40mm

45mm

50mm

Large Stem

Medium Stem

Small Stem

Stainless steel rods within stems provide added mechanical strength

REMEDY® SHOULDER SYSTEM

SHOULDER MODULARITY

REMEDY® Shoulder Spacers:• Single-use medical

devices/ethylene

oxide sterile

• Formed with bone

cement (PMMA)

and gentamicin

REMEDY® MODULAR

STEMS

uuu

Variable head and neck design allows desired placementand positioning up to 9mm

2

REMEDY® MODULAR

HEADS Head sizes interchangeable

with stems for surgical flexibility

The REMEDY® Shoulder Spacer is part of the treatment foreseen in a two-stage procedure performed in the event

of permanent prosthesis infection. The REMEDY® Shoulder Spacer implant is intended for temporary use only

(180 days or less). It allows basic joint mobility and releases antibiotics into the joint

area to protect the implant from bacterial colonization. A second surgery will

be required at a later date to remove the REMEDY® Shoulder Spacer and

replace it with a permanent shoulder joint implant.

Stainless steel rod reinforces the humeral stem

Stainless steel rods within stems provide added mechanical strength

HIP MODULARITYThe REMEDY® Hip Spacer is part of the treatment foreseen in a two-stage procedure

performed in the event of permanent prosthesis infection. The REMEDY® Hip Spacer

implant is intended for temporary use only (180 days or less). It allows basic joint mobility

and releases antibiotics into the joint area to protect the implant from bacterial colonization.

A second surgery will be required at a later date to remove the REMEDY® Hip Spacer and

replace it with a permanent hip joint implant.

Short Stem Small

Short StemMedium

Short StemLarge

Long StemSmall

Long Stem Medium

Long Stem Large

60mm

54mm

46mm

REMEDY® MODULAR HEADS

REMEDY® MODULAR STEMS

REMEDY® Hip Spacers:• Single-use medical

devices/ethylene

oxide sterile

• Formed with bone

cement (PMMA)

and gentamicin

uu

u

Variable head and neck design allows desired placementand positioningup to 17mm

Stainless steel rods within stems provide added mechanical strength

Stainless steel rod reinforces the femoral stem

3

REMEDY® HIP SYSTEM

Head sizes interchangeable with stems for surgical flexibility

Femoral Component

54mm(Small)

TibialComponent

60mm(Small)

Tibial Wedge60mm - Width10mm - Height

(Small)

KNEE INTERCHANGEABILITYThe REMEDY® Knee Spacer is part of the treatment foreseen in a two-stage

procedure performed in the event of permanent prosthesis infection. The

REMEDY® Knee Spacer implant is intended for temporary use only (180 days

or less). It allows basic joint mobility and releases antibiotics into the joint area

to protect the implant from bacterial colonization. A second surgery will be

required at a later date to remove the REMEDY® Knee Spacer and replace it

with a permanent knee joint implant.

REMEDY® Knee Spacers:• Single-use medical

devices/ethylene oxide sterile

• Formed with bone cement

(PMMA) and gentamicin

REMEDY® LARGE MODULAR KNEE

L

REMEDY® SMALL MODULAR KNEE

S

Femoral Component

74mm(Large)

TibialComponent

80mm(Large)

Tibial Wedge80mm - Width10mm - Height

(Large)

Femoral Component

64mm(Medium)

TibialComponent

70mm(Medium)

Tibial Wedge70mm - Width10mm - Height

(Medium)

REMEDY® MEDIUM MODULAR KNEE

M

TOTAL SYSTEM INTERCHANGEABILITY

M

L

M

L

S

M

S

S

L

L

M

S

S

L

L

S

M

M

• 65% of cases result in different

size femur and tibia*

• 35% of cases use a tibial wedge*

* Internal OsteoRemedies data4

REMEDY® KNEE SYSTEM

Size XL Femoral Component also available upon request

TOTAL SYSTEM INTERCHANGEABILITY

ELUTION OVERVIEW

ANTIBIOTIC TREATMENT PLAN Antibiotics In Spacers: REMEDY® Spacers – 4.8% Gentamicin In Sulfate

Molds – Various/Inconsistent

Antibiotics In Cement For Fixation Same With Molds Or REMEDY® Spacer System

Systemic Antibiotic Treatment Plan Same With Molds Or REMEDY® Spacer System

1

2

3

5

REMEDY® data supported by third-party analysis and referenced in available testing report

Data of Palacos® R+G and Simplex PTM Tobramycin are taken from: Moojen et al., 2008 - J. Arthroplasty

Palacos is a registered trademark of Heraeus Medical GmbH

Simplex P Tobramycin is a trademark of Stryker®

Weeks

20

40

60

80

100

120

140

160

180

0 1 2 3 4 5 6 7 8 9

Palacos R+G (51mm Head)

REMEDY Hip With Short Stem (54mm Head)®

REMEDY®

Intra-Op Molds

205 mg/7.2% AB Release

27 mg/2.1% AB Release

24 mg/0.9% AB Release

6 Months

REMEDY Hip w/ Long Stem (54mm Head)®

Simplex P Tobramycin (51mm Head)

200

150 mg/8.5% AB Release

REMEDY Knee w/ Medium Femur, Tibia, Insert ®

REMEDY® ELUTION PROFILE OF ANTIBIOTICS

REMEDY® SHOULDER SPACER TECHNIQUE

6

STEP 1In accordance with the existing shoulder manufacturer’s tech-nique, prepare the infected joint space by first removing the shoulder prosthesis and any PMMA cement, if present, and any hardware that may be a reservoir of infection.

STEP 2Using the Shoulder Spacer Trials and templates, select the appropriate size humeral stem and humeral head components.

STEP 3

Once the appropriate humeral head size is selected, open the package and remove the monomer vial.

Carefully, break the vial open and pour all the monomer into the screw opening of the humeral head.

STEP 4Remove the plastic cap, pour the remaining monomer out and place the head on the humeral stem. Begin turning the head until the desired offset and length are achieved. Approximate working time for the head is 10 to 15 minutes.

WARNING: The humeral head must be seated past the Safety Line marked in purple on the stem thread.

On the stem trials, the purple line is designated with a missing thread on the stem trunnion.

STEP 5Using UNITE® AB Bone Cement, or other FDA- cleared PMMA, apply cement to the proximal aspect of the stem. The use of bone cement is compulsory to avoid rotation and to limit the risk of dislocation or spacer loosening.

Note: Bone cement may also be applied once the stem is seated within the humeral canal.

STEP 6Insert the humeral stem (with head properly affixed) into the canal to the desired position.

Continue to prepare the joint space with aggressive debridement, pulse lavage and other standard practices for preparing the infected joint space.

COVER CAP

Insert and seal the hole with the plastic cover cap supplied with the humeral head. Shake the head for 60 seconds to ensure all of the threads within the head are wet with monomer.

TRIAL

TEMPLATE

SHOULDER SPACERRSSLG

®

6800 Poplar Avenue • Suite 120 • Memphis, TN 38138901.453.3141 • info@osteoremedies.com • OsteoRemedies.com

OsteoRemedies and corporate mark are registered trademarks of OsteoRemedies, LLC ©2015 RSSLG 11/15

Important Note: Once the head location is selected, be sure not to continue to adjust the head location as this could affect the fixation between the head and the stem.

7

SHOULDER SPECIFICATIONS

REMEDY® MODULAR

HUMERAL HEAD REMEDY® MODULAR

HUMERAL STEM

72

1

5

3

4

6

REMEDY® SHOULDER SPACER

8

Description

40

45

50

25

25

25

101

116

131

7

10.5

14

9.4

12.6

15.8

0.5

0.5

0.6

0.1

0.3

0.5

7

10.5

14

(MM)

1 2 3 4 5 6 7 8 Gentamicin

Base (g)

REMEDY Modular Humeral Head 40mm

REMEDY Modular Humeral Head 45mm

REMEDY Modular Humeral Head 50mm

REMEDY Modular Humeral Stem - Small

REMEDY Modular Humeral Stem - Medium

REMEDY Modular Humeral Stem - Large

19

19

19

9

9

9

Catalog #

RSHHSM

RSHHMD

RSHHLG

RSHSSM

RSHSMD

RSHSLG

®

®

®

®

®

®

8

REMEDY® HIP SPACER TECHNIQUE

STEP 1In accordance with the existing total joint manufacturer’s technique, prepare the infected joint space by first removing the prosthesis and any PMMA cement, if present, and any hardware (which may be a reservoir of infection).

STEP 2Using the REMEDY® Spacer Trials and templates, select the appropriate size femoral stem and femoral head components.

STEP 3

Once the appropriate head size is selected, open the package and remove the monomer vial.

Break the vial open and pour all the monomer into the screw opening of the head.

STEP 4

STEP 5Remove the cover cap, pour the remaining monomer out and place head onto the femoral stem. Begin to turn the femoral head until the appropriate “off-set” is achieved.

WARNING: The head must be seated past the Safety Line marked in blue or purple on the stem thread.

On the Trials, the blue orpurple line is designated with a missing thread on the trunnion.

STEP 6Using UNITE®AB Bone Cement, or any FDA- cleared AB PMMA, apply cement to the proximal aspect of the stem. The use of the cement is compulsory to avoid rotation and to limit the risk of dislocation.

Note: Cement may also be applied once seated withinthe femoral canal.

STEP 7Insert the stem (with head properly affixed) into the canal.

Continue to prepare the joint space with aggressive debridement and pulse lavage.

COVER CAP

Insert and seal the hole with the plastic cover cap supplied. Shake the head for 60 seconds to ensure all of the threads within the head are wet with monomer.

(Approximate working time for head position is 10 to 15 minutes.)

Important Note: Once the head location is selected, be sure not to continue to adjust the head location as this could affect the fixation between the head and the stem.

TRIALS

TEMPLATE

1 2 3 4 5 6 7 8

REMEDY Modular Head 46mm

REMEDY Modular Head 54mm

REMEDY Modular Head 60mm

REMEDY Modular Stem - Small

REMEDY Modular Stem - Medium

REMEDY Modular Stem - Large

REMEDY Modular Long Stem - Small

REMEDY Modular Long Stem - Medium

REMEDY Modular Long Stem - Large

46

54

60

42.3

50.9

57.3

111

112

117

227

227

231

10

11

11.5

10

11

11.5

16.5

21.7

24

16.5

21.7

24

11.3

15.5

16.5

11.3

15.5

16.5

35.6

35.6

35.6

35.6

35.6

35.6

17

17

17

17

17

17

0.9

1.6

2.3

0.5

0.6

0.7

0.6

0.8

0.9

Catalog #

RHHDSM

RHHDMD

RHHDLG

RHSTSM

RHSTMD

RHSTLG

RHLSSM

RHLSMD

RHLSLG

Gentamicin Base (g) Description

(MM)

®

®

®

®

®

®

®

®

®

REMEDY® HIP SPACER

9

HIP SPECIFICATIONS

2 1

REMEDY® MODULAR

HEAD

7

3

5

4

6

REMEDY® MODULAR STEM

3

4

7

5

6

REMEDY® MODULAR LONG STEM

8

8

REMEDY® KNEE SPACER TECHNIQUE

STEP 1In accordance with the existing total joint manufacturer’s technique, prepare the infected joint space by first removing the prosthesis and any PMMA cement, if present, and any hardware (which may be a reservoir of infection).

Continue to prepare the joint space with aggressive debridement and pulse lavage.

STEP 2Using the REMEDY® Spacer Trials and templates, select the appropriate size femoral and tibial components. It is important that the joint is neither loose nor tight, therefore the surgeon will have to consider the additional room occupied by the cement needed for the fixation.

Apply PMMA bone cement (see Step 3) to the femoral component and femoral surface.

STEP 4STEP 3Using UNITE®AB Bone Cement, or any FDA-cleared AB PMMA, apply cement over the entire surface of the component and tibial plateau and insert into the tibia.

OPTIONAL

STEP 5Reduce the joint, removing all the excess cement, avoiding the cement that may go on the articular surface. To assure correct alignment of the components, make flex/extension movements before the cement curing occurs. Then close and check flex/extension movements and lateral stability.

Depending on the stability of the knee, it may be necessary to apply a brace to avoid the risk of dislocation.

Note: When placing the components with cement, DO NOT impact the device with a mallet. It is recommended to use hand pressure only while placing the components.

If the tibial bone defect is excessive and additional height is required, apply PMMA to the tibial wedge/insert and cement this to the inferior aspect of the tibial component.

10

TEMPLATE

TRIALS

11

KNEE SPECIFICATIONS

Description

REMEDY Tibial Component 60mm

REMEDY Tibial Component 70mm

REMEDY Tibial Component 80mm

REMEDY Femoral Component 54mm

REMEDY Femoral Component 64mm

REMEDY Femoral Component 74mm

REMEDY Femoral Component 84mm

REMEDY Tibial Wedge/Insert 60mm

REMEDY Tibial Wedge/Insert 70mm

REMEDY Tibial Wedge/Insert 80mm

54

64

74

84

41.6

49.3

56.3

63.4

9.5

10.5

11.5

12.5

60

70

80

60

70

80

36

42

48

36

42

48

25

25

25

7.8

8.2

8.8

0.4

0.6

0.9

0.5

0.8

1.2

1.6

0.3

0.5

0.7

14.5

14.5

14.5

14

14

14

10

10

10

(MM)

1 2 3 4 5 6 7 8 9 Catalog #

RKTBSM

RKTBMD

RKTBLG

RKFMSM

RKFMMD

RKFMLG

RKFMXL

RKINSM

RKINMD

RKINLG

Gentamicin Base (g)

®

®

®

®

®

®

®

®

®

®

REMEDY® KNEE SPACER

9

5

4

7

REMEDY® TIBIAL

WEDGE/ INSERT

3

REMEDY® FEMORAL COMPONENT

1

2

4

7

8

REMEDY® TIBIAL

COMPONENT

6

5

1-800-OSTEO-XL 901-453-3141 info@OsteoRemedies.com OsteoRemedies.com

OsteoRemedies, LLC 6800 Poplar Avenue Suite 120 Memphis, TN 38138

Specifically designed formulation to work effectively with REMEDY ® Spacers

UNITE® AB BONE CEMENT

UNITE® AB Bone Cement

is a high-viscosity,

radiopaque bone cement

containing and releasing

gentamicin sulphate for

manual application.

UNITE® AB Bone Cement

is a single-use, sterile

medical device provided

in doses of 40g. UNITE® AB

Bone Cement contains

1 gram of gentamicin

per 40 gram dose versus

0.5 grams in Palacos R+G.

Gentamicin in Powder

Gentamicin in Resin

1g Gentamicin 0.5g Gentamicin

2.5%

1.8%

1.25%

0.84%

UNITE Cement

® Palacos RGentamicin

®

60”

30”

Product Mixing Waiting Working Setting Total

UNITE Cement

®

Palacos R+G

90”

30”

4’

4’

3’

3’30”

9’30”

8’30”

With a lower ratio of monomer to powder as compared to market leading bone cement mixtures, UNITE® provides benefits such as:

– Lower maximum temperature from the chemical reaction may reduce the risk to surrounding tissues.

– Reduced toxicity for those handling the cement.

– Reduced cement shrinkage may improve implant fixation.

Palacos is a registered trademark of Heraeus Medical GmbH

Approximate set time as tested at 74° F.

OsteoRemedies, REMEDY, UNITE and the corporate mark are registered trademarks of OsteoRemedies, LLC • REMEDY and UNITE are manufactured for OsteoRemedies, LLC • ©2017 • 5-17-V9

(G)

UNITE AB Bone Cement 40

Catalog #

UNITE40

Description

®