Choose from our range of standard sheds or custom design to suit your needs

Thomsons ITM Pole Sheds are designed with total flexibility and can cater for almost any specific requirement you may have.

Lean To BuildingShed Depth: 6m, 9mWidth of bays: 3.6m, 4.8m, 5.4m (centre to pole)Bays: Minimum of 2 bays to as many as you likeRoof Height: This shed is available in four different heights. Each rises 600mm from the back of the shed to the frontThe roof heights are as follows:2.4m (back) rising to 3.0m (front)3.0m (back) rising to 3.6m (front)3.6m (back) rising to 4.2m (front) 4.2m (back) rising to 4.8m (front)

Lean To Building LVL Wide Span OptionShed depth: Up to 11.5mWidth of bays: Up to 6 mBays: Minimum of 2 bays to as many as you likeShed height: Up to 6.6m at the front

Gable Building StandardShed Depth: 6m, 9m, 12mWidth of bays: 3.6m, 4.8m, 5.4m (centre to pole)Bays: Minimum of 2 bays to as many as you likeRoof Height: This shed is available in three basic roof heights each rising 600mm from the outside wall to apex and then back to the same height at the other wallThe roof heights are as follows:A Back B Centre A Front3.0m 3.6m 3.0m3.6m 4.2m 3.6m4.2m 4.8m 4.2m

Gable Building LVL Wide Span OptionShed Depth: Up to 32mWidth of bays: Up to 6mBays: Minimum of 2 bays to as many as you likeRoof Height: Up to 6.5m at the apex

thomsonsitm.co.nz 0800 484 667 HAMILTON • WHATAWHATA • DRURY Crawford Street, Avalon Drive / Mason Road, Whatawhata / Great South Road, Drury

THOMSONS ITM POLE SHEDS

Plans supplied by Perma PineCladding supplied by Steel & Tube

Poles supplied by MiTek

YOUR SHED, YOUR WAY

RURAL & INDUSTRIALBUILDINGS

We welcome

A B Front

Height

Width Depth

Centre Height

BackHeight

Depth

Front Height

Width

thomsonsitm.co.nz 0800 484 667 HAMILTON • WHATAWHATA • DRURY Crawford Street, Avalon Drive / Mason Road, Whatawhata / Great South Road, Drury

Thomsons ITM Pole Sheds are available with various

tailored options. The standard building in kitset

form provides all materials including poles, timber,

hardware and Zincalume corrugated cladding, with

flashings optional.

Sold in either the roof only or roof and three wall

models, the standard option provides you with an

efficiently engineered building designed to suit

common applications at a competitive price.

Thomsons ITM Pole Sheds are designed with total

flexibility and can cater for almost any specific

requirement you may have. You can close in the

front, add roller and access doors. Utilise natural

weather protection by including translucent roof

sheeting or for additional weather protection, install

an eyebrow to the front, use the PVC spouting option

to catch your rain water. There are many proven

Thomsons ITM Pole Shed applications. Covered

yards, workshops, light industrial buildings... the

options are endless. We offer an economic option

designed to suit your individual needs.

Thomsons ITM Pole Sheds, available in a kitset and

you can choose to organise the builder or if you wish,

we can arrange experienced contractors to construct

your building.

On confirmation of your project we provide you with

two copies of construction plans suitable for lodging

your building consent.

THOMSONS ITM POLE SHEDS Ask about our range of LVL Widespan BuildingsUp to 11.5m clear spans and 6.0m bay widths make it easy to work in your building. Ideal for industrial use - full range of options available.