Upload
civil142
View
21
Download
5
Embed Size (px)
Citation preview
Company profile
Geotechnical & Enviro
nmental
Infrastr
ucture - Civil E
ngineering
Residentia
l
Town Centre Development
Healthcare
RetailEducatio
n/Student Accommodatio
n
Hotel & Leisu
re
Commercial
Industrial &
Distrib
ution
Rodgers Leask Limited (Derby) Role Mill, 49 Canal Street, Derby DE1 2RJ
Tel: 01332 285000 Fax: 01332 291728
Email: [email protected]
Rodgers Leask Limited (London) 43 Friends Road, Croydon CRO 1ED
Tel: 020 86048721 Fax: 020 86048722
Email: [email protected]
www.rodgersleask.co.uk
Contacts
RODGERS LEASK COMPANY PROFILE
Rodgers Leask Company ProfileContents
Introduction
History and Development
Engineering Services
Company Philosophy and Quality Assurance
Recent and Current Projects Industrial and Distribution Commercial
Offices Multi-Site Data Centre
Hotel and Leisure Education/Student Accommodation Retail Healthcare Town Centre Development Residential Infrastructure Geotechnical and Environmental
Computer Aided Design and Detailing
Appendix Appendix I - Quality Policy Appendix II - CPD and Training Appendix III - Professional Indemnity Appendix IV - Health and Safety Policy
CONTENTS
Rodgers Leask Company ProfileIntroduction
History and Development
The founder of the company, John Rodgers, had a glittering football history and in the 1960s he played as right-back for SheffieldUnited.FollowinghisfootballcareerJohnstartedJohnRodgersandAssociatesin1984andinthatsameyearwasjoinedbyAndyLeask.In1989RodgersLeask’sDerbyofficewasformed.
DuetotheamountofworkbeingundertakeninLondonRodgersLeaskopenedaLondonofficeinJanuary2001andthroughfurtherexpansionmovedthisofficetoCroydonwhereithascontinuedtogofromstrengthtostrength.
1. 2. 3.
ThiscompanyprofilehasbeenproducedtodemonstrateRodgersLeask’sexpertiseascivil,structural,environmental and geotechnical consulting engineers.
Rodgers Leask’s head office is located at Role Mill, 49 Canal Street, Derby.
Other offices are located at 43 Friends Road, Croydon
In excess of forty staff located over the two sites can provide the highest quality of service to suit the requirements of clients throughout the construction industry.
This profile includes an overview of the following sectors including examples of recent and current projects:
Industrial and Distribution
Commercial
Offices
Multi-Site
Data Centre
Hotel and Leisure
Education/Student Accommodation
Retail
Healthcare
Town Centre Development
Residential
Infrastructure
Geotechnical and Environmental
RODGERS LEASK COMPANY PROFILE INTRODUCTION
Rodgers Leask Company ProfileEngineering Services
1. 2. 3.
Engineering Statement
Rodgers Leask aims to provide the highest possible personal service, appropriate design and advice for clients. It is important to the company that it works closely with other design team members to ensure that economic designs are achieved, which meet all the clients requirements.
A strength of the company is its commitment to team work both externally and internally. A Director will be responsible for the project and will be directly involved with the project throughout assisted by a Regional Director/Team Leader, who will be responsible for the design team working on the project.
Engineering Statement
Rodgers Leask has broad expertise covering the structural design of buildings in the majority of the construction industry. Their expertise extends to the following:
Full structural engineering services covering all types of buildings.
Detailed calculation and design of all types of construction using industry standard software.
Production of project drawings and schedules using AutoCAD and third party applications.
Design of large single and multi span structures.
Refurbishment to new and old buildings including complicated listed buildings.
Detailed structural surveys of old and existing buildings.
Our Civil engineering department also offers unrivalled expertise in all sectors of the construction industry delivering:
Civil engineering design covering roads, drainage and all types of infrastructure both on and off site (S278, S38 highways work and S104 drainage work)
Ground modelling / earthworks calculations using MX/PDS
Storm water sewer design, simulation modelling, balancing facilities and control chambers, checking for compliance with EA / Drainage Authority requirements
In addition there is a dedicated geotechnical and environmental department (Rodgers Leask Environmental) providing:
Geotechnical and environmental investigations and testing.
Foundation solutions and ground improvement recommendations.
Site remediation strategies.
Factual and interpretative site investigation reports.
Qualitative Risk Assessment (QRA).
CostBenefitAnalysis(CBA).
RODGERS LEASK COMPANY PROFILE ENGINEERING SERVICES
Rodgers Leask Company ProfileEngineering Services
Engineering ServicesCivil and Structural
Highways and Infrastructure
Geotechnical and Environmental
Site Remediation
Water and Flood Risk
Conservation and Refurbishment
Sectors / ExperienceIndustrial
Distribution
Car Parks
Car Showrooms
Environmental Engineering
StructuralSurveys/Investigations/Underpinning
Student Accommodation
Training Centres
Commercial-Offices,Multi-site,DataCentres
Leisure - Health Centres / Swimming Pools / Multiplex Cinemas / Stadia
Hotels
Education-Schools/Colleges/Universities
Retail - Retail Parks / Shopping Centres/Department Stores
Healthcare - Hospitals / Care Centres / Surgeries
Town Centre Development
Refurbishment - Industrial / Commercial / Residential and Conservation
High and Low Rise Residential
Rail
Social Housing
RODGERS LEASK COMPANY PROFILE ENGINEERING SERVICES
Rodgers Leask Company ProfileCompany Philosophy and Quality Assurance
Company Philosophy
Rodgers Leask places great emphasis on the importance of client focus. It is vitally important that Rodgers Leask has a high awareness of its clients needs and look at the longer term when developing working relationships. In addition, great emphasis is put on establishing the project team from the outset. It is always the desire to be involved at the earliest possible stage of any project so that the company can provide the necessary engineering advice to help the client and the other members of the team.
On all projects, both minor and major, it is vitally important that the scheme is approached with an open mind thus assuring that all alternatives are examined at the cost plan stage. Value engineering should be used at every stage of the project. Throughout the company the attitude is one to provide a fast response with the quality of service and awareness of the necessity to design with economy.
Through close relationships with specialist designers and trade contractors Rodgers Leask is able maintain its position at the forefront of the construction industry and involvement in up to the minute new developments.
Quality Assurance
Rodgers Leask is a BS ISO 9001:2000 registered company and takes the role of Quality Assurance within the construction sector very seriously. The company has quality procedures in place to guide and assist all our
employees in providing a quality service to all our clients. Through our quality procedures we strive to provide detailed, accurate and cost effective information, working closely with clients in respect of Quality Assurance. Wehaveincludedcopiesofourqualitypolicyandregistrationcertificateonthefollowingpages.
RODGERS LEASK COMPANY PROFILE COMPANY PHILOSOPHY AND QUALITY ASSURANCE
RODGERS LEASK COMPANY PROFILE INDUSTRIAL & DISTRIBUTION
Rodgers Leask Company ProfileIndustrial & Distribution
Extensive experience has been gained over many years from working with major clients in both industrial and distribution facilities. The range of work undertaken is from specialist pharmaceutical production operations to heavy industrial foundries.
We have completed in excess of ten million square feet of industrial, manufacturing and distribution buildings
Current and recently completed projects include:
1. The Hub Location: Central Birmingham
Project size: 1.6 million sq. ft. / 90 acres Client: Opus Land Ltd/Frontier Estates Ltd Value: £80m
£150m development in central Birmingham consisting of various sized units with cumulative total of 1.6 million sq. ft.
2. Barton Rail Depot Location:
Project size: Client: Bombardier Transportation Value: £28m
Multi-bay steel framed structure. Reinforced concrete maintenance pits
3. Opus Nine Location: Junction Nine M6
Project size: Client: Opus Land Ltd Value: £18m
Proposed site redevelopment adjacent to junction 9 of M6 incorporating distribution centres and commercial developments.
4. Unipath Headquarters Location: Bedford
Project size: Client: Unipath Value: £13m
NewheadquartersatBedfordUnipathincludingresearch and development, production and warehousing.
5. Hamilton Industrial Estate Location: Leicester
Project size: 350,000 sq. ft Client: Wilson Bowden Properties Ltd Value: £10m
Over 350,000 sq. ft. of industrial units.
6. Hay Distribution Centre Location: Dove Valley Park, Derby
Project size: 250,000 sq. ft. Client: Hays Distribution Value: £7m
Distributioncentreandofficecomplex, comprising multi-bay steel framed structure.
1. 3. 4.
7. Amcor Flexibles Location: Ilkeston
Project size: 250,000 sq. ft. Client: Amcor Flexibles Value: £5.0m
Installation of printing presses, extruders silos, incinerator, extension to extrusion hall, extension to ink store at Digby St, Ilkeston.
8. Jacobs Biscuits Distribution Location: Meridian Business Park
Project size: 1.6 million sq. ft. / 90 acres Client: Jacobs Biscuits Value: £4.0m
High bay distribution 18m to eaves.
9. Dove Valley Park Location: Dove Valley Park, Derby
Project size: 150,000 sq. ft. Client: Dove Park Ltd. Value: £4.0m
150,000sq.ft.distributionwarehouseandoffices. Steel framed structure.
10. Royal Mail Sorting Office Location: Meridian, Leicester
Client: Wilson Bowden Developments Ltd Value: £4.0m
New sorting facility at Meridian, Leicester for Royal Mail. Steel framed building with loading bays.
11. Pets at Home Location: Stoke on Trent
Project size: 160,000 sq. ft. Client: Pets at Home Value: £3.25m
New distribution centre utilising high bay racking and precast dock leveller access.
12. Aida Bliss Location: Derby
Client: Aida Bliss Value: £3.0m
Steel framed production building with deep pit and highly loadedfloorslabinDerby.
13. Bluestone Plc Location: Stoke on Trent
Project size: 100,000 sq. ft. Client: Bluestone Plc Value: £3.0m
New distribution centre in Stoke on Trent 100,000 sq. ft. steel framed structure on piled foundations.
14. West Distribution Location: Ilkeston
Project size: 50,000 sq. ft. Client: West Distribution Value: £2.5m
High bay distribution warehouse. A steel framed structure on a dynamically compacted site.
Rodgers Leask Company ProfileIndustrial & Distribution (CONTINUED)
RODGERS LEASK COMPANY PROFILE INDUSTRIAL & DISTRIBUTION
6. 15.
15. ProLog - Manton Wood Location: Manton Wood Enterprise Development Park
Project size: 68,000sq.ft.floorspace Client: ProLog Development Value: £2.4m
Newdistributioncentrewithmezzaninefloorlevel.
16. IMI Nuclear Location: The Hub, Birmingham
Project size: 60,000 sq. ft. Client: IMI Nuclear Value: £2.3m
New production and distribution building consisting of twin bay portals with central hit and miss columns.
17. Lubrizol Location: The Hub, Birmingham
Project size: 60,000 sq. ft. Client: Lubrizol International Ltd Value: £2.2m
New industrial laboratories for petrochemical manufacturer. Structures consist of steel framed or traditional load bearing masonry buildings and special plant.
18. Sidlaw Packaging Location: Ilkeston
Project size: 60,000 sq. ft. Client: Sidlaw PackagingUK Value: £2.0m
ReconstructionofmanufacturingfacilityafterfireatCrompton Road, Ilkeston
19. Aida Bliss Location: Derby
Client: Aida Bliss Value: £1.7m
Extension to existing press production facility comprising of 4m deep pit within structure constructed using piles and insitu concrete designed to suit dynamic loadings.
20. Reckitt & Coleman Location: Derby
Client: Reckitt & Coleman Value: £0.65m
Distribution centre extension at aerosol facility in Derby. Additional covered loading bay and tank farm extension completed the project.
21. Acordis Location: Derby
Client: Acordis Value: £0.6m
Filter Tow Expansion - new press base and power pack roomforcigarettefiltermanufacturerinDerby
Rodgers Leask Company ProfileIndustrial & Distribution (CONTINUED)
RODGERS LEASK COMPANY PROFILE INDUSTRIAL & DISTRIBUTION
16. 16.
Rodgers Leask Company ProfileCommercial Offices
Rodgers Leask has been involved in the design of new office buildings, call centres, car showrooms and have a particular strength in the refurbishment of both new and old buildings. Contracts where numerous national sites require similar design input such as service stations and retail units have also been undertaken.
Designs have been undertaken using both structural steelwork and reinforced concrete. A number of office designs have encompassed a green approach with the aim to provide sustainable energy. Projects include:
1. TRW Site, Solihull Location: Solihull
Project size: 350,000 sq.ft. Client: Fropus Ltd Contract cost: £30.0m
A business park for Fropus Ltd at the TRW site, Solihull. Adevelopmentofaround350,000sq.ft.ofofficesin30,000sq ft units
2. Bromsgrove Business Park Location: Bromsgrove
Client: Wrenbridge Land Development Ltd Contract cost: £25.0m
Seriesof300,000sq.mtr.officedevelopments(prelim.concept)
3. Meridian Business Park Location: Meridian Business Park
Client: Wilson Bowden Developments Contract cost: £8.0m
Meridian Business Park Commercial Section. 15 no. 2/3/4 storeyofficeblocks
4. Unipath Headquarters Location: Bedford
Client: Wilson Bowden Developments Contract cost: £7.5m
HeadquartersforUnipathatBedfordPrestigeofficesandfactory.
5. Prudential Call Centre Location: Pride Park, Derby
Client: St Modwen Developments Contract cost: £7.5m
Vibro-compacted site on old tip. Large span steel frame with curved roof.
6. Borough High Street Location: Southwark
Client: El Da Management Contract cost: £7.0m
Nine storey, steel framed building Borough High Street, Southwark. Basement & ground levels retail, 3 levels of offices,4levelsofresidential.
5.
RODGERS LEASK COMPANY PROFILE COMMERCIAL
4.
7. AEAT Technology Location: Pride Park, Derby
Client: AEAT Technology Contract cost: £6.5m
Four-storeyofficeblockdevelopment.Masonrycladsteelframedstructurewithprecastconcretefloorplate.
8. Wythenshawe, Manchester Location: Manchester
Client: St Modwens Contract cost: £6.5m
RefurbishmenttoexistingofficesandshoppingcentreinWythenshawe, Manchester.
9. Malvern Science Park Location: Malvern
Client: Malvern Science Park Contract cost: £5.7m
3-4 storey steel framed termo-deck unit ‘green building’
10. Glasshouse Street, Nottingham Location: Glasshouse Street, Nottingham
Size: 50,000 sq. ft. Client: Avalon Developments Contract cost: £5.0m
Newreinforcedconcreteframeofficeswithbasementcarparking.
11. ABC Cinema, Nuneaton Location: Bermuda Business Park, Nuneaton.
Client: ABC Cinemas Contract cost: £4.8m
New multiplex cinema on Bermuda Business Park, Nuneaton. The structure utilized precast terrace units to provide a stepped solution to the structure.
12. Rolls Royce Location: Derby
Client: Rolls Royce plc Contract cost: £3.0m
Two storey, steel framed computer building.
13. Wilson Bowden Head Office Location: Derby
Client: Wilson Bowden Contract cost: £2.6m
Headofficesformajordeveloperonnewsitecomprisingof3storeysteelframewithconcretefloorsandglazedcentralatrium reception.
14. Sir Frank Whittle Road Location: Derby
Client: Birch Developments Contract cost: £1.8m
OfficedevelopmentatSirFrankWhittleRoad,Derby
15. Alliance & Leicester, Leeds Location: Leeds City Centre
Client: Helical Retail Contract cost: £1.3m
Refurbishment of existing listed structure in Leeds city centre for conversion to Alliance & Leicester Building Society.
16. Barclays, Derby Location: Derby
Client: Birch Developments Contract cost: £1.2m
OfficesforBarclaysBankatDerby
Rodgers Leask Company ProfileCommercial Offices (CONTINUED)
RODGERS LEASK COMPANY PROFILE COMMERCIAL
11.7.
17. Menzies Hotels, Headquarters Client: Menzies Hotels
Contract cost: £1.1m
New corporate headquarters for hotel chain in woodland surroundings
18. The Postbox, Birmingham Location: Birmingham City Centre
Client: Cala Homes Contract cost: £22.0m
Upto5storeysofapartmentsovercommercialunitsatgroundfloorlevel,withbasementcarparking.Concreteframedbuildingwithflatslabs.
19. Hoxton Square Location: London
Client: Millennium Lofts Contract cost: £4.0m
Apartments over commercial units at ground and basement levels on a very tight site. New build steel framed and refurbishment, alteration of existing load bearing masonry.
20. Borough High Street Location: Southwark
Client: El Da Management Contract cost: £7.0m
Fourfloorsofapartments,twofloorsofofficesovercommercialunitsatgroundandbasementlevelsondifficultsite with limited access. Steel framed structure with insitu concretefloorslabs.Archaeologicaldigcarriedout,complexparty wall issues, part retained façade and Northern Line tunnel at front boundary.
21. Deptford & Blackheath Road Location: Deptford and Blackheath Road, London
Client: St James Contract cost: £10.0m
Several apartments blocks, up to 10 storeys with 2 levels of basementcarparking.Concreteframedbuildingwithflatslabs.
22. Hucknall Road Location: Nottingham
Client: Persimmon Homes Contract cost: £3.0m
Conversionofformerofficebuildingintoapartmentsatupperlevels,withcommercialunitsatgroundfloorandbasementlevels.
Rodgers Leask Company ProfileCommercial Offices (CONTINUED)
RODGERS LEASK COMPANY PROFILE COMMERCIAL
9. 20.18.
RODGERS LEASK COMPANY PROFILE COMMERCIAL MULTI-SITE
1. Herron Garage Properties Client: Herron Garage Properties
Contract cost: £0.5m
Design and detail of shops, canopy and car washes for petrolfillingstationslocatedintheMidlandsandtheNorth of England.
Around 14 sites in total over a period of four years. Architect - Conquest Design.
2. BP Client: BP
Contract cost: £0.75m
Design and detail of factory built retail units located on eight petrolfillingstationsitesallovertheU.K.
3. Kwik-Fit Client: Kwik-Fit
Contract cost: £0.65m
Design of structure for new build centres, conversion of existing buildings and Properties. Refurbishment of existing centres.Around120centresacrosstheU.K.manyformerpetrolfillingstations.
4. Majestic Wine Warehouses Client: Majestic Wine Warehouses
Contract cost: £0.50m
Design of structure for conversion of existing buildings and existingpetrolfillingstationstoretailunits.Approximately25sitesthroughouttheU.K.
5. Somerfields Client: Somerfields
Contract cost: £0.30m
Design and conversion of 68 petrol station sites for Somerfieldsstores
Rodgers Leask Company ProfileCommercial Multi-site
RODGERS LEASK COMPANY PROFILE COMMERCIAL DATA CENTRES
1. Data Centre Location: Isle of Man
Client: Mercury Engineering
To provide design and details of alteration works to an existing steel framed structure for use as a data centre. The worksincludedsignificantalterationstotheexistingfacadesincludinginfillingofexistingopeningsandtheformationofnewones.Toprovideanewmezzaninefloordeckformedusing in-situ concentre on a preformed meta shutter decking supported on a grillage of steel beams. This was designed to be capable of supporting the high loadings due to equipment to be installed.
Additionaldesignsforraisedaccessfloorsandsteelstaircases completed our design duties.
2. Data Centre Location: Bedford
Client: TRE Global Contract cost: £22m
This project has been developed up to planning stage at present and Rodgers Leask Ltd have been engaged to develop various indicative alternative designs for the superstructure utilizing steel framed solutions. In addition, wehaveundertakenafloodriskassessmentanddrainagestrategy for the proposed scheme.
3. Data Centre, Former Trumans Brewery
Location: Handbury Street, London Client: Interxion
Provision of inspection and review of an existing building adjacent to the current Interxion site to determine the loading capacity of the structure and to assess the structural potential for this to be converted to a data centre.
4. Data Centre, London Location: Grey Eagle Street, London
Client: Interxion Contract cost: £20m
Rodgers Leask Ltd have been involved in preliminary design schemes for adjacent sites close to the existing Interxion site and the new site on Spital Street. The designs included concrete and steel frame alternatives with indicative column, slab and transfer beam layouts being prepared together with possible foundation solutions.
5. Data Centre, London Location: Spital Street, London
Client: Interxion
Rodgers Leask Ltd were employed to design, manage and undertake geo-environmental site investigations for the new data centre on the site of a former brewery. Concept structural designs were also prepared to enable the client and architect to consider planning implications.
Rodgers Leask Company ProfileCommercial Data Centres
Rodgers Leask Company ProfileHotel & Leisure
Rodgers Leask has undertaken numerous hotels and leisure facilities and have in particular investigated and been involved in all types of modular construction to help the construction process. Again there is an expertise both in new and refurbishment works as there is a need often to extend both leisure and hotels.
Projects include:
1. Hilton Great Western Royal, Paddington
Location: Praed Street, Paddington Station, London Client: Great Muirgold/Hilton Contract cost: £45.0m
Refurbishment and extension to Listed Victorian hotel extensivelyalteredandextendedinverybusyandconfinedlocation
2. Muirgold/Scandic, Crawley Location: Crawley
Client: Muirgold/Scandic Contract cost: £13.0m
New9-storeyhotelatCrawley.Insiturcframetofirstfloor,precast concrete and steelwork superstructure.
3. Seymour Street, London Location: Seymour Street, London
Client: Muirgold Ltd Contract cost: £5.0m
Conversion of former hostel into hotel. Strengthening and alteration of 6 storey load bearing masonry building.
4. Shaftsbury Hotel, London Location: London
Client: Muirgold Ltd Contract cost: £4.0m
Refurbishment and alterations to Shaftesbury Hotel. Extensive internal upgrading and structural work to listed load bearing masonry structure.
5. Virgin Leisure Northampton Location: Northampton
Client: Virgin Contract cost: £3.0m
New build leisure complex at Northampton. Steel framed two storey building with gym, pool and spa
6. Virgin Leisure Derby Location: Derby
Client: Virgin Contract cost: £3.0m
New leisure complex at Derby. Steel framed two storey building with swimming pool/spa and gym
1. 4. 6.
RODGERS LEASK COMPANY PROFILE HOTEL & LEISURE
7. Days Inn Location: Various
Client: Cendent Hotels/ Opus Land Ltd Contract cost: £16.5m
Construction of 5 Days Inn hotels, 80 to 120 bedroom capability each
8. Great Marlborough Street Location: London
Client: Vascroft Contractors Contract cost: £8.0m
Substantial rebuilding of former court at Great Marlborough Street, to form hotel. Design of temporary works to support the Palladium Theatre and retained cells oversub basement.
9. Acton Location:
Client: Vascroft Contractors Contract cost: £4.0m
Newbuild6storeyhotelatActon.Precastconcretefloorandwallpanelconstructiononrcframetofirstfloor.
10. Menzies Newcastle Location: Newcastle
Client: Menzies Contract cost: £2.0m
New leisure centre complex at Newcastle. Single storey steel framed structure with gym, aerobics hall and pool/spa
11. Menzies Oldham Location: Oldham
Client: Menzies Contract cost: £2.0m
New leisure complex at Oldham four storey steel, glulam timber and load bearing masonry structure, with gym, aerobics hall and pool/spa.
12. Richmond Hotel Location: Richmond-on-Thames
Client: Richmond Inns Contract cost: £5.0m
Refurbishment and extension to Richmond Hotel. Extensive alterations and strengthening of 4-storey load bearing masonry structure plus new 4-storey bedroom wing.
13. European Hotel, Derby Location: Derby
Client: European Hotel Contract cost: £4.0m
New build hotel in Derby. Four-storey load bearing masonry structureonrcplatformatgroundfloorlevel.
14. Crewe Hall Location: Crewe
Client: Crewe Hall Contract cost: £7.0m
Refurbishment and alterations to grade 1 listed Crewe Hall. New load bearing masonry bedroom block.
Rodgers Leask Company ProfileHotel & Leisure (CONTINUED)
RODGERS LEASK COMPANY PROFILE HOTEL & LEISURE
7. 14.13.
15. Queens Hotel Location: Burton-on-Trent
Client: Queens Hotel Contract cost: £3.0m
Refurbishment and extension. Complex alterations and extension of load bearing masonry structure in a conservation area.
16. Hyde Park Gate Hotel Location: Hyde
Client: Cola Holdings Contract cost: £2.0m
Strengthening of basement structure. Insertion of structure to enable space to be opened up for plant rooms
17. Springs Leisure Location: Ashby de la Zouch
Client: Springs Leisure Contract cost: £3.0m
New build leisure centre at Ashby de la Zouch
18. Scandic Crawley Location: Crawley
Client: Scandic Contract cost: £2.0m
Leisure centre at Crawley. Steel framed building with pool and spa
19. Royal Eagle, Paddington Location: Paddington
Client: Granada London Contract cost: £7.0m
Refurbishment and extension to Royal Eagle at Paddington. Complex alterations to a very dilapidated listed building plus additional bedrooms at roof level
20. Lasande, Derby Location: Derby
Client: Lasande Contract cost: £5.0m
New build hotel. Insitu reinforced concrete frame and steelwork frame to restaurant and roof level plant room.
21. Lockerbie Hotel Location: Lockerbie
Client: Lockerbie Hotel Contract cost: £3.0m
New build 2-storey hotel at Lockerbie. Timber frame with high acoustic performance.
Rodgers Leask Company ProfileHotel & Leisure (CONTINUED)
RODGERS LEASK COMPANY PROFILE HOTEL & LEISURE
Rodgers Leask Company ProfileEducation / Student Accommodation
When constructing schools, colleges, universities or halls of residence, safety, comfort and functionality are key factors in the design. Here at Rodgers Leask there is extensive experience and expertise in this area, from refurbishment to new build.
When designing and detailing any academic establishment Rodgers Leask understands the need for the project to be economic and cost effective, but with safety, both in the construction and to the end user, at the forefront of our minds.
Projects include:
1. University of Derby Location: Derby, Kedleston Road Campus
Client: UniversityofDerby Contract cost: £12.0m
New Art, Design and Technology block
2. Queen Elizabeth’s Grammar School Location: Ashbourne, Derby
Client: Miller Construction/Derbyshire County Council Contract cost: £12.0m
Construction of new sports hall, 6 storey amenity block, 4 storey teaching block. Additional teaching blocks, library, gym and sports facilities
3. Murray Park School Location:
Client: Granite Construction Contract cost: £0.5m
4. Allestree Junior School & Redwood Junior School
Location: Derby Client: Derbyshire County Council Contract cost: £0.3m
Local Authority Junior School Pre-Fab building based on CLASP system
5. St. Benedict’s School Location: Derby
Client: School Direct Contract cost: £0.35m
6. Derby High School for Girls Location: Derby
Client: School Direct Contract cost: £1.0m
1. 2.
RODGERS LEASK COMPANY PROFILE HOTEL & LEISURE
7. St Anselm’s Location: Bakewell, Derbyshire
Client: Wildgoose Construction Contract cost: £1.5m
8. Infant School Location: Chapel-en-le-Frith
Client: Derbyshire County Council Contract cost: £1.3m
9. R C School, Loughborough Location: Loughborough
Client: Birch Construction Contract cost: £0.5m
10. Murray Park School, Derby Location: Derby
Client: School Direct Contract cost: £0.3m
11. Nottingham University Location: Nottingham
Client: NottinghamUniversity Contract cost: £3.0m
Student accommodation in Nottingham. Three-storey load bearing masonry structure.
12. Mature student accommodation, Derby
Location: Kedleston Road, Derby Client: Birchover Developments Contract cost: £2.0m
Mature student accommodation. Three-storey load bearing masonry
13. Mature student accommodation, Southwark
Location: Southwark Client: Weybridge Construction Ltd Contract cost: £6.0m
Mature student accommodation. Three-storey load bearing masonry Student accommodation in Southwark. Nine storey steel framed structure with basement, high water table. Roman archaeology and tube tunnel at the boundary
14. Lichfield University Location: Lichfield
Client: LichfieldUniversity Contract cost: £4.0m
LichfieldUniversityPhases1&2.Newbuildsteelframedbuildings, foundations and drainage, including lecture theatre, workshops, classrooms
15. New Learning Centre, Tamworth Location: Tamworth
Client: New Learning Centre, Tamworth Contract cost: £2.5m
New steel framed buildings, including classrooms, lecture theatre and teaching block
16. William Gilbert School, Derby Location: Derby
Client: School Direct Contract cost: £0.25m
Rodgers Leask Company ProfileEducation / Student Accommodation (CONTINUED)
RODGERS LEASK COMPANY PROFILE HOTEL & LEISURE
11. 14.
Rodgers Leask Company ProfileRetail
Through working with major developers Rodgers Leask has been involved in large retail projects nationwide. This has included various demands from the associated clients, from underground car parks to frame design. In all situations Rodgers Leask has the vital expertise and experience to deliver a solution that is both sound and cost effective.
Projects include:
1. Riverside Retail Park Location: Northampton
Client: Wilson Bowden Properties Ltd Contract cost: £20.0m
Main buildings comprising of 300,000 sq. ft. of retail units plus individual units for car dealerships, MacDonalds and others
2. Bradshaw Way, Derby Location: Derby
Client: Wilson Bowden Properties Ltd Contract cost: £6.0m
Retail development at Bradshaw Way, Derby. Steel framed units with complex retaining walls and foundations due to sloping site and boundaries
3. Albert Street, Derby Location: Derby
Client: Wilson Bowden Properties Ltd Contract cost: £3.0m
Retail developments at Albert Street, Derby. Two storey part steel-framed, part load bearing masonry.
4. Factory Outlet Centre Location: Walsall
Client: St Modwen Developments Contract cost: £20.0m
Part new build and part refurbishment of former mill buildings, plus 1500 space multi-storey car park.
5. Wythenshawe Centre Location: Wythenshawe
Client: St Modwen Developments Contract cost: £10.0m
Alteration, refurbishment and construction of new units at Wythenshawe Centre. Removal of one deck of car park and conversion into retail units and refurbishment of multistorey car park
RODGERS LEASK COMPANY PROFILE RETAIL
1. 5.
(CONTINUED)
Rodgers Leask Company ProfileRetail
6. Kwik Fit Location: Various
Client: Kwik Fit Properties Ltd Contract cost: £0.65m
Motorist Centres for Kwik Fit and other brands within the group,totallingmorethan100unitsacrosstheUK
7. Heatherton Village Location: Derby
Client: Birch Developments Contract cost: £1.0m
New local shopping centre at Heatherton Village, Derby. Load bearing masonry retail units.
8. Sainsbury’s Homebase Location: Various
Client: Sainsbury’s Homebase Contract cost: £0.3m
Refurbishment and alteration of Texas stores converted into Homebaseunits,numeroussitesacrosstheUK.
9. Borough High Street, Southwark Location: Borough High Street, Southwark
Client: El Da Management Contract cost: £7.0m
Nine storey steel framed building, Borough High Street, Southwark,basementandgroundfloorSainsbury’slocal.
10. Retail Park, Tamworth Location: Tamworth
Client: Tawnywood Ltd Contract cost: £15.0m
11. Majestic Wine Location: Various
Client: Majestic Wine Contract cost: £0.3m
Conversion and new build outlets at Chichester, Leeds, Chiselhurst, Roehampton, Victoria, Manchester, Bromley and many other locations.
12. East Midlands Co-op Location: Derby
Client: East Midlands Co-op Contract cost: £2.0m
Retail units with HGV access over roof. East Street, Derby. Steelframedtwostoreystructuresinaveryconfinedsite.
13. Retail Park, Skegness Location: Skegness
Client: Henry Boot Developments Contract cost: £2.4m
New retail park development in Skegness using portal framed sheds for various users such as Halfords, Curry’s and Focus.
14. Bristol Street Motors Location: Northampton
Client: Wilson Bowden Developments Contract cost: £1.8m
New car showroom at Northampton for Bristol Street Motor Group, a steel frame building with large glazed frontage.
15. Meridian Park Location: Leicester
Client: Samworth Brothers Contract cost: £1.65m
New large cold storage distribution extension at Meridian Park, Leicester.
RODGERS LEASK COMPANY PROFILE RETAIL
10.9.
Rodgers Leask Company ProfileHealthcare
Rodgers Leask has had considerable involvement in the design of medical and healthcare properties including renal and diabetic dialysis units, catheter laboratories, breast screening clinics and also general office accommodation around hospital sites. We have experience in both reinforced concrete and structural steelwork frames with expertise in different foundation designs and working on limited access and live sites in city areas.
Projects include:
1. Fresenuis - Glan Clwyd Location: Glan Clwyd, North Wales
Client: Fresenuis Medical Care Services Contract cost: £3.2m
New 14000 sq. ft. Renal and Diabetic unit at Glan Clwyd, North Wales. Curved steel frame structure with upper level platform. Design includes infrastructure works.
2. South Tees NHS Location: Stockton on Tees
Client: South Tees Hospitals NHS Trust Contract cost: £1.5m
New Renal Dialysis unit. Steel frame single storey structure, clad in masonry. Design includes site investigation, structural and infrastructure works and existing car park alterations.
3. Royal Berkshire Hospital Location: Windsor
Client: Royal Berkshire & Battle Hospital NHS Trust Contract cost: £3.0m
Haemodialysis unit, Royal Berkshire Hospital, Windsor. Alteration and extension of existing ambulance station.
4. Fresenuis - Llantrisant Location: Llantrisant, South Wales
Client: Fresenuis Medical Services Contract cost: £1.4m
New Renal Dialysis unit. Steel frame single storey structure including site investigation works, structural works and infrastructure.
5. West Suffolk Hospital Location: Bury St Edmunds
Client: Addenbrooks NHS Trust, Bury St. Edmunds Contract cost: £1.0m
Satellite Dialysis unit at West Suffolk Hospital, Bury St Edmunds. Alteration and extension of existing 1960’s structure.
6. Vicas Hallam Structures Location: Edinburgh
Client: Vica Hallam Structures Contract cost: £0.5m
Breast screening clinic. 5500 sq. ft. structure. Full substructure and superstructure design.
7. Derbyshire Royal Infirmary Location: Derbyshire
Client: DerbyshireRoyalInfirmaryNHSTrust Contract cost: £0.4m
Catheter laboratory extension and link structure
8. Nottingham City Hospital Location: Nottingham
Client: Nottingham City Hospital Trust Contract cost: £0.6m
Architectural main entrance canopy at Nottingham City Hospital
RODGERS LEASK COMPANY PROFILE HEALTHCARE
Rodgers Leask Company ProfileTown Centre Development
1. Hatfield Town Centre Location: Hatfield
Client: St Modwen Developments Contract cost: £40.0m
HatfieldTownCentreRedevelopment.NewRetailunits,Market Hall, Multi-Storey Car Park, Leisure complex, Hotel and High-Rise Residential development
2. Shannons Mill Location: Walsall
Client: St Modwen Developments Contract cost: £30.0m
Shopping Centre Development. New retail units, Multi-Storey Car Park, Supermarket and High-Rise Residential development
3. Wythenshawe Town Centre Location: Wythenshawe Town Centre
Client: St Modwen Developments Contract cost: £10.0m
Alteration, refurbishment and construction of new units. Removal of one deck of car park and conversion into retail units and refurbishment of multi-storey car park
4. Heatherton Village Location: Heatherton Village
Client: Birch Developments Contract cost: £1.0m
New local shopping centre at Heatherton Village, Derby. Load bearing masonry retail units.
5. Eagle Shopping Centre Location: Derby
Client: WestfieldLtd Contract cost: Range from £5k to £100k
Consulting engineers. Assist in all aspects of Structural and Civil engineering from Site Investigation, Surveys, Structural defects, Refurbishment and New-build
RODGERS LEASK COMPANY PROFILE TOWN CENTRE DEVELOPMENT
Rodgers Leask has undertaken a number of town centre developments over the years. In particular we are currently involved with two projects both with confirmed values of £30 and £40 million. The projects are at differing stages of development with one being at the detailed design stage while the other is currently at concept stage. Both projects involve a mix of different sectors with the major areas being retail, multi-storey car parking, residential, hotels and leisure facilities.
Rodgers Leask have investigated and chosen a number of different design options typical of this kind of development ranging from reinforced concrete frames for the multi-storey car parks and retail blocks to steel framed solutions.
With reference to retail, residential, hotel and leisure sectors, more detailed examples of our work can be found within this profile under the relevant sections. Please also note that while no separate section exists on our expertise within the multi-storey and street level car parking sectors all of the aforementioned project sectors have included varying degrees of this type of work.
1. 2.
Rodgers Leask Company ProfileResidential
1. The Postbox Birmingham Location: Birmingham
Client: Cala Homes Ltd Contract cost: £23.0m
UpperMarshallStreet,Birmingham.6-storeyresidentialdevelopment, 260 apartments and 2 levels of car parking.
2. Park Farm, Derby Location: Derby.
Client: Derwent Housing Association Contract cost: £2.0m
Flat complex. Two storey bearing masonry.
3. Boyer Street, Derby Location: Derby
Client: Derwent Housing Association Contract cost: £3.0m
Mixedrefurbishmentandnewbuildflats,BoyerStreet,Derby. Load bearing masonry.
4. Scotland Street, Birmingham Location: Birmingham
Client: Cala Homes Ltd Contract cost: £5.0m
Six-storey apartment block. Reinforced concrete frame up to firstfloorlevel,loadbearingmasonryabove.Basementcarparking and extensive highway retaining structures.
5. Mapperly Hospital Location: Mapperly, Nottingham
Client: David Wilson Homes Ltd Contract cost: £9.0m
Refurbishment of existing hospital and conversion into apartments.
6. Apartments, Witney Location: Witney
Client: Cala Homes Ltd Contract cost: £7.0m
Mixed refurbishment and new build development. Three and four storey apartments in load bearing masonry, with some steelwork and timber structures.
RODGERS LEASK COMPANY PROFILE RESIDENTIAL
Rodgers Leask has extensive experience in carrying out residential projects both involving high-rise and traditional housing estates. With its specialist expertise Rodgers Leask can provide the structural and civil engineering design for this particular sector. We have worked extensively for developers both under traditional and design and build contracts.
In particular, on housing estates we have been involved in the detailed infrastructure works for the roads and the drainage and foundation design. This has involved complicated drainage and attenuation schemes where the Environment Agency or water company have placed a restriction on surface water discharge.
1. 4. 6.
(CONTINUED)
Rodgers Leask Company ProfileResidential
7. Hoxton Square Location: Hoxton, London
Client: Millennium Lofts Contract cost: £4.0m
Five-storey mixed food/apartment development at Hoxton Square. Steel framed building and refurbishment of existing load bearing masonry section
8. Grimson building Location: Leicester
Client: Persimmon Homes Ltd Contract cost: £3.0m
Refurbishmentandconversionoffivestoreybuildingtoapartmentsplusfivestoreynewbuildapartmentblock,Grimson building, Leicester. Reinforced concrete, steelwork and loadbearing masonry
9. The Avenue, Beckenham Location: Beckenham.
Client: Berkeley Homes Contract cost: £2.0m
Apartment block at The Avenue at Beckenham. Four-storey load bearing masonry structure
10. St James’ Homes Location:
Client: St James’ Homes Contract cost: £6.0m
Two-storeyflatswith2floorsofcarparking.Concreteframedstructure.
11. Borough High Street, Southwark Location: Borough High Street, Southwark
Client: El Da Management Contract cost: £7.0m
Nine storey steel framed structure, Borough High Street, Southwark, 4 storeys of residential apartments
12. QUBE, Birmingham Location: Central Birmingham
Client: Cala Homes Contract cost: £6.0m
Four storeys of apartments over commercial units at ground floorlevel,carparkingatgroundandbasementlevels.Mixedsteel frame and load bearing masonry, up to back of footpath on all sides.
13. Residential Development, Oxford Location: Oxford
Client: Taylor Woodrow Contract cost: £3.0m
Four storey apartments with semi-basements in load bearing masonry.
14. Residential Development, Solihull Location: Solihull
Client: Taylor Woodrow Contract cost: £5.0m
Four storeys of apartments over basement car parking. Insitu concrete basement and transfer slab, load bearing masonry above.
Numerous housing development estates undertaken for most major housing developers. Please refer to the projects detailed in the Geotechnical and Environmental section.
Further significant residential projects have been carried out for the following developers:
Total Value
Cala Homes Ltd 4 sites 40.0m+
David Wilson Homes Ltd 3 sites 20.0m+
Persimmon Homes Ltd 15 sites 182.5m
Berkeley Homes Ltd 4 sites 10.0m+
RODGERS LEASK COMPANY PROFILE RESIDENTIAL
6. 6. 9.
Rodgers Leask Company ProfileInfrastructure
RODGERS LEASK COMPANY PROFILE INFRASTRUCTURE
Public highway and public drainage design including liaison with highway authorities, water companies, and the Environment Agency to obtain technical approvals as part of adoption agreements.
Earthworks design to form stable embankments, cuttings and development plateaus.
Ground modelling using latest computer software to optimise economical cut and fill quantities (MX / PDS).
Design of highway retaining structures and bridges.
Design of highway widenings and new junctions within the existing highway.
Vehicle swept path analysis (AutoTrack)
Flood studies including catchment modelling and channel flow analysis in rivers.
Private drainage design for residential, industrial and commercial developments.
Road construction design including concrete, asphalt, tarmac, block paving, and stone finishes.
Rodgers Leask has a strong Civil Engineering Department with broad expertise covering the design of infrastructure in the majority of the construction industry. State of the art software is used to design highways, drainage and site levels. Expertise extends to the following:
Hydraulic modelling and design of public and private surface water and foul drainage systems (MicroDrainage).
Hydraulic design and preparation of economical solutions for surface water detention systems including underground tanks, detention ponds, and open ponds/lakes.
Design of public and private pumping stations and rising mains.
Public and private sewer diversion schemes.
Environment Agency approved surface water outfall structures to watercourses.
Research of service availability including communications with water, electricity, gas and IT suppliers.
Production of co-ordinated service drawings.
1. Chapelford Urban Village Location: Warrington
Client: David Wilson Homes Contract cost: £20m
Design of infrastructure roads and sewers for 2500 plot development, including over 3km of new local distributor ‘avenues’ and attenuation of storm water in underground tanks and oversized pipes.
2. Church Gresley Location: Derbyshire
Client: David Wilson Homes Contract cost: £10m
Design of all roads and sewers for 1200 plot development inSouthDerbyshire,includingnewmajorcollectorroad,fivenew roundabouts, foul water pumping station and large open balancing pond.
3. Kibworth Location: Leicester.
Client: David Wilson Homes Contract cost: £7m
Design of all roads and sewers for a 650 plot development in South Leicestershire, including new bypass and associated roundabouts,carriagewideningscheme,trafficsignaljunction, foul water pumping station and two separate large open balancing ponds.
4. Shadsworth Innovation Park Location: Blackburn
Client: St Modwen Contract cost: £20m
Design of all roads and sewers for a large commercial development in Blackburn, including open storm water balancing lagoon and associated swales, roundabout improvement works, cycle links and earthwork modeling / specification.
RODGERS LEASK COMPANY PROFILE INFRASTRUCTURE
Rodgers Leask Company ProfileInfrastructure
The work carried out by Rodgers Leask’s Civil Engineering Department is becoming of ever growing importance both in pure engineering terms and on major structural projects where there are requirements for drainage and highway design.
For the majority of clients for whom we have worked we have undertaken major infrastructure works including roads and drainage. Most schemes now involve the provision of storm water detention facilities within a site to avoid overloading the existing sewerage network, or watercourses. We have the appropriate computer software to be able to model roads and drainage schemes efficiently.
(CONTINUED)
(CONTINUED)
Rodgers Leask Company ProfileInfrastructure
RODGERS LEASK COMPANY PROFILE INFRASTRUCTURE
5. Vulcan Works Location: St. Helens
Client: St Modwen Developments Contract cost: £5m
Vulcan Works. Design of all public roads and sewers for a large 600 plot development site in St. Helens (site to be sold in individual parcels for residential development). Works include major offsite highway improvements, such as two newtrafficsignaljunctions,segregatedrightturnmajor/minorjunction,speedcontrolmeasuresandnewpuffincrossings.
6. Millis House Client: Birch Construction
Contract cost: £0.8m
Millis House residential development. Section 38 and Section 104 drainage.
7. Brownhills Location: Brownhills
Client: David Wilson Homes West Midlands Contract cost: £1.3m
Brownhills residential development. Section 278 new roundabout on existing highway.
8 Jubilee Retail Park Location: Loughborough
Client: Wilson Bowden Developments Contract cost: £1.0m
Jubilee Retail Park, Loughborough. Section 278 road wideningandtrafficsignaljunction.
9. The Hub Location: Birmingham
Client: Opus Land Ltd \ Frontier Estates Ltd Contract cost: £2.2m
New site infrastructure scheme for entire 1.6m sq. ft. development site at The Hub, Birmingham
10. The Green Location: Solihull
Client: Opus Land Ltd \ Frontier Estates Ltd Contract cost: £1.0m
Development of 55 acre site at The Green, Solihull
11. Ilkeston, Derbyshire Location: Derbyshire
Client: Hallam Land Management Contract cost: £0.3m
New residential development - access road and drainage works to 27 properties in Ilkeston, Derbyshire.
12. M54 Junction 4 Location: Telford
Client: Henry Boot Developments Ltd Contract cost: £2.0m
M54 Junction 4 new services at Telford comprising of car parks, petrol station and motel.
13. Dove Valley Park Location: Derbyshire
Client: Dove Valley Park Ltd Contract cost: £2.0m
Site access highway and drainage works for Dove Valley Park, Derbyshire
14. Wainfleet Road, Skegness Location: Skegness
Client: Henry Boot Developments Contract cost: £0.3m
RetailparkdevelopmentatWainfleetRoad,Skegness
15. Selston Location: Selston
Client: David Wilson Homes Contract cost: £0.3m
Infrastructure for residential development
(CONTINUED)
Rodgers Leask Company ProfileInfrastructure
RODGERS LEASK COMPANY PROFILE INFRASTRUCTURE
16. Chellaston, Derby Location: Derby
Client: Persimmon Homes Contract cost: £1.3m
Infrastructure for large residential development at Chellaston, Derby. This included a complicated balancing system
17. Loundsley Green Location:Chesterfield
Client: Persimmon Homes Contract cost: £0.4m
Infrastructure to housing site in Loundsley Green, Chesterfield
18. Hallam Fields Road Location: Ilkeston
Client: Morris Homes Contract cost: £0.3m
Infrastructure for housing development at Hallam Fields Road, Ilkeston
19. Dunston Road Location:Chesterfield
Client: Tawnywood Developments Contract cost: £0.3m
Infrastructure for industrial site at Dunston Road, Chesterfield.
20. Centre 500 Location: Wolstanton, Stoke
Client: St Modwen Developments Contract cost: £0.5m
Infrastructure for industrial estate. This included adoptable pumping station and rising main.
21. Trent Canal Bridge Location: Burton on Trent
Client: Ballast Construction Contract cost: £0.6m
Canal bridge over Trent Canal to service industrial park at Burton on Trent.
22. Hilton Brook, Derbyshire Location: Hilton Brook, Derbyshire
Client: St Modwen Developments Contract cost: £0.8m
New highway bridge over Hilton Brook, Derbyshire
23. Ashby Canal Location: Market Bosworth
Client: Persimmon Homes Contract cost: £0.4m
Bridge widening over Ashby Canal at Market Bosworth
24. Coleshill Brook Location: Coleshill Brook
Client: St Modwen Developments Contract cost: £0.8m
Bridge over Coleshill Brook to service commercial park
25. Bardon Location: Bardon
Client: Wilson Bowden Properties Contract cost: £4.0m
Earthworks remodelling to industrial site at Bardon. This work included full site supervision of all earthworks.
26. Hilton, Derbyshire Location: Derbyshire
Client: Persimmon Homes Contract cost: £2.0m
Site infrastructure for new residential site at Hilton, Derbyshire for national house builder accessing 80+ properties
27. Forresters Business Park Location: Derby
Client: Wilson Bowden Properties Contract cost: £0.5m
New site infrastructure for Forresters Business Park,
1. Spittal Lane, Chesterfield Location:Chesterfield
Client: Persimmon Homes Contract cost: £3.6m
40 units built at 5m depth off foundry sand. Ground remediated and vibro-compacted
2. Banner Lane, Coventry Location: Coventry
Client: Persimmon Homes Contract cost: £11.2m
80 units built on old industrial site. Various forms of foundation including lime stabilisation
3. Hucknall Colliery Location: Nottingham
Client: Persimmon Homes Contract cost: £23.1m
Hucknall Colliery, Nottingham. 140 units on site of old colliery. Ground remediated with material of high combustability buried
4. Hucknall Road Location: Nottingham
Client: Persimmon Homes Contract cost: £36.0m
Hucknall Road, Nottingham. 200 units on site of old printing works. Ground remodelled and then treated with vibrocompaction
5. Market Bosworth Location: Market Bosworth
Client: Persimmon Homes Contract cost: £36.0m
Market Bosworth. 80 units on old timber treatment yard with problem due to contamination
6. Gravel pits, Stretton Location: Stretton
Client: Persimmon Homes Contract cost: £6.5m
50 units on site with gravel pits, Stretton
RODGERS LEASK COMPANY PROFILE GEOTECHNICAL AND ENVIRONMENTAL
Rodgers Leask Company ProfileGeotechnical and Environmental
Rodgers Leask Environmental provides specialist advice in all aspects of geotechnical and environmental engineering. The company employs a team of qualified and experienced staff with expertise in the fields of geology, engineering geology, geotechnical engineering, environmental science, contamination and project supervision. Expertise extends to the following:
Geotechnical and Environmental investigations and testing
Foundation solutions and ground improvement recommendations
Site remediation strategies
Factual and Interpretative Site Investigation Reports.
Qualitative Risk Assessment (QRA)
Cost Benefit Analysis (CBA)
Below are examples of sites which Rodgers Leask Environmental have been responsible for:
(CONTINUED)
Rodgers Leask Company ProfileGeotechnical and Environmental
RODGERS LEASK COMPANY PROFILE GEOTECHNICAL AND ENVIRONMENTAL
7. Redhill Farm Location: Wellingborough
Client: Henry Boot Homes Contract cost: £7.5m
50 units on site with gravel pits.
8. Loundsley Green Location:Chesterfield
Client: Persimmon Homes Contract cost: £5.4m
60 units on site with shallow coal seams.
9. Britannia Ironworks Location: Bedford
Client: KingsOak Milton Keynes Contract cost: £15.2m
Britannia Ironworks, Bedford. 80 units on site with high concentration levels. Bioremediation used with ground treated with vibro-compaction.
10. Burton Latimer Location:
Client: KingsOak Milton Keynes Contract cost: £5.6m
28unitsbuiltinanoldquarrythathadbeenbackfilled.Various forms of foundation used.
11. Oxclose Farm Location:Sheffield
Client: Henry Boot Homes Ltd Contract cost: £4.8m
30 units on site with shallow mine workings and mine shafts
12. Shipley Farm Location: Ilkeston
Client: Bloor Homes Ltd Contract cost: £15.0m
100 units on raft foundations due to past mine workings
13. Tipping Lane Location:Farmsfield
Client: Wimpey Homes Ltd Contract cost: £7.2m
40 units on site of old light industrial and engineering factories. Extensive contamination assessment carried out.
14. Bratton Lane Location: Telford
Client: Persimmon Homes Ltd Contract cost: £11.4m
60 units on site assessed with major faults
PRELIMINARY INVESTIGATION WORK
15. Cawdor Quarry Location: Matlock
Client: Persimmon Homes Ltd Contract cost: £65.0m
350 units proposed on a site that we have carried out extensive investigation and ground conditions, contamination and rock faces
Rodgers Leask Company ProfileComputer Aided Design and Detailing
RODGERS LEASK COMPANY PROFILE COMPUTER AIDED DESIGN AND DETAILING
PDS and MX Site (integrated with AutoCAD) for earth modelling together with necessary design on highways
Micro Drainage for drainage calculations, design and layout
AutoTrack for highway design.
ESA Prima, Master Series, S-Frame and P-frame for frame analysis
TEDDS and SCALE calculation software for all aspects of structure
CSC 3D+, S-Frame and Fastrack/Portal Frame for frame design and layout(integrated with AutoCAD)
CADS 3D+MAX, R.C. Beam and Column Designer and R.C. CAD for reinforced concrete calculation, design, arrangement and scheduling
CADS Wall Panel Designer
Printing of the resulting information is all done in-house with networked printers, photocopiers and large format - large volume multi-function copiers, both monochrome and colour, available to all users. This enables prompt issue of documents to our clients and scheme partners.
Rodgers Leask recognises the benefits of a structured IT strategy and employs a full-time IT Manager to ensure the IT is maintained and upgraded, thus providing immediate support to all the staff in our four offices. We have a fully maintained webpage, which we would invite all our clients to visit, and can provide web authoring services if required. All offices are serviced by an Intranet utilising the latest equipment and cabling standards throughout. These are linked via our servers to the Internet for necessary electronic communications such as email, ftp, http, IRC and communications such as email , ftp, http, IRC and VPN. A backup of all systems is carried out daily to ensure that loss of data due to accidental deletion or hardware failure is minimised.
The majority of our design and detailing is carried out with the help of computers although not at the expense of traditional knowledge and skill. All our technical staff use AutoCAD based products supplemented by Microsoft Office.
On the design front we have numerous pieces of software available to our Engineers and Technicians to aid them in their design of both earthworks and structures. In particular we carry out designs utilisign the following:
Appendix i Quality Policy
RODGERS LEASK COMPANY PROFILE APPENDIX I
Rodgers Leask Company Profile
Rodgers Leask Company ProfileQuality Policy
The Management is committed to:
1. Develop and improve the Quality Management System
2. Continually improve the effectiveness of the Quality Management System
3. The enhancement of client satisfaction
The Management has a continuing commitment to:
1. Ensuring that client needs and expectations are determinedandfulfilledwiththeaimofachievingclient satisfaction.
2. Communication throughout the Organisation the importance of meeting client needs and all relevant statutory and regulatory requirements
3. Establish the Quality Policy and its objectives
4. Ensure that the Management Reviews set and review the quality objectives and reports on the Internal Audit results as a means of monitoring and measuring the processes and the effectiveness of the Quality Management System
5. Ensure the availability of resources.
RODGERS LEASK COMPANY PROFILE QUALITY POLICY
The structure of the Quality Management System is definedintheQualityManual,copiesofwhichareheldby the Quality Manager.
All personnel understand the requirements of this Quality Policy and abide with the contents of the Quality Manual.
The Organisation complies with all relevant statutory and regulatory requirements.
The Organisation constantly monitors its quality performance and implements improvements when appropriate.
The Quality Policy is regularly reviewed in order to ensure its continuing suitability.
Copies of the Quality Policy are made available to all members of staff.
Copies of the minutes of Management Reviews, or extracts thereof, are provided to individual members of staff in accordance with their role and responsibilities as a means of communicating the effectiveness of the Quality Management System.
Rodgers Leask (the ‘Organisation) aims to provide defect free products (service) to its clients on time and within budget.
The Organisation operates a Quality Management System that has gained BS EN ISO9001:2000certification,includingaspectsspecifictoconsultingcivil,structuraland environmental engineering.
59
Rodgers Leask Company Profile
Appendix iiCPD & Training
RODGERS LEASK COMPANY PROFILE APPENDIX II
Rodgers Leask Company ProfileCPD & Training
RODGERS LEASK COMPANY PROFILE CPD & TRAINING
1. Health & Safety A series of in-house seminars delivered by an external
health and safety consultant, Wenlock Limited, are compulsary for all technical staff. In this manner staff are kept up to date with relevant changes to health and safety legislation.
All Rodgers Leask technical staff are also required to obtain relevant Construction Industry Training Board qualifications.InparticularallengineersarerequiredtoholdtheCITBmanagementqualification.
2. CPD - Continued Professional Development
A series of in-house courses and seminars are held throughout the year enabling the workforce to develop and keep abreast of new technologies and techniques.
3. Management & Business Development Training
A number of in-house courses held to assist in the development of the business, undertaken by external consultants iems ltd. The sessions have looked at company goals, processes, improvements, strategies, actionplans,potentialbenefitsandpotentialpitfallswhich will help to drive Rodgers Leask forward leading to further expansion.
4. IStructE / ICE Rodgers Leask promote and support the Institution of
Structural Engineers and Institution of Civil Engineers. John Rodgers and Andrew Leask have both been past Chairman of the Institution of Structural Engineers, East Midlands Branch, and are both still very active within the Branch in promoting structural engineering within the region.
5. Academic / Professional Qualifications Rodgers Leask assists all employees in their
development within the company. For staff who wish to pursue relevant degrees and other professional qualificationssuchaschartership,RodgersLeask
Limited provide every assistance in enabling them to reach their potential.
63
Rodgers Leask Company Profile
Appendix iii Professional Indemnity
RODGERS LEASK COMPANY PROFILE APPENDIX III
67
Rodgers Leask Company Profile
Appendix iv Health and Safety Policy
RODGERS LEASK COMPANY PROFILE APPENDIX IV
RODGERS LEASK COMPANY PROFILE HEALTH & SAFETY POLICY
Rodgers Leask Company ProfileCompany Health & Safety Policy
This Health and Safety Policy has been laid down by the companies, Rodgers Leask Ltd and Rodgers Leask Environmental Ltd (the Rodgers Leask Group), in accordance with the Health and Safety at Work Act 1974. The Policy is reviewed annually. Henceforth the term ‘Company’ will mean both Rodgers Leask Ltd and Rodgers Leask Environmental Ltd, i.e. the Rodgers Leask Group.
The Company willingly accepts its duty, so far as is reasonably practicable, to safeguard the health, safety and welfare of its employees and others who may be affected by their actions.
It is Company Policy to provide safe and health working conditions for all employees, and to make available all necessary resources in terms of manpower, plant and equipment training, information and supervision for the safe execution of their work.
Due regard is given to the provisions of the Health and Safety at Work Act 1974, the Construction (Health, Safety and Welfare) Regulations 1996, The Construction (Design & Management) Regulations 1994, the Management of Health and Safety at Work Regulations 1999, the Work at Height Regulations 2005,theProvisionandUseofWorkEquipmentRegulations 1998, the COSHH Regulations 2002 (and as amended 2004), the Personal Protective Equipment at Work Regulations 1992, the Control of Noise at Work Regulations 2005, Control of Vibration at Work Regulations 2005, and all other relevant legislation, approved codes of practice etc.
The implementation of this Health and Safety Policy is the direct responsibility of the company director, Mr A Leask (hereafter referred to as the Health and Safety Director).
To assist in this undertaking, the responsibility for the management of health and safety throughout the company is delegated to the Health and Safety Co-Ordinator, Mr I Bradley.
All other employees of the company have a duty under the Policy and the Law to assist in this undertaking. The content of the Policy is made known to all employees through Company Induction as the start of employment as made necessary by amendment.
ToassisttheHealthandSafetyManagerinfulfillinghisduties, the Company retains the services of Health and Safety Consultants, Wenlock Health and Safety Ltd ofTelford(specifically,MrsJ.M.Horsewood,MIIRSM,MaPS, TechSP).
The company thus has access to external safety services such as advice, training, accident investigation, documentation etc. and is kept fully abreast of changing legislation, developments and best practice.