Retail Price List: Towers

Standard Guyed-Lattice Towers Model No. Price

7.5 & 10 kW

18m (60 ft)

Tower kits include Bergey galvanized 3m (10 ft) lattice type tower sections and associated hardware, guy anchors, guy wires and associated hardware, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included.

XLG18 $7,400

24m (80 ft) XLG24 $8,100

30m (100 ft) XLG30 $9,200

37m (120 ft) XLG37 $10,850

43m (140 ft) XLG43 $12,680

Safety Climb

Anti-fall system includes down-tower safety cable and cammed slider. Does not include climber's belt / harness.

XLGPK Request

Tilt-up Guyed-Lattice Towers Model No. Price

1 kW

18m (60 ft) Tower kits include galvanized 3 m (10 ft), 114 mm (4.5 in) diameter tubular tower sections and associated hardware, guy anchors, guy wires and associated hardware, and gin-pole. Not UPS shippable, must ship via truck. Tower electrical wiring is not included.

1TU18 $1,595

24m (80 ft) 1TU24 $2,050

30m (100 ft) 1TU30 $2,450

Tower Raising Kit

Tower Raising Kits include a non- freewheeling worm-gear winch, a special bracket system for attaching the winch to a guy anchor, a pull-up cable, and a pulley block. Also includes a drive attachment for cordless drills.

1TRK $355

7.5 & 10 kW

18m (60 ft) Tower kits include Bergey galvanized 3m (10 ft) lattice type tower sections and associated hardware, guy anchors, guy wires and associated hardware, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Includes jackstand. Tower wiring is not included.

XLGT18 $10,650

24m (80 ft) XLGT24 $11,800

30m (100 ft) XLGT30 $13,900

GripHoist Kits

Equipment to manually lift Excel tower without power winch. Includes GripHoist lifting device, GriHoist cable, snatchblock, and attachment hardware. The XLGHK-60/80 is for 60 ft. and 80 ft. Tilt-up Towers. The XLGHK-100 is required for the 100 ft. tower.

XLGHK-60/80 $3,075

XLGHK-100 $3,450

Raising Kit 5:1 pulley blocks and cable for raising tower. Does not include a winch. XLTRK $1,990

Self-Supporting Lattice Towers (SSV) Model No. Price

7.5 & 10 kW

18m (60 ft)Tower kits include Rohn SSV galvanized 6m (20 ft) lattice type tower sections and associated hardware, J-bolt anchors, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included.

XLSS18 $9,600

24m (80 ft) XLSS24 $11,800

30m (100 ft) XLSS30 $14,700

37m (120 ft) XLSS37 $18,400

Safety Climb

Anti-fall system includes down-tower safety cable and cammed slider. Does not include climber's belt / harness.

XLGPK-SSV Request

Self-Supporting Tubular Towers (Monopole) Model No. Price

7.5 & 10 kW

18m (60 ft)Tower kits include Rohn 18-sided tapered tubular sections (35-48 ft. long each), J-bolt anchors, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included. Note: These towers are too long for common carriers and must be specially trucked. A crane is required for unloading. A Safety Climbing Device system comes with each tower.

XLST18 $15,450

27m (90 ft) XLST27 $21,950

37m (120 ft) XLST37 $31,950

Page 1 of 2Retail Prices 2

1/17/2007http://www.bergey.com/Products/Prices2.htm

Options Model No. Price

1 kW

Enhanced Tower Corrosion Protection, for marine sites ECPT Request

Special tower adapters, for non-standard towers Special Request

7.5 & 10 kW

Enhanced Turbine Corrosion Protection, for marine sites XLECPT $215

Special Anchoring Schemes SAS Request

Special tower adapters, for non-standard towers Crate Request

Tower Fabrication License, drawings, parts list, and one-time license for local fabrication, Standard Guyed Towers only, export orders only

TFL Request

Export crating, for tower hardware kit (tower sections not normally crated) Crate Request

Effective 8/18/2006 - All Prices are Subject to Change Without Notice.

Page 2 of 2Retail Prices 2

1/17/2007http://www.bergey.com/Products/Prices2.htm