye

Height

B

Overall

Width

C

Overall

Length

D

Hook

Opening

E

Part

No. (Lbs.)

Part

No. (Lbs.)

Part

No. (Lbs.)

7/32 2,700 4,700 2 3/16 2 11/16 3 15/16 5 1/8 15/16 30001G10 4.2 30002G10 6.2

9/32 4,300 7,400 2 7/8 3 3/16 5 1/16 6 1/2 1 1/16 30003G10 7.5 30004G10 10.5

3/8 8,800 15,200 3 3/4 4 1/8 6 3/4 8 11/16 1 9/16 30005G10 18.5 30006G10 24.5

1/2 12,000 20,800 4 3/8 4 3/8 9 3/4 12 3/4 2 30007 42 30008 52

Single Double Basket

Never exceed rated capacities.

Chain must be seated at the

base of adjusting slot of the

Master Control Link.


29/36

29

FEATURES

Easily adjust the legs for a level lift of unbalanced

and non-symetrical loads

Can be locked in place for repetitive lifts

Use in pairs for 4 point lifts

Can be used as top rigging for spreader beams

Great as rigging to move machinery

SPECIALTY SLINGSAdjust-A-Leg

The adjustable, two leg wire rope sling

* Reach should be a length of 70% or greater of the distance between pick up points.

Rated

Cap.*

(Tons)

(Legs @

45)

Part

No.

Std.

Reach

(Ft.)

Rope

Dia.

(In.)

Top Assembly Dim.

(In.) ABCT

Hook

Size

(Tons)

Wt.

(Lbs.)

1 AAL1 3 5/16 1.133.135.63 1 7.5

2 AAL2 4 5/16 1.133.135.63 1 1/2 20

4 AAL4 6 7/16 1.133.135.63 3 32

6 AAL6 9 9/16 1.755.258.38.81 4 1/2 76

8 AAL8 9 5/8 1.755.258.38.88 7 90

12 AAL12 9 3/4 2.385.638.751.06 11 152

15 AAL15 9 7/8 2.385.638.751.06 11 175

Level lifting of non-

symetrical loads where lift

points are not equidistant

from center of gravity.

Operation:For a level lift, adjust the leg lengths so that the master plate is above the approximate center of

gravity. Test position by lifting only until one end of the load is raised. Lower and reposition master

plate and legs for another test. Repeat until load raises without tilting. Adjust-A-Leg must be loaded

to at least 10% of rated capacity before legs will fully lock into place.

Level lifting of symetrical

loads where lift points are

not equidistant from center

of load.

Lifting of any load at an angle.

Typical Applications

Reach

B

A

C

A

C

Reach


30/36

30

FEATURES Balanced design allows for easy

rolling, even under load

Simple bolt together construction

Includes 4 steel swivel casters

Easy set-up and maintenance

GANTRY CRANES

Fixed Steel (H90)

Rated

Cap.*(Tons)

Height

Under

Beam(H) in Ft.

Nominal

Span(Ft.) A B C

D(In.)

E(In.)

Caster

Dia.(In.)

Weight(Lbs.) Model No.

1

10

10 10' 4" 11' 6" 5' 6" 6 3.33 6 825 H90-1-10/10

12 12' 4" 13' 6" 5' 6" 8 4 6 930 H90-1-10/12

14 14' 4" 15' 6" 5' 6" 8 4 6 967 H90-1-10/14

16 16' 4" 17' 6" 5' 6" 10 4.66 6 1136 H90-1-10/16

12

10 10' 4" 11' 6" 6' 6" 6 3.33 6 913 H90-1-12/10

12 12' 4" 13' 6" 6' 6" 8 4 6 1018 H90-1-12/12

14 14' 4" 15' 6" 6' 6" 8 4 6 1055 H90-1-12/14

16 16' 4" 17' 6" 6' 6" 10 4.66 6 1224 H90-1-12/16

14

10 10' 4" 11' 6" 7' 6" 6 3.33 6 977 H90-1-14/10

12 12' 4" 13' 6" 7' 6" 8 4 6 1082 H90-1-14/12

14 14' 4" 15' 6" 7' 6" 8 4 6 1119 H90-1-14/14

16 16' 4" 17' 6" 7' 6" 10 4.66 6 1288 H90-1-14/16

16

10 10' 4" 11' 6" 7' 6" 6 3.33 6 1081 H90-1-16/10

12 12' 4" 13' 6" 7' 6" 8 4 6 1186 H90-1-16/12

14 14' 4" 15' 6" 7' 6" 8 4 6 1223 H90-1-16/14

16 16' 4" 17' 6" 7' 6" 10 4.66 6 1392 H90-1-16/16


31/36

31

Rated

Cap.*

(Tons)

Height

Under

Beam

(H) in Ft.

Nominal

Span

(Ft.) A B C

D

(In.)

E

(In.)

Caster

Dia.

(In.)

Weight

(Lbs.) Model No.

2

10

10 10' 4" 11' 6" 5' 6" 8 4 8 949 H90-2-10/10

12 12' 4" 13' 6" 5' 6" 8 4 8 986 H90-2-10/12

14 14' 4" 15' 6" 5' 6" 10 4.66 8 1131 H90-2-10/14

16 16' 4" 17' 6" 5' 6" 10 4.66 8 1182 H90-2-10/16

12

10 10' 4" 11' 6" 6' 6" 8 4 8 1041 H90-2-12/10

12 12' 4" 13' 6" 6' 6" 8 4 8 1078 H90-2-12/12

14 14' 4" 15' 6" 6' 6" 10 4.66 8 1223 H90-2-12/14

16 16' 4" 17' 6" 6' 6" 10 4.66 8 1274 H90-2-12/16

14

10 10' 4" 11' 6" 7' 6" 8 4 8 1101 H90-2-14/10

12 12' 4" 13' 6" 7' 6" 8 4 8 1138 H90-2-14/12

14 14' 4" 15' 6" 7' 6" 10 4.66 8 1283 H90-2-14/14

16 16' 4" 17' 6" 7' 6" 10 4.66 8 1334 H90-2-14/16

16

10 10' 4" 11' 6" 7' 6" 8 4 8 1205 H90-2-16/10

12 12' 4" 13' 6" 7' 6" 8 4 8 1242 H90-2-16/12

14 14' 4" 15' 6" 7' 6" 10 4.66 8 1387 H90-2-16/14

16 16' 4" 17' 6" 7' 6" 10 4.66 8 1438 H90-2-16/16

3

10

10 9' 3" 11' 6" 5' 6" 10 4.66 8 1107 H90-3-10/10

12 11' 3" 13' 6" 5' 6" 10 4.66 8 1157 H90-3-10/12

14 13' 3" 15' 6" 5' 6" 10 4.66 8 1208 H90-3-10/14

16 15' 3" 17' 6" 5' 6" 12 5 8 1427 H90-3-10/16

12

10 9' 3" 11' 6" 6' 6" 10 4.66 8 1229 H90-3-12/10

12 11' 3" 13' 6" 6' 6" 10 4.66 8 1279 H90-3-12/12

14 13' 3" 15' 6" 6' 6" 10 4.66 8 1330 H90-3-12/14

16 15' 3" 17' 6" 6' 6" 12 5 8 1529 H90-3-12/16

14

10 9' 3" 11' 6" 7' 6" 10 4.66 8 1350 H90-3-14/10

12 11' 3" 13' 6" 7' 6" 10 4.66 8 1400 H90-3-14/12

14 13' 3" 15' 6" 7' 6" 10 4.66 8 1451 H90-3-14/14

16 15' 3" 17' 6" 7' 6" 12 5 8 1670 H90-3-14/16

16

10 9' 3" 11' 6" 7' 6" 10 4.66 8 1473 H90-3-16/10

12 11' 3" 13' 6" 7' 6" 10 4.66 8 1523 H90-3-16/12

14 13' 3" 15' 6" 7' 6" 10 4.66 8 1574 H90-3-16/14

16 15' 3" 17' 6" 7' 6" 12 5 8 1793 H90-3-16/16

5

10

10 9' 3" 11' 6" 5' 6" 12 5 8 1397 H90-5-10/10

12 11' 3" 13' 6" 5' 6" 12 5 8 1467 H90-5-10/12

14 13' 3" 15' 6" 5' 6" 15 5.5 8 1537 H90-5-10/14

16 15' 3" 17' 6" 5' 6" 15 5.5 8 1992 H90-5-10/16

12

10 9' 3" 11' 6" 6' 6" 12 5 8 1519 H90-5-12/10

12 11' 3" 13' 6" 6' 6" 12 5 8 1589 H90-5-12/12

14 13' 3" 15' 6" 6' 6" 15 5.5 8 1659 H90-5-12/14

16 15' 3" 17' 6" 6' 6" 15 5.5 8 2114 H90-5-12/16

14

10 9' 3" 11' 6" 7' 6" 12 5 8 1640 H90-5-14/10

12 11' 3" 13' 6" 7' 6" 12 5 8 1710 H90-5-14/12

14 13' 3" 15' 6" 7' 6" 15 5.5 8 1780 H90-5-14/14

16 15' 3" 17' 6" 7' 6" 15 5.5 8 2235 H90-5-14/16

16

10 9' 3" 11' 6" 7' 6" 12 5 8 1763 H90-5-16/10

12 11' 3" 13' 6" 7' 6" 12 5 8 1833 H90-5-16/12

14 13' 3" 15' 6" 7' 6" 15 5.5 8 1903 H90-5-16/14

16 15' 3" 17' 6" 7' 6" 15 5.5 8 2358 H90-5-16/16


32/36

32

FEATURES

Balanced design allows for easyrolling, even under load


Includes 4 steel swivel casters


Height adjustable in 1 ft. increments

GANTRY CRANES

Adjustable Steel (K90)

Rated

Cap.*

(Tons)

Max. Height

Under

Beam

(H) in Ft.

Nominal

Span (Ft.) A B C

D

(In.)

E

(In.)

Caster

Dia.

(In.)

Min. Height

Under

Beam (H)

Weight

(Lbs.) Model No.

1

10

10 10' 4" 11' 6" 5' 6" 6 3.33 6 6' 5" 825 K90-1-10/10

12 12' 4" 13' 6" 5' 6" 8 4 6 6' 5" 930 K90-1-10/12

14 14' 4" 15' 6" 5' 6" 8 4 6 6' 5" 967 K90-1-10/14

16 16' 4" 17' 6" 5' 6" 10 4.66 6 6' 5" 1136 K90-1-10/16

12

10 10' 4" 11' 6" 6' 6" 6 3.33 6 7' 5" 913 K90-1-12/10

12 12' 4" 13' 6" 6' 6" 8 4 6 7 5" 1018 K90-1-12/12

14 14' 4" 15' 6" 6' 6" 8 4 6 7' 5" 1055 K90-1-12/14

16 16' 4" 17' 6" 6' 6" 10 4.66 6 7' 5" 1224 K90-1-12/16

14

10 10' 4" 11' 6" 7' 6" 6 3.33 6 8' 5" 977 K90-1-14/10

12 12' 4" 13' 6" 7' 6" 8 4 6 8' 5" 1082 K90-1-14/12

14 14' 4" 15' 6" 7' 6" 8 4 6 8' 5" 1119 K90-1-14/14

16 16' 4" 17' 6" 7' 6" 10 4.66 6 8-' 5" 1288 K90-1-14/16

16

10 10' 4" 11' 6" 7' 6" 6 3.33 6 10' 5" 1081 K90-1-16/10

12 12' 4" 13' 6" 7' 6" 8 4 6 10' 5" 1186 K90-1-16/12

14 14' 4" 15' 6" 7' 6" 8 4 6 10' 5" 1223 K90-1-16/14

16 16' 4" 17' 6" 7' 6" 10 4.66 6 10' 5" 1392 K90-1-16/16


33/36

33

Rated

Cap.

(Tons)

Max. Height

Under

Beam

(H) in Ft.

Nominal

Span

(Ft.) A B C

D

(In.)

E

(In.)

Caster

Dia.

(In.)

Min. Height

Under

Beam (H)

Weight

(Lbs.) Model No.

2

10

10 10' 4" 11' 6" 5' 6" 8 4 8 6' 8" 949 K90-2-10/10

12 12' 4" 13' 6" 5' 6" 8 4 8 6' 8" 986 K90-2-10/12

14 14' 4" 15' 6" 5' 6" 10 4.66 8 6' 8" 1131 K90-2-10/14

16 16' 4" 17' 6" 5' 6" 10 4.66 8 6' 8" 1182 K90-2-10/16

12

10 10' 4" 11' 6" 6' 6" 8 4 8 7' 8" 1041 K90-2-12/10

12 12' 4" 13' 6" 6' 6" 8 4 8 7' 8" 1078 K90-2-12/12

14 14' 4" 15' 6" 6' 6" 10 4.66 8 7' 8" 1223 K90-2-12/14

16 16' 4" 17' 6" 6' 6" 10 4.66 8 7' 8" 1274 K90-2-12/16

14

10 10' 4" 11' 6" 7' 6" 8 4 8 8' 8" 1101 K90-2-14/10

12 12' 4" 13' 6" 7' 6" 8 4 8 8' 8" 1138 K90-2-14/12

14 14' 4" 15' 6" 7' 6" 10 4.66 8 8' 8" 1283 K90-2-14/14

16 16' 4" 17' 6" 7' 6" 10 4.66 8 8' 8" 1334 K90-2-14/16

16

10 10' 4" 11' 6" 7' 6" 8 4 8 10' 8" 1205 K90-2-16/10

12 12' 4" 13' 6" 7' 6" 8 4 8 10' 8" 1242 K90-2-16/12

14 14' 4" 15' 6" 7' 6" 10 4.66 8 10' 8" 1387 K90-2-16/14

16 16' 4" 17' 6" 7' 6" 10 4.66 8 10' 8" 1438 K90-2-16/16

3

10

10 9' 3" 11' 6" 5' 6" 10 4.66 8 6' 11" 1107 K90-3-10/10

12 11' 3" 13' 6" 5' 6" 10 4.66 8 6' 11" 1157 K90-3-10/12

14 13' 3" 15' 6" 5' 6" 10 4.66 8 6' 11" 1208 K90-3-10/14

16 15' 3" 17' 6" 5' 6" 12 5 8 6' 11" 1427 K90-3-10/16

12

10 9' 3" 11' 6" 6' 6" 10 4.66 8 7' 11" 1229 K90-3-12/10

12 11' 3" 13' 6" 6' 6" 10 4.66 8 7' 11" 1279 K90-3-12/12

14 13' 3" 15' 6" 6' 6" 10 4.66 8 7' 11" 1330 K90-3-12/14

16 15' 3" 17' 6" 6' 6" 12 5 8 7' 11" 1529 K90-3-12/16

14

10 9' 3" 11' 6" 7' 6" 10 4.66 8 8' 11" 1350 K90-3-14/10

12 11' 3" 13' 6" 7' 6" 10 4.66 8 8' 11" 1400 K90-3-14/12

14 13' 3" 15' 6" 7' 6" 10 4.66 8 8' 11" 1451 K90-3-14/14

16 15' 3" 17' 6" 7' 6" 12 5 8 8' 11" 1670 K90-3-14/16

16

10 9' 3" 11' 6" 7' 6" 10 4.66 8 10' 11" 1473 K90-3-16/10

12 11' 3" 13' 6" 7' 6" 10 4.66 8 10' 11" 1523 K90-3-16/12

14 13' 3" 15' 6" 7' 6" 10 4.66 8 10' 11" 1574 K90-3-16/14

16 15' 3" 17' 6" 7' 6" 12 5 8 10' 11" 1793 K90-3-16/16

5

10

10 9' 3" 11' 6" 5' 6" 12 5 8 7' 1397 K90-5-10/10

12 11' 3" 13' 6" 5' 6" 12 5 8 7' 1467 K90-5-10/12

14 13' 3" 15' 6" 5' 6" 15 5.5 8 7' 1537 K90-5-10/14

16 15' 3" 17' 6" 5' 6" 15 5.5 8 7' 1992 K90-5-10/16

12

10 9' 3" 11' 6" 6' 6" 12 5 8 8' 1519 K90-5-12/10

12 11' 3" 13' 6" 6' 6" 12 5 8 8' 1589 K90-5-12/12

14 13' 3" 15' 6" 6' 6" 15 5.5 8 8' 1659 K90-5-12/14

16 15' 3" 17' 6" 6' 6" 15 5.5 8 8' 2114 K90-5-12/16

14

10 9' 3" 11' 6" 7' 6" 12 5 8 9' 1640 K90-5-14/10

12 11' 3" 13' 6" 7' 6" 12 5 8 9' 1710 K90-5-14/12

14 13' 3" 15' 6" 7' 6" 15 5.5 8 9' 1780 K90-5-14/14

16 15' 3" 17' 6" 7' 6" 15 5.5 8 9' 2235 K90-5-14/16

16

10 9' 3" 11' 6" 7' 6" 12 5 8 11' 1763 K90-5-16/10

12 11' 3" 13' 6" 7' 6" 12 5 8 11' 1833 K90-5-16/12

14 13' 3" 15' 6" 7' 6" 15 5.5 8 11' 1903 K90-5-16/14

16 15' 3" 17' 6" 7' 6" 15 5.5 8 11' 2358 K90-5-16/16


34/36

34

FEATURES

Light-weight Aluminum construction Balanced design allows for easy rolling,

even under load


Includes 4 poly-coated swivel casters


GANTRY CRANES

Fixed Aluminum (HA90)

Rated

Cap.

(Tons)

Height

Under

Beam

(H)

Nominal

Span

(Ft.) A B C

D

(In.)

E

(In.)

Caster

Dia.

(In.)

Weight

(Lbs.) Model No.

1

7' 6"

6 6' 10" 8' 4" 4' 6 3.33 6 212 HA90-1-7/6

9 9' 10' 6" 4' 8 4 6 238 HA90-1-7/9

11 11' 12' 6" 4' 8 4 6 251 HA90-1-7/11

9' 2"

6 6' 10" 8' 4" 5' 6 3.33 6 234 HA90-1-9/6

9 9' 10' 6" 5' 8 4 6 260 HA90-1-9/9

11 11' 12' 6" 5' 8 4 6 273 HA90-1-9/11

10' 10"

6 6' 10" 8' 4" 6' 6 3.33 6 258 HA90-1-10/6

9 9' 10' 6" 6' 8 4 6 284 HA90-1-10/9

11 11' 12' 6" 6' 8 4 6 297 HA90-1-10/11

2

7' 6"

6 6' 4" 8' 4" 4' 8 4 8 351 HA90-2-7/6

8 8' 6" 10' 6" 4' 10 4.66 8 408 HA90-2-7/8

10 10' 6" 12' 6" 4' 10 4.66 8 429 HA90-2-7/10

9' 2"

6 6' 4" 8' 4" 5' 8 4 8 371 HA90-2-9/6

8 8' 6" 10' 6" 5' 10 4.66 8 428 HA90-2-9/8

10 10' 6" 12' 6" 5' 10 4.66 8 449 HA90-2-9/10

10' 10"

6 6' 4" 8' 4" 6' 8 4 8 401 HA90-2-10/6

8 8' 6" 10' 6" 6' 10 4.66 8 458 HA90-2-10/8

10 10' 6" 12' 6" 6' 10 4.66 8 479 HA90-2-10/10


35/36

35

FEATURES

Light-weight Aluminum construction Balanced design allows for easy

rolling, even under load


Includes 4 poly-coated swivel casters


Height adjustable in 6 in. increments

GANTRY CRANES

Adjustable Aluminum (KA90)

Rated

Cap.

(Tons)

Max. Height

Under

Beam (H)

Nominal

Span

(Ft.) A B C

D

(In.)

E

(In.)

Caster

Dia.

(In.)

Min. Height

Under

Beam (H)

Weight

(Lbs.) Model No.

1

7' 6"

6 6' 7" 8' 4" 4' 6 3.44 6 5' 6" 350 KA90-1-7/6

8 8' 9" 10' 6" 4' 8 4 6 5' 6" 375 KA90-1-7/8

10 10' 9" 12' 6" 4' 8 4 6 5' 6" 390 KA90-1-7/10

9' 2"6 6' 7" 8' 4" 5' 6 3.44 6 6' 2" 360 KA90-1-9/68 8' 9" 10' 6" 5' 8 4 6 6' 2" 385 KA90-1-9/8

10 10' 9" 12' 6" 5' 8 4 6 6' 2" 400 KA90-1-9/10

10' 10"

6 6' 7" 8' 4" 6' 6 3.44 6 7' 10" 385 KA90-1-10/6

8 8' 9" 10' 6" 6' 8 4 6 7' 10" 410 KA90-1-10/8

10 10' 9" 12' 6" 6' 8 4 6 7' 10" 425 KA90-1-10/10

12' 6"

6 6' 7" 8' 4" 6' 6" 6 3.44 6 9' 6" 415 KA90-1-12/6

8 8' 9" 10' 6" 6' 6" 8 4 6 9' 6" 440 KA90-1-12/8

10 10' 9" 12' 6" 6' 6" 8 4 6 9' 6" 455 KA90-1-12/10

2

7' 6"

6 6' 8' 4" 4' 8 4 8 5' 6" 460 KA90-2-7/6

8 8' 2" 10' 6" 4' 10 4.66 8 5' 6" 500 KA90-2-7/8

10 10' 6" 12' 6" 4' 10 4.66 8 5' 6" 525 KA90-2-7/10

9' 2"

6 6' 8' 4" 5' 8 4 8 6' 2" 485 KA90-2-9/6

8 8' 2" 10' 6" 5' 10 4.66 8 6' 2" 525 KA90-2-9/8

10 10' 6" 12' 6" 5' 10 4.66 8 6' 2" 550 KA90-2-9/10

10' 10"

6 6' 8' 4" 6' 8 4 8 7' 10" 520 KA90-2-10/6

8 8' 2" 10' 6" 6' 10 4.66 8 7' 10" 560 KA90-2-10/8

10 10' 6" 12' 6" 6' 10 4.66 8 7' 10" 585 KA90-2-10/10

12' 6"

6 6' 8' 4" 6' 6" 8 4 8 9' 6" 530 KA90-2-12/6

8 8' 2" 10' 6" 6' 6" 10 4.66 8 9' 6" 570 KA90-2-12/8

10 10' 6" 12' 6" 6' 6" 10 4.66 8 9' 6" 595 KA90-2-12/10


36/36

Manufacturing and Warehousing in:

Atlanta

Chicago

Houston

Las Vegas

Headquarters, Customer Service & Manufacturing:

1909 McFarland Dr.

Landisville, PA 17538-1810

800-909-1964

FAX: 717-898-1215

E-Mail: [email protected]

Customer Service: [email protected]

www lift all com

LIFTING DEVICES RETURN POLICY

1. Items to be returned MUST BE UNUSED and in like new condition.2. An RGA number must be obtained from our Customer Service Agents.

No unauthorized returns will be accepted.

3. Freight for returns must be prepaid by the customer to the location

designated by our Customer Service Agents.

4. Requests for returns must be made within 30 days of the original

shipment date.

5. A 25% restocking charge will apply to all authorized returns.

6. Credit will be issued after receipt, inspection and acceptance.

7. Custom ordered or modifed items may not be returned.

Documents

Lifting Devices Catalog 2015