Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Rooflights BrochureFor beautifully designed, naturally lit flat roof environments.
Issue No. 1: July 2013
The Lantern Rooflight, Wiltshire. For the full case study visit: www.therooflightcompany.co.uk/case-studies
2Walk on Rooflight. For case studies visit
www.therooflightcompany.co.uk/case-studies
The Walk on Rooflight 9
The Lantern Rooflight 13
The Pyramid Rooflight 17
Secured by Design 21
The Added Security Rooflight 25
The Polyedge Rooflight 29 Accessories 30
Project Portfolio 34
Contents
3
Founded in 1993 by architect, Peter King RIBA, created the original conservation roof window (the Conservation Rooflight®), which continues to lead the marketplace as the best product in its class. Today, this award-winning organisation is developing in the field of contemporary architecture and interior design. This was underlined when the Rooflight Company commenced production of its innovation - neo™.
Featuring a sleek design and flush edge-to-edge glazing, neo™ has unique properties and a frameless, minimalist appearance which complements modern architecture perfectly. Designed entirely from the specifier’s point of view, its clean lines merge unobtrusively with the roof and provide unobscured views from the interior.
Underpinned by this ethos of innovative design, it is continuously evolving its product range and breaking new ground with its acclaimed, industry-leading concepts.
Bespoke Lantern Rooflight, Twickenham. For the full case study visit: www.therooflightcompany.co.uk/case-studies
4
Standards and Performance Kite MarkThe BSI Kitemark scheme for insulating glass units is recognised as the best way to identify certified, quality safety glass for use in buildings. We are certified to BS EN 1279-2 and BS EN 1279-3.
Secured by Design The Rooflight Company designed the first rooflight to be Secured by Design certified to Loss Prevention Standard 1175-6 Level 3. See pages 20-23.
ISO 9001The Rooflight Company is ISO 9001 certified, meaning that all our roof windows are manufactured to this Quality Management standard.
The Rooflight Experts
Residential Property Oxford. Walk on Rooflights allow natural light ingress to spaces below whilst creating a usable space above.
Robinsons Brewery Visitors Centre. A total of eighteen modular sections were joined together to create one large Lantern Rooflight.
Two Pyramid 1200s were installed on this National Trust property in Surrey along with two special Lanterns.
Pyramid and Lantern Rooflights were specified to provide light and ventilation to a large flat roof extension in this updated mansion house.
5
Design Focus Great design is at the heart of all of our rooflights. Each of our rooflights are aesthetically pleasing and features fine lines, a low-profile and a high quality finish both inside and out. That’s why we’ve been specified by many of the Top 100 architects practices such as Zaha Hadid, Purcell Miller Tritton and Will Alsop, to name but a few.
DurabilityMade from mild steel, each of our rooflights is designed to last. We provide a glazing guarantee of 5 years and 12 years frame guarantee on every rooflight.
Choice & SizesThe Rooflight Company offers the UK’s widest range of roof windows, rooflights and bespoke designs. Whatever shape your roof window project is, we’ll have the perfect fit.
Neat & Easy to InstallAll of our rooflights are simple to install and technical advice is always on hand from our technically-trained team should you require it.
ServiceAs a company founded by an architect, we are unique in truly understanding the needs of architects. Our in-house sales and design teams have the capability to take your brief and translate it into a complete solution including technical drawings.
Designed & Assembled in the UKThe Rooflight Company is based in Oxfordshire and we are proud to be part of the British Manufacturing Industry. Employing over 60 staff, we design and assemble all of our rooflights here in the UK.
6
How the Thermoliner® works
The unique and patented Thermoliner® thermally decoupled lining made from UPVC ensures condensation control. It is integral to the rooflight frame, inconspicuous and rebated for 12.5mm plasterboard or timber linings to aid internal finishing. The integral drainage slots ensure that any condensation that may occur is drained out of the building. The Thermoliner® is available in black, white, dark and light grey to match BS colours detailed below.
Glazing
The standard glazing specification for rooflights achieves a centre pane u-value (Ug) of 1.2Wm2K or 1.0 Wm2k for Walk on Rooflights in accordance with EN 673:2011. The u-value results are for the glazing orientated in the vertical pane.
Rooflight colour to match any roof covering
Black (RAL 9005) is our standard colour but white (RAL 9010), dark grey (BS00A13) and light grey (BS 00A09) are available and can be specified with matching silicone and Thermoliner®. However any colour of paint for the Flat Roof range can be specified according to project requirements.
Specification details for all rooflights
All rooflights are constructed from a mild steel with protective coating, polyester-powder coated paint and condensation control from the patented Thermoliner®.
The Walk on Rooflight has a unique draining system. Any condensation which forms within the rooflight is channelled out through the drainage pipes and out of the casement.
WHITE LIGHT GREY (RAL 9010) (BS 00A09)
Please specify colour:
DARK GREY BLACK (BS 00A13) (RAL 9005)
7
Parts List
1. Roof window casement2. Roof window baseplate3. Roof window thermoliner4. Roof window double glazing panel5. Roof window timber lining6. Timber reveal7. Plaster board and skim8. Ply packer
9. Deck10. Structural supports11. Insulation12. Packer13. Structural boards14. Lead15. Roofing membrane16. Vapour barrier
1.4.
5.
6.
9.
10.
11.
8.
7.
2.
14.15.
12.13.
3.
16.
Jamb section showing Thermoliner®Thermally-decoupled lining and interior reveal
the
Wal
k on
Roo
fligh
t
8
Walk on Rooflight, Oxfordshire. For the full case study visit:www.therooflightcompany.co.uk/case-studies
the Walk on Rooflight
the Walk on R
ooflight
9
The Walk on Rooflight A rooflight suitable for horizontal installation
The Walk on Rooflight from the Rooflight Company is designed for domestic use of flat roof areas whilst affording the benefits of daylighting to the space beneath the roof.
The Walk on Rooflight concept is fast growing in popularity alongside the increasing need for maximum space utilisation. A typical installation is where access to a flat roof space is required to enable the area to be used as a roof terrace or garden or simply to allow safe access across the roof area.
The Rooflight Company Walk on Rooflight sits flush with the roofing material or decking surface and is available in a range of sizes, colours and glazing options, for example the installation may require an obscured inner leaf to the double glazed maximum unit to provide privacy to and from the space beneath. Discuss your requirements with the Customer Services team and we’ll be happy to provide a Walk on Rooflight to suit your needs.
How to maximise living space is a common challenge for architects, especially in urban areas.
The owner of this residential property in Oxford wanted to transform an unusable flat roof area with a domed skylight into an off-bedroom terrace, without reducing natural light ingress to the room below when removing the dome light.
The design of the Walk on Rooflight allowed the client to maximise the whole of the roof area as desired.
“The Walk on Rooflight was researched and specified by Tom Man from Perioli Man Architects. It was specified by the architect as being the perfect product for what the client was trying to achieve.
The technical information and support from the Rooflight Company was a key factor to the success of this project, having never installed a Walk on Rooflight before. They were able to answer all of our questions and queries throughout the project from design to installation to ensure all went smoothly.
The client is extremely happy as it has turned out exactly as she had imagined. We will definitely be working with you again on future projects.”
Steve - Rayner Ltd (Contractor)
The architect specified a Walk on Rooflight with structural measurements of 1148mm x 1148mm with clear glazing.
Features Include:
• Flush fitting.
• Stainless Steel construction for strength.
• Range of colour choices.
• Powder coated finish for durability.
• ‘Fixed Shut’ providing safety and sleek lines.
• Built to ISO 9001 in our UK factory.
• The Walk on Rooflight achieves a whole window u-value (Uw) of 1.3Wm2K in accordance with EN ISO 10077-2:2012. The u-value results are for the window orientated in the vertical pane.
• Glazing Loads: 1.4kN concentrated loads and assumed uniform distributed load of 1.5kN/m².
• Various surface finishes available(recommended slip resistance for external areas).
Residential Property Oxford
Clear Float
Sandblast
Dot Matrix
the
Wal
k on
Roo
fligh
t
10
Varia
ble
to C
lient
In
stal
latio
n D
etai
l
108
mm
150m
mM
inim
um K
erb
Hei
ght
115m
m M
axim
umKe
rb W
idth
57m
m
50m
m V
iew
able
toSt
ruct
ural
CLE
AR S
TRU
CTU
RAL
12
38
57
109 11 12 13
1415161719 18
46
Item
Des
crip
tion
133
mm
trip
le la
min
ate
oute
r pan
el, 1
6mm
arg
on fi
lled
cavi
ty, 8
.8m
m lo
w
emm
isiv
ity la
min
ated
IGU
- FA
CTO
RY
FITT
ED
2Lo
w m
odul
us, n
eutra
l cur
e si
licon
e w
eath
er s
eal -
FAC
TOR
Y FI
TTED
3Po
lyes
ter p
owde
r coa
ted
stai
nles
s st
eel f
ram
e - F
ACTO
RY
FITT
ED
4Pa
cker
- SU
PPLI
ED B
Y O
THER
S
5D
ecki
ng s
uppo
rt an
gle
(use
whe
re re
quire
d) -
SUPP
LIED
BY
OTH
ERS
6Lo
w m
odul
us, n
eutra
l cur
e si
licon
e th
ick
perm
iete
r sea
l (ap
ply
befo
re
fittin
g ro
oflig
ht to
ker
b up
stan
d) -
SUPP
LIED
BY
OTH
ERS
7D
ecki
ng ti
mbe
r fra
me
- SU
PPLI
ED B
Y O
THER
S
8D
ecki
ng -
SUPP
LIED
BY
OTH
ERS
9Ex
tern
al w
eath
ered
sur
face
- SU
PPLI
ED B
Y O
THER
S
10Ad
just
able
dec
king
sup
port
- SU
PPLI
ED B
Y O
THER
S
11R
oofin
g bo
ards
- SU
PPLI
ED B
Y O
THER
S
12Pl
aste
rboa
rd (1
2.5m
m) -
SU
PPLI
ED B
Y O
THER
S
13Pl
aste
r ski
m (3
mm
nom
inal
) - S
UPP
LIED
BY
OTH
ERS
14R
oof j
oist
s - S
UPP
LIED
BY
OTH
ERS
15So
ftwoo
d pa
cker
s - S
UPP
LIED
BY
OTH
ERS
16Ke
rb u
psta
nd -
SUPP
LIED
BY
OTH
ERS
17C
oach
scre
ws
- FAC
TOR
Y SU
PPLI
ED
18Th
erm
olin
er -
FAC
TOR
Y FI
TTED
19Ti
mbe
r lin
ings
- FA
CTO
RY
FITT
ED*
* TH
IS IT
EM M
UST
BE
PAIN
TED
WIT
H A
TIM
BER
FIN
ISH
ING
PA
INT
ON
CE
THE
UN
IT IS
INST
ALL
ED T
O E
NSU
RE
LON
GEV
ITY
OF
THIS
CO
MPO
NEN
T -
UN
DER
TAK
EN B
Y O
THER
S.
THE
WA
LK-O
N P
LATE
AU
RO
OFL
IGH
T SH
OU
LD B
E IN
STA
LLED
ON
TO A
FL
AT
RO
OF
CO
NST
RU
CTI
ON
TH
AT
HA
S SU
FFIC
IEN
T C
ON
SID
ERA
TIO
N
TO A
LLO
W F
OR
AD
EQU
ATE
DR
AIN
AG
E B
OTH
OFF
TH
E R
OO
FIN
G
STR
UC
TUR
E A
ND
TH
E R
OO
FLIG
HT
ITSE
LF. I
F SU
FFIC
IEN
T D
RA
INA
GE
IS
NO
T PR
ESEN
T, W
ATE
R P
OO
LIN
G M
AY
OC
CU
R, W
HIC
H W
ILL
REQ
UIR
E M
OR
E R
EGU
LAR
CLE
AN
ING
OF
THE
RO
OFL
IGH
T.
PLEA
SE N
OTE
:
THIS
DR
AW
ING
DO
ES N
OT
CO
NST
ITU
TE A
STR
UC
TUR
AL
PRO
POSA
L.
SIZI
NG
OF
STR
UC
TUR
AL
SUPP
OR
T M
EMB
ERS
TO B
E PR
OVI
DED
BY
RO
OFL
IGH
T PU
RC
HA
SER
'S S
TRU
CTU
RA
L EN
GIN
EER
.
FOR
DO
MES
TIC
LO
AD
ING
APP
LIC
ATI
ON
S O
NLY
WH
ERE.
> M
AXI
MU
M C
ON
CEN
TRA
TED
LO
AD
= 1
.4kN
.>
MA
XIM
UM
UN
IFO
RM
DIS
TRIB
UTE
D L
OA
D =
1.5
kN/m
2 .
The
Roo
fligh
t Com
pany
's P
OLI
CY
IS T
O C
ON
TIN
UO
USL
Y D
EVEL
OP
AN
D
IMPR
OVE
OU
R P
RO
DU
CTS
AN
D T
HER
EFO
RE
RES
ERVE
TH
E R
IGH
T TO
M
OD
IFY
OR
CH
AN
GE
PRO
DU
CT
DET
AIL
S A
T O
UR
DIS
CR
ETIO
N A
ND
W
ITH
OU
T PR
IOR
NO
TIC
E.
The Walk on Rooflight Cross Section
the Walk on R
ooflight
11
The Walk on Rooflight Sizes
Internal Viewable Width (mm)
Internal ViewableW
idth (mm
)
Structural Kerb W
idth (mm
)
External W
idth (mm
)
900
900
600
600
1200
1300
1500
1200
2000
Structural Kerb Width (mm)
1000700 1300 1600 2100
External Width (mm)
1114814 1414 1714 2214
1000
700
1400
1300
1114
814
1514
1414
Walk On Sizes
WO-01 WO-07 WO-08
WO-09WO-02 WO-10 WO-12
WO-11
1300
1400
1514
WO-04
WO-03
External Width Viewable Width
For more information regarding sizes and installation, contact our technically-trained team on 01993 833108.
the
Lant
ern
Roo
fligh
t
12
Bespoke Lantern Rooflight, Wiltshire. For the full case study visit: www.therooflightcompany.co.uk/case-studies
the Lantern Rooflight
the Lantern Rooflight
13
the Lantern Rooflight
Lantern Rooflights are used to great effect in many types of buildings particularly Victorian ones, where the shape and proportions fit well with the architecture. Their fine steel edges and traditional appearance ensure that the original lines of the building are not disrupted, and the increase in light they offer is extremely effective.
Residential property, Knightsbridge, London
The impact of overhead natural light can turn a normal stairwell into a masterpiece of shadows and tones - precisely the result of installing this Lantern (1200mm x 1500mm) into an early Victorian villa in central London. The narrow steel sections maximise light to the stairwell below. In order to blend with the pale yellow interior, the glazing bars and silicone are white, as is the Thermoliner® thermal lining, which ensures condensation control. The Lantern replaced a tired polycarbonate dome yellowed with age.
A Lantern Rooflight measuring 1200mm x 1500mm for a residential property, Wiltshire.
The silicone and Thermoliner® are white to blend with the pale interior on this Lantern Rooflight.
Interior view of a Lantern Rooflight 1200mm x 1500mm.
Lantern Rooflight, Calne, Wiltshire
Neville Hoyland of Watson Bertram and Fell, Bath, specified this Bespoke Lantern for a new extension to an early Victorian dairy. The client wanted a light and airy room, which is positioned at the south west corner, but did not want a conservatory. The solution was to specify a Lantern Rooflight measuring 1200mm x 2500mm which illuminates the room and enhances the building’s external appearance.
A Lantern Rooflight measuring 1200mm x 1500mm for a residential property, Wiltshire.
A rooflight suitable for horizontal installation.
the
Lant
ern
Roo
fligh
t
14
The Lantern Rooflight Cross Section
Inte
rnal
ker
bw
idth
/leng
th.
Exte
rnal
ker
bw
idth
/leng
th.
150
min
imum
ker
b he
ight
reco
mm
ende
d.
9mm
mar
ine/
WBP
ply
pack
ers
on k
erb
top.
Ther
mol
iner
.Th
erm
ally
-dec
oupl
ed li
ning
su
bfra
me-
fact
ory
fitte
d.
Tim
ber l
inin
g by
con
tract
or.
Inse
ct m
esh.
150m
han
d w
inde
r.(o
ptio
n A
or J
) sho
wn
here
will
open
the
roof
light
app
roxi
mat
ely
150m
m a
t the
cill.
150m
m m
axim
um
kerb
wid
th.
DO
NO
T SC
ALE.
IF
IN D
OU
BT A
SK.
ALL
DIM
ENSI
ON
S IN
MIL
LIM
ETER
S U
NLE
SS S
TATE
D O
THER
WIS
E.
This
det
ail s
how
s a
vent
ilate
d ro
of c
avity
with
a le
ad/s
heet
cov
erin
g ov
er.
Lead
roof
ing.
Sepa
ratin
g m
embr
ane.
Ply
subs
trate
to le
ad ro
of d
eck.
Stru
ctur
e ve
ntila
tion
air p
ath.
25
12.5
the Lantern Rooflight
15
The Lantern Rooflight Sizes
Model
hex900 (min)hex2000 (max)oct900 (min)oct2000 (max)
Max.KerbThickness (mm)
150150150150
Internal Kerb Width (mm)
9002000 9002000
Max.Ext.KerbWidth (mm)
1200230012002300
Glazing Pitch(degrees)
20 degrees20 degrees20 degrees20 degrees
Maxim
um External Kerb W
idth
Internal Kerb WidthMax.Kerb
Thickness
Note: This framing is for hex. rooflights only
Kerb Height150mm Min
Existing Flat Roof
Model
pl600pl900pl1200pl1500*
Max.Kerb Thickness (mm)
150 150 150 150 150 150 150 150 150 150 150 150 150 150 150
Internal Kerb Width (mm)
600 90012001500 90012001200150015002000
600 900 90012001200
Internal Kerb Length (mm)
600 90012001500 600 600 900 90012001500
600 900 600 600 900
Max.Ext. Kerb Width (mm)
900120015001800120015001500180018002300
9001200120015001500
Max.Ext. Kerb Length (mm)
900120015001800 900 9001200120015001800
9001200 900 9001200
RooflightWeight (Kg)
39 62 89 121 48 57 69 80 95 135 39 62 900 9001200
*Note: pl1500 rooflights utilise 1 central glazing bar. Ironmongery can be found on p22-23. Note ironmongery required with escape. Plateaus to be installed on a 5º pitch. Open edge must be at lowest point for water drainage/run off.
Model
LT01LT02 LT03LT04LT05LT06
pl600x900pl600x1200pl900x1200pl900x1500pl1200x1500pl1500x2000*
pl600Accesspl900Accesspl600x900Accesspl600x1200Accesspl900x1200Access
Max.KerbThickness (mm)
150150150150150150
Internal KerbWidth (mm)
90012001200150015002000
Internal KerbLength (mm)
600 600 900 90012001500
Max.Ext.KerbWidth (mm)
120015001500180018002300
Max.Ext. KerbLength (mm)
900 9001200120015001800
RooflightWeight (Kg)
75 86112127162226
Glazing Pitch* (degrees)
454545454545
*Note: Standard pitch is 45º. A 10º - 45º glazing pitch can be specified on a non standard Rooflight. Please contact Customer Service on 01993 833143, 833117, 833136.
Model
PY01PY02PY03PY04
Max.Kerb Thickness (mm)
150150150150
Internal Kerb Width (mm)
600 90012001500
Internal Kerb Length (mm)
600 90012001500
Max.Ext. Kerb Width (mm)
900120015001800
Max.Ext. Kerb Length (mm)
900120015001800
RooflightWeight (Kg)
54 87127177
GlazingPitch * (Degrees)
45454545
*Note: Standard pitch is 45º; A 10º - 45º glazing pitch can be specified on a non standard Rooflight. Please contact Customer Service on 01993 833143, 833117, 833136.
Maximum External Kerb Width
Internal Kerb Width
Maxim
um External Kerb Length
Internal Kerb Length
Max. Kerb Thickness
Kerb Height150mm Min
Existing Flat Roof
Model
pl600pl900pl1200pl1200x600pl1200x900pl900x600
Max.Kerb Thickness (mm)
150150150150150150
Internal Kerb Width (mm)
600 900120012001200 900
Internal Kerb Length (mm)
600 9001200 600 900 600
Max.Ext. Kerb Width (mm)
90012001500150015001200
Max.Ext. Kerb Length (mm)
90012001500 9001200 900
Note: The above dimensions are examples of models which can be achieved. Please contact Specials Dept on 01993 833143, 833117, 833136.
Kerb Layout for Plateau, Pyramid and Lantern Rooflights
the Pyramid Rooflight
the Lantern Rooflight
the Polyedge Rooflight
the Plateau Rooflight
the Walk On Rooflight
the Added Security Rooflight
The above dimensions are examples of models which can be achieved. Please contact our Customer Service Department to discuss your requirements on 01993 833143, 833117, 833136.
Please contact 01993 833143, 833117, 833136 to discuss specification details and options available.
Please contact 01993 833143, 833117, 833136 to discuss specification details and options available.
Max. Kerb Thickness
Existing Flat Roof
Internal Kerb Length (mm)External Kerb Length (mm)
Kerb Height 150mm min.
External Kerb Width
Internal Kerb Width
LT01 LT02
Internal KerbWidth (mm)
Internal KerbLength (mm)
900
900
600
1200
1200
1500
1500
2000
LT03 LT04
LT05
LT06
the
Pyra
mid
Roo
fligh
t
16
The Pyramid Rooflight, East Sussex. For the full case study visit: www.therooflightcompany.co.uk/case-studies
the Pyramid Rooflight
the Pyramid R
ooflight
17
The Pyramid Rooflight A rooflight suitable for horizontal installation.
Commercial Premises, Tewkesbury
Pyramid Rooflights were specified for an extension to commercial premises in the historic High Street of Tewkesbury. As a large number of the original Tudor buildings overlook the property, the architect wanted to achieve an appearance that was aesthetically pleasing, while introducing much-needed ventilation.
Black Pyramid Rooflights provide light and ventilation in an extension to a Tudor building.
A combination of Pyramids and Lanterns provide huge amounts of light while being aesthetically pleasing.
A Conservation Rooflight® and a Pyramid Rooflight.
Mansion House, Wiltshire
Pyramid and Lantern Rooflights were specified to provide light and ventilation to a large flat roof extension to a mansion house in Wiltshire. The architect wanted to maximise light to the new accommodation and chose four Pyramid 1200mm and two Lanterns measuring 1200mm x 1500mm. The fine steel lines ensure maximum light penetration to the spaces below, while offering a pleasing visual appearance to the roof.
Extension to church, Ringmer, East Sussex
A Pyramid Rooflight measuring 1200mm x 1200mm placed deep in a leaded valley between clay-tiled pitched roof sections to an extension of a church. The Pyramid Rooflight cannot be seen externally, but floods a lobby between the old church and new community rooms below with light – introducing an element of surprise into an area with no apparent natural light source. The clear glass of the Pyramid Rooflight assists light penetration, where an obscured or polycarbonate unit would not let in sufficient light to give this surprise effect.
The Pyramid shape is incorporated in many project designs today for both traditional and modern buildings. The Pyramid Rooflight benefits from the same weathering and design characteristics featured in page 6. The finely detailed design along with the Pyramid’s weathering prospects are cited as reasons for specification.
the
Pyra
mid
Roo
fligh
t
18
The Pyramid Rooflight Cross Section
Inte
rnal
ker
bw
idth
/leng
th.
Exte
rnal
ker
bw
idth
/leng
th.
150
min
imum
ker
b he
ight
reco
mm
ende
d.
9mm
mar
ine/
WBP
ply
pack
ers
on k
erb
top.
Ther
mol
iner
.Th
erm
ally
-dec
oupl
ed li
ning
su
bfra
me-
fact
ory
fitte
d.
Tim
ber l
inin
g by
con
tract
or.
Inse
ct m
esh.
150m
han
d w
inde
r.(o
ptio
n A
or J
) sho
wn
here
will
open
the
roof
light
app
roxi
mat
ely
150m
m a
t the
cill.
150m
m m
axim
um
kerb
wid
th.
DO
NO
T SC
ALE.
IF
IN D
OU
BT A
SK.
ALL
DIM
ENSI
ON
S IN
MIL
LIM
ETER
S U
NLE
SS S
TATE
D O
THER
WIS
E.
This
det
ail s
how
s a
vent
ilate
d ro
of c
avity
with
a le
ad/s
heet
cov
erin
g ov
er.
Lead
roof
ing.
Sepa
ratin
g m
embr
ane.
Ply
subs
trate
to le
ad ro
of d
eck.
Stru
ctur
e ve
ntila
tion
air p
ath.
25
12.5
the Pyramid R
ooflight
19
The Pyramid Rooflight Sizes
Model
hex900 (min)hex2000 (max)oct900 (min)oct2000 (max)
Max.KerbThickness (mm)
150150150150
Internal Kerb Width (mm)
9002000 9002000
Max.Ext.KerbWidth (mm)
1200230012002300
Glazing Pitch(degrees)
20 degrees20 degrees20 degrees20 degrees
Maxim
um External Kerb W
idth
Internal Kerb WidthMax.Kerb
Thickness
Note: This framing is for hex. rooflights only
Kerb Height150mm Min
Existing Flat Roof
Model
pl600pl900pl1200pl1500*
Max.Kerb Thickness (mm)
150 150 150 150 150 150 150 150 150 150 150 150 150 150 150
Internal Kerb Width (mm)
600 90012001500 90012001200150015002000
600 900 90012001200
Internal Kerb Length (mm)
600 90012001500 600 600 900 90012001500
600 900 600 600 900
Max.Ext. Kerb Width (mm)
900120015001800120015001500180018002300
9001200120015001500
Max.Ext. Kerb Length (mm)
900120015001800 900 9001200120015001800
9001200 900 9001200
RooflightWeight (Kg)
39 62 89 121 48 57 69 80 95 135 39 62 900 9001200
*Note: pl1500 rooflights utilise 1 central glazing bar. Ironmongery can be found on p22-23. Note ironmongery required with escape. Plateaus to be installed on a 5º pitch. Open edge must be at lowest point for water drainage/run off.
Model
LT01LT02 LT03LT04LT05LT06
pl600x900pl600x1200pl900x1200pl900x1500pl1200x1500pl1500x2000*
pl600Accesspl900Accesspl600x900Accesspl600x1200Accesspl900x1200Access
Max.KerbThickness (mm)
150150150150150150
Internal KerbWidth (mm)
90012001200150015002000
Internal KerbLength (mm)
600 600 900 90012001500
Max.Ext.KerbWidth (mm)
120015001500180018002300
Max.Ext. KerbLength (mm)
900 9001200120015001800
RooflightWeight (Kg)
75 86112127162226
Glazing Pitch* (degrees)
454545454545
*Note: Standard pitch is 45º. A 10º - 45º glazing pitch can be specified on a non standard Rooflight. Please contact Customer Service on 01993 833143, 833117, 833136.
Model
PY01PY02PY03PY04
Max.Kerb Thickness (mm)
150150150150
Internal Kerb Width (mm)
600 90012001500
Internal Kerb Length (mm)
600 90012001500
Max.Ext. Kerb Width (mm)
900120015001800
Max.Ext. Kerb Length (mm)
900120015001800
RooflightWeight (Kg)
54 87127177
GlazingPitch * (Degrees)
45454545
*Note: Standard pitch is 45º; A 10º - 45º glazing pitch can be specified on a non standard Rooflight. Please contact Customer Service on 01993 833143, 833117, 833136.
Maximum External Kerb Width
Internal Kerb Width
Maxim
um External Kerb Length
Internal Kerb Length
Max. Kerb Thickness
Kerb Height150mm Min
Existing Flat Roof
Model
pl600pl900pl1200pl1200x600pl1200x900pl900x600
Max.Kerb Thickness (mm)
150150150150150150
Internal Kerb Width (mm)
600 900120012001200 900
Internal Kerb Length (mm)
600 9001200 600 900 600
Max.Ext. Kerb Width (mm)
90012001500150015001200
Max.Ext. Kerb Length (mm)
90012001500 9001200 900
Note: The above dimensions are examples of models which can be achieved. Please contact Specials Dept on 01993 833143, 833117, 833136.
Kerb Layout for Plateau, Pyramid and Lantern Rooflights
the Pyramid Rooflight
the Lantern Rooflight
the Polyedge Rooflight
the Plateau Rooflight
the Walk On Rooflight
the Added Security Rooflight
The above dimensions are examples of models which can be achieved. Please contact our Customer Service Department to discuss your requirements on 01993 833143, 833117, 833136.
Please contact 01993 833143, 833117, 833136 to discuss specification details and options available.
Please contact 01993 833143, 833117, 833136 to discuss specification details and options available.
PY01
Internal KerbWidth (mm)
Internal KerbLength (mm)
Internal Kerb Length (mm)
900
900
600
600
1200
1200
1500
1500
PY02
PY03
PY04
External Kerb Length (mm)
Kerb Height 150mm min.
Max. Kerb Thickness
Existing Flat Roof
Standard glazing pitch is 45º
External Kerb WidthInternal Kerb Width
the
Secu
red
by D
esig
n R
oofli
ght
20
The Secured by Design Rooflight. For more information visit: www.therooflightcompany.co.uk/case-studiesThe Secured
by Design Rooflight
the Secured by Design R
ooflight
21
A rooflight suitable for roofs between 3° and 5°.
For buildings where security is paramount, the Secured by Design Rooflight is the first rooflight to be Secured by Design accredited to Loss Prevention Standard 1175-6 Level 3.
Features include:
• Standard Double glazing includes outer pane conforming to CAT P6B BSEN356 combined with a low u-value• Glazing options include obscure glass• Fixed shut stainless steel frame• Maximum security and anti-glare glazing options• Optional coated stainless intruder security bars• Available in white, black, light and dark grey or any RAL colour.
The Keep
The Keep is a new-build historical research centre in Falmer, Brighton. The building has been designed to be used by the general public or educational groups within the community. The project started in 2011 and opened in June 2013.
The architects wanted to design a modern building which combined latest technologies. As well as high security elements such as solar panels and solar heating, thick walls and a biomass boiler were used so the so that the final building would be certified as a BREEAM Excellent Building.
Due to the nature of the content held within the building, the architect wanted to specify rooflights which would provide maximum security to the building. The Rooflight
Company were the only manufacturer manufacturer that Atkins Architects could find which offers Secured by Design.
“Kier worked with the rooflight company for over two years on this project as they were able to meet the specific brief of high security rooflights required. They offered a rooflight solution which matched the security levels needed for the building which no other manufacturer can supply.”
Kier, Main Contractors
A total of ten Secured by Design Rooflights were supplied to this scheme, measuring 1225mm x 1225mm and in jet black.
The Secured by Design Rooflight
The Secured by Design Rooflight
the
Secu
red
by D
esig
n R
oofli
ght
22
The Secured by Design Rooflight Cross SectionA A
SEC
TIO
N A
-A
SCAL
E 1
: 20
B
DET
AIL
B SC
ALE
1 : 5
Con
cret
e ro
of d
eck
Scre
ed (I
f not
cut
to fa
lls)
Insu
latio
n
Roo
f cov
erin
g
Rei
nfor
ced,
pou
red
conc
rete
ker
b(3
0N/m
m2 (C
20/2
5) C
oncr
ete)
Cei
ling
supp
ort b
atte
nsPl
aste
r boa
rd c
eilin
g
Batte
n
Insu
latio
n
Plas
ter b
oard
Tim
ber b
atte
n(s
ecur
ely
fixed
ove
r roo
fligh
tfix
ing
poin
ts)
Roo
fligh
t fix
ing
poin
t
Ther
mol
iner
®
(The
rmal
-dec
oupl
ed li
ning
.Fa
ctor
y fit
ted)
Secu
red
by D
esig
n Pl
atea
u
Vapo
ur c
ontro
l lay
er(D
ress
ed in
to T
herm
olin
er®)
Silic
one
bead
(Low
mod
ulus
neu
tral c
ure)
Raw
lbol
t® S
hiel
d An
chor
M10
10L
Pro
duct
Cod
e: 4
4-10
5(In
stal
l as
per m
anuf
actu
res
Det
ails
)Util
ise
all f
ixin
g po
ints
.Fi
s su
pplie
d w
ith R
oofli
ght.
Plea
se N
ote:
This
is a
dia
gram
mat
ical
re
pres
enta
tion.
Som
e co
mpo
nent
s ha
ve b
een
incr
ease
d in
sca
le fo
r cl
arity
.Thi
s is
the
reco
mm
ende
d in
stal
latio
n in
to a
con
cret
e sl
ab ro
of,
the
suita
bilit
y fo
r the
spe
cific
ap
plic
atio
n w
ill ne
ed to
be
conf
irmed
by
the
proj
ect e
ngin
eer.
the Secured by Design R
ooflight
23
The Secured by Design Rooflight Sizes
SBD01 SBD07 SBD08
Internal Kerb Width (mm)
900
900
600
600
1200 1400 1500 2000
1200
Internal Kerb Length (mm)
1400
SBD02 SBD09
SBD03
Bespoke 1400 Bespoke 2000x1400
External Kerb Length
External Kerb Width
Internal Kerb Length Internal Kerb Width
Kerb Height 150mm min.
Max. Kerb Thickness
Existing Flat Roof
600x600mm
900x600mm
1200x600mm
900x900mm
1200x900mm
1200x1200mm
1500x900mm
1500x1200mm
1400x1400mm
2000x1400mm
£45
£45
£45
£45
£45
£45
£45
£45
£45
£45
£212
£249
£292
£286
£324
£362
POA
POA
POA
POA
£298
£298
£298
£327
£327
£334
POA
POA
POA
POA
Added Security FeaturesAdded Security Sizes and Prices
Size (w x l)
SBD01
SBD07
SBD08
SBD02
SBD09
SBD03
SBD10
SBD11
Bespoke 1400
Bespoke 2000x1400
Code P6B P7B P8B Cover
£1334
£1748
£2162
£2369
£2991
£3820
£3612
£4648
£5016
£6950
SBD L2 PL01
SBD L2 PL07
SBD L2 PL08
SBD L2 PL02
SBD L2 PL09
SBD L2 PL03
SBD L2 PL10
SBD L2 PL11
L2 Bespoke 1400
L2 Bespoke 2000x1400
SBD L3 PL01
SBD L3 PL07
SBD L3 PL08
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
£1606
£1927
£2386
L2 Approved L3 ApprovedBars
Glass Options Additional Security Options Secured by Design Accredited
SecurityHinges Cover
SBD L2 01
SBD L2 07
SBD L2 08
SBD L2 02
SBD L2 09
SBD L2 03
SBD L2 10
SBD L2 11
L2 Bespoke 1400
L2 Bespoke 2000x1400
SBD L3 01
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
£1590
L2 Approved L3 ApprovedBars
Additional Security Options Secured by Design Accredited
12345678910
12345678910
1 2 3
4 5
SBD10
SBD11
6
7
8
109
SBD01
SBD07
SBD08
SBD02
SBD09
SBD03
SBD10
SBD11
Bespoke 1400
Bespoke 2000x1400
Code
£1001
£1173
£1466
£1666
£1900
£2409
POA
POA
POA
POA
£1030
£1215
£1520
£1727
£1981
£2514
POA
POA
POA
POA
£1060
£1256
£1575
£1789
£2061
£2621
POA
POA
POA
POA
£47
£47
£47
£47
£47
£47
£47
£47
£47
£47
£222
£262
£307
£301
£340
£380
POA
POA
POA
POA
£313
£298
£313
£343
£343
£351
POA
POA
POA
POA
£1318
£1660
£2106
£2460
£2995
£3970
£3555
£4880
£5141
£7124SBD01 SBD07 SBD08
Internal Kerb Width (mm)
900
900
600
600
1200 1400 1500 2000
1200
Internal Kerb Length (mm)
1400
SBD02 SBD09
SBD03
Bespoke 1400 Bespoke 2000x1400
External Kerb Length
External Kerb Width
Internal Kerb Length Internal Kerb Width
Kerb Height 150mm min.
Max. Kerb Thickness
Existing Flat Roof
600x600mm
900x600mm
1200x600mm
900x900mm
1200x900mm
1200x1200mm
1500x900mm
1500x1200mm
1400x1400mm
2000x1400mm
£45
£45
£45
£45
£45
£45
£45
£45
£45
£45
£212
£249
£292
£286
£324
£362
POA
POA
POA
POA
£298
£298
£298
£327
£327
£334
POA
POA
POA
POA
Added Security FeaturesAdded Security Sizes and Prices
Size (w x l)
SBD01
SBD07
SBD08
SBD02
SBD09
SBD03
SBD10
SBD11
Bespoke 1400
Bespoke 2000x1400
Code P6B P7B P8B Cover
£1334
£1748
£2162
£2369
£2991
£3820
£3612
£4648
£5016
£6950
SBD L2 PL01
SBD L2 PL07
SBD L2 PL08
SBD L2 PL02
SBD L2 PL09
SBD L2 PL03
SBD L2 PL10
SBD L2 PL11
L2 Bespoke 1400
L2 Bespoke 2000x1400
SBD L3 PL01
SBD L3 PL07
SBD L3 PL08
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
£1606
£1927
£2386
L2 Approved L3 ApprovedBars
Glass Options Additional Security Options Secured by Design Accredited
SecurityHinges Cover
SBD L2 01
SBD L2 07
SBD L2 08
SBD L2 02
SBD L2 09
SBD L2 03
SBD L2 10
SBD L2 11
L2 Bespoke 1400
L2 Bespoke 2000x1400
SBD L3 01
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
£1590
L2 Approved L3 ApprovedBars
Additional Security Options Secured by Design Accredited
12345678910
12345678910
1 2 3
4 5
SBD10
SBD11
6
7
8
109
SBD01
SBD07
SBD08
SBD02
SBD09
SBD03
SBD10
SBD11
Bespoke 1400
Bespoke 2000x1400
Code
£1001
£1173
£1466
£1666
£1900
£2409
POA
POA
POA
POA
£1030
£1215
£1520
£1727
£1981
£2514
POA
POA
POA
POA
£1060
£1256
£1575
£1789
£2061
£2621
POA
POA
POA
POA
£47
£47
£47
£47
£47
£47
£47
£47
£47
£47
£222
£262
£307
£301
£340
£380
POA
POA
POA
POA
£313
£298
£313
£343
£343
£351
POA
POA
POA
POA
£1318
£1660
£2106
£2460
£2995
£3970
£3555
£4880
£5141
£7124
the
Adde
d Se
curit
y R
oofli
ght
24
The Added Security Rooflight, St Peter’s School in Gloucestershire. For the full case study visit:www.therooflightcompany.co.uk/case-studies
the Added Security Rooflight
the Added Security Rooflight
25
The Added Security Rooflight A rooflight suitable for roofs between 3° and 5°.
For buildings where security is paramount but where the Secured by Design accreditation is not necessary , the Added Security Rooflight is available with a choice of specification.
Features include:
• A flexible menu of Added Security options to meet the specific needs of your project including openable rooflights, combining aesthetics and security• Glazing options include CAT P6B BS EN 356 with bonded interlayer, reducing risk of intrusion• Tamper proof hinges and security bars• Optional protective glazing perimeter guard to increase security• Bespoke design service readily available • Linked sensors to fire alarm systems• Low profile casement standing only 95mm above kerb height• Available in white, black, light and dark grey or any RAL colour.
St Peter’s Catholic Primary School is a newbuild project in Gloucester. The original school has been demolished to make way for a modern building that is light and airy with open spaces replacing cramped, dark corridors and internal classrooms being joined to outdoor learning areas.
Each corridor space is flooded with natural light and ventilation through a total of 17 openable Plateau Rooflights. Two of these rooflights are linked together to create a large expanse of light, and one rooflight is a large bespoke array spanning 12m long by 1m wide.
“We put a lot of investment into the roof as the client wanted to maximise commodities such as natural light and air, and by using large rooflights this is achieved. It is widely accepted that concentration levels are improved when light and fresh air is available and this is vital in a school environment. The Rooflight Company designed a rooflight that was
12m long and 1m wide – this is not something we could achieve elsewhere. We also wanted to open the rooflights as wide as possible and the system provided allowed us to do this.
The Rooflight Company enabled us to have the added security features such as tamper proof hinges without having bars across the glazing which we felt would compromise aesthetics, light and shadow.”
Architect: Rob Tadman – Fielden Clegg Bradley Studios Schools are vulnerable buildings and the local Crime Prevention Officer was involved in the project, wanting to ensure that added security methods were put in place to prevent unauthorised access via the roof. In addition, each rooflight has been fitted with tamper proof fittings.
The rooflights are also connected to the building management system with rain sensors, ensuring that the rooflights automatically close in bad weather conditions.
St Peter’s Catholic Primary School
the
Adde
d Se
curit
y R
oofli
ght
26
41.5
0 (F
rom
insi
de fa
ce o
f st
ruct
ural
ker
b to
vie
wab
le)
View
able
wid
thSt
ruct
ural
wid
th
910
1112
9b4b
151 1d 1e 5
67
414
12b
6b2
2c3
13
150
max
imum
ke
rb w
idth
41.
50 41
.50
(from
insi
de fa
ce o
f
stru
ctur
al k
erb
to v
iew
able
)
Stru
ctur
al k
erb
leng
th
1 1e 2d
1b
5
6b
1d
910
12
9b
1315
76
314
42c
2b
12c
4b
41.
50
41.5
0 (fr
om in
side
face
of
stru
ctur
al k
erb
to v
iew
able
)
150
Min
imum
ke
rb h
eigh
t
150
Max
imum
ke
rb w
idth
3- 5
Min
imum
fall
to
prev
ent w
ater
poo
ling
View
able
leng
th
Stru
ctur
al k
erb
leng
th
1
1e 1c 5
6b
1d
2b2c
314
46
7
1315
89b
1210
912
c
4b
View
able
leng
th
Plea
se N
ote:
Thes
e se
ctio
nal d
etai
ls a
re
prov
ided
as
an in
stal
latio
n su
gges
tion.
Due
to th
e di
fferin
g na
ture
of i
nsta
llatio
ns w
e st
rong
ly
advi
se y
ou to
con
sult
'Rol
led
Lead
She
et -
The
Com
plet
e M
anua
l' pub
lishe
d by
The
Lea
d Sh
eet A
ssoc
iatio
n (w
ww
.lead
shee
t.co.
uk) a
nd y
our
roof
win
dow
inst
alle
r to
verif
y fit
ness
for p
urpo
se.
This
dra
win
g do
es n
ot c
onst
itute
a s
truct
ural
pr
opos
al.
Suffi
cien
cy o
f st
ruct
ural
sup
ports
to b
e ch
ecke
d by
roof
win
dow
pur
chas
er's
stru
ctur
al c
onsu
ltant
.
Scal
e - m
m
300
200
100
0
Key
:1.
The
Pla
teau
Roo
fligh
t, w
ith M
anua
l Ope
ning
Opt
ion
1b fi
xed
to s
truct
ural
ker
b 2c
usi
ng c
oach
bol
ts fi
xed
thro
ugh
fixin
g lu
gs 1
c ar
ound
the
perim
eter
of t
he ro
of w
indo
w.
2. S
truct
ural
rafte
r sup
port
at ja
mb
and
stru
ctur
al tr
imm
er s
uppo
rt at
hea
d an
d ci
ll 2b
. Stru
ctur
al k
erb
upst
and
2c to
be
a m
inim
um
of 1
50m
m h
igh.
Iron
mon
gery
sup
porti
ve p
acke
r 2d
at th
e ci
ll, fi
tted
arou
nd th
e fix
ing
lugs
.3.
WBP
Ply
woo
d ro
of d
eck.
4. In
sula
tion
fitte
d ab
ove
stru
ctur
al s
uppo
rts a
nd a
roun
d th
e pe
rimet
er o
f the
ker
b up
stan
d 4b
.5.
Tim
ber r
evea
l to
alig
n w
ith th
e ro
of w
indo
w li
ning
s 1d
to p
rovi
de 'f
ram
eles
s' in
tern
al a
ppea
ranc
e. If
the
roof
win
dow
lini
ngs
are
not a
lread
y fa
ctor
y pa
inte
d, 1
d M
UST
BE
PAIN
TED
with
a ti
mbe
r fin
ishi
ng p
aint
onc
e th
e ro
of w
indo
w is
inst
alle
d to
en
sure
long
evity
of t
his
com
pone
nt.
6. P
last
erbo
ard
linin
g w
ith p
last
erbo
ard
stop
6b
to p
rote
ct th
e co
rner
. Pla
ster
boar
d fit
ted
behi
nd th
e th
erm
olin
er o
f the
roof
w
indo
w 1
e.7.
Pla
ster
ski
m.
8. A
ngle
d pa
cker
to d
efle
ct w
ater
aro
und
the
head
of t
he k
erb
upst
and
and
prev
ent w
ater
poo
ling.
9.
Stru
ctur
al b
oard
s in
stal
led
abov
e in
sula
tion
and
arou
nd th
e pe
rimet
er o
f the
ker
b up
stan
d 9b
.10
. Und
erla
y.11
. Sof
twoo
d ro
ofin
g ba
ttens
.12
. Lea
d sh
eet r
oofin
g. R
olls
12b
to ru
n w
ith th
e an
gle
of R
oof p
itch,
and
spl
ay 1
2c a
t lea
st 1
50m
m fr
om th
e ke
rb u
psta
nd to
allo
w w
ater
to fl
ow fr
eely
aro
und
the
perim
eter
and
pre
vent
wat
er p
oolin
g. R
un th
e m
ain
shee
t up
the
kerb
ups
tand
.13
. WBP
ply
woo
d pa
cker
s.14
. Vap
our b
arrie
r15
. Per
imet
er s
ilicon
e se
al.
Seal
per
imet
er o
f roo
f w
indo
w 1
JU
ST P
RIO
R T
O
inst
alla
tion,
usi
ng a
thic
k co
ntin
uous
bea
d of
low
m
odul
us n
eutra
l cur
e si
licon
e se
alan
t.
The Added Security Rooflight Cross Section
the Added Security Rooflight
27
The Added Security Rooflight Sizes
SBD01 SBD07 SBD08
Internal Kerb Width (mm)
900
900
600
600
1200 1400 1500 2000
1200
Internal Kerb Length (mm)
1400
SBD02 SBD09
SBD03
Bespoke 1400 Bespoke 2000x1400
External Kerb Length
External Kerb Width
Internal Kerb Length Internal Kerb Width
Kerb Height 150mm min.
Max. Kerb Thickness
Existing Flat Roof
600x600mm
900x600mm
1200x600mm
900x900mm
1200x900mm
1200x1200mm
1500x900mm
1500x1200mm
1400x1400mm
2000x1400mm
£45
£45
£45
£45
£45
£45
£45
£45
£45
£45
£212
£249
£292
£286
£324
£362
POA
POA
POA
POA
£298
£298
£298
£327
£327
£334
POA
POA
POA
POA
Added Security FeaturesAdded Security Sizes and Prices
Size (w x l)
SBD01
SBD07
SBD08
SBD02
SBD09
SBD03
SBD10
SBD11
Bespoke 1400
Bespoke 2000x1400
Code P6B P7B P8B Cover
£1334
£1748
£2162
£2369
£2991
£3820
£3612
£4648
£5016
£6950
SBD L2 PL01
SBD L2 PL07
SBD L2 PL08
SBD L2 PL02
SBD L2 PL09
SBD L2 PL03
SBD L2 PL10
SBD L2 PL11
L2 Bespoke 1400
L2 Bespoke 2000x1400
SBD L3 PL01
SBD L3 PL07
SBD L3 PL08
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
£1606
£1927
£2386
L2 Approved L3 ApprovedBars
Glass Options Additional Security Options Secured by Design Accredited
SecurityHinges Cover
SBD L2 01
SBD L2 07
SBD L2 08
SBD L2 02
SBD L2 09
SBD L2 03
SBD L2 10
SBD L2 11
L2 Bespoke 1400
L2 Bespoke 2000x1400
SBD L3 01
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
£1590
L2 Approved L3 ApprovedBars
Additional Security Options Secured by Design Accredited
123456789
10
123456789
10
1 2 3
4 5
SBD10
SBD11
6
7
8
109
SBD01
SBD07
SBD08
SBD02
SBD09
SBD03
SBD10
SBD11
Bespoke 1400
Bespoke 2000x1400
Code
£1001
£1173
£1466
£1666
£1900
£2409
POA
POA
POA
POA
£1030
£1215
£1520
£1727
£1981
£2514
POA
POA
POA
POA
£1060
£1256
£1575
£1789
£2061
£2621
POA
POA
POA
POA
£47
£47
£47
£47
£47
£47
£47
£47
£47
£47
£222
£262
£307
£301
£340
£380
POA
POA
POA
POA
£313
£298
£313
£343
£343
£351
POA
POA
POA
POA
£1318
£1660
£2106
£2460
£2995
£3970
£3555
£4880
£5141
£7124
SBD01 SBD07 SBD08
Internal Kerb Width (mm)
900
900
600
600
1200 1400 1500 2000
1200
Internal Kerb Length (mm)
1400
SBD02 SBD09
SBD03
Bespoke 1400 Bespoke 2000x1400
External Kerb Length
External Kerb Width
Internal Kerb Length Internal Kerb Width
Kerb Height 150mm min.
Max. Kerb Thickness
Existing Flat Roof
600x600mm
900x600mm
1200x600mm
900x900mm
1200x900mm
1200x1200mm
1500x900mm
1500x1200mm
1400x1400mm
2000x1400mm
£45
£45
£45
£45
£45
£45
£45
£45
£45
£45
£212
£249
£292
£286
£324
£362
POA
POA
POA
POA
£298
£298
£298
£327
£327
£334
POA
POA
POA
POA
Added Security FeaturesAdded Security Sizes and Prices
Size (w x l)
SBD01
SBD07
SBD08
SBD02
SBD09
SBD03
SBD10
SBD11
Bespoke 1400
Bespoke 2000x1400
Code P6B P7B P8B Cover
£1334
£1748
£2162
£2369
£2991
£3820
£3612
£4648
£5016
£6950
SBD L2 PL01
SBD L2 PL07
SBD L2 PL08
SBD L2 PL02
SBD L2 PL09
SBD L2 PL03
SBD L2 PL10
SBD L2 PL11
L2 Bespoke 1400
L2 Bespoke 2000x1400
SBD L3 PL01
SBD L3 PL07
SBD L3 PL08
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
£1606
£1927
£2386
L2 Approved L3 ApprovedBars
Glass Options Additional Security Options Secured by Design Accredited
SecurityHinges Cover
SBD L2 01
SBD L2 07
SBD L2 08
SBD L2 02
SBD L2 09
SBD L2 03
SBD L2 10
SBD L2 11
L2 Bespoke 1400
L2 Bespoke 2000x1400
SBD L3 01
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
L3 Not available in this size
£1590
L2 Approved L3 ApprovedBars
Additional Security Options Secured by Design Accredited
123456789
10
123456789
10
1 2 3
4 5
SBD10
SBD11
6
7
8
109
SBD01
SBD07
SBD08
SBD02
SBD09
SBD03
SBD10
SBD11
Bespoke 1400
Bespoke 2000x1400
Code
£1001
£1173
£1466
£1666
£1900
£2409
POA
POA
POA
POA
£1030
£1215
£1520
£1727
£1981
£2514
POA
POA
POA
POA
£1060
£1256
£1575
£1789
£2061
£2621
POA
POA
POA
POA
£47
£47
£47
£47
£47
£47
£47
£47
£47
£47
£222
£262
£307
£301
£340
£380
POA
POA
POA
POA
£313
£298
£313
£343
£343
£351
POA
POA
POA
POA
£1318
£1660
£2106
£2460
£2995
£3970
£3555
£4880
£5141
£7124
the
Poly
edge
Roo
fligh
t
28
the Polyedge Rooflight
The Polyedge Rooflight, Buckinghamshire. For more information visit: www.therooflightcompany.co.uk/case-studies
the Polyedge Rooflight
29
The Polyedge Rooflight A rooflight suitable for horizontal installation.
The Polyedge Rooflight is typically specified in classic and historic buildings but its sleek, steel lines are equally suited to modern architecture. The Hexagonal and Octagonal Polyedge Rooflights have been used to great effect on the case studies below. They benefit from the technical specification featured on page 6.
Stowe House, Buckinghamshire, Purcell Miller Tritton
The Rooflight Company provided twelve rooflights including this Octagon Rooflight for the extensive renovation of Stowe House in Buckinghamshire. This 18th Century building, home to a boarding school, is widely recognised as one of a hundred endangered sites of significance worldwide.
Owing to its unique nature, and because Stowe House is currently listed on their buildings at risk register, English Heritage worked in close consultation on the project.
Ventilation is easily achieved by means of an electric actuator.
The above dimensions are examples of models which can be achieved.
*Note: A 10º - 45º glazing pitch can be specifiedPlease contact our Bespoke Department on 01993 833143 / 833117 for information on prices for this product.
hex900Minimum Internal Width (mm)
Maximum Internal Width (mm)
Minimum Internal Width (mm)
Maximum Internal Width (mm)
Hexagonal Octagonal
Max. Ext. Kerb Width: 2300mm
Max. Ext. Kerb Width: 1200mm
Max. Ext. Kerb Width: 2300mm
Max. Ext. Kerb Width: 1200mm
External Kerb Length
Internal Kerb LengthKerb Height 150mm min.
Max. Kerb Thickness
hex2000
oct900
oct2000
The above dimensions are examples of models which can be achieved.
*Note: A 10º - 45º glazing pitch can be specifiedPlease contact our Bespoke Department on 01993 833143 / 833117 for information on prices for this product.
hex900Minimum Internal Width (mm)
Maximum Internal Width (mm)
Minimum Internal Width (mm)
Maximum Internal Width (mm)
Hexagonal Octagonal
Max. Ext. Kerb Width: 2300mm
Max. Ext. Kerb Width: 1200mm
Max. Ext. Kerb Width: 2300mm
Max. Ext. Kerb Width: 1200mm
External Kerb Length
Internal Kerb LengthKerb Height 150mm min.
Max. Kerb Thickness
hex2000
oct900
oct2000
Model
hex900 (min)hex2000 (max)oct900 (min)oct2000 (max)
Max.KerbThickness (mm)
150150150150
Internal Kerb Width (mm)
9002000 9002000
Max.Ext.KerbWidth (mm)
1200230012002300
Glazing Pitch(degrees)
20 degrees20 degrees20 degrees20 degrees
Maxim
um External Kerb W
idth
Internal Kerb WidthMax.Kerb
Thickness
Note: This framing is for hex. rooflights only
Kerb Height150mm Min
Existing Flat Roof
Model
pl600pl900pl1200pl1500*
Max.Kerb Thickness (mm)
150 150 150 150 150 150 150 150 150 150 150 150 150 150 150
Internal Kerb Width (mm)
600 90012001500 90012001200150015002000
600 900 90012001200
Internal Kerb Length (mm)
600 90012001500 600 600 900 90012001500
600 900 600 600 900
Max.Ext. Kerb Width (mm)
900120015001800120015001500180018002300
9001200120015001500
Max.Ext. Kerb Length (mm)
900120015001800 900 9001200120015001800
9001200 900 9001200
RooflightWeight (Kg)
39 62 89 121 48 57 69 80 95 135 39 62 900 9001200
*Note: pl1500 rooflights utilise 1 central glazing bar. Ironmongery can be found on p22-23. Note ironmongery required with escape. Plateaus to be installed on a 5º pitch. Open edge must be at lowest point for water drainage/run off.
Model
LT01LT02 LT03LT04LT05LT06
pl600x900pl600x1200pl900x1200pl900x1500pl1200x1500pl1500x2000*
pl600Accesspl900Accesspl600x900Accesspl600x1200Accesspl900x1200Access
Max.KerbThickness (mm)
150150150150150150
Internal KerbWidth (mm)
90012001200150015002000
Internal KerbLength (mm)
600 600 900 90012001500
Max.Ext.KerbWidth (mm)
120015001500180018002300
Max.Ext. KerbLength (mm)
900 9001200120015001800
RooflightWeight (Kg)
75 86112127162226
Glazing Pitch* (degrees)
454545454545
*Note: Standard pitch is 45º. A 10º - 45º glazing pitch can be specified on a non standard Rooflight. Please contact Customer Service on 01993 833143, 833117, 833136.
Model
PY01PY02PY03PY04
Max.Kerb Thickness (mm)
150150150150
Internal Kerb Width (mm)
600 90012001500
Internal Kerb Length (mm)
600 90012001500
Max.Ext. Kerb Width (mm)
900120015001800
Max.Ext. Kerb Length (mm)
900120015001800
RooflightWeight (Kg)
54 87127177
GlazingPitch * (Degrees)
45454545
*Note: Standard pitch is 45º; A 10º - 45º glazing pitch can be specified on a non standard Rooflight. Please contact Customer Service on 01993 833143, 833117, 833136.
Maximum External Kerb Width
Internal Kerb Width
Maxim
um External Kerb Length
Internal Kerb Length
Max. Kerb Thickness
Kerb Height150mm Min
Existing Flat Roof
Model
pl600pl900pl1200pl1200x600pl1200x900pl900x600
Max.Kerb Thickness (mm)
150150150150150150
Internal Kerb Width (mm)
600 900120012001200 900
Internal Kerb Length (mm)
600 9001200 600 900 600
Max.Ext. Kerb Width (mm)
90012001500150015001200
Max.Ext. Kerb Length (mm)
90012001500 9001200 900
Note: The above dimensions are examples of models which can be achieved. Please contact Specials Dept on 01993 833143, 833117, 833136.
Kerb Layout for Plateau, Pyramid and Lantern Rooflights
the Pyramid Rooflight
the Lantern Rooflight
the Polyedge Rooflight
the Plateau Rooflight
the Walk On Rooflight
the Added Security Rooflight
The above dimensions are examples of models which can be achieved. Please contact our Customer Service Department to discuss your requirements on 01993 833143, 833117, 833136.
Please contact 01993 833143, 833117, 833136 to discuss specification details and options available.
Please contact 01993 833143, 833117, 833136 to discuss specification details and options available.
Acce
ssor
ies
30
AccessoriesTo view the accessories on our website visit www.therooflightcompany.co.uk/accessories
Accessories
31
Ironmongery
Pole winders for rooflightsout of reach
Hand winders for rooflightswithin reach
Option K: Brass telescopic pole winder 150mm
Option D:Brass telescopicpole winder 300mm
Option L:Chrome plated telescopicpole winder 150mm
Option C:Chrome plated telescopicpole winder 300mm
Option M: Anodised aluminiumpole winder 300mm
Option T:Anodised aluminiumpole winder 500mm
Option P: Cord operated gear 300mm
Option A: Brass telescopichand winder 150mm
Option E: Brass telescopichand winder 300mm
Option J: Chrome plated telescopichand winder 150mm
Option B: Chrome plated telescopichand winder 300mm
Option W: Anodised aluminiumwheel on chrome platedhand winder 150mm
Option Y: Black wheel on brasshand winder 150mm
Note: Option U and S from previous brochures are no longer available.
Option C Chrome pole winder with option F pole. Option W Anodised hand winder.
Acce
ssor
ies
32
MotorsElectric linear actuators
MAC MOTOR
SUPERMASTER MOTOR
AU-Max
Option AU-Max Electric linear actuator 230v 300mm & 500mm
Option MAC MOTOR :230v, 24v 150mm only
Option SUPERMASTER MOTOR:230v, 24v 420 - 600mm
Electric rack actuators
Option Rack Electric linear actuator 230v, 24v 180-750mm
Option Double Rack* Electric linear actuator 230v, 24v 180mm
Option Dual Rack* Electric linear actuator 230v, 24v 180mm
* Please note a coupling rod is required to operate these motors
The selection of actuator depends on the rooflight size and application. Please discuss your specific requirements with Customer Service. Rain, Temperature and Smoke sensors are available on request. Please discuss your specific requirements with Customer Service.
An on/off switch is required for these products. Please ask for details
Poles - required to operate pole winders
Option F: Aluminium 1.0m length
Option G: Aluminium 1.5m length
Option H: Aluminium 2.0m length
Option I: Aluminium 1.75-3.0mtelescopic
Electric chain actuators
Option R with two Options M’s. A KA66 motor on a flat rooflight
A Rack Motor on a triangular rooflight.
33
Motor Suitability
The Pyramid Rooflight
PY01 •PY02 •PY03 •PY04 •
Model KA34-350 MAX Supermaster Rack Double Rack 24v 230v 230v/24v 230v/24v 230v/24v 350mm 300mm 420/600mm 180mm 180mm
The Lantern Rooflight
Model MAC Supermaster Dual Rack Double Rack
230v/24v 230v/24v 230v/24v 230v/24v
150mm only 420/600mm 180mm 180mm
LT01 • •
LT02 •
LT03 •
LT04 •
LT05 •
LT06 •
PL01 •PL02 • •PL03 • • PY08 • • PL09 • • PL10 • • PL11 • •
KA 34 (350mm stroke 300N) (24V)
KA 54 (350mm stroke 500N) (24V)
KA 34-K (350mm stroke 300N) (230V)
KA 54-K (350mm stroke 500N) (230V)
The AddedSecurityRooflight
PL01 •PL02 •PL03 • PY08 • PL09 • • PL10 •PL11 •
KA 34 -350 24v 350mm MAX 230v 300mm Rack 230v / 24v 180mm
The AddedSecurityRooflight
See
KA
Spe
cific
Cha
rt B
elow
.
The Added Security Rooflight KA Specific Options
The Added Security Rooflight
34
The Rooflight Company’s Project Portfolio
The Public, West Bromwich. Will Alsop Architects specified Bespoke Triangular Rooflights.
The Roundhouse, Derby. Maber Architects specified Bespoke Rooflight, Type A-Linked.
Castle Drogo, Devon. The Harrison Sutton Partnership specified a series of 900mm x 900mm Rooflights.
Yang Sing Hotel, Manchester. Roberta Fulford specified a series of Bespoke Conservation Rooflights® and Studio Rooflights.
York Way, London. McDonnell Associates specified a Bespoke Plateau measuring 600mm x 1800mm.
Week Farm, Devon. The Nicholas Dean Practice Specified a large Bespoke Conservation Rooflight®.
Our rooflights help architects create beautifully designed naturally lit environments. With nine aesthetically-pleasing rooflight ranges for both pitched and flat roof applications and an unrivalled bespoke design service, we are able to offer a solution to meet your requirements.
35
Broadclyst School, Devon. NPS South West specified neo™ Rooflights.
Residence, Kent. The client specified a series of neo™ Rooflights.
Clay Field, Suffolk. Riches Hawley Mikhail Architects specified these Bespoke neo™ Steel Rooflights for this RIBA award-winning housing scheme.
Somerset House, London. TGB Consult specified forty Bespoke Conservation Rooflights®.
Residence, Calne, Wiltshire. Watson, Bertram & Fell Architects specified this Bespoke 1.25m x 1.25m Lantern.
East Meon, Hampshire. The Artists Studio specified this large Bespoke Rooflight.
Our ranges cover both traditional and contemporary styles and suit all building types, from residential to commercial to public. This portfolio demonstrates just a few case studies worked on to date. For more information visit www.therooflightcompany.co.uk/case-studies.
36
Wychwood Business Centre
Milton Road
Shipton-under-Wychwood
OX7 6XU
Tel: 01993 833108
Fax: 01993 831066
email: [email protected]
www.therooflightcompany.co.uk
DisclaimerImages used in this Rooflight brochure are used for illustrative purposes only. All prices are correct at time of going to press. Due to occasional changes in product specification and material prices always check with the Rooflight Company Customer Services Department on 01993 833108 or online at www.therooflightcompany.co.uk for current prices prior to placing your order.
Designed and assembled in the UK.