Embed Size (px)
Citation preview
MASTER DEGREE PROGRAM “BIOENGINEERING SYSTEMS AND TECHNOLOGIES
OF REHABILITATION AND PROSTHETICS”
SAINT PETERSBURG STATEELECTROTECHNICAL UNIVERSITY “LETI”
DEPARTMENT OF BIOENGINEERING SYSTEMS
● ETU “LETI” is the oldest Electrotechnical University in Europe (it was founded in 1886)● The radio inventor Alexander Popov was the first elected director of the University● Professor Zhores I. Alferov, a graduate and the former Head of the ETU Optoelectronics
Department, was awarded the Nobel Prize in Physics jointly with Herbert Kroemer (2000)● Today about 9 000 students, including international students from different countries, study at
LETI simultaneously. ● Today the staff of LETI includes about 2300 people with more than 900 professors and PhDs,
20 laureates of national and international Prizes and 5 correspondent members of Russian Academy of Science
ETU “LETI”– TRADITIONS AND INNOVATIONS
2
● The first department in the Soviet Union which started training in the field of biomedical
engineering
● Currently one of the leading departments in the sphere of biomedical engineering in Russia
● Today the staff includes 12 Professors and 7 Associate Professors
● There are 3 levels of education: a Bachelor’s program – 4 years, 3 Master’s programs –
2 years, and a postgraduate program “Devices, systems and products for medical use”
● Since 2014 a new English language master degree program “Bioengineering Systems and
Technologies for Prosthetics and Rehabilitation” has been available
3
DEPARTMENT OF BIOENGINEERING SYSTEMS -
EDUCATION AND RESEARCH SINCE 1962
● Extent of the Program:120 ECTS credits, duration: 2 years (full-time studies)● Students get knowledge of prosthetics objects modeling and rehabilitation bioengineering
systems design. They get skills of practical work with modern technologies and systems for disabled patient examination, ability of carrying out scientific research during the development of new rehabilitation systems.
● The basis of the program was developed in 2006 as Tempus Joint Project #27097 “Developing capability in Orthotic and Prosthetic Education for the Russian Federation” in close collaboration with the University of Salford
● The program is implemented in collaboration with the ETU “LETI” Department of Applied Mechanics and Engineering Graphics
4
BIOENGINEERING SYSTEMS AND TECHNOLOGIES FOR PROSTHETICS AND
REHABILITATION
General Subjects 14
Professional Subjects 46
Technological Practice 6
Scientific-research practice 9
Scientific-research work
42
Final State Assessment 3
Educational programs of «LETI» are constantly modernized, following the principle «Training through research»
PROGRAM STRUCTURE (IN ECTS)
5
PROGRAM CURRICULUM
6
General course
Professional course
Personal projects
EDUCATIONAL PROCESS
7
Portable systems for remote monitoring of patient state guided by prof. Zafar M. Yuldashev
Biomechanics and Biomechanical Simulation of Prosthetics Objects
guided by prof. P. Begun (ETU Department of Applied Mechanics and
Engineering Graphics)
Technologies of prosthetics and rehabilitation guided by prof. Ludmila M. Smirnova
8
SCIENCE GROUPS AND LABORATORIES
Simulation in Bioengineering Systems guided by prof. Y. Senkevich
Medical decision support systemsguided by as. prof. Elena V. Sadykova
Biomedical signal processing guided by prof. Anatoliy P. Nemirko
9
SCIENCE GROUPS AND LABORATORIES
PARTNERS OF THE PROGRAM
11
● St. Petersburg Scientific and Practical Centre of Medical and Social Expertise, Prosthetics and Rehabilitation named after G. A. Albrecht (St. Petersburg)
● Federal Almazov Medical Research Center (St. Petersburg)
● The University of Salford (Manchester, UK)
● Helsinki Metropolia University of Applied Sciences (Helsinki, Finland)
● Wien University of Applied Sciences (Wien, Austria)
● Prague Technical University (Prague, the Czech Republic)
POSSIBLE SCIENTIFIC DIRECTIONS OF THE MASTER DEGREE
11
2. Computer analysis of patient’s body position in the space
1 . Feet scan analysis in static position and movement
12
3. Biomechanical simulation of prosthetics objects
POSSIBLE SCIENTIFIC DIRECTIONS OF THE MASTER DEGREE
4. Students can carry out their master thesis in other scienctific groups of the department or its partners (Federal Almazov Medical Research Center, Scientific and Practical Centre of Medical and Social Expertise, Prosthetics and Rehabilitation named after G. A. Albrecht )
DOUBLE DEGREE AND EXCHANGE STUDENT
PROGRAMS
INTERNATIONAL SCIENCE LIFE
INVITED FOREIGN
PROFESSORS
13
ANNUAL RUSSIAN-GERMAN CONFERENCE ON BIOMEDICAL
ENGINEERING
CAREER PROSPECTS
14
Types of graduates professional activity:
Places where to work:
● Medical centers● Industrial enterprises and firms● Certification, standardization and testing of medical devices● Scientific and research centers
● Technical maintenance of high-technology and science-intensive medical devices
● Development of new medical devices● Research in the field of Rehabilitation And Prosthetics
International Summer School at ETU “LETI”
● The program offers courses in 3 modules:• Bioengineering Systems and Technologies of Rehabilitation and Prosthetics• Economics and Management• International Business Communication
● The modules give a taste of Master programs in English● You can choose any subject from any module and combine them● Various cultural activities are also provided● Summer is the best time to visit St. Petersburg. Summer school takes place every
year in the first half of July● For more information please contact Ms. Tatiana S. Zharova ([email protected])
15
Thank you for the attention and see you among our students!
Know more athttp://www.eltech.ru/en/university
Contact us:Ms. Anna Y. Glazova,
the coordinator of the Master’s programe-mail: [email protected]
16
