1
FT096EN_C_0515_MT732.indd MT 732 Lifting Max. capacity 3200 kg Max. lifting height 6.90 m Max. outreach 4.16 m Break-out force with bucket (ISO 8313) 5770 daN Time unladen Lifting 6.8 Lowering 5.8 Extension 6.8 Retraction 4.7 Crowd 3 Dump 2.9 Tyres 400/80-24 Braking Service brake oil immersed multi-disc braking on front/rear axles Parking brake oil immersed multi-disc mechanics on the front axle Engine DEUTZ - STAGE 3B Type TCD 3.6 L Cubic capacity 3621 cm 3 Power 101 HP/74,4 kW Max. torque 410 Nm Injection electronic Cooling water Laden drawbar pull 8250 daN Transmission torque converter Reversing shift electrohydraulic control Number of gears (forward/reverse) 4/4 Max. travel speed (may vary according to applicable regulations) 25 km/h Steering mode 4 wheel steer - 3 steering modes Controls JSM ® Joystick multi-function load limiter cut off system - EN15000 Norm Hydraulics Pump gear type with priority valve 104 l/min - 260 bar Capacities Hydraulic oil 128 l Fuel 120 l Unladen weight (with forks) 7585 kg Dimensions 1. Front wheel centre to carriage 1.44 m 2. Wheelbase 2.56 m 3. Rear wheel centre to rear face 0.74 m 4. Overall length to carriage 4.74 m 5. Ground clearance 0.45 m 6. Overall width of cab 0.89 m 7. Inside tyre width 2.05 m 8. Overall width 2.34 m 9. Overall height 2.30 m Standard forks (length x width x thickness) 1200 x 125 x 45 mm Turning radius (over tyres) 3.72 m Carriage rotation (crowd/dump) 13° / 113.8° Noise and vibration Noise at driving position (LpA) 78 dB Environmental noise (LwA) 106 dB Vibration to whole hand/arm <2.50 m/s 2 This brochure describes versions and configuration options for MANITOU products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. MANITOU reserves the right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your MANITOU dealer. Non-contractual document. Product descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of MANITOU and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are provided for information only. MANITOU BF SA - Limited company with board of directors - Share capital: 39 547 824 euros - 857 802 508 RCS Nantes Rough Terrain Load Chart standard EN1459 B Machine on tyres with forks 63° 60° 50° 8 7 40° 6,90 6 5 30° 4 20° 3 2 10° 1 0m -3° 5 4 3 2 1 0m 0.5m 4,16 3,60 2,90 2,40 2,10 1,75 1,45 1250kg 1500kg 2000kg 2500kg 2800kg 3200kg 4 2 5 1 3 7 8 6 9 14

RoughTerrainLoadChart MT732 standardEN1459B · FT096EN_C_0515_MT732.indd MT732 Lifting Max.capacity 3200kg Max.liftingheight 6.90m Max.outreach 4.16m Break-outforcewithbucket(ISO8313)

Embed Size (px)

Citation preview

FT096EN_C_0515_MT732.indd

MT 732LiftingMax. capacity 3200 kgMax. lifting height 6.90 mMax. outreach 4.16 mBreak-out force with bucket (ISO 8313) 5770 daNTime unladenLifting 6.8Lowering 5.8Extension 6.8Retraction 4.7Crowd 3Dump 2.9Tyres 400/80-24Braking

Service brake oil immersed multi-disc brakingon front/rear axles

Parking brake oil immersed multi-disc mechanics on the front axleEngine DEUTZ - STAGE 3BType TCD 3.6 LCubic capacity 3621 cm3

Power 101 HP/74,4 kWMax. torque 410 NmInjection electronicCooling waterLaden drawbar pull 8250 daNTransmission torque converterReversing shift electrohydraulic controlNumber of gears (forward/reverse) 4/4Max. travel speed(may vary according to applicable regulations)

25 km/h

Steering mode 4 wheel steer - 3 steering modes

Controls JSM® Joystick multi-functionload limiter cut off system - EN15000 Norm

HydraulicsPump gear type with priority valve 104 l/min - 260 barCapacitiesHydraulic oil 128 lFuel 120 lUnladen weight (with forks) 7585 kgDimensions1. Front wheel centre to carriage 1.44 m2. Wheelbase 2.56 m3. Rear wheel centre to rear face 0.74 m4. Overall length to carriage 4.74 m5. Ground clearance 0.45 m6. Overall width of cab 0.89 m7. Inside tyre width 2.05 m8. Overall width 2.34 m9. Overall height 2.30 mStandard forks (length x width x thickness) 1200 x 125 x 45 mmTurning radius (over tyres) 3.72 mCarriage rotation (crowd/dump) 13° / 113.8°Noise and vibrationNoise at driving position (LpA) 78 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm <2.50 m/s2

This brochure describes versions and configuration options for MANITOU products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. MANITOU reservesthe right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your MANITOU dealer. Non-contractual document. Product descriptionsmay differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of MANITOU and may not be used without authorisation. All rights reserved. The photos and diagrams contained in thisbrochure are provided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39 547 824 euros - 857 802 508 RCS Nantes

Rough Terrain Load Chartstandard EN1459 B

Machine on tyres with forks

63°60°50°

8

740°6,90

6

530°

4

20°3

210°

1

0m-3°

5 4 3 2 1 0m

0.5m

4,16 3,60 2,902,40

2,101,75

1,45

1250

kg 1500

kg 2000

kg25

00kg

2800

kg 3200

kg

42

5

1 3

78

6

9

14

700550EN_B_0515_MT732_932.indd 14 05/05/15 10:12